1# 2# PCCARD (PCMCIA/CardBus) bus subsystem configuration 3# 4 5menuconfig PCCARD 6 tristate "PCCard (PCMCIA/CardBus) support" 7 ---help--- 8 Say Y here if you want to attach PCMCIA- or PC-cards to your Linux 9 computer. These are credit-card size devices such as network cards, 10 modems or hard drives often used with laptops computers. There are 11 actually two varieties of these cards: 16 bit PCMCIA and 32 bit 12 CardBus cards. 13 14 To compile this driver as modules, choose M here: the 15 module will be called pcmcia_core. 16 17if PCCARD 18 19config PCMCIA 20 tristate "16-bit PCMCIA support" 21 select CRC32 22 default y 23 ---help--- 24 This option enables support for 16-bit PCMCIA cards. Most older 25 PC-cards are such 16-bit PCMCIA cards, so unless you know you're 26 only using 32-bit CardBus cards, say Y or M here. 27 28 To use 16-bit PCMCIA cards, you will need supporting software in 29 most cases. (see the file <file:Documentation/Changes> for 30 location and details). 31 32 To compile this driver as modules, choose M here: the 33 module will be called pcmcia. 34 35 If unsure, say Y. 36 37config PCMCIA_LOAD_CIS 38 bool "Load CIS updates from userspace" 39 depends on PCMCIA 40 select FW_LOADER 41 default y 42 help 43 Some PCMCIA cards require an updated Card Information Structure (CIS) 44 to be loaded from userspace to work correctly. If you say Y here, 45 and your userspace is arranged correctly, this will be loaded 46 automatically using the in-kernel firmware loader and the hotplug 47 subsystem, instead of relying on cardmgr from pcmcia-cs to do so. 48 49 If unsure, say Y. 50 51config CARDBUS 52 bool "32-bit CardBus support" 53 depends on PCI 54 default y 55 ---help--- 56 CardBus is a bus mastering architecture for PC-cards, which allows 57 for 32 bit PC-cards (the original PCMCIA standard specifies only 58 a 16 bit wide bus). Many newer PC-cards are actually CardBus cards. 59 60 To use 32 bit PC-cards, you also need a CardBus compatible host 61 bridge. Virtually all modern PCMCIA bridges do this, and most of 62 them are "yenta-compatible", so say Y or M there, too. 63 64 If unsure, say Y. 65 66comment "PC-card bridges" 67 68config YENTA 69 tristate "CardBus yenta-compatible bridge support" 70 depends on PCI 71 select CARDBUS if !EXPERT 72 select PCCARD_NONSTATIC if PCMCIA != n 73 ---help--- 74 This option enables support for CardBus host bridges. Virtually 75 all modern PCMCIA bridges are CardBus compatible. A "bridge" is 76 the hardware inside your computer that PCMCIA cards are plugged 77 into. 78 79 To compile this driver as modules, choose M here: the 80 module will be called yenta_socket. 81 82 If unsure, say Y. 83 84config YENTA_O2 85 default y 86 bool "Special initialization for O2Micro bridges" if EXPERT 87 depends on YENTA 88 89config YENTA_RICOH 90 default y 91 bool "Special initialization for Ricoh bridges" if EXPERT 92 depends on YENTA 93 94config YENTA_TI 95 default y 96 bool "Special initialization for TI and EnE bridges" if EXPERT 97 depends on YENTA 98 99config YENTA_ENE_TUNE 100 default y 101 bool "Auto-tune EnE bridges for CB cards" if EXPERT 102 depends on YENTA_TI && CARDBUS 103 104config YENTA_TOSHIBA 105 default y 106 bool "Special initialization for Toshiba ToPIC bridges" if EXPERT 107 depends on YENTA 108 109config PD6729 110 tristate "Cirrus PD6729 compatible bridge support" 111 depends on PCMCIA && PCI 112 select PCCARD_NONSTATIC 113 help 114 This provides support for the Cirrus PD6729 PCI-to-PCMCIA bridge 115 device, found in some older laptops and PCMCIA card readers. 116 117config I82092 118 tristate "i82092 compatible bridge support" 119 depends on PCMCIA && PCI 120 select PCCARD_NONSTATIC 121 help 122 This provides support for the Intel I82092AA PCI-to-PCMCIA bridge device, 123 found in some older laptops and more commonly in evaluation boards for the 124 chip. 125 126config I82365 127 tristate "i82365 compatible bridge support" 128 depends on PCMCIA && ISA 129 select PCCARD_NONSTATIC 130 help 131 Say Y here to include support for ISA-bus PCMCIA host bridges that 132 are register compatible with the Intel i82365. These are found on 133 older laptops and ISA-bus card readers for desktop systems. A 134 "bridge" is the hardware inside your computer that PCMCIA cards are 135 plugged into. If unsure, say N. 136 137config TCIC 138 tristate "Databook TCIC host bridge support" 139 depends on PCMCIA && ISA 140 select PCCARD_NONSTATIC 141 help 142 Say Y here to include support for the Databook TCIC family of PCMCIA 143 host bridges. These are only found on a handful of old systems. 144 "Bridge" is the name used for the hardware inside your computer that 145 PCMCIA cards are plugged into. If unsure, say N. 146 147config PCMCIA_ALCHEMY_DEVBOARD 148 tristate "Alchemy Db/Pb1xxx PCMCIA socket services" 149 depends on MIPS_ALCHEMY && PCMCIA 150 help 151 Enable this driver of you want PCMCIA support on your Alchemy 152 Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300 153 board. NOT suitable for the PB1000! 154 155 This driver is also available as a module called db1xxx_ss.ko 156 157config PCMCIA_XXS1500 158 tristate "MyCable XXS1500 PCMCIA socket support" 159 depends on PCMCIA && MIPS_XXS1500 160 help 161 Support for the PCMCIA/CF socket interface on MyCable XXS1500 162 systems. 163 164 This driver is also available as a module called xxs1500_ss.ko 165 166config PCMCIA_BCM63XX 167 tristate "bcm63xx pcmcia support" 168 depends on BCM63XX && PCMCIA 169 170config PCMCIA_SOC_COMMON 171 tristate 172 173config PCMCIA_SA11XX_BASE 174 tristate 175 176config PCMCIA_SA1100 177 tristate "SA1100 support" 178 depends on ARM && ARCH_SA1100 && PCMCIA 179 select PCMCIA_SOC_COMMON 180 select PCMCIA_SA11XX_BASE 181 help 182 Say Y here to include support for SA11x0-based PCMCIA or CF 183 sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/ 184 Xscale(R) embedded machines. 185 186 This driver is also available as a module called sa1100_cs. 187 188config PCMCIA_SA1111 189 tristate "SA1111 support" 190 depends on ARM && SA1111 && PCMCIA 191 select PCMCIA_SOC_COMMON 192 select PCMCIA_SA11XX_BASE if ARCH_SA1100 193 select PCMCIA_PXA2XX if ARCH_LUBBOCK && SA1111 194 help 195 Say Y here to include support for SA1111-based PCMCIA or CF 196 sockets, found on the Jornada 720, Graphicsmaster and other 197 StrongARM(R)/Xscale(R) embedded machines. 198 199 This driver is also available as a module called sa1111_cs. 200 201config PCMCIA_PXA2XX 202 tristate "PXA2xx support" 203 depends on ARM && ARCH_PXA && PCMCIA 204 depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ 205 || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ 206 || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2 \ 207 || MACH_VPAC270 || MACH_BALLOON3 || MACH_COLIBRI \ 208 || MACH_COLIBRI320 || MACH_H4700) 209 select PCMCIA_SOC_COMMON 210 help 211 Say Y here to include support for the PXA2xx PCMCIA controller 212 213config PCMCIA_DEBUG 214 bool "Enable debugging" 215 depends on (PCMCIA_SA1111 || PCMCIA_SA1100 || PCMCIA_PXA2XX) 216 help 217 Say Y here to enable debugging for the SoC PCMCIA layer. 218 You will need to choose the debugging level either via the 219 kernel command line, or module options depending whether 220 you build the drivers as modules. 221 222 The kernel command line options are: 223 sa11xx_core.pc_debug=N 224 pxa2xx_core.pc_debug=N 225 226 The module option is called pc_debug=N 227 228 In all the above examples, N is the debugging verbosity 229 level. 230 231config PCMCIA_PROBE 232 bool 233 default y if ISA && !ARCH_SA1100 && !PARISC 234 235config M32R_PCC 236 bool "M32R PCMCIA I/F" 237 depends on M32R && CHIP_M32700 && PCMCIA 238 help 239 Say Y here to use the M32R PCMCIA controller. 240 241config M32R_CFC 242 bool "M32R CF I/F Controller" 243 depends on M32R && (PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT) 244 help 245 Say Y here to use the M32R CompactFlash controller. 246 247config M32R_CFC_NUM 248 int "M32R CF I/F number" 249 depends on M32R_CFC 250 default "1" if PLAT_USRV || PLAT_M32700UT || PLAT_MAPPI2 || PLAT_MAPPI3 || PLAT_OPSPUT 251 help 252 Set the number of M32R CF slots. 253 254config PCMCIA_VRC4171 255 tristate "NEC VRC4171 Card Controllers support" 256 depends on CPU_VR41XX && ISA && PCMCIA 257 258config PCMCIA_VRC4173 259 tristate "NEC VRC4173 CARDU support" 260 depends on CPU_VR41XX && PCI && PCMCIA 261 262config OMAP_CF 263 tristate "OMAP CompactFlash Controller" 264 depends on PCMCIA && ARCH_OMAP16XX 265 help 266 Say Y here to support the CompactFlash controller on OMAP. 267 Note that this doesn't support "True IDE" mode. 268 269config BFIN_CFPCMCIA 270 tristate "Blackfin CompactFlash PCMCIA Driver" 271 depends on PCMCIA && BLACKFIN 272 help 273 Say Y here to support the CompactFlash PCMCIA driver for Blackfin. 274 275 276config AT91_CF 277 tristate "AT91 CompactFlash Controller" 278 depends on PCI 279 depends on PCMCIA && ARCH_AT91 280 help 281 Say Y here to support the CompactFlash controller on AT91 chips. 282 Or choose M to compile the driver as a module named "at91_cf". 283 284config ELECTRA_CF 285 tristate "Electra CompactFlash Controller" 286 depends on PCMCIA && PPC_PASEMI 287 help 288 Say Y here to support the CompactFlash controller on the 289 PA Semi Electra eval board. 290 291config PCCARD_NONSTATIC 292 bool 293 294config PCCARD_IODYN 295 bool 296 297endif # PCCARD 298