1 /* 2 * Regular cardbus driver ("yenta_socket") 3 * 4 * (C) Copyright 1999, 2000 Linus Torvalds 5 * 6 * Changelog: 7 * Aug 2002: Manfred Spraul <manfred@colorfullife.com> 8 * Dynamically adjust the size of the bridge resource 9 * 10 * May 2003: Dominik Brodowski <linux@brodo.de> 11 * Merge pci_socket.c and yenta.c into one file 12 */ 13 #include <linux/init.h> 14 #include <linux/pci.h> 15 #include <linux/workqueue.h> 16 #include <linux/interrupt.h> 17 #include <linux/delay.h> 18 #include <linux/module.h> 19 #include <linux/io.h> 20 #include <linux/slab.h> 21 22 #include <pcmcia/ss.h> 23 24 #include "yenta_socket.h" 25 #include "i82365.h" 26 27 static bool disable_clkrun; 28 module_param(disable_clkrun, bool, 0444); 29 MODULE_PARM_DESC(disable_clkrun, "If PC card doesn't function properly, please try this option"); 30 31 static bool isa_probe = 1; 32 module_param(isa_probe, bool, 0444); 33 MODULE_PARM_DESC(isa_probe, "If set ISA interrupts are probed (default). Set to N to disable probing"); 34 35 static bool pwr_irqs_off; 36 module_param(pwr_irqs_off, bool, 0644); 37 MODULE_PARM_DESC(pwr_irqs_off, "Force IRQs off during power-on of slot. Use only when seeing IRQ storms!"); 38 39 static char o2_speedup[] = "default"; 40 module_param_string(o2_speedup, o2_speedup, sizeof(o2_speedup), 0444); 41 MODULE_PARM_DESC(o2_speedup, "Use prefetch/burst for O2-bridges: 'on', 'off' " 42 "or 'default' (uses recommended behaviour for the detected bridge)"); 43 44 /* 45 * Only probe "regular" interrupts, don't 46 * touch dangerous spots like the mouse irq, 47 * because there are mice that apparently 48 * get really confused if they get fondled 49 * too intimately. 50 * 51 * Default to 11, 10, 9, 7, 6, 5, 4, 3. 52 */ 53 static u32 isa_interrupts = 0x0ef8; 54 55 56 #define debug(x, s, args...) dev_dbg(&s->dev->dev, x, ##args) 57 58 /* Don't ask.. */ 59 #define to_cycles(ns) ((ns)/120) 60 #define to_ns(cycles) ((cycles)*120) 61 62 /* 63 * yenta PCI irq probing. 64 * currently only used in the TI/EnE initialization code 65 */ 66 #ifdef CONFIG_YENTA_TI 67 static int yenta_probe_cb_irq(struct yenta_socket *socket); 68 static unsigned int yenta_probe_irq(struct yenta_socket *socket, 69 u32 isa_irq_mask); 70 #endif 71 72 73 static unsigned int override_bios; 74 module_param(override_bios, uint, 0000); 75 MODULE_PARM_DESC(override_bios, "yenta ignore bios resource allocation"); 76 77 /* 78 * Generate easy-to-use ways of reading a cardbus sockets 79 * regular memory space ("cb_xxx"), configuration space 80 * ("config_xxx") and compatibility space ("exca_xxxx") 81 */ 82 static inline u32 cb_readl(struct yenta_socket *socket, unsigned reg) 83 { 84 u32 val = readl(socket->base + reg); 85 debug("%04x %08x\n", socket, reg, val); 86 return val; 87 } 88 89 static inline void cb_writel(struct yenta_socket *socket, unsigned reg, u32 val) 90 { 91 debug("%04x %08x\n", socket, reg, val); 92 writel(val, socket->base + reg); 93 readl(socket->base + reg); /* avoid problems with PCI write posting */ 94 } 95 96 static inline u8 config_readb(struct yenta_socket *socket, unsigned offset) 97 { 98 u8 val; 99 pci_read_config_byte(socket->dev, offset, &val); 100 debug("%04x %02x\n", socket, offset, val); 101 return val; 102 } 103 104 static inline u16 config_readw(struct yenta_socket *socket, unsigned offset) 105 { 106 u16 val; 107 pci_read_config_word(socket->dev, offset, &val); 108 debug("%04x %04x\n", socket, offset, val); 109 return val; 110 } 111 112 static inline u32 config_readl(struct yenta_socket *socket, unsigned offset) 113 { 114 u32 val; 115 pci_read_config_dword(socket->dev, offset, &val); 116 debug("%04x %08x\n", socket, offset, val); 117 return val; 118 } 119 120 static inline void config_writeb(struct yenta_socket *socket, unsigned offset, u8 val) 121 { 122 debug("%04x %02x\n", socket, offset, val); 123 pci_write_config_byte(socket->dev, offset, val); 124 } 125 126 static inline void config_writew(struct yenta_socket *socket, unsigned offset, u16 val) 127 { 128 debug("%04x %04x\n", socket, offset, val); 129 pci_write_config_word(socket->dev, offset, val); 130 } 131 132 static inline void config_writel(struct yenta_socket *socket, unsigned offset, u32 val) 133 { 134 debug("%04x %08x\n", socket, offset, val); 135 pci_write_config_dword(socket->dev, offset, val); 136 } 137 138 static inline u8 exca_readb(struct yenta_socket *socket, unsigned reg) 139 { 140 u8 val = readb(socket->base + 0x800 + reg); 141 debug("%04x %02x\n", socket, reg, val); 142 return val; 143 } 144 145 static inline u8 exca_readw(struct yenta_socket *socket, unsigned reg) 146 { 147 u16 val; 148 val = readb(socket->base + 0x800 + reg); 149 val |= readb(socket->base + 0x800 + reg + 1) << 8; 150 debug("%04x %04x\n", socket, reg, val); 151 return val; 152 } 153 154 static inline void exca_writeb(struct yenta_socket *socket, unsigned reg, u8 val) 155 { 156 debug("%04x %02x\n", socket, reg, val); 157 writeb(val, socket->base + 0x800 + reg); 158 readb(socket->base + 0x800 + reg); /* PCI write posting... */ 159 } 160 161 static void exca_writew(struct yenta_socket *socket, unsigned reg, u16 val) 162 { 163 debug("%04x %04x\n", socket, reg, val); 164 writeb(val, socket->base + 0x800 + reg); 165 writeb(val >> 8, socket->base + 0x800 + reg + 1); 166 167 /* PCI write posting... */ 168 readb(socket->base + 0x800 + reg); 169 readb(socket->base + 0x800 + reg + 1); 170 } 171 172 static ssize_t show_yenta_registers(struct device *yentadev, struct device_attribute *attr, char *buf) 173 { 174 struct pci_dev *dev = to_pci_dev(yentadev); 175 struct yenta_socket *socket = pci_get_drvdata(dev); 176 int offset = 0, i; 177 178 offset = snprintf(buf, PAGE_SIZE, "CB registers:"); 179 for (i = 0; i < 0x24; i += 4) { 180 unsigned val; 181 if (!(i & 15)) 182 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); 183 val = cb_readl(socket, i); 184 offset += snprintf(buf + offset, PAGE_SIZE - offset, " %08x", val); 185 } 186 187 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n\nExCA registers:"); 188 for (i = 0; i < 0x45; i++) { 189 unsigned char val; 190 if (!(i & 7)) { 191 if (i & 8) { 192 memcpy(buf + offset, " -", 2); 193 offset += 2; 194 } else 195 offset += snprintf(buf + offset, PAGE_SIZE - offset, "\n%02x:", i); 196 } 197 val = exca_readb(socket, i); 198 offset += snprintf(buf + offset, PAGE_SIZE - offset, " %02x", val); 199 } 200 buf[offset++] = '\n'; 201 return offset; 202 } 203 204 static DEVICE_ATTR(yenta_registers, S_IRUSR, show_yenta_registers, NULL); 205 206 /* 207 * Ugh, mixed-mode cardbus and 16-bit pccard state: things depend 208 * on what kind of card is inserted.. 209 */ 210 static int yenta_get_status(struct pcmcia_socket *sock, unsigned int *value) 211 { 212 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 213 unsigned int val; 214 u32 state = cb_readl(socket, CB_SOCKET_STATE); 215 216 val = (state & CB_3VCARD) ? SS_3VCARD : 0; 217 val |= (state & CB_XVCARD) ? SS_XVCARD : 0; 218 val |= (state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) ? 0 : SS_PENDING; 219 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? SS_PENDING : 0; 220 221 222 if (state & CB_CBCARD) { 223 val |= SS_CARDBUS; 224 val |= (state & CB_CARDSTS) ? SS_STSCHG : 0; 225 val |= (state & (CB_CDETECT1 | CB_CDETECT2)) ? 0 : SS_DETECT; 226 val |= (state & CB_PWRCYCLE) ? SS_POWERON | SS_READY : 0; 227 } else if (state & CB_16BITCARD) { 228 u8 status = exca_readb(socket, I365_STATUS); 229 val |= ((status & I365_CS_DETECT) == I365_CS_DETECT) ? SS_DETECT : 0; 230 if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) { 231 val |= (status & I365_CS_STSCHG) ? 0 : SS_STSCHG; 232 } else { 233 val |= (status & I365_CS_BVD1) ? 0 : SS_BATDEAD; 234 val |= (status & I365_CS_BVD2) ? 0 : SS_BATWARN; 235 } 236 val |= (status & I365_CS_WRPROT) ? SS_WRPROT : 0; 237 val |= (status & I365_CS_READY) ? SS_READY : 0; 238 val |= (status & I365_CS_POWERON) ? SS_POWERON : 0; 239 } 240 241 *value = val; 242 return 0; 243 } 244 245 static void yenta_set_power(struct yenta_socket *socket, socket_state_t *state) 246 { 247 /* some birdges require to use the ExCA registers to power 16bit cards */ 248 if (!(cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) && 249 (socket->flags & YENTA_16BIT_POWER_EXCA)) { 250 u8 reg, old; 251 reg = old = exca_readb(socket, I365_POWER); 252 reg &= ~(I365_VCC_MASK | I365_VPP1_MASK | I365_VPP2_MASK); 253 254 /* i82365SL-DF style */ 255 if (socket->flags & YENTA_16BIT_POWER_DF) { 256 switch (state->Vcc) { 257 case 33: 258 reg |= I365_VCC_3V; 259 break; 260 case 50: 261 reg |= I365_VCC_5V; 262 break; 263 default: 264 reg = 0; 265 break; 266 } 267 switch (state->Vpp) { 268 case 33: 269 case 50: 270 reg |= I365_VPP1_5V; 271 break; 272 case 120: 273 reg |= I365_VPP1_12V; 274 break; 275 } 276 } else { 277 /* i82365SL-B style */ 278 switch (state->Vcc) { 279 case 50: 280 reg |= I365_VCC_5V; 281 break; 282 default: 283 reg = 0; 284 break; 285 } 286 switch (state->Vpp) { 287 case 50: 288 reg |= I365_VPP1_5V | I365_VPP2_5V; 289 break; 290 case 120: 291 reg |= I365_VPP1_12V | I365_VPP2_12V; 292 break; 293 } 294 } 295 296 if (reg != old) 297 exca_writeb(socket, I365_POWER, reg); 298 } else { 299 u32 reg = 0; /* CB_SC_STPCLK? */ 300 switch (state->Vcc) { 301 case 33: 302 reg = CB_SC_VCC_3V; 303 break; 304 case 50: 305 reg = CB_SC_VCC_5V; 306 break; 307 default: 308 reg = 0; 309 break; 310 } 311 switch (state->Vpp) { 312 case 33: 313 reg |= CB_SC_VPP_3V; 314 break; 315 case 50: 316 reg |= CB_SC_VPP_5V; 317 break; 318 case 120: 319 reg |= CB_SC_VPP_12V; 320 break; 321 } 322 if (reg != cb_readl(socket, CB_SOCKET_CONTROL)) 323 cb_writel(socket, CB_SOCKET_CONTROL, reg); 324 } 325 } 326 327 static int yenta_set_socket(struct pcmcia_socket *sock, socket_state_t *state) 328 { 329 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 330 u16 bridge; 331 332 /* if powering down: do it immediately */ 333 if (state->Vcc == 0) 334 yenta_set_power(socket, state); 335 336 socket->io_irq = state->io_irq; 337 bridge = config_readw(socket, CB_BRIDGE_CONTROL) & ~(CB_BRIDGE_CRST | CB_BRIDGE_INTR); 338 if (cb_readl(socket, CB_SOCKET_STATE) & CB_CBCARD) { 339 u8 intr; 340 bridge |= (state->flags & SS_RESET) ? CB_BRIDGE_CRST : 0; 341 342 /* ISA interrupt control? */ 343 intr = exca_readb(socket, I365_INTCTL); 344 intr = (intr & ~0xf); 345 if (!socket->dev->irq) { 346 intr |= socket->cb_irq ? socket->cb_irq : state->io_irq; 347 bridge |= CB_BRIDGE_INTR; 348 } 349 exca_writeb(socket, I365_INTCTL, intr); 350 } else { 351 u8 reg; 352 353 reg = exca_readb(socket, I365_INTCTL) & (I365_RING_ENA | I365_INTR_ENA); 354 reg |= (state->flags & SS_RESET) ? 0 : I365_PC_RESET; 355 reg |= (state->flags & SS_IOCARD) ? I365_PC_IOCARD : 0; 356 if (state->io_irq != socket->dev->irq) { 357 reg |= state->io_irq; 358 bridge |= CB_BRIDGE_INTR; 359 } 360 exca_writeb(socket, I365_INTCTL, reg); 361 362 reg = exca_readb(socket, I365_POWER) & (I365_VCC_MASK|I365_VPP1_MASK); 363 reg |= I365_PWR_NORESET; 364 if (state->flags & SS_PWR_AUTO) 365 reg |= I365_PWR_AUTO; 366 if (state->flags & SS_OUTPUT_ENA) 367 reg |= I365_PWR_OUT; 368 if (exca_readb(socket, I365_POWER) != reg) 369 exca_writeb(socket, I365_POWER, reg); 370 371 /* CSC interrupt: no ISA irq for CSC */ 372 reg = exca_readb(socket, I365_CSCINT); 373 reg &= I365_CSC_IRQ_MASK; 374 reg |= I365_CSC_DETECT; 375 if (state->flags & SS_IOCARD) { 376 if (state->csc_mask & SS_STSCHG) 377 reg |= I365_CSC_STSCHG; 378 } else { 379 if (state->csc_mask & SS_BATDEAD) 380 reg |= I365_CSC_BVD1; 381 if (state->csc_mask & SS_BATWARN) 382 reg |= I365_CSC_BVD2; 383 if (state->csc_mask & SS_READY) 384 reg |= I365_CSC_READY; 385 } 386 exca_writeb(socket, I365_CSCINT, reg); 387 exca_readb(socket, I365_CSC); 388 if (sock->zoom_video) 389 sock->zoom_video(sock, state->flags & SS_ZVCARD); 390 } 391 config_writew(socket, CB_BRIDGE_CONTROL, bridge); 392 /* Socket event mask: get card insert/remove events.. */ 393 cb_writel(socket, CB_SOCKET_EVENT, -1); 394 cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK); 395 396 /* if powering up: do it as the last step when the socket is configured */ 397 if (state->Vcc != 0) 398 yenta_set_power(socket, state); 399 return 0; 400 } 401 402 static int yenta_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *io) 403 { 404 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 405 int map; 406 unsigned char ioctl, addr, enable; 407 408 map = io->map; 409 410 if (map > 1) 411 return -EINVAL; 412 413 enable = I365_ENA_IO(map); 414 addr = exca_readb(socket, I365_ADDRWIN); 415 416 /* Disable the window before changing it.. */ 417 if (addr & enable) { 418 addr &= ~enable; 419 exca_writeb(socket, I365_ADDRWIN, addr); 420 } 421 422 exca_writew(socket, I365_IO(map)+I365_W_START, io->start); 423 exca_writew(socket, I365_IO(map)+I365_W_STOP, io->stop); 424 425 ioctl = exca_readb(socket, I365_IOCTL) & ~I365_IOCTL_MASK(map); 426 if (io->flags & MAP_0WS) 427 ioctl |= I365_IOCTL_0WS(map); 428 if (io->flags & MAP_16BIT) 429 ioctl |= I365_IOCTL_16BIT(map); 430 if (io->flags & MAP_AUTOSZ) 431 ioctl |= I365_IOCTL_IOCS16(map); 432 exca_writeb(socket, I365_IOCTL, ioctl); 433 434 if (io->flags & MAP_ACTIVE) 435 exca_writeb(socket, I365_ADDRWIN, addr | enable); 436 return 0; 437 } 438 439 static int yenta_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *mem) 440 { 441 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 442 struct pci_bus_region region; 443 int map; 444 unsigned char addr, enable; 445 unsigned int start, stop, card_start; 446 unsigned short word; 447 448 pcibios_resource_to_bus(socket->dev->bus, ®ion, mem->res); 449 450 map = mem->map; 451 start = region.start; 452 stop = region.end; 453 card_start = mem->card_start; 454 455 if (map > 4 || start > stop || ((start ^ stop) >> 24) || 456 (card_start >> 26) || mem->speed > 1000) 457 return -EINVAL; 458 459 enable = I365_ENA_MEM(map); 460 addr = exca_readb(socket, I365_ADDRWIN); 461 if (addr & enable) { 462 addr &= ~enable; 463 exca_writeb(socket, I365_ADDRWIN, addr); 464 } 465 466 exca_writeb(socket, CB_MEM_PAGE(map), start >> 24); 467 468 word = (start >> 12) & 0x0fff; 469 if (mem->flags & MAP_16BIT) 470 word |= I365_MEM_16BIT; 471 if (mem->flags & MAP_0WS) 472 word |= I365_MEM_0WS; 473 exca_writew(socket, I365_MEM(map) + I365_W_START, word); 474 475 word = (stop >> 12) & 0x0fff; 476 switch (to_cycles(mem->speed)) { 477 case 0: 478 break; 479 case 1: 480 word |= I365_MEM_WS0; 481 break; 482 case 2: 483 word |= I365_MEM_WS1; 484 break; 485 default: 486 word |= I365_MEM_WS1 | I365_MEM_WS0; 487 break; 488 } 489 exca_writew(socket, I365_MEM(map) + I365_W_STOP, word); 490 491 word = ((card_start - start) >> 12) & 0x3fff; 492 if (mem->flags & MAP_WRPROT) 493 word |= I365_MEM_WRPROT; 494 if (mem->flags & MAP_ATTRIB) 495 word |= I365_MEM_REG; 496 exca_writew(socket, I365_MEM(map) + I365_W_OFF, word); 497 498 if (mem->flags & MAP_ACTIVE) 499 exca_writeb(socket, I365_ADDRWIN, addr | enable); 500 return 0; 501 } 502 503 504 505 static irqreturn_t yenta_interrupt(int irq, void *dev_id) 506 { 507 unsigned int events; 508 struct yenta_socket *socket = (struct yenta_socket *) dev_id; 509 u8 csc; 510 u32 cb_event; 511 512 /* Clear interrupt status for the event */ 513 cb_event = cb_readl(socket, CB_SOCKET_EVENT); 514 cb_writel(socket, CB_SOCKET_EVENT, cb_event); 515 516 csc = exca_readb(socket, I365_CSC); 517 518 if (!(cb_event || csc)) 519 return IRQ_NONE; 520 521 events = (cb_event & (CB_CD1EVENT | CB_CD2EVENT)) ? SS_DETECT : 0 ; 522 events |= (csc & I365_CSC_DETECT) ? SS_DETECT : 0; 523 if (exca_readb(socket, I365_INTCTL) & I365_PC_IOCARD) { 524 events |= (csc & I365_CSC_STSCHG) ? SS_STSCHG : 0; 525 } else { 526 events |= (csc & I365_CSC_BVD1) ? SS_BATDEAD : 0; 527 events |= (csc & I365_CSC_BVD2) ? SS_BATWARN : 0; 528 events |= (csc & I365_CSC_READY) ? SS_READY : 0; 529 } 530 531 if (events) 532 pcmcia_parse_events(&socket->socket, events); 533 534 return IRQ_HANDLED; 535 } 536 537 static void yenta_interrupt_wrapper(unsigned long data) 538 { 539 struct yenta_socket *socket = (struct yenta_socket *) data; 540 541 yenta_interrupt(0, (void *)socket); 542 socket->poll_timer.expires = jiffies + HZ; 543 add_timer(&socket->poll_timer); 544 } 545 546 static void yenta_clear_maps(struct yenta_socket *socket) 547 { 548 int i; 549 struct resource res = { .start = 0, .end = 0x0fff }; 550 pccard_io_map io = { 0, 0, 0, 0, 1 }; 551 pccard_mem_map mem = { .res = &res, }; 552 553 yenta_set_socket(&socket->socket, &dead_socket); 554 for (i = 0; i < 2; i++) { 555 io.map = i; 556 yenta_set_io_map(&socket->socket, &io); 557 } 558 for (i = 0; i < 5; i++) { 559 mem.map = i; 560 yenta_set_mem_map(&socket->socket, &mem); 561 } 562 } 563 564 /* redoes voltage interrogation if required */ 565 static void yenta_interrogate(struct yenta_socket *socket) 566 { 567 u32 state; 568 569 state = cb_readl(socket, CB_SOCKET_STATE); 570 if (!(state & (CB_5VCARD | CB_3VCARD | CB_XVCARD | CB_YVCARD)) || 571 (state & (CB_CDETECT1 | CB_CDETECT2 | CB_NOTACARD | CB_BADVCCREQ)) || 572 ((state & (CB_16BITCARD | CB_CBCARD)) == (CB_16BITCARD | CB_CBCARD))) 573 cb_writel(socket, CB_SOCKET_FORCE, CB_CVSTEST); 574 } 575 576 /* Called at resume and initialization events */ 577 static int yenta_sock_init(struct pcmcia_socket *sock) 578 { 579 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 580 581 exca_writeb(socket, I365_GBLCTL, 0x00); 582 exca_writeb(socket, I365_GENCTL, 0x00); 583 584 /* Redo card voltage interrogation */ 585 yenta_interrogate(socket); 586 587 yenta_clear_maps(socket); 588 589 if (socket->type && socket->type->sock_init) 590 socket->type->sock_init(socket); 591 592 /* Re-enable CSC interrupts */ 593 cb_writel(socket, CB_SOCKET_MASK, CB_CDMASK); 594 595 return 0; 596 } 597 598 static int yenta_sock_suspend(struct pcmcia_socket *sock) 599 { 600 struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); 601 602 /* Disable CSC interrupts */ 603 cb_writel(socket, CB_SOCKET_MASK, 0x0); 604 605 return 0; 606 } 607 608 /* 609 * Use an adaptive allocation for the memory resource, 610 * sometimes the memory behind pci bridges is limited: 611 * 1/8 of the size of the io window of the parent. 612 * max 4 MB, min 16 kB. We try very hard to not get below 613 * the "ACC" values, though. 614 */ 615 #define BRIDGE_MEM_MAX (4*1024*1024) 616 #define BRIDGE_MEM_ACC (128*1024) 617 #define BRIDGE_MEM_MIN (16*1024) 618 619 #define BRIDGE_IO_MAX 512 620 #define BRIDGE_IO_ACC 256 621 #define BRIDGE_IO_MIN 32 622 623 #ifndef PCIBIOS_MIN_CARDBUS_IO 624 #define PCIBIOS_MIN_CARDBUS_IO PCIBIOS_MIN_IO 625 #endif 626 627 static int yenta_search_one_res(struct resource *root, struct resource *res, 628 u32 min) 629 { 630 u32 align, size, start, end; 631 632 if (res->flags & IORESOURCE_IO) { 633 align = 1024; 634 size = BRIDGE_IO_MAX; 635 start = PCIBIOS_MIN_CARDBUS_IO; 636 end = ~0U; 637 } else { 638 unsigned long avail = root->end - root->start; 639 int i; 640 size = BRIDGE_MEM_MAX; 641 if (size > avail/8) { 642 size = (avail+1)/8; 643 /* round size down to next power of 2 */ 644 i = 0; 645 while ((size /= 2) != 0) 646 i++; 647 size = 1 << i; 648 } 649 if (size < min) 650 size = min; 651 align = size; 652 start = PCIBIOS_MIN_MEM; 653 end = ~0U; 654 } 655 656 do { 657 if (allocate_resource(root, res, size, start, end, align, 658 NULL, NULL) == 0) { 659 return 1; 660 } 661 size = size/2; 662 align = size; 663 } while (size >= min); 664 665 return 0; 666 } 667 668 669 static int yenta_search_res(struct yenta_socket *socket, struct resource *res, 670 u32 min) 671 { 672 struct resource *root; 673 int i; 674 675 pci_bus_for_each_resource(socket->dev->bus, root, i) { 676 if (!root) 677 continue; 678 679 if ((res->flags ^ root->flags) & 680 (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH)) 681 continue; /* Wrong type */ 682 683 if (yenta_search_one_res(root, res, min)) 684 return 1; 685 } 686 return 0; 687 } 688 689 static int yenta_allocate_res(struct yenta_socket *socket, int nr, unsigned type, int addr_start, int addr_end) 690 { 691 struct pci_dev *dev = socket->dev; 692 struct resource *res; 693 struct pci_bus_region region; 694 unsigned mask; 695 696 res = dev->resource + PCI_BRIDGE_RESOURCES + nr; 697 /* Already allocated? */ 698 if (res->parent) 699 return 0; 700 701 /* The granularity of the memory limit is 4kB, on IO it's 4 bytes */ 702 mask = ~0xfff; 703 if (type & IORESOURCE_IO) 704 mask = ~3; 705 706 res->name = dev->subordinate->name; 707 res->flags = type; 708 709 region.start = config_readl(socket, addr_start) & mask; 710 region.end = config_readl(socket, addr_end) | ~mask; 711 if (region.start && region.end > region.start && !override_bios) { 712 pcibios_bus_to_resource(dev->bus, res, ®ion); 713 if (pci_claim_resource(dev, PCI_BRIDGE_RESOURCES + nr) == 0) 714 return 0; 715 dev_info(&dev->dev, 716 "Preassigned resource %d busy or not available, reconfiguring...\n", 717 nr); 718 } 719 720 if (type & IORESOURCE_IO) { 721 if ((yenta_search_res(socket, res, BRIDGE_IO_MAX)) || 722 (yenta_search_res(socket, res, BRIDGE_IO_ACC)) || 723 (yenta_search_res(socket, res, BRIDGE_IO_MIN))) 724 return 1; 725 } else { 726 if (type & IORESOURCE_PREFETCH) { 727 if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) || 728 (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) || 729 (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) 730 return 1; 731 /* Approximating prefetchable by non-prefetchable */ 732 res->flags = IORESOURCE_MEM; 733 } 734 if ((yenta_search_res(socket, res, BRIDGE_MEM_MAX)) || 735 (yenta_search_res(socket, res, BRIDGE_MEM_ACC)) || 736 (yenta_search_res(socket, res, BRIDGE_MEM_MIN))) 737 return 1; 738 } 739 740 dev_info(&dev->dev, 741 "no resource of type %x available, trying to continue...\n", 742 type); 743 res->start = res->end = res->flags = 0; 744 return 0; 745 } 746 747 /* 748 * Allocate the bridge mappings for the device.. 749 */ 750 static void yenta_allocate_resources(struct yenta_socket *socket) 751 { 752 int program = 0; 753 program += yenta_allocate_res(socket, 0, IORESOURCE_IO, 754 PCI_CB_IO_BASE_0, PCI_CB_IO_LIMIT_0); 755 program += yenta_allocate_res(socket, 1, IORESOURCE_IO, 756 PCI_CB_IO_BASE_1, PCI_CB_IO_LIMIT_1); 757 program += yenta_allocate_res(socket, 2, IORESOURCE_MEM|IORESOURCE_PREFETCH, 758 PCI_CB_MEMORY_BASE_0, PCI_CB_MEMORY_LIMIT_0); 759 program += yenta_allocate_res(socket, 3, IORESOURCE_MEM, 760 PCI_CB_MEMORY_BASE_1, PCI_CB_MEMORY_LIMIT_1); 761 if (program) 762 pci_setup_cardbus(socket->dev->subordinate); 763 } 764 765 766 /* 767 * Free the bridge mappings for the device.. 768 */ 769 static void yenta_free_resources(struct yenta_socket *socket) 770 { 771 int i; 772 for (i = 0; i < 4; i++) { 773 struct resource *res; 774 res = socket->dev->resource + PCI_BRIDGE_RESOURCES + i; 775 if (res->start != 0 && res->end != 0) 776 release_resource(res); 777 res->start = res->end = res->flags = 0; 778 } 779 } 780 781 782 /* 783 * Close it down - release our resources and go home.. 784 */ 785 static void yenta_close(struct pci_dev *dev) 786 { 787 struct yenta_socket *sock = pci_get_drvdata(dev); 788 789 /* Remove the register attributes */ 790 device_remove_file(&dev->dev, &dev_attr_yenta_registers); 791 792 /* we don't want a dying socket registered */ 793 pcmcia_unregister_socket(&sock->socket); 794 795 /* Disable all events so we don't die in an IRQ storm */ 796 cb_writel(sock, CB_SOCKET_MASK, 0x0); 797 exca_writeb(sock, I365_CSCINT, 0); 798 799 if (sock->cb_irq) 800 free_irq(sock->cb_irq, sock); 801 else 802 del_timer_sync(&sock->poll_timer); 803 804 iounmap(sock->base); 805 yenta_free_resources(sock); 806 807 pci_release_regions(dev); 808 pci_disable_device(dev); 809 pci_set_drvdata(dev, NULL); 810 kfree(sock); 811 } 812 813 814 static struct pccard_operations yenta_socket_operations = { 815 .init = yenta_sock_init, 816 .suspend = yenta_sock_suspend, 817 .get_status = yenta_get_status, 818 .set_socket = yenta_set_socket, 819 .set_io_map = yenta_set_io_map, 820 .set_mem_map = yenta_set_mem_map, 821 }; 822 823 824 #ifdef CONFIG_YENTA_TI 825 #include "ti113x.h" 826 #endif 827 #ifdef CONFIG_YENTA_RICOH 828 #include "ricoh.h" 829 #endif 830 #ifdef CONFIG_YENTA_TOSHIBA 831 #include "topic.h" 832 #endif 833 #ifdef CONFIG_YENTA_O2 834 #include "o2micro.h" 835 #endif 836 837 enum { 838 CARDBUS_TYPE_DEFAULT = -1, 839 CARDBUS_TYPE_TI, 840 CARDBUS_TYPE_TI113X, 841 CARDBUS_TYPE_TI12XX, 842 CARDBUS_TYPE_TI1250, 843 CARDBUS_TYPE_RICOH, 844 CARDBUS_TYPE_TOPIC95, 845 CARDBUS_TYPE_TOPIC97, 846 CARDBUS_TYPE_O2MICRO, 847 CARDBUS_TYPE_ENE, 848 }; 849 850 /* 851 * Different cardbus controllers have slightly different 852 * initialization sequences etc details. List them here.. 853 */ 854 static struct cardbus_type cardbus_type[] = { 855 #ifdef CONFIG_YENTA_TI 856 [CARDBUS_TYPE_TI] = { 857 .override = ti_override, 858 .save_state = ti_save_state, 859 .restore_state = ti_restore_state, 860 .sock_init = ti_init, 861 }, 862 [CARDBUS_TYPE_TI113X] = { 863 .override = ti113x_override, 864 .save_state = ti_save_state, 865 .restore_state = ti_restore_state, 866 .sock_init = ti_init, 867 }, 868 [CARDBUS_TYPE_TI12XX] = { 869 .override = ti12xx_override, 870 .save_state = ti_save_state, 871 .restore_state = ti_restore_state, 872 .sock_init = ti_init, 873 }, 874 [CARDBUS_TYPE_TI1250] = { 875 .override = ti1250_override, 876 .save_state = ti_save_state, 877 .restore_state = ti_restore_state, 878 .sock_init = ti_init, 879 }, 880 [CARDBUS_TYPE_ENE] = { 881 .override = ene_override, 882 .save_state = ti_save_state, 883 .restore_state = ti_restore_state, 884 .sock_init = ti_init, 885 }, 886 #endif 887 #ifdef CONFIG_YENTA_RICOH 888 [CARDBUS_TYPE_RICOH] = { 889 .override = ricoh_override, 890 .save_state = ricoh_save_state, 891 .restore_state = ricoh_restore_state, 892 }, 893 #endif 894 #ifdef CONFIG_YENTA_TOSHIBA 895 [CARDBUS_TYPE_TOPIC95] = { 896 .override = topic95_override, 897 }, 898 [CARDBUS_TYPE_TOPIC97] = { 899 .override = topic97_override, 900 }, 901 #endif 902 #ifdef CONFIG_YENTA_O2 903 [CARDBUS_TYPE_O2MICRO] = { 904 .override = o2micro_override, 905 .restore_state = o2micro_restore_state, 906 }, 907 #endif 908 }; 909 910 911 static unsigned int yenta_probe_irq(struct yenta_socket *socket, u32 isa_irq_mask) 912 { 913 int i; 914 unsigned long val; 915 u32 mask; 916 u8 reg; 917 918 /* 919 * Probe for usable interrupts using the force 920 * register to generate bogus card status events. 921 */ 922 cb_writel(socket, CB_SOCKET_EVENT, -1); 923 cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); 924 reg = exca_readb(socket, I365_CSCINT); 925 exca_writeb(socket, I365_CSCINT, 0); 926 val = probe_irq_on() & isa_irq_mask; 927 for (i = 1; i < 16; i++) { 928 if (!((val >> i) & 1)) 929 continue; 930 exca_writeb(socket, I365_CSCINT, I365_CSC_STSCHG | (i << 4)); 931 cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS); 932 udelay(100); 933 cb_writel(socket, CB_SOCKET_EVENT, -1); 934 } 935 cb_writel(socket, CB_SOCKET_MASK, 0); 936 exca_writeb(socket, I365_CSCINT, reg); 937 938 mask = probe_irq_mask(val) & 0xffff; 939 940 return mask; 941 } 942 943 944 /* 945 * yenta PCI irq probing. 946 * currently only used in the TI/EnE initialization code 947 */ 948 #ifdef CONFIG_YENTA_TI 949 950 /* interrupt handler, only used during probing */ 951 static irqreturn_t yenta_probe_handler(int irq, void *dev_id) 952 { 953 struct yenta_socket *socket = (struct yenta_socket *) dev_id; 954 u8 csc; 955 u32 cb_event; 956 957 /* Clear interrupt status for the event */ 958 cb_event = cb_readl(socket, CB_SOCKET_EVENT); 959 cb_writel(socket, CB_SOCKET_EVENT, -1); 960 csc = exca_readb(socket, I365_CSC); 961 962 if (cb_event || csc) { 963 socket->probe_status = 1; 964 return IRQ_HANDLED; 965 } 966 967 return IRQ_NONE; 968 } 969 970 /* probes the PCI interrupt, use only on override functions */ 971 static int yenta_probe_cb_irq(struct yenta_socket *socket) 972 { 973 u8 reg = 0; 974 975 if (!socket->cb_irq) 976 return -1; 977 978 socket->probe_status = 0; 979 980 if (request_irq(socket->cb_irq, yenta_probe_handler, IRQF_SHARED, "yenta", socket)) { 981 dev_warn(&socket->dev->dev, 982 "request_irq() in yenta_probe_cb_irq() failed!\n"); 983 return -1; 984 } 985 986 /* generate interrupt, wait */ 987 if (!socket->dev->irq) 988 reg = exca_readb(socket, I365_CSCINT); 989 exca_writeb(socket, I365_CSCINT, reg | I365_CSC_STSCHG); 990 cb_writel(socket, CB_SOCKET_EVENT, -1); 991 cb_writel(socket, CB_SOCKET_MASK, CB_CSTSMASK); 992 cb_writel(socket, CB_SOCKET_FORCE, CB_FCARDSTS); 993 994 msleep(100); 995 996 /* disable interrupts */ 997 cb_writel(socket, CB_SOCKET_MASK, 0); 998 exca_writeb(socket, I365_CSCINT, reg); 999 cb_writel(socket, CB_SOCKET_EVENT, -1); 1000 exca_readb(socket, I365_CSC); 1001 1002 free_irq(socket->cb_irq, socket); 1003 1004 return (int) socket->probe_status; 1005 } 1006 1007 #endif /* CONFIG_YENTA_TI */ 1008 1009 1010 /* 1011 * Set static data that doesn't need re-initializing.. 1012 */ 1013 static void yenta_get_socket_capabilities(struct yenta_socket *socket, u32 isa_irq_mask) 1014 { 1015 socket->socket.pci_irq = socket->cb_irq; 1016 if (isa_probe) 1017 socket->socket.irq_mask = yenta_probe_irq(socket, isa_irq_mask); 1018 else 1019 socket->socket.irq_mask = 0; 1020 1021 dev_info(&socket->dev->dev, "ISA IRQ mask 0x%04x, PCI irq %d\n", 1022 socket->socket.irq_mask, socket->cb_irq); 1023 } 1024 1025 /* 1026 * Initialize the standard cardbus registers 1027 */ 1028 static void yenta_config_init(struct yenta_socket *socket) 1029 { 1030 u16 bridge; 1031 struct pci_dev *dev = socket->dev; 1032 struct pci_bus_region region; 1033 1034 pcibios_resource_to_bus(socket->dev->bus, ®ion, &dev->resource[0]); 1035 1036 config_writel(socket, CB_LEGACY_MODE_BASE, 0); 1037 config_writel(socket, PCI_BASE_ADDRESS_0, region.start); 1038 config_writew(socket, PCI_COMMAND, 1039 PCI_COMMAND_IO | 1040 PCI_COMMAND_MEMORY | 1041 PCI_COMMAND_MASTER | 1042 PCI_COMMAND_WAIT); 1043 1044 /* MAGIC NUMBERS! Fixme */ 1045 config_writeb(socket, PCI_CACHE_LINE_SIZE, L1_CACHE_BYTES / 4); 1046 config_writeb(socket, PCI_LATENCY_TIMER, 168); 1047 config_writel(socket, PCI_PRIMARY_BUS, 1048 (176 << 24) | /* sec. latency timer */ 1049 ((unsigned int)dev->subordinate->busn_res.end << 16) | /* subordinate bus */ 1050 ((unsigned int)dev->subordinate->busn_res.start << 8) | /* secondary bus */ 1051 dev->subordinate->primary); /* primary bus */ 1052 1053 /* 1054 * Set up the bridging state: 1055 * - enable write posting. 1056 * - memory window 0 prefetchable, window 1 non-prefetchable 1057 * - PCI interrupts enabled if a PCI interrupt exists.. 1058 */ 1059 bridge = config_readw(socket, CB_BRIDGE_CONTROL); 1060 bridge &= ~(CB_BRIDGE_CRST | CB_BRIDGE_PREFETCH1 | CB_BRIDGE_ISAEN | CB_BRIDGE_VGAEN); 1061 bridge |= CB_BRIDGE_PREFETCH0 | CB_BRIDGE_POSTEN; 1062 config_writew(socket, CB_BRIDGE_CONTROL, bridge); 1063 } 1064 1065 /** 1066 * yenta_fixup_parent_bridge - Fix subordinate bus# of the parent bridge 1067 * @cardbus_bridge: The PCI bus which the CardBus bridge bridges to 1068 * 1069 * Checks if devices on the bus which the CardBus bridge bridges to would be 1070 * invisible during PCI scans because of a misconfigured subordinate number 1071 * of the parent brige - some BIOSes seem to be too lazy to set it right. 1072 * Does the fixup carefully by checking how far it can go without conflicts. 1073 * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. 1074 */ 1075 static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) 1076 { 1077 struct pci_bus *sibling; 1078 unsigned char upper_limit; 1079 /* 1080 * We only check and fix the parent bridge: All systems which need 1081 * this fixup that have been reviewed are laptops and the only bridge 1082 * which needed fixing was the parent bridge of the CardBus bridge: 1083 */ 1084 struct pci_bus *bridge_to_fix = cardbus_bridge->parent; 1085 1086 /* Check bus numbers are already set up correctly: */ 1087 if (bridge_to_fix->busn_res.end >= cardbus_bridge->busn_res.end) 1088 return; /* The subordinate number is ok, nothing to do */ 1089 1090 if (!bridge_to_fix->parent) 1091 return; /* Root bridges are ok */ 1092 1093 /* stay within the limits of the bus range of the parent: */ 1094 upper_limit = bridge_to_fix->parent->busn_res.end; 1095 1096 /* check the bus ranges of all sibling bridges to prevent overlap */ 1097 list_for_each_entry(sibling, &bridge_to_fix->parent->children, 1098 node) { 1099 /* 1100 * If the sibling has a higher secondary bus number 1101 * and it's secondary is equal or smaller than our 1102 * current upper limit, set the new upper limit to 1103 * the bus number below the sibling's range: 1104 */ 1105 if (sibling->busn_res.start > bridge_to_fix->busn_res.end 1106 && sibling->busn_res.start <= upper_limit) 1107 upper_limit = sibling->busn_res.start - 1; 1108 } 1109 1110 /* Show that the wanted subordinate number is not possible: */ 1111 if (cardbus_bridge->busn_res.end > upper_limit) 1112 dev_warn(&cardbus_bridge->dev, 1113 "Upper limit for fixing this bridge's parent bridge: #%02x\n", 1114 upper_limit); 1115 1116 /* If we have room to increase the bridge's subordinate number, */ 1117 if (bridge_to_fix->busn_res.end < upper_limit) { 1118 1119 /* use the highest number of the hidden bus, within limits */ 1120 unsigned char subordinate_to_assign = 1121 min_t(int, cardbus_bridge->busn_res.end, upper_limit); 1122 1123 dev_info(&bridge_to_fix->dev, 1124 "Raising subordinate bus# of parent bus (#%02x) from #%02x to #%02x\n", 1125 bridge_to_fix->number, 1126 (int)bridge_to_fix->busn_res.end, 1127 subordinate_to_assign); 1128 1129 /* Save the new subordinate in the bus struct of the bridge */ 1130 bridge_to_fix->busn_res.end = subordinate_to_assign; 1131 1132 /* and update the PCI config space with the new subordinate */ 1133 pci_write_config_byte(bridge_to_fix->self, 1134 PCI_SUBORDINATE_BUS, bridge_to_fix->busn_res.end); 1135 } 1136 } 1137 1138 /* 1139 * Initialize a cardbus controller. Make sure we have a usable 1140 * interrupt, and that we can map the cardbus area. Fill in the 1141 * socket information structure.. 1142 */ 1143 static int yenta_probe(struct pci_dev *dev, const struct pci_device_id *id) 1144 { 1145 struct yenta_socket *socket; 1146 int ret; 1147 1148 /* 1149 * If we failed to assign proper bus numbers for this cardbus 1150 * controller during PCI probe, its subordinate pci_bus is NULL. 1151 * Bail out if so. 1152 */ 1153 if (!dev->subordinate) { 1154 dev_err(&dev->dev, "no bus associated! (try 'pci=assign-busses')\n"); 1155 return -ENODEV; 1156 } 1157 1158 socket = kzalloc(sizeof(struct yenta_socket), GFP_KERNEL); 1159 if (!socket) 1160 return -ENOMEM; 1161 1162 /* prepare pcmcia_socket */ 1163 socket->socket.ops = ¥ta_socket_operations; 1164 socket->socket.resource_ops = &pccard_nonstatic_ops; 1165 socket->socket.dev.parent = &dev->dev; 1166 socket->socket.driver_data = socket; 1167 socket->socket.owner = THIS_MODULE; 1168 socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD; 1169 socket->socket.map_size = 0x1000; 1170 socket->socket.cb_dev = dev; 1171 1172 /* prepare struct yenta_socket */ 1173 socket->dev = dev; 1174 pci_set_drvdata(dev, socket); 1175 1176 /* 1177 * Do some basic sanity checking.. 1178 */ 1179 if (pci_enable_device(dev)) { 1180 ret = -EBUSY; 1181 goto free; 1182 } 1183 1184 ret = pci_request_regions(dev, "yenta_socket"); 1185 if (ret) 1186 goto disable; 1187 1188 if (!pci_resource_start(dev, 0)) { 1189 dev_err(&dev->dev, "No cardbus resource!\n"); 1190 ret = -ENODEV; 1191 goto release; 1192 } 1193 1194 /* 1195 * Ok, start setup.. Map the cardbus registers, 1196 * and request the IRQ. 1197 */ 1198 socket->base = ioremap(pci_resource_start(dev, 0), 0x1000); 1199 if (!socket->base) { 1200 ret = -ENOMEM; 1201 goto release; 1202 } 1203 1204 /* 1205 * report the subsystem vendor and device for help debugging 1206 * the irq stuff... 1207 */ 1208 dev_info(&dev->dev, "CardBus bridge found [%04x:%04x]\n", 1209 dev->subsystem_vendor, dev->subsystem_device); 1210 1211 yenta_config_init(socket); 1212 1213 /* Disable all events */ 1214 cb_writel(socket, CB_SOCKET_MASK, 0x0); 1215 1216 /* Set up the bridge regions.. */ 1217 yenta_allocate_resources(socket); 1218 1219 socket->cb_irq = dev->irq; 1220 1221 /* Do we have special options for the device? */ 1222 if (id->driver_data != CARDBUS_TYPE_DEFAULT && 1223 id->driver_data < ARRAY_SIZE(cardbus_type)) { 1224 socket->type = &cardbus_type[id->driver_data]; 1225 1226 ret = socket->type->override(socket); 1227 if (ret < 0) 1228 goto unmap; 1229 } 1230 1231 /* We must finish initialization here */ 1232 1233 if (!socket->cb_irq || request_irq(socket->cb_irq, yenta_interrupt, IRQF_SHARED, "yenta", socket)) { 1234 /* No IRQ or request_irq failed. Poll */ 1235 socket->cb_irq = 0; /* But zero is a valid IRQ number. */ 1236 setup_timer(&socket->poll_timer, yenta_interrupt_wrapper, 1237 (unsigned long)socket); 1238 mod_timer(&socket->poll_timer, jiffies + HZ); 1239 dev_info(&dev->dev, 1240 "no PCI IRQ, CardBus support disabled for this socket.\n"); 1241 dev_info(&dev->dev, 1242 "check your BIOS CardBus, BIOS IRQ or ACPI settings.\n"); 1243 } else { 1244 socket->socket.features |= SS_CAP_CARDBUS; 1245 } 1246 1247 /* Figure out what the dang thing can do for the PCMCIA layer... */ 1248 yenta_interrogate(socket); 1249 yenta_get_socket_capabilities(socket, isa_interrupts); 1250 dev_info(&dev->dev, "Socket status: %08x\n", 1251 cb_readl(socket, CB_SOCKET_STATE)); 1252 1253 yenta_fixup_parent_bridge(dev->subordinate); 1254 1255 /* Register it with the pcmcia layer.. */ 1256 ret = pcmcia_register_socket(&socket->socket); 1257 if (ret) 1258 goto free_irq; 1259 1260 /* Add the yenta register attributes */ 1261 ret = device_create_file(&dev->dev, &dev_attr_yenta_registers); 1262 if (ret) 1263 goto unregister_socket; 1264 1265 return ret; 1266 1267 /* error path... */ 1268 unregister_socket: 1269 pcmcia_unregister_socket(&socket->socket); 1270 free_irq: 1271 if (socket->cb_irq) 1272 free_irq(socket->cb_irq, socket); 1273 else 1274 del_timer_sync(&socket->poll_timer); 1275 unmap: 1276 iounmap(socket->base); 1277 yenta_free_resources(socket); 1278 release: 1279 pci_release_regions(dev); 1280 disable: 1281 pci_disable_device(dev); 1282 free: 1283 pci_set_drvdata(dev, NULL); 1284 kfree(socket); 1285 return ret; 1286 } 1287 1288 #ifdef CONFIG_PM 1289 static int yenta_dev_suspend_noirq(struct device *dev) 1290 { 1291 struct pci_dev *pdev = to_pci_dev(dev); 1292 struct yenta_socket *socket = pci_get_drvdata(pdev); 1293 1294 if (!socket) 1295 return 0; 1296 1297 if (socket->type && socket->type->save_state) 1298 socket->type->save_state(socket); 1299 1300 pci_save_state(pdev); 1301 pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]); 1302 pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]); 1303 pci_disable_device(pdev); 1304 1305 return 0; 1306 } 1307 1308 static int yenta_dev_resume_noirq(struct device *dev) 1309 { 1310 struct pci_dev *pdev = to_pci_dev(dev); 1311 struct yenta_socket *socket = pci_get_drvdata(pdev); 1312 int ret; 1313 1314 if (!socket) 1315 return 0; 1316 1317 pci_write_config_dword(pdev, 16*4, socket->saved_state[0]); 1318 pci_write_config_dword(pdev, 17*4, socket->saved_state[1]); 1319 1320 ret = pci_enable_device(pdev); 1321 if (ret) 1322 return ret; 1323 1324 pci_set_master(pdev); 1325 1326 if (socket->type && socket->type->restore_state) 1327 socket->type->restore_state(socket); 1328 1329 return 0; 1330 } 1331 1332 static const struct dev_pm_ops yenta_pm_ops = { 1333 .suspend_noirq = yenta_dev_suspend_noirq, 1334 .resume_noirq = yenta_dev_resume_noirq, 1335 .freeze_noirq = yenta_dev_suspend_noirq, 1336 .thaw_noirq = yenta_dev_resume_noirq, 1337 .poweroff_noirq = yenta_dev_suspend_noirq, 1338 .restore_noirq = yenta_dev_resume_noirq, 1339 }; 1340 1341 #define YENTA_PM_OPS (¥ta_pm_ops) 1342 #else 1343 #define YENTA_PM_OPS NULL 1344 #endif 1345 1346 #define CB_ID(vend, dev, type) \ 1347 { \ 1348 .vendor = vend, \ 1349 .device = dev, \ 1350 .subvendor = PCI_ANY_ID, \ 1351 .subdevice = PCI_ANY_ID, \ 1352 .class = PCI_CLASS_BRIDGE_CARDBUS << 8, \ 1353 .class_mask = ~0, \ 1354 .driver_data = CARDBUS_TYPE_##type, \ 1355 } 1356 1357 static const struct pci_device_id yenta_table[] = { 1358 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1031, TI), 1359 1360 /* 1361 * TBD: Check if these TI variants can use more 1362 * advanced overrides instead. (I can't get the 1363 * data sheets for these devices. --rmk) 1364 */ 1365 #ifdef CONFIG_YENTA_TI 1366 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1210, TI), 1367 1368 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1130, TI113X), 1369 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1131, TI113X), 1370 1371 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1211, TI12XX), 1372 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1220, TI12XX), 1373 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1221, TI12XX), 1374 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1225, TI12XX), 1375 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251A, TI12XX), 1376 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1251B, TI12XX), 1377 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1420, TI12XX), 1378 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1450, TI12XX), 1379 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1451A, TI12XX), 1380 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1510, TI12XX), 1381 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1520, TI12XX), 1382 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1620, TI12XX), 1383 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4410, TI12XX), 1384 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4450, TI12XX), 1385 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4451, TI12XX), 1386 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4510, TI12XX), 1387 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_4520, TI12XX), 1388 1389 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1250, TI1250), 1390 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_1410, TI1250), 1391 1392 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11, TI12XX), 1393 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X515, TI12XX), 1394 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX12, TI12XX), 1395 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X420, TI12XX), 1396 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_X620, TI12XX), 1397 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7410, TI12XX), 1398 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7510, TI12XX), 1399 CB_ID(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_7610, TI12XX), 1400 1401 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_710, ENE), 1402 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_712, ENE), 1403 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_720, ENE), 1404 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_722, ENE), 1405 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1211, ENE), 1406 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1225, ENE), 1407 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1410, ENE), 1408 CB_ID(PCI_VENDOR_ID_ENE, PCI_DEVICE_ID_ENE_1420, ENE), 1409 #endif /* CONFIG_YENTA_TI */ 1410 1411 #ifdef CONFIG_YENTA_RICOH 1412 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C465, RICOH), 1413 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C466, RICOH), 1414 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C475, RICOH), 1415 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, RICOH), 1416 CB_ID(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C478, RICOH), 1417 #endif 1418 1419 #ifdef CONFIG_YENTA_TOSHIBA 1420 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC95, TOPIC95), 1421 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC97, TOPIC97), 1422 CB_ID(PCI_VENDOR_ID_TOSHIBA, PCI_DEVICE_ID_TOSHIBA_TOPIC100, TOPIC97), 1423 #endif 1424 1425 #ifdef CONFIG_YENTA_O2 1426 CB_ID(PCI_VENDOR_ID_O2, PCI_ANY_ID, O2MICRO), 1427 #endif 1428 1429 /* match any cardbus bridge */ 1430 CB_ID(PCI_ANY_ID, PCI_ANY_ID, DEFAULT), 1431 { /* all zeroes */ } 1432 }; 1433 MODULE_DEVICE_TABLE(pci, yenta_table); 1434 1435 1436 static struct pci_driver yenta_cardbus_driver = { 1437 .name = "yenta_cardbus", 1438 .id_table = yenta_table, 1439 .probe = yenta_probe, 1440 .remove = yenta_close, 1441 .driver.pm = YENTA_PM_OPS, 1442 }; 1443 1444 module_pci_driver(yenta_cardbus_driver); 1445 1446 MODULE_LICENSE("GPL"); 1447