1 /* 2 * PCMCIA 16-bit resource management functions 3 * 4 * The initial developer of the original code is David A. Hinds 5 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 6 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 7 * 8 * Copyright (C) 1999 David A. Hinds 9 * Copyright (C) 2004-2010 Dominik Brodowski 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License version 2 as 13 * published by the Free Software Foundation. 14 * 15 */ 16 17 #include <linux/module.h> 18 #include <linux/kernel.h> 19 #include <linux/interrupt.h> 20 #include <linux/delay.h> 21 #include <linux/pci.h> 22 #include <linux/device.h> 23 #include <linux/netdevice.h> 24 #include <linux/slab.h> 25 26 #include <asm/irq.h> 27 28 #include <pcmcia/ss.h> 29 #include <pcmcia/cistpl.h> 30 #include <pcmcia/cisreg.h> 31 #include <pcmcia/ds.h> 32 33 #include "cs_internal.h" 34 35 36 /* Access speed for IO windows */ 37 static int io_speed; 38 module_param(io_speed, int, 0444); 39 40 41 int pcmcia_validate_mem(struct pcmcia_socket *s) 42 { 43 if (s->resource_ops->validate_mem) 44 return s->resource_ops->validate_mem(s); 45 /* if there is no callback, we can assume that everything is OK */ 46 return 0; 47 } 48 49 struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align, 50 int low, struct pcmcia_socket *s) 51 { 52 if (s->resource_ops->find_mem) 53 return s->resource_ops->find_mem(base, num, align, low, s); 54 return NULL; 55 } 56 57 58 /** 59 * release_io_space() - release IO ports allocated with alloc_io_space() 60 * @s: pcmcia socket 61 * @res: resource to release 62 * 63 */ 64 static void release_io_space(struct pcmcia_socket *s, struct resource *res) 65 { 66 resource_size_t num = resource_size(res); 67 int i; 68 69 dev_dbg(&s->dev, "release_io_space for %pR\n", res); 70 71 for (i = 0; i < MAX_IO_WIN; i++) { 72 if (!s->io[i].res) 73 continue; 74 if ((s->io[i].res->start <= res->start) && 75 (s->io[i].res->end >= res->end)) { 76 s->io[i].InUse -= num; 77 if (res->parent) 78 release_resource(res); 79 res->start = res->end = 0; 80 res->flags = IORESOURCE_IO; 81 /* Free the window if no one else is using it */ 82 if (s->io[i].InUse == 0) { 83 release_resource(s->io[i].res); 84 kfree(s->io[i].res); 85 s->io[i].res = NULL; 86 } 87 } 88 } 89 } 90 91 92 /** 93 * alloc_io_space() - allocate IO ports for use by a PCMCIA device 94 * @s: pcmcia socket 95 * @res: resource to allocate (begin: begin, end: size) 96 * @lines: number of IO lines decoded by the PCMCIA card 97 * 98 * Special stuff for managing IO windows, because they are scarce 99 */ 100 static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, 101 unsigned int lines) 102 { 103 unsigned int align; 104 unsigned int base = res->start; 105 unsigned int num = res->end; 106 int ret; 107 108 res->flags |= IORESOURCE_IO; 109 110 dev_dbg(&s->dev, "alloc_io_space request for %pR, %d lines\n", 111 res, lines); 112 113 align = base ? (lines ? 1<<lines : 0) : 1; 114 if (align && (align < num)) { 115 if (base) { 116 dev_dbg(&s->dev, "odd IO request\n"); 117 align = 0; 118 } else 119 while (align && (align < num)) 120 align <<= 1; 121 } 122 if (base & ~(align-1)) { 123 dev_dbg(&s->dev, "odd IO request\n"); 124 align = 0; 125 } 126 127 ret = s->resource_ops->find_io(s, res->flags, &base, num, align, 128 &res->parent); 129 if (ret) { 130 dev_dbg(&s->dev, "alloc_io_space request failed (%d)\n", ret); 131 return -EINVAL; 132 } 133 134 res->start = base; 135 res->end = res->start + num - 1; 136 137 if (res->parent) { 138 ret = request_resource(res->parent, res); 139 if (ret) { 140 dev_warn(&s->dev, 141 "request_resource %pR failed: %d\n", res, ret); 142 res->parent = NULL; 143 release_io_space(s, res); 144 } 145 } 146 dev_dbg(&s->dev, "alloc_io_space request result %d: %pR\n", ret, res); 147 return ret; 148 } 149 150 151 /** 152 * pcmcia_access_config() - read or write card configuration registers 153 * 154 * pcmcia_access_config() reads and writes configuration registers in 155 * attribute memory. Memory window 0 is reserved for this and the tuple 156 * reading services. Drivers must use pcmcia_read_config_byte() or 157 * pcmcia_write_config_byte(). 158 */ 159 static int pcmcia_access_config(struct pcmcia_device *p_dev, 160 off_t where, u8 *val, 161 int (*accessf) (struct pcmcia_socket *s, 162 int attr, unsigned int addr, 163 unsigned int len, void *ptr)) 164 { 165 struct pcmcia_socket *s; 166 config_t *c; 167 int addr; 168 int ret = 0; 169 170 s = p_dev->socket; 171 172 mutex_lock(&s->ops_mutex); 173 c = p_dev->function_config; 174 175 if (!(c->state & CONFIG_LOCKED)) { 176 dev_dbg(&p_dev->dev, "Configuration isn't locked\n"); 177 mutex_unlock(&s->ops_mutex); 178 return -EACCES; 179 } 180 181 addr = (p_dev->config_base + where) >> 1; 182 183 ret = accessf(s, 1, addr, 1, val); 184 185 mutex_unlock(&s->ops_mutex); 186 187 return ret; 188 } 189 190 191 /** 192 * pcmcia_read_config_byte() - read a byte from a card configuration register 193 * 194 * pcmcia_read_config_byte() reads a byte from a configuration register in 195 * attribute memory. 196 */ 197 int pcmcia_read_config_byte(struct pcmcia_device *p_dev, off_t where, u8 *val) 198 { 199 return pcmcia_access_config(p_dev, where, val, pcmcia_read_cis_mem); 200 } 201 EXPORT_SYMBOL(pcmcia_read_config_byte); 202 203 204 /** 205 * pcmcia_write_config_byte() - write a byte to a card configuration register 206 * 207 * pcmcia_write_config_byte() writes a byte to a configuration register in 208 * attribute memory. 209 */ 210 int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val) 211 { 212 return pcmcia_access_config(p_dev, where, &val, pcmcia_write_cis_mem); 213 } 214 EXPORT_SYMBOL(pcmcia_write_config_byte); 215 216 217 /** 218 * pcmcia_map_mem_page() - modify iomem window to point to a different offset 219 * @p_dev: pcmcia device 220 * @res: iomem resource already enabled by pcmcia_request_window() 221 * @offset: card_offset to map 222 * 223 * pcmcia_map_mem_page() modifies what can be read and written by accessing 224 * an iomem range previously enabled by pcmcia_request_window(), by setting 225 * the card_offset value to @offset. 226 */ 227 int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, 228 unsigned int offset) 229 { 230 struct pcmcia_socket *s = p_dev->socket; 231 unsigned int w; 232 int ret; 233 234 w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1; 235 if (w >= MAX_WIN) 236 return -EINVAL; 237 238 mutex_lock(&s->ops_mutex); 239 s->win[w].card_start = offset; 240 ret = s->ops->set_mem_map(s, &s->win[w]); 241 if (ret) 242 dev_warn(&p_dev->dev, "failed to set_mem_map\n"); 243 mutex_unlock(&s->ops_mutex); 244 return ret; 245 } 246 EXPORT_SYMBOL(pcmcia_map_mem_page); 247 248 249 /** 250 * pcmcia_fixup_iowidth() - reduce io width to 8bit 251 * @p_dev: pcmcia device 252 * 253 * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the 254 * IO width to 8bit after having called pcmcia_enable_device() 255 * previously. 256 */ 257 int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) 258 { 259 struct pcmcia_socket *s = p_dev->socket; 260 pccard_io_map io_off = { 0, 0, 0, 0, 1 }; 261 pccard_io_map io_on; 262 int i, ret = 0; 263 264 mutex_lock(&s->ops_mutex); 265 266 dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n"); 267 268 if (!(s->state & SOCKET_PRESENT) || 269 !(p_dev->function_config->state & CONFIG_LOCKED)) { 270 dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); 271 ret = -EACCES; 272 goto unlock; 273 } 274 275 io_on.speed = io_speed; 276 for (i = 0; i < MAX_IO_WIN; i++) { 277 if (!s->io[i].res) 278 continue; 279 io_off.map = i; 280 io_on.map = i; 281 282 io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; 283 io_on.start = s->io[i].res->start; 284 io_on.stop = s->io[i].res->end; 285 286 s->ops->set_io_map(s, &io_off); 287 msleep(40); 288 s->ops->set_io_map(s, &io_on); 289 } 290 unlock: 291 mutex_unlock(&s->ops_mutex); 292 293 return ret; 294 } 295 EXPORT_SYMBOL(pcmcia_fixup_iowidth); 296 297 298 /** 299 * pcmcia_fixup_vpp() - set Vpp to a new voltage level 300 * @p_dev: pcmcia device 301 * @new_vpp: new Vpp voltage 302 * 303 * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to 304 * a new voltage level between calls to pcmcia_enable_device() 305 * and pcmcia_disable_device(). 306 */ 307 int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) 308 { 309 struct pcmcia_socket *s = p_dev->socket; 310 int ret = 0; 311 312 mutex_lock(&s->ops_mutex); 313 314 dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp); 315 316 if (!(s->state & SOCKET_PRESENT) || 317 !(p_dev->function_config->state & CONFIG_LOCKED)) { 318 dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); 319 ret = -EACCES; 320 goto unlock; 321 } 322 323 s->socket.Vpp = new_vpp; 324 if (s->ops->set_socket(s, &s->socket)) { 325 dev_warn(&p_dev->dev, "Unable to set VPP\n"); 326 ret = -EIO; 327 goto unlock; 328 } 329 p_dev->vpp = new_vpp; 330 331 unlock: 332 mutex_unlock(&s->ops_mutex); 333 334 return ret; 335 } 336 EXPORT_SYMBOL(pcmcia_fixup_vpp); 337 338 339 /** 340 * pcmcia_release_configuration() - physically disable a PCMCIA device 341 * @p_dev: pcmcia device 342 * 343 * pcmcia_release_configuration() is the 1:1 counterpart to 344 * pcmcia_enable_device(): If a PCMCIA device is no longer used by any 345 * driver, the Vpp voltage is set to 0, IRQs will no longer be generated, 346 * and I/O ranges will be disabled. As pcmcia_release_io() and 347 * pcmcia_release_window() still need to be called, device drivers are 348 * expected to call pcmcia_disable_device() instead. 349 */ 350 int pcmcia_release_configuration(struct pcmcia_device *p_dev) 351 { 352 pccard_io_map io = { 0, 0, 0, 0, 1 }; 353 struct pcmcia_socket *s = p_dev->socket; 354 config_t *c; 355 int i; 356 357 mutex_lock(&s->ops_mutex); 358 c = p_dev->function_config; 359 if (p_dev->_locked) { 360 p_dev->_locked = 0; 361 if (--(s->lock_count) == 0) { 362 s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ 363 s->socket.Vpp = 0; 364 s->socket.io_irq = 0; 365 s->ops->set_socket(s, &s->socket); 366 } 367 } 368 if (c->state & CONFIG_LOCKED) { 369 c->state &= ~CONFIG_LOCKED; 370 if (c->state & CONFIG_IO_REQ) 371 for (i = 0; i < MAX_IO_WIN; i++) { 372 if (!s->io[i].res) 373 continue; 374 s->io[i].Config--; 375 if (s->io[i].Config != 0) 376 continue; 377 io.map = i; 378 s->ops->set_io_map(s, &io); 379 } 380 } 381 mutex_unlock(&s->ops_mutex); 382 383 return 0; 384 } 385 386 387 /** 388 * pcmcia_release_io() - release I/O allocated by a PCMCIA device 389 * @p_dev: pcmcia device 390 * 391 * pcmcia_release_io() releases the I/O ranges allocated by a PCMCIA 392 * device. This may be invoked some time after a card ejection has 393 * already dumped the actual socket configuration, so if the client is 394 * "stale", we don't bother checking the port ranges against the 395 * current socket values. 396 */ 397 static int pcmcia_release_io(struct pcmcia_device *p_dev) 398 { 399 struct pcmcia_socket *s = p_dev->socket; 400 int ret = -EINVAL; 401 config_t *c; 402 403 mutex_lock(&s->ops_mutex); 404 if (!p_dev->_io) 405 goto out; 406 407 c = p_dev->function_config; 408 409 release_io_space(s, &c->io[0]); 410 411 if (c->io[1].end) 412 release_io_space(s, &c->io[1]); 413 414 p_dev->_io = 0; 415 c->state &= ~CONFIG_IO_REQ; 416 417 out: 418 mutex_unlock(&s->ops_mutex); 419 420 return ret; 421 } /* pcmcia_release_io */ 422 423 424 /** 425 * pcmcia_release_window() - release reserved iomem for PCMCIA devices 426 * @p_dev: pcmcia device 427 * @res: iomem resource to release 428 * 429 * pcmcia_release_window() releases &struct resource *res which was 430 * previously reserved by calling pcmcia_request_window(). 431 */ 432 int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) 433 { 434 struct pcmcia_socket *s = p_dev->socket; 435 pccard_mem_map *win; 436 unsigned int w; 437 438 dev_dbg(&p_dev->dev, "releasing window %pR\n", res); 439 440 w = ((res->flags & IORESOURCE_BITS & WIN_FLAGS_REQ) >> 2) - 1; 441 if (w >= MAX_WIN) 442 return -EINVAL; 443 444 mutex_lock(&s->ops_mutex); 445 win = &s->win[w]; 446 447 if (!(p_dev->_win & CLIENT_WIN_REQ(w))) { 448 dev_dbg(&p_dev->dev, "not releasing unknown window\n"); 449 mutex_unlock(&s->ops_mutex); 450 return -EINVAL; 451 } 452 453 /* Shut down memory window */ 454 win->flags &= ~MAP_ACTIVE; 455 s->ops->set_mem_map(s, win); 456 s->state &= ~SOCKET_WIN_REQ(w); 457 458 /* Release system memory */ 459 if (win->res) { 460 release_resource(res); 461 release_resource(win->res); 462 kfree(win->res); 463 win->res = NULL; 464 } 465 res->start = res->end = 0; 466 res->flags = IORESOURCE_MEM; 467 p_dev->_win &= ~CLIENT_WIN_REQ(w); 468 mutex_unlock(&s->ops_mutex); 469 470 return 0; 471 } /* pcmcia_release_window */ 472 EXPORT_SYMBOL(pcmcia_release_window); 473 474 475 /** 476 * pcmcia_enable_device() - set up and activate a PCMCIA device 477 * @p_dev: the associated PCMCIA device 478 * 479 * pcmcia_enable_device() physically enables a PCMCIA device. It parses 480 * the flags passed to in @flags and stored in @p_dev->flags and sets up 481 * the Vpp voltage, enables the speaker line, I/O ports and store proper 482 * values to configuration registers. 483 */ 484 int pcmcia_enable_device(struct pcmcia_device *p_dev) 485 { 486 int i; 487 unsigned int base; 488 struct pcmcia_socket *s = p_dev->socket; 489 config_t *c; 490 pccard_io_map iomap; 491 unsigned char status = 0; 492 unsigned char ext_status = 0; 493 unsigned char option = 0; 494 unsigned int flags = p_dev->config_flags; 495 496 if (!(s->state & SOCKET_PRESENT)) 497 return -ENODEV; 498 499 mutex_lock(&s->ops_mutex); 500 c = p_dev->function_config; 501 if (c->state & CONFIG_LOCKED) { 502 mutex_unlock(&s->ops_mutex); 503 dev_dbg(&p_dev->dev, "Configuration is locked\n"); 504 return -EACCES; 505 } 506 507 /* Do power control. We don't allow changes in Vcc. */ 508 s->socket.Vpp = p_dev->vpp; 509 if (s->ops->set_socket(s, &s->socket)) { 510 mutex_unlock(&s->ops_mutex); 511 dev_warn(&p_dev->dev, "Unable to set socket state\n"); 512 return -EINVAL; 513 } 514 515 /* Pick memory or I/O card, DMA mode, interrupt */ 516 if (p_dev->_io || flags & CONF_ENABLE_IRQ) 517 flags |= CONF_ENABLE_IOCARD; 518 if (flags & CONF_ENABLE_IOCARD) 519 s->socket.flags |= SS_IOCARD; 520 if (flags & CONF_ENABLE_ZVCARD) 521 s->socket.flags |= SS_ZVCARD | SS_IOCARD; 522 if (flags & CONF_ENABLE_SPKR) { 523 s->socket.flags |= SS_SPKR_ENA; 524 status = CCSR_AUDIO_ENA; 525 if (!(p_dev->config_regs & PRESENT_STATUS)) 526 dev_warn(&p_dev->dev, "speaker requested, but " 527 "PRESENT_STATUS not set!\n"); 528 } 529 if (flags & CONF_ENABLE_IRQ) 530 s->socket.io_irq = s->pcmcia_irq; 531 else 532 s->socket.io_irq = 0; 533 if (flags & CONF_ENABLE_ESR) { 534 p_dev->config_regs |= PRESENT_EXT_STATUS; 535 ext_status = ESR_REQ_ATTN_ENA; 536 } 537 s->ops->set_socket(s, &s->socket); 538 s->lock_count++; 539 540 dev_dbg(&p_dev->dev, 541 "enable_device: V %d, flags %x, base %x, regs %x, idx %x\n", 542 p_dev->vpp, flags, p_dev->config_base, p_dev->config_regs, 543 p_dev->config_index); 544 545 /* Set up CIS configuration registers */ 546 base = p_dev->config_base; 547 if (p_dev->config_regs & PRESENT_COPY) { 548 u16 tmp = 0; 549 dev_dbg(&p_dev->dev, "clearing CISREG_SCR\n"); 550 pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &tmp); 551 } 552 if (p_dev->config_regs & PRESENT_PIN_REPLACE) { 553 u16 tmp = 0; 554 dev_dbg(&p_dev->dev, "clearing CISREG_PRR\n"); 555 pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &tmp); 556 } 557 if (p_dev->config_regs & PRESENT_OPTION) { 558 if (s->functions == 1) { 559 option = p_dev->config_index & COR_CONFIG_MASK; 560 } else { 561 option = p_dev->config_index & COR_MFC_CONFIG_MASK; 562 option |= COR_FUNC_ENA|COR_IREQ_ENA; 563 if (p_dev->config_regs & PRESENT_IOBASE_0) 564 option |= COR_ADDR_DECODE; 565 } 566 if ((flags & CONF_ENABLE_IRQ) && 567 !(flags & CONF_ENABLE_PULSE_IRQ)) 568 option |= COR_LEVEL_REQ; 569 pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); 570 msleep(40); 571 } 572 if (p_dev->config_regs & PRESENT_STATUS) 573 pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status); 574 575 if (p_dev->config_regs & PRESENT_EXT_STATUS) 576 pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, 577 &ext_status); 578 579 if (p_dev->config_regs & PRESENT_IOBASE_0) { 580 u8 b = c->io[0].start & 0xff; 581 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); 582 b = (c->io[0].start >> 8) & 0xff; 583 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); 584 } 585 if (p_dev->config_regs & PRESENT_IOSIZE) { 586 u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1; 587 pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); 588 } 589 590 /* Configure I/O windows */ 591 if (c->state & CONFIG_IO_REQ) { 592 iomap.speed = io_speed; 593 for (i = 0; i < MAX_IO_WIN; i++) 594 if (s->io[i].res) { 595 iomap.map = i; 596 iomap.flags = MAP_ACTIVE; 597 switch (s->io[i].res->flags & IO_DATA_PATH_WIDTH) { 598 case IO_DATA_PATH_WIDTH_16: 599 iomap.flags |= MAP_16BIT; break; 600 case IO_DATA_PATH_WIDTH_AUTO: 601 iomap.flags |= MAP_AUTOSZ; break; 602 default: 603 break; 604 } 605 iomap.start = s->io[i].res->start; 606 iomap.stop = s->io[i].res->end; 607 s->ops->set_io_map(s, &iomap); 608 s->io[i].Config++; 609 } 610 } 611 612 c->state |= CONFIG_LOCKED; 613 p_dev->_locked = 1; 614 mutex_unlock(&s->ops_mutex); 615 return 0; 616 } /* pcmcia_enable_device */ 617 EXPORT_SYMBOL(pcmcia_enable_device); 618 619 620 /** 621 * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices 622 * @p_dev: the associated PCMCIA device 623 * 624 * pcmcia_request_io() attempts to reserve the IO port ranges specified in 625 * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The 626 * "start" value is the requested start of the IO port resource; "end" 627 * reflects the number of ports requested. The number of IO lines requested 628 * is specified in &struct pcmcia_device @p_dev->io_lines. 629 */ 630 int pcmcia_request_io(struct pcmcia_device *p_dev) 631 { 632 struct pcmcia_socket *s = p_dev->socket; 633 config_t *c = p_dev->function_config; 634 int ret = -EINVAL; 635 636 mutex_lock(&s->ops_mutex); 637 dev_dbg(&p_dev->dev, "pcmcia_request_io: %pR , %pR", 638 &c->io[0], &c->io[1]); 639 640 if (!(s->state & SOCKET_PRESENT)) { 641 dev_dbg(&p_dev->dev, "pcmcia_request_io: No card present\n"); 642 goto out; 643 } 644 645 if (c->state & CONFIG_LOCKED) { 646 dev_dbg(&p_dev->dev, "Configuration is locked\n"); 647 goto out; 648 } 649 if (c->state & CONFIG_IO_REQ) { 650 dev_dbg(&p_dev->dev, "IO already configured\n"); 651 goto out; 652 } 653 654 ret = alloc_io_space(s, &c->io[0], p_dev->io_lines); 655 if (ret) 656 goto out; 657 658 if (c->io[1].end) { 659 ret = alloc_io_space(s, &c->io[1], p_dev->io_lines); 660 if (ret) { 661 struct resource tmp = c->io[0]; 662 /* release the previously allocated resource */ 663 release_io_space(s, &c->io[0]); 664 /* but preserve the settings, for they worked... */ 665 c->io[0].end = resource_size(&tmp); 666 c->io[0].start = tmp.start; 667 c->io[0].flags = tmp.flags; 668 goto out; 669 } 670 } else 671 c->io[1].start = 0; 672 673 c->state |= CONFIG_IO_REQ; 674 p_dev->_io = 1; 675 676 dev_dbg(&p_dev->dev, "pcmcia_request_io succeeded: %pR , %pR", 677 &c->io[0], &c->io[1]); 678 out: 679 mutex_unlock(&s->ops_mutex); 680 681 return ret; 682 } /* pcmcia_request_io */ 683 EXPORT_SYMBOL(pcmcia_request_io); 684 685 686 /** 687 * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device 688 * @p_dev: the associated PCMCIA device 689 * @handler: IRQ handler to register 690 * 691 * pcmcia_request_irq() is a wrapper around request_irq() which allows 692 * the PCMCIA core to clean up the registration in pcmcia_disable_device(). 693 * Drivers are free to use request_irq() directly, but then they need to 694 * call free_irq() themselfves, too. Also, only %IRQF_SHARED capable IRQ 695 * handlers are allowed. 696 */ 697 int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, 698 irq_handler_t handler) 699 { 700 int ret; 701 702 if (!p_dev->irq) 703 return -EINVAL; 704 705 ret = request_irq(p_dev->irq, handler, IRQF_SHARED, 706 p_dev->devname, p_dev->priv); 707 if (!ret) 708 p_dev->_irq = 1; 709 710 return ret; 711 } 712 EXPORT_SYMBOL(pcmcia_request_irq); 713 714 715 #ifdef CONFIG_PCMCIA_PROBE 716 717 /* mask of IRQs already reserved by other cards, we should avoid using them */ 718 static u8 pcmcia_used_irq[32]; 719 720 static irqreturn_t test_action(int cpl, void *dev_id) 721 { 722 return IRQ_NONE; 723 } 724 725 /** 726 * pcmcia_setup_isa_irq() - determine whether an ISA IRQ can be used 727 * @p_dev - the associated PCMCIA device 728 * 729 * locking note: must be called with ops_mutex locked. 730 */ 731 static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type) 732 { 733 struct pcmcia_socket *s = p_dev->socket; 734 unsigned int try, irq; 735 u32 mask = s->irq_mask; 736 int ret = -ENODEV; 737 738 for (try = 0; try < 64; try++) { 739 irq = try % 32; 740 741 if (irq > NR_IRQS) 742 continue; 743 744 /* marked as available by driver, not blocked by userspace? */ 745 if (!((mask >> irq) & 1)) 746 continue; 747 748 /* avoid an IRQ which is already used by another PCMCIA card */ 749 if ((try < 32) && pcmcia_used_irq[irq]) 750 continue; 751 752 /* register the correct driver, if possible, to check whether 753 * registering a dummy handle works, i.e. if the IRQ isn't 754 * marked as used by the kernel resource management core */ 755 ret = request_irq(irq, test_action, type, p_dev->devname, 756 p_dev); 757 if (!ret) { 758 free_irq(irq, p_dev); 759 p_dev->irq = s->pcmcia_irq = irq; 760 pcmcia_used_irq[irq]++; 761 break; 762 } 763 } 764 765 return ret; 766 } 767 768 void pcmcia_cleanup_irq(struct pcmcia_socket *s) 769 { 770 pcmcia_used_irq[s->pcmcia_irq]--; 771 s->pcmcia_irq = 0; 772 } 773 774 #else /* CONFIG_PCMCIA_PROBE */ 775 776 static int pcmcia_setup_isa_irq(struct pcmcia_device *p_dev, int type) 777 { 778 return -EINVAL; 779 } 780 781 void pcmcia_cleanup_irq(struct pcmcia_socket *s) 782 { 783 s->pcmcia_irq = 0; 784 return; 785 } 786 787 #endif /* CONFIG_PCMCIA_PROBE */ 788 789 790 /** 791 * pcmcia_setup_irq() - determine IRQ to be used for device 792 * @p_dev - the associated PCMCIA device 793 * 794 * locking note: must be called with ops_mutex locked. 795 */ 796 int pcmcia_setup_irq(struct pcmcia_device *p_dev) 797 { 798 struct pcmcia_socket *s = p_dev->socket; 799 800 if (p_dev->irq) 801 return 0; 802 803 /* already assigned? */ 804 if (s->pcmcia_irq) { 805 p_dev->irq = s->pcmcia_irq; 806 return 0; 807 } 808 809 /* prefer an exclusive ISA irq */ 810 if (!pcmcia_setup_isa_irq(p_dev, 0)) 811 return 0; 812 813 /* but accept a shared ISA irq */ 814 if (!pcmcia_setup_isa_irq(p_dev, IRQF_SHARED)) 815 return 0; 816 817 /* but use the PCI irq otherwise */ 818 if (s->pci_irq) { 819 p_dev->irq = s->pcmcia_irq = s->pci_irq; 820 return 0; 821 } 822 823 return -EINVAL; 824 } 825 826 827 /** 828 * pcmcia_request_window() - attempt to reserve iomem for PCMCIA devices 829 * @p_dev: the associated PCMCIA device 830 * @res: &struct resource pointing to p_dev->resource[2..5] 831 * @speed: access speed 832 * 833 * pcmcia_request_window() attepts to reserve an iomem ranges specified in 834 * &struct resource @res pointing to one of the entries in 835 * &struct pcmcia_device @p_dev->resource[2..5]. The "start" value is the 836 * requested start of the IO mem resource; "end" reflects the size 837 * requested. 838 */ 839 int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, 840 unsigned int speed) 841 { 842 struct pcmcia_socket *s = p_dev->socket; 843 pccard_mem_map *win; 844 u_long align; 845 int w; 846 847 dev_dbg(&p_dev->dev, "request_window %pR %d\n", res, speed); 848 849 if (!(s->state & SOCKET_PRESENT)) { 850 dev_dbg(&p_dev->dev, "No card present\n"); 851 return -ENODEV; 852 } 853 854 /* Window size defaults to smallest available */ 855 if (res->end == 0) 856 res->end = s->map_size; 857 align = (s->features & SS_CAP_MEM_ALIGN) ? res->end : s->map_size; 858 if (res->end & (s->map_size-1)) { 859 dev_dbg(&p_dev->dev, "invalid map size\n"); 860 return -EINVAL; 861 } 862 if ((res->start && (s->features & SS_CAP_STATIC_MAP)) || 863 (res->start & (align-1))) { 864 dev_dbg(&p_dev->dev, "invalid base address\n"); 865 return -EINVAL; 866 } 867 if (res->start) 868 align = 0; 869 870 /* Allocate system memory window */ 871 mutex_lock(&s->ops_mutex); 872 for (w = 0; w < MAX_WIN; w++) 873 if (!(s->state & SOCKET_WIN_REQ(w))) 874 break; 875 if (w == MAX_WIN) { 876 dev_dbg(&p_dev->dev, "all windows are used already\n"); 877 mutex_unlock(&s->ops_mutex); 878 return -EINVAL; 879 } 880 881 win = &s->win[w]; 882 883 if (!(s->features & SS_CAP_STATIC_MAP)) { 884 win->res = pcmcia_find_mem_region(res->start, res->end, align, 885 0, s); 886 if (!win->res) { 887 dev_dbg(&p_dev->dev, "allocating mem region failed\n"); 888 mutex_unlock(&s->ops_mutex); 889 return -EINVAL; 890 } 891 } 892 p_dev->_win |= CLIENT_WIN_REQ(w); 893 894 /* Configure the socket controller */ 895 win->map = w+1; 896 win->flags = res->flags & WIN_FLAGS_MAP; 897 win->speed = speed; 898 win->card_start = 0; 899 900 if (s->ops->set_mem_map(s, win) != 0) { 901 dev_dbg(&p_dev->dev, "failed to set memory mapping\n"); 902 mutex_unlock(&s->ops_mutex); 903 return -EIO; 904 } 905 s->state |= SOCKET_WIN_REQ(w); 906 907 /* Return window handle */ 908 if (s->features & SS_CAP_STATIC_MAP) 909 res->start = win->static_start; 910 else 911 res->start = win->res->start; 912 913 /* convert to new-style resources */ 914 res->end += res->start - 1; 915 res->flags &= ~WIN_FLAGS_REQ; 916 res->flags |= (win->map << 2) | IORESOURCE_MEM; 917 res->parent = win->res; 918 if (win->res) 919 request_resource(&iomem_resource, res); 920 921 dev_dbg(&p_dev->dev, "request_window results in %pR\n", res); 922 923 mutex_unlock(&s->ops_mutex); 924 925 return 0; 926 } /* pcmcia_request_window */ 927 EXPORT_SYMBOL(pcmcia_request_window); 928 929 930 /** 931 * pcmcia_disable_device() - disable and clean up a PCMCIA device 932 * @p_dev: the associated PCMCIA device 933 * 934 * pcmcia_disable_device() is the driver-callable counterpart to 935 * pcmcia_enable_device(): If a PCMCIA device is no longer used, 936 * drivers are expected to clean up and disable the device by calling 937 * this function. Any I/O ranges (iomem and ioports) will be released, 938 * the Vpp voltage will be set to 0, and IRQs will no longer be 939 * generated -- at least if there is no other card function (of 940 * multifunction devices) being used. 941 */ 942 void pcmcia_disable_device(struct pcmcia_device *p_dev) 943 { 944 int i; 945 946 dev_dbg(&p_dev->dev, "disabling device\n"); 947 948 for (i = 0; i < MAX_WIN; i++) { 949 struct resource *res = p_dev->resource[MAX_IO_WIN + i]; 950 if (res->flags & WIN_FLAGS_REQ) 951 pcmcia_release_window(p_dev, res); 952 } 953 954 pcmcia_release_configuration(p_dev); 955 pcmcia_release_io(p_dev); 956 if (p_dev->_irq) { 957 free_irq(p_dev->irq, p_dev->priv); 958 p_dev->_irq = 0; 959 } 960 } 961 EXPORT_SYMBOL(pcmcia_disable_device); 962