1 /* 2 * This file contains work-arounds for many known PCI hardware 3 * bugs. Devices present only on certain architectures (host 4 * bridges et cetera) should be handled in arch-specific code. 5 * 6 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. 7 * 8 * Copyright (c) 1999 Martin Mares <mj@ucw.cz> 9 * 10 * Init/reset quirks for USB host controllers should be in the 11 * USB quirks file, where their drivers can access reuse it. 12 */ 13 14 #include <linux/types.h> 15 #include <linux/kernel.h> 16 #include <linux/export.h> 17 #include <linux/pci.h> 18 #include <linux/init.h> 19 #include <linux/delay.h> 20 #include <linux/acpi.h> 21 #include <linux/kallsyms.h> 22 #include <linux/dmi.h> 23 #include <linux/pci-aspm.h> 24 #include <linux/ioport.h> 25 #include <linux/sched.h> 26 #include <linux/ktime.h> 27 #include <linux/mm.h> 28 #include <asm/dma.h> /* isa_dma_bridge_buggy */ 29 #include "pci.h" 30 31 /* 32 * Decoding should be disabled for a PCI device during BAR sizing to avoid 33 * conflict. But doing so may cause problems on host bridge and perhaps other 34 * key system devices. For devices that need to have mmio decoding always-on, 35 * we need to set the dev->mmio_always_on bit. 36 */ 37 static void quirk_mmio_always_on(struct pci_dev *dev) 38 { 39 dev->mmio_always_on = 1; 40 } 41 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, 42 PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); 43 44 /* The Mellanox Tavor device gives false positive parity errors 45 * Mark this device with a broken_parity_status, to allow 46 * PCI scanning code to "skip" this now blacklisted device. 47 */ 48 static void quirk_mellanox_tavor(struct pci_dev *dev) 49 { 50 dev->broken_parity_status = 1; /* This device gives false positives */ 51 } 52 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); 53 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); 54 55 /* Deal with broken BIOSes that neglect to enable passive release, 56 which can cause problems in combination with the 82441FX/PPro MTRRs */ 57 static void quirk_passive_release(struct pci_dev *dev) 58 { 59 struct pci_dev *d = NULL; 60 unsigned char dlc; 61 62 /* We have to make sure a particular bit is set in the PIIX3 63 ISA bridge, so we have to go out and find it. */ 64 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { 65 pci_read_config_byte(d, 0x82, &dlc); 66 if (!(dlc & 1<<1)) { 67 dev_info(&d->dev, "PIIX3: Enabling Passive Release\n"); 68 dlc |= 1<<1; 69 pci_write_config_byte(d, 0x82, dlc); 70 } 71 } 72 } 73 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 74 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 75 76 /* The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a workaround 77 but VIA don't answer queries. If you happen to have good contacts at VIA 78 ask them for me please -- Alan 79 80 This appears to be BIOS not version dependent. So presumably there is a 81 chipset level fix */ 82 83 static void quirk_isa_dma_hangs(struct pci_dev *dev) 84 { 85 if (!isa_dma_bridge_buggy) { 86 isa_dma_bridge_buggy = 1; 87 dev_info(&dev->dev, "Activating ISA DMA hang workarounds\n"); 88 } 89 } 90 /* 91 * Its not totally clear which chipsets are the problematic ones 92 * We know 82C586 and 82C596 variants are affected. 93 */ 94 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); 95 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); 96 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); 97 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); 98 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); 99 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); 100 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); 101 102 /* 103 * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear 104 * for some HT machines to use C4 w/o hanging. 105 */ 106 static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) 107 { 108 u32 pmbase; 109 u16 pm1a; 110 111 pci_read_config_dword(dev, 0x40, &pmbase); 112 pmbase = pmbase & 0xff80; 113 pm1a = inw(pmbase); 114 115 if (pm1a & 0x10) { 116 dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); 117 outw(0x10, pmbase); 118 } 119 } 120 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); 121 122 /* 123 * Chipsets where PCI->PCI transfers vanish or hang 124 */ 125 static void quirk_nopcipci(struct pci_dev *dev) 126 { 127 if ((pci_pci_problems & PCIPCI_FAIL) == 0) { 128 dev_info(&dev->dev, "Disabling direct PCI/PCI transfers\n"); 129 pci_pci_problems |= PCIPCI_FAIL; 130 } 131 } 132 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); 133 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); 134 135 static void quirk_nopciamd(struct pci_dev *dev) 136 { 137 u8 rev; 138 pci_read_config_byte(dev, 0x08, &rev); 139 if (rev == 0x13) { 140 /* Erratum 24 */ 141 dev_info(&dev->dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); 142 pci_pci_problems |= PCIAGP_FAIL; 143 } 144 } 145 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); 146 147 /* 148 * Triton requires workarounds to be used by the drivers 149 */ 150 static void quirk_triton(struct pci_dev *dev) 151 { 152 if ((pci_pci_problems&PCIPCI_TRITON) == 0) { 153 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 154 pci_pci_problems |= PCIPCI_TRITON; 155 } 156 } 157 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); 158 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); 159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); 160 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); 161 162 /* 163 * VIA Apollo KT133 needs PCI latency patch 164 * Made according to a windows driver based patch by George E. Breese 165 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm 166 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for 167 * the info on which Mr Breese based his work. 168 * 169 * Updated based on further information from the site and also on 170 * information provided by VIA 171 */ 172 static void quirk_vialatency(struct pci_dev *dev) 173 { 174 struct pci_dev *p; 175 u8 busarb; 176 /* Ok we have a potential problem chipset here. Now see if we have 177 a buggy southbridge */ 178 179 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); 180 if (p != NULL) { 181 /* 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; thanks Dan Hollis */ 182 /* Check for buggy part revisions */ 183 if (p->revision < 0x40 || p->revision > 0x42) 184 goto exit; 185 } else { 186 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); 187 if (p == NULL) /* No problem parts */ 188 goto exit; 189 /* Check for buggy part revisions */ 190 if (p->revision < 0x10 || p->revision > 0x12) 191 goto exit; 192 } 193 194 /* 195 * Ok we have the problem. Now set the PCI master grant to 196 * occur every master grant. The apparent bug is that under high 197 * PCI load (quite common in Linux of course) you can get data 198 * loss when the CPU is held off the bus for 3 bus master requests 199 * This happens to include the IDE controllers.... 200 * 201 * VIA only apply this fix when an SB Live! is present but under 202 * both Linux and Windows this isn't enough, and we have seen 203 * corruption without SB Live! but with things like 3 UDMA IDE 204 * controllers. So we ignore that bit of the VIA recommendation.. 205 */ 206 207 pci_read_config_byte(dev, 0x76, &busarb); 208 /* Set bit 4 and bi 5 of byte 76 to 0x01 209 "Master priority rotation on every PCI master grant */ 210 busarb &= ~(1<<5); 211 busarb |= (1<<4); 212 pci_write_config_byte(dev, 0x76, busarb); 213 dev_info(&dev->dev, "Applying VIA southbridge workaround\n"); 214 exit: 215 pci_dev_put(p); 216 } 217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 218 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 219 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 220 /* Must restore this on a resume from RAM */ 221 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 222 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 223 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 224 225 /* 226 * VIA Apollo VP3 needs ETBF on BT848/878 227 */ 228 static void quirk_viaetbf(struct pci_dev *dev) 229 { 230 if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { 231 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 232 pci_pci_problems |= PCIPCI_VIAETBF; 233 } 234 } 235 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); 236 237 static void quirk_vsfx(struct pci_dev *dev) 238 { 239 if ((pci_pci_problems&PCIPCI_VSFX) == 0) { 240 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 241 pci_pci_problems |= PCIPCI_VSFX; 242 } 243 } 244 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); 245 246 /* 247 * Ali Magik requires workarounds to be used by the drivers 248 * that DMA to AGP space. Latency must be set to 0xA and triton 249 * workaround applied too 250 * [Info kindly provided by ALi] 251 */ 252 static void quirk_alimagik(struct pci_dev *dev) 253 { 254 if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { 255 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 256 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; 257 } 258 } 259 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); 260 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); 261 262 /* 263 * Natoma has some interesting boundary conditions with Zoran stuff 264 * at least 265 */ 266 static void quirk_natoma(struct pci_dev *dev) 267 { 268 if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { 269 dev_info(&dev->dev, "Limiting direct PCI/PCI transfers\n"); 270 pci_pci_problems |= PCIPCI_NATOMA; 271 } 272 } 273 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); 274 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); 275 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); 276 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); 277 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); 278 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); 279 280 /* 281 * This chip can cause PCI parity errors if config register 0xA0 is read 282 * while DMAs are occurring. 283 */ 284 static void quirk_citrine(struct pci_dev *dev) 285 { 286 dev->cfg_size = 0xA0; 287 } 288 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); 289 290 /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ 291 static void quirk_extend_bar_to_page(struct pci_dev *dev) 292 { 293 int i; 294 295 for (i = 0; i < PCI_STD_RESOURCE_END; i++) { 296 struct resource *r = &dev->resource[i]; 297 298 if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { 299 r->end = PAGE_SIZE - 1; 300 r->start = 0; 301 r->flags |= IORESOURCE_UNSET; 302 dev_info(&dev->dev, "expanded BAR %d to page size: %pR\n", 303 i, r); 304 } 305 } 306 } 307 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); 308 309 /* 310 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. 311 * If it's needed, re-allocate the region. 312 */ 313 static void quirk_s3_64M(struct pci_dev *dev) 314 { 315 struct resource *r = &dev->resource[0]; 316 317 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { 318 r->flags |= IORESOURCE_UNSET; 319 r->start = 0; 320 r->end = 0x3ffffff; 321 } 322 } 323 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); 324 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); 325 326 static void quirk_io(struct pci_dev *dev, int pos, unsigned size, 327 const char *name) 328 { 329 u32 region; 330 struct pci_bus_region bus_region; 331 struct resource *res = dev->resource + pos; 332 333 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); 334 335 if (!region) 336 return; 337 338 res->name = pci_name(dev); 339 res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; 340 res->flags |= 341 (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); 342 region &= ~(size - 1); 343 344 /* Convert from PCI bus to resource space */ 345 bus_region.start = region; 346 bus_region.end = region + size - 1; 347 pcibios_bus_to_resource(dev->bus, res, &bus_region); 348 349 dev_info(&dev->dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", 350 name, PCI_BASE_ADDRESS_0 + (pos << 2), res); 351 } 352 353 /* 354 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS 355 * ver. 1.33 20070103) don't set the correct ISA PCI region header info. 356 * BAR0 should be 8 bytes; instead, it may be set to something like 8k 357 * (which conflicts w/ BAR1's memory range). 358 * 359 * CS553x's ISA PCI BARs may also be read-only (ref: 360 * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). 361 */ 362 static void quirk_cs5536_vsa(struct pci_dev *dev) 363 { 364 static char *name = "CS5536 ISA bridge"; 365 366 if (pci_resource_len(dev, 0) != 8) { 367 quirk_io(dev, 0, 8, name); /* SMB */ 368 quirk_io(dev, 1, 256, name); /* GPIO */ 369 quirk_io(dev, 2, 64, name); /* MFGPT */ 370 dev_info(&dev->dev, "%s bug detected (incorrect header); workaround applied\n", 371 name); 372 } 373 } 374 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); 375 376 static void quirk_io_region(struct pci_dev *dev, int port, 377 unsigned size, int nr, const char *name) 378 { 379 u16 region; 380 struct pci_bus_region bus_region; 381 struct resource *res = dev->resource + nr; 382 383 pci_read_config_word(dev, port, ®ion); 384 region &= ~(size - 1); 385 386 if (!region) 387 return; 388 389 res->name = pci_name(dev); 390 res->flags = IORESOURCE_IO; 391 392 /* Convert from PCI bus to resource space */ 393 bus_region.start = region; 394 bus_region.end = region + size - 1; 395 pcibios_bus_to_resource(dev->bus, res, &bus_region); 396 397 if (!pci_claim_resource(dev, nr)) 398 dev_info(&dev->dev, "quirk: %pR claimed by %s\n", res, name); 399 } 400 401 /* 402 * ATI Northbridge setups MCE the processor if you even 403 * read somewhere between 0x3b0->0x3bb or read 0x3d3 404 */ 405 static void quirk_ati_exploding_mce(struct pci_dev *dev) 406 { 407 dev_info(&dev->dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); 408 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ 409 request_region(0x3b0, 0x0C, "RadeonIGP"); 410 request_region(0x3d3, 0x01, "RadeonIGP"); 411 } 412 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); 413 414 /* 415 * In the AMD NL platform, this device ([1022:7912]) has a class code of 416 * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will 417 * claim it. 418 * But the dwc3 driver is a more specific driver for this device, and we'd 419 * prefer to use it instead of xhci. To prevent xhci from claiming the 420 * device, change the class code to 0x0c03fe, which the PCI r3.0 spec 421 * defines as "USB device (not host controller)". The dwc3 driver can then 422 * claim it based on its Vendor and Device ID. 423 */ 424 static void quirk_amd_nl_class(struct pci_dev *pdev) 425 { 426 u32 class = pdev->class; 427 428 /* Use "USB Device (not host controller)" class */ 429 pdev->class = (PCI_CLASS_SERIAL_USB << 8) | 0xfe; 430 dev_info(&pdev->dev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", 431 class, pdev->class); 432 } 433 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, 434 quirk_amd_nl_class); 435 436 /* 437 * Let's make the southbridge information explicit instead 438 * of having to worry about people probing the ACPI areas, 439 * for example.. (Yes, it happens, and if you read the wrong 440 * ACPI register it will put the machine to sleep with no 441 * way of waking it up again. Bummer). 442 * 443 * ALI M7101: Two IO regions pointed to by words at 444 * 0xE0 (64 bytes of ACPI registers) 445 * 0xE2 (32 bytes of SMB registers) 446 */ 447 static void quirk_ali7101_acpi(struct pci_dev *dev) 448 { 449 quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); 450 quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); 451 } 452 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); 453 454 static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 455 { 456 u32 devres; 457 u32 mask, size, base; 458 459 pci_read_config_dword(dev, port, &devres); 460 if ((devres & enable) != enable) 461 return; 462 mask = (devres >> 16) & 15; 463 base = devres & 0xffff; 464 size = 16; 465 for (;;) { 466 unsigned bit = size >> 1; 467 if ((bit & mask) == bit) 468 break; 469 size = bit; 470 } 471 /* 472 * For now we only print it out. Eventually we'll want to 473 * reserve it (at least if it's in the 0x1000+ range), but 474 * let's get enough confirmation reports first. 475 */ 476 base &= -size; 477 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, 478 base + size - 1); 479 } 480 481 static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 482 { 483 u32 devres; 484 u32 mask, size, base; 485 486 pci_read_config_dword(dev, port, &devres); 487 if ((devres & enable) != enable) 488 return; 489 base = devres & 0xffff0000; 490 mask = (devres & 0x3f) << 16; 491 size = 128 << 16; 492 for (;;) { 493 unsigned bit = size >> 1; 494 if ((bit & mask) == bit) 495 break; 496 size = bit; 497 } 498 /* 499 * For now we only print it out. Eventually we'll want to 500 * reserve it, but let's get enough confirmation reports first. 501 */ 502 base &= -size; 503 dev_info(&dev->dev, "%s MMIO at %04x-%04x\n", name, base, 504 base + size - 1); 505 } 506 507 /* 508 * PIIX4 ACPI: Two IO regions pointed to by longwords at 509 * 0x40 (64 bytes of ACPI registers) 510 * 0x90 (16 bytes of SMB registers) 511 * and a few strange programmable PIIX4 device resources. 512 */ 513 static void quirk_piix4_acpi(struct pci_dev *dev) 514 { 515 u32 res_a; 516 517 quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); 518 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); 519 520 /* Device resource A has enables for some of the other ones */ 521 pci_read_config_dword(dev, 0x5c, &res_a); 522 523 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); 524 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); 525 526 /* Device resource D is just bitfields for static resources */ 527 528 /* Device 12 enabled? */ 529 if (res_a & (1 << 29)) { 530 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); 531 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); 532 } 533 /* Device 13 enabled? */ 534 if (res_a & (1 << 30)) { 535 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); 536 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); 537 } 538 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); 539 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); 540 } 541 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); 542 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); 543 544 #define ICH_PMBASE 0x40 545 #define ICH_ACPI_CNTL 0x44 546 #define ICH4_ACPI_EN 0x10 547 #define ICH6_ACPI_EN 0x80 548 #define ICH4_GPIOBASE 0x58 549 #define ICH4_GPIO_CNTL 0x5c 550 #define ICH4_GPIO_EN 0x10 551 #define ICH6_GPIOBASE 0x48 552 #define ICH6_GPIO_CNTL 0x4c 553 #define ICH6_GPIO_EN 0x10 554 555 /* 556 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at 557 * 0x40 (128 bytes of ACPI, GPIO & TCO registers) 558 * 0x58 (64 bytes of GPIO I/O space) 559 */ 560 static void quirk_ich4_lpc_acpi(struct pci_dev *dev) 561 { 562 u8 enable; 563 564 /* 565 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict 566 * with low legacy (and fixed) ports. We don't know the decoding 567 * priority and can't tell whether the legacy device or the one created 568 * here is really at that address. This happens on boards with broken 569 * BIOSes. 570 */ 571 572 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 573 if (enable & ICH4_ACPI_EN) 574 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 575 "ICH4 ACPI/GPIO/TCO"); 576 577 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); 578 if (enable & ICH4_GPIO_EN) 579 quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 580 "ICH4 GPIO"); 581 } 582 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); 583 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); 584 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); 585 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); 586 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); 587 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); 588 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); 589 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); 590 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); 591 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); 592 593 static void ich6_lpc_acpi_gpio(struct pci_dev *dev) 594 { 595 u8 enable; 596 597 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 598 if (enable & ICH6_ACPI_EN) 599 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 600 "ICH6 ACPI/GPIO/TCO"); 601 602 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); 603 if (enable & ICH6_GPIO_EN) 604 quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 605 "ICH6 GPIO"); 606 } 607 608 static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name, int dynsize) 609 { 610 u32 val; 611 u32 size, base; 612 613 pci_read_config_dword(dev, reg, &val); 614 615 /* Enabled? */ 616 if (!(val & 1)) 617 return; 618 base = val & 0xfffc; 619 if (dynsize) { 620 /* 621 * This is not correct. It is 16, 32 or 64 bytes depending on 622 * register D31:F0:ADh bits 5:4. 623 * 624 * But this gets us at least _part_ of it. 625 */ 626 size = 16; 627 } else { 628 size = 128; 629 } 630 base &= ~(size-1); 631 632 /* Just print it out for now. We should reserve it after more debugging */ 633 dev_info(&dev->dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); 634 } 635 636 static void quirk_ich6_lpc(struct pci_dev *dev) 637 { 638 /* Shared ACPI/GPIO decode with all ICH6+ */ 639 ich6_lpc_acpi_gpio(dev); 640 641 /* ICH6-specific generic IO decode */ 642 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); 643 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); 644 } 645 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); 646 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); 647 648 static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, const char *name) 649 { 650 u32 val; 651 u32 mask, base; 652 653 pci_read_config_dword(dev, reg, &val); 654 655 /* Enabled? */ 656 if (!(val & 1)) 657 return; 658 659 /* 660 * IO base in bits 15:2, mask in bits 23:18, both 661 * are dword-based 662 */ 663 base = val & 0xfffc; 664 mask = (val >> 16) & 0xfc; 665 mask |= 3; 666 667 /* Just print it out for now. We should reserve it after more debugging */ 668 dev_info(&dev->dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); 669 } 670 671 /* ICH7-10 has the same common LPC generic IO decode registers */ 672 static void quirk_ich7_lpc(struct pci_dev *dev) 673 { 674 /* We share the common ACPI/GPIO decode with ICH6 */ 675 ich6_lpc_acpi_gpio(dev); 676 677 /* And have 4 ICH7+ generic decodes */ 678 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); 679 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); 680 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); 681 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); 682 } 683 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); 684 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); 685 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); 686 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); 687 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); 688 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); 689 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); 690 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); 691 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); 692 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); 693 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); 694 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); 695 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); 696 697 /* 698 * VIA ACPI: One IO region pointed to by longword at 699 * 0x48 or 0x20 (256 bytes of ACPI registers) 700 */ 701 static void quirk_vt82c586_acpi(struct pci_dev *dev) 702 { 703 if (dev->revision & 0x10) 704 quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, 705 "vt82c586 ACPI"); 706 } 707 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); 708 709 /* 710 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at 711 * 0x48 (256 bytes of ACPI registers) 712 * 0x70 (128 bytes of hardware monitoring register) 713 * 0x90 (16 bytes of SMB registers) 714 */ 715 static void quirk_vt82c686_acpi(struct pci_dev *dev) 716 { 717 quirk_vt82c586_acpi(dev); 718 719 quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, 720 "vt82c686 HW-mon"); 721 722 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); 723 } 724 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); 725 726 /* 727 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at 728 * 0x88 (128 bytes of power management registers) 729 * 0xd0 (16 bytes of SMB registers) 730 */ 731 static void quirk_vt8235_acpi(struct pci_dev *dev) 732 { 733 quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); 734 quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); 735 } 736 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); 737 738 /* 739 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back: 740 * Disable fast back-to-back on the secondary bus segment 741 */ 742 static void quirk_xio2000a(struct pci_dev *dev) 743 { 744 struct pci_dev *pdev; 745 u16 command; 746 747 dev_warn(&dev->dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); 748 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { 749 pci_read_config_word(pdev, PCI_COMMAND, &command); 750 if (command & PCI_COMMAND_FAST_BACK) 751 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); 752 } 753 } 754 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, 755 quirk_xio2000a); 756 757 #ifdef CONFIG_X86_IO_APIC 758 759 #include <asm/io_apic.h> 760 761 /* 762 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip 763 * devices to the external APIC. 764 * 765 * TODO: When we have device-specific interrupt routers, 766 * this code will go away from quirks. 767 */ 768 static void quirk_via_ioapic(struct pci_dev *dev) 769 { 770 u8 tmp; 771 772 if (nr_ioapics < 1) 773 tmp = 0; /* nothing routed to external APIC */ 774 else 775 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ 776 777 dev_info(&dev->dev, "%sbling VIA external APIC routing\n", 778 tmp == 0 ? "Disa" : "Ena"); 779 780 /* Offset 0x58: External APIC IRQ output control */ 781 pci_write_config_byte(dev, 0x58, tmp); 782 } 783 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 784 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 785 786 /* 787 * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. 788 * This leads to doubled level interrupt rates. 789 * Set this bit to get rid of cycle wastage. 790 * Otherwise uncritical. 791 */ 792 static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) 793 { 794 u8 misc_control2; 795 #define BYPASS_APIC_DEASSERT 8 796 797 pci_read_config_byte(dev, 0x5B, &misc_control2); 798 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { 799 dev_info(&dev->dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); 800 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); 801 } 802 } 803 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 804 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 805 806 /* 807 * The AMD io apic can hang the box when an apic irq is masked. 808 * We check all revs >= B0 (yet not in the pre production!) as the bug 809 * is currently marked NoFix 810 * 811 * We have multiple reports of hangs with this chipset that went away with 812 * noapic specified. For the moment we assume it's the erratum. We may be wrong 813 * of course. However the advice is demonstrably good even if so.. 814 */ 815 static void quirk_amd_ioapic(struct pci_dev *dev) 816 { 817 if (dev->revision >= 0x02) { 818 dev_warn(&dev->dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); 819 dev_warn(&dev->dev, " : booting with the \"noapic\" option\n"); 820 } 821 } 822 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); 823 #endif /* CONFIG_X86_IO_APIC */ 824 825 /* 826 * Some settings of MMRBC can lead to data corruption so block changes. 827 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide 828 */ 829 static void quirk_amd_8131_mmrbc(struct pci_dev *dev) 830 { 831 if (dev->subordinate && dev->revision <= 0x12) { 832 dev_info(&dev->dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", 833 dev->revision); 834 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; 835 } 836 } 837 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); 838 839 /* 840 * FIXME: it is questionable that quirk_via_acpi 841 * is needed. It shows up as an ISA bridge, and does not 842 * support the PCI_INTERRUPT_LINE register at all. Therefore 843 * it seems like setting the pci_dev's 'irq' to the 844 * value of the ACPI SCI interrupt is only done for convenience. 845 * -jgarzik 846 */ 847 static void quirk_via_acpi(struct pci_dev *d) 848 { 849 /* 850 * VIA ACPI device: SCI IRQ line in PCI config byte 0x42 851 */ 852 u8 irq; 853 pci_read_config_byte(d, 0x42, &irq); 854 irq &= 0xf; 855 if (irq && (irq != 2)) 856 d->irq = irq; 857 } 858 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); 859 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); 860 861 862 /* 863 * VIA bridges which have VLink 864 */ 865 866 static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; 867 868 static void quirk_via_bridge(struct pci_dev *dev) 869 { 870 /* See what bridge we have and find the device ranges */ 871 switch (dev->device) { 872 case PCI_DEVICE_ID_VIA_82C686: 873 /* The VT82C686 is special, it attaches to PCI and can have 874 any device number. All its subdevices are functions of 875 that single device. */ 876 via_vlink_dev_lo = PCI_SLOT(dev->devfn); 877 via_vlink_dev_hi = PCI_SLOT(dev->devfn); 878 break; 879 case PCI_DEVICE_ID_VIA_8237: 880 case PCI_DEVICE_ID_VIA_8237A: 881 via_vlink_dev_lo = 15; 882 break; 883 case PCI_DEVICE_ID_VIA_8235: 884 via_vlink_dev_lo = 16; 885 break; 886 case PCI_DEVICE_ID_VIA_8231: 887 case PCI_DEVICE_ID_VIA_8233_0: 888 case PCI_DEVICE_ID_VIA_8233A: 889 case PCI_DEVICE_ID_VIA_8233C_0: 890 via_vlink_dev_lo = 17; 891 break; 892 } 893 } 894 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); 895 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); 896 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); 897 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); 898 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); 899 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); 900 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); 901 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); 902 903 /** 904 * quirk_via_vlink - VIA VLink IRQ number update 905 * @dev: PCI device 906 * 907 * If the device we are dealing with is on a PIC IRQ we need to 908 * ensure that the IRQ line register which usually is not relevant 909 * for PCI cards, is actually written so that interrupts get sent 910 * to the right place. 911 * We only do this on systems where a VIA south bridge was detected, 912 * and only for VIA devices on the motherboard (see quirk_via_bridge 913 * above). 914 */ 915 916 static void quirk_via_vlink(struct pci_dev *dev) 917 { 918 u8 irq, new_irq; 919 920 /* Check if we have VLink at all */ 921 if (via_vlink_dev_lo == -1) 922 return; 923 924 new_irq = dev->irq; 925 926 /* Don't quirk interrupts outside the legacy IRQ range */ 927 if (!new_irq || new_irq > 15) 928 return; 929 930 /* Internal device ? */ 931 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || 932 PCI_SLOT(dev->devfn) < via_vlink_dev_lo) 933 return; 934 935 /* This is an internal VLink device on a PIC interrupt. The BIOS 936 ought to have set this but may not have, so we redo it */ 937 938 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 939 if (new_irq != irq) { 940 dev_info(&dev->dev, "VIA VLink IRQ fixup, from %d to %d\n", 941 irq, new_irq); 942 udelay(15); /* unknown if delay really needed */ 943 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); 944 } 945 } 946 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); 947 948 /* 949 * VIA VT82C598 has its device ID settable and many BIOSes 950 * set it to the ID of VT82C597 for backward compatibility. 951 * We need to switch it off to be able to recognize the real 952 * type of the chip. 953 */ 954 static void quirk_vt82c598_id(struct pci_dev *dev) 955 { 956 pci_write_config_byte(dev, 0xfc, 0); 957 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); 958 } 959 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); 960 961 /* 962 * CardBus controllers have a legacy base address that enables them 963 * to respond as i82365 pcmcia controllers. We don't want them to 964 * do this even if the Linux CardBus driver is not loaded, because 965 * the Linux i82365 driver does not (and should not) handle CardBus. 966 */ 967 static void quirk_cardbus_legacy(struct pci_dev *dev) 968 { 969 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); 970 } 971 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 972 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 973 DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, 974 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 975 976 /* 977 * Following the PCI ordering rules is optional on the AMD762. I'm not 978 * sure what the designers were smoking but let's not inhale... 979 * 980 * To be fair to AMD, it follows the spec by default, its BIOS people 981 * who turn it off! 982 */ 983 static void quirk_amd_ordering(struct pci_dev *dev) 984 { 985 u32 pcic; 986 pci_read_config_dword(dev, 0x4C, &pcic); 987 if ((pcic & 6) != 6) { 988 pcic |= 6; 989 dev_warn(&dev->dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); 990 pci_write_config_dword(dev, 0x4C, pcic); 991 pci_read_config_dword(dev, 0x84, &pcic); 992 pcic |= (1 << 23); /* Required in this mode */ 993 pci_write_config_dword(dev, 0x84, pcic); 994 } 995 } 996 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 997 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 998 999 /* 1000 * DreamWorks provided workaround for Dunord I-3000 problem 1001 * 1002 * This card decodes and responds to addresses not apparently 1003 * assigned to it. We force a larger allocation to ensure that 1004 * nothing gets put too close to it. 1005 */ 1006 static void quirk_dunord(struct pci_dev *dev) 1007 { 1008 struct resource *r = &dev->resource[1]; 1009 1010 r->flags |= IORESOURCE_UNSET; 1011 r->start = 0; 1012 r->end = 0xffffff; 1013 } 1014 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); 1015 1016 /* 1017 * i82380FB mobile docking controller: its PCI-to-PCI bridge 1018 * is subtractive decoding (transparent), and does indicate this 1019 * in the ProgIf. Unfortunately, the ProgIf value is wrong - 0x80 1020 * instead of 0x01. 1021 */ 1022 static void quirk_transparent_bridge(struct pci_dev *dev) 1023 { 1024 dev->transparent = 1; 1025 } 1026 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); 1027 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); 1028 1029 /* 1030 * Common misconfiguration of the MediaGX/Geode PCI master that will 1031 * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 1032 * datasheets found at http://www.national.com/analog for info on what 1033 * these bits do. <christer@weinigel.se> 1034 */ 1035 static void quirk_mediagx_master(struct pci_dev *dev) 1036 { 1037 u8 reg; 1038 1039 pci_read_config_byte(dev, 0x41, ®); 1040 if (reg & 2) { 1041 reg &= ~2; 1042 dev_info(&dev->dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", 1043 reg); 1044 pci_write_config_byte(dev, 0x41, reg); 1045 } 1046 } 1047 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1048 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1049 1050 /* 1051 * Ensure C0 rev restreaming is off. This is normally done by 1052 * the BIOS but in the odd case it is not the results are corruption 1053 * hence the presence of a Linux check 1054 */ 1055 static void quirk_disable_pxb(struct pci_dev *pdev) 1056 { 1057 u16 config; 1058 1059 if (pdev->revision != 0x04) /* Only C0 requires this */ 1060 return; 1061 pci_read_config_word(pdev, 0x40, &config); 1062 if (config & (1<<6)) { 1063 config &= ~(1<<6); 1064 pci_write_config_word(pdev, 0x40, config); 1065 dev_info(&pdev->dev, "C0 revision 450NX. Disabling PCI restreaming\n"); 1066 } 1067 } 1068 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1069 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1070 1071 static void quirk_amd_ide_mode(struct pci_dev *pdev) 1072 { 1073 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ 1074 u8 tmp; 1075 1076 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); 1077 if (tmp == 0x01) { 1078 pci_read_config_byte(pdev, 0x40, &tmp); 1079 pci_write_config_byte(pdev, 0x40, tmp|1); 1080 pci_write_config_byte(pdev, 0x9, 1); 1081 pci_write_config_byte(pdev, 0xa, 6); 1082 pci_write_config_byte(pdev, 0x40, tmp); 1083 1084 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; 1085 dev_info(&pdev->dev, "set SATA to AHCI mode\n"); 1086 } 1087 } 1088 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1089 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1090 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1091 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1092 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1093 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1094 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1095 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1096 1097 /* 1098 * Serverworks CSB5 IDE does not fully support native mode 1099 */ 1100 static void quirk_svwks_csb5ide(struct pci_dev *pdev) 1101 { 1102 u8 prog; 1103 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1104 if (prog & 5) { 1105 prog &= ~5; 1106 pdev->class &= ~5; 1107 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1108 /* PCI layer will sort out resources */ 1109 } 1110 } 1111 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); 1112 1113 /* 1114 * Intel 82801CAM ICH3-M datasheet says IDE modes must be the same 1115 */ 1116 static void quirk_ide_samemode(struct pci_dev *pdev) 1117 { 1118 u8 prog; 1119 1120 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1121 1122 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { 1123 dev_info(&pdev->dev, "IDE mode mismatch; forcing legacy mode\n"); 1124 prog &= ~5; 1125 pdev->class &= ~5; 1126 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1127 } 1128 } 1129 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); 1130 1131 /* 1132 * Some ATA devices break if put into D3 1133 */ 1134 1135 static void quirk_no_ata_d3(struct pci_dev *pdev) 1136 { 1137 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; 1138 } 1139 /* Quirk the legacy ATA devices only. The AHCI ones are ok */ 1140 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, 1141 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1142 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 1143 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1144 /* ALi loses some register settings that we cannot then restore */ 1145 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, 1146 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1147 /* VIA comes back fine but we need to keep it alive or ACPI GTM failures 1148 occur when mode detecting */ 1149 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, 1150 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1151 1152 /* This was originally an Alpha specific thing, but it really fits here. 1153 * The i82375 PCI/EISA bridge appears as non-classified. Fix that. 1154 */ 1155 static void quirk_eisa_bridge(struct pci_dev *dev) 1156 { 1157 dev->class = PCI_CLASS_BRIDGE_EISA << 8; 1158 } 1159 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); 1160 1161 1162 /* 1163 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge 1164 * is not activated. The myth is that Asus said that they do not want the 1165 * users to be irritated by just another PCI Device in the Win98 device 1166 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors 1167 * package 2.7.0 for details) 1168 * 1169 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC 1170 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 1171 * becomes necessary to do this tweak in two steps -- the chosen trigger 1172 * is either the Host bridge (preferred) or on-board VGA controller. 1173 * 1174 * Note that we used to unhide the SMBus that way on Toshiba laptops 1175 * (Satellite A40 and Tecra M2) but then found that the thermal management 1176 * was done by SMM code, which could cause unsynchronized concurrent 1177 * accesses to the SMBus registers, with potentially bad effects. Thus you 1178 * should be very careful when adding new entries: if SMM is accessing the 1179 * Intel SMBus, this is a very good reason to leave it hidden. 1180 * 1181 * Likewise, many recent laptops use ACPI for thermal management. If the 1182 * ACPI DSDT code accesses the SMBus, then Linux should not access it 1183 * natively, and keeping the SMBus hidden is the right thing to do. If you 1184 * are about to add an entry in the table below, please first disassemble 1185 * the DSDT and double-check that there is no code accessing the SMBus. 1186 */ 1187 static int asus_hides_smbus; 1188 1189 static void asus_hides_smbus_hostbridge(struct pci_dev *dev) 1190 { 1191 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1192 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) 1193 switch (dev->subsystem_device) { 1194 case 0x8025: /* P4B-LX */ 1195 case 0x8070: /* P4B */ 1196 case 0x8088: /* P4B533 */ 1197 case 0x1626: /* L3C notebook */ 1198 asus_hides_smbus = 1; 1199 } 1200 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) 1201 switch (dev->subsystem_device) { 1202 case 0x80b1: /* P4GE-V */ 1203 case 0x80b2: /* P4PE */ 1204 case 0x8093: /* P4B533-V */ 1205 asus_hides_smbus = 1; 1206 } 1207 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) 1208 switch (dev->subsystem_device) { 1209 case 0x8030: /* P4T533 */ 1210 asus_hides_smbus = 1; 1211 } 1212 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) 1213 switch (dev->subsystem_device) { 1214 case 0x8070: /* P4G8X Deluxe */ 1215 asus_hides_smbus = 1; 1216 } 1217 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) 1218 switch (dev->subsystem_device) { 1219 case 0x80c9: /* PU-DLS */ 1220 asus_hides_smbus = 1; 1221 } 1222 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) 1223 switch (dev->subsystem_device) { 1224 case 0x1751: /* M2N notebook */ 1225 case 0x1821: /* M5N notebook */ 1226 case 0x1897: /* A6L notebook */ 1227 asus_hides_smbus = 1; 1228 } 1229 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1230 switch (dev->subsystem_device) { 1231 case 0x184b: /* W1N notebook */ 1232 case 0x186a: /* M6Ne notebook */ 1233 asus_hides_smbus = 1; 1234 } 1235 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1236 switch (dev->subsystem_device) { 1237 case 0x80f2: /* P4P800-X */ 1238 asus_hides_smbus = 1; 1239 } 1240 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) 1241 switch (dev->subsystem_device) { 1242 case 0x1882: /* M6V notebook */ 1243 case 0x1977: /* A6VA notebook */ 1244 asus_hides_smbus = 1; 1245 } 1246 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { 1247 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1248 switch (dev->subsystem_device) { 1249 case 0x088C: /* HP Compaq nc8000 */ 1250 case 0x0890: /* HP Compaq nc6000 */ 1251 asus_hides_smbus = 1; 1252 } 1253 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1254 switch (dev->subsystem_device) { 1255 case 0x12bc: /* HP D330L */ 1256 case 0x12bd: /* HP D530 */ 1257 case 0x006a: /* HP Compaq nx9500 */ 1258 asus_hides_smbus = 1; 1259 } 1260 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) 1261 switch (dev->subsystem_device) { 1262 case 0x12bf: /* HP xw4100 */ 1263 asus_hides_smbus = 1; 1264 } 1265 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { 1266 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1267 switch (dev->subsystem_device) { 1268 case 0xC00C: /* Samsung P35 notebook */ 1269 asus_hides_smbus = 1; 1270 } 1271 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { 1272 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1273 switch (dev->subsystem_device) { 1274 case 0x0058: /* Compaq Evo N620c */ 1275 asus_hides_smbus = 1; 1276 } 1277 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) 1278 switch (dev->subsystem_device) { 1279 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ 1280 /* Motherboard doesn't have Host bridge 1281 * subvendor/subdevice IDs, therefore checking 1282 * its on-board VGA controller */ 1283 asus_hides_smbus = 1; 1284 } 1285 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) 1286 switch (dev->subsystem_device) { 1287 case 0x00b8: /* Compaq Evo D510 CMT */ 1288 case 0x00b9: /* Compaq Evo D510 SFF */ 1289 case 0x00ba: /* Compaq Evo D510 USDT */ 1290 /* Motherboard doesn't have Host bridge 1291 * subvendor/subdevice IDs and on-board VGA 1292 * controller is disabled if an AGP card is 1293 * inserted, therefore checking USB UHCI 1294 * Controller #1 */ 1295 asus_hides_smbus = 1; 1296 } 1297 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) 1298 switch (dev->subsystem_device) { 1299 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ 1300 /* Motherboard doesn't have host bridge 1301 * subvendor/subdevice IDs, therefore checking 1302 * its on-board VGA controller */ 1303 asus_hides_smbus = 1; 1304 } 1305 } 1306 } 1307 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); 1308 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); 1309 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); 1310 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); 1311 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); 1312 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); 1313 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); 1314 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); 1315 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); 1316 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); 1317 1318 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); 1319 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); 1320 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); 1321 1322 static void asus_hides_smbus_lpc(struct pci_dev *dev) 1323 { 1324 u16 val; 1325 1326 if (likely(!asus_hides_smbus)) 1327 return; 1328 1329 pci_read_config_word(dev, 0xF2, &val); 1330 if (val & 0x8) { 1331 pci_write_config_word(dev, 0xF2, val & (~0x8)); 1332 pci_read_config_word(dev, 0xF2, &val); 1333 if (val & 0x8) 1334 dev_info(&dev->dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", 1335 val); 1336 else 1337 dev_info(&dev->dev, "Enabled i801 SMBus device\n"); 1338 } 1339 } 1340 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1341 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1342 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1343 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1344 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1345 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1346 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1347 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1348 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1349 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1350 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1351 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1352 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1353 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1354 1355 /* It appears we just have one such device. If not, we have a warning */ 1356 static void __iomem *asus_rcba_base; 1357 static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) 1358 { 1359 u32 rcba; 1360 1361 if (likely(!asus_hides_smbus)) 1362 return; 1363 WARN_ON(asus_rcba_base); 1364 1365 pci_read_config_dword(dev, 0xF0, &rcba); 1366 /* use bits 31:14, 16 kB aligned */ 1367 asus_rcba_base = ioremap_nocache(rcba & 0xFFFFC000, 0x4000); 1368 if (asus_rcba_base == NULL) 1369 return; 1370 } 1371 1372 static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) 1373 { 1374 u32 val; 1375 1376 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1377 return; 1378 /* read the Function Disable register, dword mode only */ 1379 val = readl(asus_rcba_base + 0x3418); 1380 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); /* enable the SMBus device */ 1381 } 1382 1383 static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) 1384 { 1385 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1386 return; 1387 iounmap(asus_rcba_base); 1388 asus_rcba_base = NULL; 1389 dev_info(&dev->dev, "Enabled ICH6/i801 SMBus device\n"); 1390 } 1391 1392 static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) 1393 { 1394 asus_hides_smbus_lpc_ich6_suspend(dev); 1395 asus_hides_smbus_lpc_ich6_resume_early(dev); 1396 asus_hides_smbus_lpc_ich6_resume(dev); 1397 } 1398 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); 1399 DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); 1400 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); 1401 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); 1402 1403 /* 1404 * SiS 96x south bridge: BIOS typically hides SMBus device... 1405 */ 1406 static void quirk_sis_96x_smbus(struct pci_dev *dev) 1407 { 1408 u8 val = 0; 1409 pci_read_config_byte(dev, 0x77, &val); 1410 if (val & 0x10) { 1411 dev_info(&dev->dev, "Enabling SiS 96x SMBus\n"); 1412 pci_write_config_byte(dev, 0x77, val & ~0x10); 1413 } 1414 } 1415 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1416 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1417 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1418 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1419 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1420 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1421 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1422 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1423 1424 /* 1425 * ... This is further complicated by the fact that some SiS96x south 1426 * bridges pretend to be 85C503/5513 instead. In that case see if we 1427 * spotted a compatible north bridge to make sure. 1428 * (pci_find_device doesn't work yet) 1429 * 1430 * We can also enable the sis96x bit in the discovery register.. 1431 */ 1432 #define SIS_DETECT_REGISTER 0x40 1433 1434 static void quirk_sis_503(struct pci_dev *dev) 1435 { 1436 u8 reg; 1437 u16 devid; 1438 1439 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); 1440 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); 1441 pci_read_config_word(dev, PCI_DEVICE_ID, &devid); 1442 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { 1443 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); 1444 return; 1445 } 1446 1447 /* 1448 * Ok, it now shows up as a 96x.. run the 96x quirk by 1449 * hand in case it has already been processed. 1450 * (depends on link order, which is apparently not guaranteed) 1451 */ 1452 dev->device = devid; 1453 quirk_sis_96x_smbus(dev); 1454 } 1455 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1456 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1457 1458 1459 /* 1460 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller 1461 * and MC97 modem controller are disabled when a second PCI soundcard is 1462 * present. This patch, tweaking the VT8237 ISA bridge, enables them. 1463 * -- bjd 1464 */ 1465 static void asus_hides_ac97_lpc(struct pci_dev *dev) 1466 { 1467 u8 val; 1468 int asus_hides_ac97 = 0; 1469 1470 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1471 if (dev->device == PCI_DEVICE_ID_VIA_8237) 1472 asus_hides_ac97 = 1; 1473 } 1474 1475 if (!asus_hides_ac97) 1476 return; 1477 1478 pci_read_config_byte(dev, 0x50, &val); 1479 if (val & 0xc0) { 1480 pci_write_config_byte(dev, 0x50, val & (~0xc0)); 1481 pci_read_config_byte(dev, 0x50, &val); 1482 if (val & 0xc0) 1483 dev_info(&dev->dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", 1484 val); 1485 else 1486 dev_info(&dev->dev, "Enabled onboard AC97/MC97 devices\n"); 1487 } 1488 } 1489 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1490 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1491 1492 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) 1493 1494 /* 1495 * If we are using libata we can drive this chip properly but must 1496 * do this early on to make the additional device appear during 1497 * the PCI scanning. 1498 */ 1499 static void quirk_jmicron_ata(struct pci_dev *pdev) 1500 { 1501 u32 conf1, conf5, class; 1502 u8 hdr; 1503 1504 /* Only poke fn 0 */ 1505 if (PCI_FUNC(pdev->devfn)) 1506 return; 1507 1508 pci_read_config_dword(pdev, 0x40, &conf1); 1509 pci_read_config_dword(pdev, 0x80, &conf5); 1510 1511 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ 1512 conf5 &= ~(1 << 24); /* Clear bit 24 */ 1513 1514 switch (pdev->device) { 1515 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ 1516 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ 1517 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ 1518 /* The controller should be in single function ahci mode */ 1519 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ 1520 break; 1521 1522 case PCI_DEVICE_ID_JMICRON_JMB365: 1523 case PCI_DEVICE_ID_JMICRON_JMB366: 1524 /* Redirect IDE second PATA port to the right spot */ 1525 conf5 |= (1 << 24); 1526 /* Fall through */ 1527 case PCI_DEVICE_ID_JMICRON_JMB361: 1528 case PCI_DEVICE_ID_JMICRON_JMB363: 1529 case PCI_DEVICE_ID_JMICRON_JMB369: 1530 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ 1531 /* Set the class codes correctly and then direct IDE 0 */ 1532 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ 1533 break; 1534 1535 case PCI_DEVICE_ID_JMICRON_JMB368: 1536 /* The controller should be in single function IDE mode */ 1537 conf1 |= 0x00C00000; /* Set 22, 23 */ 1538 break; 1539 } 1540 1541 pci_write_config_dword(pdev, 0x40, conf1); 1542 pci_write_config_dword(pdev, 0x80, conf5); 1543 1544 /* Update pdev accordingly */ 1545 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); 1546 pdev->hdr_type = hdr & 0x7f; 1547 pdev->multifunction = !!(hdr & 0x80); 1548 1549 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); 1550 pdev->class = class >> 8; 1551 } 1552 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1553 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1554 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1555 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1556 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1557 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1558 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1559 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1560 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1561 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1562 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1563 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1564 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1565 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1566 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1567 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1568 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1569 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1570 1571 #endif 1572 1573 static void quirk_jmicron_async_suspend(struct pci_dev *dev) 1574 { 1575 if (dev->multifunction) { 1576 device_disable_async_suspend(&dev->dev); 1577 dev_info(&dev->dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); 1578 } 1579 } 1580 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); 1581 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); 1582 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); 1583 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); 1584 1585 #ifdef CONFIG_X86_IO_APIC 1586 static void quirk_alder_ioapic(struct pci_dev *pdev) 1587 { 1588 int i; 1589 1590 if ((pdev->class >> 8) != 0xff00) 1591 return; 1592 1593 /* the first BAR is the location of the IO APIC...we must 1594 * not touch this (and it's already covered by the fixmap), so 1595 * forcibly insert it into the resource tree */ 1596 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) 1597 insert_resource(&iomem_resource, &pdev->resource[0]); 1598 1599 /* The next five BARs all seem to be rubbish, so just clean 1600 * them out */ 1601 for (i = 1; i < 6; i++) 1602 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); 1603 } 1604 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); 1605 #endif 1606 1607 static void quirk_pcie_mch(struct pci_dev *pdev) 1608 { 1609 pdev->no_msi = 1; 1610 } 1611 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); 1612 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); 1613 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); 1614 1615 1616 /* 1617 * It's possible for the MSI to get corrupted if shpc and acpi 1618 * are used together on certain PXH-based systems. 1619 */ 1620 static void quirk_pcie_pxh(struct pci_dev *dev) 1621 { 1622 dev->no_msi = 1; 1623 dev_warn(&dev->dev, "PXH quirk detected; SHPC device MSI disabled\n"); 1624 } 1625 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); 1626 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); 1627 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); 1628 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); 1629 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); 1630 1631 /* 1632 * Some Intel PCI Express chipsets have trouble with downstream 1633 * device power management. 1634 */ 1635 static void quirk_intel_pcie_pm(struct pci_dev *dev) 1636 { 1637 pci_pm_d3_delay = 120; 1638 dev->no_d1d2 = 1; 1639 } 1640 1641 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); 1642 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); 1643 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); 1644 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); 1645 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); 1646 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); 1647 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); 1648 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); 1649 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); 1650 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); 1651 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); 1652 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); 1653 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); 1654 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); 1655 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); 1656 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); 1657 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); 1658 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); 1659 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); 1660 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); 1661 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); 1662 1663 #ifdef CONFIG_X86_IO_APIC 1664 /* 1665 * Boot interrupts on some chipsets cannot be turned off. For these chipsets, 1666 * remap the original interrupt in the linux kernel to the boot interrupt, so 1667 * that a PCI device's interrupt handler is installed on the boot interrupt 1668 * line instead. 1669 */ 1670 static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) 1671 { 1672 if (noioapicquirk || noioapicreroute) 1673 return; 1674 1675 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; 1676 dev_info(&dev->dev, "rerouting interrupts for [%04x:%04x]\n", 1677 dev->vendor, dev->device); 1678 } 1679 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1680 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1681 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1682 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1683 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1684 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1685 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1686 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1687 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1688 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1689 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1690 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1691 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1692 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1693 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1694 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1695 1696 /* 1697 * On some chipsets we can disable the generation of legacy INTx boot 1698 * interrupts. 1699 */ 1700 1701 /* 1702 * IO-APIC1 on 6300ESB generates boot interrupts, see intel order no 1703 * 300641-004US, section 5.7.3. 1704 */ 1705 #define INTEL_6300_IOAPIC_ABAR 0x40 1706 #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) 1707 1708 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) 1709 { 1710 u16 pci_config_word; 1711 1712 if (noioapicquirk) 1713 return; 1714 1715 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, &pci_config_word); 1716 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; 1717 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, pci_config_word); 1718 1719 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1720 dev->vendor, dev->device); 1721 } 1722 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1723 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, quirk_disable_intel_boot_interrupt); 1724 1725 /* 1726 * disable boot interrupts on HT-1000 1727 */ 1728 #define BC_HT1000_FEATURE_REG 0x64 1729 #define BC_HT1000_PIC_REGS_ENABLE (1<<0) 1730 #define BC_HT1000_MAP_IDX 0xC00 1731 #define BC_HT1000_MAP_DATA 0xC01 1732 1733 static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) 1734 { 1735 u32 pci_config_dword; 1736 u8 irq; 1737 1738 if (noioapicquirk) 1739 return; 1740 1741 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); 1742 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | 1743 BC_HT1000_PIC_REGS_ENABLE); 1744 1745 for (irq = 0x10; irq < 0x10 + 32; irq++) { 1746 outb(irq, BC_HT1000_MAP_IDX); 1747 outb(0x00, BC_HT1000_MAP_DATA); 1748 } 1749 1750 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); 1751 1752 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1753 dev->vendor, dev->device); 1754 } 1755 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1756 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 1757 1758 /* 1759 * disable boot interrupts on AMD and ATI chipsets 1760 */ 1761 /* 1762 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 1763 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode 1764 * (due to an erratum). 1765 */ 1766 #define AMD_813X_MISC 0x40 1767 #define AMD_813X_NOIOAMODE (1<<0) 1768 #define AMD_813X_REV_B1 0x12 1769 #define AMD_813X_REV_B2 0x13 1770 1771 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) 1772 { 1773 u32 pci_config_dword; 1774 1775 if (noioapicquirk) 1776 return; 1777 if ((dev->revision == AMD_813X_REV_B1) || 1778 (dev->revision == AMD_813X_REV_B2)) 1779 return; 1780 1781 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); 1782 pci_config_dword &= ~AMD_813X_NOIOAMODE; 1783 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); 1784 1785 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1786 dev->vendor, dev->device); 1787 } 1788 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1789 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1790 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1791 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 1792 1793 #define AMD_8111_PCI_IRQ_ROUTING 0x56 1794 1795 static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) 1796 { 1797 u16 pci_config_word; 1798 1799 if (noioapicquirk) 1800 return; 1801 1802 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); 1803 if (!pci_config_word) { 1804 dev_info(&dev->dev, "boot interrupts on device [%04x:%04x] already disabled\n", 1805 dev->vendor, dev->device); 1806 return; 1807 } 1808 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); 1809 dev_info(&dev->dev, "disabled boot interrupts on device [%04x:%04x]\n", 1810 dev->vendor, dev->device); 1811 } 1812 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1813 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 1814 #endif /* CONFIG_X86_IO_APIC */ 1815 1816 /* 1817 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size 1818 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. 1819 * Re-allocate the region if needed... 1820 */ 1821 static void quirk_tc86c001_ide(struct pci_dev *dev) 1822 { 1823 struct resource *r = &dev->resource[0]; 1824 1825 if (r->start & 0x8) { 1826 r->flags |= IORESOURCE_UNSET; 1827 r->start = 0; 1828 r->end = 0xf; 1829 } 1830 } 1831 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, 1832 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, 1833 quirk_tc86c001_ide); 1834 1835 /* 1836 * PLX PCI 9050 PCI Target bridge controller has an errata that prevents the 1837 * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) 1838 * being read correctly if bit 7 of the base address is set. 1839 * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). 1840 * Re-allocate the regions to a 256-byte boundary if necessary. 1841 */ 1842 static void quirk_plx_pci9050(struct pci_dev *dev) 1843 { 1844 unsigned int bar; 1845 1846 /* Fixed in revision 2 (PCI 9052). */ 1847 if (dev->revision >= 2) 1848 return; 1849 for (bar = 0; bar <= 1; bar++) 1850 if (pci_resource_len(dev, bar) == 0x80 && 1851 (pci_resource_start(dev, bar) & 0x80)) { 1852 struct resource *r = &dev->resource[bar]; 1853 dev_info(&dev->dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", 1854 bar); 1855 r->flags |= IORESOURCE_UNSET; 1856 r->start = 0; 1857 r->end = 0xff; 1858 } 1859 } 1860 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 1861 quirk_plx_pci9050); 1862 /* 1863 * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) 1864 * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, 1865 * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, 1866 * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. 1867 * 1868 * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" 1869 * driver. 1870 */ 1871 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); 1872 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); 1873 1874 static void quirk_netmos(struct pci_dev *dev) 1875 { 1876 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; 1877 unsigned int num_serial = dev->subsystem_device & 0xf; 1878 1879 /* 1880 * These Netmos parts are multiport serial devices with optional 1881 * parallel ports. Even when parallel ports are present, they 1882 * are identified as class SERIAL, which means the serial driver 1883 * will claim them. To prevent this, mark them as class OTHER. 1884 * These combo devices should be claimed by parport_serial. 1885 * 1886 * The subdevice ID is of the form 0x00PS, where <P> is the number 1887 * of parallel ports and <S> is the number of serial ports. 1888 */ 1889 switch (dev->device) { 1890 case PCI_DEVICE_ID_NETMOS_9835: 1891 /* Well, this rule doesn't hold for the following 9835 device */ 1892 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 1893 dev->subsystem_device == 0x0299) 1894 return; 1895 case PCI_DEVICE_ID_NETMOS_9735: 1896 case PCI_DEVICE_ID_NETMOS_9745: 1897 case PCI_DEVICE_ID_NETMOS_9845: 1898 case PCI_DEVICE_ID_NETMOS_9855: 1899 if (num_parallel) { 1900 dev_info(&dev->dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", 1901 dev->device, num_parallel, num_serial); 1902 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | 1903 (dev->class & 0xff); 1904 } 1905 } 1906 } 1907 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, 1908 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); 1909 1910 /* 1911 * Quirk non-zero PCI functions to route VPD access through function 0 for 1912 * devices that share VPD resources between functions. The functions are 1913 * expected to be identical devices. 1914 */ 1915 static void quirk_f0_vpd_link(struct pci_dev *dev) 1916 { 1917 struct pci_dev *f0; 1918 1919 if (!PCI_FUNC(dev->devfn)) 1920 return; 1921 1922 f0 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0)); 1923 if (!f0) 1924 return; 1925 1926 if (f0->vpd && dev->class == f0->class && 1927 dev->vendor == f0->vendor && dev->device == f0->device) 1928 dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0; 1929 1930 pci_dev_put(f0); 1931 } 1932 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 1933 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_f0_vpd_link); 1934 1935 static void quirk_e100_interrupt(struct pci_dev *dev) 1936 { 1937 u16 command, pmcsr; 1938 u8 __iomem *csr; 1939 u8 cmd_hi; 1940 1941 switch (dev->device) { 1942 /* PCI IDs taken from drivers/net/e100.c */ 1943 case 0x1029: 1944 case 0x1030 ... 0x1034: 1945 case 0x1038 ... 0x103E: 1946 case 0x1050 ... 0x1057: 1947 case 0x1059: 1948 case 0x1064 ... 0x106B: 1949 case 0x1091 ... 0x1095: 1950 case 0x1209: 1951 case 0x1229: 1952 case 0x2449: 1953 case 0x2459: 1954 case 0x245D: 1955 case 0x27DC: 1956 break; 1957 default: 1958 return; 1959 } 1960 1961 /* 1962 * Some firmware hands off the e100 with interrupts enabled, 1963 * which can cause a flood of interrupts if packets are 1964 * received before the driver attaches to the device. So 1965 * disable all e100 interrupts here. The driver will 1966 * re-enable them when it's ready. 1967 */ 1968 pci_read_config_word(dev, PCI_COMMAND, &command); 1969 1970 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) 1971 return; 1972 1973 /* 1974 * Check that the device is in the D0 power state. If it's not, 1975 * there is no point to look any further. 1976 */ 1977 if (dev->pm_cap) { 1978 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); 1979 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) 1980 return; 1981 } 1982 1983 /* Convert from PCI bus to resource space. */ 1984 csr = ioremap(pci_resource_start(dev, 0), 8); 1985 if (!csr) { 1986 dev_warn(&dev->dev, "Can't map e100 registers\n"); 1987 return; 1988 } 1989 1990 cmd_hi = readb(csr + 3); 1991 if (cmd_hi == 0) { 1992 dev_warn(&dev->dev, "Firmware left e100 interrupts enabled; disabling\n"); 1993 writeb(1, csr + 3); 1994 } 1995 1996 iounmap(csr); 1997 } 1998 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 1999 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); 2000 2001 /* 2002 * The 82575 and 82598 may experience data corruption issues when transitioning 2003 * out of L0S. To prevent this we need to disable L0S on the pci-e link 2004 */ 2005 static void quirk_disable_aspm_l0s(struct pci_dev *dev) 2006 { 2007 dev_info(&dev->dev, "Disabling L0s\n"); 2008 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); 2009 } 2010 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); 2011 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); 2012 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); 2013 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); 2014 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); 2015 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); 2016 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); 2017 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); 2018 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); 2019 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); 2020 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); 2021 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); 2022 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); 2023 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); 2024 2025 static void fixup_rev1_53c810(struct pci_dev *dev) 2026 { 2027 u32 class = dev->class; 2028 2029 /* 2030 * rev 1 ncr53c810 chips don't set the class at all which means 2031 * they don't get their resources remapped. Fix that here. 2032 */ 2033 if (class) 2034 return; 2035 2036 dev->class = PCI_CLASS_STORAGE_SCSI << 8; 2037 dev_info(&dev->dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", 2038 class, dev->class); 2039 } 2040 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); 2041 2042 /* Enable 1k I/O space granularity on the Intel P64H2 */ 2043 static void quirk_p64h2_1k_io(struct pci_dev *dev) 2044 { 2045 u16 en1k; 2046 2047 pci_read_config_word(dev, 0x40, &en1k); 2048 2049 if (en1k & 0x200) { 2050 dev_info(&dev->dev, "Enable I/O Space to 1KB granularity\n"); 2051 dev->io_window_1k = 1; 2052 } 2053 } 2054 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); 2055 2056 /* Under some circumstances, AER is not linked with extended capabilities. 2057 * Force it to be linked by setting the corresponding control bit in the 2058 * config space. 2059 */ 2060 static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) 2061 { 2062 uint8_t b; 2063 if (pci_read_config_byte(dev, 0xf41, &b) == 0) { 2064 if (!(b & 0x20)) { 2065 pci_write_config_byte(dev, 0xf41, b | 0x20); 2066 dev_info(&dev->dev, "Linking AER extended capability\n"); 2067 } 2068 } 2069 } 2070 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2071 quirk_nvidia_ck804_pcie_aer_ext_cap); 2072 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2073 quirk_nvidia_ck804_pcie_aer_ext_cap); 2074 2075 static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) 2076 { 2077 /* 2078 * Disable PCI Bus Parking and PCI Master read caching on CX700 2079 * which causes unspecified timing errors with a VT6212L on the PCI 2080 * bus leading to USB2.0 packet loss. 2081 * 2082 * This quirk is only enabled if a second (on the external PCI bus) 2083 * VT6212L is found -- the CX700 core itself also contains a USB 2084 * host controller with the same PCI ID as the VT6212L. 2085 */ 2086 2087 /* Count VT6212L instances */ 2088 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, 2089 PCI_DEVICE_ID_VIA_8235_USB_2, NULL); 2090 uint8_t b; 2091 2092 /* p should contain the first (internal) VT6212L -- see if we have 2093 an external one by searching again */ 2094 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); 2095 if (!p) 2096 return; 2097 pci_dev_put(p); 2098 2099 if (pci_read_config_byte(dev, 0x76, &b) == 0) { 2100 if (b & 0x40) { 2101 /* Turn off PCI Bus Parking */ 2102 pci_write_config_byte(dev, 0x76, b ^ 0x40); 2103 2104 dev_info(&dev->dev, "Disabling VIA CX700 PCI parking\n"); 2105 } 2106 } 2107 2108 if (pci_read_config_byte(dev, 0x72, &b) == 0) { 2109 if (b != 0) { 2110 /* Turn off PCI Master read caching */ 2111 pci_write_config_byte(dev, 0x72, 0x0); 2112 2113 /* Set PCI Master Bus time-out to "1x16 PCLK" */ 2114 pci_write_config_byte(dev, 0x75, 0x1); 2115 2116 /* Disable "Read FIFO Timer" */ 2117 pci_write_config_byte(dev, 0x77, 0x0); 2118 2119 dev_info(&dev->dev, "Disabling VIA CX700 PCI caching\n"); 2120 } 2121 } 2122 } 2123 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); 2124 2125 /* 2126 * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the 2127 * VPD end tag will hang the device. This problem was initially 2128 * observed when a vpd entry was created in sysfs 2129 * ('/sys/bus/pci/devices/<id>/vpd'). A read to this sysfs entry 2130 * will dump 32k of data. Reading a full 32k will cause an access 2131 * beyond the VPD end tag causing the device to hang. Once the device 2132 * is hung, the bnx2 driver will not be able to reset the device. 2133 * We believe that it is legal to read beyond the end tag and 2134 * therefore the solution is to limit the read/write length. 2135 */ 2136 static void quirk_brcm_570x_limit_vpd(struct pci_dev *dev) 2137 { 2138 /* 2139 * Only disable the VPD capability for 5706, 5706S, 5708, 2140 * 5708S and 5709 rev. A 2141 */ 2142 if ((dev->device == PCI_DEVICE_ID_NX2_5706) || 2143 (dev->device == PCI_DEVICE_ID_NX2_5706S) || 2144 (dev->device == PCI_DEVICE_ID_NX2_5708) || 2145 (dev->device == PCI_DEVICE_ID_NX2_5708S) || 2146 ((dev->device == PCI_DEVICE_ID_NX2_5709) && 2147 (dev->revision & 0xf0) == 0x0)) { 2148 if (dev->vpd) 2149 dev->vpd->len = 0x80; 2150 } 2151 } 2152 2153 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2154 PCI_DEVICE_ID_NX2_5706, 2155 quirk_brcm_570x_limit_vpd); 2156 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2157 PCI_DEVICE_ID_NX2_5706S, 2158 quirk_brcm_570x_limit_vpd); 2159 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2160 PCI_DEVICE_ID_NX2_5708, 2161 quirk_brcm_570x_limit_vpd); 2162 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2163 PCI_DEVICE_ID_NX2_5708S, 2164 quirk_brcm_570x_limit_vpd); 2165 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2166 PCI_DEVICE_ID_NX2_5709, 2167 quirk_brcm_570x_limit_vpd); 2168 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2169 PCI_DEVICE_ID_NX2_5709S, 2170 quirk_brcm_570x_limit_vpd); 2171 2172 static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) 2173 { 2174 u32 rev; 2175 2176 pci_read_config_dword(dev, 0xf4, &rev); 2177 2178 /* Only CAP the MRRS if the device is a 5719 A0 */ 2179 if (rev == 0x05719000) { 2180 int readrq = pcie_get_readrq(dev); 2181 if (readrq > 2048) 2182 pcie_set_readrq(dev, 2048); 2183 } 2184 } 2185 2186 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, 2187 PCI_DEVICE_ID_TIGON3_5719, 2188 quirk_brcm_5719_limit_mrrs); 2189 2190 /* Originally in EDAC sources for i82875P: 2191 * Intel tells BIOS developers to hide device 6 which 2192 * configures the overflow device access containing 2193 * the DRBs - this is where we expose device 6. 2194 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 2195 */ 2196 static void quirk_unhide_mch_dev6(struct pci_dev *dev) 2197 { 2198 u8 reg; 2199 2200 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { 2201 dev_info(&dev->dev, "Enabling MCH 'Overflow' Device\n"); 2202 pci_write_config_byte(dev, 0xF4, reg | 0x02); 2203 } 2204 } 2205 2206 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, 2207 quirk_unhide_mch_dev6); 2208 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, 2209 quirk_unhide_mch_dev6); 2210 2211 #ifdef CONFIG_TILEPRO 2212 /* 2213 * The Tilera TILEmpower tilepro platform needs to set the link speed 2214 * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed 2215 * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe 2216 * capability register of the PEX8624 PCIe switch. The switch 2217 * supports link speed auto negotiation, but falsely sets 2218 * the link speed to 5GT/s. 2219 */ 2220 static void quirk_tile_plx_gen1(struct pci_dev *dev) 2221 { 2222 if (tile_plx_gen1) { 2223 pci_write_config_dword(dev, 0x98, 0x1); 2224 mdelay(50); 2225 } 2226 } 2227 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); 2228 #endif /* CONFIG_TILEPRO */ 2229 2230 #ifdef CONFIG_PCI_MSI 2231 /* Some chipsets do not support MSI. We cannot easily rely on setting 2232 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually 2233 * some other buses controlled by the chipset even if Linux is not 2234 * aware of it. Instead of setting the flag on all buses in the 2235 * machine, simply disable MSI globally. 2236 */ 2237 static void quirk_disable_all_msi(struct pci_dev *dev) 2238 { 2239 pci_no_msi(); 2240 dev_warn(&dev->dev, "MSI quirk detected; MSI disabled\n"); 2241 } 2242 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); 2243 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); 2244 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); 2245 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); 2246 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); 2247 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); 2248 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); 2249 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); 2250 2251 /* Disable MSI on chipsets that are known to not support it */ 2252 static void quirk_disable_msi(struct pci_dev *dev) 2253 { 2254 if (dev->subordinate) { 2255 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2256 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2257 } 2258 } 2259 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); 2260 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); 2261 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); 2262 2263 /* 2264 * The APC bridge device in AMD 780 family northbridges has some random 2265 * OEM subsystem ID in its vendor ID register (erratum 18), so instead 2266 * we use the possible vendor/device IDs of the host bridge for the 2267 * declared quirk, and search for the APC bridge by slot number. 2268 */ 2269 static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) 2270 { 2271 struct pci_dev *apc_bridge; 2272 2273 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); 2274 if (apc_bridge) { 2275 if (apc_bridge->device == 0x9602) 2276 quirk_disable_msi(apc_bridge); 2277 pci_dev_put(apc_bridge); 2278 } 2279 } 2280 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); 2281 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); 2282 2283 /* Go through the list of Hypertransport capabilities and 2284 * return 1 if a HT MSI capability is found and enabled */ 2285 static int msi_ht_cap_enabled(struct pci_dev *dev) 2286 { 2287 int pos, ttl = PCI_FIND_CAP_TTL; 2288 2289 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2290 while (pos && ttl--) { 2291 u8 flags; 2292 2293 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2294 &flags) == 0) { 2295 dev_info(&dev->dev, "Found %s HT MSI Mapping\n", 2296 flags & HT_MSI_FLAGS_ENABLE ? 2297 "enabled" : "disabled"); 2298 return (flags & HT_MSI_FLAGS_ENABLE) != 0; 2299 } 2300 2301 pos = pci_find_next_ht_capability(dev, pos, 2302 HT_CAPTYPE_MSI_MAPPING); 2303 } 2304 return 0; 2305 } 2306 2307 /* Check the hypertransport MSI mapping to know whether MSI is enabled or not */ 2308 static void quirk_msi_ht_cap(struct pci_dev *dev) 2309 { 2310 if (dev->subordinate && !msi_ht_cap_enabled(dev)) { 2311 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2312 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2313 } 2314 } 2315 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, 2316 quirk_msi_ht_cap); 2317 2318 /* The nVidia CK804 chipset may have 2 HT MSI mappings. 2319 * MSI are supported if the MSI capability set in any of these mappings. 2320 */ 2321 static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) 2322 { 2323 struct pci_dev *pdev; 2324 2325 if (!dev->subordinate) 2326 return; 2327 2328 /* check HT MSI cap on this chipset and the root one. 2329 * a single one having MSI is enough to be sure that MSI are supported. 2330 */ 2331 pdev = pci_get_slot(dev->bus, 0); 2332 if (!pdev) 2333 return; 2334 if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { 2335 dev_warn(&dev->dev, "MSI quirk detected; subordinate MSI disabled\n"); 2336 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2337 } 2338 pci_dev_put(pdev); 2339 } 2340 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2341 quirk_nvidia_ck804_msi_ht_cap); 2342 2343 /* Force enable MSI mapping capability on HT bridges */ 2344 static void ht_enable_msi_mapping(struct pci_dev *dev) 2345 { 2346 int pos, ttl = PCI_FIND_CAP_TTL; 2347 2348 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2349 while (pos && ttl--) { 2350 u8 flags; 2351 2352 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2353 &flags) == 0) { 2354 dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); 2355 2356 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2357 flags | HT_MSI_FLAGS_ENABLE); 2358 } 2359 pos = pci_find_next_ht_capability(dev, pos, 2360 HT_CAPTYPE_MSI_MAPPING); 2361 } 2362 } 2363 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 2364 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, 2365 ht_enable_msi_mapping); 2366 2367 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, 2368 ht_enable_msi_mapping); 2369 2370 /* The P5N32-SLI motherboards from Asus have a problem with msi 2371 * for the MCP55 NIC. It is not yet determined whether the msi problem 2372 * also affects other devices. As for now, turn off msi for this device. 2373 */ 2374 static void nvenet_msi_disable(struct pci_dev *dev) 2375 { 2376 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); 2377 2378 if (board_name && 2379 (strstr(board_name, "P5N32-SLI PREMIUM") || 2380 strstr(board_name, "P5N32-E SLI"))) { 2381 dev_info(&dev->dev, "Disabling msi for MCP55 NIC on P5N32-SLI\n"); 2382 dev->no_msi = 1; 2383 } 2384 } 2385 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2386 PCI_DEVICE_ID_NVIDIA_NVENET_15, 2387 nvenet_msi_disable); 2388 2389 /* 2390 * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing 2391 * config register. This register controls the routing of legacy 2392 * interrupts from devices that route through the MCP55. If this register 2393 * is misprogrammed, interrupts are only sent to the BSP, unlike 2394 * conventional systems where the IRQ is broadcast to all online CPUs. Not 2395 * having this register set properly prevents kdump from booting up 2396 * properly, so let's make sure that we have it set correctly. 2397 * Note that this is an undocumented register. 2398 */ 2399 static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) 2400 { 2401 u32 cfg; 2402 2403 if (!pci_find_capability(dev, PCI_CAP_ID_HT)) 2404 return; 2405 2406 pci_read_config_dword(dev, 0x74, &cfg); 2407 2408 if (cfg & ((1 << 2) | (1 << 15))) { 2409 printk(KERN_INFO "Rewriting irq routing register on MCP55\n"); 2410 cfg &= ~((1 << 2) | (1 << 15)); 2411 pci_write_config_dword(dev, 0x74, cfg); 2412 } 2413 } 2414 2415 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2416 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, 2417 nvbridge_check_legacy_irq_routing); 2418 2419 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2420 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, 2421 nvbridge_check_legacy_irq_routing); 2422 2423 static int ht_check_msi_mapping(struct pci_dev *dev) 2424 { 2425 int pos, ttl = PCI_FIND_CAP_TTL; 2426 int found = 0; 2427 2428 /* check if there is HT MSI cap or enabled on this device */ 2429 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2430 while (pos && ttl--) { 2431 u8 flags; 2432 2433 if (found < 1) 2434 found = 1; 2435 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2436 &flags) == 0) { 2437 if (flags & HT_MSI_FLAGS_ENABLE) { 2438 if (found < 2) { 2439 found = 2; 2440 break; 2441 } 2442 } 2443 } 2444 pos = pci_find_next_ht_capability(dev, pos, 2445 HT_CAPTYPE_MSI_MAPPING); 2446 } 2447 2448 return found; 2449 } 2450 2451 static int host_bridge_with_leaf(struct pci_dev *host_bridge) 2452 { 2453 struct pci_dev *dev; 2454 int pos; 2455 int i, dev_no; 2456 int found = 0; 2457 2458 dev_no = host_bridge->devfn >> 3; 2459 for (i = dev_no + 1; i < 0x20; i++) { 2460 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); 2461 if (!dev) 2462 continue; 2463 2464 /* found next host bridge ?*/ 2465 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2466 if (pos != 0) { 2467 pci_dev_put(dev); 2468 break; 2469 } 2470 2471 if (ht_check_msi_mapping(dev)) { 2472 found = 1; 2473 pci_dev_put(dev); 2474 break; 2475 } 2476 pci_dev_put(dev); 2477 } 2478 2479 return found; 2480 } 2481 2482 #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ 2483 #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ 2484 2485 static int is_end_of_ht_chain(struct pci_dev *dev) 2486 { 2487 int pos, ctrl_off; 2488 int end = 0; 2489 u16 flags, ctrl; 2490 2491 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2492 2493 if (!pos) 2494 goto out; 2495 2496 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); 2497 2498 ctrl_off = ((flags >> 10) & 1) ? 2499 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; 2500 pci_read_config_word(dev, pos + ctrl_off, &ctrl); 2501 2502 if (ctrl & (1 << 6)) 2503 end = 1; 2504 2505 out: 2506 return end; 2507 } 2508 2509 static void nv_ht_enable_msi_mapping(struct pci_dev *dev) 2510 { 2511 struct pci_dev *host_bridge; 2512 int pos; 2513 int i, dev_no; 2514 int found = 0; 2515 2516 dev_no = dev->devfn >> 3; 2517 for (i = dev_no; i >= 0; i--) { 2518 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); 2519 if (!host_bridge) 2520 continue; 2521 2522 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2523 if (pos != 0) { 2524 found = 1; 2525 break; 2526 } 2527 pci_dev_put(host_bridge); 2528 } 2529 2530 if (!found) 2531 return; 2532 2533 /* don't enable end_device/host_bridge with leaf directly here */ 2534 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && 2535 host_bridge_with_leaf(host_bridge)) 2536 goto out; 2537 2538 /* root did that ! */ 2539 if (msi_ht_cap_enabled(host_bridge)) 2540 goto out; 2541 2542 ht_enable_msi_mapping(dev); 2543 2544 out: 2545 pci_dev_put(host_bridge); 2546 } 2547 2548 static void ht_disable_msi_mapping(struct pci_dev *dev) 2549 { 2550 int pos, ttl = PCI_FIND_CAP_TTL; 2551 2552 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2553 while (pos && ttl--) { 2554 u8 flags; 2555 2556 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2557 &flags) == 0) { 2558 dev_info(&dev->dev, "Disabling HT MSI Mapping\n"); 2559 2560 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2561 flags & ~HT_MSI_FLAGS_ENABLE); 2562 } 2563 pos = pci_find_next_ht_capability(dev, pos, 2564 HT_CAPTYPE_MSI_MAPPING); 2565 } 2566 } 2567 2568 static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) 2569 { 2570 struct pci_dev *host_bridge; 2571 int pos; 2572 int found; 2573 2574 if (!pci_msi_enabled()) 2575 return; 2576 2577 /* check if there is HT MSI cap or enabled on this device */ 2578 found = ht_check_msi_mapping(dev); 2579 2580 /* no HT MSI CAP */ 2581 if (found == 0) 2582 return; 2583 2584 /* 2585 * HT MSI mapping should be disabled on devices that are below 2586 * a non-Hypertransport host bridge. Locate the host bridge... 2587 */ 2588 host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); 2589 if (host_bridge == NULL) { 2590 dev_warn(&dev->dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); 2591 return; 2592 } 2593 2594 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2595 if (pos != 0) { 2596 /* Host bridge is to HT */ 2597 if (found == 1) { 2598 /* it is not enabled, try to enable it */ 2599 if (all) 2600 ht_enable_msi_mapping(dev); 2601 else 2602 nv_ht_enable_msi_mapping(dev); 2603 } 2604 goto out; 2605 } 2606 2607 /* HT MSI is not enabled */ 2608 if (found == 1) 2609 goto out; 2610 2611 /* Host bridge is not to HT, disable HT MSI mapping on this device */ 2612 ht_disable_msi_mapping(dev); 2613 2614 out: 2615 pci_dev_put(host_bridge); 2616 } 2617 2618 static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) 2619 { 2620 return __nv_msi_ht_cap_quirk(dev, 1); 2621 } 2622 2623 static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) 2624 { 2625 return __nv_msi_ht_cap_quirk(dev, 0); 2626 } 2627 2628 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2629 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2630 2631 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2632 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2633 2634 static void quirk_msi_intx_disable_bug(struct pci_dev *dev) 2635 { 2636 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2637 } 2638 static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) 2639 { 2640 struct pci_dev *p; 2641 2642 /* SB700 MSI issue will be fixed at HW level from revision A21, 2643 * we need check PCI REVISION ID of SMBus controller to get SB700 2644 * revision. 2645 */ 2646 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, 2647 NULL); 2648 if (!p) 2649 return; 2650 2651 if ((p->revision < 0x3B) && (p->revision >= 0x30)) 2652 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2653 pci_dev_put(p); 2654 } 2655 static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) 2656 { 2657 /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ 2658 if (dev->revision < 0x18) { 2659 dev_info(&dev->dev, "set MSI_INTX_DISABLE_BUG flag\n"); 2660 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2661 } 2662 } 2663 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2664 PCI_DEVICE_ID_TIGON3_5780, 2665 quirk_msi_intx_disable_bug); 2666 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2667 PCI_DEVICE_ID_TIGON3_5780S, 2668 quirk_msi_intx_disable_bug); 2669 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2670 PCI_DEVICE_ID_TIGON3_5714, 2671 quirk_msi_intx_disable_bug); 2672 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2673 PCI_DEVICE_ID_TIGON3_5714S, 2674 quirk_msi_intx_disable_bug); 2675 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2676 PCI_DEVICE_ID_TIGON3_5715, 2677 quirk_msi_intx_disable_bug); 2678 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2679 PCI_DEVICE_ID_TIGON3_5715S, 2680 quirk_msi_intx_disable_bug); 2681 2682 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, 2683 quirk_msi_intx_disable_ati_bug); 2684 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, 2685 quirk_msi_intx_disable_ati_bug); 2686 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, 2687 quirk_msi_intx_disable_ati_bug); 2688 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, 2689 quirk_msi_intx_disable_ati_bug); 2690 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, 2691 quirk_msi_intx_disable_ati_bug); 2692 2693 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, 2694 quirk_msi_intx_disable_bug); 2695 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, 2696 quirk_msi_intx_disable_bug); 2697 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, 2698 quirk_msi_intx_disable_bug); 2699 2700 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, 2701 quirk_msi_intx_disable_bug); 2702 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, 2703 quirk_msi_intx_disable_bug); 2704 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, 2705 quirk_msi_intx_disable_bug); 2706 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, 2707 quirk_msi_intx_disable_bug); 2708 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, 2709 quirk_msi_intx_disable_bug); 2710 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, 2711 quirk_msi_intx_disable_bug); 2712 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, 2713 quirk_msi_intx_disable_qca_bug); 2714 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, 2715 quirk_msi_intx_disable_qca_bug); 2716 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, 2717 quirk_msi_intx_disable_qca_bug); 2718 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, 2719 quirk_msi_intx_disable_qca_bug); 2720 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, 2721 quirk_msi_intx_disable_qca_bug); 2722 #endif /* CONFIG_PCI_MSI */ 2723 2724 /* Allow manual resource allocation for PCI hotplug bridges 2725 * via pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For 2726 * some PCI-PCI hotplug bridges, like PLX 6254 (former HINT HB6), 2727 * kernel fails to allocate resources when hotplug device is 2728 * inserted and PCI bus is rescanned. 2729 */ 2730 static void quirk_hotplug_bridge(struct pci_dev *dev) 2731 { 2732 dev->is_hotplug_bridge = 1; 2733 } 2734 2735 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); 2736 2737 /* 2738 * This is a quirk for the Ricoh MMC controller found as a part of 2739 * some mulifunction chips. 2740 2741 * This is very similar and based on the ricoh_mmc driver written by 2742 * Philip Langdale. Thank you for these magic sequences. 2743 * 2744 * These chips implement the four main memory card controllers (SD, MMC, MS, xD) 2745 * and one or both of cardbus or firewire. 2746 * 2747 * It happens that they implement SD and MMC 2748 * support as separate controllers (and PCI functions). The linux SDHCI 2749 * driver supports MMC cards but the chip detects MMC cards in hardware 2750 * and directs them to the MMC controller - so the SDHCI driver never sees 2751 * them. 2752 * 2753 * To get around this, we must disable the useless MMC controller. 2754 * At that point, the SDHCI controller will start seeing them 2755 * It seems to be the case that the relevant PCI registers to deactivate the 2756 * MMC controller live on PCI function 0, which might be the cardbus controller 2757 * or the firewire controller, depending on the particular chip in question 2758 * 2759 * This has to be done early, because as soon as we disable the MMC controller 2760 * other pci functions shift up one level, e.g. function #2 becomes function 2761 * #1, and this will confuse the pci core. 2762 */ 2763 2764 #ifdef CONFIG_MMC_RICOH_MMC 2765 static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) 2766 { 2767 /* disable via cardbus interface */ 2768 u8 write_enable; 2769 u8 write_target; 2770 u8 disable; 2771 2772 /* disable must be done via function #0 */ 2773 if (PCI_FUNC(dev->devfn)) 2774 return; 2775 2776 pci_read_config_byte(dev, 0xB7, &disable); 2777 if (disable & 0x02) 2778 return; 2779 2780 pci_read_config_byte(dev, 0x8E, &write_enable); 2781 pci_write_config_byte(dev, 0x8E, 0xAA); 2782 pci_read_config_byte(dev, 0x8D, &write_target); 2783 pci_write_config_byte(dev, 0x8D, 0xB7); 2784 pci_write_config_byte(dev, 0xB7, disable | 0x02); 2785 pci_write_config_byte(dev, 0x8E, write_enable); 2786 pci_write_config_byte(dev, 0x8D, write_target); 2787 2788 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via cardbus function)\n"); 2789 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2790 } 2791 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2792 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 2793 2794 static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) 2795 { 2796 /* disable via firewire interface */ 2797 u8 write_enable; 2798 u8 disable; 2799 2800 /* disable must be done via function #0 */ 2801 if (PCI_FUNC(dev->devfn)) 2802 return; 2803 /* 2804 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize 2805 * certain types of SD/MMC cards. Lowering the SD base 2806 * clock frequency from 200Mhz to 50Mhz fixes this issue. 2807 * 2808 * 0x150 - SD2.0 mode enable for changing base clock 2809 * frequency to 50Mhz 2810 * 0xe1 - Base clock frequency 2811 * 0x32 - 50Mhz new clock frequency 2812 * 0xf9 - Key register for 0x150 2813 * 0xfc - key register for 0xe1 2814 */ 2815 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || 2816 dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { 2817 pci_write_config_byte(dev, 0xf9, 0xfc); 2818 pci_write_config_byte(dev, 0x150, 0x10); 2819 pci_write_config_byte(dev, 0xf9, 0x00); 2820 pci_write_config_byte(dev, 0xfc, 0x01); 2821 pci_write_config_byte(dev, 0xe1, 0x32); 2822 pci_write_config_byte(dev, 0xfc, 0x00); 2823 2824 dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); 2825 } 2826 2827 pci_read_config_byte(dev, 0xCB, &disable); 2828 2829 if (disable & 0x02) 2830 return; 2831 2832 pci_read_config_byte(dev, 0xCA, &write_enable); 2833 pci_write_config_byte(dev, 0xCA, 0x57); 2834 pci_write_config_byte(dev, 0xCB, disable | 0x02); 2835 pci_write_config_byte(dev, 0xCA, write_enable); 2836 2837 dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); 2838 dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); 2839 2840 } 2841 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2842 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 2843 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2844 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 2845 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2846 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 2847 #endif /*CONFIG_MMC_RICOH_MMC*/ 2848 2849 #ifdef CONFIG_DMAR_TABLE 2850 #define VTUNCERRMSK_REG 0x1ac 2851 #define VTD_MSK_SPEC_ERRORS (1 << 31) 2852 /* 2853 * This is a quirk for masking vt-d spec defined errors to platform error 2854 * handling logic. With out this, platforms using Intel 7500, 5500 chipsets 2855 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based 2856 * on the RAS config settings of the platform) when a vt-d fault happens. 2857 * The resulting SMI caused the system to hang. 2858 * 2859 * VT-d spec related errors are already handled by the VT-d OS code, so no 2860 * need to report the same error through other channels. 2861 */ 2862 static void vtd_mask_spec_errors(struct pci_dev *dev) 2863 { 2864 u32 word; 2865 2866 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); 2867 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); 2868 } 2869 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); 2870 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); 2871 #endif 2872 2873 static void fixup_ti816x_class(struct pci_dev *dev) 2874 { 2875 u32 class = dev->class; 2876 2877 /* TI 816x devices do not have class code set when in PCIe boot mode */ 2878 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; 2879 dev_info(&dev->dev, "PCI class overridden (%#08x -> %#08x)\n", 2880 class, dev->class); 2881 } 2882 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, 2883 PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); 2884 2885 /* Some PCIe devices do not work reliably with the claimed maximum 2886 * payload size supported. 2887 */ 2888 static void fixup_mpss_256(struct pci_dev *dev) 2889 { 2890 dev->pcie_mpss = 1; /* 256 bytes */ 2891 } 2892 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2893 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); 2894 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2895 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); 2896 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 2897 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); 2898 2899 /* Intel 5000 and 5100 Memory controllers have an errata with read completion 2900 * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. 2901 * Since there is no way of knowing what the PCIE MPS on each fabric will be 2902 * until all of the devices are discovered and buses walked, read completion 2903 * coalescing must be disabled. Unfortunately, it cannot be re-enabled because 2904 * it is possible to hotplug a device with MPS of 256B. 2905 */ 2906 static void quirk_intel_mc_errata(struct pci_dev *dev) 2907 { 2908 int err; 2909 u16 rcc; 2910 2911 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 2912 pcie_bus_config == PCIE_BUS_DEFAULT) 2913 return; 2914 2915 /* Intel errata specifies bits to change but does not say what they are. 2916 * Keeping them magical until such time as the registers and values can 2917 * be explained. 2918 */ 2919 err = pci_read_config_word(dev, 0x48, &rcc); 2920 if (err) { 2921 dev_err(&dev->dev, "Error attempting to read the read completion coalescing register\n"); 2922 return; 2923 } 2924 2925 if (!(rcc & (1 << 10))) 2926 return; 2927 2928 rcc &= ~(1 << 10); 2929 2930 err = pci_write_config_word(dev, 0x48, rcc); 2931 if (err) { 2932 dev_err(&dev->dev, "Error attempting to write the read completion coalescing register\n"); 2933 return; 2934 } 2935 2936 pr_info_once("Read completion coalescing disabled due to hardware errata relating to 256B MPS\n"); 2937 } 2938 /* Intel 5000 series memory controllers and ports 2-7 */ 2939 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); 2940 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); 2941 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); 2942 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); 2943 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); 2944 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); 2945 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); 2946 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); 2947 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); 2948 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); 2949 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); 2950 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); 2951 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); 2952 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); 2953 /* Intel 5100 series memory controllers and ports 2-7 */ 2954 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); 2955 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); 2956 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); 2957 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); 2958 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); 2959 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); 2960 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); 2961 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); 2962 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); 2963 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); 2964 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); 2965 2966 2967 /* 2968 * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To 2969 * work around this, query the size it should be configured to by the device and 2970 * modify the resource end to correspond to this new size. 2971 */ 2972 static void quirk_intel_ntb(struct pci_dev *dev) 2973 { 2974 int rc; 2975 u8 val; 2976 2977 rc = pci_read_config_byte(dev, 0x00D0, &val); 2978 if (rc) 2979 return; 2980 2981 dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; 2982 2983 rc = pci_read_config_byte(dev, 0x00D1, &val); 2984 if (rc) 2985 return; 2986 2987 dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; 2988 } 2989 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); 2990 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); 2991 2992 static ktime_t fixup_debug_start(struct pci_dev *dev, 2993 void (*fn)(struct pci_dev *dev)) 2994 { 2995 ktime_t calltime = ktime_set(0, 0); 2996 2997 dev_dbg(&dev->dev, "calling %pF\n", fn); 2998 if (initcall_debug) { 2999 pr_debug("calling %pF @ %i for %s\n", 3000 fn, task_pid_nr(current), dev_name(&dev->dev)); 3001 calltime = ktime_get(); 3002 } 3003 3004 return calltime; 3005 } 3006 3007 static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, 3008 void (*fn)(struct pci_dev *dev)) 3009 { 3010 ktime_t delta, rettime; 3011 unsigned long long duration; 3012 3013 if (initcall_debug) { 3014 rettime = ktime_get(); 3015 delta = ktime_sub(rettime, calltime); 3016 duration = (unsigned long long) ktime_to_ns(delta) >> 10; 3017 pr_debug("pci fixup %pF returned after %lld usecs for %s\n", 3018 fn, duration, dev_name(&dev->dev)); 3019 } 3020 } 3021 3022 /* 3023 * Some BIOS implementations leave the Intel GPU interrupts enabled, 3024 * even though no one is handling them (f.e. i915 driver is never loaded). 3025 * Additionally the interrupt destination is not set up properly 3026 * and the interrupt ends up -somewhere-. 3027 * 3028 * These spurious interrupts are "sticky" and the kernel disables 3029 * the (shared) interrupt line after 100.000+ generated interrupts. 3030 * 3031 * Fix it by disabling the still enabled interrupts. 3032 * This resolves crashes often seen on monitor unplug. 3033 */ 3034 #define I915_DEIER_REG 0x4400c 3035 static void disable_igfx_irq(struct pci_dev *dev) 3036 { 3037 void __iomem *regs = pci_iomap(dev, 0, 0); 3038 if (regs == NULL) { 3039 dev_warn(&dev->dev, "igfx quirk: Can't iomap PCI device\n"); 3040 return; 3041 } 3042 3043 /* Check if any interrupt line is still enabled */ 3044 if (readl(regs + I915_DEIER_REG) != 0) { 3045 dev_warn(&dev->dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); 3046 3047 writel(0, regs + I915_DEIER_REG); 3048 } 3049 3050 pci_iounmap(dev, regs); 3051 } 3052 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); 3053 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); 3054 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); 3055 3056 /* 3057 * PCI devices which are on Intel chips can skip the 10ms delay 3058 * before entering D3 mode. 3059 */ 3060 static void quirk_remove_d3_delay(struct pci_dev *dev) 3061 { 3062 dev->d3_delay = 0; 3063 } 3064 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); 3065 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); 3066 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); 3067 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); 3068 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); 3069 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); 3070 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); 3071 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); 3072 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); 3073 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); 3074 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); 3075 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); 3076 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); 3077 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); 3078 /* Intel Cherrytrail devices do not need 10ms d3_delay */ 3079 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); 3080 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); 3081 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); 3082 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); 3083 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); 3084 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); 3085 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); 3086 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); 3087 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); 3088 /* 3089 * Some devices may pass our check in pci_intx_mask_supported if 3090 * PCI_COMMAND_INTX_DISABLE works though they actually do not properly 3091 * support this feature. 3092 */ 3093 static void quirk_broken_intx_masking(struct pci_dev *dev) 3094 { 3095 dev->broken_intx_masking = 1; 3096 } 3097 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, 0x0030, 3098 quirk_broken_intx_masking); 3099 DECLARE_PCI_FIXUP_HEADER(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ 3100 quirk_broken_intx_masking); 3101 /* 3102 * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) 3103 * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC 3104 * 3105 * RTL8110SC - Fails under PCI device assignment using DisINTx masking. 3106 */ 3107 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_REALTEK, 0x8169, 3108 quirk_broken_intx_masking); 3109 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, 3110 quirk_broken_intx_masking); 3111 3112 static void quirk_no_bus_reset(struct pci_dev *dev) 3113 { 3114 dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; 3115 } 3116 3117 /* 3118 * Atheros AR93xx chips do not behave after a bus reset. The device will 3119 * throw a Link Down error on AER-capable systems and regardless of AER, 3120 * config space of the device is never accessible again and typically 3121 * causes the system to hang or reset when access is attempted. 3122 * http://www.spinics.net/lists/linux-pci/msg34797.html 3123 */ 3124 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); 3125 3126 static void quirk_no_pm_reset(struct pci_dev *dev) 3127 { 3128 /* 3129 * We can't do a bus reset on root bus devices, but an ineffective 3130 * PM reset may be better than nothing. 3131 */ 3132 if (!pci_is_root_bus(dev->bus)) 3133 dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; 3134 } 3135 3136 /* 3137 * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition 3138 * causes a reset (i.e., they advertise NoSoftRst-). This transition seems 3139 * to have no effect on the device: it retains the framebuffer contents and 3140 * monitor sync. Advertising this support makes other layers, like VFIO, 3141 * assume pci_reset_function() is viable for this device. Mark it as 3142 * unavailable to skip it when testing reset methods. 3143 */ 3144 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 3145 PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); 3146 3147 #ifdef CONFIG_ACPI 3148 /* 3149 * Apple: Shutdown Cactus Ridge Thunderbolt controller. 3150 * 3151 * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be 3152 * shutdown before suspend. Otherwise the native host interface (NHI) will not 3153 * be present after resume if a device was plugged in before suspend. 3154 * 3155 * The thunderbolt controller consists of a pcie switch with downstream 3156 * bridges leading to the NHI and to the tunnel pci bridges. 3157 * 3158 * This quirk cuts power to the whole chip. Therefore we have to apply it 3159 * during suspend_noirq of the upstream bridge. 3160 * 3161 * Power is automagically restored before resume. No action is needed. 3162 */ 3163 static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) 3164 { 3165 acpi_handle bridge, SXIO, SXFP, SXLV; 3166 3167 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3168 return; 3169 if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) 3170 return; 3171 bridge = ACPI_HANDLE(&dev->dev); 3172 if (!bridge) 3173 return; 3174 /* 3175 * SXIO and SXLV are present only on machines requiring this quirk. 3176 * TB bridges in external devices might have the same device id as those 3177 * on the host, but they will not have the associated ACPI methods. This 3178 * implicitly checks that we are at the right bridge. 3179 */ 3180 if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) 3181 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) 3182 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) 3183 return; 3184 dev_info(&dev->dev, "quirk: cutting power to thunderbolt controller...\n"); 3185 3186 /* magic sequence */ 3187 acpi_execute_simple_method(SXIO, NULL, 1); 3188 acpi_execute_simple_method(SXFP, NULL, 0); 3189 msleep(300); 3190 acpi_execute_simple_method(SXLV, NULL, 0); 3191 acpi_execute_simple_method(SXIO, NULL, 0); 3192 acpi_execute_simple_method(SXLV, NULL, 0); 3193 } 3194 DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 0x1547, 3195 quirk_apple_poweroff_thunderbolt); 3196 3197 /* 3198 * Apple: Wait for the thunderbolt controller to reestablish pci tunnels. 3199 * 3200 * During suspend the thunderbolt controller is reset and all pci 3201 * tunnels are lost. The NHI driver will try to reestablish all tunnels 3202 * during resume. We have to manually wait for the NHI since there is 3203 * no parent child relationship between the NHI and the tunneled 3204 * bridges. 3205 */ 3206 static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) 3207 { 3208 struct pci_dev *sibling = NULL; 3209 struct pci_dev *nhi = NULL; 3210 3211 if (!dmi_match(DMI_BOARD_VENDOR, "Apple Inc.")) 3212 return; 3213 if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) 3214 return; 3215 /* 3216 * Find the NHI and confirm that we are a bridge on the tb host 3217 * controller and not on a tb endpoint. 3218 */ 3219 sibling = pci_get_slot(dev->bus, 0x0); 3220 if (sibling == dev) 3221 goto out; /* we are the downstream bridge to the NHI */ 3222 if (!sibling || !sibling->subordinate) 3223 goto out; 3224 nhi = pci_get_slot(sibling->subordinate, 0x0); 3225 if (!nhi) 3226 goto out; 3227 if (nhi->vendor != PCI_VENDOR_ID_INTEL 3228 || (nhi->device != 0x1547 && nhi->device != 0x156c) 3229 || nhi->subsystem_vendor != 0x2222 3230 || nhi->subsystem_device != 0x1111) 3231 goto out; 3232 dev_info(&dev->dev, "quirk: waiting for thunderbolt to reestablish PCI tunnels...\n"); 3233 device_pm_wait_for_dev(&dev->dev, &nhi->dev); 3234 out: 3235 pci_dev_put(nhi); 3236 pci_dev_put(sibling); 3237 } 3238 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x1547, 3239 quirk_apple_wait_for_thunderbolt); 3240 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 0x156d, 3241 quirk_apple_wait_for_thunderbolt); 3242 #endif 3243 3244 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, 3245 struct pci_fixup *end) 3246 { 3247 ktime_t calltime; 3248 3249 for (; f < end; f++) 3250 if ((f->class == (u32) (dev->class >> f->class_shift) || 3251 f->class == (u32) PCI_ANY_ID) && 3252 (f->vendor == dev->vendor || 3253 f->vendor == (u16) PCI_ANY_ID) && 3254 (f->device == dev->device || 3255 f->device == (u16) PCI_ANY_ID)) { 3256 calltime = fixup_debug_start(dev, f->hook); 3257 f->hook(dev); 3258 fixup_debug_report(dev, calltime, f->hook); 3259 } 3260 } 3261 3262 extern struct pci_fixup __start_pci_fixups_early[]; 3263 extern struct pci_fixup __end_pci_fixups_early[]; 3264 extern struct pci_fixup __start_pci_fixups_header[]; 3265 extern struct pci_fixup __end_pci_fixups_header[]; 3266 extern struct pci_fixup __start_pci_fixups_final[]; 3267 extern struct pci_fixup __end_pci_fixups_final[]; 3268 extern struct pci_fixup __start_pci_fixups_enable[]; 3269 extern struct pci_fixup __end_pci_fixups_enable[]; 3270 extern struct pci_fixup __start_pci_fixups_resume[]; 3271 extern struct pci_fixup __end_pci_fixups_resume[]; 3272 extern struct pci_fixup __start_pci_fixups_resume_early[]; 3273 extern struct pci_fixup __end_pci_fixups_resume_early[]; 3274 extern struct pci_fixup __start_pci_fixups_suspend[]; 3275 extern struct pci_fixup __end_pci_fixups_suspend[]; 3276 extern struct pci_fixup __start_pci_fixups_suspend_late[]; 3277 extern struct pci_fixup __end_pci_fixups_suspend_late[]; 3278 3279 static bool pci_apply_fixup_final_quirks; 3280 3281 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) 3282 { 3283 struct pci_fixup *start, *end; 3284 3285 switch (pass) { 3286 case pci_fixup_early: 3287 start = __start_pci_fixups_early; 3288 end = __end_pci_fixups_early; 3289 break; 3290 3291 case pci_fixup_header: 3292 start = __start_pci_fixups_header; 3293 end = __end_pci_fixups_header; 3294 break; 3295 3296 case pci_fixup_final: 3297 if (!pci_apply_fixup_final_quirks) 3298 return; 3299 start = __start_pci_fixups_final; 3300 end = __end_pci_fixups_final; 3301 break; 3302 3303 case pci_fixup_enable: 3304 start = __start_pci_fixups_enable; 3305 end = __end_pci_fixups_enable; 3306 break; 3307 3308 case pci_fixup_resume: 3309 start = __start_pci_fixups_resume; 3310 end = __end_pci_fixups_resume; 3311 break; 3312 3313 case pci_fixup_resume_early: 3314 start = __start_pci_fixups_resume_early; 3315 end = __end_pci_fixups_resume_early; 3316 break; 3317 3318 case pci_fixup_suspend: 3319 start = __start_pci_fixups_suspend; 3320 end = __end_pci_fixups_suspend; 3321 break; 3322 3323 case pci_fixup_suspend_late: 3324 start = __start_pci_fixups_suspend_late; 3325 end = __end_pci_fixups_suspend_late; 3326 break; 3327 3328 default: 3329 /* stupid compiler warning, you would think with an enum... */ 3330 return; 3331 } 3332 pci_do_fixups(dev, start, end); 3333 } 3334 EXPORT_SYMBOL(pci_fixup_device); 3335 3336 3337 static int __init pci_apply_final_quirks(void) 3338 { 3339 struct pci_dev *dev = NULL; 3340 u8 cls = 0; 3341 u8 tmp; 3342 3343 if (pci_cache_line_size) 3344 printk(KERN_DEBUG "PCI: CLS %u bytes\n", 3345 pci_cache_line_size << 2); 3346 3347 pci_apply_fixup_final_quirks = true; 3348 for_each_pci_dev(dev) { 3349 pci_fixup_device(pci_fixup_final, dev); 3350 /* 3351 * If arch hasn't set it explicitly yet, use the CLS 3352 * value shared by all PCI devices. If there's a 3353 * mismatch, fall back to the default value. 3354 */ 3355 if (!pci_cache_line_size) { 3356 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); 3357 if (!cls) 3358 cls = tmp; 3359 if (!tmp || cls == tmp) 3360 continue; 3361 3362 printk(KERN_DEBUG "PCI: CLS mismatch (%u != %u), using %u bytes\n", 3363 cls << 2, tmp << 2, 3364 pci_dfl_cache_line_size << 2); 3365 pci_cache_line_size = pci_dfl_cache_line_size; 3366 } 3367 } 3368 3369 if (!pci_cache_line_size) { 3370 printk(KERN_DEBUG "PCI: CLS %u bytes, default %u\n", 3371 cls << 2, pci_dfl_cache_line_size << 2); 3372 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; 3373 } 3374 3375 return 0; 3376 } 3377 3378 fs_initcall_sync(pci_apply_final_quirks); 3379 3380 /* 3381 * Followings are device-specific reset methods which can be used to 3382 * reset a single function if other methods (e.g. FLR, PM D0->D3) are 3383 * not available. 3384 */ 3385 static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) 3386 { 3387 /* 3388 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf 3389 * 3390 * The 82599 supports FLR on VFs, but FLR support is reported only 3391 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). 3392 * Therefore, we can't use pcie_flr(), which checks the VF DEVCAP. 3393 */ 3394 3395 if (probe) 3396 return 0; 3397 3398 if (!pci_wait_for_pending_transaction(dev)) 3399 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3400 3401 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3402 3403 msleep(100); 3404 3405 return 0; 3406 } 3407 3408 #include "../gpu/drm/i915/i915_reg.h" 3409 #define MSG_CTL 0x45010 3410 #define NSDE_PWR_STATE 0xd0100 3411 #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ 3412 3413 static int reset_ivb_igd(struct pci_dev *dev, int probe) 3414 { 3415 void __iomem *mmio_base; 3416 unsigned long timeout; 3417 u32 val; 3418 3419 if (probe) 3420 return 0; 3421 3422 mmio_base = pci_iomap(dev, 0, 0); 3423 if (!mmio_base) 3424 return -ENOMEM; 3425 3426 iowrite32(0x00000002, mmio_base + MSG_CTL); 3427 3428 /* 3429 * Clobbering SOUTH_CHICKEN2 register is fine only if the next 3430 * driver loaded sets the right bits. However, this's a reset and 3431 * the bits have been set by i915 previously, so we clobber 3432 * SOUTH_CHICKEN2 register directly here. 3433 */ 3434 iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); 3435 3436 val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; 3437 iowrite32(val, mmio_base + PCH_PP_CONTROL); 3438 3439 timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); 3440 do { 3441 val = ioread32(mmio_base + PCH_PP_STATUS); 3442 if ((val & 0xb0000000) == 0) 3443 goto reset_complete; 3444 msleep(10); 3445 } while (time_before(jiffies, timeout)); 3446 dev_warn(&dev->dev, "timeout during reset\n"); 3447 3448 reset_complete: 3449 iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); 3450 3451 pci_iounmap(dev, mmio_base); 3452 return 0; 3453 } 3454 3455 /* 3456 * Device-specific reset method for Chelsio T4-based adapters. 3457 */ 3458 static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) 3459 { 3460 u16 old_command; 3461 u16 msix_flags; 3462 3463 /* 3464 * If this isn't a Chelsio T4-based device, return -ENOTTY indicating 3465 * that we have no device-specific reset method. 3466 */ 3467 if ((dev->device & 0xf000) != 0x4000) 3468 return -ENOTTY; 3469 3470 /* 3471 * If this is the "probe" phase, return 0 indicating that we can 3472 * reset this device. 3473 */ 3474 if (probe) 3475 return 0; 3476 3477 /* 3478 * T4 can wedge if there are DMAs in flight within the chip and Bus 3479 * Master has been disabled. We need to have it on till the Function 3480 * Level Reset completes. (BUS_MASTER is disabled in 3481 * pci_reset_function()). 3482 */ 3483 pci_read_config_word(dev, PCI_COMMAND, &old_command); 3484 pci_write_config_word(dev, PCI_COMMAND, 3485 old_command | PCI_COMMAND_MASTER); 3486 3487 /* 3488 * Perform the actual device function reset, saving and restoring 3489 * configuration information around the reset. 3490 */ 3491 pci_save_state(dev); 3492 3493 /* 3494 * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts 3495 * are disabled when an MSI-X interrupt message needs to be delivered. 3496 * So we briefly re-enable MSI-X interrupts for the duration of the 3497 * FLR. The pci_restore_state() below will restore the original 3498 * MSI-X state. 3499 */ 3500 pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); 3501 if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) 3502 pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, 3503 msix_flags | 3504 PCI_MSIX_FLAGS_ENABLE | 3505 PCI_MSIX_FLAGS_MASKALL); 3506 3507 /* 3508 * Start of pcie_flr() code sequence. This reset code is a copy of 3509 * the guts of pcie_flr() because that's not an exported function. 3510 */ 3511 3512 if (!pci_wait_for_pending_transaction(dev)) 3513 dev_err(&dev->dev, "transaction is not cleared; proceeding with reset anyway\n"); 3514 3515 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); 3516 msleep(100); 3517 3518 /* 3519 * End of pcie_flr() code sequence. 3520 */ 3521 3522 /* 3523 * Restore the configuration information (BAR values, etc.) including 3524 * the original PCI Configuration Space Command word, and return 3525 * success. 3526 */ 3527 pci_restore_state(dev); 3528 pci_write_config_word(dev, PCI_COMMAND, old_command); 3529 return 0; 3530 } 3531 3532 #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed 3533 #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 3534 #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 3535 3536 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { 3537 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, 3538 reset_intel_82599_sfp_virtfn }, 3539 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, 3540 reset_ivb_igd }, 3541 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, 3542 reset_ivb_igd }, 3543 { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 3544 reset_chelsio_generic_dev }, 3545 { 0 } 3546 }; 3547 3548 /* 3549 * These device-specific reset methods are here rather than in a driver 3550 * because when a host assigns a device to a guest VM, the host may need 3551 * to reset the device but probably doesn't have a driver for it. 3552 */ 3553 int pci_dev_specific_reset(struct pci_dev *dev, int probe) 3554 { 3555 const struct pci_dev_reset_methods *i; 3556 3557 for (i = pci_dev_reset_methods; i->reset; i++) { 3558 if ((i->vendor == dev->vendor || 3559 i->vendor == (u16)PCI_ANY_ID) && 3560 (i->device == dev->device || 3561 i->device == (u16)PCI_ANY_ID)) 3562 return i->reset(dev, probe); 3563 } 3564 3565 return -ENOTTY; 3566 } 3567 3568 static void quirk_dma_func0_alias(struct pci_dev *dev) 3569 { 3570 if (PCI_FUNC(dev->devfn) != 0) { 3571 dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0); 3572 dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; 3573 } 3574 } 3575 3576 /* 3577 * https://bugzilla.redhat.com/show_bug.cgi?id=605888 3578 * 3579 * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. 3580 */ 3581 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); 3582 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); 3583 3584 static void quirk_dma_func1_alias(struct pci_dev *dev) 3585 { 3586 if (PCI_FUNC(dev->devfn) != 1) { 3587 dev->dma_alias_devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 1); 3588 dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; 3589 } 3590 } 3591 3592 /* 3593 * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some 3594 * SKUs function 1 is present and is a legacy IDE controller, in other 3595 * SKUs this function is not present, making this a ghost requester. 3596 * https://bugzilla.kernel.org/show_bug.cgi?id=42679 3597 */ 3598 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, 3599 quirk_dma_func1_alias); 3600 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, 3601 quirk_dma_func1_alias); 3602 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ 3603 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, 3604 quirk_dma_func1_alias); 3605 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ 3606 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, 3607 quirk_dma_func1_alias); 3608 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ 3609 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, 3610 quirk_dma_func1_alias); 3611 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ 3612 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, 3613 quirk_dma_func1_alias); 3614 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ 3615 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, 3616 quirk_dma_func1_alias); 3617 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, 3618 quirk_dma_func1_alias); 3619 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ 3620 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, 3621 PCI_DEVICE_ID_JMICRON_JMB388_ESD, 3622 quirk_dma_func1_alias); 3623 3624 /* 3625 * Some devices DMA with the wrong devfn, not just the wrong function. 3626 * quirk_fixed_dma_alias() uses this table to create fixed aliases, where 3627 * the alias is "fixed" and independent of the device devfn. 3628 * 3629 * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O 3630 * processor. To software, this appears as a PCIe-to-PCI/X bridge with a 3631 * single device on the secondary bus. In reality, the single exposed 3632 * device at 0e.0 is the Address Translation Unit (ATU) of the controller 3633 * that provides a bridge to the internal bus of the I/O processor. The 3634 * controller supports private devices, which can be hidden from PCI config 3635 * space. In the case of the Adaptec 3405, a private device at 01.0 3636 * appears to be the DMA engine, which therefore needs to become a DMA 3637 * alias for the device. 3638 */ 3639 static const struct pci_device_id fixed_dma_alias_tbl[] = { 3640 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 3641 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ 3642 .driver_data = PCI_DEVFN(1, 0) }, 3643 { 0 } 3644 }; 3645 3646 static void quirk_fixed_dma_alias(struct pci_dev *dev) 3647 { 3648 const struct pci_device_id *id; 3649 3650 id = pci_match_id(fixed_dma_alias_tbl, dev); 3651 if (id) { 3652 dev->dma_alias_devfn = id->driver_data; 3653 dev->dev_flags |= PCI_DEV_FLAGS_DMA_ALIAS_DEVFN; 3654 dev_info(&dev->dev, "Enabling fixed DMA alias to %02x.%d\n", 3655 PCI_SLOT(dev->dma_alias_devfn), 3656 PCI_FUNC(dev->dma_alias_devfn)); 3657 } 3658 } 3659 3660 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); 3661 3662 /* 3663 * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in 3664 * using the wrong DMA alias for the device. Some of these devices can be 3665 * used as either forward or reverse bridges, so we need to test whether the 3666 * device is operating in the correct mode. We could probably apply this 3667 * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test 3668 * is for a non-root, non-PCIe bridge where the upstream device is PCIe and 3669 * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. 3670 */ 3671 static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) 3672 { 3673 if (!pci_is_root_bus(pdev->bus) && 3674 pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && 3675 !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && 3676 pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) 3677 pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; 3678 } 3679 /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ 3680 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, 3681 quirk_use_pcie_bridge_dma_alias); 3682 /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ 3683 DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); 3684 /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ 3685 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); 3686 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ 3687 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); 3688 3689 /* 3690 * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) 3691 * class code. Fix it. 3692 */ 3693 static void quirk_tw686x_class(struct pci_dev *pdev) 3694 { 3695 u32 class = pdev->class; 3696 3697 /* Use "Multimedia controller" class */ 3698 pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; 3699 dev_info(&pdev->dev, "TW686x PCI class overridden (%#08x -> %#08x)\n", 3700 class, pdev->class); 3701 } 3702 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, 3703 quirk_tw686x_class); 3704 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, 3705 quirk_tw686x_class); 3706 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, 3707 quirk_tw686x_class); 3708 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, 3709 quirk_tw686x_class); 3710 3711 /* 3712 * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same 3713 * values for the Attribute as were supplied in the header of the 3714 * corresponding Request, except as explicitly allowed when IDO is used." 3715 * 3716 * If a non-compliant device generates a completion with a different 3717 * attribute than the request, the receiver may accept it (which itself 3718 * seems non-compliant based on sec 2.3.2), or it may handle it as a 3719 * Malformed TLP or an Unexpected Completion, which will probably lead to a 3720 * device access timeout. 3721 * 3722 * If the non-compliant device generates completions with zero attributes 3723 * (instead of copying the attributes from the request), we can work around 3724 * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in 3725 * upstream devices so they always generate requests with zero attributes. 3726 * 3727 * This affects other devices under the same Root Port, but since these 3728 * attributes are performance hints, there should be no functional problem. 3729 * 3730 * Note that Configuration Space accesses are never supposed to have TLP 3731 * Attributes, so we're safe waiting till after any Configuration Space 3732 * accesses to do the Root Port fixup. 3733 */ 3734 static void quirk_disable_root_port_attributes(struct pci_dev *pdev) 3735 { 3736 struct pci_dev *root_port = pci_find_pcie_root_port(pdev); 3737 3738 if (!root_port) { 3739 dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); 3740 return; 3741 } 3742 3743 dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", 3744 dev_name(&pdev->dev)); 3745 pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, 3746 PCI_EXP_DEVCTL_RELAX_EN | 3747 PCI_EXP_DEVCTL_NOSNOOP_EN, 0); 3748 } 3749 3750 /* 3751 * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the 3752 * Completion it generates. 3753 */ 3754 static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) 3755 { 3756 /* 3757 * This mask/compare operation selects for Physical Function 4 on a 3758 * T5. We only need to fix up the Root Port once for any of the 3759 * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely 3760 * 0x54xx so we use that one, 3761 */ 3762 if ((pdev->device & 0xff00) == 0x5400) 3763 quirk_disable_root_port_attributes(pdev); 3764 } 3765 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 3766 quirk_chelsio_T5_disable_root_port_attributes); 3767 3768 /* 3769 * AMD has indicated that the devices below do not support peer-to-peer 3770 * in any system where they are found in the southbridge with an AMD 3771 * IOMMU in the system. Multifunction devices that do not support 3772 * peer-to-peer between functions can claim to support a subset of ACS. 3773 * Such devices effectively enable request redirect (RR) and completion 3774 * redirect (CR) since all transactions are redirected to the upstream 3775 * root complex. 3776 * 3777 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 3778 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 3779 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 3780 * 3781 * 1002:4385 SBx00 SMBus Controller 3782 * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller 3783 * 1002:4383 SBx00 Azalia (Intel HDA) 3784 * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller 3785 * 1002:4384 SBx00 PCI to PCI Bridge 3786 * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 3787 * 3788 * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 3789 * 3790 * 1022:780f [AMD] FCH PCI Bridge 3791 * 1022:7809 [AMD] FCH USB OHCI Controller 3792 */ 3793 static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) 3794 { 3795 #ifdef CONFIG_ACPI 3796 struct acpi_table_header *header = NULL; 3797 acpi_status status; 3798 3799 /* Targeting multifunction devices on the SB (appears on root bus) */ 3800 if (!dev->multifunction || !pci_is_root_bus(dev->bus)) 3801 return -ENODEV; 3802 3803 /* The IVRS table describes the AMD IOMMU */ 3804 status = acpi_get_table("IVRS", 0, &header); 3805 if (ACPI_FAILURE(status)) 3806 return -ENODEV; 3807 3808 /* Filter out flags not applicable to multifunction */ 3809 acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); 3810 3811 return acs_flags & ~(PCI_ACS_RR | PCI_ACS_CR) ? 0 : 1; 3812 #else 3813 return -ENODEV; 3814 #endif 3815 } 3816 3817 /* 3818 * Many Intel PCH root ports do provide ACS-like features to disable peer 3819 * transactions and validate bus numbers in requests, but do not provide an 3820 * actual PCIe ACS capability. This is the list of device IDs known to fall 3821 * into that category as provided by Intel in Red Hat bugzilla 1037684. 3822 */ 3823 static const u16 pci_quirk_intel_pch_acs_ids[] = { 3824 /* Ibexpeak PCH */ 3825 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, 3826 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, 3827 /* Cougarpoint PCH */ 3828 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, 3829 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, 3830 /* Pantherpoint PCH */ 3831 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, 3832 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, 3833 /* Lynxpoint-H PCH */ 3834 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, 3835 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, 3836 /* Lynxpoint-LP PCH */ 3837 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, 3838 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, 3839 /* Wildcat PCH */ 3840 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, 3841 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, 3842 /* Patsburg (X79) PCH */ 3843 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, 3844 /* Wellsburg (X99) PCH */ 3845 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, 3846 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, 3847 /* Lynx Point (9 series) PCH */ 3848 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, 3849 }; 3850 3851 static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) 3852 { 3853 int i; 3854 3855 /* Filter out a few obvious non-matches first */ 3856 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 3857 return false; 3858 3859 for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) 3860 if (pci_quirk_intel_pch_acs_ids[i] == dev->device) 3861 return true; 3862 3863 return false; 3864 } 3865 3866 #define INTEL_PCH_ACS_FLAGS (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_SV) 3867 3868 static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) 3869 { 3870 u16 flags = dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK ? 3871 INTEL_PCH_ACS_FLAGS : 0; 3872 3873 if (!pci_quirk_intel_pch_acs_match(dev)) 3874 return -ENOTTY; 3875 3876 return acs_flags & ~flags ? 0 : 1; 3877 } 3878 3879 static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) 3880 { 3881 /* 3882 * SV, TB, and UF are not relevant to multifunction endpoints. 3883 * 3884 * Multifunction devices are only required to implement RR, CR, and DT 3885 * in their ACS capability if they support peer-to-peer transactions. 3886 * Devices matching this quirk have been verified by the vendor to not 3887 * perform peer-to-peer with other functions, allowing us to mask out 3888 * these bits as if they were unimplemented in the ACS capability. 3889 */ 3890 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 3891 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 3892 3893 return acs_flags ? 0 : 1; 3894 } 3895 3896 static const struct pci_dev_acs_enabled { 3897 u16 vendor; 3898 u16 device; 3899 int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); 3900 } pci_dev_acs_enabled[] = { 3901 { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, 3902 { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, 3903 { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, 3904 { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, 3905 { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, 3906 { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, 3907 { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, 3908 { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, 3909 { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, 3910 { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, 3911 { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, 3912 { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, 3913 { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, 3914 { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, 3915 { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, 3916 { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, 3917 { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, 3918 { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, 3919 { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, 3920 { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, 3921 { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, 3922 { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, 3923 { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, 3924 { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, 3925 { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, 3926 { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, 3927 { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, 3928 { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, 3929 { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, 3930 { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, 3931 /* 82580 */ 3932 { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, 3933 { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, 3934 { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, 3935 { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, 3936 { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, 3937 { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, 3938 { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, 3939 /* 82576 */ 3940 { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, 3941 { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, 3942 { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, 3943 { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, 3944 { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, 3945 { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, 3946 { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, 3947 { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, 3948 /* 82575 */ 3949 { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, 3950 { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, 3951 { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, 3952 /* I350 */ 3953 { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, 3954 { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, 3955 { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, 3956 { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, 3957 /* 82571 (Quads omitted due to non-ACS switch) */ 3958 { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, 3959 { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, 3960 { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, 3961 { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, 3962 /* I219 */ 3963 { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, 3964 { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, 3965 /* Intel PCH root ports */ 3966 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, 3967 { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ 3968 { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ 3969 { 0 } 3970 }; 3971 3972 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) 3973 { 3974 const struct pci_dev_acs_enabled *i; 3975 int ret; 3976 3977 /* 3978 * Allow devices that do not expose standard PCIe ACS capabilities 3979 * or control to indicate their support here. Multi-function express 3980 * devices which do not allow internal peer-to-peer between functions, 3981 * but do not implement PCIe ACS may wish to return true here. 3982 */ 3983 for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { 3984 if ((i->vendor == dev->vendor || 3985 i->vendor == (u16)PCI_ANY_ID) && 3986 (i->device == dev->device || 3987 i->device == (u16)PCI_ANY_ID)) { 3988 ret = i->acs_enabled(dev, acs_flags); 3989 if (ret >= 0) 3990 return ret; 3991 } 3992 } 3993 3994 return -ENOTTY; 3995 } 3996 3997 /* Config space offset of Root Complex Base Address register */ 3998 #define INTEL_LPC_RCBA_REG 0xf0 3999 /* 31:14 RCBA address */ 4000 #define INTEL_LPC_RCBA_MASK 0xffffc000 4001 /* RCBA Enable */ 4002 #define INTEL_LPC_RCBA_ENABLE (1 << 0) 4003 4004 /* Backbone Scratch Pad Register */ 4005 #define INTEL_BSPR_REG 0x1104 4006 /* Backbone Peer Non-Posted Disable */ 4007 #define INTEL_BSPR_REG_BPNPD (1 << 8) 4008 /* Backbone Peer Posted Disable */ 4009 #define INTEL_BSPR_REG_BPPD (1 << 9) 4010 4011 /* Upstream Peer Decode Configuration Register */ 4012 #define INTEL_UPDCR_REG 0x1114 4013 /* 5:0 Peer Decode Enable bits */ 4014 #define INTEL_UPDCR_REG_MASK 0x3f 4015 4016 static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) 4017 { 4018 u32 rcba, bspr, updcr; 4019 void __iomem *rcba_mem; 4020 4021 /* 4022 * Read the RCBA register from the LPC (D31:F0). PCH root ports 4023 * are D28:F* and therefore get probed before LPC, thus we can't 4024 * use pci_get_slot/pci_read_config_dword here. 4025 */ 4026 pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), 4027 INTEL_LPC_RCBA_REG, &rcba); 4028 if (!(rcba & INTEL_LPC_RCBA_ENABLE)) 4029 return -EINVAL; 4030 4031 rcba_mem = ioremap_nocache(rcba & INTEL_LPC_RCBA_MASK, 4032 PAGE_ALIGN(INTEL_UPDCR_REG)); 4033 if (!rcba_mem) 4034 return -ENOMEM; 4035 4036 /* 4037 * The BSPR can disallow peer cycles, but it's set by soft strap and 4038 * therefore read-only. If both posted and non-posted peer cycles are 4039 * disallowed, we're ok. If either are allowed, then we need to use 4040 * the UPDCR to disable peer decodes for each port. This provides the 4041 * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF 4042 */ 4043 bspr = readl(rcba_mem + INTEL_BSPR_REG); 4044 bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; 4045 if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { 4046 updcr = readl(rcba_mem + INTEL_UPDCR_REG); 4047 if (updcr & INTEL_UPDCR_REG_MASK) { 4048 dev_info(&dev->dev, "Disabling UPDCR peer decodes\n"); 4049 updcr &= ~INTEL_UPDCR_REG_MASK; 4050 writel(updcr, rcba_mem + INTEL_UPDCR_REG); 4051 } 4052 } 4053 4054 iounmap(rcba_mem); 4055 return 0; 4056 } 4057 4058 /* Miscellaneous Port Configuration register */ 4059 #define INTEL_MPC_REG 0xd8 4060 /* MPC: Invalid Receive Bus Number Check Enable */ 4061 #define INTEL_MPC_REG_IRBNCE (1 << 26) 4062 4063 static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) 4064 { 4065 u32 mpc; 4066 4067 /* 4068 * When enabled, the IRBNCE bit of the MPC register enables the 4069 * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which 4070 * ensures that requester IDs fall within the bus number range 4071 * of the bridge. Enable if not already. 4072 */ 4073 pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); 4074 if (!(mpc & INTEL_MPC_REG_IRBNCE)) { 4075 dev_info(&dev->dev, "Enabling MPC IRBNCE\n"); 4076 mpc |= INTEL_MPC_REG_IRBNCE; 4077 pci_write_config_word(dev, INTEL_MPC_REG, mpc); 4078 } 4079 } 4080 4081 static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) 4082 { 4083 if (!pci_quirk_intel_pch_acs_match(dev)) 4084 return -ENOTTY; 4085 4086 if (pci_quirk_enable_intel_lpc_acs(dev)) { 4087 dev_warn(&dev->dev, "Failed to enable Intel PCH ACS quirk\n"); 4088 return 0; 4089 } 4090 4091 pci_quirk_enable_intel_rp_mpc_acs(dev); 4092 4093 dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; 4094 4095 dev_info(&dev->dev, "Intel PCH root port ACS workaround enabled\n"); 4096 4097 return 0; 4098 } 4099 4100 static const struct pci_dev_enable_acs { 4101 u16 vendor; 4102 u16 device; 4103 int (*enable_acs)(struct pci_dev *dev); 4104 } pci_dev_enable_acs[] = { 4105 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_enable_intel_pch_acs }, 4106 { 0 } 4107 }; 4108 4109 void pci_dev_specific_enable_acs(struct pci_dev *dev) 4110 { 4111 const struct pci_dev_enable_acs *i; 4112 int ret; 4113 4114 for (i = pci_dev_enable_acs; i->enable_acs; i++) { 4115 if ((i->vendor == dev->vendor || 4116 i->vendor == (u16)PCI_ANY_ID) && 4117 (i->device == dev->device || 4118 i->device == (u16)PCI_ANY_ID)) { 4119 ret = i->enable_acs(dev); 4120 if (ret >= 0) 4121 return; 4122 } 4123 } 4124 } 4125 4126 /* 4127 * The PCI capabilities list for Intel DH895xCC VFs (device id 0x0443) with 4128 * QuickAssist Technology (QAT) is prematurely terminated in hardware. The 4129 * Next Capability pointer in the MSI Capability Structure should point to 4130 * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating 4131 * the list. 4132 */ 4133 static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) 4134 { 4135 int pos, i = 0; 4136 u8 next_cap; 4137 u16 reg16, *cap; 4138 struct pci_cap_saved_state *state; 4139 4140 /* Bail if the hardware bug is fixed */ 4141 if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) 4142 return; 4143 4144 /* Bail if MSI Capability Structure is not found for some reason */ 4145 pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); 4146 if (!pos) 4147 return; 4148 4149 /* 4150 * Bail if Next Capability pointer in the MSI Capability Structure 4151 * is not the expected incorrect 0x00. 4152 */ 4153 pci_read_config_byte(pdev, pos + 1, &next_cap); 4154 if (next_cap) 4155 return; 4156 4157 /* 4158 * PCIe Capability Structure is expected to be at 0x50 and should 4159 * terminate the list (Next Capability pointer is 0x00). Verify 4160 * Capability Id and Next Capability pointer is as expected. 4161 * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() 4162 * to correctly set kernel data structures which have already been 4163 * set incorrectly due to the hardware bug. 4164 */ 4165 pos = 0x50; 4166 pci_read_config_word(pdev, pos, ®16); 4167 if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { 4168 u32 status; 4169 #ifndef PCI_EXP_SAVE_REGS 4170 #define PCI_EXP_SAVE_REGS 7 4171 #endif 4172 int size = PCI_EXP_SAVE_REGS * sizeof(u16); 4173 4174 pdev->pcie_cap = pos; 4175 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 4176 pdev->pcie_flags_reg = reg16; 4177 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); 4178 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; 4179 4180 pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; 4181 if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != 4182 PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) 4183 pdev->cfg_size = PCI_CFG_SPACE_SIZE; 4184 4185 if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) 4186 return; 4187 4188 /* 4189 * Save PCIE cap 4190 */ 4191 state = kzalloc(sizeof(*state) + size, GFP_KERNEL); 4192 if (!state) 4193 return; 4194 4195 state->cap.cap_nr = PCI_CAP_ID_EXP; 4196 state->cap.cap_extended = 0; 4197 state->cap.size = size; 4198 cap = (u16 *)&state->cap.data[0]; 4199 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); 4200 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); 4201 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); 4202 pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); 4203 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); 4204 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); 4205 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); 4206 hlist_add_head(&state->next, &pdev->saved_cap_space); 4207 } 4208 } 4209 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); 4210