1 /* 2 * This file contains work-arounds for many known PCI hardware 3 * bugs. Devices present only on certain architectures (host 4 * bridges et cetera) should be handled in arch-specific code. 5 * 6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. 7 * 8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz> 9 * 10 * Init/reset quirks for USB host controllers should be in the 11 * USB quirks file, where their drivers can access reuse it. 12 */ 13 14 #include <linux/types.h> 15 #include <linux/kernel.h> 16 #include <linux/export.h> 17 #include <linux/pci.h> 18 #include <linux/init.h> 19 #include <linux/delay.h> 20 #include <linux/acpi.h> 21 #include <linux/kallsyms.h> 22 #include <linux/dmi.h> 23 #include <linux/pci-aspm.h> 24 #include <linux/ioport.h> 25 #include <linux/sched.h> 26 #include <linux/ktime.h> 27 #include <linux/mm.h> 28 #include <asm/dma.h> /* isa_dma_bridge_buggy */ 29 #include "pci.h" 30 31 /* 32 * Decoding should be disabled for a PCI device during BAR sizing to avoid 33 * conflict. But doing so may cause problems on host bridge and perhaps other 34 * key system devices. For devices that need to have mmio decoding always-on, 35 * we need to set the dev->mmio_always_on bit. 36 */ 37 static void quirk_mmio_always_on(struct pci_dev *dev) 38 { 39 dev->mmio_always_on = 1; 40 } 41 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, 42 PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); 43 44 /* The Mellanox Tavor device gives false positive parity errors 45 * Mark this device with a broken_parity_status, to allow 46 * PCI scanning code to "skip" this now blacklisted device. 47 */ 48 static void quirk_mellanox_tavor(struct pci_dev *dev) 49 { 50 dev->broken_parity_status = 1; /* This device gives false positives */ 51 } 52 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); 53 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); 54 55 /* Deal with broken BIOSes that neglect to enable passive release, 56 which can cause problems in combination with the 82441FX/PPro MTRRs */ 57 static void quirk_passive_release(struct pci_dev *dev) 58 { 59 struct pci_dev *d = NULL; 60 unsigned char dlc; 61 62 /* We have to make sure a particular bit is set in the PIIX3 63 ISA bridge, so we have to go out and find it. */ 64 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { 65 pci_read_config_byte(d, 0x82, &dlc); 66 if (!(dlc & 1<<1)) { 67 dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); 68 dlc |= 1<<1; 69 pci_write_config_byte(d, 0x82, dlc); 70 } 71 } 72 } 73 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 74 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 75 76 /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround 77 but VIA don't answer queries. If you happen to have good contacts at VIA 78 ask them for me please -- Alan 79 80 This appears to be BIOS not version dependent. So presumably there is a 81 chipset level fix */ 82 83 static void quirk_isa_dma_hangs(struct pci_dev *dev) 84 { 85 if (!isa_dma_bridge_buggy) { 86 isa_dma_bridge_buggy = 1; 87 dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); 88 } 89 } 90 /* 91 * Its not totally clear which chipsets are the problematic ones 92 * We know 82C586 and 82C596 variants are affected. 93 */ 94 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); 95 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); 96 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); 97 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); 98 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); 99 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); 100 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); 101 102 /* 103 * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear 104 * for some HT machines to use C4 w/o hanging. 105 */ 106 static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) 107 { 108 u32 pmbase; 109 u16 pm1a; 110 111 pci_read_config_dword(dev, 0x40, &pmbase); 112 pmbase = pmbase & 0xff80; 113 pm1a = inw(pmbase); 114 115 if (pm1a & 0x10) { 116 dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); 117 outw(0x10, pmbase); 118 } 119 } 120 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); 121 122 /* 123 * Chipsets where PCI->PCI transfers vanish or hang 124 */ 125 static void quirk_nopcipci(struct pci_dev *dev) 126 { 127 if ((pci_pci_problems & PCIPCI_FAIL) == 0) { 128 dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); 129 pci_pci_problems |= PCIPCI_FAIL; 130 } 131 } 132 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); 133 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); 134 135 static void quirk_nopciamd(struct pci_dev *dev) 136 { 137 u8 rev; 138 pci_read_config_byte(dev, 0x08, &rev); 139 if (rev == 0x13) { 140 /* Erratum 24 */ 141 dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); 142 pci_pci_problems |= PCIAGP_FAIL; 143 } 144 } 145 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); 146 147 /* 148 * Triton requires workarounds to be used by the drivers 149 */ 150 static void quirk_triton(struct pci_dev *dev) 151 { 152 if ((pci_pci_problems&PCIPCI_TRITON) == 0) { 153 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 154 pci_pci_problems |= PCIPCI_TRITON; 155 } 156 } 157 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); 158 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); 159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); 160 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); 161 162 /* 163 * VIA Apollo KT133 needs PCI latency patch 164 * Made according to a windows driver based patch by George E. Breese 165 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm 166 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for 167 * the info on which Mr Breese based his work. 168 * 169 * Updated based on further information from the site and also on 170 * information provided by VIA 171 */ 172 static void quirk_vialatency(struct pci_dev *dev) 173 { 174 struct pci_dev *p; 175 u8 busarb; 176 /* Ok we have a potential problem chipset here. Now see if we have 177 a buggy southbridge */ 178 179 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); 180 if (p != NULL) { 181 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ 182 /* Check for buggy part revisions */ 183 if (p->revision < 0x40 || p->revision > 0x42) 184 goto exit; 185 } else { 186 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); 187 if (p == NULL) /* No problem parts */ 188 goto exit; 189 /* Check for buggy part revisions */ 190 if (p->revision < 0x10 || p->revision > 0x12) 191 goto exit; 192 } 193 194 /* 195 * Ok we have the problem. Now set the PCI master grant to 196 * occur every master grant. The apparent bug is that under high 197 * PCI load (quite common in Linux of course) you can get data 198 * loss when the CPU is held off the bus for 3 bus master requests 199 * This happens to include the IDE controllers.... 200 * 201 * VIA only apply this fix when an SB Live! is present but under 202 * both Linux and Windows this isn't enough, and we have seen 203 * corruption without SB Live! but with things like 3 UDMA IDE 204 * controllers. So we ignore that bit of the VIA recommendation.. 205 */ 206 207 pci_read_config_byte(dev, 0x76, &busarb); 208 /* Set bit 4 and bi 5 of byte 76 to 0x01 209 "Master priority rotation on every PCI master grant */ 210 busarb &= ~(1<<5); 211 busarb |= (1<<4); 212 pci_write_config_byte(dev, 0x76, busarb); 213 dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); 214 exit: 215 pci_dev_put(p); 216 } 217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 218 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 219 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 220 /* Must restore this on a resume from RAM */ 221 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 222 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 223 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 224 225 /* 226 * VIA Apollo VP3 needs ETBF on BT848/878 227 */ 228 static void quirk_viaetbf(struct pci_dev *dev) 229 { 230 if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { 231 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 232 pci_pci_problems |= PCIPCI_VIAETBF; 233 } 234 } 235 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); 236 237 static void quirk_vsfx(struct pci_dev *dev) 238 { 239 if ((pci_pci_problems&PCIPCI_VSFX) == 0) { 240 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 241 pci_pci_problems |= PCIPCI_VSFX; 242 } 243 } 244 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); 245 246 /* 247 * Ali Magik requires workarounds to be used by the drivers 248 * that DMA to AGP space. Latency must be set to 0xA and triton 249 * workaround applied too 250 * [Info kindly provided by ALi] 251 */ 252 static void quirk_alimagik(struct pci_dev *dev) 253 { 254 if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { 255 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 256 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; 257 } 258 } 259 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); 260 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); 261 262 /* 263 * Natoma has some interesting boundary conditions with Zoran stuff 264 * at least 265 */ 266 static void quirk_natoma(struct pci_dev *dev) 267 { 268 if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { 269 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 270 pci_pci_problems |= PCIPCI_NATOMA; 271 } 272 } 273 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); 274 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); 275 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); 276 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); 277 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); 278 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); 279 280 /* 281 * This chip can cause PCI parity errors if config register 0xA0 is read 282 * while DMAs are occurring. 283 */ 284 static void quirk_citrine(struct pci_dev *dev) 285 { 286 dev->cfg_size = 0xA0; 287 } 288 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); 289 290 /* 291 * This chip can cause bus lockups if config addresses above 0x600 292 * are read or written. 293 */ 294 static void quirk_nfp6000(struct pci_dev *dev) 295 { 296 dev->cfg_size = 0x600; 297 } 298 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); 299 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); 300 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); 301 302 /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ 303 static void quirk_extend_bar_to_page(struct pci_dev *dev) 304 { 305 int i; 306 307 for (i = 0; i < PCI_STD_RESOURCE_END; i++) { 308 struct resource *r = &dev->resource[i]; 309 310 if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { 311 r->end = PAGE_SIZE - 1; 312 r->start = 0; 313 r->flags |= IORESOURCE_UNSET; 314 dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", 315 i, r); 316 } 317 } 318 } 319 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); 320 321 /* 322 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. 323 * If it's needed, re-allocate the region. 324 */ 325 static void quirk_s3_64M(struct pci_dev *dev) 326 { 327 struct resource *r = &dev->resource[0]; 328 329 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { 330 r->flags |= IORESOURCE_UNSET; 331 r->start = 0; 332 r->end = 0x3ffffff; 333 } 334 } 335 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); 336 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); 337 338 static void quirk_io(struct pci_dev *dev, int pos, unsigned size, 339 const char *name) 340 { 341 u32 region; 342 struct pci_bus_region bus_region; 343 struct resource *res = dev->resource + pos; 344 345 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); 346 347 if (!region) 348 return; 349 350 res->name = pci_name(dev); 351 res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; 352 res->flags |= 353 (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); 354 region &= ~(size - 1); 355 356 /* Convert from PCI bus to resource space */ 357 bus_region.start = region; 358 bus_region.end = region + size - 1; 359 pcibios_bus_to_resource(dev->bus, res, &bus_region); 360 361 dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", 362 name, PCI_BASE_ADDRESS_0 + (pos << 2), res); 363 } 364 365 /* 366 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS 367 * ver. 1.33 20070103) don't set the correct ISA PCI region header info. 368 * BAR0 should be 8 bytes; instead, it may be set to something like 8k 369 * (which conflicts w/ BAR1's memory range). 370 * 371 * CS553x's ISA PCI BARs may also be read-only (ref: 372 * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). 373 */ 374 static void quirk_cs5536_vsa(struct pci_dev *dev) 375 { 376 static char *name = "CS5536 ISA bridge"; 377 378 if (pci_resource_len(dev, 0) != 8) { 379 quirk_io(dev, 0, 8, name); /* SMB */ 380 quirk_io(dev, 1, 256, name); /* GPIO */ 381 quirk_io(dev, 2, 64, name); /* MFGPT */ 382 dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", 383 name); 384 } 385 } 386 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); 387 388 static void quirk_io_region(struct pci_dev *dev, int port, 389 unsigned size, int nr, const char *name) 390 { 391 u16 region; 392 struct pci_bus_region bus_region; 393 struct resource *res = dev->resource + nr; 394 395 pci_read_config_word(dev, port, ®ion); 396 region &= ~(size - 1); 397 398 if (!region) 399 return; 400 401 res->name = pci_name(dev); 402 res->flags = IORESOURCE_IO; 403 404 /* Convert from PCI bus to resource space */ 405 bus_region.start = region; 406 bus_region.end = region + size - 1; 407 pcibios_bus_to_resource(dev->bus, res, &bus_region); 408 409 if (!pci_claim_resource(dev, nr)) 410 dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); 411 } 412 413 /* 414 * ATI Northbridge setups MCE the processor if you even 415 * read somewhere between 0x3b0->0x3bb or read 0x3d3 416 */ 417 static void quirk_ati_exploding_mce(struct pci_dev *dev) 418 { 419 dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); 420 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ 421 request_region(0x3b0, 0x0C, "RadeonIGP"); 422 request_region(0x3d3, 0x01, "RadeonIGP"); 423 } 424 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); 425 426 /* 427 * In the AMD NL platform, this device ([1022:7912]) has a class code of 428 * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will 429 * claim it. 430 * But the dwc3 driver is a more specific driver for this device, and we'd 431 * prefer to use it instead of xhci. To prevent xhci from claiming the 432 * device, change the class code to 0x0c03fe, which the PCI r3.0 spec 433 * defines as "USB device (not host controller)". The dwc3 driver can then 434 * claim it based on its Vendor and Device ID. 435 */ 436 static void quirk_amd_nl_class(struct pci_dev *pdev) 437 { 438 u32 class = pdev->class; 439 440 /* Use "USB Device (not host controller)" class */ 441 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; 442 dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", 443 class, pdev->class); 444 } 445 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, 446 quirk_amd_nl_class); 447 448 /* 449 * Let's make the southbridge information explicit instead 450 * of having to worry about people probing the ACPI areas, 451 * for example.. (Yes, it happens, and if you read the wrong 452 * ACPI register it will put the machine to sleep with no 453 * way of waking it up again. Bummer). 454 * 455 * ALI M7101: Two IO regions pointed to by words at 456 * 0xE0 (64 bytes of ACPI registers) 457 * 0xE2 (32 bytes of SMB registers) 458 */ 459 static void quirk_ali7101_acpi(struct pci_dev *dev) 460 { 461 quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); 462 quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); 463 } 464 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); 465 466 static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 467 { 468 u32 devres; 469 u32 mask, size, base; 470 471 pci_read_config_dword(dev, port, &devres); 472 if ((devres & enable) != enable) 473 return; 474 mask = (devres >> 16) & 15; 475 base = devres & 0xffff; 476 size = 16; 477 for (;;) { 478 unsigned bit = size >> 1; 479 if ((bit & mask) == bit) 480 break; 481 size = bit; 482 } 483 /* 484 * For now we only print it out. Eventually we'll want to 485 * reserve it (at least if it's in the 0x1000+ range), but 486 * let's get enough confirmation reports first. 487 */ 488 base &= -size; 489 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, 490 base + size - 1); 491 } 492 493 static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 494 { 495 u32 devres; 496 u32 mask, size, base; 497 498 pci_read_config_dword(dev, port, &devres); 499 if ((devres & enable) != enable) 500 return; 501 base = devres & 0xffff0000; 502 mask = (devres & 0x3f) << 16; 503 size = 128 << 16; 504 for (;;) { 505 unsigned bit = size >> 1; 506 if ((bit & mask) == bit) 507 break; 508 size = bit; 509 } 510 /* 511 * For now we only print it out. Eventually we'll want to 512 * reserve it, but let's get enough confirmation reports first. 513 */ 514 base &= -size; 515 dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, 516 base + size - 1); 517 } 518 519 /* 520 * PIIX4 ACPI: Two IO regions pointed to by longwords at 521 * 0x40 (64 bytes of ACPI registers) 522 * 0x90 (16 bytes of SMB registers) 523 * and a few strange programmable PIIX4 device resources. 524 */ 525 static void quirk_piix4_acpi(struct pci_dev *dev) 526 { 527 u32 res_a; 528 529 quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); 530 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); 531 532 /* Device resource A has enables for some of the other ones */ 533 pci_read_config_dword(dev, 0x5c, &res_a); 534 535 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); 536 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); 537 538 /* Device resource D is just bitfields for static resources */ 539 540 /* Device 12 enabled? */ 541 if (res_a & (1 << 29)) { 542 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); 543 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); 544 } 545 /* Device 13 enabled? */ 546 if (res_a & (1 << 30)) { 547 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); 548 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); 549 } 550 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); 551 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); 552 } 553 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); 554 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); 555 556 #define ICH_PMBASE 0x40 557 #define ICH_ACPI_CNTL 0x44 558 #define ICH4_ACPI_EN 0x10 559 #define ICH6_ACPI_EN 0x80 560 #define ICH4_GPIOBASE 0x58 561 #define ICH4_GPIO_CNTL 0x5c 562 #define ICH4_GPIO_EN 0x10 563 #define ICH6_GPIOBASE 0x48 564 #define ICH6_GPIO_CNTL 0x4c 565 #define ICH6_GPIO_EN 0x10 566 567 /* 568 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at 569 * 0x40 (128 bytes of ACPI, GPIO & TCO registers) 570 * 0x58 (64 bytes of GPIO I/O space) 571 */ 572 static void quirk_ich4_lpc_acpi(struct pci_dev *dev) 573 { 574 u8 enable; 575 576 /* 577 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict 578 * with low legacy (and fixed) ports. We don't know the decoding 579 * priority and can't tell whether the legacy device or the one created 580 * here is really at that address. This happens on boards with broken 581 * BIOSes. 582 */ 583 584 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 585 if (enable & ICH4_ACPI_EN) 586 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 587 "ICH4 ACPI/GPIO/TCO"); 588 589 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); 590 if (enable & ICH4_GPIO_EN) 591 quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 592 "ICH4 GPIO"); 593 } 594 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); 595 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); 596 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); 597 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); 598 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); 599 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); 600 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); 601 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); 602 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); 603 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); 604 605 static void ich6_lpc_acpi_gpio(struct pci_dev *dev) 606 { 607 u8 enable; 608 609 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 610 if (enable & ICH6_ACPI_EN) 611 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 612 "ICH6 ACPI/GPIO/TCO"); 613 614 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); 615 if (enable & ICH6_GPIO_EN) 616 quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 617 "ICH6 GPIO"); 618 } 619 620 static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) 621 { 622 u32 val; 623 u32 size, base; 624 625 pci_read_config_dword(dev, reg, &val); 626 627 /* Enabled? */ 628 if (!(val & 1)) 629 return; 630 base = val & 0xfffc; 631 if (dynsize) { 632 /* 633 * This is not correct. It is 16, 32 or 64 bytes depending on 634 * register D31:F0:ADh bits 5:4. 635 * 636 * But this gets us at least _part_ of it. 637 */ 638 size = 16; 639 } else { 640 size = 128; 641 } 642 base &= ~(size-1); 643 644 /* Just print it out for now. We should reserve it after more debugging */ 645 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); 646 } 647 648 static void quirk_ich6_lpc(struct pci_dev *dev) 649 { 650 /* Shared ACPI/GPIO decode with all ICH6+ */ 651 ich6_lpc_acpi_gpio(dev); 652 653 /* ICH6-specific generic IO decode */ 654 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); 655 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); 656 } 657 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); 658 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); 659 660 static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) 661 { 662 u32 val; 663 u32 mask, base; 664 665 pci_read_config_dword(dev, reg, &val); 666 667 /* Enabled? */ 668 if (!(val & 1)) 669 return; 670 671 /* 672 * IO base in bits 15:2, mask in bits 23:18, both 673 * are dword-based 674 */ 675 base = val & 0xfffc; 676 mask = (val >> 16) & 0xfc; 677 mask |= 3; 678 679 /* Just print it out for now. We should reserve it after more debugging */ 680 dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); 681 } 682 683 /* ICH7-10 has the same common LPC generic IO decode registers */ 684 static void quirk_ich7_lpc(struct pci_dev *dev) 685 { 686 /* We share the common ACPI/GPIO decode with ICH6 */ 687 ich6_lpc_acpi_gpio(dev); 688 689 /* And have 4 ICH7+ generic decodes */ 690 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); 691 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); 692 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); 693 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); 694 } 695 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); 696 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); 697 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); 698 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); 699 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); 700 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); 701 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); 702 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); 703 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); 704 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); 705 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); 706 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); 707 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); 708 709 /* 710 * VIA ACPI: One IO region pointed to by longword at 711 * 0x48 or 0x20 (256 bytes of ACPI registers) 712 */ 713 static void quirk_vt82c586_acpi(struct pci_dev *dev) 714 { 715 if (dev->revision & 0x10) 716 quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, 717 "vt82c586 ACPI"); 718 } 719 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); 720 721 /* 722 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at 723 * 0x48 (256 bytes of ACPI registers) 724 * 0x70 (128 bytes of hardware monitoring register) 725 * 0x90 (16 bytes of SMB registers) 726 */ 727 static void quirk_vt82c686_acpi(struct pci_dev *dev) 728 { 729 quirk_vt82c586_acpi(dev); 730 731 quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, 732 "vt82c686 HW-mon"); 733 734 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); 735 } 736 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); 737 738 /* 739 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at 740 * 0x88 (128 bytes of power management registers) 741 * 0xd0 (16 bytes of SMB registers) 742 */ 743 static void quirk_vt8235_acpi(struct pci_dev *dev) 744 { 745 quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); 746 quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); 747 } 748 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); 749 750 /* 751 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: 752 * Disable fast back-to-back on the secondary bus segment 753 */ 754 static void quirk_xio2000a(struct pci_dev *dev) 755 { 756 struct pci_dev *pdev; 757 u16 command; 758 759 dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); 760 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { 761 pci_read_config_word(pdev, PCI_COMMAND, &command); 762 if (command & PCI_COMMAND_FAST_BACK) 763 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); 764 } 765 } 766 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, 767 quirk_xio2000a); 768 769 #ifdef CONFIG_X86_IO_APIC 770 771 #include <asm/io_apic.h> 772 773 /* 774 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip 775 * devices to the external APIC. 776 * 777 * TODO: When we have device-specific interrupt routers, 778 * this code will go away from quirks. 779 */ 780 static void quirk_via_ioapic(struct pci_dev *dev) 781 { 782 u8 tmp; 783 784 if (nr_ioapics < 1) 785 tmp = 0; /* nothing routed to external APIC */ 786 else 787 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ 788 789 dev_info(&dev->dev, "%sbling VIA external APIC routing\n", 790 tmp == 0 ? "Disa" : "Ena"); 791 792 /* Offset 0x58: External APIC IRQ output control */ 793 pci_write_config_byte(dev, 0x58, tmp); 794 } 795 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 796 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 797 798 /* 799 * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. 800 * This leads to doubled level interrupt rates. 801 * Set this bit to get rid of cycle wastage. 802 * Otherwise uncritical. 803 */ 804 static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) 805 { 806 u8 misc_control2; 807 #define BYPASS_APIC_DEASSERT 8 808 809 pci_read_config_byte(dev, 0x5B, &misc_control2); 810 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { 811 dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); 812 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); 813 } 814 } 815 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 816 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 817 818 /* 819 * The AMD io apic can hang the box when an apic irq is masked. 820 * We check all revs >= B0 (yet not in the pre production!) as the bug 821 * is currently marked NoFix 822 * 823 * We have multiple reports of hangs with this chipset that went away with 824 * noapic specified. For the moment we assume it's the erratum. We may be wrong 825 * of course. However the advice is demonstrably good even if so.. 826 */ 827 static void quirk_amd_ioapic(struct pci_dev *dev) 828 { 829 if (dev->revision >= 0x02) { 830 dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); 831 dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); 832 } 833 } 834 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); 835 #endif /* CONFIG_X86_IO_APIC */ 836 837 #if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS) 838 839 static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) 840 { 841 /* Fix for improper SRIOV configuration on Cavium cn88xx RNM device */ 842 if (dev->subsystem_device == 0xa118) 843 dev->sriov->link = dev->devfn; 844 } 845 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link); 846 #endif 847 848 /* 849 * Some settings of MMRBC can lead to data corruption so block changes. 850 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide 851 */ 852 static void quirk_amd_8131_mmrbc(struct pci_dev *dev) 853 { 854 if (dev->subordinate && dev->revision <= 0x12) { 855 dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", 856 dev->revision); 857 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; 858 } 859 } 860 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); 861 862 /* 863 * FIXME: it is questionable that quirk_via_acpi 864 * is needed. It shows up as an ISA bridge, and does not 865 * support the PCI_INTERRUPT_LINE register at all. Therefore 866 * it seems like setting the pci_dev's 'irq' to the 867 * value of the ACPI SCI interrupt is only done for convenience. 868 * -jgarzik 869 */ 870 static void quirk_via_acpi(struct pci_dev *d) 871 { 872 /* 873 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 874 */ 875 u8 irq; 876 pci_read_config_byte(d, 0x42, &irq); 877 irq &= 0xf; 878 if (irq && (irq != 2)) 879 d->irq = irq; 880 } 881 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); 882 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); 883 884 885 /* 886 * VIA bridges which have VLink 887 */ 888 889 static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; 890 891 static void quirk_via_bridge(struct pci_dev *dev) 892 { 893 /* See what bridge we have and find the device ranges */ 894 switch (dev->device) { 895 case PCI_DEVICE_ID_VIA_82C686: 896 /* The VT82C686 is special, it attaches to PCI and can have 897 any device number. All its subdevices are functions of 898 that single device. */ 899 via_vlink_dev_lo = PCI_SLOT(dev->devfn); 900 via_vlink_dev_hi = PCI_SLOT(dev->devfn); 901 break; 902 case PCI_DEVICE_ID_VIA_8237: 903 case PCI_DEVICE_ID_VIA_8237A: 904 via_vlink_dev_lo = 15; 905 break; 906 case PCI_DEVICE_ID_VIA_8235: 907 via_vlink_dev_lo = 16; 908 break; 909 case PCI_DEVICE_ID_VIA_8231: 910 case PCI_DEVICE_ID_VIA_8233_0: 911 case PCI_DEVICE_ID_VIA_8233A: 912 case PCI_DEVICE_ID_VIA_8233C_0: 913 via_vlink_dev_lo = 17; 914 break; 915 } 916 } 917 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); 918 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); 919 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); 920 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); 921 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); 922 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); 923 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); 924 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); 925 926 /** 927 * quirk_via_vlink - VIA VLink IRQ number update 928 * @dev: PCI device 929 * 930 * If the device we are dealing with is on a PIC IRQ we need to 931 * ensure that the IRQ line register which usually is not relevant 932 * for PCI cards, is actually written so that interrupts get sent 933 * to the right place. 934 * We only do this on systems where a VIA south bridge was detected, 935 * and only for VIA devices on the motherboard (see quirk_via_bridge 936 * above). 937 */ 938 939 static void quirk_via_vlink(struct pci_dev *dev) 940 { 941 u8 irq, new_irq; 942 943 /* Check if we have VLink at all */ 944 if (via_vlink_dev_lo == -1) 945 return; 946 947 new_irq = dev->irq; 948 949 /* Don't quirk interrupts outside the legacy IRQ range */ 950 if (!new_irq || new_irq > 15) 951 return; 952 953 /* Internal device ? */ 954 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || 955 PCI_SLOT(dev->devfn) < via_vlink_dev_lo) 956 return; 957 958 /* This is an internal VLink device on a PIC interrupt. The BIOS 959 ought to have set this but may not have, so we redo it */ 960 961 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 962 if (new_irq != irq) { 963 dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", 964 irq, new_irq); 965 udelay(15); /* unknown if delay really needed */ 966 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); 967 } 968 } 969 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); 970 971 /* 972 * VIA VT82C598 has its device ID settable and many BIOSes 973 * set it to the ID of VT82C597 for backward compatibility. 974 * We need to switch it off to be able to recognize the real 975 * type of the chip. 976 */ 977 static void quirk_vt82c598_id(struct pci_dev *dev) 978 { 979 pci_write_config_byte(dev, 0xfc, 0); 980 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); 981 } 982 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); 983 984 /* 985 * CardBus controllers have a legacy base address that enables them 986 * to respond as i82365 pcmcia controllers. We don't want them to 987 * do this even if the Linux CardBus driver is not loaded, because 988 * the Linux i82365 driver does not (and should not) handle CardBus. 989 */ 990 static void quirk_cardbus_legacy(struct pci_dev *dev) 991 { 992 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); 993 } 994 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 995 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 996 DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, 997 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 998 999 /* 1000 * Following the PCI ordering rules is optional on the AMD762. I'm not 1001 * sure what the designers were smoking but let's not inhale... 1002 * 1003 * To be fair to AMD, it follows the spec by default, its BIOS people 1004 * who turn it off! 1005 */ 1006 static void quirk_amd_ordering(struct pci_dev *dev) 1007 { 1008 u32 pcic; 1009 pci_read_config_dword(dev, 0x4C, &pcic); 1010 if ((pcic & 6) != 6) { 1011 pcic |= 6; 1012 dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); 1013 pci_write_config_dword(dev, 0x4C, pcic); 1014 pci_read_config_dword(dev, 0x84, &pcic); 1015 pcic |= (1 << 23); /* Required in this mode */ 1016 pci_write_config_dword(dev, 0x84, pcic); 1017 } 1018 } 1019 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1020 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1021 1022 /* 1023 * DreamWorks provided workaround for Dunord I-3000 problem 1024 * 1025 * This card decodes and responds to addresses not apparently 1026 * assigned to it. We force a larger allocation to ensure that 1027 * nothing gets put too close to it. 1028 */ 1029 static void quirk_dunord(struct pci_dev *dev) 1030 { 1031 struct resource *r = &dev->resource[1]; 1032 1033 r->flags |= IORESOURCE_UNSET; 1034 r->start = 0; 1035 r->end = 0xffffff; 1036 } 1037 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); 1038 1039 /* 1040 * i82380FB mobile docking controller: its PCI-to-PCI bridge 1041 * is subtractive decoding (transparent), and does indicate this 1042 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 1043 * instead of 0x01. 1044 */ 1045 static void quirk_transparent_bridge(struct pci_dev *dev) 1046 { 1047 dev->transparent = 1; 1048 } 1049 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); 1050 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); 1051 1052 /* 1053 * Common misconfiguration of the MediaGX/Geode PCI master that will 1054 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 1055 * datasheets found at http://www.national.com/analog for info on what 1056 * these bits do. <christer@weinigel.se> 1057 */ 1058 static void quirk_mediagx_master(struct pci_dev *dev) 1059 { 1060 u8 reg; 1061 1062 pci_read_config_byte(dev, 0x41, ®); 1063 if (reg & 2) { 1064 reg &= ~2; 1065 dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", 1066 reg); 1067 pci_write_config_byte(dev, 0x41, reg); 1068 } 1069 } 1070 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1071 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1072 1073 /* 1074 * Ensure C0 rev restreaming is off. This is normally done by 1075 * the BIOS but in the odd case it is not the results are corruption 1076 * hence the presence of a Linux check 1077 */ 1078 static void quirk_disable_pxb(struct pci_dev *pdev) 1079 { 1080 u16 config; 1081 1082 if (pdev->revision != 0x04) /* Only C0 requires this */ 1083 return; 1084 pci_read_config_word(pdev, 0x40, &config); 1085 if (config & (1<<6)) { 1086 config &= ~(1<<6); 1087 pci_write_config_word(pdev, 0x40, config); 1088 dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); 1089 } 1090 } 1091 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1092 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1093 1094 static void quirk_amd_ide_mode(struct pci_dev *pdev) 1095 { 1096 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ 1097 u8 tmp; 1098 1099 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); 1100 if (tmp == 0x01) { 1101 pci_read_config_byte(pdev, 0x40, &tmp); 1102 pci_write_config_byte(pdev, 0x40, tmp|1); 1103 pci_write_config_byte(pdev, 0x9, 1); 1104 pci_write_config_byte(pdev, 0xa, 6); 1105 pci_write_config_byte(pdev, 0x40, tmp); 1106 1107 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; 1108 dev_info(&pdev->dev, "set SATA to AHCI mode\n"); 1109 } 1110 } 1111 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1112 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1113 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1114 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1115 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1116 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1117 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1118 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1119 1120 /* 1121 * Serverworks CSB5 IDE does not fully support native mode 1122 */ 1123 static void quirk_svwks_csb5ide(struct pci_dev *pdev) 1124 { 1125 u8 prog; 1126 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1127 if (prog & 5) { 1128 prog &= ~5; 1129 pdev->class &= ~5; 1130 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1131 /* PCI layer will sort out resources */ 1132 } 1133 } 1134 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); 1135 1136 /* 1137 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same 1138 */ 1139 static void quirk_ide_samemode(struct pci_dev *pdev) 1140 { 1141 u8 prog; 1142 1143 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1144 1145 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { 1146 dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); 1147 prog &= ~5; 1148 pdev->class &= ~5; 1149 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1150 } 1151 } 1152 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); 1153 1154 /* 1155 * Some ATA devices break if put into D3 1156 */ 1157 1158 static void quirk_no_ata_d3(struct pci_dev *pdev) 1159 { 1160 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; 1161 } 1162 /* Quirk the legacy ATA devices only. The AHCI ones are ok */ 1163 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, 1164 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1165 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 1166 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1167 /* ALi loses some register settings that we cannot then restore */ 1168 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, 1169 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1170 /* VIA comes back fine but we need to keep it alive or ACPI GTM failures 1171 occur when mode detecting */ 1172 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, 1173 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1174 1175 /* This was originally an Alpha specific thing, but it really fits here. 1176 * The i82375 PCI/EISA bridge appears as non-classified. Fix that. 1177 */ 1178 static void quirk_eisa_bridge(struct pci_dev *dev) 1179 { 1180 dev->class = PCI_CLASS_BRIDGE_EISA << 8; 1181 } 1182 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); 1183 1184 1185 /* 1186 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge 1187 * is not activated. The myth is that Asus said that they do not want the 1188 * users to be irritated by just another PCI Device in the Win98 device 1189 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors 1190 * package 2.7.0 for details) 1191 * 1192 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC 1193 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 1194 * becomes necessary to do this tweak in two steps -- the chosen trigger 1195 * is either the Host bridge (preferred) or on-board VGA controller. 1196 * 1197 * Note that we used to unhide the SMBus that way on Toshiba laptops 1198 * (Satellite A40 and Tecra M2) but then found that the thermal management 1199 * was done by SMM code, which could cause unsynchronized concurrent 1200 * accesses to the SMBus registers, with potentially bad effects. Thus you 1201 * should be very careful when adding new entries: if SMM is accessing the 1202 * Intel SMBus, this is a very good reason to leave it hidden. 1203 * 1204 * Likewise, many recent laptops use ACPI for thermal management. If the 1205 * ACPI DSDT code accesses the SMBus, then Linux should not access it 1206 * natively, and keeping the SMBus hidden is the right thing to do. If you 1207 * are about to add an entry in the table below, please first disassemble 1208 * the DSDT and double-check that there is no code accessing the SMBus. 1209 */ 1210 static int asus_hides_smbus; 1211 1212 static void asus_hides_smbus_hostbridge(struct pci_dev *dev) 1213 { 1214 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1215 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) 1216 switch (dev->subsystem_device) { 1217 case 0x8025: /* P4B-LX */ 1218 case 0x8070: /* P4B */ 1219 case 0x8088: /* P4B533 */ 1220 case 0x1626: /* L3C notebook */ 1221 asus_hides_smbus = 1; 1222 } 1223 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) 1224 switch (dev->subsystem_device) { 1225 case 0x80b1: /* P4GE-V */ 1226 case 0x80b2: /* P4PE */ 1227 case 0x8093: /* P4B533-V */ 1228 asus_hides_smbus = 1; 1229 } 1230 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) 1231 switch (dev->subsystem_device) { 1232 case 0x8030: /* P4T533 */ 1233 asus_hides_smbus = 1; 1234 } 1235 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) 1236 switch (dev->subsystem_device) { 1237 case 0x8070: /* P4G8X Deluxe */ 1238 asus_hides_smbus = 1; 1239 } 1240 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) 1241 switch (dev->subsystem_device) { 1242 case 0x80c9: /* PU-DLS */ 1243 asus_hides_smbus = 1; 1244 } 1245 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) 1246 switch (dev->subsystem_device) { 1247 case 0x1751: /* M2N notebook */ 1248 case 0x1821: /* M5N notebook */ 1249 case 0x1897: /* A6L notebook */ 1250 asus_hides_smbus = 1; 1251 } 1252 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1253 switch (dev->subsystem_device) { 1254 case 0x184b: /* W1N notebook */ 1255 case 0x186a: /* M6Ne notebook */ 1256 asus_hides_smbus = 1; 1257 } 1258 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1259 switch (dev->subsystem_device) { 1260 case 0x80f2: /* P4P800-X */ 1261 asus_hides_smbus = 1; 1262 } 1263 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) 1264 switch (dev->subsystem_device) { 1265 case 0x1882: /* M6V notebook */ 1266 case 0x1977: /* A6VA notebook */ 1267 asus_hides_smbus = 1; 1268 } 1269 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { 1270 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1271 switch (dev->subsystem_device) { 1272 case 0x088C: /* HP Compaq nc8000 */ 1273 case 0x0890: /* HP Compaq nc6000 */ 1274 asus_hides_smbus = 1; 1275 } 1276 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1277 switch (dev->subsystem_device) { 1278 case 0x12bc: /* HP D330L */ 1279 case 0x12bd: /* HP D530 */ 1280 case 0x006a: /* HP Compaq nx9500 */ 1281 asus_hides_smbus = 1; 1282 } 1283 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) 1284 switch (dev->subsystem_device) { 1285 case 0x12bf: /* HP xw4100 */ 1286 asus_hides_smbus = 1; 1287 } 1288 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { 1289 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1290 switch (dev->subsystem_device) { 1291 case 0xC00C: /* Samsung P35 notebook */ 1292 asus_hides_smbus = 1; 1293 } 1294 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { 1295 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1296 switch (dev->subsystem_device) { 1297 case 0x0058: /* Compaq Evo N620c */ 1298 asus_hides_smbus = 1; 1299 } 1300 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) 1301 switch (dev->subsystem_device) { 1302 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ 1303 /* Motherboard doesn't have Host bridge 1304 * subvendor/subdevice IDs, therefore checking 1305 * its on-board VGA controller */ 1306 asus_hides_smbus = 1; 1307 } 1308 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) 1309 switch (dev->subsystem_device) { 1310 case 0x00b8: /* Compaq Evo D510 CMT */ 1311 case 0x00b9: /* Compaq Evo D510 SFF */ 1312 case 0x00ba: /* Compaq Evo D510 USDT */ 1313 /* Motherboard doesn't have Host bridge 1314 * subvendor/subdevice IDs and on-board VGA 1315 * controller is disabled if an AGP card is 1316 * inserted, therefore checking USB UHCI 1317 * Controller #1 */ 1318 asus_hides_smbus = 1; 1319 } 1320 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) 1321 switch (dev->subsystem_device) { 1322 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ 1323 /* Motherboard doesn't have host bridge 1324 * subvendor/subdevice IDs, therefore checking 1325 * its on-board VGA controller */ 1326 asus_hides_smbus = 1; 1327 } 1328 } 1329 } 1330 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); 1331 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); 1332 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); 1333 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); 1334 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); 1335 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); 1336 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); 1337 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); 1338 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); 1339 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); 1340 1341 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); 1342 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); 1343 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); 1344 1345 static void asus_hides_smbus_lpc(struct pci_dev *dev) 1346 { 1347 u16 val; 1348 1349 if (likely(!asus_hides_smbus)) 1350 return; 1351 1352 pci_read_config_word(dev, 0xF2, &val); 1353 if (val & 0x8) { 1354 pci_write_config_word(dev, 0xF2, val & (~0x8)); 1355 pci_read_config_word(dev, 0xF2, &val); 1356 if (val & 0x8) 1357 dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", 1358 val); 1359 else 1360 dev_info(&dev->dev, "Enabled i801 SMBus device\n"); 1361 } 1362 } 1363 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1364 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1365 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1366 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1367 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1368 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1369 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1370 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1371 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1372 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1373 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1374 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1375 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1376 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1377 1378 /* It appears we just have one such device. If not, we have a warning */ 1379 static void __iomem *asus_rcba_base; 1380 static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) 1381 { 1382 u32 rcba; 1383 1384 if (likely(!asus_hides_smbus)) 1385 return; 1386 WARN_ON(asus_rcba_base); 1387 1388 pci_read_config_dword(dev, 0xF0, &rcba); 1389 /* use bits 31:14, 16 kB aligned */ 1390 asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); 1391 if (asus_rcba_base == NULL) 1392 return; 1393 } 1394 1395 static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) 1396 { 1397 u32 val; 1398 1399 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1400 return; 1401 /* read the Function Disable register, dword mode only */ 1402 val = readl(asus_rcba_base + 0x3418); 1403 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ 1404 } 1405 1406 static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) 1407 { 1408 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1409 return; 1410 iounmap(asus_rcba_base); 1411 asus_rcba_base = NULL; 1412 dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); 1413 } 1414 1415 static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) 1416 { 1417 asus_hides_smbus_lpc_ich6_suspend(dev); 1418 asus_hides_smbus_lpc_ich6_resume_early(dev); 1419 asus_hides_smbus_lpc_ich6_resume(dev); 1420 } 1421 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); 1422 DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); 1423 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); 1424 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); 1425 1426 /* 1427 * SiS 96x south bridge: BIOS typically hides SMBus device... 1428 */ 1429 static void quirk_sis_96x_smbus(struct pci_dev *dev) 1430 { 1431 u8 val = 0; 1432 pci_read_config_byte(dev, 0x77, &val); 1433 if (val & 0x10) { 1434 dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); 1435 pci_write_config_byte(dev, 0x77, val & ~0x10); 1436 } 1437 } 1438 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1439 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1440 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1441 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1442 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1443 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1444 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1445 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1446 1447 /* 1448 * ... This is further complicated by the fact that some SiS96x south 1449 * bridges pretend to be 85C503/5513 instead. In that case see if we 1450 * spotted a compatible north bridge to make sure. 1451 * (pci_find_device doesn't work yet) 1452 * 1453 * We can also enable the sis96x bit in the discovery register.. 1454 */ 1455 #define SIS_DETECT_REGISTER 0x40 1456 1457 static void quirk_sis_503(struct pci_dev *dev) 1458 { 1459 u8 reg; 1460 u16 devid; 1461 1462 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); 1463 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); 1464 pci_read_config_word(dev, PCI_DEVICE_ID, &devid); 1465 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { 1466 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); 1467 return; 1468 } 1469 1470 /* 1471 * Ok, it now shows up as a 96x.. run the 96x quirk by 1472 * hand in case it has already been processed. 1473 * (depends on link order, which is apparently not guaranteed) 1474 */ 1475 dev->device = devid; 1476 quirk_sis_96x_smbus(dev); 1477 } 1478 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1479 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1480 1481 1482 /* 1483 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller 1484 * and MC97 modem controller are disabled when a second PCI soundcard is 1485 * present. This patch, tweaking the VT8237 ISA bridge, enables them. 1486 * -- bjd 1487 */ 1488 static void asus_hides_ac97_lpc(struct pci_dev *dev) 1489 { 1490 u8 val; 1491 int asus_hides_ac97 = 0; 1492 1493 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1494 if (dev->device == PCI_DEVICE_ID_VIA_8237) 1495 asus_hides_ac97 = 1; 1496 } 1497 1498 if (!asus_hides_ac97) 1499 return; 1500 1501 pci_read_config_byte(dev, 0x50, &val); 1502 if (val & 0xc0) { 1503 pci_write_config_byte(dev, 0x50, val & (~0xc0)); 1504 pci_read_config_byte(dev, 0x50, &val); 1505 if (val & 0xc0) 1506 dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", 1507 val); 1508 else 1509 dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); 1510 } 1511 } 1512 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1513 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1514 1515 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) 1516 1517 /* 1518 * If we are using libata we can drive this chip properly but must 1519 * do this early on to make the additional device appear during 1520 * the PCI scanning. 1521 */ 1522 static void quirk_jmicron_ata(struct pci_dev *pdev) 1523 { 1524 u32 conf1, conf5, class; 1525 u8 hdr; 1526 1527 /* Only poke fn 0 */ 1528 if (PCI_FUNC(pdev->devfn)) 1529 return; 1530 1531 pci_read_config_dword(pdev, 0x40, &conf1); 1532 pci_read_config_dword(pdev, 0x80, &conf5); 1533 1534 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ 1535 conf5 &= ~(1 << 24); /* Clear bit 24 */ 1536 1537 switch (pdev->device) { 1538 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ 1539 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ 1540 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ 1541 /* The controller should be in single function ahci mode */ 1542 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ 1543 break; 1544 1545 case PCI_DEVICE_ID_JMICRON_JMB365: 1546 case PCI_DEVICE_ID_JMICRON_JMB366: 1547 /* Redirect IDE second PATA port to the right spot */ 1548 conf5 |= (1 << 24); 1549 /* Fall through */ 1550 case PCI_DEVICE_ID_JMICRON_JMB361: 1551 case PCI_DEVICE_ID_JMICRON_JMB363: 1552 case PCI_DEVICE_ID_JMICRON_JMB369: 1553 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ 1554 /* Set the class codes correctly and then direct IDE 0 */ 1555 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ 1556 break; 1557 1558 case PCI_DEVICE_ID_JMICRON_JMB368: 1559 /* The controller should be in single function IDE mode */ 1560 conf1 |= 0x00C00000; /* Set 22, 23 */ 1561 break; 1562 } 1563 1564 pci_write_config_dword(pdev, 0x40, conf1); 1565 pci_write_config_dword(pdev, 0x80, conf5); 1566 1567 /* Update pdev accordingly */ 1568 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); 1569 pdev->hdr_type = hdr & 0x7f; 1570 pdev->multifunction = !!(hdr & 0x80); 1571 1572 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); 1573 pdev->class = class >> 8; 1574 } 1575 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1576 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1577 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1578 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1579 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1580 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1581 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1582 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1583 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1584 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1585 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1586 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1587 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1588 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1589 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1590 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1591 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1592 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1593 1594 #endif 1595 1596 static void quirk_jmicron_async_suspend(struct pci_dev *dev) 1597 { 1598 if (dev->multifunction) { 1599 device_disable_async_suspend(&dev->dev); 1600 dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); 1601 } 1602 } 1603 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); 1604 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); 1605 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); 1606 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); 1607 1608 #ifdef CONFIG_X86_IO_APIC 1609 static void quirk_alder_ioapic(struct pci_dev *pdev) 1610 { 1611 int i; 1612 1613 if ((pdev->class >> 8) != 0xff00) 1614 return; 1615 1616 /* the first BAR is the location of the IO APIC...we must 1617 * not touch this (and it's already covered by the fixmap), so 1618 * forcibly insert it into the resource tree */ 1619 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) 1620 insert_resource(&iomem_resource, &pdev->resource[0]); 1621 1622 /* The next five BARs all seem to be rubbish, so just clean 1623 * them out */ 1624 for (i = 1; i < 6; i++) 1625 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); 1626 } 1627 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); 1628 #endif 1629 1630 static void quirk_pcie_mch(struct pci_dev *pdev) 1631 { 1632 pdev->no_msi = 1; 1633 } 1634 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); 1635 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); 1636 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); 1637 1638 1639 /* 1640 * It's possible for the MSI to get corrupted if shpc and acpi 1641 * are used together on certain PXH-based systems. 1642 */ 1643 static void quirk_pcie_pxh(struct pci_dev *dev) 1644 { 1645 dev->no_msi = 1; 1646 dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); 1647 } 1648 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); 1649 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); 1650 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); 1651 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); 1652 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); 1653 1654 /* 1655 * Some Intel PCI Express chipsets have trouble with downstream 1656 * device power management. 1657 */ 1658 static void quirk_intel_pcie_pm(struct pci_dev *dev) 1659 { 1660 pci_pm_d3_delay = 120; 1661 dev->no_d1d2 = 1; 1662 } 1663 1664 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); 1665 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); 1666 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); 1667 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); 1668 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); 1669 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); 1670 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); 1671 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); 1672 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); 1673 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); 1674 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); 1675 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); 1676 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); 1677 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); 1678 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); 1679 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); 1680 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); 1681 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); 1682 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); 1683 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); 1684 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); 1685 1686 #ifdef CONFIG_X86_IO_APIC 1687 /* 1688 * Boot interrupts on some chipsets cannot be turned off. For these chipsets, 1689 * remap the original interrupt in the linux kernel to the boot interrupt, so 1690 * that a PCI device's interrupt handler is installed on the boot interrupt 1691 * line instead. 1692 */ 1693 static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) 1694 { 1695 if (noioapicquirk || noioapicreroute) 1696 return; 1697 1698 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; 1699 dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", 1700 dev->vendor, dev->device); 1701 } 1702 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1703 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1704 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1705 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1706 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1707 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1708 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1709 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1710 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1711 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1712 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1713 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1714 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1715 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1716 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1717 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1718 1719 /* 1720 * On some chipsets we can disable the generation of legacy INTx boot 1721 * interrupts. 1722 */ 1723 1724 /* 1725 * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no 1726 * 300641-004US, section 5.7.3. 1727 */ 1728 #define INTEL_6300_IOAPIC_ABAR 0x40 1729 #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) 1730 1731 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) 1732 { 1733 u16 pci_config_word; 1734 1735 if (noioapicquirk) 1736 return; 1737 1738 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); 1739 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; 1740 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); 1741 1742 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1743 dev->vendor, dev->device); 1744 } 1745 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1746 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1747 1748 /* 1749 * disable boot interrupts on HT-1000 1750 */ 1751 #define BC_HT1000_FEATURE_REG 0x64 1752 #define BC_HT1000_PIC_REGS_ENABLE (1<<0) 1753 #define BC_HT1000_MAP_IDX 0xC00 1754 #define BC_HT1000_MAP_DATA 0xC01 1755 1756 static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) 1757 { 1758 u32 pci_config_dword; 1759 u8 irq; 1760 1761 if (noioapicquirk) 1762 return; 1763 1764 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); 1765 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | 1766 BC_HT1000_PIC_REGS_ENABLE); 1767 1768 for (irq = 0x10; irq < 0x10 + 32; irq++) { 1769 outb(irq, BC_HT1000_MAP_IDX); 1770 outb(0x00, BC_HT1000_MAP_DATA); 1771 } 1772 1773 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); 1774 1775 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1776 dev->vendor, dev->device); 1777 } 1778 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1779 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1780 1781 /* 1782 * disable boot interrupts on AMD and ATI chipsets 1783 */ 1784 /* 1785 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 1786 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode 1787 * (due to an erratum). 1788 */ 1789 #define AMD_813X_MISC 0x40 1790 #define AMD_813X_NOIOAMODE (1<<0) 1791 #define AMD_813X_REV_B1 0x12 1792 #define AMD_813X_REV_B2 0x13 1793 1794 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) 1795 { 1796 u32 pci_config_dword; 1797 1798 if (noioapicquirk) 1799 return; 1800 if ((dev->revision == AMD_813X_REV_B1) || 1801 (dev->revision == AMD_813X_REV_B2)) 1802 return; 1803 1804 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); 1805 pci_config_dword &= ~AMD_813X_NOIOAMODE; 1806 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); 1807 1808 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1809 dev->vendor, dev->device); 1810 } 1811 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1812 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1813 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1814 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1815 1816 #define AMD_8111_PCI_IRQ_ROUTING 0x56 1817 1818 static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) 1819 { 1820 u16 pci_config_word; 1821 1822 if (noioapicquirk) 1823 return; 1824 1825 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); 1826 if (!pci_config_word) { 1827 dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", 1828 dev->vendor, dev->device); 1829 return; 1830 } 1831 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); 1832 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1833 dev->vendor, dev->device); 1834 } 1835 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1836 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1837 #endif /* CONFIG_X86_IO_APIC */ 1838 1839 /* 1840 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size 1841 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. 1842 * Re-allocate the region if needed... 1843 */ 1844 static void quirk_tc86c001_ide(struct pci_dev *dev) 1845 { 1846 struct resource *r = &dev->resource[0]; 1847 1848 if (r->start & 0x8) { 1849 r->flags |= IORESOURCE_UNSET; 1850 r->start = 0; 1851 r->end = 0xf; 1852 } 1853 } 1854 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, 1855 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, 1856 quirk_tc86c001_ide); 1857 1858 /* 1859 * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the 1860 * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) 1861 * being read correctly if bit 7 of the base address is set. 1862 * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). 1863 * Re-allocate the regions to a 256-byte boundary if necessary. 1864 */ 1865 static void quirk_plx_pci9050(struct pci_dev *dev) 1866 { 1867 unsigned int bar; 1868 1869 /* Fixed in revision 2 (PCI 9052). */ 1870 if (dev->revision >= 2) 1871 return; 1872 for (bar = 0; bar <= 1; bar++) 1873 if (pci_resource_len(dev, bar) == 0x80 && 1874 (pci_resource_start(dev, bar) & 0x80)) { 1875 struct resource *r = &dev->resource[bar]; 1876 dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", 1877 bar); 1878 r->flags |= IORESOURCE_UNSET; 1879 r->start = 0; 1880 r->end = 0xff; 1881 } 1882 } 1883 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 1884 quirk_plx_pci9050); 1885 /* 1886 * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) 1887 * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, 1888 * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, 1889 * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. 1890 * 1891 * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" 1892 * driver. 1893 */ 1894 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); 1895 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); 1896 1897 static void quirk_netmos(struct pci_dev *dev) 1898 { 1899 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; 1900 unsigned int num_serial = dev->subsystem_device & 0xf; 1901 1902 /* 1903 * These Netmos parts are multiport serial devices with optional 1904 * parallel ports. Even when parallel ports are present, they 1905 * are identified as class SERIAL, which means the serial driver 1906 * will claim them. To prevent this, mark them as class OTHER. 1907 * These combo devices should be claimed by parport_serial. 1908 * 1909 * The subdevice ID is of the form 0x00PS, where <P> is the number 1910 * of parallel ports and <S> is the number of serial ports. 1911 */ 1912 switch (dev->device) { 1913 case PCI_DEVICE_ID_NETMOS_9835: 1914 /* Well, this rule doesn't hold for the following 9835 device */ 1915 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 1916 dev->subsystem_device == 0x0299) 1917 return; 1918 case PCI_DEVICE_ID_NETMOS_9735: 1919 case PCI_DEVICE_ID_NETMOS_9745: 1920 case PCI_DEVICE_ID_NETMOS_9845: 1921 case PCI_DEVICE_ID_NETMOS_9855: 1922 if (num_parallel) { 1923 dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", 1924 dev->device, num_parallel, num_serial); 1925 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | 1926 (dev->class & 0xff); 1927 } 1928 } 1929 } 1930 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, 1931 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); 1932 1933 /* 1934 * Quirk non-zero PCI functions to route VPD access through function 0 for 1935 * devices that share VPD resources between functions. The functions are 1936 * expected to be identical devices. 1937 */ 1938 static void quirk_f0_vpd_link(struct pci_dev *dev) 1939 { 1940 struct pci_dev *f0; 1941 1942 if (!PCI_FUNC(dev->devfn)) 1943 return; 1944 1945 f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); 1946 if (!f0) 1947 return; 1948 1949 if (f0->vpd && dev->class == f0->class && 1950 dev->vendor == f0->vendor && dev->device == f0->device) 1951 dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; 1952 1953 pci_dev_put(f0); 1954 } 1955 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 1956 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); 1957 1958 static void quirk_e100_interrupt(struct pci_dev *dev) 1959 { 1960 u16 command, pmcsr; 1961 u8 __iomem *csr; 1962 u8 cmd_hi; 1963 1964 switch (dev->device) { 1965 /* PCI IDs taken from drivers/net/e100.c */ 1966 case 0x1029: 1967 case 0x1030 ... 0x1034: 1968 case 0x1038 ... 0x103E: 1969 case 0x1050 ... 0x1057: 1970 case 0x1059: 1971 case 0x1064 ... 0x106B: 1972 case 0x1091 ... 0x1095: 1973 case 0x1209: 1974 case 0x1229: 1975 case 0x2449: 1976 case 0x2459: 1977 case 0x245D: 1978 case 0x27DC: 1979 break; 1980 default: 1981 return; 1982 } 1983 1984 /* 1985 * Some firmware hands off the e100 with interrupts enabled, 1986 * which can cause a flood of interrupts if packets are 1987 * received before the driver attaches to the device. So 1988 * disable all e100 interrupts here. The driver will 1989 * re-enable them when it's ready. 1990 */ 1991 pci_read_config_word(dev, PCI_COMMAND, &command); 1992 1993 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) 1994 return; 1995 1996 /* 1997 * Check that the device is in the D0 power state. If it's not, 1998 * there is no point to look any further. 1999 */ 2000 if (dev->pm_cap) { 2001 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); 2002 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) 2003 return; 2004 } 2005 2006 /* Convert from PCI bus to resource space. */ 2007 csr = ioremap(pci_resource_start(dev, 0), 8); 2008 if (!csr) { 2009 dev_warn(&dev->dev, "Can't map e100 registers\n"); 2010 return; 2011 } 2012 2013 cmd_hi = readb(csr + 3); 2014 if (cmd_hi == 0) { 2015 dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); 2016 writeb(1, csr + 3); 2017 } 2018 2019 iounmap(csr); 2020 } 2021 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 2022 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); 2023 2024 /* 2025 * The 82575 and 82598 may experience data corruption issues when transitioning 2026 * out of L0S. To prevent this we need to disable L0S on the pci-e link 2027 */ 2028 static void quirk_disable_aspm_l0s(struct pci_dev *dev) 2029 { 2030 dev_info(&dev->dev, "Disabling L0s\n"); 2031 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); 2032 } 2033 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); 2034 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); 2035 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); 2036 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); 2037 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); 2038 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); 2039 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); 2040 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); 2041 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); 2042 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); 2043 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); 2044 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); 2045 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); 2046 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); 2047 2048 static void fixup_rev1_53c810(struct pci_dev *dev) 2049 { 2050 u32 class = dev->class; 2051 2052 /* 2053 * rev 1 ncr53c810 chips don't set the class at all which means 2054 * they don't get their resources remapped. Fix that here. 2055 */ 2056 if (class) 2057 return; 2058 2059 dev->class = PCI_CLASS_STORAGE_SCSI << 8; 2060 dev_info(&dev->dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", 2061 class, dev->class); 2062 } 2063 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); 2064 2065 /* Enable 1k I/O space granularity on the Intel P64H2 */ 2066 static void quirk_p64h2_1k_io(struct pci_dev *dev) 2067 { 2068 u16 en1k; 2069 2070 pci_read_config_word(dev, 0x40, &en1k); 2071 2072 if (en1k & 0x200) { 2073 dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); 2074 dev->io_window_1k = 1; 2075 } 2076 } 2077 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); 2078 2079 /* Under some circumstances, AER is not linked with extended capabilities. 2080 * Force it to be linked by setting the corresponding control bit in the 2081 * config space. 2082 */ 2083 static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) 2084 { 2085 uint8_t b; 2086 if (pci_read_config_byte(dev, 0xf41, &b) == 0) { 2087 if (!(b & 0x20)) { 2088 pci_write_config_byte(dev, 0xf41, b | 0x20); 2089 dev_info(&dev->dev, "Linking AER extended capability\n"); 2090 } 2091 } 2092 } 2093 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2094 quirk_nvidia_ck804_pcie_aer_ext_cap); 2095 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2096 quirk_nvidia_ck804_pcie_aer_ext_cap); 2097 2098 static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) 2099 { 2100 /* 2101 * Disable PCI Bus Parking and PCI Master read caching on CX700 2102 * which causes unspecified timing errors with a VT6212L on the PCI 2103 * bus leading to USB2.0 packet loss. 2104 * 2105 * This quirk is only enabled if a second (on the external PCI bus) 2106 * VT6212L is found -- the CX700 core itself also contains a USB 2107 * host controller with the same PCI ID as the VT6212L. 2108 */ 2109 2110 /* Count VT6212L instances */ 2111 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, 2112 PCI_DEVICE_ID_VIA_8235_USB_2, NULL); 2113 uint8_t b; 2114 2115 /* p should contain the first (internal) VT6212L -- see if we have 2116 an external one by searching again */ 2117 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); 2118 if (!p) 2119 return; 2120 pci_dev_put(p); 2121 2122 if (pci_read_config_byte(dev, 0x76, &b) == 0) { 2123 if (b & 0x40) { 2124 /* Turn off PCI Bus Parking */ 2125 pci_write_config_byte(dev, 0x76, b ^ 0x40); 2126 2127 dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); 2128 } 2129 } 2130 2131 if (pci_read_config_byte(dev, 0x72, &b) == 0) { 2132 if (b != 0) { 2133 /* Turn off PCI Master read caching */ 2134 pci_write_config_byte(dev, 0x72, 0x0); 2135 2136 /* Set PCI Master Bus time-out to "1x16 PCLK" */ 2137 pci_write_config_byte(dev, 0x75, 0x1); 2138 2139 /* Disable "Read FIFO Timer" */ 2140 pci_write_config_byte(dev, 0x77, 0x0); 2141 2142 dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); 2143 } 2144 } 2145 } 2146 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); 2147 2148 /* 2149 * If a device follows the VPD format spec, the PCI core will not read or 2150 * write past the VPD End Tag. But some vendors do not follow the VPD 2151 * format spec, so we can't tell how much data is safe to access. Devices 2152 * may behave unpredictably if we access too much. Blacklist these devices 2153 * so we don't touch VPD at all. 2154 */ 2155 static void quirk_blacklist_vpd(struct pci_dev *dev) 2156 { 2157 if (dev->vpd) { 2158 dev->vpd->len = 0; 2159 dev_warn(&dev->dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); 2160 } 2161 } 2162 2163 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); 2164 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); 2165 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); 2166 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); 2167 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); 2168 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); 2169 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); 2170 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); 2171 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); 2172 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); 2173 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); 2174 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, 2175 quirk_blacklist_vpd); 2176 2177 /* 2178 * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the 2179 * VPD end tag will hang the device. This problem was initially 2180 * observed when a vpd entry was created in sysfs 2181 * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry 2182 * will dump 32k of data. Reading a full 32k will cause an access 2183 * beyond the VPD end tag causing the device to hang. Once the device 2184 * is hung, the bnx2 driver will not be able to reset the device. 2185 * We believe that it is legal to read beyond the end tag and 2186 * therefore the solution is to limit the read/write length. 2187 */ 2188 static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) 2189 { 2190 /* 2191 * Only disable the VPD capability for 5706, 5706S, 5708, 2192 * 5708S and 5709 rev. A 2193 */ 2194 if ((dev->device == PCI_DEVICE_ID_NX2_5706) || 2195 (dev->device == PCI_DEVICE_ID_NX2_5706S) || 2196 (dev->device == PCI_DEVICE_ID_NX2_5708) || 2197 (dev->device == PCI_DEVICE_ID_NX2_5708S) || 2198 ((dev->device == PCI_DEVICE_ID_NX2_5709) && 2199 (dev->revision & 0xf0) == 0x0)) { 2200 if (dev->vpd) 2201 dev->vpd->len = 0x80; 2202 } 2203 } 2204 2205 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2206 PCI_DEVICE_ID_NX2_5706, 2207 quirk_brcm_570x_limit_vpd); 2208 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2209 PCI_DEVICE_ID_NX2_5706S, 2210 quirk_brcm_570x_limit_vpd); 2211 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2212 PCI_DEVICE_ID_NX2_5708, 2213 quirk_brcm_570x_limit_vpd); 2214 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2215 PCI_DEVICE_ID_NX2_5708S, 2216 quirk_brcm_570x_limit_vpd); 2217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2218 PCI_DEVICE_ID_NX2_5709, 2219 quirk_brcm_570x_limit_vpd); 2220 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2221 PCI_DEVICE_ID_NX2_5709S, 2222 quirk_brcm_570x_limit_vpd); 2223 2224 static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) 2225 { 2226 u32 rev; 2227 2228 pci_read_config_dword(dev, 0xf4, &rev); 2229 2230 /* Only CAP the MRRS if the device is a 5719 A0 */ 2231 if (rev == 0x05719000) { 2232 int readrq = pcie_get_readrq(dev); 2233 if (readrq > 2048) 2234 pcie_set_readrq(dev, 2048); 2235 } 2236 } 2237 2238 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, 2239 PCI_DEVICE_ID_TIGON3_5719, 2240 quirk_brcm_5719_limit_mrrs); 2241 2242 /* Originally in EDAC sources for i82875P: 2243 * Intel tells BIOS developers to hide device 6 which 2244 * configures the overflow device access containing 2245 * the DRBs - this is where we expose device 6. 2246 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 2247 */ 2248 static void quirk_unhide_mch_dev6(struct pci_dev *dev) 2249 { 2250 u8 reg; 2251 2252 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { 2253 dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); 2254 pci_write_config_byte(dev, 0xF4, reg | 0x02); 2255 } 2256 } 2257 2258 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, 2259 quirk_unhide_mch_dev6); 2260 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, 2261 quirk_unhide_mch_dev6); 2262 2263 #ifdef CONFIG_TILEPRO 2264 /* 2265 * The Tilera TILEmpower tilepro platform needs to set the link speed 2266 * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed 2267 * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe 2268 * capability register of the PEX8624 PCIe switch. The switch 2269 * supports link speed auto negotiation, but falsely sets 2270 * the link speed to 5GT/s. 2271 */ 2272 static void quirk_tile_plx_gen1(struct pci_dev *dev) 2273 { 2274 if (tile_plx_gen1) { 2275 pci_write_config_dword(dev, 0x98, 0x1); 2276 mdelay(50); 2277 } 2278 } 2279 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); 2280 #endif /* CONFIG_TILEPRO */ 2281 2282 #ifdef CONFIG_PCI_MSI 2283 /* Some chipsets do not support MSI. We cannot easily rely on setting 2284 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually 2285 * some other buses controlled by the chipset even if Linux is not 2286 * aware of it. Instead of setting the flag on all buses in the 2287 * machine, simply disable MSI globally. 2288 */ 2289 static void quirk_disable_all_msi(struct pci_dev *dev) 2290 { 2291 pci_no_msi(); 2292 dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); 2293 } 2294 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); 2295 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); 2296 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); 2297 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); 2298 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); 2299 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); 2300 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); 2301 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); 2302 2303 /* Disable MSI on chipsets that are known to not support it */ 2304 static void quirk_disable_msi(struct pci_dev *dev) 2305 { 2306 if (dev->subordinate) { 2307 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2308 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2309 } 2310 } 2311 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); 2312 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); 2313 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); 2314 2315 /* 2316 * The APC bridge device in AMD 780 family northbridges has some random 2317 * OEM subsystem ID in its vendor ID register (erratum 18), so instead 2318 * we use the possible vendor/device IDs of the host bridge for the 2319 * declared quirk, and search for the APC bridge by slot number. 2320 */ 2321 static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) 2322 { 2323 struct pci_dev *apc_bridge; 2324 2325 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); 2326 if (apc_bridge) { 2327 if (apc_bridge->device == 0x9602) 2328 quirk_disable_msi(apc_bridge); 2329 pci_dev_put(apc_bridge); 2330 } 2331 } 2332 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); 2333 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); 2334 2335 /* Go through the list of Hypertransport capabilities and 2336 * return 1 if a HT MSI capability is found and enabled */ 2337 static int msi_ht_cap_enabled(struct pci_dev *dev) 2338 { 2339 int pos, ttl = PCI_FIND_CAP_TTL; 2340 2341 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2342 while (pos && ttl--) { 2343 u8 flags; 2344 2345 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2346 &flags) == 0) { 2347 dev_info(&dev->dev, "Found %s HT MSI Mapping\n", 2348 flags & HT_MSI_FLAGS_ENABLE ? 2349 "enabled" : "disabled"); 2350 return (flags & HT_MSI_FLAGS_ENABLE) != 0; 2351 } 2352 2353 pos = pci_find_next_ht_capability(dev, pos, 2354 HT_CAPTYPE_MSI_MAPPING); 2355 } 2356 return 0; 2357 } 2358 2359 /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ 2360 static void quirk_msi_ht_cap(struct pci_dev *dev) 2361 { 2362 if (dev->subordinate && !msi_ht_cap_enabled(dev)) { 2363 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2364 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2365 } 2366 } 2367 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, 2368 quirk_msi_ht_cap); 2369 2370 /* The nVidia CK804 chipset may have 2 HT MSI mappings. 2371 * MSI are supported if the MSI capability set in any of these mappings. 2372 */ 2373 static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) 2374 { 2375 struct pci_dev *pdev; 2376 2377 if (!dev->subordinate) 2378 return; 2379 2380 /* check HT MSI cap on this chipset and the root one. 2381 * a single one having MSI is enough to be sure that MSI are supported. 2382 */ 2383 pdev = pci_get_slot(dev->bus, 0); 2384 if (!pdev) 2385 return; 2386 if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { 2387 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2388 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2389 } 2390 pci_dev_put(pdev); 2391 } 2392 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2393 quirk_nvidia_ck804_msi_ht_cap); 2394 2395 /* Force enable MSI mapping capability on HT bridges */ 2396 static void ht_enable_msi_mapping(struct pci_dev *dev) 2397 { 2398 int pos, ttl = PCI_FIND_CAP_TTL; 2399 2400 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2401 while (pos && ttl--) { 2402 u8 flags; 2403 2404 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2405 &flags) == 0) { 2406 dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); 2407 2408 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2409 flags | HT_MSI_FLAGS_ENABLE); 2410 } 2411 pos = pci_find_next_ht_capability(dev, pos, 2412 HT_CAPTYPE_MSI_MAPPING); 2413 } 2414 } 2415 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 2416 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, 2417 ht_enable_msi_mapping); 2418 2419 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, 2420 ht_enable_msi_mapping); 2421 2422 /* The P5N32-SLI motherboards from Asus have a problem with msi 2423 * for the MCP55 NIC. It is not yet determined whether the msi problem 2424 * also affects other devices. As for now, turn off msi for this device. 2425 */ 2426 static void nvenet_msi_disable(struct pci_dev *dev) 2427 { 2428 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); 2429 2430 if (board_name && 2431 (strstr(board_name, "P5N32-SLI PREMIUM") || 2432 strstr(board_name, "P5N32-E SLI"))) { 2433 dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); 2434 dev->no_msi = 1; 2435 } 2436 } 2437 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2438 PCI_DEVICE_ID_NVIDIA_NVENET_15, 2439 nvenet_msi_disable); 2440 2441 /* 2442 * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing 2443 * config register. This register controls the routing of legacy 2444 * interrupts from devices that route through the MCP55. If this register 2445 * is misprogrammed, interrupts are only sent to the BSP, unlike 2446 * conventional systems where the IRQ is broadcast to all online CPUs. Not 2447 * having this register set properly prevents kdump from booting up 2448 * properly, so let's make sure that we have it set correctly. 2449 * Note that this is an undocumented register. 2450 */ 2451 static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) 2452 { 2453 u32 cfg; 2454 2455 if (!pci_find_capability(dev, PCI_CAP_ID_HT)) 2456 return; 2457 2458 pci_read_config_dword(dev, 0x74, &cfg); 2459 2460 if (cfg & ((1 << 2) | (1 << 15))) { 2461 printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); 2462 cfg &= ~((1 << 2) | (1 << 15)); 2463 pci_write_config_dword(dev, 0x74, cfg); 2464 } 2465 } 2466 2467 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2468 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, 2469 nvbridge_check_legacy_irq_routing); 2470 2471 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2472 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, 2473 nvbridge_check_legacy_irq_routing); 2474 2475 static int ht_check_msi_mapping(struct pci_dev *dev) 2476 { 2477 int pos, ttl = PCI_FIND_CAP_TTL; 2478 int found = 0; 2479 2480 /* check if there is HT MSI cap or enabled on this device */ 2481 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2482 while (pos && ttl--) { 2483 u8 flags; 2484 2485 if (found < 1) 2486 found = 1; 2487 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2488 &flags) == 0) { 2489 if (flags & HT_MSI_FLAGS_ENABLE) { 2490 if (found < 2) { 2491 found = 2; 2492 break; 2493 } 2494 } 2495 } 2496 pos = pci_find_next_ht_capability(dev, pos, 2497 HT_CAPTYPE_MSI_MAPPING); 2498 } 2499 2500 return found; 2501 } 2502 2503 static int host_bridge_with_leaf(struct pci_dev *host_bridge) 2504 { 2505 struct pci_dev *dev; 2506 int pos; 2507 int i, dev_no; 2508 int found = 0; 2509 2510 dev_no = host_bridge->devfn >> 3; 2511 for (i = dev_no + 1; i < 0x20; i++) { 2512 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); 2513 if (!dev) 2514 continue; 2515 2516 /* found next host bridge ?*/ 2517 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2518 if (pos != 0) { 2519 pci_dev_put(dev); 2520 break; 2521 } 2522 2523 if (ht_check_msi_mapping(dev)) { 2524 found = 1; 2525 pci_dev_put(dev); 2526 break; 2527 } 2528 pci_dev_put(dev); 2529 } 2530 2531 return found; 2532 } 2533 2534 #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ 2535 #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ 2536 2537 static int is_end_of_ht_chain(struct pci_dev *dev) 2538 { 2539 int pos, ctrl_off; 2540 int end = 0; 2541 u16 flags, ctrl; 2542 2543 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2544 2545 if (!pos) 2546 goto out; 2547 2548 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); 2549 2550 ctrl_off = ((flags >> 10) & 1) ? 2551 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; 2552 pci_read_config_word(dev, pos + ctrl_off, &ctrl); 2553 2554 if (ctrl & (1 << 6)) 2555 end = 1; 2556 2557 out: 2558 return end; 2559 } 2560 2561 static void nv_ht_enable_msi_mapping(struct pci_dev *dev) 2562 { 2563 struct pci_dev *host_bridge; 2564 int pos; 2565 int i, dev_no; 2566 int found = 0; 2567 2568 dev_no = dev->devfn >> 3; 2569 for (i = dev_no; i >= 0; i--) { 2570 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); 2571 if (!host_bridge) 2572 continue; 2573 2574 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2575 if (pos != 0) { 2576 found = 1; 2577 break; 2578 } 2579 pci_dev_put(host_bridge); 2580 } 2581 2582 if (!found) 2583 return; 2584 2585 /* don't enable end_device/host_bridge with leaf directly here */ 2586 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && 2587 host_bridge_with_leaf(host_bridge)) 2588 goto out; 2589 2590 /* root did that ! */ 2591 if (msi_ht_cap_enabled(host_bridge)) 2592 goto out; 2593 2594 ht_enable_msi_mapping(dev); 2595 2596 out: 2597 pci_dev_put(host_bridge); 2598 } 2599 2600 static void ht_disable_msi_mapping(struct pci_dev *dev) 2601 { 2602 int pos, ttl = PCI_FIND_CAP_TTL; 2603 2604 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2605 while (pos && ttl--) { 2606 u8 flags; 2607 2608 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2609 &flags) == 0) { 2610 dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); 2611 2612 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2613 flags & ~HT_MSI_FLAGS_ENABLE); 2614 } 2615 pos = pci_find_next_ht_capability(dev, pos, 2616 HT_CAPTYPE_MSI_MAPPING); 2617 } 2618 } 2619 2620 static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) 2621 { 2622 struct pci_dev *host_bridge; 2623 int pos; 2624 int found; 2625 2626 if (!pci_msi_enabled()) 2627 return; 2628 2629 /* check if there is HT MSI cap or enabled on this device */ 2630 found = ht_check_msi_mapping(dev); 2631 2632 /* no HT MSI CAP */ 2633 if (found == 0) 2634 return; 2635 2636 /* 2637 * HT MSI mapping should be disabled on devices that are below 2638 * a non-Hypertransport host bridge. Locate the host bridge... 2639 */ 2640 host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); 2641 if (host_bridge == NULL) { 2642 dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); 2643 return; 2644 } 2645 2646 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2647 if (pos != 0) { 2648 /* Host bridge is to HT */ 2649 if (found == 1) { 2650 /* it is not enabled, try to enable it */ 2651 if (all) 2652 ht_enable_msi_mapping(dev); 2653 else 2654 nv_ht_enable_msi_mapping(dev); 2655 } 2656 goto out; 2657 } 2658 2659 /* HT MSI is not enabled */ 2660 if (found == 1) 2661 goto out; 2662 2663 /* Host bridge is not to HT, disable HT MSI mapping on this device */ 2664 ht_disable_msi_mapping(dev); 2665 2666 out: 2667 pci_dev_put(host_bridge); 2668 } 2669 2670 static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) 2671 { 2672 return __nv_msi_ht_cap_quirk(dev, 1); 2673 } 2674 2675 static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) 2676 { 2677 return __nv_msi_ht_cap_quirk(dev, 0); 2678 } 2679 2680 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2681 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2682 2683 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2684 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2685 2686 static void quirk_msi_intx_disable_bug(struct pci_dev *dev) 2687 { 2688 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2689 } 2690 static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) 2691 { 2692 struct pci_dev *p; 2693 2694 /* SB700 MSI issue will be fixed at HW level from revision A21, 2695 * we need check PCI REVISION ID of SMBus controller to get SB700 2696 * revision. 2697 */ 2698 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, 2699 NULL); 2700 if (!p) 2701 return; 2702 2703 if ((p->revision < 0x3B) && (p->revision >= 0x30)) 2704 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2705 pci_dev_put(p); 2706 } 2707 static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) 2708 { 2709 /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ 2710 if (dev->revision < 0x18) { 2711 dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); 2712 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2713 } 2714 } 2715 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2716 PCI_DEVICE_ID_TIGON3_5780, 2717 quirk_msi_intx_disable_bug); 2718 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2719 PCI_DEVICE_ID_TIGON3_5780S, 2720 quirk_msi_intx_disable_bug); 2721 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2722 PCI_DEVICE_ID_TIGON3_5714, 2723 quirk_msi_intx_disable_bug); 2724 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2725 PCI_DEVICE_ID_TIGON3_5714S, 2726 quirk_msi_intx_disable_bug); 2727 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2728 PCI_DEVICE_ID_TIGON3_5715, 2729 quirk_msi_intx_disable_bug); 2730 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2731 PCI_DEVICE_ID_TIGON3_5715S, 2732 quirk_msi_intx_disable_bug); 2733 2734 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, 2735 quirk_msi_intx_disable_ati_bug); 2736 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, 2737 quirk_msi_intx_disable_ati_bug); 2738 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, 2739 quirk_msi_intx_disable_ati_bug); 2740 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, 2741 quirk_msi_intx_disable_ati_bug); 2742 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, 2743 quirk_msi_intx_disable_ati_bug); 2744 2745 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, 2746 quirk_msi_intx_disable_bug); 2747 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, 2748 quirk_msi_intx_disable_bug); 2749 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, 2750 quirk_msi_intx_disable_bug); 2751 2752 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, 2753 quirk_msi_intx_disable_bug); 2754 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, 2755 quirk_msi_intx_disable_bug); 2756 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, 2757 quirk_msi_intx_disable_bug); 2758 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, 2759 quirk_msi_intx_disable_bug); 2760 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, 2761 quirk_msi_intx_disable_bug); 2762 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, 2763 quirk_msi_intx_disable_bug); 2764 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, 2765 quirk_msi_intx_disable_qca_bug); 2766 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, 2767 quirk_msi_intx_disable_qca_bug); 2768 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, 2769 quirk_msi_intx_disable_qca_bug); 2770 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, 2771 quirk_msi_intx_disable_qca_bug); 2772 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, 2773 quirk_msi_intx_disable_qca_bug); 2774 #endif /* CONFIG_PCI_MSI */ 2775 2776 /* Allow manual resource allocation for PCI hotplug bridges 2777 * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For 2778 * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), 2779 * kernel fails to allocate resources when hotplug device is 2780 * inserted and PCI bus is rescanned. 2781 */ 2782 static void quirk_hotplug_bridge(struct pci_dev *dev) 2783 { 2784 dev->is_hotplug_bridge = 1; 2785 } 2786 2787 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); 2788 2789 /* 2790 * This is a quirk for the Ricoh MMC controller found as a part of 2791 * some mulifunction chips. 2792 2793 * This is very similar and based on the ricoh_mmc driver written by 2794 * Philip Langdale. Thank you for these magic sequences. 2795 * 2796 * These chips implement the four main memory card controllers (SD, MMC, MS, xD) 2797 * and one or both of cardbus or firewire. 2798 * 2799 * It happens that they implement SD and MMC 2800 * support as separate controllers (and PCI functions). The linux SDHCI 2801 * driver supports MMC cards but the chip detects MMC cards in hardware 2802 * and directs them to the MMC controller - so the SDHCI driver never sees 2803 * them. 2804 * 2805 * To get around this, we must disable the useless MMC controller. 2806 * At that point, the SDHCI controller will start seeing them 2807 * It seems to be the case that the relevant PCI registers to deactivate the 2808 * MMC controller live on PCI function 0, which might be the cardbus controller 2809 * or the firewire controller, depending on the particular chip in question 2810 * 2811 * This has to be done early, because as soon as we disable the MMC controller 2812 * other pci functions shift up one level, e.g. function #2 becomes function 2813 * #1, and this will confuse the pci core. 2814 */ 2815 2816 #ifdef CONFIG_MMC_RICOH_MMC 2817 static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) 2818 { 2819 /* disable via cardbus interface */ 2820 u8 write_enable; 2821 u8 write_target; 2822 u8 disable; 2823 2824 /* disable must be done via function #0 */ 2825 if (PCI_FUNC(dev->devfn)) 2826 return; 2827 2828 pci_read_config_byte(dev, 0xB7, &disable); 2829 if (disable & 0x02) 2830 return; 2831 2832 pci_read_config_byte(dev, 0x8E, &write_enable); 2833 pci_write_config_byte(dev, 0x8E, 0xAA); 2834 pci_read_config_byte(dev, 0x8D, &write_target); 2835 pci_write_config_byte(dev, 0x8D, 0xB7); 2836 pci_write_config_byte(dev, 0xB7, disable | 0x02); 2837 pci_write_config_byte(dev, 0x8E, write_enable); 2838 pci_write_config_byte(dev, 0x8D, write_target); 2839 2840 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); 2841 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2842 } 2843 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2844 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2845 2846 static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) 2847 { 2848 /* disable via firewire interface */ 2849 u8 write_enable; 2850 u8 disable; 2851 2852 /* disable must be done via function #0 */ 2853 if (PCI_FUNC(dev->devfn)) 2854 return; 2855 /* 2856 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize 2857 * certain types of SD/MMC cards. Lowering the SD base 2858 * clock frequency from 200Mhz to 50Mhz fixes this issue. 2859 * 2860 * 0x150 - SD2.0 mode enable for changing base clock 2861 * frequency to 50Mhz 2862 * 0xe1 - Base clock frequency 2863 * 0x32 - 50Mhz new clock frequency 2864 * 0xf9 - Key register for 0x150 2865 * 0xfc - key register for 0xe1 2866 */ 2867 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || 2868 dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { 2869 pci_write_config_byte(dev, 0xf9, 0xfc); 2870 pci_write_config_byte(dev, 0x150, 0x10); 2871 pci_write_config_byte(dev, 0xf9, 0x00); 2872 pci_write_config_byte(dev, 0xfc, 0x01); 2873 pci_write_config_byte(dev, 0xe1, 0x32); 2874 pci_write_config_byte(dev, 0xfc, 0x00); 2875 2876 dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); 2877 } 2878 2879 pci_read_config_byte(dev, 0xCB, &disable); 2880 2881 if (disable & 0x02) 2882 return; 2883 2884 pci_read_config_byte(dev, 0xCA, &write_enable); 2885 pci_write_config_byte(dev, 0xCA, 0x57); 2886 pci_write_config_byte(dev, 0xCB, disable | 0x02); 2887 pci_write_config_byte(dev, 0xCA, write_enable); 2888 2889 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); 2890 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2891 2892 } 2893 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2894 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2895 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2896 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2897 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2898 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2899 #endif /*CONFIG_MMC_RICOH_MMC*/ 2900 2901 #ifdef CONFIG_DMAR_TABLE 2902 #define VTUNCERRMSK_REG 0x1ac 2903 #define VTD_MSK_SPEC_ERRORS (1 << 31) 2904 /* 2905 * This is a quirk for masking vt-d spec defined errors to platform error 2906 * handling logic. With out this, platforms using Intel 7500, 5500 chipsets 2907 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based 2908 * on the RAS config settings of the platform) when a vt-d fault happens. 2909 * The resulting SMI caused the system to hang. 2910 * 2911 * VT-d spec related errors are already handled by the VT-d OS code, so no 2912 * need to report the same error through other channels. 2913 */ 2914 static void vtd_mask_spec_errors(struct pci_dev *dev) 2915 { 2916 u32 word; 2917 2918 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); 2919 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); 2920 } 2921 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); 2922 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); 2923 #endif 2924 2925 static void fixup_ti816x_class(struct pci_dev *dev) 2926 { 2927 u32 class = dev->class; 2928 2929 /* TI 816x devices do not have class code set when in PCIe boot mode */ 2930 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; 2931 dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n", 2932 class, dev->class); 2933 } 2934 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, 2935 PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); 2936 2937 /* Some PCIe devices do not work reliably with the claimed maximum 2938 * payload size supported. 2939 */ 2940 static void fixup_mpss_256(struct pci_dev *dev) 2941 { 2942 dev->pcie_mpss = 1; /* 256 bytes */ 2943 } 2944 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2945 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); 2946 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2947 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); 2948 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2949 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); 2950 2951 /* Intel 5000 and 5100 Memory controllers have an errata with read completion 2952 * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. 2953 * Since there is no way of knowing what the PCIE MPS on each fabric will be 2954 * until all of the devices are discovered and buses walked, read completion 2955 * coalescing must be disabled. Unfortunately, it cannot be re-enabled because 2956 * it is possible to hotplug a device with MPS of 256B. 2957 */ 2958 static void quirk_intel_mc_errata(struct pci_dev *dev) 2959 { 2960 int err; 2961 u16 rcc; 2962 2963 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 2964 pcie_bus_config == PCIE_BUS_DEFAULT) 2965 return; 2966 2967 /* Intel errata specifies bits to change but does not say what they are. 2968 * Keeping them magical until such time as the registers and values can 2969 * be explained. 2970 */ 2971 err = pci_read_config_word(dev, 0x48, &rcc); 2972 if (err) { 2973 dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); 2974 return; 2975 } 2976 2977 if (!(rcc & (1 << 10))) 2978 return; 2979 2980 rcc &= ~(1 << 10); 2981 2982 err = pci_write_config_word(dev, 0x48, rcc); 2983 if (err) { 2984 dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); 2985 return; 2986 } 2987 2988 pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); 2989 } 2990 /* Intel 5000 series memory controllers and ports 2-7 */ 2991 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); 2992 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); 2993 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); 2994 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); 2995 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); 2996 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); 2997 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); 2998 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); 2999 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); 3000 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); 3001 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); 3002 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); 3003 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); 3004 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); 3005 /* Intel 5100 series memory controllers and ports 2-7 */ 3006 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); 3007 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); 3008 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); 3009 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); 3010 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); 3011 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); 3012 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); 3013 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); 3014 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); 3015 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); 3016 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); 3017 3018 3019 /* 3020 * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To 3021 * work around this, query the size it should be configured to by the device and 3022 * modify the resource end to correspond to this new size. 3023 */ 3024 static void quirk_intel_ntb(struct pci_dev *dev) 3025 { 3026 int rc; 3027 u8 val; 3028 3029 rc = pci_read_config_byte(dev, 0x00D0, &val); 3030 if (rc) 3031 return; 3032 3033 dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; 3034 3035 rc = pci_read_config_byte(dev, 0x00D1, &val); 3036 if (rc) 3037 return; 3038 3039 dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; 3040 } 3041 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); 3042 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); 3043 3044 static ktime_t fixup_debug_start(struct pci_dev *dev, 3045 void (*fn)(struct pci_dev *dev)) 3046 { 3047 ktime_t calltime = 0; 3048 3049 dev_dbg(&dev->dev, "calling %pF\n", fn); 3050 if (initcall_debug) { 3051 pr_debug("calling %pF @ %i for %s\n", 3052 fn, task_pid_nr(current), dev_name(&dev->dev)); 3053 calltime = ktime_get(); 3054 } 3055 3056 return calltime; 3057 } 3058 3059 static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, 3060 void (*fn)(struct pci_dev *dev)) 3061 { 3062 ktime_t delta, rettime; 3063 unsigned long long duration; 3064 3065 if (initcall_debug) { 3066 rettime = ktime_get(); 3067 delta = ktime_sub(rettime, calltime); 3068 duration = (unsigned long long) ktime_to_ns(delta) >> 10; 3069 pr_debug("pci fixup %pF returned after %lld usecs for %s\n", 3070 fn, duration, dev_name(&dev->dev)); 3071 } 3072 } 3073 3074 /* 3075 * Some BIOS implementations leave the Intel GPU interrupts enabled, 3076 * even though no one is handling them (f.e. i915 driver is never loaded). 3077 * Additionally the interrupt destination is not set up properly 3078 * and the interrupt ends up -somewhere-. 3079 * 3080 * These spurious interrupts are "sticky" and the kernel disables 3081 * the (shared) interrupt line after 100.000+ generated interrupts. 3082 * 3083 * Fix it by disabling the still enabled interrupts. 3084 * This resolves crashes often seen on monitor unplug. 3085 */ 3086 #define I915_DEIER_REG 0x4400c 3087 static void disable_igfx_irq(struct pci_dev *dev) 3088 { 3089 void __iomem *regs = pci_iomap(dev, 0, 0); 3090 if (regs == NULL) { 3091 dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); 3092 return; 3093 } 3094 3095 /* Check if any interrupt line is still enabled */ 3096 if (readl(regs + I915_DEIER_REG) != 0) { 3097 dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); 3098 3099 writel(0, regs + I915_DEIER_REG); 3100 } 3101 3102 pci_iounmap(dev, regs); 3103 } 3104 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); 3105 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); 3106 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); 3107 3108 /* 3109 * PCI devices which are on Intel chips can skip the 10ms delay 3110 * before entering D3 mode. 3111 */ 3112 static void quirk_remove_d3_delay(struct pci_dev *dev) 3113 { 3114 dev->d3_delay = 0; 3115 } 3116 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); 3117 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); 3118 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); 3119 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); 3120 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); 3121 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); 3122 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); 3123 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); 3124 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); 3125 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); 3126 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); 3127 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); 3128 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); 3129 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); 3130 /* Intel Cherrytrail devices do not need 10ms d3_delay */ 3131 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); 3132 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); 3133 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); 3134 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); 3135 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); 3136 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); 3137 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); 3138 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); 3139 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); 3140 3141 /* 3142 * Some devices may pass our check in pci_intx_mask_supported() if 3143 * PCI_COMMAND_INTX_DISABLE works though they actually do not properly 3144 * support this feature. 3145 */ 3146 static void quirk_broken_intx_masking(struct pci_dev *dev) 3147 { 3148 dev->broken_intx_masking = 1; 3149 } 3150 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030, 3151 quirk_broken_intx_masking); 3152 DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ 3153 quirk_broken_intx_masking); 3154 3155 /* 3156 * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) 3157 * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC 3158 * 3159 * RTL8110SC - Fails under PCI device assignment using DisINTx masking. 3160 */ 3161 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169, 3162 quirk_broken_intx_masking); 3163 3164 /* 3165 * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking, 3166 * DisINTx can be set but the interrupt status bit is non-functional. 3167 */ 3168 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, 3169 quirk_broken_intx_masking); 3170 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, 3171 quirk_broken_intx_masking); 3172 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, 3173 quirk_broken_intx_masking); 3174 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, 3175 quirk_broken_intx_masking); 3176 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, 3177 quirk_broken_intx_masking); 3178 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, 3179 quirk_broken_intx_masking); 3180 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, 3181 quirk_broken_intx_masking); 3182 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, 3183 quirk_broken_intx_masking); 3184 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, 3185 quirk_broken_intx_masking); 3186 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, 3187 quirk_broken_intx_masking); 3188 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, 3189 quirk_broken_intx_masking); 3190 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, 3191 quirk_broken_intx_masking); 3192 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, 3193 quirk_broken_intx_masking); 3194 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, 3195 quirk_broken_intx_masking); 3196 3197 static u16 mellanox_broken_intx_devs[] = { 3198 PCI_DEVICE_ID_MELLANOX_HERMON_SDR, 3199 PCI_DEVICE_ID_MELLANOX_HERMON_DDR, 3200 PCI_DEVICE_ID_MELLANOX_HERMON_QDR, 3201 PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2, 3202 PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2, 3203 PCI_DEVICE_ID_MELLANOX_HERMON_EN, 3204 PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2, 3205 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN, 3206 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2, 3207 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2, 3208 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2, 3209 PCI_DEVICE_ID_MELLANOX_CONNECTX2, 3210 PCI_DEVICE_ID_MELLANOX_CONNECTX3, 3211 PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO, 3212 }; 3213 3214 #define CONNECTX_4_CURR_MAX_MINOR 99 3215 #define CONNECTX_4_INTX_SUPPORT_MINOR 14 3216 3217 /* 3218 * Check ConnectX-4/LX FW version to see if it supports legacy interrupts. 3219 * If so, don't mark it as broken. 3220 * FW minor > 99 means older FW version format and no INTx masking support. 3221 * FW minor < 14 means new FW version format and no INTx masking support. 3222 */ 3223 static void mellanox_check_broken_intx_masking(struct pci_dev *pdev) 3224 { 3225 __be32 __iomem *fw_ver; 3226 u16 fw_major; 3227 u16 fw_minor; 3228 u16 fw_subminor; 3229 u32 fw_maj_min; 3230 u32 fw_sub_min; 3231 int i; 3232 3233 for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) { 3234 if (pdev->device == mellanox_broken_intx_devs[i]) { 3235 pdev->broken_intx_masking = 1; 3236 return; 3237 } 3238 } 3239 3240 /* Getting here means Connect-IB cards and up. Connect-IB has no INTx 3241 * support so shouldn't be checked further 3242 */ 3243 if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB) 3244 return; 3245 3246 if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 && 3247 pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX) 3248 return; 3249 3250 /* For ConnectX-4 and ConnectX-4LX, need to check FW support */ 3251 if (pci_enable_device_mem(pdev)) { 3252 dev_warn(&pdev->dev, "Can't enable device memory\n"); 3253 return; 3254 } 3255 3256 fw_ver = ioremap(pci_resource_start(pdev, 0), 4); 3257 if (!fw_ver) { 3258 dev_warn(&pdev->dev, "Can't map ConnectX-4 initialization segment\n"); 3259 goto out; 3260 } 3261 3262 /* Reading from resource space should be 32b aligned */ 3263 fw_maj_min = ioread32be(fw_ver); 3264 fw_sub_min = ioread32be(fw_ver + 1); 3265 fw_major = fw_maj_min & 0xffff; 3266 fw_minor = fw_maj_min >> 16; 3267 fw_subminor = fw_sub_min & 0xffff; 3268 if (fw_minor > CONNECTX_4_CURR_MAX_MINOR || 3269 fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) { 3270 dev_warn(&pdev->dev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n", 3271 fw_major, fw_minor, fw_subminor, pdev->device == 3272 PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14); 3273 pdev->broken_intx_masking = 1; 3274 } 3275 3276 iounmap(fw_ver); 3277 3278 out: 3279 pci_disable_device(pdev); 3280 } 3281 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, 3282 mellanox_check_broken_intx_masking); 3283 3284 static void quirk_no_bus_reset(struct pci_dev *dev) 3285 { 3286 dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; 3287 } 3288 3289 /* 3290 * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset. 3291 * The device will throw a Link Down error on AER-capable systems and 3292 * regardless of AER, config space of the device is never accessible again 3293 * and typically causes the system to hang or reset when access is attempted. 3294 * http://www.spinics.net/lists/linux-pci/msg34797.html 3295 */ 3296 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); 3297 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); 3298 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); 3299 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset); 3300 3301 static void quirk_no_pm_reset(struct pci_dev *dev) 3302 { 3303 /* 3304 * We can't do a bus reset on root bus devices, but an ineffective 3305 * PM reset may be better than nothing. 3306 */ 3307 if (!pci_is_root_bus(dev->bus)) 3308 dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; 3309 } 3310 3311 /* 3312 * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition 3313 * causes a reset (i.e., they advertise NoSoftRst-). This transition seems 3314 * to have no effect on the device: it retains the framebuffer contents and 3315 * monitor sync. Advertising this support makes other layers, like VFIO, 3316 * assume pci_reset_function() is viable for this device. Mark it as 3317 * unavailable to skip it when testing reset methods. 3318 */ 3319 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 3320 PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); 3321 3322 /* 3323 * Thunderbolt controllers with broken MSI hotplug signaling: 3324 * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part 3325 * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge). 3326 */ 3327 static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev) 3328 { 3329 if (pdev->is_hotplug_bridge && 3330 (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C || 3331 pdev->revision <= 1)) 3332 pdev->no_msi = 1; 3333 } 3334 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3335 quirk_thunderbolt_hotplug_msi); 3336 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE, 3337 quirk_thunderbolt_hotplug_msi); 3338 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK, 3339 quirk_thunderbolt_hotplug_msi); 3340 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3341 quirk_thunderbolt_hotplug_msi); 3342 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, 3343 quirk_thunderbolt_hotplug_msi); 3344 3345 static void quirk_chelsio_extend_vpd(struct pci_dev *dev) 3346 { 3347 pci_set_vpd_size(dev, 8192); 3348 } 3349 3350 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd); 3351 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd); 3352 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd); 3353 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd); 3354 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd); 3355 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd); 3356 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd); 3357 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd); 3358 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd); 3359 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd); 3360 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd); 3361 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd); 3362 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd); 3363 3364 #ifdef CONFIG_ACPI 3365 /* 3366 * Apple: Shutdown Cactus Ridge Thunderbolt controller. 3367 * 3368 * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be 3369 * shutdown before suspend. Otherwise the native host interface (NHI) will not 3370 * be present after resume if a device was plugged in before suspend. 3371 * 3372 * The thunderbolt controller consists of a pcie switch with downstream 3373 * bridges leading to the NHI and to the tunnel pci bridges. 3374 * 3375 * This quirk cuts power to the whole chip. Therefore we have to apply it 3376 * during suspend_noirq of the upstream bridge. 3377 * 3378 * Power is automagically restored before resume. No action is needed. 3379 */ 3380 static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) 3381 { 3382 acpi_handle bridge, SXIO, SXFP, SXLV; 3383 3384 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3385 return; 3386 if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) 3387 return; 3388 bridge = ACPI_HANDLE(&dev->dev); 3389 if (!bridge) 3390 return; 3391 /* 3392 * SXIO and SXLV are present only on machines requiring this quirk. 3393 * TB bridges in external devices might have the same device id as those 3394 * on the host, but they will not have the associated ACPI methods. This 3395 * implicitly checks that we are at the right bridge. 3396 */ 3397 if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) 3398 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) 3399 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) 3400 return; 3401 dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); 3402 3403 /* magic sequence */ 3404 acpi_execute_simple_method(SXIO, NULL, 1); 3405 acpi_execute_simple_method(SXFP, NULL, 0); 3406 msleep(300); 3407 acpi_execute_simple_method(SXLV, NULL, 0); 3408 acpi_execute_simple_method(SXIO, NULL, 0); 3409 acpi_execute_simple_method(SXLV, NULL, 0); 3410 } 3411 DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 3412 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3413 quirk_apple_poweroff_thunderbolt); 3414 3415 /* 3416 * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. 3417 * 3418 * During suspend the thunderbolt controller is reset and all pci 3419 * tunnels are lost. The NHI driver will try to reestablish all tunnels 3420 * during resume. We have to manually wait for the NHI since there is 3421 * no parent child relationship between the NHI and the tunneled 3422 * bridges. 3423 */ 3424 static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) 3425 { 3426 struct pci_dev *sibling = NULL; 3427 struct pci_dev *nhi = NULL; 3428 3429 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3430 return; 3431 if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) 3432 return; 3433 /* 3434 * Find the NHI and confirm that we are a bridge on the tb host 3435 * controller and not on a tb endpoint. 3436 */ 3437 sibling = pci_get_slot(dev->bus, 0x0); 3438 if (sibling == dev) 3439 goto out; /* we are the downstream bridge to the NHI */ 3440 if (!sibling || !sibling->subordinate) 3441 goto out; 3442 nhi = pci_get_slot(sibling->subordinate, 0x0); 3443 if (!nhi) 3444 goto out; 3445 if (nhi->vendor != PCI_VENDOR_ID_INTEL 3446 || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && 3447 nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && 3448 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && 3449 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) 3450 || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) 3451 goto out; 3452 dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); 3453 device_pm_wait_for_dev(&dev->dev, &nhi->dev); 3454 out: 3455 pci_dev_put(nhi); 3456 pci_dev_put(sibling); 3457 } 3458 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3459 PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3460 quirk_apple_wait_for_thunderbolt); 3461 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3462 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3463 quirk_apple_wait_for_thunderbolt); 3464 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3465 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, 3466 quirk_apple_wait_for_thunderbolt); 3467 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3468 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, 3469 quirk_apple_wait_for_thunderbolt); 3470 #endif 3471 3472 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, 3473 struct pci_fixup *end) 3474 { 3475 ktime_t calltime; 3476 3477 for (; f < end; f++) 3478 if ((f->class == (u32) (dev->class >> f->class_shift) || 3479 f->class == (u32) PCI_ANY_ID) && 3480 (f->vendor == dev->vendor || 3481 f->vendor == (u16) PCI_ANY_ID) && 3482 (f->device == dev->device || 3483 f->device == (u16) PCI_ANY_ID)) { 3484 calltime = fixup_debug_start(dev, f->hook); 3485 f->hook(dev); 3486 fixup_debug_report(dev, calltime, f->hook); 3487 } 3488 } 3489 3490 extern struct pci_fixup __start_pci_fixups_early[]; 3491 extern struct pci_fixup __end_pci_fixups_early[]; 3492 extern struct pci_fixup __start_pci_fixups_header[]; 3493 extern struct pci_fixup __end_pci_fixups_header[]; 3494 extern struct pci_fixup __start_pci_fixups_final[]; 3495 extern struct pci_fixup __end_pci_fixups_final[]; 3496 extern struct pci_fixup __start_pci_fixups_enable[]; 3497 extern struct pci_fixup __end_pci_fixups_enable[]; 3498 extern struct pci_fixup __start_pci_fixups_resume[]; 3499 extern struct pci_fixup __end_pci_fixups_resume[]; 3500 extern struct pci_fixup __start_pci_fixups_resume_early[]; 3501 extern struct pci_fixup __end_pci_fixups_resume_early[]; 3502 extern struct pci_fixup __start_pci_fixups_suspend[]; 3503 extern struct pci_fixup __end_pci_fixups_suspend[]; 3504 extern struct pci_fixup __start_pci_fixups_suspend_late[]; 3505 extern struct pci_fixup __end_pci_fixups_suspend_late[]; 3506 3507 static bool pci_apply_fixup_final_quirks; 3508 3509 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) 3510 { 3511 struct pci_fixup *start, *end; 3512 3513 switch (pass) { 3514 case pci_fixup_early: 3515 start = __start_pci_fixups_early; 3516 end = __end_pci_fixups_early; 3517 break; 3518 3519 case pci_fixup_header: 3520 start = __start_pci_fixups_header; 3521 end = __end_pci_fixups_header; 3522 break; 3523 3524 case pci_fixup_final: 3525 if (!pci_apply_fixup_final_quirks) 3526 return; 3527 start = __start_pci_fixups_final; 3528 end = __end_pci_fixups_final; 3529 break; 3530 3531 case pci_fixup_enable: 3532 start = __start_pci_fixups_enable; 3533 end = __end_pci_fixups_enable; 3534 break; 3535 3536 case pci_fixup_resume: 3537 start = __start_pci_fixups_resume; 3538 end = __end_pci_fixups_resume; 3539 break; 3540 3541 case pci_fixup_resume_early: 3542 start = __start_pci_fixups_resume_early; 3543 end = __end_pci_fixups_resume_early; 3544 break; 3545 3546 case pci_fixup_suspend: 3547 start = __start_pci_fixups_suspend; 3548 end = __end_pci_fixups_suspend; 3549 break; 3550 3551 case pci_fixup_suspend_late: 3552 start = __start_pci_fixups_suspend_late; 3553 end = __end_pci_fixups_suspend_late; 3554 break; 3555 3556 default: 3557 /* stupid compiler warning, you would think with an enum... */ 3558 return; 3559 } 3560 pci_do_fixups(dev, start, end); 3561 } 3562 EXPORT_SYMBOL(pci_fixup_device); 3563 3564 3565 static int __init pci_apply_final_quirks(void) 3566 { 3567 struct pci_dev *dev = NULL; 3568 u8 cls = 0; 3569 u8 tmp; 3570 3571 if (pci_cache_line_size) 3572 printk(KERN_DEBUG "PCI: CLS %u bytes\n", 3573 pci_cache_line_size << 2); 3574 3575 pci_apply_fixup_final_quirks = true; 3576 for_each_pci_dev(dev) { 3577 pci_fixup_device(pci_fixup_final, dev); 3578 /* 3579 * If arch hasn't set it explicitly yet, use the CLS 3580 * value shared by all PCI devices. If there's a 3581 * mismatch, fall back to the default value. 3582 */ 3583 if (!pci_cache_line_size) { 3584 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); 3585 if (!cls) 3586 cls = tmp; 3587 if (!tmp || cls == tmp) 3588 continue; 3589 3590 printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", 3591 cls << 2, tmp << 2, 3592 pci_dfl_cache_line_size << 2); 3593 pci_cache_line_size = pci_dfl_cache_line_size; 3594 } 3595 } 3596 3597 if (!pci_cache_line_size) { 3598 printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", 3599 cls << 2, pci_dfl_cache_line_size << 2); 3600 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; 3601 } 3602 3603 return 0; 3604 } 3605 3606 fs_initcall_sync(pci_apply_final_quirks); 3607 3608 /* 3609 * Followings are device-specific reset methods which can be used to 3610 * reset a single function if other methods (e.g. FLR, PM D0->D3) are 3611 * not available. 3612 */ 3613 static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) 3614 { 3615 /* 3616 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf 3617 * 3618 * The 82599 supports FLR on VFs, but FLR support is reported only 3619 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). 3620 * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. 3621 */ 3622 3623 if (probe) 3624 return 0; 3625 3626 if (!pci_wait_for_pending_transaction(dev)) 3627 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3628 3629 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3630 3631 msleep(100); 3632 3633 return 0; 3634 } 3635 3636 #define SOUTH_CHICKEN2 0xc2004 3637 #define PCH_PP_STATUS 0xc7200 3638 #define PCH_PP_CONTROL 0xc7204 3639 #define MSG_CTL 0x45010 3640 #define NSDE_PWR_STATE 0xd0100 3641 #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ 3642 3643 static int reset_ivb_igd(struct pci_dev *dev, int probe) 3644 { 3645 void __iomem *mmio_base; 3646 unsigned long timeout; 3647 u32 val; 3648 3649 if (probe) 3650 return 0; 3651 3652 mmio_base = pci_iomap(dev, 0, 0); 3653 if (!mmio_base) 3654 return -ENOMEM; 3655 3656 iowrite32(0x00000002, mmio_base + MSG_CTL); 3657 3658 /* 3659 * Clobbering SOUTH_CHICKEN2 register is fine only if the next 3660 * driver loaded sets the right bits. However, this's a reset and 3661 * the bits have been set by i915 previously, so we clobber 3662 * SOUTH_CHICKEN2 register directly here. 3663 */ 3664 iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); 3665 3666 val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; 3667 iowrite32(val, mmio_base + PCH_PP_CONTROL); 3668 3669 timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); 3670 do { 3671 val = ioread32(mmio_base + PCH_PP_STATUS); 3672 if ((val & 0xb0000000) == 0) 3673 goto reset_complete; 3674 msleep(10); 3675 } while (time_before(jiffies, timeout)); 3676 dev_warn(&dev->dev, "timeout during reset\n"); 3677 3678 reset_complete: 3679 iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); 3680 3681 pci_iounmap(dev, mmio_base); 3682 return 0; 3683 } 3684 3685 /* 3686 * Device-specific reset method for Chelsio T4-based adapters. 3687 */ 3688 static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) 3689 { 3690 u16 old_command; 3691 u16 msix_flags; 3692 3693 /* 3694 * If this isn't a Chelsio T4-based device, return -ENOTTY indicating 3695 * that we have no device-specific reset method. 3696 */ 3697 if ((dev->device & 0xf000) != 0x4000) 3698 return -ENOTTY; 3699 3700 /* 3701 * If this is the "probe" phase, return 0 indicating that we can 3702 * reset this device. 3703 */ 3704 if (probe) 3705 return 0; 3706 3707 /* 3708 * T4 can wedge if there are DMAs in flight within the chip and Bus 3709 * Master has been disabled. We need to have it on till the Function 3710 * Level Reset completes. (BUS_MASTER is disabled in 3711 * pci_reset_function()). 3712 */ 3713 pci_read_config_word(dev, PCI_COMMAND, &old_command); 3714 pci_write_config_word(dev, PCI_COMMAND, 3715 old_command | PCI_COMMAND_MASTER); 3716 3717 /* 3718 * Perform the actual device function reset, saving and restoring 3719 * configuration information around the reset. 3720 */ 3721 pci_save_state(dev); 3722 3723 /* 3724 * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts 3725 * are disabled when an MSI-X interrupt message needs to be delivered. 3726 * So we briefly re-enable MSI-X interrupts for the duration of the 3727 * FLR. The pci_restore_state() below will restore the original 3728 * MSI-X state. 3729 */ 3730 pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); 3731 if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) 3732 pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, 3733 msix_flags | 3734 PCI_MSIX_FLAGS_ENABLE | 3735 PCI_MSIX_FLAGS_MASKALL); 3736 3737 /* 3738 * Start of pcie_flr() code sequence. This reset code is a copy of 3739 * the guts of pcie_flr() because that's not an exported function. 3740 */ 3741 3742 if (!pci_wait_for_pending_transaction(dev)) 3743 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3744 3745 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3746 msleep(100); 3747 3748 /* 3749 * End of pcie_flr() code sequence. 3750 */ 3751 3752 /* 3753 * Restore the configuration information (BAR values, etc.) including 3754 * the original PCI Configuration Space Command word, and return 3755 * success. 3756 */ 3757 pci_restore_state(dev); 3758 pci_write_config_word(dev, PCI_COMMAND, old_command); 3759 return 0; 3760 } 3761 3762 #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed 3763 #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 3764 #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 3765 3766 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { 3767 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, 3768 reset_intel_82599_sfp_virtfn }, 3769 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, 3770 reset_ivb_igd }, 3771 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, 3772 reset_ivb_igd }, 3773 { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 3774 reset_chelsio_generic_dev }, 3775 { 0 } 3776 }; 3777 3778 /* 3779 * These device-specific reset methods are here rather than in a driver 3780 * because when a host assigns a device to a guest VM, the host may need 3781 * to reset the device but probably doesn't have a driver for it. 3782 */ 3783 int pci_dev_specific_reset(struct pci_dev *dev, int probe) 3784 { 3785 const struct pci_dev_reset_methods *i; 3786 3787 for (i = pci_dev_reset_methods; i->reset; i++) { 3788 if ((i->vendor == dev->vendor || 3789 i->vendor == (u16)PCI_ANY_ID) && 3790 (i->device == dev->device || 3791 i->device == (u16)PCI_ANY_ID)) 3792 return i->reset(dev, probe); 3793 } 3794 3795 return -ENOTTY; 3796 } 3797 3798 static void quirk_dma_func0_alias(struct pci_dev *dev) 3799 { 3800 if (PCI_FUNC(dev->devfn) != 0) 3801 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); 3802 } 3803 3804 /* 3805 * https://bugzilla.redhat.com/show_bug.cgi?id=605888 3806 * 3807 * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. 3808 */ 3809 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); 3810 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); 3811 3812 static void quirk_dma_func1_alias(struct pci_dev *dev) 3813 { 3814 if (PCI_FUNC(dev->devfn) != 1) 3815 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1)); 3816 } 3817 3818 /* 3819 * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some 3820 * SKUs function 1 is present and is a legacy IDE controller, in other 3821 * SKUs this function is not present, making this a ghost requester. 3822 * https://bugzilla.kernel.org/show_bug.cgi?id=42679 3823 */ 3824 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, 3825 quirk_dma_func1_alias); 3826 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, 3827 quirk_dma_func1_alias); 3828 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ 3829 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, 3830 quirk_dma_func1_alias); 3831 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ 3832 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, 3833 quirk_dma_func1_alias); 3834 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ 3835 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, 3836 quirk_dma_func1_alias); 3837 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */ 3838 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, 3839 quirk_dma_func1_alias); 3840 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ 3841 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, 3842 quirk_dma_func1_alias); 3843 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ 3844 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, 3845 quirk_dma_func1_alias); 3846 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, 3847 quirk_dma_func1_alias); 3848 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ 3849 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, 3850 PCI_DEVICE_ID_JMICRON_JMB388_ESD, 3851 quirk_dma_func1_alias); 3852 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */ 3853 DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */ 3854 0x0122, /* Plextor M6E (Marvell 88SS9183)*/ 3855 quirk_dma_func1_alias); 3856 3857 /* 3858 * Some devices DMA with the wrong devfn, not just the wrong function. 3859 * quirk_fixed_dma_alias() uses this table to create fixed aliases, where 3860 * the alias is "fixed" and independent of the device devfn. 3861 * 3862 * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O 3863 * processor. To software, this appears as a PCIe-to-PCI/X bridge with a 3864 * single device on the secondary bus. In reality, the single exposed 3865 * device at 0e.0 is the Address Translation Unit (ATU) of the controller 3866 * that provides a bridge to the internal bus of the I/O processor. The 3867 * controller supports private devices, which can be hidden from PCI config 3868 * space. In the case of the Adaptec 3405, a private device at 01.0 3869 * appears to be the DMA engine, which therefore needs to become a DMA 3870 * alias for the device. 3871 */ 3872 static const struct pci_device_id fixed_dma_alias_tbl[] = { 3873 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 3874 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ 3875 .driver_data = PCI_DEVFN(1, 0) }, 3876 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 3877 PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */ 3878 .driver_data = PCI_DEVFN(1, 0) }, 3879 { 0 } 3880 }; 3881 3882 static void quirk_fixed_dma_alias(struct pci_dev *dev) 3883 { 3884 const struct pci_device_id *id; 3885 3886 id = pci_match_id(fixed_dma_alias_tbl, dev); 3887 if (id) 3888 pci_add_dma_alias(dev, id->driver_data); 3889 } 3890 3891 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); 3892 3893 /* 3894 * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in 3895 * using the wrong DMA alias for the device. Some of these devices can be 3896 * used as either forward or reverse bridges, so we need to test whether the 3897 * device is operating in the correct mode. We could probably apply this 3898 * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test 3899 * is for a non-root, non-PCIe bridge where the upstream device is PCIe and 3900 * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. 3901 */ 3902 static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) 3903 { 3904 if (!pci_is_root_bus(pdev->bus) && 3905 pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && 3906 !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && 3907 pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) 3908 pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; 3909 } 3910 /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ 3911 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, 3912 quirk_use_pcie_bridge_dma_alias); 3913 /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ 3914 DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); 3915 /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ 3916 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); 3917 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ 3918 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); 3919 3920 /* 3921 * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to 3922 * be added as aliases to the DMA device in order to allow buffer access 3923 * when IOMMU is enabled. Following devfns have to match RIT-LUT table 3924 * programmed in the EEPROM. 3925 */ 3926 static void quirk_mic_x200_dma_alias(struct pci_dev *pdev) 3927 { 3928 pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0)); 3929 pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0)); 3930 pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3)); 3931 } 3932 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias); 3933 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias); 3934 3935 /* 3936 * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) 3937 * class code. Fix it. 3938 */ 3939 static void quirk_tw686x_class(struct pci_dev *pdev) 3940 { 3941 u32 class = pdev->class; 3942 3943 /* Use "Multimedia controller" class */ 3944 pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; 3945 dev_info(&pdev->dev, "TW686x PCI class overridden (%#08x -> %#08x)\n", 3946 class, pdev->class); 3947 } 3948 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, 3949 quirk_tw686x_class); 3950 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, 3951 quirk_tw686x_class); 3952 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, 3953 quirk_tw686x_class); 3954 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, 3955 quirk_tw686x_class); 3956 3957 /* 3958 * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same 3959 * values for the Attribute as were supplied in the header of the 3960 * corresponding Request, except as explicitly allowed when IDO is used." 3961 * 3962 * If a non-compliant device generates a completion with a different 3963 * attribute than the request, the receiver may accept it (which itself 3964 * seems non-compliant based on sec 2.3.2), or it may handle it as a 3965 * Malformed TLP or an Unexpected Completion, which will probably lead to a 3966 * device access timeout. 3967 * 3968 * If the non-compliant device generates completions with zero attributes 3969 * (instead of copying the attributes from the request), we can work around 3970 * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in 3971 * upstream devices so they always generate requests with zero attributes. 3972 * 3973 * This affects other devices under the same Root Port, but since these 3974 * attributes are performance hints, there should be no functional problem. 3975 * 3976 * Note that Configuration Space accesses are never supposed to have TLP 3977 * Attributes, so we're safe waiting till after any Configuration Space 3978 * accesses to do the Root Port fixup. 3979 */ 3980 static void quirk_disable_root_port_attributes(struct pci_dev *pdev) 3981 { 3982 struct pci_dev *root_port = pci_find_pcie_root_port(pdev); 3983 3984 if (!root_port) { 3985 dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); 3986 return; 3987 } 3988 3989 dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", 3990 dev_name(&pdev->dev)); 3991 pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, 3992 PCI_EXP_DEVCTL_RELAX_EN | 3993 PCI_EXP_DEVCTL_NOSNOOP_EN, 0); 3994 } 3995 3996 /* 3997 * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the 3998 * Completion it generates. 3999 */ 4000 static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) 4001 { 4002 /* 4003 * This mask/compare operation selects for Physical Function 4 on a 4004 * T5. We only need to fix up the Root Port once for any of the 4005 * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely 4006 * 0x54xx so we use that one, 4007 */ 4008 if ((pdev->device & 0xff00) == 0x5400) 4009 quirk_disable_root_port_attributes(pdev); 4010 } 4011 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 4012 quirk_chelsio_T5_disable_root_port_attributes); 4013 4014 /* 4015 * AMD has indicated that the devices below do not support peer-to-peer 4016 * in any system where they are found in the southbridge with an AMD 4017 * IOMMU in the system. Multifunction devices that do not support 4018 * peer-to-peer between functions can claim to support a subset of ACS. 4019 * Such devices effectively enable request redirect (RR) and completion 4020 * redirect (CR) since all transactions are redirected to the upstream 4021 * root complex. 4022 * 4023 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 4024 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 4025 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 4026 * 4027 * 1002:4385 SBx00 SMBus Controller 4028 * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller 4029 * 1002:4383 SBx00 Azalia (Intel HDA) 4030 * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller 4031 * 1002:4384 SBx00 PCI to PCI Bridge 4032 * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 4033 * 4034 * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 4035 * 4036 * 1022:780f [AMD] FCH PCI Bridge 4037 * 1022:7809 [AMD] FCH USB OHCI Controller 4038 */ 4039 static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) 4040 { 4041 #ifdef CONFIG_ACPI 4042 struct acpi_table_header *header = NULL; 4043 acpi_status status; 4044 4045 /* Targeting multifunction devices on the SB (appears on root bus) */ 4046 if (!dev->multifunction || !pci_is_root_bus(dev->bus)) 4047 return -ENODEV; 4048 4049 /* The IVRS table describes the AMD IOMMU */ 4050 status = acpi_get_table("IVRS", 0, &header); 4051 if (ACPI_FAILURE(status)) 4052 return -ENODEV; 4053 4054 /* Filter out flags not applicable to multifunction */ 4055 acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); 4056 4057 return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; 4058 #else 4059 return -ENODEV; 4060 #endif 4061 } 4062 4063 static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) 4064 { 4065 /* 4066 * Cavium devices matching this quirk do not perform peer-to-peer 4067 * with other functions, allowing masking out these bits as if they 4068 * were unimplemented in the ACS capability. 4069 */ 4070 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 4071 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 4072 4073 return acs_flags ? 0 : 1; 4074 } 4075 4076 /* 4077 * Many Intel PCH root ports do provide ACS-like features to disable peer 4078 * transactions and validate bus numbers in requests, but do not provide an 4079 * actual PCIe ACS capability. This is the list of device IDs known to fall 4080 * into that category as provided by Intel in Red Hat bugzilla 1037684. 4081 */ 4082 static const u16 pci_quirk_intel_pch_acs_ids[] = { 4083 /* Ibexpeak PCH */ 4084 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, 4085 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, 4086 /* Cougarpoint PCH */ 4087 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, 4088 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, 4089 /* Pantherpoint PCH */ 4090 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, 4091 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, 4092 /* Lynxpoint-H PCH */ 4093 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, 4094 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, 4095 /* Lynxpoint-LP PCH */ 4096 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, 4097 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, 4098 /* Wildcat PCH */ 4099 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, 4100 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, 4101 /* Patsburg (X79) PCH */ 4102 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, 4103 /* Wellsburg (X99) PCH */ 4104 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, 4105 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, 4106 /* Lynx Point (9 series) PCH */ 4107 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, 4108 }; 4109 4110 static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) 4111 { 4112 int i; 4113 4114 /* Filter out a few obvious non-matches first */ 4115 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4116 return false; 4117 4118 for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) 4119 if (pci_quirk_intel_pch_acs_ids[i] == dev->device) 4120 return true; 4121 4122 return false; 4123 } 4124 4125 #define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) 4126 4127 static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) 4128 { 4129 u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? 4130 INTEL_PCH_ACS_FLAGS : 0; 4131 4132 if (!pci_quirk_intel_pch_acs_match(dev)) 4133 return -ENOTTY; 4134 4135 return acs_flags & ~flags ? 0 : 1; 4136 } 4137 4138 /* 4139 * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in 4140 * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, 4141 * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and 4142 * control registers whereas the PCIe spec packs them into words (Rev 3.0, 4143 * 7.16 ACS Extended Capability). The bit definitions are correct, but the 4144 * control register is at offset 8 instead of 6 and we should probably use 4145 * dword accesses to them. This applies to the following PCI Device IDs, as 4146 * found in volume 1 of the datasheet[2]: 4147 * 4148 * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16} 4149 * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20} 4150 * 4151 * N.B. This doesn't fix what lspci shows. 4152 * 4153 * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html 4154 * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html 4155 */ 4156 static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev) 4157 { 4158 return pci_is_pcie(dev) && 4159 pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT && 4160 ((dev->device & ~0xf) == 0xa110 || 4161 (dev->device >= 0xa167 && dev->device <= 0xa16a)); 4162 } 4163 4164 #define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4) 4165 4166 static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags) 4167 { 4168 int pos; 4169 u32 cap, ctrl; 4170 4171 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4172 return -ENOTTY; 4173 4174 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4175 if (!pos) 4176 return -ENOTTY; 4177 4178 /* see pci_acs_flags_enabled() */ 4179 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4180 acs_flags &= (cap | PCI_ACS_EC); 4181 4182 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4183 4184 return acs_flags & ~ctrl ? 0 : 1; 4185 } 4186 4187 static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) 4188 { 4189 /* 4190 * SV, TB, and UF are not relevant to multifunction endpoints. 4191 * 4192 * Multifunction devices are only required to implement RR, CR, and DT 4193 * in their ACS capability if they support peer-to-peer transactions. 4194 * Devices matching this quirk have been verified by the vendor to not 4195 * perform peer-to-peer with other functions, allowing us to mask out 4196 * these bits as if they were unimplemented in the ACS capability. 4197 */ 4198 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 4199 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 4200 4201 return acs_flags ? 0 : 1; 4202 } 4203 4204 static const struct pci_dev_acs_enabled { 4205 u16 vendor; 4206 u16 device; 4207 int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); 4208 } pci_dev_acs_enabled[] = { 4209 { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, 4210 { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, 4211 { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, 4212 { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, 4213 { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, 4214 { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, 4215 { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, 4216 { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, 4217 { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, 4218 { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, 4219 { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs }, 4220 { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, 4221 { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, 4222 { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, 4223 { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, 4224 { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, 4225 { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, 4226 { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, 4227 { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, 4228 { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, 4229 { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, 4230 { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, 4231 { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, 4232 { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, 4233 { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, 4234 { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, 4235 { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, 4236 { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, 4237 { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, 4238 { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, 4239 { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, 4240 /* 82580 */ 4241 { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, 4242 { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, 4243 { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, 4244 { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, 4245 { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, 4246 { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, 4247 { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, 4248 /* 82576 */ 4249 { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, 4250 { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, 4251 { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, 4252 { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, 4253 { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, 4254 { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, 4255 { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, 4256 { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, 4257 /* 82575 */ 4258 { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, 4259 { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, 4260 { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, 4261 /* I350 */ 4262 { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, 4263 { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, 4264 { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, 4265 { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, 4266 /* 82571 (Quads omitted due to non-ACS switch) */ 4267 { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, 4268 { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, 4269 { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, 4270 { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, 4271 /* I219 */ 4272 { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, 4273 { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, 4274 /* Intel PCH root ports */ 4275 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, 4276 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs }, 4277 { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ 4278 { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ 4279 /* Cavium ThunderX */ 4280 { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, 4281 { 0 } 4282 }; 4283 4284 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) 4285 { 4286 const struct pci_dev_acs_enabled *i; 4287 int ret; 4288 4289 /* 4290 * Allow devices that do not expose standard PCIe ACS capabilities 4291 * or control to indicate their support here. Multi-function express 4292 * devices which do not allow internal peer-to-peer between functions, 4293 * but do not implement PCIe ACS may wish to return true here. 4294 */ 4295 for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { 4296 if ((i->vendor == dev->vendor || 4297 i->vendor == (u16)PCI_ANY_ID) && 4298 (i->device == dev->device || 4299 i->device == (u16)PCI_ANY_ID)) { 4300 ret = i->acs_enabled(dev, acs_flags); 4301 if (ret >= 0) 4302 return ret; 4303 } 4304 } 4305 4306 return -ENOTTY; 4307 } 4308 4309 /* Config space offset of Root Complex Base Address register */ 4310 #define INTEL_LPC_RCBA_REG 0xf0 4311 /* 31:14 RCBA address */ 4312 #define INTEL_LPC_RCBA_MASK 0xffffc000 4313 /* RCBA Enable */ 4314 #define INTEL_LPC_RCBA_ENABLE (1 << 0) 4315 4316 /* Backbone Scratch Pad Register */ 4317 #define INTEL_BSPR_REG 0x1104 4318 /* Backbone Peer Non-Posted Disable */ 4319 #define INTEL_BSPR_REG_BPNPD (1 << 8) 4320 /* Backbone Peer Posted Disable */ 4321 #define INTEL_BSPR_REG_BPPD (1 << 9) 4322 4323 /* Upstream Peer Decode Configuration Register */ 4324 #define INTEL_UPDCR_REG 0x1114 4325 /* 5:0 Peer Decode Enable bits */ 4326 #define INTEL_UPDCR_REG_MASK 0x3f 4327 4328 static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) 4329 { 4330 u32 rcba, bspr, updcr; 4331 void __iomem *rcba_mem; 4332 4333 /* 4334 * Read the RCBA register from the LPC (D31:F0). PCH root ports 4335 * are D28:F* and therefore get probed before LPC, thus we can't 4336 * use pci_get_slot/pci_read_config_dword here. 4337 */ 4338 pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), 4339 INTEL_LPC_RCBA_REG, &rcba); 4340 if (!(rcba & INTEL_LPC_RCBA_ENABLE)) 4341 return -EINVAL; 4342 4343 rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, 4344 PAGE_ALIGN(INTEL_UPDCR_REG)); 4345 if (!rcba_mem) 4346 return -ENOMEM; 4347 4348 /* 4349 * The BSPR can disallow peer cycles, but it's set by soft strap and 4350 * therefore read-only. If both posted and non-posted peer cycles are 4351 * disallowed, we're ok. If either are allowed, then we need to use 4352 * the UPDCR to disable peer decodes for each port. This provides the 4353 * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF 4354 */ 4355 bspr = readl(rcba_mem + INTEL_BSPR_REG); 4356 bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; 4357 if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { 4358 updcr = readl(rcba_mem + INTEL_UPDCR_REG); 4359 if (updcr & INTEL_UPDCR_REG_MASK) { 4360 dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); 4361 updcr &= ~INTEL_UPDCR_REG_MASK; 4362 writel(updcr, rcba_mem + INTEL_UPDCR_REG); 4363 } 4364 } 4365 4366 iounmap(rcba_mem); 4367 return 0; 4368 } 4369 4370 /* Miscellaneous Port Configuration register */ 4371 #define INTEL_MPC_REG 0xd8 4372 /* MPC: Invalid Receive Bus Number Check Enable */ 4373 #define INTEL_MPC_REG_IRBNCE (1 << 26) 4374 4375 static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) 4376 { 4377 u32 mpc; 4378 4379 /* 4380 * When enabled, the IRBNCE bit of the MPC register enables the 4381 * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which 4382 * ensures that requester IDs fall within the bus number range 4383 * of the bridge. Enable if not already. 4384 */ 4385 pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); 4386 if (!(mpc & INTEL_MPC_REG_IRBNCE)) { 4387 dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); 4388 mpc |= INTEL_MPC_REG_IRBNCE; 4389 pci_write_config_word(dev, INTEL_MPC_REG, mpc); 4390 } 4391 } 4392 4393 static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) 4394 { 4395 if (!pci_quirk_intel_pch_acs_match(dev)) 4396 return -ENOTTY; 4397 4398 if (pci_quirk_enable_intel_lpc_acs(dev)) { 4399 dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); 4400 return 0; 4401 } 4402 4403 pci_quirk_enable_intel_rp_mpc_acs(dev); 4404 4405 dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; 4406 4407 dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); 4408 4409 return 0; 4410 } 4411 4412 static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev) 4413 { 4414 int pos; 4415 u32 cap, ctrl; 4416 4417 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4418 return -ENOTTY; 4419 4420 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4421 if (!pos) 4422 return -ENOTTY; 4423 4424 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4425 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4426 4427 ctrl |= (cap & PCI_ACS_SV); 4428 ctrl |= (cap & PCI_ACS_RR); 4429 ctrl |= (cap & PCI_ACS_CR); 4430 ctrl |= (cap & PCI_ACS_UF); 4431 4432 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl); 4433 4434 dev_info(&dev->dev, "Intel SPT PCH root port ACS workaround enabled\n"); 4435 4436 return 0; 4437 } 4438 4439 static const struct pci_dev_enable_acs { 4440 u16 vendor; 4441 u16 device; 4442 int (*enable_acs)(struct pci_dev *dev); 4443 } pci_dev_enable_acs[] = { 4444 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, 4445 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_spt_pch_acs }, 4446 { 0 } 4447 }; 4448 4449 int pci_dev_specific_enable_acs(struct pci_dev *dev) 4450 { 4451 const struct pci_dev_enable_acs *i; 4452 int ret; 4453 4454 for (i = pci_dev_enable_acs; i->enable_acs; i++) { 4455 if ((i->vendor == dev->vendor || 4456 i->vendor == (u16)PCI_ANY_ID) && 4457 (i->device == dev->device || 4458 i->device == (u16)PCI_ANY_ID)) { 4459 ret = i->enable_acs(dev); 4460 if (ret >= 0) 4461 return ret; 4462 } 4463 } 4464 4465 return -ENOTTY; 4466 } 4467 4468 /* 4469 * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with 4470 * QuickAssist Technology (QAT) is prematurely terminated in hardware. The 4471 * Next Capability pointer in the MSI Capability Structure should point to 4472 * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating 4473 * the list. 4474 */ 4475 static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) 4476 { 4477 int pos, i = 0; 4478 u8 next_cap; 4479 u16 reg16, *cap; 4480 struct pci_cap_saved_state *state; 4481 4482 /* Bail if the hardware bug is fixed */ 4483 if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) 4484 return; 4485 4486 /* Bail if MSI Capability Structure is not found for some reason */ 4487 pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); 4488 if (!pos) 4489 return; 4490 4491 /* 4492 * Bail if Next Capability pointer in the MSI Capability Structure 4493 * is not the expected incorrect 0x00. 4494 */ 4495 pci_read_config_byte(pdev, pos + 1, &next_cap); 4496 if (next_cap) 4497 return; 4498 4499 /* 4500 * PCIe Capability Structure is expected to be at 0x50 and should 4501 * terminate the list (Next Capability pointer is 0x00). Verify 4502 * Capability Id and Next Capability pointer is as expected. 4503 * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() 4504 * to correctly set kernel data structures which have already been 4505 * set incorrectly due to the hardware bug. 4506 */ 4507 pos = 0x50; 4508 pci_read_config_word(pdev, pos, ®16); 4509 if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { 4510 u32 status; 4511 #ifndef PCI_EXP_SAVE_REGS 4512 #define PCI_EXP_SAVE_REGS 7 4513 #endif 4514 int size = PCI_EXP_SAVE_REGS * sizeof(u16); 4515 4516 pdev->pcie_cap = pos; 4517 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 4518 pdev->pcie_flags_reg = reg16; 4519 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); 4520 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; 4521 4522 pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; 4523 if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != 4524 PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) 4525 pdev->cfg_size = PCI_CFG_SPACE_SIZE; 4526 4527 if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) 4528 return; 4529 4530 /* 4531 * Save PCIE cap 4532 */ 4533 state = kzalloc(sizeof(*state) + size, GFP_KERNEL); 4534 if (!state) 4535 return; 4536 4537 state->cap.cap_nr = PCI_CAP_ID_EXP; 4538 state->cap.cap_extended = 0; 4539 state->cap.size = size; 4540 cap = (u16 *)&state->cap.data[0]; 4541 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); 4542 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); 4543 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); 4544 pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); 4545 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); 4546 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); 4547 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); 4548 hlist_add_head(&state->next, &pdev->saved_cap_space); 4549 } 4550 } 4551 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); 4552 4553 /* 4554 * VMD-enabled root ports will change the source ID for all messages 4555 * to the VMD device. Rather than doing device matching with the source 4556 * ID, the AER driver should traverse the child device tree, reading 4557 * AER registers to find the faulting device. 4558 */ 4559 static void quirk_no_aersid(struct pci_dev *pdev) 4560 { 4561 /* VMD Domain */ 4562 if (pdev->bus->sysdata && pci_domain_nr(pdev->bus) >= 0x10000) 4563 pdev->bus->bus_flags |= PCI_BUS_FLAGS_NO_AERSID; 4564 } 4565 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2030, quirk_no_aersid); 4566 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid); 4567 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid); 4568 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid); 4569