1 /* 2 * o2micro.h 1.13 1999/10/25 20:03:34 3 * 4 * The contents of this file are subject to the Mozilla Public License 5 * Version 1.1 (the "License"); you may not use this file except in 6 * compliance with the License. You may obtain a copy of the License 7 * at http://www.mozilla.org/MPL/ 8 * 9 * Software distributed under the License is distributed on an "AS IS" 10 * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See 11 * the License for the specific language governing rights and 12 * limitations under the License. 13 * 14 * The initial developer of the original code is David A. Hinds 15 * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds 16 * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. 17 * 18 * Alternatively, the contents of this file may be used under the 19 * terms of the GNU General Public License version 2 (the "GPL"), in which 20 * case the provisions of the GPL are applicable instead of the 21 * above. If you wish to allow the use of your version of this file 22 * only under the terms of the GPL and not to allow others to use 23 * your version of this file under the MPL, indicate your decision by 24 * deleting the provisions above and replace them with the notice and 25 * other provisions required by the GPL. If you do not delete the 26 * provisions above, a recipient may use your version of this file 27 * under either the MPL or the GPL. 28 */ 29 30 #ifndef _LINUX_O2MICRO_H 31 #define _LINUX_O2MICRO_H 32 33 #ifndef PCI_VENDOR_ID_O2 34 #define PCI_VENDOR_ID_O2 0x1217 35 #endif 36 #ifndef PCI_DEVICE_ID_O2_6729 37 #define PCI_DEVICE_ID_O2_6729 0x6729 38 #endif 39 #ifndef PCI_DEVICE_ID_O2_6730 40 #define PCI_DEVICE_ID_O2_6730 0x673a 41 #endif 42 #ifndef PCI_DEVICE_ID_O2_6832 43 #define PCI_DEVICE_ID_O2_6832 0x6832 44 #endif 45 #ifndef PCI_DEVICE_ID_O2_6836 46 #define PCI_DEVICE_ID_O2_6836 0x6836 47 #endif 48 #ifndef PCI_DEVICE_ID_O2_6812 49 #define PCI_DEVICE_ID_O2_6812 0x6872 50 #endif 51 #ifndef PCI_DEVICE_ID_O2_6933 52 #define PCI_DEVICE_ID_O2_6933 0x6933 53 #endif 54 55 /* Additional PCI configuration registers */ 56 57 #define O2_MUX_CONTROL 0x90 /* 32 bit */ 58 #define O2_MUX_RING_OUT 0x0000000f 59 #define O2_MUX_SKTB_ACTV 0x000000f0 60 #define O2_MUX_SCTA_ACTV_ENA 0x00000100 61 #define O2_MUX_SCTB_ACTV_ENA 0x00000200 62 #define O2_MUX_SER_IRQ_ROUTE 0x0000e000 63 #define O2_MUX_SER_PCI 0x00010000 64 65 #define O2_MUX_SKTA_TURBO 0x000c0000 /* for 6833, 6860 */ 66 #define O2_MUX_SKTB_TURBO 0x00300000 67 #define O2_MUX_AUX_VCC_3V 0x00400000 68 #define O2_MUX_PCI_VCC_5V 0x00800000 69 #define O2_MUX_PME_MUX 0x0f000000 70 71 /* Additional ExCA registers */ 72 73 #define O2_MODE_A 0x38 74 #define O2_MODE_A_2 0x26 /* for 6833B, 6860C */ 75 #define O2_MODE_A_CD_PULSE 0x04 76 #define O2_MODE_A_SUSP_EDGE 0x08 77 #define O2_MODE_A_HOST_SUSP 0x10 78 #define O2_MODE_A_PWR_MASK 0x60 79 #define O2_MODE_A_QUIET 0x80 80 81 #define O2_MODE_B 0x39 82 #define O2_MODE_B_2 0x2e /* for 6833B, 6860C */ 83 #define O2_MODE_B_IDENT 0x03 84 #define O2_MODE_B_ID_BSTEP 0x00 85 #define O2_MODE_B_ID_CSTEP 0x01 86 #define O2_MODE_B_ID_O2 0x02 87 #define O2_MODE_B_VS1 0x04 88 #define O2_MODE_B_VS2 0x08 89 #define O2_MODE_B_IRQ15_RI 0x80 90 91 #define O2_MODE_C 0x3a 92 #define O2_MODE_C_DREQ_MASK 0x03 93 #define O2_MODE_C_DREQ_INPACK 0x01 94 #define O2_MODE_C_DREQ_WP 0x02 95 #define O2_MODE_C_DREQ_BVD2 0x03 96 #define O2_MODE_C_ZVIDEO 0x08 97 #define O2_MODE_C_IREQ_SEL 0x30 98 #define O2_MODE_C_MGMT_SEL 0xc0 99 100 #define O2_MODE_D 0x3b 101 #define O2_MODE_D_IRQ_MODE 0x03 102 #define O2_MODE_D_PCI_CLKRUN 0x04 103 #define O2_MODE_D_CB_CLKRUN 0x08 104 #define O2_MODE_D_SKT_ACTV 0x20 105 #define O2_MODE_D_PCI_FIFO 0x40 /* for OZ6729, OZ6730 */ 106 #define O2_MODE_D_W97_IRQ 0x40 107 #define O2_MODE_D_ISA_IRQ 0x80 108 109 #define O2_MHPG_DMA 0x3c 110 #define O2_MHPG_CHANNEL 0x07 111 #define O2_MHPG_CINT_ENA 0x08 112 #define O2_MHPG_CSC_ENA 0x10 113 114 #define O2_FIFO_ENA 0x3d 115 #define O2_FIFO_ZVIDEO_3 0x08 116 #define O2_FIFO_PCI_FIFO 0x10 117 #define O2_FIFO_POSTWR 0x40 118 #define O2_FIFO_BUFFER 0x80 119 120 #define O2_MODE_E 0x3e 121 #define O2_MODE_E_MHPG_DMA 0x01 122 #define O2_MODE_E_SPKR_OUT 0x02 123 #define O2_MODE_E_LED_OUT 0x08 124 #define O2_MODE_E_SKTA_ACTV 0x10 125 126 #define O2_RESERVED1 0x94 127 #define O2_RESERVED2 0xD4 128 #define O2_RES_READ_PREFETCH 0x02 129 #define O2_RES_WRITE_BURST 0x08 130 131 static int o2micro_override(struct yenta_socket *socket) 132 { 133 /* 134 * 'reserved' register at 0x94/D4. allows setting read prefetch and write 135 * bursting. read prefetching for example makes the RME Hammerfall DSP 136 * working. for some bridges it is at 0x94, for others at 0xD4. it's 137 * ok to write to both registers on all O2 bridges. 138 * from Eric Still, 02Micro. 139 */ 140 u8 a, b; 141 142 if (PCI_FUNC(socket->dev->devfn) == 0) { 143 a = config_readb(socket, O2_RESERVED1); 144 b = config_readb(socket, O2_RESERVED2); 145 146 dev_printk(KERN_INFO, &socket->dev->dev, 147 "O2: res at 0x94/0xD4: %02x/%02x\n", a, b); 148 149 switch (socket->dev->device) { 150 /* 151 * older bridges have problems with both read prefetch and write 152 * bursting depending on the combination of the chipset, bridge 153 * and the cardbus card. so disable them to be on the safe side. 154 */ 155 case PCI_DEVICE_ID_O2_6729: 156 case PCI_DEVICE_ID_O2_6730: 157 case PCI_DEVICE_ID_O2_6812: 158 case PCI_DEVICE_ID_O2_6832: 159 case PCI_DEVICE_ID_O2_6836: 160 case PCI_DEVICE_ID_O2_6933: 161 dev_printk(KERN_INFO, &socket->dev->dev, 162 "Yenta O2: old bridge, disabling read " 163 "prefetch/write burst\n"); 164 config_writeb(socket, O2_RESERVED1, 165 a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); 166 config_writeb(socket, O2_RESERVED2, 167 b & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); 168 break; 169 170 default: 171 dev_printk(KERN_INFO , &socket->dev->dev, 172 "O2: enabling read prefetch/write burst\n"); 173 config_writeb(socket, O2_RESERVED1, 174 a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); 175 config_writeb(socket, O2_RESERVED2, 176 b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); 177 } 178 } 179 180 return 0; 181 } 182 183 static void o2micro_restore_state(struct yenta_socket *socket) 184 { 185 /* 186 * as long as read prefetch is the only thing in 187 * o2micro_override, it's safe to call it from here 188 */ 189 o2micro_override(socket); 190 } 191 192 #endif /* _LINUX_O2MICRO_H */ 193