1 /* 2 * This file contains work-arounds for many known PCI hardware 3 * bugs. Devices present only on certain architectures (host 4 * bridges et cetera) should be handled in arch-specific code. 5 * 6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. 7 * 8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz> 9 * 10 * Init/reset quirks for USB host controllers should be in the 11 * USB quirks file, where their drivers can access reuse it. 12 */ 13 14 #include <linux/types.h> 15 #include <linux/kernel.h> 16 #include <linux/export.h> 17 #include <linux/pci.h> 18 #include <linux/init.h> 19 #include <linux/delay.h> 20 #include <linux/acpi.h> 21 #include <linux/kallsyms.h> 22 #include <linux/dmi.h> 23 #include <linux/pci-aspm.h> 24 #include <linux/ioport.h> 25 #include <linux/sched.h> 26 #include <linux/ktime.h> 27 #include <linux/mm.h> 28 #include <asm/dma.h> /* isa_dma_bridge_buggy */ 29 #include "pci.h" 30 31 /* 32 * Decoding should be disabled for a PCI device during BAR sizing to avoid 33 * conflict. But doing so may cause problems on host bridge and perhaps other 34 * key system devices. For devices that need to have mmio decoding always-on, 35 * we need to set the dev->mmio_always_on bit. 36 */ 37 static void quirk_mmio_always_on(struct pci_dev *dev) 38 { 39 dev->mmio_always_on = 1; 40 } 41 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, 42 PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); 43 44 /* The Mellanox Tavor device gives false positive parity errors 45 * Mark this device with a broken_parity_status, to allow 46 * PCI scanning code to "skip" this now blacklisted device. 47 */ 48 static void quirk_mellanox_tavor(struct pci_dev *dev) 49 { 50 dev->broken_parity_status = 1; /* This device gives false positives */ 51 } 52 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); 53 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); 54 55 /* Deal with broken BIOSes that neglect to enable passive release, 56 which can cause problems in combination with the 82441FX/PPro MTRRs */ 57 static void quirk_passive_release(struct pci_dev *dev) 58 { 59 struct pci_dev *d = NULL; 60 unsigned char dlc; 61 62 /* We have to make sure a particular bit is set in the PIIX3 63 ISA bridge, so we have to go out and find it. */ 64 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { 65 pci_read_config_byte(d, 0x82, &dlc); 66 if (!(dlc & 1<<1)) { 67 dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); 68 dlc |= 1<<1; 69 pci_write_config_byte(d, 0x82, dlc); 70 } 71 } 72 } 73 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 74 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 75 76 /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround 77 but VIA don't answer queries. If you happen to have good contacts at VIA 78 ask them for me please -- Alan 79 80 This appears to be BIOS not version dependent. So presumably there is a 81 chipset level fix */ 82 83 static void quirk_isa_dma_hangs(struct pci_dev *dev) 84 { 85 if (!isa_dma_bridge_buggy) { 86 isa_dma_bridge_buggy = 1; 87 dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); 88 } 89 } 90 /* 91 * Its not totally clear which chipsets are the problematic ones 92 * We know 82C586 and 82C596 variants are affected. 93 */ 94 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); 95 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); 96 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); 97 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); 98 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); 99 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); 100 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); 101 102 /* 103 * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear 104 * for some HT machines to use C4 w/o hanging. 105 */ 106 static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) 107 { 108 u32 pmbase; 109 u16 pm1a; 110 111 pci_read_config_dword(dev, 0x40, &pmbase); 112 pmbase = pmbase & 0xff80; 113 pm1a = inw(pmbase); 114 115 if (pm1a & 0x10) { 116 dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); 117 outw(0x10, pmbase); 118 } 119 } 120 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); 121 122 /* 123 * Chipsets where PCI->PCI transfers vanish or hang 124 */ 125 static void quirk_nopcipci(struct pci_dev *dev) 126 { 127 if ((pci_pci_problems & PCIPCI_FAIL) == 0) { 128 dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); 129 pci_pci_problems |= PCIPCI_FAIL; 130 } 131 } 132 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); 133 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); 134 135 static void quirk_nopciamd(struct pci_dev *dev) 136 { 137 u8 rev; 138 pci_read_config_byte(dev, 0x08, &rev); 139 if (rev == 0x13) { 140 /* Erratum 24 */ 141 dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); 142 pci_pci_problems |= PCIAGP_FAIL; 143 } 144 } 145 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); 146 147 /* 148 * Triton requires workarounds to be used by the drivers 149 */ 150 static void quirk_triton(struct pci_dev *dev) 151 { 152 if ((pci_pci_problems&PCIPCI_TRITON) == 0) { 153 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 154 pci_pci_problems |= PCIPCI_TRITON; 155 } 156 } 157 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); 158 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); 159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); 160 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); 161 162 /* 163 * VIA Apollo KT133 needs PCI latency patch 164 * Made according to a windows driver based patch by George E. Breese 165 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm 166 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for 167 * the info on which Mr Breese based his work. 168 * 169 * Updated based on further information from the site and also on 170 * information provided by VIA 171 */ 172 static void quirk_vialatency(struct pci_dev *dev) 173 { 174 struct pci_dev *p; 175 u8 busarb; 176 /* Ok we have a potential problem chipset here. Now see if we have 177 a buggy southbridge */ 178 179 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); 180 if (p != NULL) { 181 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ 182 /* Check for buggy part revisions */ 183 if (p->revision < 0x40 || p->revision > 0x42) 184 goto exit; 185 } else { 186 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); 187 if (p == NULL) /* No problem parts */ 188 goto exit; 189 /* Check for buggy part revisions */ 190 if (p->revision < 0x10 || p->revision > 0x12) 191 goto exit; 192 } 193 194 /* 195 * Ok we have the problem. Now set the PCI master grant to 196 * occur every master grant. The apparent bug is that under high 197 * PCI load (quite common in Linux of course) you can get data 198 * loss when the CPU is held off the bus for 3 bus master requests 199 * This happens to include the IDE controllers.... 200 * 201 * VIA only apply this fix when an SB Live! is present but under 202 * both Linux and Windows this isn't enough, and we have seen 203 * corruption without SB Live! but with things like 3 UDMA IDE 204 * controllers. So we ignore that bit of the VIA recommendation.. 205 */ 206 207 pci_read_config_byte(dev, 0x76, &busarb); 208 /* Set bit 4 and bi 5 of byte 76 to 0x01 209 "Master priority rotation on every PCI master grant */ 210 busarb &= ~(1<<5); 211 busarb |= (1<<4); 212 pci_write_config_byte(dev, 0x76, busarb); 213 dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); 214 exit: 215 pci_dev_put(p); 216 } 217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 218 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 219 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 220 /* Must restore this on a resume from RAM */ 221 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 222 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 223 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 224 225 /* 226 * VIA Apollo VP3 needs ETBF on BT848/878 227 */ 228 static void quirk_viaetbf(struct pci_dev *dev) 229 { 230 if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { 231 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 232 pci_pci_problems |= PCIPCI_VIAETBF; 233 } 234 } 235 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); 236 237 static void quirk_vsfx(struct pci_dev *dev) 238 { 239 if ((pci_pci_problems&PCIPCI_VSFX) == 0) { 240 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 241 pci_pci_problems |= PCIPCI_VSFX; 242 } 243 } 244 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); 245 246 /* 247 * Ali Magik requires workarounds to be used by the drivers 248 * that DMA to AGP space. Latency must be set to 0xA and triton 249 * workaround applied too 250 * [Info kindly provided by ALi] 251 */ 252 static void quirk_alimagik(struct pci_dev *dev) 253 { 254 if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { 255 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 256 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; 257 } 258 } 259 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); 260 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); 261 262 /* 263 * Natoma has some interesting boundary conditions with Zoran stuff 264 * at least 265 */ 266 static void quirk_natoma(struct pci_dev *dev) 267 { 268 if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { 269 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 270 pci_pci_problems |= PCIPCI_NATOMA; 271 } 272 } 273 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); 274 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); 275 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); 276 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); 277 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); 278 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); 279 280 /* 281 * This chip can cause PCI parity errors if config register 0xA0 is read 282 * while DMAs are occurring. 283 */ 284 static void quirk_citrine(struct pci_dev *dev) 285 { 286 dev->cfg_size = 0xA0; 287 } 288 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); 289 290 /* 291 * This chip can cause bus lockups if config addresses above 0x600 292 * are read or written. 293 */ 294 static void quirk_nfp6000(struct pci_dev *dev) 295 { 296 dev->cfg_size = 0x600; 297 } 298 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); 299 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); 300 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); 301 302 /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ 303 static void quirk_extend_bar_to_page(struct pci_dev *dev) 304 { 305 int i; 306 307 for (i = 0; i < PCI_STD_RESOURCE_END; i++) { 308 struct resource *r = &dev->resource[i]; 309 310 if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { 311 r->end = PAGE_SIZE - 1; 312 r->start = 0; 313 r->flags |= IORESOURCE_UNSET; 314 dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", 315 i, r); 316 } 317 } 318 } 319 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); 320 321 /* 322 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. 323 * If it's needed, re-allocate the region. 324 */ 325 static void quirk_s3_64M(struct pci_dev *dev) 326 { 327 struct resource *r = &dev->resource[0]; 328 329 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { 330 r->flags |= IORESOURCE_UNSET; 331 r->start = 0; 332 r->end = 0x3ffffff; 333 } 334 } 335 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); 336 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); 337 338 static void quirk_io(struct pci_dev *dev, int pos, unsigned size, 339 const char *name) 340 { 341 u32 region; 342 struct pci_bus_region bus_region; 343 struct resource *res = dev->resource + pos; 344 345 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); 346 347 if (!region) 348 return; 349 350 res->name = pci_name(dev); 351 res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; 352 res->flags |= 353 (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); 354 region &= ~(size - 1); 355 356 /* Convert from PCI bus to resource space */ 357 bus_region.start = region; 358 bus_region.end = region + size - 1; 359 pcibios_bus_to_resource(dev->bus, res, &bus_region); 360 361 dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", 362 name, PCI_BASE_ADDRESS_0 + (pos << 2), res); 363 } 364 365 /* 366 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS 367 * ver. 1.33 20070103) don't set the correct ISA PCI region header info. 368 * BAR0 should be 8 bytes; instead, it may be set to something like 8k 369 * (which conflicts w/ BAR1's memory range). 370 * 371 * CS553x's ISA PCI BARs may also be read-only (ref: 372 * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). 373 */ 374 static void quirk_cs5536_vsa(struct pci_dev *dev) 375 { 376 static char *name = "CS5536 ISA bridge"; 377 378 if (pci_resource_len(dev, 0) != 8) { 379 quirk_io(dev, 0, 8, name); /* SMB */ 380 quirk_io(dev, 1, 256, name); /* GPIO */ 381 quirk_io(dev, 2, 64, name); /* MFGPT */ 382 dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", 383 name); 384 } 385 } 386 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); 387 388 static void quirk_io_region(struct pci_dev *dev, int port, 389 unsigned size, int nr, const char *name) 390 { 391 u16 region; 392 struct pci_bus_region bus_region; 393 struct resource *res = dev->resource + nr; 394 395 pci_read_config_word(dev, port, ®ion); 396 region &= ~(size - 1); 397 398 if (!region) 399 return; 400 401 res->name = pci_name(dev); 402 res->flags = IORESOURCE_IO; 403 404 /* Convert from PCI bus to resource space */ 405 bus_region.start = region; 406 bus_region.end = region + size - 1; 407 pcibios_bus_to_resource(dev->bus, res, &bus_region); 408 409 if (!pci_claim_resource(dev, nr)) 410 dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); 411 } 412 413 /* 414 * ATI Northbridge setups MCE the processor if you even 415 * read somewhere between 0x3b0->0x3bb or read 0x3d3 416 */ 417 static void quirk_ati_exploding_mce(struct pci_dev *dev) 418 { 419 dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); 420 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ 421 request_region(0x3b0, 0x0C, "RadeonIGP"); 422 request_region(0x3d3, 0x01, "RadeonIGP"); 423 } 424 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); 425 426 /* 427 * In the AMD NL platform, this device ([1022:7912]) has a class code of 428 * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will 429 * claim it. 430 * But the dwc3 driver is a more specific driver for this device, and we'd 431 * prefer to use it instead of xhci. To prevent xhci from claiming the 432 * device, change the class code to 0x0c03fe, which the PCI r3.0 spec 433 * defines as "USB device (not host controller)". The dwc3 driver can then 434 * claim it based on its Vendor and Device ID. 435 */ 436 static void quirk_amd_nl_class(struct pci_dev *pdev) 437 { 438 u32 class = pdev->class; 439 440 /* Use "USB Device (not host controller)" class */ 441 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; 442 dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", 443 class, pdev->class); 444 } 445 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, 446 quirk_amd_nl_class); 447 448 /* 449 * Let's make the southbridge information explicit instead 450 * of having to worry about people probing the ACPI areas, 451 * for example.. (Yes, it happens, and if you read the wrong 452 * ACPI register it will put the machine to sleep with no 453 * way of waking it up again. Bummer). 454 * 455 * ALI M7101: Two IO regions pointed to by words at 456 * 0xE0 (64 bytes of ACPI registers) 457 * 0xE2 (32 bytes of SMB registers) 458 */ 459 static void quirk_ali7101_acpi(struct pci_dev *dev) 460 { 461 quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); 462 quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); 463 } 464 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); 465 466 static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 467 { 468 u32 devres; 469 u32 mask, size, base; 470 471 pci_read_config_dword(dev, port, &devres); 472 if ((devres & enable) != enable) 473 return; 474 mask = (devres >> 16) & 15; 475 base = devres & 0xffff; 476 size = 16; 477 for (;;) { 478 unsigned bit = size >> 1; 479 if ((bit & mask) == bit) 480 break; 481 size = bit; 482 } 483 /* 484 * For now we only print it out. Eventually we'll want to 485 * reserve it (at least if it's in the 0x1000+ range), but 486 * let's get enough confirmation reports first. 487 */ 488 base &= -size; 489 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, 490 base + size - 1); 491 } 492 493 static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 494 { 495 u32 devres; 496 u32 mask, size, base; 497 498 pci_read_config_dword(dev, port, &devres); 499 if ((devres & enable) != enable) 500 return; 501 base = devres & 0xffff0000; 502 mask = (devres & 0x3f) << 16; 503 size = 128 << 16; 504 for (;;) { 505 unsigned bit = size >> 1; 506 if ((bit & mask) == bit) 507 break; 508 size = bit; 509 } 510 /* 511 * For now we only print it out. Eventually we'll want to 512 * reserve it, but let's get enough confirmation reports first. 513 */ 514 base &= -size; 515 dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, 516 base + size - 1); 517 } 518 519 /* 520 * PIIX4 ACPI: Two IO regions pointed to by longwords at 521 * 0x40 (64 bytes of ACPI registers) 522 * 0x90 (16 bytes of SMB registers) 523 * and a few strange programmable PIIX4 device resources. 524 */ 525 static void quirk_piix4_acpi(struct pci_dev *dev) 526 { 527 u32 res_a; 528 529 quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); 530 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); 531 532 /* Device resource A has enables for some of the other ones */ 533 pci_read_config_dword(dev, 0x5c, &res_a); 534 535 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); 536 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); 537 538 /* Device resource D is just bitfields for static resources */ 539 540 /* Device 12 enabled? */ 541 if (res_a & (1 << 29)) { 542 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); 543 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); 544 } 545 /* Device 13 enabled? */ 546 if (res_a & (1 << 30)) { 547 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); 548 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); 549 } 550 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); 551 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); 552 } 553 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); 554 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); 555 556 #define ICH_PMBASE 0x40 557 #define ICH_ACPI_CNTL 0x44 558 #define ICH4_ACPI_EN 0x10 559 #define ICH6_ACPI_EN 0x80 560 #define ICH4_GPIOBASE 0x58 561 #define ICH4_GPIO_CNTL 0x5c 562 #define ICH4_GPIO_EN 0x10 563 #define ICH6_GPIOBASE 0x48 564 #define ICH6_GPIO_CNTL 0x4c 565 #define ICH6_GPIO_EN 0x10 566 567 /* 568 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at 569 * 0x40 (128 bytes of ACPI, GPIO & TCO registers) 570 * 0x58 (64 bytes of GPIO I/O space) 571 */ 572 static void quirk_ich4_lpc_acpi(struct pci_dev *dev) 573 { 574 u8 enable; 575 576 /* 577 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict 578 * with low legacy (and fixed) ports. We don't know the decoding 579 * priority and can't tell whether the legacy device or the one created 580 * here is really at that address. This happens on boards with broken 581 * BIOSes. 582 */ 583 584 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 585 if (enable & ICH4_ACPI_EN) 586 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 587 "ICH4 ACPI/GPIO/TCO"); 588 589 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); 590 if (enable & ICH4_GPIO_EN) 591 quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 592 "ICH4 GPIO"); 593 } 594 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); 595 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); 596 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); 597 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); 598 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); 599 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); 600 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); 601 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); 602 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); 603 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); 604 605 static void ich6_lpc_acpi_gpio(struct pci_dev *dev) 606 { 607 u8 enable; 608 609 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 610 if (enable & ICH6_ACPI_EN) 611 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 612 "ICH6 ACPI/GPIO/TCO"); 613 614 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); 615 if (enable & ICH6_GPIO_EN) 616 quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 617 "ICH6 GPIO"); 618 } 619 620 static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) 621 { 622 u32 val; 623 u32 size, base; 624 625 pci_read_config_dword(dev, reg, &val); 626 627 /* Enabled? */ 628 if (!(val & 1)) 629 return; 630 base = val & 0xfffc; 631 if (dynsize) { 632 /* 633 * This is not correct. It is 16, 32 or 64 bytes depending on 634 * register D31:F0:ADh bits 5:4. 635 * 636 * But this gets us at least _part_ of it. 637 */ 638 size = 16; 639 } else { 640 size = 128; 641 } 642 base &= ~(size-1); 643 644 /* Just print it out for now. We should reserve it after more debugging */ 645 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); 646 } 647 648 static void quirk_ich6_lpc(struct pci_dev *dev) 649 { 650 /* Shared ACPI/GPIO decode with all ICH6+ */ 651 ich6_lpc_acpi_gpio(dev); 652 653 /* ICH6-specific generic IO decode */ 654 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); 655 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); 656 } 657 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); 658 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); 659 660 static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) 661 { 662 u32 val; 663 u32 mask, base; 664 665 pci_read_config_dword(dev, reg, &val); 666 667 /* Enabled? */ 668 if (!(val & 1)) 669 return; 670 671 /* 672 * IO base in bits 15:2, mask in bits 23:18, both 673 * are dword-based 674 */ 675 base = val & 0xfffc; 676 mask = (val >> 16) & 0xfc; 677 mask |= 3; 678 679 /* Just print it out for now. We should reserve it after more debugging */ 680 dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); 681 } 682 683 /* ICH7-10 has the same common LPC generic IO decode registers */ 684 static void quirk_ich7_lpc(struct pci_dev *dev) 685 { 686 /* We share the common ACPI/GPIO decode with ICH6 */ 687 ich6_lpc_acpi_gpio(dev); 688 689 /* And have 4 ICH7+ generic decodes */ 690 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); 691 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); 692 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); 693 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); 694 } 695 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); 696 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); 697 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); 698 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); 699 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); 700 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); 701 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); 702 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); 703 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); 704 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); 705 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); 706 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); 707 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); 708 709 /* 710 * VIA ACPI: One IO region pointed to by longword at 711 * 0x48 or 0x20 (256 bytes of ACPI registers) 712 */ 713 static void quirk_vt82c586_acpi(struct pci_dev *dev) 714 { 715 if (dev->revision & 0x10) 716 quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, 717 "vt82c586 ACPI"); 718 } 719 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); 720 721 /* 722 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at 723 * 0x48 (256 bytes of ACPI registers) 724 * 0x70 (128 bytes of hardware monitoring register) 725 * 0x90 (16 bytes of SMB registers) 726 */ 727 static void quirk_vt82c686_acpi(struct pci_dev *dev) 728 { 729 quirk_vt82c586_acpi(dev); 730 731 quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, 732 "vt82c686 HW-mon"); 733 734 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); 735 } 736 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); 737 738 /* 739 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at 740 * 0x88 (128 bytes of power management registers) 741 * 0xd0 (16 bytes of SMB registers) 742 */ 743 static void quirk_vt8235_acpi(struct pci_dev *dev) 744 { 745 quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); 746 quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); 747 } 748 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); 749 750 /* 751 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: 752 * Disable fast back-to-back on the secondary bus segment 753 */ 754 static void quirk_xio2000a(struct pci_dev *dev) 755 { 756 struct pci_dev *pdev; 757 u16 command; 758 759 dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); 760 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { 761 pci_read_config_word(pdev, PCI_COMMAND, &command); 762 if (command & PCI_COMMAND_FAST_BACK) 763 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); 764 } 765 } 766 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, 767 quirk_xio2000a); 768 769 #ifdef CONFIG_X86_IO_APIC 770 771 #include <asm/io_apic.h> 772 773 /* 774 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip 775 * devices to the external APIC. 776 * 777 * TODO: When we have device-specific interrupt routers, 778 * this code will go away from quirks. 779 */ 780 static void quirk_via_ioapic(struct pci_dev *dev) 781 { 782 u8 tmp; 783 784 if (nr_ioapics < 1) 785 tmp = 0; /* nothing routed to external APIC */ 786 else 787 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ 788 789 dev_info(&dev->dev, "%sbling VIA external APIC routing\n", 790 tmp == 0 ? "Disa" : "Ena"); 791 792 /* Offset 0x58: External APIC IRQ output control */ 793 pci_write_config_byte(dev, 0x58, tmp); 794 } 795 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 796 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 797 798 /* 799 * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. 800 * This leads to doubled level interrupt rates. 801 * Set this bit to get rid of cycle wastage. 802 * Otherwise uncritical. 803 */ 804 static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) 805 { 806 u8 misc_control2; 807 #define BYPASS_APIC_DEASSERT 8 808 809 pci_read_config_byte(dev, 0x5B, &misc_control2); 810 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { 811 dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); 812 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); 813 } 814 } 815 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 816 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 817 818 /* 819 * The AMD io apic can hang the box when an apic irq is masked. 820 * We check all revs >= B0 (yet not in the pre production!) as the bug 821 * is currently marked NoFix 822 * 823 * We have multiple reports of hangs with this chipset that went away with 824 * noapic specified. For the moment we assume it's the erratum. We may be wrong 825 * of course. However the advice is demonstrably good even if so.. 826 */ 827 static void quirk_amd_ioapic(struct pci_dev *dev) 828 { 829 if (dev->revision >= 0x02) { 830 dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); 831 dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); 832 } 833 } 834 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); 835 #endif /* CONFIG_X86_IO_APIC */ 836 837 #if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS) 838 839 static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) 840 { 841 /* Fix for improper SRIOV configuration on Cavium cn88xx RNM device */ 842 if (dev->subsystem_device == 0xa118) 843 dev->sriov->link = dev->devfn; 844 } 845 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link); 846 #endif 847 848 /* 849 * Some settings of MMRBC can lead to data corruption so block changes. 850 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide 851 */ 852 static void quirk_amd_8131_mmrbc(struct pci_dev *dev) 853 { 854 if (dev->subordinate && dev->revision <= 0x12) { 855 dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", 856 dev->revision); 857 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; 858 } 859 } 860 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); 861 862 /* 863 * FIXME: it is questionable that quirk_via_acpi 864 * is needed. It shows up as an ISA bridge, and does not 865 * support the PCI_INTERRUPT_LINE register at all. Therefore 866 * it seems like setting the pci_dev's 'irq' to the 867 * value of the ACPI SCI interrupt is only done for convenience. 868 * -jgarzik 869 */ 870 static void quirk_via_acpi(struct pci_dev *d) 871 { 872 /* 873 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 874 */ 875 u8 irq; 876 pci_read_config_byte(d, 0x42, &irq); 877 irq &= 0xf; 878 if (irq && (irq != 2)) 879 d->irq = irq; 880 } 881 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); 882 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); 883 884 885 /* 886 * VIA bridges which have VLink 887 */ 888 889 static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; 890 891 static void quirk_via_bridge(struct pci_dev *dev) 892 { 893 /* See what bridge we have and find the device ranges */ 894 switch (dev->device) { 895 case PCI_DEVICE_ID_VIA_82C686: 896 /* The VT82C686 is special, it attaches to PCI and can have 897 any device number. All its subdevices are functions of 898 that single device. */ 899 via_vlink_dev_lo = PCI_SLOT(dev->devfn); 900 via_vlink_dev_hi = PCI_SLOT(dev->devfn); 901 break; 902 case PCI_DEVICE_ID_VIA_8237: 903 case PCI_DEVICE_ID_VIA_8237A: 904 via_vlink_dev_lo = 15; 905 break; 906 case PCI_DEVICE_ID_VIA_8235: 907 via_vlink_dev_lo = 16; 908 break; 909 case PCI_DEVICE_ID_VIA_8231: 910 case PCI_DEVICE_ID_VIA_8233_0: 911 case PCI_DEVICE_ID_VIA_8233A: 912 case PCI_DEVICE_ID_VIA_8233C_0: 913 via_vlink_dev_lo = 17; 914 break; 915 } 916 } 917 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); 918 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); 919 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); 920 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); 921 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); 922 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); 923 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); 924 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); 925 926 /** 927 * quirk_via_vlink - VIA VLink IRQ number update 928 * @dev: PCI device 929 * 930 * If the device we are dealing with is on a PIC IRQ we need to 931 * ensure that the IRQ line register which usually is not relevant 932 * for PCI cards, is actually written so that interrupts get sent 933 * to the right place. 934 * We only do this on systems where a VIA south bridge was detected, 935 * and only for VIA devices on the motherboard (see quirk_via_bridge 936 * above). 937 */ 938 939 static void quirk_via_vlink(struct pci_dev *dev) 940 { 941 u8 irq, new_irq; 942 943 /* Check if we have VLink at all */ 944 if (via_vlink_dev_lo == -1) 945 return; 946 947 new_irq = dev->irq; 948 949 /* Don't quirk interrupts outside the legacy IRQ range */ 950 if (!new_irq || new_irq > 15) 951 return; 952 953 /* Internal device ? */ 954 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || 955 PCI_SLOT(dev->devfn) < via_vlink_dev_lo) 956 return; 957 958 /* This is an internal VLink device on a PIC interrupt. The BIOS 959 ought to have set this but may not have, so we redo it */ 960 961 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 962 if (new_irq != irq) { 963 dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", 964 irq, new_irq); 965 udelay(15); /* unknown if delay really needed */ 966 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); 967 } 968 } 969 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); 970 971 /* 972 * VIA VT82C598 has its device ID settable and many BIOSes 973 * set it to the ID of VT82C597 for backward compatibility. 974 * We need to switch it off to be able to recognize the real 975 * type of the chip. 976 */ 977 static void quirk_vt82c598_id(struct pci_dev *dev) 978 { 979 pci_write_config_byte(dev, 0xfc, 0); 980 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); 981 } 982 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); 983 984 /* 985 * CardBus controllers have a legacy base address that enables them 986 * to respond as i82365 pcmcia controllers. We don't want them to 987 * do this even if the Linux CardBus driver is not loaded, because 988 * the Linux i82365 driver does not (and should not) handle CardBus. 989 */ 990 static void quirk_cardbus_legacy(struct pci_dev *dev) 991 { 992 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); 993 } 994 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 995 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 996 DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, 997 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 998 999 /* 1000 * Following the PCI ordering rules is optional on the AMD762. I'm not 1001 * sure what the designers were smoking but let's not inhale... 1002 * 1003 * To be fair to AMD, it follows the spec by default, its BIOS people 1004 * who turn it off! 1005 */ 1006 static void quirk_amd_ordering(struct pci_dev *dev) 1007 { 1008 u32 pcic; 1009 pci_read_config_dword(dev, 0x4C, &pcic); 1010 if ((pcic & 6) != 6) { 1011 pcic |= 6; 1012 dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); 1013 pci_write_config_dword(dev, 0x4C, pcic); 1014 pci_read_config_dword(dev, 0x84, &pcic); 1015 pcic |= (1 << 23); /* Required in this mode */ 1016 pci_write_config_dword(dev, 0x84, pcic); 1017 } 1018 } 1019 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1020 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1021 1022 /* 1023 * DreamWorks provided workaround for Dunord I-3000 problem 1024 * 1025 * This card decodes and responds to addresses not apparently 1026 * assigned to it. We force a larger allocation to ensure that 1027 * nothing gets put too close to it. 1028 */ 1029 static void quirk_dunord(struct pci_dev *dev) 1030 { 1031 struct resource *r = &dev->resource[1]; 1032 1033 r->flags |= IORESOURCE_UNSET; 1034 r->start = 0; 1035 r->end = 0xffffff; 1036 } 1037 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); 1038 1039 /* 1040 * i82380FB mobile docking controller: its PCI-to-PCI bridge 1041 * is subtractive decoding (transparent), and does indicate this 1042 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 1043 * instead of 0x01. 1044 */ 1045 static void quirk_transparent_bridge(struct pci_dev *dev) 1046 { 1047 dev->transparent = 1; 1048 } 1049 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); 1050 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); 1051 1052 /* 1053 * Common misconfiguration of the MediaGX/Geode PCI master that will 1054 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 1055 * datasheets found at http://www.national.com/analog for info on what 1056 * these bits do. <christer@weinigel.se> 1057 */ 1058 static void quirk_mediagx_master(struct pci_dev *dev) 1059 { 1060 u8 reg; 1061 1062 pci_read_config_byte(dev, 0x41, ®); 1063 if (reg & 2) { 1064 reg &= ~2; 1065 dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", 1066 reg); 1067 pci_write_config_byte(dev, 0x41, reg); 1068 } 1069 } 1070 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1071 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1072 1073 /* 1074 * Ensure C0 rev restreaming is off. This is normally done by 1075 * the BIOS but in the odd case it is not the results are corruption 1076 * hence the presence of a Linux check 1077 */ 1078 static void quirk_disable_pxb(struct pci_dev *pdev) 1079 { 1080 u16 config; 1081 1082 if (pdev->revision != 0x04) /* Only C0 requires this */ 1083 return; 1084 pci_read_config_word(pdev, 0x40, &config); 1085 if (config & (1<<6)) { 1086 config &= ~(1<<6); 1087 pci_write_config_word(pdev, 0x40, config); 1088 dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); 1089 } 1090 } 1091 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1092 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1093 1094 static void quirk_amd_ide_mode(struct pci_dev *pdev) 1095 { 1096 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ 1097 u8 tmp; 1098 1099 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); 1100 if (tmp == 0x01) { 1101 pci_read_config_byte(pdev, 0x40, &tmp); 1102 pci_write_config_byte(pdev, 0x40, tmp|1); 1103 pci_write_config_byte(pdev, 0x9, 1); 1104 pci_write_config_byte(pdev, 0xa, 6); 1105 pci_write_config_byte(pdev, 0x40, tmp); 1106 1107 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; 1108 dev_info(&pdev->dev, "set SATA to AHCI mode\n"); 1109 } 1110 } 1111 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1112 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1113 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1114 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1115 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1116 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1117 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1118 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1119 1120 /* 1121 * Serverworks CSB5 IDE does not fully support native mode 1122 */ 1123 static void quirk_svwks_csb5ide(struct pci_dev *pdev) 1124 { 1125 u8 prog; 1126 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1127 if (prog & 5) { 1128 prog &= ~5; 1129 pdev->class &= ~5; 1130 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1131 /* PCI layer will sort out resources */ 1132 } 1133 } 1134 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); 1135 1136 /* 1137 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same 1138 */ 1139 static void quirk_ide_samemode(struct pci_dev *pdev) 1140 { 1141 u8 prog; 1142 1143 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1144 1145 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { 1146 dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); 1147 prog &= ~5; 1148 pdev->class &= ~5; 1149 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1150 } 1151 } 1152 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); 1153 1154 /* 1155 * Some ATA devices break if put into D3 1156 */ 1157 1158 static void quirk_no_ata_d3(struct pci_dev *pdev) 1159 { 1160 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; 1161 } 1162 /* Quirk the legacy ATA devices only. The AHCI ones are ok */ 1163 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, 1164 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1165 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 1166 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1167 /* ALi loses some register settings that we cannot then restore */ 1168 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, 1169 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1170 /* VIA comes back fine but we need to keep it alive or ACPI GTM failures 1171 occur when mode detecting */ 1172 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, 1173 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1174 1175 /* This was originally an Alpha specific thing, but it really fits here. 1176 * The i82375 PCI/EISA bridge appears as non-classified. Fix that. 1177 */ 1178 static void quirk_eisa_bridge(struct pci_dev *dev) 1179 { 1180 dev->class = PCI_CLASS_BRIDGE_EISA << 8; 1181 } 1182 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); 1183 1184 1185 /* 1186 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge 1187 * is not activated. The myth is that Asus said that they do not want the 1188 * users to be irritated by just another PCI Device in the Win98 device 1189 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors 1190 * package 2.7.0 for details) 1191 * 1192 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC 1193 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 1194 * becomes necessary to do this tweak in two steps -- the chosen trigger 1195 * is either the Host bridge (preferred) or on-board VGA controller. 1196 * 1197 * Note that we used to unhide the SMBus that way on Toshiba laptops 1198 * (Satellite A40 and Tecra M2) but then found that the thermal management 1199 * was done by SMM code, which could cause unsynchronized concurrent 1200 * accesses to the SMBus registers, with potentially bad effects. Thus you 1201 * should be very careful when adding new entries: if SMM is accessing the 1202 * Intel SMBus, this is a very good reason to leave it hidden. 1203 * 1204 * Likewise, many recent laptops use ACPI for thermal management. If the 1205 * ACPI DSDT code accesses the SMBus, then Linux should not access it 1206 * natively, and keeping the SMBus hidden is the right thing to do. If you 1207 * are about to add an entry in the table below, please first disassemble 1208 * the DSDT and double-check that there is no code accessing the SMBus. 1209 */ 1210 static int asus_hides_smbus; 1211 1212 static void asus_hides_smbus_hostbridge(struct pci_dev *dev) 1213 { 1214 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1215 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) 1216 switch (dev->subsystem_device) { 1217 case 0x8025: /* P4B-LX */ 1218 case 0x8070: /* P4B */ 1219 case 0x8088: /* P4B533 */ 1220 case 0x1626: /* L3C notebook */ 1221 asus_hides_smbus = 1; 1222 } 1223 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) 1224 switch (dev->subsystem_device) { 1225 case 0x80b1: /* P4GE-V */ 1226 case 0x80b2: /* P4PE */ 1227 case 0x8093: /* P4B533-V */ 1228 asus_hides_smbus = 1; 1229 } 1230 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) 1231 switch (dev->subsystem_device) { 1232 case 0x8030: /* P4T533 */ 1233 asus_hides_smbus = 1; 1234 } 1235 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) 1236 switch (dev->subsystem_device) { 1237 case 0x8070: /* P4G8X Deluxe */ 1238 asus_hides_smbus = 1; 1239 } 1240 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) 1241 switch (dev->subsystem_device) { 1242 case 0x80c9: /* PU-DLS */ 1243 asus_hides_smbus = 1; 1244 } 1245 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) 1246 switch (dev->subsystem_device) { 1247 case 0x1751: /* M2N notebook */ 1248 case 0x1821: /* M5N notebook */ 1249 case 0x1897: /* A6L notebook */ 1250 asus_hides_smbus = 1; 1251 } 1252 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1253 switch (dev->subsystem_device) { 1254 case 0x184b: /* W1N notebook */ 1255 case 0x186a: /* M6Ne notebook */ 1256 asus_hides_smbus = 1; 1257 } 1258 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1259 switch (dev->subsystem_device) { 1260 case 0x80f2: /* P4P800-X */ 1261 asus_hides_smbus = 1; 1262 } 1263 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) 1264 switch (dev->subsystem_device) { 1265 case 0x1882: /* M6V notebook */ 1266 case 0x1977: /* A6VA notebook */ 1267 asus_hides_smbus = 1; 1268 } 1269 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { 1270 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1271 switch (dev->subsystem_device) { 1272 case 0x088C: /* HP Compaq nc8000 */ 1273 case 0x0890: /* HP Compaq nc6000 */ 1274 asus_hides_smbus = 1; 1275 } 1276 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1277 switch (dev->subsystem_device) { 1278 case 0x12bc: /* HP D330L */ 1279 case 0x12bd: /* HP D530 */ 1280 case 0x006a: /* HP Compaq nx9500 */ 1281 asus_hides_smbus = 1; 1282 } 1283 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) 1284 switch (dev->subsystem_device) { 1285 case 0x12bf: /* HP xw4100 */ 1286 asus_hides_smbus = 1; 1287 } 1288 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { 1289 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1290 switch (dev->subsystem_device) { 1291 case 0xC00C: /* Samsung P35 notebook */ 1292 asus_hides_smbus = 1; 1293 } 1294 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { 1295 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1296 switch (dev->subsystem_device) { 1297 case 0x0058: /* Compaq Evo N620c */ 1298 asus_hides_smbus = 1; 1299 } 1300 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) 1301 switch (dev->subsystem_device) { 1302 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ 1303 /* Motherboard doesn't have Host bridge 1304 * subvendor/subdevice IDs, therefore checking 1305 * its on-board VGA controller */ 1306 asus_hides_smbus = 1; 1307 } 1308 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) 1309 switch (dev->subsystem_device) { 1310 case 0x00b8: /* Compaq Evo D510 CMT */ 1311 case 0x00b9: /* Compaq Evo D510 SFF */ 1312 case 0x00ba: /* Compaq Evo D510 USDT */ 1313 /* Motherboard doesn't have Host bridge 1314 * subvendor/subdevice IDs and on-board VGA 1315 * controller is disabled if an AGP card is 1316 * inserted, therefore checking USB UHCI 1317 * Controller #1 */ 1318 asus_hides_smbus = 1; 1319 } 1320 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) 1321 switch (dev->subsystem_device) { 1322 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ 1323 /* Motherboard doesn't have host bridge 1324 * subvendor/subdevice IDs, therefore checking 1325 * its on-board VGA controller */ 1326 asus_hides_smbus = 1; 1327 } 1328 } 1329 } 1330 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); 1331 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); 1332 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); 1333 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); 1334 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); 1335 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); 1336 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); 1337 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); 1338 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); 1339 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); 1340 1341 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); 1342 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); 1343 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); 1344 1345 static void asus_hides_smbus_lpc(struct pci_dev *dev) 1346 { 1347 u16 val; 1348 1349 if (likely(!asus_hides_smbus)) 1350 return; 1351 1352 pci_read_config_word(dev, 0xF2, &val); 1353 if (val & 0x8) { 1354 pci_write_config_word(dev, 0xF2, val & (~0x8)); 1355 pci_read_config_word(dev, 0xF2, &val); 1356 if (val & 0x8) 1357 dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", 1358 val); 1359 else 1360 dev_info(&dev->dev, "Enabled i801 SMBus device\n"); 1361 } 1362 } 1363 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1364 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1365 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1366 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1367 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1368 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1369 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1370 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1371 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1372 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1373 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1374 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1375 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1376 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1377 1378 /* It appears we just have one such device. If not, we have a warning */ 1379 static void __iomem *asus_rcba_base; 1380 static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) 1381 { 1382 u32 rcba; 1383 1384 if (likely(!asus_hides_smbus)) 1385 return; 1386 WARN_ON(asus_rcba_base); 1387 1388 pci_read_config_dword(dev, 0xF0, &rcba); 1389 /* use bits 31:14, 16 kB aligned */ 1390 asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); 1391 if (asus_rcba_base == NULL) 1392 return; 1393 } 1394 1395 static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) 1396 { 1397 u32 val; 1398 1399 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1400 return; 1401 /* read the Function Disable register, dword mode only */ 1402 val = readl(asus_rcba_base + 0x3418); 1403 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ 1404 } 1405 1406 static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) 1407 { 1408 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1409 return; 1410 iounmap(asus_rcba_base); 1411 asus_rcba_base = NULL; 1412 dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); 1413 } 1414 1415 static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) 1416 { 1417 asus_hides_smbus_lpc_ich6_suspend(dev); 1418 asus_hides_smbus_lpc_ich6_resume_early(dev); 1419 asus_hides_smbus_lpc_ich6_resume(dev); 1420 } 1421 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); 1422 DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); 1423 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); 1424 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); 1425 1426 /* 1427 * SiS 96x south bridge: BIOS typically hides SMBus device... 1428 */ 1429 static void quirk_sis_96x_smbus(struct pci_dev *dev) 1430 { 1431 u8 val = 0; 1432 pci_read_config_byte(dev, 0x77, &val); 1433 if (val & 0x10) { 1434 dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); 1435 pci_write_config_byte(dev, 0x77, val & ~0x10); 1436 } 1437 } 1438 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1439 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1440 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1441 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1442 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1443 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1444 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1445 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1446 1447 /* 1448 * ... This is further complicated by the fact that some SiS96x south 1449 * bridges pretend to be 85C503/5513 instead. In that case see if we 1450 * spotted a compatible north bridge to make sure. 1451 * (pci_find_device doesn't work yet) 1452 * 1453 * We can also enable the sis96x bit in the discovery register.. 1454 */ 1455 #define SIS_DETECT_REGISTER 0x40 1456 1457 static void quirk_sis_503(struct pci_dev *dev) 1458 { 1459 u8 reg; 1460 u16 devid; 1461 1462 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); 1463 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); 1464 pci_read_config_word(dev, PCI_DEVICE_ID, &devid); 1465 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { 1466 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); 1467 return; 1468 } 1469 1470 /* 1471 * Ok, it now shows up as a 96x.. run the 96x quirk by 1472 * hand in case it has already been processed. 1473 * (depends on link order, which is apparently not guaranteed) 1474 */ 1475 dev->device = devid; 1476 quirk_sis_96x_smbus(dev); 1477 } 1478 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1479 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1480 1481 1482 /* 1483 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller 1484 * and MC97 modem controller are disabled when a second PCI soundcard is 1485 * present. This patch, tweaking the VT8237 ISA bridge, enables them. 1486 * -- bjd 1487 */ 1488 static void asus_hides_ac97_lpc(struct pci_dev *dev) 1489 { 1490 u8 val; 1491 int asus_hides_ac97 = 0; 1492 1493 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1494 if (dev->device == PCI_DEVICE_ID_VIA_8237) 1495 asus_hides_ac97 = 1; 1496 } 1497 1498 if (!asus_hides_ac97) 1499 return; 1500 1501 pci_read_config_byte(dev, 0x50, &val); 1502 if (val & 0xc0) { 1503 pci_write_config_byte(dev, 0x50, val & (~0xc0)); 1504 pci_read_config_byte(dev, 0x50, &val); 1505 if (val & 0xc0) 1506 dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", 1507 val); 1508 else 1509 dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); 1510 } 1511 } 1512 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1513 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1514 1515 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) 1516 1517 /* 1518 * If we are using libata we can drive this chip properly but must 1519 * do this early on to make the additional device appear during 1520 * the PCI scanning. 1521 */ 1522 static void quirk_jmicron_ata(struct pci_dev *pdev) 1523 { 1524 u32 conf1, conf5, class; 1525 u8 hdr; 1526 1527 /* Only poke fn 0 */ 1528 if (PCI_FUNC(pdev->devfn)) 1529 return; 1530 1531 pci_read_config_dword(pdev, 0x40, &conf1); 1532 pci_read_config_dword(pdev, 0x80, &conf5); 1533 1534 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ 1535 conf5 &= ~(1 << 24); /* Clear bit 24 */ 1536 1537 switch (pdev->device) { 1538 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ 1539 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ 1540 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ 1541 /* The controller should be in single function ahci mode */ 1542 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ 1543 break; 1544 1545 case PCI_DEVICE_ID_JMICRON_JMB365: 1546 case PCI_DEVICE_ID_JMICRON_JMB366: 1547 /* Redirect IDE second PATA port to the right spot */ 1548 conf5 |= (1 << 24); 1549 /* Fall through */ 1550 case PCI_DEVICE_ID_JMICRON_JMB361: 1551 case PCI_DEVICE_ID_JMICRON_JMB363: 1552 case PCI_DEVICE_ID_JMICRON_JMB369: 1553 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ 1554 /* Set the class codes correctly and then direct IDE 0 */ 1555 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ 1556 break; 1557 1558 case PCI_DEVICE_ID_JMICRON_JMB368: 1559 /* The controller should be in single function IDE mode */ 1560 conf1 |= 0x00C00000; /* Set 22, 23 */ 1561 break; 1562 } 1563 1564 pci_write_config_dword(pdev, 0x40, conf1); 1565 pci_write_config_dword(pdev, 0x80, conf5); 1566 1567 /* Update pdev accordingly */ 1568 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); 1569 pdev->hdr_type = hdr & 0x7f; 1570 pdev->multifunction = !!(hdr & 0x80); 1571 1572 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); 1573 pdev->class = class >> 8; 1574 } 1575 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1576 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1577 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1578 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1579 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1580 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1581 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1582 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1583 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1584 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1585 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1586 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1587 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1588 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1589 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1590 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1591 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1592 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1593 1594 #endif 1595 1596 static void quirk_jmicron_async_suspend(struct pci_dev *dev) 1597 { 1598 if (dev->multifunction) { 1599 device_disable_async_suspend(&dev->dev); 1600 dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); 1601 } 1602 } 1603 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); 1604 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); 1605 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); 1606 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); 1607 1608 #ifdef CONFIG_X86_IO_APIC 1609 static void quirk_alder_ioapic(struct pci_dev *pdev) 1610 { 1611 int i; 1612 1613 if ((pdev->class >> 8) != 0xff00) 1614 return; 1615 1616 /* the first BAR is the location of the IO APIC...we must 1617 * not touch this (and it's already covered by the fixmap), so 1618 * forcibly insert it into the resource tree */ 1619 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) 1620 insert_resource(&iomem_resource, &pdev->resource[0]); 1621 1622 /* The next five BARs all seem to be rubbish, so just clean 1623 * them out */ 1624 for (i = 1; i < 6; i++) 1625 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); 1626 } 1627 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); 1628 #endif 1629 1630 static void quirk_pcie_mch(struct pci_dev *pdev) 1631 { 1632 pdev->no_msi = 1; 1633 } 1634 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); 1635 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); 1636 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); 1637 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, quirk_pcie_mch); 1638 1639 1640 /* 1641 * It's possible for the MSI to get corrupted if shpc and acpi 1642 * are used together on certain PXH-based systems. 1643 */ 1644 static void quirk_pcie_pxh(struct pci_dev *dev) 1645 { 1646 dev->no_msi = 1; 1647 dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); 1648 } 1649 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); 1650 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); 1651 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); 1652 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); 1653 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); 1654 1655 /* 1656 * Some Intel PCI Express chipsets have trouble with downstream 1657 * device power management. 1658 */ 1659 static void quirk_intel_pcie_pm(struct pci_dev *dev) 1660 { 1661 pci_pm_d3_delay = 120; 1662 dev->no_d1d2 = 1; 1663 } 1664 1665 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); 1666 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); 1667 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); 1668 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); 1669 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); 1670 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); 1671 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); 1672 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); 1673 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); 1674 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); 1675 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); 1676 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); 1677 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); 1678 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); 1679 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); 1680 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); 1681 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); 1682 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); 1683 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); 1684 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); 1685 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); 1686 1687 #ifdef CONFIG_X86_IO_APIC 1688 /* 1689 * Boot interrupts on some chipsets cannot be turned off. For these chipsets, 1690 * remap the original interrupt in the linux kernel to the boot interrupt, so 1691 * that a PCI device's interrupt handler is installed on the boot interrupt 1692 * line instead. 1693 */ 1694 static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) 1695 { 1696 if (noioapicquirk || noioapicreroute) 1697 return; 1698 1699 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; 1700 dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", 1701 dev->vendor, dev->device); 1702 } 1703 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1704 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1705 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1706 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1707 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1708 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1709 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1710 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1711 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1712 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1713 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1714 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1715 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1716 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1717 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1718 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1719 1720 /* 1721 * On some chipsets we can disable the generation of legacy INTx boot 1722 * interrupts. 1723 */ 1724 1725 /* 1726 * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no 1727 * 300641-004US, section 5.7.3. 1728 */ 1729 #define INTEL_6300_IOAPIC_ABAR 0x40 1730 #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) 1731 1732 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) 1733 { 1734 u16 pci_config_word; 1735 1736 if (noioapicquirk) 1737 return; 1738 1739 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); 1740 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; 1741 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); 1742 1743 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1744 dev->vendor, dev->device); 1745 } 1746 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1747 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1748 1749 /* 1750 * disable boot interrupts on HT-1000 1751 */ 1752 #define BC_HT1000_FEATURE_REG 0x64 1753 #define BC_HT1000_PIC_REGS_ENABLE (1<<0) 1754 #define BC_HT1000_MAP_IDX 0xC00 1755 #define BC_HT1000_MAP_DATA 0xC01 1756 1757 static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) 1758 { 1759 u32 pci_config_dword; 1760 u8 irq; 1761 1762 if (noioapicquirk) 1763 return; 1764 1765 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); 1766 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | 1767 BC_HT1000_PIC_REGS_ENABLE); 1768 1769 for (irq = 0x10; irq < 0x10 + 32; irq++) { 1770 outb(irq, BC_HT1000_MAP_IDX); 1771 outb(0x00, BC_HT1000_MAP_DATA); 1772 } 1773 1774 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); 1775 1776 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1777 dev->vendor, dev->device); 1778 } 1779 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1780 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1781 1782 /* 1783 * disable boot interrupts on AMD and ATI chipsets 1784 */ 1785 /* 1786 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 1787 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode 1788 * (due to an erratum). 1789 */ 1790 #define AMD_813X_MISC 0x40 1791 #define AMD_813X_NOIOAMODE (1<<0) 1792 #define AMD_813X_REV_B1 0x12 1793 #define AMD_813X_REV_B2 0x13 1794 1795 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) 1796 { 1797 u32 pci_config_dword; 1798 1799 if (noioapicquirk) 1800 return; 1801 if ((dev->revision == AMD_813X_REV_B1) || 1802 (dev->revision == AMD_813X_REV_B2)) 1803 return; 1804 1805 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); 1806 pci_config_dword &= ~AMD_813X_NOIOAMODE; 1807 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); 1808 1809 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1810 dev->vendor, dev->device); 1811 } 1812 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1813 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1814 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1815 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1816 1817 #define AMD_8111_PCI_IRQ_ROUTING 0x56 1818 1819 static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) 1820 { 1821 u16 pci_config_word; 1822 1823 if (noioapicquirk) 1824 return; 1825 1826 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); 1827 if (!pci_config_word) { 1828 dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", 1829 dev->vendor, dev->device); 1830 return; 1831 } 1832 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); 1833 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1834 dev->vendor, dev->device); 1835 } 1836 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1837 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1838 #endif /* CONFIG_X86_IO_APIC */ 1839 1840 /* 1841 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size 1842 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. 1843 * Re-allocate the region if needed... 1844 */ 1845 static void quirk_tc86c001_ide(struct pci_dev *dev) 1846 { 1847 struct resource *r = &dev->resource[0]; 1848 1849 if (r->start & 0x8) { 1850 r->flags |= IORESOURCE_UNSET; 1851 r->start = 0; 1852 r->end = 0xf; 1853 } 1854 } 1855 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, 1856 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, 1857 quirk_tc86c001_ide); 1858 1859 /* 1860 * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the 1861 * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) 1862 * being read correctly if bit 7 of the base address is set. 1863 * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). 1864 * Re-allocate the regions to a 256-byte boundary if necessary. 1865 */ 1866 static void quirk_plx_pci9050(struct pci_dev *dev) 1867 { 1868 unsigned int bar; 1869 1870 /* Fixed in revision 2 (PCI 9052). */ 1871 if (dev->revision >= 2) 1872 return; 1873 for (bar = 0; bar <= 1; bar++) 1874 if (pci_resource_len(dev, bar) == 0x80 && 1875 (pci_resource_start(dev, bar) & 0x80)) { 1876 struct resource *r = &dev->resource[bar]; 1877 dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", 1878 bar); 1879 r->flags |= IORESOURCE_UNSET; 1880 r->start = 0; 1881 r->end = 0xff; 1882 } 1883 } 1884 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 1885 quirk_plx_pci9050); 1886 /* 1887 * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) 1888 * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, 1889 * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, 1890 * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. 1891 * 1892 * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" 1893 * driver. 1894 */ 1895 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); 1896 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); 1897 1898 static void quirk_netmos(struct pci_dev *dev) 1899 { 1900 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; 1901 unsigned int num_serial = dev->subsystem_device & 0xf; 1902 1903 /* 1904 * These Netmos parts are multiport serial devices with optional 1905 * parallel ports. Even when parallel ports are present, they 1906 * are identified as class SERIAL, which means the serial driver 1907 * will claim them. To prevent this, mark them as class OTHER. 1908 * These combo devices should be claimed by parport_serial. 1909 * 1910 * The subdevice ID is of the form 0x00PS, where <P> is the number 1911 * of parallel ports and <S> is the number of serial ports. 1912 */ 1913 switch (dev->device) { 1914 case PCI_DEVICE_ID_NETMOS_9835: 1915 /* Well, this rule doesn't hold for the following 9835 device */ 1916 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 1917 dev->subsystem_device == 0x0299) 1918 return; 1919 case PCI_DEVICE_ID_NETMOS_9735: 1920 case PCI_DEVICE_ID_NETMOS_9745: 1921 case PCI_DEVICE_ID_NETMOS_9845: 1922 case PCI_DEVICE_ID_NETMOS_9855: 1923 if (num_parallel) { 1924 dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", 1925 dev->device, num_parallel, num_serial); 1926 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | 1927 (dev->class & 0xff); 1928 } 1929 } 1930 } 1931 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, 1932 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); 1933 1934 /* 1935 * Quirk non-zero PCI functions to route VPD access through function 0 for 1936 * devices that share VPD resources between functions. The functions are 1937 * expected to be identical devices. 1938 */ 1939 static void quirk_f0_vpd_link(struct pci_dev *dev) 1940 { 1941 struct pci_dev *f0; 1942 1943 if (!PCI_FUNC(dev->devfn)) 1944 return; 1945 1946 f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); 1947 if (!f0) 1948 return; 1949 1950 if (f0->vpd && dev->class == f0->class && 1951 dev->vendor == f0->vendor && dev->device == f0->device) 1952 dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; 1953 1954 pci_dev_put(f0); 1955 } 1956 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 1957 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); 1958 1959 static void quirk_e100_interrupt(struct pci_dev *dev) 1960 { 1961 u16 command, pmcsr; 1962 u8 __iomem *csr; 1963 u8 cmd_hi; 1964 1965 switch (dev->device) { 1966 /* PCI IDs taken from drivers/net/e100.c */ 1967 case 0x1029: 1968 case 0x1030 ... 0x1034: 1969 case 0x1038 ... 0x103E: 1970 case 0x1050 ... 0x1057: 1971 case 0x1059: 1972 case 0x1064 ... 0x106B: 1973 case 0x1091 ... 0x1095: 1974 case 0x1209: 1975 case 0x1229: 1976 case 0x2449: 1977 case 0x2459: 1978 case 0x245D: 1979 case 0x27DC: 1980 break; 1981 default: 1982 return; 1983 } 1984 1985 /* 1986 * Some firmware hands off the e100 with interrupts enabled, 1987 * which can cause a flood of interrupts if packets are 1988 * received before the driver attaches to the device. So 1989 * disable all e100 interrupts here. The driver will 1990 * re-enable them when it's ready. 1991 */ 1992 pci_read_config_word(dev, PCI_COMMAND, &command); 1993 1994 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) 1995 return; 1996 1997 /* 1998 * Check that the device is in the D0 power state. If it's not, 1999 * there is no point to look any further. 2000 */ 2001 if (dev->pm_cap) { 2002 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); 2003 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) 2004 return; 2005 } 2006 2007 /* Convert from PCI bus to resource space. */ 2008 csr = ioremap(pci_resource_start(dev, 0), 8); 2009 if (!csr) { 2010 dev_warn(&dev->dev, "Can't map e100 registers\n"); 2011 return; 2012 } 2013 2014 cmd_hi = readb(csr + 3); 2015 if (cmd_hi == 0) { 2016 dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); 2017 writeb(1, csr + 3); 2018 } 2019 2020 iounmap(csr); 2021 } 2022 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 2023 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); 2024 2025 /* 2026 * The 82575 and 82598 may experience data corruption issues when transitioning 2027 * out of L0S. To prevent this we need to disable L0S on the pci-e link 2028 */ 2029 static void quirk_disable_aspm_l0s(struct pci_dev *dev) 2030 { 2031 dev_info(&dev->dev, "Disabling L0s\n"); 2032 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); 2033 } 2034 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); 2035 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); 2036 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); 2037 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); 2038 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); 2039 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); 2040 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); 2041 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); 2042 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); 2043 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); 2044 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); 2045 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); 2046 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); 2047 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); 2048 2049 static void fixup_rev1_53c810(struct pci_dev *dev) 2050 { 2051 u32 class = dev->class; 2052 2053 /* 2054 * rev 1 ncr53c810 chips don't set the class at all which means 2055 * they don't get their resources remapped. Fix that here. 2056 */ 2057 if (class) 2058 return; 2059 2060 dev->class = PCI_CLASS_STORAGE_SCSI << 8; 2061 dev_info(&dev->dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", 2062 class, dev->class); 2063 } 2064 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); 2065 2066 /* Enable 1k I/O space granularity on the Intel P64H2 */ 2067 static void quirk_p64h2_1k_io(struct pci_dev *dev) 2068 { 2069 u16 en1k; 2070 2071 pci_read_config_word(dev, 0x40, &en1k); 2072 2073 if (en1k & 0x200) { 2074 dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); 2075 dev->io_window_1k = 1; 2076 } 2077 } 2078 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); 2079 2080 /* Under some circumstances, AER is not linked with extended capabilities. 2081 * Force it to be linked by setting the corresponding control bit in the 2082 * config space. 2083 */ 2084 static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) 2085 { 2086 uint8_t b; 2087 if (pci_read_config_byte(dev, 0xf41, &b) == 0) { 2088 if (!(b & 0x20)) { 2089 pci_write_config_byte(dev, 0xf41, b | 0x20); 2090 dev_info(&dev->dev, "Linking AER extended capability\n"); 2091 } 2092 } 2093 } 2094 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2095 quirk_nvidia_ck804_pcie_aer_ext_cap); 2096 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2097 quirk_nvidia_ck804_pcie_aer_ext_cap); 2098 2099 static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) 2100 { 2101 /* 2102 * Disable PCI Bus Parking and PCI Master read caching on CX700 2103 * which causes unspecified timing errors with a VT6212L on the PCI 2104 * bus leading to USB2.0 packet loss. 2105 * 2106 * This quirk is only enabled if a second (on the external PCI bus) 2107 * VT6212L is found -- the CX700 core itself also contains a USB 2108 * host controller with the same PCI ID as the VT6212L. 2109 */ 2110 2111 /* Count VT6212L instances */ 2112 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, 2113 PCI_DEVICE_ID_VIA_8235_USB_2, NULL); 2114 uint8_t b; 2115 2116 /* p should contain the first (internal) VT6212L -- see if we have 2117 an external one by searching again */ 2118 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); 2119 if (!p) 2120 return; 2121 pci_dev_put(p); 2122 2123 if (pci_read_config_byte(dev, 0x76, &b) == 0) { 2124 if (b & 0x40) { 2125 /* Turn off PCI Bus Parking */ 2126 pci_write_config_byte(dev, 0x76, b ^ 0x40); 2127 2128 dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); 2129 } 2130 } 2131 2132 if (pci_read_config_byte(dev, 0x72, &b) == 0) { 2133 if (b != 0) { 2134 /* Turn off PCI Master read caching */ 2135 pci_write_config_byte(dev, 0x72, 0x0); 2136 2137 /* Set PCI Master Bus time-out to "1x16 PCLK" */ 2138 pci_write_config_byte(dev, 0x75, 0x1); 2139 2140 /* Disable "Read FIFO Timer" */ 2141 pci_write_config_byte(dev, 0x77, 0x0); 2142 2143 dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); 2144 } 2145 } 2146 } 2147 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); 2148 2149 /* 2150 * If a device follows the VPD format spec, the PCI core will not read or 2151 * write past the VPD End Tag. But some vendors do not follow the VPD 2152 * format spec, so we can't tell how much data is safe to access. Devices 2153 * may behave unpredictably if we access too much. Blacklist these devices 2154 * so we don't touch VPD at all. 2155 */ 2156 static void quirk_blacklist_vpd(struct pci_dev *dev) 2157 { 2158 if (dev->vpd) { 2159 dev->vpd->len = 0; 2160 dev_warn(&dev->dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n"); 2161 } 2162 } 2163 2164 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd); 2165 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd); 2166 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd); 2167 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd); 2168 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd); 2169 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd); 2170 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd); 2171 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd); 2172 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd); 2173 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd); 2174 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd); 2175 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, 2176 quirk_blacklist_vpd); 2177 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_QLOGIC, 0x2261, quirk_blacklist_vpd); 2178 2179 /* 2180 * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the 2181 * VPD end tag will hang the device. This problem was initially 2182 * observed when a vpd entry was created in sysfs 2183 * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry 2184 * will dump 32k of data. Reading a full 32k will cause an access 2185 * beyond the VPD end tag causing the device to hang. Once the device 2186 * is hung, the bnx2 driver will not be able to reset the device. 2187 * We believe that it is legal to read beyond the end tag and 2188 * therefore the solution is to limit the read/write length. 2189 */ 2190 static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) 2191 { 2192 /* 2193 * Only disable the VPD capability for 5706, 5706S, 5708, 2194 * 5708S and 5709 rev. A 2195 */ 2196 if ((dev->device == PCI_DEVICE_ID_NX2_5706) || 2197 (dev->device == PCI_DEVICE_ID_NX2_5706S) || 2198 (dev->device == PCI_DEVICE_ID_NX2_5708) || 2199 (dev->device == PCI_DEVICE_ID_NX2_5708S) || 2200 ((dev->device == PCI_DEVICE_ID_NX2_5709) && 2201 (dev->revision & 0xf0) == 0x0)) { 2202 if (dev->vpd) 2203 dev->vpd->len = 0x80; 2204 } 2205 } 2206 2207 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2208 PCI_DEVICE_ID_NX2_5706, 2209 quirk_brcm_570x_limit_vpd); 2210 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2211 PCI_DEVICE_ID_NX2_5706S, 2212 quirk_brcm_570x_limit_vpd); 2213 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2214 PCI_DEVICE_ID_NX2_5708, 2215 quirk_brcm_570x_limit_vpd); 2216 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2217 PCI_DEVICE_ID_NX2_5708S, 2218 quirk_brcm_570x_limit_vpd); 2219 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2220 PCI_DEVICE_ID_NX2_5709, 2221 quirk_brcm_570x_limit_vpd); 2222 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2223 PCI_DEVICE_ID_NX2_5709S, 2224 quirk_brcm_570x_limit_vpd); 2225 2226 static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) 2227 { 2228 u32 rev; 2229 2230 pci_read_config_dword(dev, 0xf4, &rev); 2231 2232 /* Only CAP the MRRS if the device is a 5719 A0 */ 2233 if (rev == 0x05719000) { 2234 int readrq = pcie_get_readrq(dev); 2235 if (readrq > 2048) 2236 pcie_set_readrq(dev, 2048); 2237 } 2238 } 2239 2240 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, 2241 PCI_DEVICE_ID_TIGON3_5719, 2242 quirk_brcm_5719_limit_mrrs); 2243 2244 #ifdef CONFIG_PCIE_IPROC_PLATFORM 2245 static void quirk_paxc_bridge(struct pci_dev *pdev) 2246 { 2247 /* The PCI config space is shared with the PAXC root port and the first 2248 * Ethernet device. So, we need to workaround this by telling the PCI 2249 * code that the bridge is not an Ethernet device. 2250 */ 2251 if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) 2252 pdev->class = PCI_CLASS_BRIDGE_PCI << 8; 2253 2254 /* MPSS is not being set properly (as it is currently 0). This is 2255 * because that area of the PCI config space is hard coded to zero, and 2256 * is not modifiable by firmware. Set this to 2 (e.g., 512 byte MPS) 2257 * so that the MPS can be set to the real max value. 2258 */ 2259 pdev->pcie_mpss = 2; 2260 } 2261 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16cd, quirk_paxc_bridge); 2262 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_BROADCOM, 0x16f0, quirk_paxc_bridge); 2263 #endif 2264 2265 /* Originally in EDAC sources for i82875P: 2266 * Intel tells BIOS developers to hide device 6 which 2267 * configures the overflow device access containing 2268 * the DRBs - this is where we expose device 6. 2269 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 2270 */ 2271 static void quirk_unhide_mch_dev6(struct pci_dev *dev) 2272 { 2273 u8 reg; 2274 2275 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { 2276 dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); 2277 pci_write_config_byte(dev, 0xF4, reg | 0x02); 2278 } 2279 } 2280 2281 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, 2282 quirk_unhide_mch_dev6); 2283 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, 2284 quirk_unhide_mch_dev6); 2285 2286 #ifdef CONFIG_TILEPRO 2287 /* 2288 * The Tilera TILEmpower tilepro platform needs to set the link speed 2289 * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed 2290 * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe 2291 * capability register of the PEX8624 PCIe switch. The switch 2292 * supports link speed auto negotiation, but falsely sets 2293 * the link speed to 5GT/s. 2294 */ 2295 static void quirk_tile_plx_gen1(struct pci_dev *dev) 2296 { 2297 if (tile_plx_gen1) { 2298 pci_write_config_dword(dev, 0x98, 0x1); 2299 mdelay(50); 2300 } 2301 } 2302 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); 2303 #endif /* CONFIG_TILEPRO */ 2304 2305 #ifdef CONFIG_PCI_MSI 2306 /* Some chipsets do not support MSI. We cannot easily rely on setting 2307 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually 2308 * some other buses controlled by the chipset even if Linux is not 2309 * aware of it. Instead of setting the flag on all buses in the 2310 * machine, simply disable MSI globally. 2311 */ 2312 static void quirk_disable_all_msi(struct pci_dev *dev) 2313 { 2314 pci_no_msi(); 2315 dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); 2316 } 2317 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); 2318 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); 2319 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); 2320 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); 2321 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); 2322 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); 2323 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); 2324 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); 2325 2326 /* Disable MSI on chipsets that are known to not support it */ 2327 static void quirk_disable_msi(struct pci_dev *dev) 2328 { 2329 if (dev->subordinate) { 2330 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2331 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2332 } 2333 } 2334 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); 2335 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); 2336 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); 2337 2338 /* 2339 * The APC bridge device in AMD 780 family northbridges has some random 2340 * OEM subsystem ID in its vendor ID register (erratum 18), so instead 2341 * we use the possible vendor/device IDs of the host bridge for the 2342 * declared quirk, and search for the APC bridge by slot number. 2343 */ 2344 static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) 2345 { 2346 struct pci_dev *apc_bridge; 2347 2348 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); 2349 if (apc_bridge) { 2350 if (apc_bridge->device == 0x9602) 2351 quirk_disable_msi(apc_bridge); 2352 pci_dev_put(apc_bridge); 2353 } 2354 } 2355 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); 2356 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); 2357 2358 /* Go through the list of Hypertransport capabilities and 2359 * return 1 if a HT MSI capability is found and enabled */ 2360 static int msi_ht_cap_enabled(struct pci_dev *dev) 2361 { 2362 int pos, ttl = PCI_FIND_CAP_TTL; 2363 2364 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2365 while (pos && ttl--) { 2366 u8 flags; 2367 2368 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2369 &flags) == 0) { 2370 dev_info(&dev->dev, "Found %s HT MSI Mapping\n", 2371 flags & HT_MSI_FLAGS_ENABLE ? 2372 "enabled" : "disabled"); 2373 return (flags & HT_MSI_FLAGS_ENABLE) != 0; 2374 } 2375 2376 pos = pci_find_next_ht_capability(dev, pos, 2377 HT_CAPTYPE_MSI_MAPPING); 2378 } 2379 return 0; 2380 } 2381 2382 /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ 2383 static void quirk_msi_ht_cap(struct pci_dev *dev) 2384 { 2385 if (dev->subordinate && !msi_ht_cap_enabled(dev)) { 2386 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2387 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2388 } 2389 } 2390 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, 2391 quirk_msi_ht_cap); 2392 2393 /* The nVidia CK804 chipset may have 2 HT MSI mappings. 2394 * MSI are supported if the MSI capability set in any of these mappings. 2395 */ 2396 static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) 2397 { 2398 struct pci_dev *pdev; 2399 2400 if (!dev->subordinate) 2401 return; 2402 2403 /* check HT MSI cap on this chipset and the root one. 2404 * a single one having MSI is enough to be sure that MSI are supported. 2405 */ 2406 pdev = pci_get_slot(dev->bus, 0); 2407 if (!pdev) 2408 return; 2409 if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { 2410 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2411 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2412 } 2413 pci_dev_put(pdev); 2414 } 2415 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2416 quirk_nvidia_ck804_msi_ht_cap); 2417 2418 /* Force enable MSI mapping capability on HT bridges */ 2419 static void ht_enable_msi_mapping(struct pci_dev *dev) 2420 { 2421 int pos, ttl = PCI_FIND_CAP_TTL; 2422 2423 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2424 while (pos && ttl--) { 2425 u8 flags; 2426 2427 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2428 &flags) == 0) { 2429 dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); 2430 2431 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2432 flags | HT_MSI_FLAGS_ENABLE); 2433 } 2434 pos = pci_find_next_ht_capability(dev, pos, 2435 HT_CAPTYPE_MSI_MAPPING); 2436 } 2437 } 2438 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 2439 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, 2440 ht_enable_msi_mapping); 2441 2442 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, 2443 ht_enable_msi_mapping); 2444 2445 /* The P5N32-SLI motherboards from Asus have a problem with msi 2446 * for the MCP55 NIC. It is not yet determined whether the msi problem 2447 * also affects other devices. As for now, turn off msi for this device. 2448 */ 2449 static void nvenet_msi_disable(struct pci_dev *dev) 2450 { 2451 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); 2452 2453 if (board_name && 2454 (strstr(board_name, "P5N32-SLI PREMIUM") || 2455 strstr(board_name, "P5N32-E SLI"))) { 2456 dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); 2457 dev->no_msi = 1; 2458 } 2459 } 2460 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2461 PCI_DEVICE_ID_NVIDIA_NVENET_15, 2462 nvenet_msi_disable); 2463 2464 /* 2465 * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing 2466 * config register. This register controls the routing of legacy 2467 * interrupts from devices that route through the MCP55. If this register 2468 * is misprogrammed, interrupts are only sent to the BSP, unlike 2469 * conventional systems where the IRQ is broadcast to all online CPUs. Not 2470 * having this register set properly prevents kdump from booting up 2471 * properly, so let's make sure that we have it set correctly. 2472 * Note that this is an undocumented register. 2473 */ 2474 static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) 2475 { 2476 u32 cfg; 2477 2478 if (!pci_find_capability(dev, PCI_CAP_ID_HT)) 2479 return; 2480 2481 pci_read_config_dword(dev, 0x74, &cfg); 2482 2483 if (cfg & ((1 << 2) | (1 << 15))) { 2484 printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); 2485 cfg &= ~((1 << 2) | (1 << 15)); 2486 pci_write_config_dword(dev, 0x74, cfg); 2487 } 2488 } 2489 2490 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2491 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, 2492 nvbridge_check_legacy_irq_routing); 2493 2494 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2495 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, 2496 nvbridge_check_legacy_irq_routing); 2497 2498 static int ht_check_msi_mapping(struct pci_dev *dev) 2499 { 2500 int pos, ttl = PCI_FIND_CAP_TTL; 2501 int found = 0; 2502 2503 /* check if there is HT MSI cap or enabled on this device */ 2504 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2505 while (pos && ttl--) { 2506 u8 flags; 2507 2508 if (found < 1) 2509 found = 1; 2510 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2511 &flags) == 0) { 2512 if (flags & HT_MSI_FLAGS_ENABLE) { 2513 if (found < 2) { 2514 found = 2; 2515 break; 2516 } 2517 } 2518 } 2519 pos = pci_find_next_ht_capability(dev, pos, 2520 HT_CAPTYPE_MSI_MAPPING); 2521 } 2522 2523 return found; 2524 } 2525 2526 static int host_bridge_with_leaf(struct pci_dev *host_bridge) 2527 { 2528 struct pci_dev *dev; 2529 int pos; 2530 int i, dev_no; 2531 int found = 0; 2532 2533 dev_no = host_bridge->devfn >> 3; 2534 for (i = dev_no + 1; i < 0x20; i++) { 2535 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); 2536 if (!dev) 2537 continue; 2538 2539 /* found next host bridge ?*/ 2540 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2541 if (pos != 0) { 2542 pci_dev_put(dev); 2543 break; 2544 } 2545 2546 if (ht_check_msi_mapping(dev)) { 2547 found = 1; 2548 pci_dev_put(dev); 2549 break; 2550 } 2551 pci_dev_put(dev); 2552 } 2553 2554 return found; 2555 } 2556 2557 #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ 2558 #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ 2559 2560 static int is_end_of_ht_chain(struct pci_dev *dev) 2561 { 2562 int pos, ctrl_off; 2563 int end = 0; 2564 u16 flags, ctrl; 2565 2566 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2567 2568 if (!pos) 2569 goto out; 2570 2571 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); 2572 2573 ctrl_off = ((flags >> 10) & 1) ? 2574 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; 2575 pci_read_config_word(dev, pos + ctrl_off, &ctrl); 2576 2577 if (ctrl & (1 << 6)) 2578 end = 1; 2579 2580 out: 2581 return end; 2582 } 2583 2584 static void nv_ht_enable_msi_mapping(struct pci_dev *dev) 2585 { 2586 struct pci_dev *host_bridge; 2587 int pos; 2588 int i, dev_no; 2589 int found = 0; 2590 2591 dev_no = dev->devfn >> 3; 2592 for (i = dev_no; i >= 0; i--) { 2593 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); 2594 if (!host_bridge) 2595 continue; 2596 2597 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2598 if (pos != 0) { 2599 found = 1; 2600 break; 2601 } 2602 pci_dev_put(host_bridge); 2603 } 2604 2605 if (!found) 2606 return; 2607 2608 /* don't enable end_device/host_bridge with leaf directly here */ 2609 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && 2610 host_bridge_with_leaf(host_bridge)) 2611 goto out; 2612 2613 /* root did that ! */ 2614 if (msi_ht_cap_enabled(host_bridge)) 2615 goto out; 2616 2617 ht_enable_msi_mapping(dev); 2618 2619 out: 2620 pci_dev_put(host_bridge); 2621 } 2622 2623 static void ht_disable_msi_mapping(struct pci_dev *dev) 2624 { 2625 int pos, ttl = PCI_FIND_CAP_TTL; 2626 2627 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2628 while (pos && ttl--) { 2629 u8 flags; 2630 2631 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2632 &flags) == 0) { 2633 dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); 2634 2635 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2636 flags & ~HT_MSI_FLAGS_ENABLE); 2637 } 2638 pos = pci_find_next_ht_capability(dev, pos, 2639 HT_CAPTYPE_MSI_MAPPING); 2640 } 2641 } 2642 2643 static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) 2644 { 2645 struct pci_dev *host_bridge; 2646 int pos; 2647 int found; 2648 2649 if (!pci_msi_enabled()) 2650 return; 2651 2652 /* check if there is HT MSI cap or enabled on this device */ 2653 found = ht_check_msi_mapping(dev); 2654 2655 /* no HT MSI CAP */ 2656 if (found == 0) 2657 return; 2658 2659 /* 2660 * HT MSI mapping should be disabled on devices that are below 2661 * a non-Hypertransport host bridge. Locate the host bridge... 2662 */ 2663 host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); 2664 if (host_bridge == NULL) { 2665 dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); 2666 return; 2667 } 2668 2669 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2670 if (pos != 0) { 2671 /* Host bridge is to HT */ 2672 if (found == 1) { 2673 /* it is not enabled, try to enable it */ 2674 if (all) 2675 ht_enable_msi_mapping(dev); 2676 else 2677 nv_ht_enable_msi_mapping(dev); 2678 } 2679 goto out; 2680 } 2681 2682 /* HT MSI is not enabled */ 2683 if (found == 1) 2684 goto out; 2685 2686 /* Host bridge is not to HT, disable HT MSI mapping on this device */ 2687 ht_disable_msi_mapping(dev); 2688 2689 out: 2690 pci_dev_put(host_bridge); 2691 } 2692 2693 static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) 2694 { 2695 return __nv_msi_ht_cap_quirk(dev, 1); 2696 } 2697 2698 static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) 2699 { 2700 return __nv_msi_ht_cap_quirk(dev, 0); 2701 } 2702 2703 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2704 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2705 2706 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2707 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2708 2709 static void quirk_msi_intx_disable_bug(struct pci_dev *dev) 2710 { 2711 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2712 } 2713 static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) 2714 { 2715 struct pci_dev *p; 2716 2717 /* SB700 MSI issue will be fixed at HW level from revision A21, 2718 * we need check PCI REVISION ID of SMBus controller to get SB700 2719 * revision. 2720 */ 2721 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, 2722 NULL); 2723 if (!p) 2724 return; 2725 2726 if ((p->revision < 0x3B) && (p->revision >= 0x30)) 2727 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2728 pci_dev_put(p); 2729 } 2730 static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) 2731 { 2732 /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ 2733 if (dev->revision < 0x18) { 2734 dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); 2735 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2736 } 2737 } 2738 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2739 PCI_DEVICE_ID_TIGON3_5780, 2740 quirk_msi_intx_disable_bug); 2741 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2742 PCI_DEVICE_ID_TIGON3_5780S, 2743 quirk_msi_intx_disable_bug); 2744 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2745 PCI_DEVICE_ID_TIGON3_5714, 2746 quirk_msi_intx_disable_bug); 2747 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2748 PCI_DEVICE_ID_TIGON3_5714S, 2749 quirk_msi_intx_disable_bug); 2750 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2751 PCI_DEVICE_ID_TIGON3_5715, 2752 quirk_msi_intx_disable_bug); 2753 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2754 PCI_DEVICE_ID_TIGON3_5715S, 2755 quirk_msi_intx_disable_bug); 2756 2757 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, 2758 quirk_msi_intx_disable_ati_bug); 2759 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, 2760 quirk_msi_intx_disable_ati_bug); 2761 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, 2762 quirk_msi_intx_disable_ati_bug); 2763 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, 2764 quirk_msi_intx_disable_ati_bug); 2765 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, 2766 quirk_msi_intx_disable_ati_bug); 2767 2768 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, 2769 quirk_msi_intx_disable_bug); 2770 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, 2771 quirk_msi_intx_disable_bug); 2772 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, 2773 quirk_msi_intx_disable_bug); 2774 2775 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, 2776 quirk_msi_intx_disable_bug); 2777 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, 2778 quirk_msi_intx_disable_bug); 2779 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, 2780 quirk_msi_intx_disable_bug); 2781 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, 2782 quirk_msi_intx_disable_bug); 2783 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, 2784 quirk_msi_intx_disable_bug); 2785 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, 2786 quirk_msi_intx_disable_bug); 2787 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, 2788 quirk_msi_intx_disable_qca_bug); 2789 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, 2790 quirk_msi_intx_disable_qca_bug); 2791 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, 2792 quirk_msi_intx_disable_qca_bug); 2793 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, 2794 quirk_msi_intx_disable_qca_bug); 2795 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, 2796 quirk_msi_intx_disable_qca_bug); 2797 #endif /* CONFIG_PCI_MSI */ 2798 2799 /* Allow manual resource allocation for PCI hotplug bridges 2800 * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For 2801 * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), 2802 * kernel fails to allocate resources when hotplug device is 2803 * inserted and PCI bus is rescanned. 2804 */ 2805 static void quirk_hotplug_bridge(struct pci_dev *dev) 2806 { 2807 dev->is_hotplug_bridge = 1; 2808 } 2809 2810 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); 2811 2812 /* 2813 * This is a quirk for the Ricoh MMC controller found as a part of 2814 * some mulifunction chips. 2815 2816 * This is very similar and based on the ricoh_mmc driver written by 2817 * Philip Langdale. Thank you for these magic sequences. 2818 * 2819 * These chips implement the four main memory card controllers (SD, MMC, MS, xD) 2820 * and one or both of cardbus or firewire. 2821 * 2822 * It happens that they implement SD and MMC 2823 * support as separate controllers (and PCI functions). The linux SDHCI 2824 * driver supports MMC cards but the chip detects MMC cards in hardware 2825 * and directs them to the MMC controller - so the SDHCI driver never sees 2826 * them. 2827 * 2828 * To get around this, we must disable the useless MMC controller. 2829 * At that point, the SDHCI controller will start seeing them 2830 * It seems to be the case that the relevant PCI registers to deactivate the 2831 * MMC controller live on PCI function 0, which might be the cardbus controller 2832 * or the firewire controller, depending on the particular chip in question 2833 * 2834 * This has to be done early, because as soon as we disable the MMC controller 2835 * other pci functions shift up one level, e.g. function #2 becomes function 2836 * #1, and this will confuse the pci core. 2837 */ 2838 2839 #ifdef CONFIG_MMC_RICOH_MMC 2840 static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) 2841 { 2842 /* disable via cardbus interface */ 2843 u8 write_enable; 2844 u8 write_target; 2845 u8 disable; 2846 2847 /* disable must be done via function #0 */ 2848 if (PCI_FUNC(dev->devfn)) 2849 return; 2850 2851 pci_read_config_byte(dev, 0xB7, &disable); 2852 if (disable & 0x02) 2853 return; 2854 2855 pci_read_config_byte(dev, 0x8E, &write_enable); 2856 pci_write_config_byte(dev, 0x8E, 0xAA); 2857 pci_read_config_byte(dev, 0x8D, &write_target); 2858 pci_write_config_byte(dev, 0x8D, 0xB7); 2859 pci_write_config_byte(dev, 0xB7, disable | 0x02); 2860 pci_write_config_byte(dev, 0x8E, write_enable); 2861 pci_write_config_byte(dev, 0x8D, write_target); 2862 2863 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); 2864 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2865 } 2866 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2867 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2868 2869 static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) 2870 { 2871 /* disable via firewire interface */ 2872 u8 write_enable; 2873 u8 disable; 2874 2875 /* disable must be done via function #0 */ 2876 if (PCI_FUNC(dev->devfn)) 2877 return; 2878 /* 2879 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize 2880 * certain types of SD/MMC cards. Lowering the SD base 2881 * clock frequency from 200Mhz to 50Mhz fixes this issue. 2882 * 2883 * 0x150 - SD2.0 mode enable for changing base clock 2884 * frequency to 50Mhz 2885 * 0xe1 - Base clock frequency 2886 * 0x32 - 50Mhz new clock frequency 2887 * 0xf9 - Key register for 0x150 2888 * 0xfc - key register for 0xe1 2889 */ 2890 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || 2891 dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { 2892 pci_write_config_byte(dev, 0xf9, 0xfc); 2893 pci_write_config_byte(dev, 0x150, 0x10); 2894 pci_write_config_byte(dev, 0xf9, 0x00); 2895 pci_write_config_byte(dev, 0xfc, 0x01); 2896 pci_write_config_byte(dev, 0xe1, 0x32); 2897 pci_write_config_byte(dev, 0xfc, 0x00); 2898 2899 dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); 2900 } 2901 2902 pci_read_config_byte(dev, 0xCB, &disable); 2903 2904 if (disable & 0x02) 2905 return; 2906 2907 pci_read_config_byte(dev, 0xCA, &write_enable); 2908 pci_write_config_byte(dev, 0xCA, 0x57); 2909 pci_write_config_byte(dev, 0xCB, disable | 0x02); 2910 pci_write_config_byte(dev, 0xCA, write_enable); 2911 2912 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); 2913 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2914 2915 } 2916 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2917 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2918 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2919 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2920 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2921 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2922 #endif /*CONFIG_MMC_RICOH_MMC*/ 2923 2924 #ifdef CONFIG_DMAR_TABLE 2925 #define VTUNCERRMSK_REG 0x1ac 2926 #define VTD_MSK_SPEC_ERRORS (1 << 31) 2927 /* 2928 * This is a quirk for masking vt-d spec defined errors to platform error 2929 * handling logic. With out this, platforms using Intel 7500, 5500 chipsets 2930 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based 2931 * on the RAS config settings of the platform) when a vt-d fault happens. 2932 * The resulting SMI caused the system to hang. 2933 * 2934 * VT-d spec related errors are already handled by the VT-d OS code, so no 2935 * need to report the same error through other channels. 2936 */ 2937 static void vtd_mask_spec_errors(struct pci_dev *dev) 2938 { 2939 u32 word; 2940 2941 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); 2942 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); 2943 } 2944 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); 2945 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); 2946 #endif 2947 2948 static void fixup_ti816x_class(struct pci_dev *dev) 2949 { 2950 u32 class = dev->class; 2951 2952 /* TI 816x devices do not have class code set when in PCIe boot mode */ 2953 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; 2954 dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n", 2955 class, dev->class); 2956 } 2957 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, 2958 PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); 2959 2960 /* Some PCIe devices do not work reliably with the claimed maximum 2961 * payload size supported. 2962 */ 2963 static void fixup_mpss_256(struct pci_dev *dev) 2964 { 2965 dev->pcie_mpss = 1; /* 256 bytes */ 2966 } 2967 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2968 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); 2969 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2970 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); 2971 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2972 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); 2973 2974 /* Intel 5000 and 5100 Memory controllers have an errata with read completion 2975 * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. 2976 * Since there is no way of knowing what the PCIE MPS on each fabric will be 2977 * until all of the devices are discovered and buses walked, read completion 2978 * coalescing must be disabled. Unfortunately, it cannot be re-enabled because 2979 * it is possible to hotplug a device with MPS of 256B. 2980 */ 2981 static void quirk_intel_mc_errata(struct pci_dev *dev) 2982 { 2983 int err; 2984 u16 rcc; 2985 2986 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 2987 pcie_bus_config == PCIE_BUS_DEFAULT) 2988 return; 2989 2990 /* Intel errata specifies bits to change but does not say what they are. 2991 * Keeping them magical until such time as the registers and values can 2992 * be explained. 2993 */ 2994 err = pci_read_config_word(dev, 0x48, &rcc); 2995 if (err) { 2996 dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); 2997 return; 2998 } 2999 3000 if (!(rcc & (1 << 10))) 3001 return; 3002 3003 rcc &= ~(1 << 10); 3004 3005 err = pci_write_config_word(dev, 0x48, rcc); 3006 if (err) { 3007 dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); 3008 return; 3009 } 3010 3011 pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); 3012 } 3013 /* Intel 5000 series memory controllers and ports 2-7 */ 3014 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); 3015 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); 3016 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); 3017 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); 3018 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); 3019 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); 3020 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); 3021 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); 3022 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); 3023 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); 3024 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); 3025 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); 3026 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); 3027 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); 3028 /* Intel 5100 series memory controllers and ports 2-7 */ 3029 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); 3030 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); 3031 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); 3032 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); 3033 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); 3034 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); 3035 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); 3036 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); 3037 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); 3038 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); 3039 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); 3040 3041 3042 /* 3043 * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To 3044 * work around this, query the size it should be configured to by the device and 3045 * modify the resource end to correspond to this new size. 3046 */ 3047 static void quirk_intel_ntb(struct pci_dev *dev) 3048 { 3049 int rc; 3050 u8 val; 3051 3052 rc = pci_read_config_byte(dev, 0x00D0, &val); 3053 if (rc) 3054 return; 3055 3056 dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; 3057 3058 rc = pci_read_config_byte(dev, 0x00D1, &val); 3059 if (rc) 3060 return; 3061 3062 dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; 3063 } 3064 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); 3065 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); 3066 3067 static ktime_t fixup_debug_start(struct pci_dev *dev, 3068 void (*fn)(struct pci_dev *dev)) 3069 { 3070 ktime_t calltime = 0; 3071 3072 dev_dbg(&dev->dev, "calling %pF\n", fn); 3073 if (initcall_debug) { 3074 pr_debug("calling %pF @ %i for %s\n", 3075 fn, task_pid_nr(current), dev_name(&dev->dev)); 3076 calltime = ktime_get(); 3077 } 3078 3079 return calltime; 3080 } 3081 3082 static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, 3083 void (*fn)(struct pci_dev *dev)) 3084 { 3085 ktime_t delta, rettime; 3086 unsigned long long duration; 3087 3088 if (initcall_debug) { 3089 rettime = ktime_get(); 3090 delta = ktime_sub(rettime, calltime); 3091 duration = (unsigned long long) ktime_to_ns(delta) >> 10; 3092 pr_debug("pci fixup %pF returned after %lld usecs for %s\n", 3093 fn, duration, dev_name(&dev->dev)); 3094 } 3095 } 3096 3097 /* 3098 * Some BIOS implementations leave the Intel GPU interrupts enabled, 3099 * even though no one is handling them (f.e. i915 driver is never loaded). 3100 * Additionally the interrupt destination is not set up properly 3101 * and the interrupt ends up -somewhere-. 3102 * 3103 * These spurious interrupts are "sticky" and the kernel disables 3104 * the (shared) interrupt line after 100.000+ generated interrupts. 3105 * 3106 * Fix it by disabling the still enabled interrupts. 3107 * This resolves crashes often seen on monitor unplug. 3108 */ 3109 #define I915_DEIER_REG 0x4400c 3110 static void disable_igfx_irq(struct pci_dev *dev) 3111 { 3112 void __iomem *regs = pci_iomap(dev, 0, 0); 3113 if (regs == NULL) { 3114 dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); 3115 return; 3116 } 3117 3118 /* Check if any interrupt line is still enabled */ 3119 if (readl(regs + I915_DEIER_REG) != 0) { 3120 dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); 3121 3122 writel(0, regs + I915_DEIER_REG); 3123 } 3124 3125 pci_iounmap(dev, regs); 3126 } 3127 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); 3128 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); 3129 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); 3130 3131 /* 3132 * PCI devices which are on Intel chips can skip the 10ms delay 3133 * before entering D3 mode. 3134 */ 3135 static void quirk_remove_d3_delay(struct pci_dev *dev) 3136 { 3137 dev->d3_delay = 0; 3138 } 3139 /* C600 Series devices do not need 10ms d3_delay */ 3140 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); 3141 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); 3142 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); 3143 /* Lynxpoint-H PCH devices do not need 10ms d3_delay */ 3144 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); 3145 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); 3146 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); 3147 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); 3148 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); 3149 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); 3150 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); 3151 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); 3152 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); 3153 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); 3154 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); 3155 /* Intel Cherrytrail devices do not need 10ms d3_delay */ 3156 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); 3157 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); 3158 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); 3159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); 3160 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); 3161 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); 3162 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); 3163 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); 3164 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); 3165 3166 /* 3167 * Some devices may pass our check in pci_intx_mask_supported() if 3168 * PCI_COMMAND_INTX_DISABLE works though they actually do not properly 3169 * support this feature. 3170 */ 3171 static void quirk_broken_intx_masking(struct pci_dev *dev) 3172 { 3173 dev->broken_intx_masking = 1; 3174 } 3175 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030, 3176 quirk_broken_intx_masking); 3177 DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ 3178 quirk_broken_intx_masking); 3179 3180 /* 3181 * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) 3182 * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC 3183 * 3184 * RTL8110SC - Fails under PCI device assignment using DisINTx masking. 3185 */ 3186 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169, 3187 quirk_broken_intx_masking); 3188 3189 /* 3190 * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking, 3191 * DisINTx can be set but the interrupt status bit is non-functional. 3192 */ 3193 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, 3194 quirk_broken_intx_masking); 3195 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, 3196 quirk_broken_intx_masking); 3197 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, 3198 quirk_broken_intx_masking); 3199 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, 3200 quirk_broken_intx_masking); 3201 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, 3202 quirk_broken_intx_masking); 3203 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, 3204 quirk_broken_intx_masking); 3205 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, 3206 quirk_broken_intx_masking); 3207 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, 3208 quirk_broken_intx_masking); 3209 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, 3210 quirk_broken_intx_masking); 3211 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, 3212 quirk_broken_intx_masking); 3213 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, 3214 quirk_broken_intx_masking); 3215 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, 3216 quirk_broken_intx_masking); 3217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, 3218 quirk_broken_intx_masking); 3219 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, 3220 quirk_broken_intx_masking); 3221 3222 static u16 mellanox_broken_intx_devs[] = { 3223 PCI_DEVICE_ID_MELLANOX_HERMON_SDR, 3224 PCI_DEVICE_ID_MELLANOX_HERMON_DDR, 3225 PCI_DEVICE_ID_MELLANOX_HERMON_QDR, 3226 PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2, 3227 PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2, 3228 PCI_DEVICE_ID_MELLANOX_HERMON_EN, 3229 PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2, 3230 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN, 3231 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2, 3232 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2, 3233 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2, 3234 PCI_DEVICE_ID_MELLANOX_CONNECTX2, 3235 PCI_DEVICE_ID_MELLANOX_CONNECTX3, 3236 PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO, 3237 }; 3238 3239 #define CONNECTX_4_CURR_MAX_MINOR 99 3240 #define CONNECTX_4_INTX_SUPPORT_MINOR 14 3241 3242 /* 3243 * Check ConnectX-4/LX FW version to see if it supports legacy interrupts. 3244 * If so, don't mark it as broken. 3245 * FW minor > 99 means older FW version format and no INTx masking support. 3246 * FW minor < 14 means new FW version format and no INTx masking support. 3247 */ 3248 static void mellanox_check_broken_intx_masking(struct pci_dev *pdev) 3249 { 3250 __be32 __iomem *fw_ver; 3251 u16 fw_major; 3252 u16 fw_minor; 3253 u16 fw_subminor; 3254 u32 fw_maj_min; 3255 u32 fw_sub_min; 3256 int i; 3257 3258 for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) { 3259 if (pdev->device == mellanox_broken_intx_devs[i]) { 3260 pdev->broken_intx_masking = 1; 3261 return; 3262 } 3263 } 3264 3265 /* Getting here means Connect-IB cards and up. Connect-IB has no INTx 3266 * support so shouldn't be checked further 3267 */ 3268 if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB) 3269 return; 3270 3271 if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 && 3272 pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX) 3273 return; 3274 3275 /* For ConnectX-4 and ConnectX-4LX, need to check FW support */ 3276 if (pci_enable_device_mem(pdev)) { 3277 dev_warn(&pdev->dev, "Can't enable device memory\n"); 3278 return; 3279 } 3280 3281 fw_ver = ioremap(pci_resource_start(pdev, 0), 4); 3282 if (!fw_ver) { 3283 dev_warn(&pdev->dev, "Can't map ConnectX-4 initialization segment\n"); 3284 goto out; 3285 } 3286 3287 /* Reading from resource space should be 32b aligned */ 3288 fw_maj_min = ioread32be(fw_ver); 3289 fw_sub_min = ioread32be(fw_ver + 1); 3290 fw_major = fw_maj_min & 0xffff; 3291 fw_minor = fw_maj_min >> 16; 3292 fw_subminor = fw_sub_min & 0xffff; 3293 if (fw_minor > CONNECTX_4_CURR_MAX_MINOR || 3294 fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) { 3295 dev_warn(&pdev->dev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n", 3296 fw_major, fw_minor, fw_subminor, pdev->device == 3297 PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14); 3298 pdev->broken_intx_masking = 1; 3299 } 3300 3301 iounmap(fw_ver); 3302 3303 out: 3304 pci_disable_device(pdev); 3305 } 3306 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, 3307 mellanox_check_broken_intx_masking); 3308 3309 static void quirk_no_bus_reset(struct pci_dev *dev) 3310 { 3311 dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; 3312 } 3313 3314 /* 3315 * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset. 3316 * The device will throw a Link Down error on AER-capable systems and 3317 * regardless of AER, config space of the device is never accessible again 3318 * and typically causes the system to hang or reset when access is attempted. 3319 * http://www.spinics.net/lists/linux-pci/msg34797.html 3320 */ 3321 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); 3322 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); 3323 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); 3324 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset); 3325 3326 static void quirk_no_pm_reset(struct pci_dev *dev) 3327 { 3328 /* 3329 * We can't do a bus reset on root bus devices, but an ineffective 3330 * PM reset may be better than nothing. 3331 */ 3332 if (!pci_is_root_bus(dev->bus)) 3333 dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; 3334 } 3335 3336 /* 3337 * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition 3338 * causes a reset (i.e., they advertise NoSoftRst-). This transition seems 3339 * to have no effect on the device: it retains the framebuffer contents and 3340 * monitor sync. Advertising this support makes other layers, like VFIO, 3341 * assume pci_reset_function() is viable for this device. Mark it as 3342 * unavailable to skip it when testing reset methods. 3343 */ 3344 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 3345 PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); 3346 3347 /* 3348 * Thunderbolt controllers with broken MSI hotplug signaling: 3349 * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part 3350 * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge). 3351 */ 3352 static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev) 3353 { 3354 if (pdev->is_hotplug_bridge && 3355 (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C || 3356 pdev->revision <= 1)) 3357 pdev->no_msi = 1; 3358 } 3359 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3360 quirk_thunderbolt_hotplug_msi); 3361 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE, 3362 quirk_thunderbolt_hotplug_msi); 3363 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK, 3364 quirk_thunderbolt_hotplug_msi); 3365 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3366 quirk_thunderbolt_hotplug_msi); 3367 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, 3368 quirk_thunderbolt_hotplug_msi); 3369 3370 static void quirk_chelsio_extend_vpd(struct pci_dev *dev) 3371 { 3372 pci_set_vpd_size(dev, 8192); 3373 } 3374 3375 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x20, quirk_chelsio_extend_vpd); 3376 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x21, quirk_chelsio_extend_vpd); 3377 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x22, quirk_chelsio_extend_vpd); 3378 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x23, quirk_chelsio_extend_vpd); 3379 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x24, quirk_chelsio_extend_vpd); 3380 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x25, quirk_chelsio_extend_vpd); 3381 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x26, quirk_chelsio_extend_vpd); 3382 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x30, quirk_chelsio_extend_vpd); 3383 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x31, quirk_chelsio_extend_vpd); 3384 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x32, quirk_chelsio_extend_vpd); 3385 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x35, quirk_chelsio_extend_vpd); 3386 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x36, quirk_chelsio_extend_vpd); 3387 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x37, quirk_chelsio_extend_vpd); 3388 3389 #ifdef CONFIG_ACPI 3390 /* 3391 * Apple: Shutdown Cactus Ridge Thunderbolt controller. 3392 * 3393 * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be 3394 * shutdown before suspend. Otherwise the native host interface (NHI) will not 3395 * be present after resume if a device was plugged in before suspend. 3396 * 3397 * The thunderbolt controller consists of a pcie switch with downstream 3398 * bridges leading to the NHI and to the tunnel pci bridges. 3399 * 3400 * This quirk cuts power to the whole chip. Therefore we have to apply it 3401 * during suspend_noirq of the upstream bridge. 3402 * 3403 * Power is automagically restored before resume. No action is needed. 3404 */ 3405 static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) 3406 { 3407 acpi_handle bridge, SXIO, SXFP, SXLV; 3408 3409 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3410 return; 3411 if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) 3412 return; 3413 bridge = ACPI_HANDLE(&dev->dev); 3414 if (!bridge) 3415 return; 3416 /* 3417 * SXIO and SXLV are present only on machines requiring this quirk. 3418 * TB bridges in external devices might have the same device id as those 3419 * on the host, but they will not have the associated ACPI methods. This 3420 * implicitly checks that we are at the right bridge. 3421 */ 3422 if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) 3423 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) 3424 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) 3425 return; 3426 dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); 3427 3428 /* magic sequence */ 3429 acpi_execute_simple_method(SXIO, NULL, 1); 3430 acpi_execute_simple_method(SXFP, NULL, 0); 3431 msleep(300); 3432 acpi_execute_simple_method(SXLV, NULL, 0); 3433 acpi_execute_simple_method(SXIO, NULL, 0); 3434 acpi_execute_simple_method(SXLV, NULL, 0); 3435 } 3436 DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 3437 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3438 quirk_apple_poweroff_thunderbolt); 3439 3440 /* 3441 * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. 3442 * 3443 * During suspend the thunderbolt controller is reset and all pci 3444 * tunnels are lost. The NHI driver will try to reestablish all tunnels 3445 * during resume. We have to manually wait for the NHI since there is 3446 * no parent child relationship between the NHI and the tunneled 3447 * bridges. 3448 */ 3449 static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) 3450 { 3451 struct pci_dev *sibling = NULL; 3452 struct pci_dev *nhi = NULL; 3453 3454 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3455 return; 3456 if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) 3457 return; 3458 /* 3459 * Find the NHI and confirm that we are a bridge on the tb host 3460 * controller and not on a tb endpoint. 3461 */ 3462 sibling = pci_get_slot(dev->bus, 0x0); 3463 if (sibling == dev) 3464 goto out; /* we are the downstream bridge to the NHI */ 3465 if (!sibling || !sibling->subordinate) 3466 goto out; 3467 nhi = pci_get_slot(sibling->subordinate, 0x0); 3468 if (!nhi) 3469 goto out; 3470 if (nhi->vendor != PCI_VENDOR_ID_INTEL 3471 || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && 3472 nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && 3473 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && 3474 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) 3475 || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) 3476 goto out; 3477 dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); 3478 device_pm_wait_for_dev(&dev->dev, &nhi->dev); 3479 out: 3480 pci_dev_put(nhi); 3481 pci_dev_put(sibling); 3482 } 3483 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3484 PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3485 quirk_apple_wait_for_thunderbolt); 3486 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3487 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3488 quirk_apple_wait_for_thunderbolt); 3489 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3490 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, 3491 quirk_apple_wait_for_thunderbolt); 3492 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3493 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, 3494 quirk_apple_wait_for_thunderbolt); 3495 #endif 3496 3497 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, 3498 struct pci_fixup *end) 3499 { 3500 ktime_t calltime; 3501 3502 for (; f < end; f++) 3503 if ((f->class == (u32) (dev->class >> f->class_shift) || 3504 f->class == (u32) PCI_ANY_ID) && 3505 (f->vendor == dev->vendor || 3506 f->vendor == (u16) PCI_ANY_ID) && 3507 (f->device == dev->device || 3508 f->device == (u16) PCI_ANY_ID)) { 3509 calltime = fixup_debug_start(dev, f->hook); 3510 f->hook(dev); 3511 fixup_debug_report(dev, calltime, f->hook); 3512 } 3513 } 3514 3515 extern struct pci_fixup __start_pci_fixups_early[]; 3516 extern struct pci_fixup __end_pci_fixups_early[]; 3517 extern struct pci_fixup __start_pci_fixups_header[]; 3518 extern struct pci_fixup __end_pci_fixups_header[]; 3519 extern struct pci_fixup __start_pci_fixups_final[]; 3520 extern struct pci_fixup __end_pci_fixups_final[]; 3521 extern struct pci_fixup __start_pci_fixups_enable[]; 3522 extern struct pci_fixup __end_pci_fixups_enable[]; 3523 extern struct pci_fixup __start_pci_fixups_resume[]; 3524 extern struct pci_fixup __end_pci_fixups_resume[]; 3525 extern struct pci_fixup __start_pci_fixups_resume_early[]; 3526 extern struct pci_fixup __end_pci_fixups_resume_early[]; 3527 extern struct pci_fixup __start_pci_fixups_suspend[]; 3528 extern struct pci_fixup __end_pci_fixups_suspend[]; 3529 extern struct pci_fixup __start_pci_fixups_suspend_late[]; 3530 extern struct pci_fixup __end_pci_fixups_suspend_late[]; 3531 3532 static bool pci_apply_fixup_final_quirks; 3533 3534 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) 3535 { 3536 struct pci_fixup *start, *end; 3537 3538 switch (pass) { 3539 case pci_fixup_early: 3540 start = __start_pci_fixups_early; 3541 end = __end_pci_fixups_early; 3542 break; 3543 3544 case pci_fixup_header: 3545 start = __start_pci_fixups_header; 3546 end = __end_pci_fixups_header; 3547 break; 3548 3549 case pci_fixup_final: 3550 if (!pci_apply_fixup_final_quirks) 3551 return; 3552 start = __start_pci_fixups_final; 3553 end = __end_pci_fixups_final; 3554 break; 3555 3556 case pci_fixup_enable: 3557 start = __start_pci_fixups_enable; 3558 end = __end_pci_fixups_enable; 3559 break; 3560 3561 case pci_fixup_resume: 3562 start = __start_pci_fixups_resume; 3563 end = __end_pci_fixups_resume; 3564 break; 3565 3566 case pci_fixup_resume_early: 3567 start = __start_pci_fixups_resume_early; 3568 end = __end_pci_fixups_resume_early; 3569 break; 3570 3571 case pci_fixup_suspend: 3572 start = __start_pci_fixups_suspend; 3573 end = __end_pci_fixups_suspend; 3574 break; 3575 3576 case pci_fixup_suspend_late: 3577 start = __start_pci_fixups_suspend_late; 3578 end = __end_pci_fixups_suspend_late; 3579 break; 3580 3581 default: 3582 /* stupid compiler warning, you would think with an enum... */ 3583 return; 3584 } 3585 pci_do_fixups(dev, start, end); 3586 } 3587 EXPORT_SYMBOL(pci_fixup_device); 3588 3589 3590 static int __init pci_apply_final_quirks(void) 3591 { 3592 struct pci_dev *dev = NULL; 3593 u8 cls = 0; 3594 u8 tmp; 3595 3596 if (pci_cache_line_size) 3597 printk(KERN_DEBUG "PCI: CLS %u bytes\n", 3598 pci_cache_line_size << 2); 3599 3600 pci_apply_fixup_final_quirks = true; 3601 for_each_pci_dev(dev) { 3602 pci_fixup_device(pci_fixup_final, dev); 3603 /* 3604 * If arch hasn't set it explicitly yet, use the CLS 3605 * value shared by all PCI devices. If there's a 3606 * mismatch, fall back to the default value. 3607 */ 3608 if (!pci_cache_line_size) { 3609 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); 3610 if (!cls) 3611 cls = tmp; 3612 if (!tmp || cls == tmp) 3613 continue; 3614 3615 printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", 3616 cls << 2, tmp << 2, 3617 pci_dfl_cache_line_size << 2); 3618 pci_cache_line_size = pci_dfl_cache_line_size; 3619 } 3620 } 3621 3622 if (!pci_cache_line_size) { 3623 printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", 3624 cls << 2, pci_dfl_cache_line_size << 2); 3625 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; 3626 } 3627 3628 return 0; 3629 } 3630 3631 fs_initcall_sync(pci_apply_final_quirks); 3632 3633 /* 3634 * Following are device-specific reset methods which can be used to 3635 * reset a single function if other methods (e.g. FLR, PM D0->D3) are 3636 * not available. 3637 */ 3638 static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) 3639 { 3640 /* 3641 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf 3642 * 3643 * The 82599 supports FLR on VFs, but FLR support is reported only 3644 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). 3645 * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. 3646 */ 3647 3648 if (probe) 3649 return 0; 3650 3651 if (!pci_wait_for_pending_transaction(dev)) 3652 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3653 3654 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3655 3656 msleep(100); 3657 3658 return 0; 3659 } 3660 3661 #define SOUTH_CHICKEN2 0xc2004 3662 #define PCH_PP_STATUS 0xc7200 3663 #define PCH_PP_CONTROL 0xc7204 3664 #define MSG_CTL 0x45010 3665 #define NSDE_PWR_STATE 0xd0100 3666 #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ 3667 3668 static int reset_ivb_igd(struct pci_dev *dev, int probe) 3669 { 3670 void __iomem *mmio_base; 3671 unsigned long timeout; 3672 u32 val; 3673 3674 if (probe) 3675 return 0; 3676 3677 mmio_base = pci_iomap(dev, 0, 0); 3678 if (!mmio_base) 3679 return -ENOMEM; 3680 3681 iowrite32(0x00000002, mmio_base + MSG_CTL); 3682 3683 /* 3684 * Clobbering SOUTH_CHICKEN2 register is fine only if the next 3685 * driver loaded sets the right bits. However, this's a reset and 3686 * the bits have been set by i915 previously, so we clobber 3687 * SOUTH_CHICKEN2 register directly here. 3688 */ 3689 iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); 3690 3691 val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; 3692 iowrite32(val, mmio_base + PCH_PP_CONTROL); 3693 3694 timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); 3695 do { 3696 val = ioread32(mmio_base + PCH_PP_STATUS); 3697 if ((val & 0xb0000000) == 0) 3698 goto reset_complete; 3699 msleep(10); 3700 } while (time_before(jiffies, timeout)); 3701 dev_warn(&dev->dev, "timeout during reset\n"); 3702 3703 reset_complete: 3704 iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); 3705 3706 pci_iounmap(dev, mmio_base); 3707 return 0; 3708 } 3709 3710 /* 3711 * Device-specific reset method for Chelsio T4-based adapters. 3712 */ 3713 static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) 3714 { 3715 u16 old_command; 3716 u16 msix_flags; 3717 3718 /* 3719 * If this isn't a Chelsio T4-based device, return -ENOTTY indicating 3720 * that we have no device-specific reset method. 3721 */ 3722 if ((dev->device & 0xf000) != 0x4000) 3723 return -ENOTTY; 3724 3725 /* 3726 * If this is the "probe" phase, return 0 indicating that we can 3727 * reset this device. 3728 */ 3729 if (probe) 3730 return 0; 3731 3732 /* 3733 * T4 can wedge if there are DMAs in flight within the chip and Bus 3734 * Master has been disabled. We need to have it on till the Function 3735 * Level Reset completes. (BUS_MASTER is disabled in 3736 * pci_reset_function()). 3737 */ 3738 pci_read_config_word(dev, PCI_COMMAND, &old_command); 3739 pci_write_config_word(dev, PCI_COMMAND, 3740 old_command | PCI_COMMAND_MASTER); 3741 3742 /* 3743 * Perform the actual device function reset, saving and restoring 3744 * configuration information around the reset. 3745 */ 3746 pci_save_state(dev); 3747 3748 /* 3749 * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts 3750 * are disabled when an MSI-X interrupt message needs to be delivered. 3751 * So we briefly re-enable MSI-X interrupts for the duration of the 3752 * FLR. The pci_restore_state() below will restore the original 3753 * MSI-X state. 3754 */ 3755 pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); 3756 if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) 3757 pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, 3758 msix_flags | 3759 PCI_MSIX_FLAGS_ENABLE | 3760 PCI_MSIX_FLAGS_MASKALL); 3761 3762 /* 3763 * Start of pcie_flr() code sequence. This reset code is a copy of 3764 * the guts of pcie_flr() because that's not an exported function. 3765 */ 3766 3767 if (!pci_wait_for_pending_transaction(dev)) 3768 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3769 3770 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3771 msleep(100); 3772 3773 /* 3774 * End of pcie_flr() code sequence. 3775 */ 3776 3777 /* 3778 * Restore the configuration information (BAR values, etc.) including 3779 * the original PCI Configuration Space Command word, and return 3780 * success. 3781 */ 3782 pci_restore_state(dev); 3783 pci_write_config_word(dev, PCI_COMMAND, old_command); 3784 return 0; 3785 } 3786 3787 #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed 3788 #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 3789 #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 3790 3791 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { 3792 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, 3793 reset_intel_82599_sfp_virtfn }, 3794 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, 3795 reset_ivb_igd }, 3796 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, 3797 reset_ivb_igd }, 3798 { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 3799 reset_chelsio_generic_dev }, 3800 { 0 } 3801 }; 3802 3803 /* 3804 * These device-specific reset methods are here rather than in a driver 3805 * because when a host assigns a device to a guest VM, the host may need 3806 * to reset the device but probably doesn't have a driver for it. 3807 */ 3808 int pci_dev_specific_reset(struct pci_dev *dev, int probe) 3809 { 3810 const struct pci_dev_reset_methods *i; 3811 3812 for (i = pci_dev_reset_methods; i->reset; i++) { 3813 if ((i->vendor == dev->vendor || 3814 i->vendor == (u16)PCI_ANY_ID) && 3815 (i->device == dev->device || 3816 i->device == (u16)PCI_ANY_ID)) 3817 return i->reset(dev, probe); 3818 } 3819 3820 return -ENOTTY; 3821 } 3822 3823 static void quirk_dma_func0_alias(struct pci_dev *dev) 3824 { 3825 if (PCI_FUNC(dev->devfn) != 0) 3826 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); 3827 } 3828 3829 /* 3830 * https://bugzilla.redhat.com/show_bug.cgi?id=605888 3831 * 3832 * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. 3833 */ 3834 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); 3835 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); 3836 3837 static void quirk_dma_func1_alias(struct pci_dev *dev) 3838 { 3839 if (PCI_FUNC(dev->devfn) != 1) 3840 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1)); 3841 } 3842 3843 /* 3844 * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some 3845 * SKUs function 1 is present and is a legacy IDE controller, in other 3846 * SKUs this function is not present, making this a ghost requester. 3847 * https://bugzilla.kernel.org/show_bug.cgi?id=42679 3848 */ 3849 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, 3850 quirk_dma_func1_alias); 3851 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, 3852 quirk_dma_func1_alias); 3853 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ 3854 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, 3855 quirk_dma_func1_alias); 3856 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ 3857 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, 3858 quirk_dma_func1_alias); 3859 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ 3860 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, 3861 quirk_dma_func1_alias); 3862 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */ 3863 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, 3864 quirk_dma_func1_alias); 3865 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ 3866 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, 3867 quirk_dma_func1_alias); 3868 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ 3869 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, 3870 quirk_dma_func1_alias); 3871 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, 3872 quirk_dma_func1_alias); 3873 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ 3874 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, 3875 PCI_DEVICE_ID_JMICRON_JMB388_ESD, 3876 quirk_dma_func1_alias); 3877 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */ 3878 DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */ 3879 0x0122, /* Plextor M6E (Marvell 88SS9183)*/ 3880 quirk_dma_func1_alias); 3881 3882 /* 3883 * Some devices DMA with the wrong devfn, not just the wrong function. 3884 * quirk_fixed_dma_alias() uses this table to create fixed aliases, where 3885 * the alias is "fixed" and independent of the device devfn. 3886 * 3887 * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O 3888 * processor. To software, this appears as a PCIe-to-PCI/X bridge with a 3889 * single device on the secondary bus. In reality, the single exposed 3890 * device at 0e.0 is the Address Translation Unit (ATU) of the controller 3891 * that provides a bridge to the internal bus of the I/O processor. The 3892 * controller supports private devices, which can be hidden from PCI config 3893 * space. In the case of the Adaptec 3405, a private device at 01.0 3894 * appears to be the DMA engine, which therefore needs to become a DMA 3895 * alias for the device. 3896 */ 3897 static const struct pci_device_id fixed_dma_alias_tbl[] = { 3898 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 3899 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ 3900 .driver_data = PCI_DEVFN(1, 0) }, 3901 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 3902 PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */ 3903 .driver_data = PCI_DEVFN(1, 0) }, 3904 { 0 } 3905 }; 3906 3907 static void quirk_fixed_dma_alias(struct pci_dev *dev) 3908 { 3909 const struct pci_device_id *id; 3910 3911 id = pci_match_id(fixed_dma_alias_tbl, dev); 3912 if (id) 3913 pci_add_dma_alias(dev, id->driver_data); 3914 } 3915 3916 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); 3917 3918 /* 3919 * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in 3920 * using the wrong DMA alias for the device. Some of these devices can be 3921 * used as either forward or reverse bridges, so we need to test whether the 3922 * device is operating in the correct mode. We could probably apply this 3923 * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test 3924 * is for a non-root, non-PCIe bridge where the upstream device is PCIe and 3925 * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. 3926 */ 3927 static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) 3928 { 3929 if (!pci_is_root_bus(pdev->bus) && 3930 pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && 3931 !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && 3932 pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) 3933 pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; 3934 } 3935 /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ 3936 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, 3937 quirk_use_pcie_bridge_dma_alias); 3938 /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ 3939 DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); 3940 /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ 3941 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); 3942 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ 3943 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); 3944 3945 /* 3946 * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to 3947 * be added as aliases to the DMA device in order to allow buffer access 3948 * when IOMMU is enabled. Following devfns have to match RIT-LUT table 3949 * programmed in the EEPROM. 3950 */ 3951 static void quirk_mic_x200_dma_alias(struct pci_dev *pdev) 3952 { 3953 pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0)); 3954 pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0)); 3955 pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3)); 3956 } 3957 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias); 3958 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias); 3959 3960 /* 3961 * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) 3962 * class code. Fix it. 3963 */ 3964 static void quirk_tw686x_class(struct pci_dev *pdev) 3965 { 3966 u32 class = pdev->class; 3967 3968 /* Use "Multimedia controller" class */ 3969 pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; 3970 dev_info(&pdev->dev, "TW686x PCI class overridden (%#08x -> %#08x)\n", 3971 class, pdev->class); 3972 } 3973 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, 3974 quirk_tw686x_class); 3975 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, 3976 quirk_tw686x_class); 3977 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, 3978 quirk_tw686x_class); 3979 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, 3980 quirk_tw686x_class); 3981 3982 /* 3983 * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same 3984 * values for the Attribute as were supplied in the header of the 3985 * corresponding Request, except as explicitly allowed when IDO is used." 3986 * 3987 * If a non-compliant device generates a completion with a different 3988 * attribute than the request, the receiver may accept it (which itself 3989 * seems non-compliant based on sec 2.3.2), or it may handle it as a 3990 * Malformed TLP or an Unexpected Completion, which will probably lead to a 3991 * device access timeout. 3992 * 3993 * If the non-compliant device generates completions with zero attributes 3994 * (instead of copying the attributes from the request), we can work around 3995 * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in 3996 * upstream devices so they always generate requests with zero attributes. 3997 * 3998 * This affects other devices under the same Root Port, but since these 3999 * attributes are performance hints, there should be no functional problem. 4000 * 4001 * Note that Configuration Space accesses are never supposed to have TLP 4002 * Attributes, so we're safe waiting till after any Configuration Space 4003 * accesses to do the Root Port fixup. 4004 */ 4005 static void quirk_disable_root_port_attributes(struct pci_dev *pdev) 4006 { 4007 struct pci_dev *root_port = pci_find_pcie_root_port(pdev); 4008 4009 if (!root_port) { 4010 dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); 4011 return; 4012 } 4013 4014 dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", 4015 dev_name(&pdev->dev)); 4016 pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, 4017 PCI_EXP_DEVCTL_RELAX_EN | 4018 PCI_EXP_DEVCTL_NOSNOOP_EN, 0); 4019 } 4020 4021 /* 4022 * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the 4023 * Completion it generates. 4024 */ 4025 static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) 4026 { 4027 /* 4028 * This mask/compare operation selects for Physical Function 4 on a 4029 * T5. We only need to fix up the Root Port once for any of the 4030 * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely 4031 * 0x54xx so we use that one, 4032 */ 4033 if ((pdev->device & 0xff00) == 0x5400) 4034 quirk_disable_root_port_attributes(pdev); 4035 } 4036 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 4037 quirk_chelsio_T5_disable_root_port_attributes); 4038 4039 /* 4040 * AMD has indicated that the devices below do not support peer-to-peer 4041 * in any system where they are found in the southbridge with an AMD 4042 * IOMMU in the system. Multifunction devices that do not support 4043 * peer-to-peer between functions can claim to support a subset of ACS. 4044 * Such devices effectively enable request redirect (RR) and completion 4045 * redirect (CR) since all transactions are redirected to the upstream 4046 * root complex. 4047 * 4048 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 4049 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 4050 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 4051 * 4052 * 1002:4385 SBx00 SMBus Controller 4053 * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller 4054 * 1002:4383 SBx00 Azalia (Intel HDA) 4055 * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller 4056 * 1002:4384 SBx00 PCI to PCI Bridge 4057 * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 4058 * 4059 * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 4060 * 4061 * 1022:780f [AMD] FCH PCI Bridge 4062 * 1022:7809 [AMD] FCH USB OHCI Controller 4063 */ 4064 static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) 4065 { 4066 #ifdef CONFIG_ACPI 4067 struct acpi_table_header *header = NULL; 4068 acpi_status status; 4069 4070 /* Targeting multifunction devices on the SB (appears on root bus) */ 4071 if (!dev->multifunction || !pci_is_root_bus(dev->bus)) 4072 return -ENODEV; 4073 4074 /* The IVRS table describes the AMD IOMMU */ 4075 status = acpi_get_table("IVRS", 0, &header); 4076 if (ACPI_FAILURE(status)) 4077 return -ENODEV; 4078 4079 /* Filter out flags not applicable to multifunction */ 4080 acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); 4081 4082 return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; 4083 #else 4084 return -ENODEV; 4085 #endif 4086 } 4087 4088 static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) 4089 { 4090 /* 4091 * Cavium devices matching this quirk do not perform peer-to-peer 4092 * with other functions, allowing masking out these bits as if they 4093 * were unimplemented in the ACS capability. 4094 */ 4095 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 4096 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 4097 4098 return acs_flags ? 0 : 1; 4099 } 4100 4101 /* 4102 * Many Intel PCH root ports do provide ACS-like features to disable peer 4103 * transactions and validate bus numbers in requests, but do not provide an 4104 * actual PCIe ACS capability. This is the list of device IDs known to fall 4105 * into that category as provided by Intel in Red Hat bugzilla 1037684. 4106 */ 4107 static const u16 pci_quirk_intel_pch_acs_ids[] = { 4108 /* Ibexpeak PCH */ 4109 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, 4110 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, 4111 /* Cougarpoint PCH */ 4112 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, 4113 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, 4114 /* Pantherpoint PCH */ 4115 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, 4116 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, 4117 /* Lynxpoint-H PCH */ 4118 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, 4119 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, 4120 /* Lynxpoint-LP PCH */ 4121 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, 4122 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, 4123 /* Wildcat PCH */ 4124 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, 4125 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, 4126 /* Patsburg (X79) PCH */ 4127 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, 4128 /* Wellsburg (X99) PCH */ 4129 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, 4130 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, 4131 /* Lynx Point (9 series) PCH */ 4132 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, 4133 }; 4134 4135 static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) 4136 { 4137 int i; 4138 4139 /* Filter out a few obvious non-matches first */ 4140 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4141 return false; 4142 4143 for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) 4144 if (pci_quirk_intel_pch_acs_ids[i] == dev->device) 4145 return true; 4146 4147 return false; 4148 } 4149 4150 #define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) 4151 4152 static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) 4153 { 4154 u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? 4155 INTEL_PCH_ACS_FLAGS : 0; 4156 4157 if (!pci_quirk_intel_pch_acs_match(dev)) 4158 return -ENOTTY; 4159 4160 return acs_flags & ~flags ? 0 : 1; 4161 } 4162 4163 /* 4164 * These QCOM root ports do provide ACS-like features to disable peer 4165 * transactions and validate bus numbers in requests, but do not provide an 4166 * actual PCIe ACS capability. Hardware supports source validation but it 4167 * will report the issue as Completer Abort instead of ACS Violation. 4168 * Hardware doesn't support peer-to-peer and each root port is a root 4169 * complex with unique segment numbers. It is not possible for one root 4170 * port to pass traffic to another root port. All PCIe transactions are 4171 * terminated inside the root port. 4172 */ 4173 static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) 4174 { 4175 u16 flags = (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV); 4176 int ret = acs_flags & ~flags ? 0 : 1; 4177 4178 dev_info(&dev->dev, "Using QCOM ACS Quirk (%d)\n", ret); 4179 4180 return ret; 4181 } 4182 4183 /* 4184 * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in 4185 * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, 4186 * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and 4187 * control registers whereas the PCIe spec packs them into words (Rev 3.0, 4188 * 7.16 ACS Extended Capability). The bit definitions are correct, but the 4189 * control register is at offset 8 instead of 6 and we should probably use 4190 * dword accesses to them. This applies to the following PCI Device IDs, as 4191 * found in volume 1 of the datasheet[2]: 4192 * 4193 * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16} 4194 * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20} 4195 * 4196 * N.B. This doesn't fix what lspci shows. 4197 * 4198 * The 100 series chipset specification update includes this as errata #23[3]. 4199 * 4200 * The 200 series chipset (Union Point) has the same bug according to the 4201 * specification update (Intel 200 Series Chipset Family Platform Controller 4202 * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001, 4203 * Errata 22)[4]. Per the datasheet[5], root port PCI Device IDs for this 4204 * chipset include: 4205 * 4206 * 0xa290-0xa29f PCI Express Root port #{0-16} 4207 * 0xa2e7-0xa2ee PCI Express Root port #{17-24} 4208 * 4209 * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html 4210 * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html 4211 * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html 4212 * [4] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html 4213 * [5] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html 4214 */ 4215 static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev) 4216 { 4217 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4218 return false; 4219 4220 switch (dev->device) { 4221 case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */ 4222 case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */ 4223 return true; 4224 } 4225 4226 return false; 4227 } 4228 4229 #define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4) 4230 4231 static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags) 4232 { 4233 int pos; 4234 u32 cap, ctrl; 4235 4236 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4237 return -ENOTTY; 4238 4239 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4240 if (!pos) 4241 return -ENOTTY; 4242 4243 /* see pci_acs_flags_enabled() */ 4244 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4245 acs_flags &= (cap | PCI_ACS_EC); 4246 4247 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4248 4249 return acs_flags & ~ctrl ? 0 : 1; 4250 } 4251 4252 static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) 4253 { 4254 /* 4255 * SV, TB, and UF are not relevant to multifunction endpoints. 4256 * 4257 * Multifunction devices are only required to implement RR, CR, and DT 4258 * in their ACS capability if they support peer-to-peer transactions. 4259 * Devices matching this quirk have been verified by the vendor to not 4260 * perform peer-to-peer with other functions, allowing us to mask out 4261 * these bits as if they were unimplemented in the ACS capability. 4262 */ 4263 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 4264 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 4265 4266 return acs_flags ? 0 : 1; 4267 } 4268 4269 static const struct pci_dev_acs_enabled { 4270 u16 vendor; 4271 u16 device; 4272 int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); 4273 } pci_dev_acs_enabled[] = { 4274 { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, 4275 { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, 4276 { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, 4277 { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, 4278 { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, 4279 { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, 4280 { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, 4281 { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, 4282 { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, 4283 { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, 4284 { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs }, 4285 { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, 4286 { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, 4287 { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, 4288 { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, 4289 { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, 4290 { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, 4291 { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, 4292 { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, 4293 { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, 4294 { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, 4295 { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, 4296 { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, 4297 { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, 4298 { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, 4299 { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, 4300 { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, 4301 { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, 4302 { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, 4303 { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, 4304 { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, 4305 /* 82580 */ 4306 { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, 4307 { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, 4308 { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, 4309 { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, 4310 { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, 4311 { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, 4312 { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, 4313 /* 82576 */ 4314 { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, 4315 { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, 4316 { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, 4317 { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, 4318 { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, 4319 { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, 4320 { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, 4321 { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, 4322 /* 82575 */ 4323 { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, 4324 { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, 4325 { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, 4326 /* I350 */ 4327 { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, 4328 { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, 4329 { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, 4330 { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, 4331 /* 82571 (Quads omitted due to non-ACS switch) */ 4332 { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, 4333 { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, 4334 { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, 4335 { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, 4336 /* I219 */ 4337 { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, 4338 { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, 4339 /* QCOM QDF2xxx root ports */ 4340 { 0x17cb, 0x400, pci_quirk_qcom_rp_acs }, 4341 { 0x17cb, 0x401, pci_quirk_qcom_rp_acs }, 4342 /* Intel PCH root ports */ 4343 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, 4344 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs }, 4345 { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ 4346 { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ 4347 /* Cavium ThunderX */ 4348 { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, 4349 { 0 } 4350 }; 4351 4352 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) 4353 { 4354 const struct pci_dev_acs_enabled *i; 4355 int ret; 4356 4357 /* 4358 * Allow devices that do not expose standard PCIe ACS capabilities 4359 * or control to indicate their support here. Multi-function express 4360 * devices which do not allow internal peer-to-peer between functions, 4361 * but do not implement PCIe ACS may wish to return true here. 4362 */ 4363 for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { 4364 if ((i->vendor == dev->vendor || 4365 i->vendor == (u16)PCI_ANY_ID) && 4366 (i->device == dev->device || 4367 i->device == (u16)PCI_ANY_ID)) { 4368 ret = i->acs_enabled(dev, acs_flags); 4369 if (ret >= 0) 4370 return ret; 4371 } 4372 } 4373 4374 return -ENOTTY; 4375 } 4376 4377 /* Config space offset of Root Complex Base Address register */ 4378 #define INTEL_LPC_RCBA_REG 0xf0 4379 /* 31:14 RCBA address */ 4380 #define INTEL_LPC_RCBA_MASK 0xffffc000 4381 /* RCBA Enable */ 4382 #define INTEL_LPC_RCBA_ENABLE (1 << 0) 4383 4384 /* Backbone Scratch Pad Register */ 4385 #define INTEL_BSPR_REG 0x1104 4386 /* Backbone Peer Non-Posted Disable */ 4387 #define INTEL_BSPR_REG_BPNPD (1 << 8) 4388 /* Backbone Peer Posted Disable */ 4389 #define INTEL_BSPR_REG_BPPD (1 << 9) 4390 4391 /* Upstream Peer Decode Configuration Register */ 4392 #define INTEL_UPDCR_REG 0x1114 4393 /* 5:0 Peer Decode Enable bits */ 4394 #define INTEL_UPDCR_REG_MASK 0x3f 4395 4396 static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) 4397 { 4398 u32 rcba, bspr, updcr; 4399 void __iomem *rcba_mem; 4400 4401 /* 4402 * Read the RCBA register from the LPC (D31:F0). PCH root ports 4403 * are D28:F* and therefore get probed before LPC, thus we can't 4404 * use pci_get_slot/pci_read_config_dword here. 4405 */ 4406 pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), 4407 INTEL_LPC_RCBA_REG, &rcba); 4408 if (!(rcba & INTEL_LPC_RCBA_ENABLE)) 4409 return -EINVAL; 4410 4411 rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, 4412 PAGE_ALIGN(INTEL_UPDCR_REG)); 4413 if (!rcba_mem) 4414 return -ENOMEM; 4415 4416 /* 4417 * The BSPR can disallow peer cycles, but it's set by soft strap and 4418 * therefore read-only. If both posted and non-posted peer cycles are 4419 * disallowed, we're ok. If either are allowed, then we need to use 4420 * the UPDCR to disable peer decodes for each port. This provides the 4421 * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF 4422 */ 4423 bspr = readl(rcba_mem + INTEL_BSPR_REG); 4424 bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; 4425 if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { 4426 updcr = readl(rcba_mem + INTEL_UPDCR_REG); 4427 if (updcr & INTEL_UPDCR_REG_MASK) { 4428 dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); 4429 updcr &= ~INTEL_UPDCR_REG_MASK; 4430 writel(updcr, rcba_mem + INTEL_UPDCR_REG); 4431 } 4432 } 4433 4434 iounmap(rcba_mem); 4435 return 0; 4436 } 4437 4438 /* Miscellaneous Port Configuration register */ 4439 #define INTEL_MPC_REG 0xd8 4440 /* MPC: Invalid Receive Bus Number Check Enable */ 4441 #define INTEL_MPC_REG_IRBNCE (1 << 26) 4442 4443 static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) 4444 { 4445 u32 mpc; 4446 4447 /* 4448 * When enabled, the IRBNCE bit of the MPC register enables the 4449 * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which 4450 * ensures that requester IDs fall within the bus number range 4451 * of the bridge. Enable if not already. 4452 */ 4453 pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); 4454 if (!(mpc & INTEL_MPC_REG_IRBNCE)) { 4455 dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); 4456 mpc |= INTEL_MPC_REG_IRBNCE; 4457 pci_write_config_word(dev, INTEL_MPC_REG, mpc); 4458 } 4459 } 4460 4461 static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) 4462 { 4463 if (!pci_quirk_intel_pch_acs_match(dev)) 4464 return -ENOTTY; 4465 4466 if (pci_quirk_enable_intel_lpc_acs(dev)) { 4467 dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); 4468 return 0; 4469 } 4470 4471 pci_quirk_enable_intel_rp_mpc_acs(dev); 4472 4473 dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; 4474 4475 dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); 4476 4477 return 0; 4478 } 4479 4480 static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev) 4481 { 4482 int pos; 4483 u32 cap, ctrl; 4484 4485 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4486 return -ENOTTY; 4487 4488 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4489 if (!pos) 4490 return -ENOTTY; 4491 4492 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4493 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4494 4495 ctrl |= (cap & PCI_ACS_SV); 4496 ctrl |= (cap & PCI_ACS_RR); 4497 ctrl |= (cap & PCI_ACS_CR); 4498 ctrl |= (cap & PCI_ACS_UF); 4499 4500 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl); 4501 4502 dev_info(&dev->dev, "Intel SPT PCH root port ACS workaround enabled\n"); 4503 4504 return 0; 4505 } 4506 4507 static const struct pci_dev_enable_acs { 4508 u16 vendor; 4509 u16 device; 4510 int (*enable_acs)(struct pci_dev *dev); 4511 } pci_dev_enable_acs[] = { 4512 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, 4513 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_spt_pch_acs }, 4514 { 0 } 4515 }; 4516 4517 int pci_dev_specific_enable_acs(struct pci_dev *dev) 4518 { 4519 const struct pci_dev_enable_acs *i; 4520 int ret; 4521 4522 for (i = pci_dev_enable_acs; i->enable_acs; i++) { 4523 if ((i->vendor == dev->vendor || 4524 i->vendor == (u16)PCI_ANY_ID) && 4525 (i->device == dev->device || 4526 i->device == (u16)PCI_ANY_ID)) { 4527 ret = i->enable_acs(dev); 4528 if (ret >= 0) 4529 return ret; 4530 } 4531 } 4532 4533 return -ENOTTY; 4534 } 4535 4536 /* 4537 * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with 4538 * QuickAssist Technology (QAT) is prematurely terminated in hardware. The 4539 * Next Capability pointer in the MSI Capability Structure should point to 4540 * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating 4541 * the list. 4542 */ 4543 static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) 4544 { 4545 int pos, i = 0; 4546 u8 next_cap; 4547 u16 reg16, *cap; 4548 struct pci_cap_saved_state *state; 4549 4550 /* Bail if the hardware bug is fixed */ 4551 if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) 4552 return; 4553 4554 /* Bail if MSI Capability Structure is not found for some reason */ 4555 pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); 4556 if (!pos) 4557 return; 4558 4559 /* 4560 * Bail if Next Capability pointer in the MSI Capability Structure 4561 * is not the expected incorrect 0x00. 4562 */ 4563 pci_read_config_byte(pdev, pos + 1, &next_cap); 4564 if (next_cap) 4565 return; 4566 4567 /* 4568 * PCIe Capability Structure is expected to be at 0x50 and should 4569 * terminate the list (Next Capability pointer is 0x00). Verify 4570 * Capability Id and Next Capability pointer is as expected. 4571 * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() 4572 * to correctly set kernel data structures which have already been 4573 * set incorrectly due to the hardware bug. 4574 */ 4575 pos = 0x50; 4576 pci_read_config_word(pdev, pos, ®16); 4577 if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { 4578 u32 status; 4579 #ifndef PCI_EXP_SAVE_REGS 4580 #define PCI_EXP_SAVE_REGS 7 4581 #endif 4582 int size = PCI_EXP_SAVE_REGS * sizeof(u16); 4583 4584 pdev->pcie_cap = pos; 4585 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 4586 pdev->pcie_flags_reg = reg16; 4587 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); 4588 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; 4589 4590 pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; 4591 if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != 4592 PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) 4593 pdev->cfg_size = PCI_CFG_SPACE_SIZE; 4594 4595 if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) 4596 return; 4597 4598 /* 4599 * Save PCIE cap 4600 */ 4601 state = kzalloc(sizeof(*state) + size, GFP_KERNEL); 4602 if (!state) 4603 return; 4604 4605 state->cap.cap_nr = PCI_CAP_ID_EXP; 4606 state->cap.cap_extended = 0; 4607 state->cap.size = size; 4608 cap = (u16 *)&state->cap.data[0]; 4609 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); 4610 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); 4611 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); 4612 pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); 4613 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); 4614 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); 4615 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); 4616 hlist_add_head(&state->next, &pdev->saved_cap_space); 4617 } 4618 } 4619 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); 4620 4621 /* 4622 * VMD-enabled root ports will change the source ID for all messages 4623 * to the VMD device. Rather than doing device matching with the source 4624 * ID, the AER driver should traverse the child device tree, reading 4625 * AER registers to find the faulting device. 4626 */ 4627 static void quirk_no_aersid(struct pci_dev *pdev) 4628 { 4629 /* VMD Domain */ 4630 if (pdev->bus->sysdata && pci_domain_nr(pdev->bus) >= 0x10000) 4631 pdev->bus->bus_flags |= PCI_BUS_FLAGS_NO_AERSID; 4632 } 4633 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2030, quirk_no_aersid); 4634 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2031, quirk_no_aersid); 4635 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2032, quirk_no_aersid); 4636 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x2033, quirk_no_aersid); 4637