1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * This file contains work-arounds for many known PCI hardware bugs. 4 * Devices present only on certain architectures (host bridges et cetera) 5 * should be handled in arch-specific code. 6 * 7 * Note: any quirks for hotpluggable devices must _NOT_ be declared __init. 8 * 9 * Copyright (c) 1999 Martin Mares <mj@ucw.cz> 10 * 11 * Init/reset quirks for USB host controllers should be in the USB quirks 12 * file, where their drivers can use them. 13 */ 14 15 #include <linux/types.h> 16 #include <linux/kernel.h> 17 #include <linux/export.h> 18 #include <linux/pci.h> 19 #include <linux/init.h> 20 #include <linux/delay.h> 21 #include <linux/acpi.h> 22 #include <linux/dmi.h> 23 #include <linux/ioport.h> 24 #include <linux/sched.h> 25 #include <linux/ktime.h> 26 #include <linux/mm.h> 27 #include <linux/nvme.h> 28 #include <linux/platform_data/x86/apple.h> 29 #include <linux/pm_runtime.h> 30 #include <linux/switchtec.h> 31 #include <asm/dma.h> /* isa_dma_bridge_buggy */ 32 #include "pci.h" 33 34 static ktime_t fixup_debug_start(struct pci_dev *dev, 35 void (*fn)(struct pci_dev *dev)) 36 { 37 if (initcall_debug) 38 pci_info(dev, "calling %pS @ %i\n", fn, task_pid_nr(current)); 39 40 return ktime_get(); 41 } 42 43 static void fixup_debug_report(struct pci_dev *dev, ktime_t calltime, 44 void (*fn)(struct pci_dev *dev)) 45 { 46 ktime_t delta, rettime; 47 unsigned long long duration; 48 49 rettime = ktime_get(); 50 delta = ktime_sub(rettime, calltime); 51 duration = (unsigned long long) ktime_to_ns(delta) >> 10; 52 if (initcall_debug || duration > 10000) 53 pci_info(dev, "%pS took %lld usecs\n", fn, duration); 54 } 55 56 static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, 57 struct pci_fixup *end) 58 { 59 ktime_t calltime; 60 61 for (; f < end; f++) 62 if ((f->class == (u32) (dev->class >> f->class_shift) || 63 f->class == (u32) PCI_ANY_ID) && 64 (f->vendor == dev->vendor || 65 f->vendor == (u16) PCI_ANY_ID) && 66 (f->device == dev->device || 67 f->device == (u16) PCI_ANY_ID)) { 68 void (*hook)(struct pci_dev *dev); 69 #ifdef CONFIG_HAVE_ARCH_PREL32_RELOCATIONS 70 hook = offset_to_ptr(&f->hook_offset); 71 #else 72 hook = f->hook; 73 #endif 74 calltime = fixup_debug_start(dev, hook); 75 hook(dev); 76 fixup_debug_report(dev, calltime, hook); 77 } 78 } 79 80 extern struct pci_fixup __start_pci_fixups_early[]; 81 extern struct pci_fixup __end_pci_fixups_early[]; 82 extern struct pci_fixup __start_pci_fixups_header[]; 83 extern struct pci_fixup __end_pci_fixups_header[]; 84 extern struct pci_fixup __start_pci_fixups_final[]; 85 extern struct pci_fixup __end_pci_fixups_final[]; 86 extern struct pci_fixup __start_pci_fixups_enable[]; 87 extern struct pci_fixup __end_pci_fixups_enable[]; 88 extern struct pci_fixup __start_pci_fixups_resume[]; 89 extern struct pci_fixup __end_pci_fixups_resume[]; 90 extern struct pci_fixup __start_pci_fixups_resume_early[]; 91 extern struct pci_fixup __end_pci_fixups_resume_early[]; 92 extern struct pci_fixup __start_pci_fixups_suspend[]; 93 extern struct pci_fixup __end_pci_fixups_suspend[]; 94 extern struct pci_fixup __start_pci_fixups_suspend_late[]; 95 extern struct pci_fixup __end_pci_fixups_suspend_late[]; 96 97 static bool pci_apply_fixup_final_quirks; 98 99 void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) 100 { 101 struct pci_fixup *start, *end; 102 103 switch (pass) { 104 case pci_fixup_early: 105 start = __start_pci_fixups_early; 106 end = __end_pci_fixups_early; 107 break; 108 109 case pci_fixup_header: 110 start = __start_pci_fixups_header; 111 end = __end_pci_fixups_header; 112 break; 113 114 case pci_fixup_final: 115 if (!pci_apply_fixup_final_quirks) 116 return; 117 start = __start_pci_fixups_final; 118 end = __end_pci_fixups_final; 119 break; 120 121 case pci_fixup_enable: 122 start = __start_pci_fixups_enable; 123 end = __end_pci_fixups_enable; 124 break; 125 126 case pci_fixup_resume: 127 start = __start_pci_fixups_resume; 128 end = __end_pci_fixups_resume; 129 break; 130 131 case pci_fixup_resume_early: 132 start = __start_pci_fixups_resume_early; 133 end = __end_pci_fixups_resume_early; 134 break; 135 136 case pci_fixup_suspend: 137 start = __start_pci_fixups_suspend; 138 end = __end_pci_fixups_suspend; 139 break; 140 141 case pci_fixup_suspend_late: 142 start = __start_pci_fixups_suspend_late; 143 end = __end_pci_fixups_suspend_late; 144 break; 145 146 default: 147 /* stupid compiler warning, you would think with an enum... */ 148 return; 149 } 150 pci_do_fixups(dev, start, end); 151 } 152 EXPORT_SYMBOL(pci_fixup_device); 153 154 static int __init pci_apply_final_quirks(void) 155 { 156 struct pci_dev *dev = NULL; 157 u8 cls = 0; 158 u8 tmp; 159 160 if (pci_cache_line_size) 161 pr_info("PCI: CLS %u bytes\n", pci_cache_line_size << 2); 162 163 pci_apply_fixup_final_quirks = true; 164 for_each_pci_dev(dev) { 165 pci_fixup_device(pci_fixup_final, dev); 166 /* 167 * If arch hasn't set it explicitly yet, use the CLS 168 * value shared by all PCI devices. If there's a 169 * mismatch, fall back to the default value. 170 */ 171 if (!pci_cache_line_size) { 172 pci_read_config_byte(dev, PCI_CACHE_LINE_SIZE, &tmp); 173 if (!cls) 174 cls = tmp; 175 if (!tmp || cls == tmp) 176 continue; 177 178 pci_info(dev, "CLS mismatch (%u != %u), using %u bytes\n", 179 cls << 2, tmp << 2, 180 pci_dfl_cache_line_size << 2); 181 pci_cache_line_size = pci_dfl_cache_line_size; 182 } 183 } 184 185 if (!pci_cache_line_size) { 186 pr_info("PCI: CLS %u bytes, default %u\n", cls << 2, 187 pci_dfl_cache_line_size << 2); 188 pci_cache_line_size = cls ? cls : pci_dfl_cache_line_size; 189 } 190 191 return 0; 192 } 193 fs_initcall_sync(pci_apply_final_quirks); 194 195 /* 196 * Decoding should be disabled for a PCI device during BAR sizing to avoid 197 * conflict. But doing so may cause problems on host bridge and perhaps other 198 * key system devices. For devices that need to have mmio decoding always-on, 199 * we need to set the dev->mmio_always_on bit. 200 */ 201 static void quirk_mmio_always_on(struct pci_dev *dev) 202 { 203 dev->mmio_always_on = 1; 204 } 205 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_ANY_ID, PCI_ANY_ID, 206 PCI_CLASS_BRIDGE_HOST, 8, quirk_mmio_always_on); 207 208 /* 209 * The Mellanox Tavor device gives false positive parity errors. Mark this 210 * device with a broken_parity_status to allow PCI scanning code to "skip" 211 * this now blacklisted device. 212 */ 213 static void quirk_mellanox_tavor(struct pci_dev *dev) 214 { 215 dev->broken_parity_status = 1; /* This device gives false positives */ 216 } 217 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR, quirk_mellanox_tavor); 218 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE, quirk_mellanox_tavor); 219 220 /* 221 * Deal with broken BIOSes that neglect to enable passive release, 222 * which can cause problems in combination with the 82441FX/PPro MTRRs 223 */ 224 static void quirk_passive_release(struct pci_dev *dev) 225 { 226 struct pci_dev *d = NULL; 227 unsigned char dlc; 228 229 /* 230 * We have to make sure a particular bit is set in the PIIX3 231 * ISA bridge, so we have to go out and find it. 232 */ 233 while ((d = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, d))) { 234 pci_read_config_byte(d, 0x82, &dlc); 235 if (!(dlc & 1<<1)) { 236 pci_info(d, "PIIX3: Enabling Passive Release\n"); 237 dlc |= 1<<1; 238 pci_write_config_byte(d, 0x82, dlc); 239 } 240 } 241 } 242 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 243 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_passive_release); 244 245 /* 246 * The VIA VP2/VP3/MVP3 seem to have some 'features'. There may be a 247 * workaround but VIA don't answer queries. If you happen to have good 248 * contacts at VIA ask them for me please -- Alan 249 * 250 * This appears to be BIOS not version dependent. So presumably there is a 251 * chipset level fix. 252 */ 253 static void quirk_isa_dma_hangs(struct pci_dev *dev) 254 { 255 if (!isa_dma_bridge_buggy) { 256 isa_dma_bridge_buggy = 1; 257 pci_info(dev, "Activating ISA DMA hang workarounds\n"); 258 } 259 } 260 /* 261 * It's not totally clear which chipsets are the problematic ones. We know 262 * 82C586 and 82C596 variants are affected. 263 */ 264 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, quirk_isa_dma_hangs); 265 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596, quirk_isa_dma_hangs); 266 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_0, quirk_isa_dma_hangs); 267 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, quirk_isa_dma_hangs); 268 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_1, quirk_isa_dma_hangs); 269 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_dma_hangs); 270 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); 271 272 /* 273 * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear 274 * for some HT machines to use C4 w/o hanging. 275 */ 276 static void quirk_tigerpoint_bm_sts(struct pci_dev *dev) 277 { 278 u32 pmbase; 279 u16 pm1a; 280 281 pci_read_config_dword(dev, 0x40, &pmbase); 282 pmbase = pmbase & 0xff80; 283 pm1a = inw(pmbase); 284 285 if (pm1a & 0x10) { 286 pci_info(dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); 287 outw(0x10, pmbase); 288 } 289 } 290 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); 291 292 /* Chipsets where PCI->PCI transfers vanish or hang */ 293 static void quirk_nopcipci(struct pci_dev *dev) 294 { 295 if ((pci_pci_problems & PCIPCI_FAIL) == 0) { 296 pci_info(dev, "Disabling direct PCI/PCI transfers\n"); 297 pci_pci_problems |= PCIPCI_FAIL; 298 } 299 } 300 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci); 301 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci); 302 303 static void quirk_nopciamd(struct pci_dev *dev) 304 { 305 u8 rev; 306 pci_read_config_byte(dev, 0x08, &rev); 307 if (rev == 0x13) { 308 /* Erratum 24 */ 309 pci_info(dev, "Chipset erratum: Disabling direct PCI/AGP transfers\n"); 310 pci_pci_problems |= PCIAGP_FAIL; 311 } 312 } 313 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd); 314 315 /* Triton requires workarounds to be used by the drivers */ 316 static void quirk_triton(struct pci_dev *dev) 317 { 318 if ((pci_pci_problems&PCIPCI_TRITON) == 0) { 319 pci_info(dev, "Limiting direct PCI/PCI transfers\n"); 320 pci_pci_problems |= PCIPCI_TRITON; 321 } 322 } 323 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437, quirk_triton); 324 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82437VX, quirk_triton); 325 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439, quirk_triton); 326 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quirk_triton); 327 328 /* 329 * VIA Apollo KT133 needs PCI latency patch 330 * Made according to a Windows driver-based patch by George E. Breese; 331 * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm 332 * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for the info on 333 * which Mr Breese based his work. 334 * 335 * Updated based on further information from the site and also on 336 * information provided by VIA 337 */ 338 static void quirk_vialatency(struct pci_dev *dev) 339 { 340 struct pci_dev *p; 341 u8 busarb; 342 343 /* 344 * Ok, we have a potential problem chipset here. Now see if we have 345 * a buggy southbridge. 346 */ 347 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, NULL); 348 if (p != NULL) { 349 350 /* 351 * 0x40 - 0x4f == 686B, 0x10 - 0x2f == 686A; 352 * thanks Dan Hollis. 353 * Check for buggy part revisions 354 */ 355 if (p->revision < 0x40 || p->revision > 0x42) 356 goto exit; 357 } else { 358 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, NULL); 359 if (p == NULL) /* No problem parts */ 360 goto exit; 361 362 /* Check for buggy part revisions */ 363 if (p->revision < 0x10 || p->revision > 0x12) 364 goto exit; 365 } 366 367 /* 368 * Ok we have the problem. Now set the PCI master grant to occur 369 * every master grant. The apparent bug is that under high PCI load 370 * (quite common in Linux of course) you can get data loss when the 371 * CPU is held off the bus for 3 bus master requests. This happens 372 * to include the IDE controllers.... 373 * 374 * VIA only apply this fix when an SB Live! is present but under 375 * both Linux and Windows this isn't enough, and we have seen 376 * corruption without SB Live! but with things like 3 UDMA IDE 377 * controllers. So we ignore that bit of the VIA recommendation.. 378 */ 379 pci_read_config_byte(dev, 0x76, &busarb); 380 381 /* 382 * Set bit 4 and bit 5 of byte 76 to 0x01 383 * "Master priority rotation on every PCI master grant" 384 */ 385 busarb &= ~(1<<5); 386 busarb |= (1<<4); 387 pci_write_config_byte(dev, 0x76, busarb); 388 pci_info(dev, "Applying VIA southbridge workaround\n"); 389 exit: 390 pci_dev_put(p); 391 } 392 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 393 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 394 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 395 /* Must restore this on a resume from RAM */ 396 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, quirk_vialatency); 397 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8371_1, quirk_vialatency); 398 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, quirk_vialatency); 399 400 /* VIA Apollo VP3 needs ETBF on BT848/878 */ 401 static void quirk_viaetbf(struct pci_dev *dev) 402 { 403 if ((pci_pci_problems&PCIPCI_VIAETBF) == 0) { 404 pci_info(dev, "Limiting direct PCI/PCI transfers\n"); 405 pci_pci_problems |= PCIPCI_VIAETBF; 406 } 407 } 408 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_viaetbf); 409 410 static void quirk_vsfx(struct pci_dev *dev) 411 { 412 if ((pci_pci_problems&PCIPCI_VSFX) == 0) { 413 pci_info(dev, "Limiting direct PCI/PCI transfers\n"); 414 pci_pci_problems |= PCIPCI_VSFX; 415 } 416 } 417 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576, quirk_vsfx); 418 419 /* 420 * ALi Magik requires workarounds to be used by the drivers that DMA to AGP 421 * space. Latency must be set to 0xA and Triton workaround applied too. 422 * [Info kindly provided by ALi] 423 */ 424 static void quirk_alimagik(struct pci_dev *dev) 425 { 426 if ((pci_pci_problems&PCIPCI_ALIMAGIK) == 0) { 427 pci_info(dev, "Limiting direct PCI/PCI transfers\n"); 428 pci_pci_problems |= PCIPCI_ALIMAGIK|PCIPCI_TRITON; 429 } 430 } 431 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1647, quirk_alimagik); 432 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1651, quirk_alimagik); 433 434 /* Natoma has some interesting boundary conditions with Zoran stuff at least */ 435 static void quirk_natoma(struct pci_dev *dev) 436 { 437 if ((pci_pci_problems&PCIPCI_NATOMA) == 0) { 438 pci_info(dev, "Limiting direct PCI/PCI transfers\n"); 439 pci_pci_problems |= PCIPCI_NATOMA; 440 } 441 } 442 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, quirk_natoma); 443 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_0, quirk_natoma); 444 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443LX_1, quirk_natoma); 445 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0, quirk_natoma); 446 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_1, quirk_natoma); 447 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2, quirk_natoma); 448 449 /* 450 * This chip can cause PCI parity errors if config register 0xA0 is read 451 * while DMAs are occurring. 452 */ 453 static void quirk_citrine(struct pci_dev *dev) 454 { 455 dev->cfg_size = 0xA0; 456 } 457 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, quirk_citrine); 458 459 /* 460 * This chip can cause bus lockups if config addresses above 0x600 461 * are read or written. 462 */ 463 static void quirk_nfp6000(struct pci_dev *dev) 464 { 465 dev->cfg_size = 0x600; 466 } 467 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP4000, quirk_nfp6000); 468 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000, quirk_nfp6000); 469 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP5000, quirk_nfp6000); 470 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NETRONOME, PCI_DEVICE_ID_NETRONOME_NFP6000_VF, quirk_nfp6000); 471 472 /* On IBM Crocodile ipr SAS adapters, expand BAR to system page size */ 473 static void quirk_extend_bar_to_page(struct pci_dev *dev) 474 { 475 int i; 476 477 for (i = 0; i < PCI_STD_NUM_BARS; i++) { 478 struct resource *r = &dev->resource[i]; 479 480 if (r->flags & IORESOURCE_MEM && resource_size(r) < PAGE_SIZE) { 481 r->end = PAGE_SIZE - 1; 482 r->start = 0; 483 r->flags |= IORESOURCE_UNSET; 484 pci_info(dev, "expanded BAR %d to page size: %pR\n", 485 i, r); 486 } 487 } 488 } 489 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, 0x034a, quirk_extend_bar_to_page); 490 491 /* 492 * S3 868 and 968 chips report region size equal to 32M, but they decode 64M. 493 * If it's needed, re-allocate the region. 494 */ 495 static void quirk_s3_64M(struct pci_dev *dev) 496 { 497 struct resource *r = &dev->resource[0]; 498 499 if ((r->start & 0x3ffffff) || r->end != r->start + 0x3ffffff) { 500 r->flags |= IORESOURCE_UNSET; 501 r->start = 0; 502 r->end = 0x3ffffff; 503 } 504 } 505 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M); 506 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M); 507 508 static void quirk_io(struct pci_dev *dev, int pos, unsigned size, 509 const char *name) 510 { 511 u32 region; 512 struct pci_bus_region bus_region; 513 struct resource *res = dev->resource + pos; 514 515 pci_read_config_dword(dev, PCI_BASE_ADDRESS_0 + (pos << 2), ®ion); 516 517 if (!region) 518 return; 519 520 res->name = pci_name(dev); 521 res->flags = region & ~PCI_BASE_ADDRESS_IO_MASK; 522 res->flags |= 523 (IORESOURCE_IO | IORESOURCE_PCI_FIXED | IORESOURCE_SIZEALIGN); 524 region &= ~(size - 1); 525 526 /* Convert from PCI bus to resource space */ 527 bus_region.start = region; 528 bus_region.end = region + size - 1; 529 pcibios_bus_to_resource(dev->bus, res, &bus_region); 530 531 pci_info(dev, FW_BUG "%s quirk: reg 0x%x: %pR\n", 532 name, PCI_BASE_ADDRESS_0 + (pos << 2), res); 533 } 534 535 /* 536 * Some CS5536 BIOSes (for example, the Soekris NET5501 board w/ comBIOS 537 * ver. 1.33 20070103) don't set the correct ISA PCI region header info. 538 * BAR0 should be 8 bytes; instead, it may be set to something like 8k 539 * (which conflicts w/ BAR1's memory range). 540 * 541 * CS553x's ISA PCI BARs may also be read-only (ref: 542 * https://bugzilla.kernel.org/show_bug.cgi?id=85991 - Comment #4 forward). 543 */ 544 static void quirk_cs5536_vsa(struct pci_dev *dev) 545 { 546 static char *name = "CS5536 ISA bridge"; 547 548 if (pci_resource_len(dev, 0) != 8) { 549 quirk_io(dev, 0, 8, name); /* SMB */ 550 quirk_io(dev, 1, 256, name); /* GPIO */ 551 quirk_io(dev, 2, 64, name); /* MFGPT */ 552 pci_info(dev, "%s bug detected (incorrect header); workaround applied\n", 553 name); 554 } 555 } 556 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, quirk_cs5536_vsa); 557 558 static void quirk_io_region(struct pci_dev *dev, int port, 559 unsigned size, int nr, const char *name) 560 { 561 u16 region; 562 struct pci_bus_region bus_region; 563 struct resource *res = dev->resource + nr; 564 565 pci_read_config_word(dev, port, ®ion); 566 region &= ~(size - 1); 567 568 if (!region) 569 return; 570 571 res->name = pci_name(dev); 572 res->flags = IORESOURCE_IO; 573 574 /* Convert from PCI bus to resource space */ 575 bus_region.start = region; 576 bus_region.end = region + size - 1; 577 pcibios_bus_to_resource(dev->bus, res, &bus_region); 578 579 if (!pci_claim_resource(dev, nr)) 580 pci_info(dev, "quirk: %pR claimed by %s\n", res, name); 581 } 582 583 /* 584 * ATI Northbridge setups MCE the processor if you even read somewhere 585 * between 0x3b0->0x3bb or read 0x3d3 586 */ 587 static void quirk_ati_exploding_mce(struct pci_dev *dev) 588 { 589 pci_info(dev, "ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb\n"); 590 /* Mae rhaid i ni beidio ag edrych ar y lleoliadiau I/O hyn */ 591 request_region(0x3b0, 0x0C, "RadeonIGP"); 592 request_region(0x3d3, 0x01, "RadeonIGP"); 593 } 594 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100, quirk_ati_exploding_mce); 595 596 /* 597 * In the AMD NL platform, this device ([1022:7912]) has a class code of 598 * PCI_CLASS_SERIAL_USB_XHCI (0x0c0330), which means the xhci driver will 599 * claim it. 600 * 601 * But the dwc3 driver is a more specific driver for this device, and we'd 602 * prefer to use it instead of xhci. To prevent xhci from claiming the 603 * device, change the class code to 0x0c03fe, which the PCI r3.0 spec 604 * defines as "USB device (not host controller)". The dwc3 driver can then 605 * claim it based on its Vendor and Device ID. 606 */ 607 static void quirk_amd_nl_class(struct pci_dev *pdev) 608 { 609 u32 class = pdev->class; 610 611 /* Use "USB Device (not host controller)" class */ 612 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; 613 pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", 614 class, pdev->class); 615 } 616 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB, 617 quirk_amd_nl_class); 618 619 /* 620 * Synopsys USB 3.x host HAPS platform has a class code of 621 * PCI_CLASS_SERIAL_USB_XHCI, and xhci driver can claim it. However, these 622 * devices should use dwc3-haps driver. Change these devices' class code to 623 * PCI_CLASS_SERIAL_USB_DEVICE to prevent the xhci-pci driver from claiming 624 * them. 625 */ 626 static void quirk_synopsys_haps(struct pci_dev *pdev) 627 { 628 u32 class = pdev->class; 629 630 switch (pdev->device) { 631 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3: 632 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI: 633 case PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31: 634 pdev->class = PCI_CLASS_SERIAL_USB_DEVICE; 635 pci_info(pdev, "PCI class overridden (%#08x -> %#08x) so dwc3 driver can claim this instead of xhci\n", 636 class, pdev->class); 637 break; 638 } 639 } 640 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, PCI_ANY_ID, 641 PCI_CLASS_SERIAL_USB_XHCI, 0, 642 quirk_synopsys_haps); 643 644 /* 645 * Let's make the southbridge information explicit instead of having to 646 * worry about people probing the ACPI areas, for example.. (Yes, it 647 * happens, and if you read the wrong ACPI register it will put the machine 648 * to sleep with no way of waking it up again. Bummer). 649 * 650 * ALI M7101: Two IO regions pointed to by words at 651 * 0xE0 (64 bytes of ACPI registers) 652 * 0xE2 (32 bytes of SMB registers) 653 */ 654 static void quirk_ali7101_acpi(struct pci_dev *dev) 655 { 656 quirk_io_region(dev, 0xE0, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); 657 quirk_io_region(dev, 0xE2, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); 658 } 659 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi); 660 661 static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 662 { 663 u32 devres; 664 u32 mask, size, base; 665 666 pci_read_config_dword(dev, port, &devres); 667 if ((devres & enable) != enable) 668 return; 669 mask = (devres >> 16) & 15; 670 base = devres & 0xffff; 671 size = 16; 672 for (;;) { 673 unsigned bit = size >> 1; 674 if ((bit & mask) == bit) 675 break; 676 size = bit; 677 } 678 /* 679 * For now we only print it out. Eventually we'll want to 680 * reserve it (at least if it's in the 0x1000+ range), but 681 * let's get enough confirmation reports first. 682 */ 683 base &= -size; 684 pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base + size - 1); 685 } 686 687 static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) 688 { 689 u32 devres; 690 u32 mask, size, base; 691 692 pci_read_config_dword(dev, port, &devres); 693 if ((devres & enable) != enable) 694 return; 695 base = devres & 0xffff0000; 696 mask = (devres & 0x3f) << 16; 697 size = 128 << 16; 698 for (;;) { 699 unsigned bit = size >> 1; 700 if ((bit & mask) == bit) 701 break; 702 size = bit; 703 } 704 705 /* 706 * For now we only print it out. Eventually we'll want to 707 * reserve it, but let's get enough confirmation reports first. 708 */ 709 base &= -size; 710 pci_info(dev, "%s MMIO at %04x-%04x\n", name, base, base + size - 1); 711 } 712 713 /* 714 * PIIX4 ACPI: Two IO regions pointed to by longwords at 715 * 0x40 (64 bytes of ACPI registers) 716 * 0x90 (16 bytes of SMB registers) 717 * and a few strange programmable PIIX4 device resources. 718 */ 719 static void quirk_piix4_acpi(struct pci_dev *dev) 720 { 721 u32 res_a; 722 723 quirk_io_region(dev, 0x40, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); 724 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); 725 726 /* Device resource A has enables for some of the other ones */ 727 pci_read_config_dword(dev, 0x5c, &res_a); 728 729 piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); 730 piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); 731 732 /* Device resource D is just bitfields for static resources */ 733 734 /* Device 12 enabled? */ 735 if (res_a & (1 << 29)) { 736 piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); 737 piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); 738 } 739 /* Device 13 enabled? */ 740 if (res_a & (1 << 30)) { 741 piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); 742 piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); 743 } 744 piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); 745 piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); 746 } 747 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi); 748 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3, quirk_piix4_acpi); 749 750 #define ICH_PMBASE 0x40 751 #define ICH_ACPI_CNTL 0x44 752 #define ICH4_ACPI_EN 0x10 753 #define ICH6_ACPI_EN 0x80 754 #define ICH4_GPIOBASE 0x58 755 #define ICH4_GPIO_CNTL 0x5c 756 #define ICH4_GPIO_EN 0x10 757 #define ICH6_GPIOBASE 0x48 758 #define ICH6_GPIO_CNTL 0x4c 759 #define ICH6_GPIO_EN 0x10 760 761 /* 762 * ICH4, ICH4-M, ICH5, ICH5-M ACPI: Three IO regions pointed to by longwords at 763 * 0x40 (128 bytes of ACPI, GPIO & TCO registers) 764 * 0x58 (64 bytes of GPIO I/O space) 765 */ 766 static void quirk_ich4_lpc_acpi(struct pci_dev *dev) 767 { 768 u8 enable; 769 770 /* 771 * The check for PCIBIOS_MIN_IO is to ensure we won't create a conflict 772 * with low legacy (and fixed) ports. We don't know the decoding 773 * priority and can't tell whether the legacy device or the one created 774 * here is really at that address. This happens on boards with broken 775 * BIOSes. 776 */ 777 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 778 if (enable & ICH4_ACPI_EN) 779 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 780 "ICH4 ACPI/GPIO/TCO"); 781 782 pci_read_config_byte(dev, ICH4_GPIO_CNTL, &enable); 783 if (enable & ICH4_GPIO_EN) 784 quirk_io_region(dev, ICH4_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 785 "ICH4 GPIO"); 786 } 787 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi); 788 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi); 789 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, quirk_ich4_lpc_acpi); 790 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, quirk_ich4_lpc_acpi); 791 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, quirk_ich4_lpc_acpi); 792 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, quirk_ich4_lpc_acpi); 793 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, quirk_ich4_lpc_acpi); 794 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, quirk_ich4_lpc_acpi); 795 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, quirk_ich4_lpc_acpi); 796 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, quirk_ich4_lpc_acpi); 797 798 static void ich6_lpc_acpi_gpio(struct pci_dev *dev) 799 { 800 u8 enable; 801 802 pci_read_config_byte(dev, ICH_ACPI_CNTL, &enable); 803 if (enable & ICH6_ACPI_EN) 804 quirk_io_region(dev, ICH_PMBASE, 128, PCI_BRIDGE_RESOURCES, 805 "ICH6 ACPI/GPIO/TCO"); 806 807 pci_read_config_byte(dev, ICH6_GPIO_CNTL, &enable); 808 if (enable & ICH6_GPIO_EN) 809 quirk_io_region(dev, ICH6_GPIOBASE, 64, PCI_BRIDGE_RESOURCES+1, 810 "ICH6 GPIO"); 811 } 812 813 static void ich6_lpc_generic_decode(struct pci_dev *dev, unsigned reg, 814 const char *name, int dynsize) 815 { 816 u32 val; 817 u32 size, base; 818 819 pci_read_config_dword(dev, reg, &val); 820 821 /* Enabled? */ 822 if (!(val & 1)) 823 return; 824 base = val & 0xfffc; 825 if (dynsize) { 826 /* 827 * This is not correct. It is 16, 32 or 64 bytes depending on 828 * register D31:F0:ADh bits 5:4. 829 * 830 * But this gets us at least _part_ of it. 831 */ 832 size = 16; 833 } else { 834 size = 128; 835 } 836 base &= ~(size-1); 837 838 /* 839 * Just print it out for now. We should reserve it after more 840 * debugging. 841 */ 842 pci_info(dev, "%s PIO at %04x-%04x\n", name, base, base+size-1); 843 } 844 845 static void quirk_ich6_lpc(struct pci_dev *dev) 846 { 847 /* Shared ACPI/GPIO decode with all ICH6+ */ 848 ich6_lpc_acpi_gpio(dev); 849 850 /* ICH6-specific generic IO decode */ 851 ich6_lpc_generic_decode(dev, 0x84, "LPC Generic IO decode 1", 0); 852 ich6_lpc_generic_decode(dev, 0x88, "LPC Generic IO decode 2", 1); 853 } 854 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0, quirk_ich6_lpc); 855 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, quirk_ich6_lpc); 856 857 static void ich7_lpc_generic_decode(struct pci_dev *dev, unsigned reg, 858 const char *name) 859 { 860 u32 val; 861 u32 mask, base; 862 863 pci_read_config_dword(dev, reg, &val); 864 865 /* Enabled? */ 866 if (!(val & 1)) 867 return; 868 869 /* IO base in bits 15:2, mask in bits 23:18, both are dword-based */ 870 base = val & 0xfffc; 871 mask = (val >> 16) & 0xfc; 872 mask |= 3; 873 874 /* 875 * Just print it out for now. We should reserve it after more 876 * debugging. 877 */ 878 pci_info(dev, "%s PIO at %04x (mask %04x)\n", name, base, mask); 879 } 880 881 /* ICH7-10 has the same common LPC generic IO decode registers */ 882 static void quirk_ich7_lpc(struct pci_dev *dev) 883 { 884 /* We share the common ACPI/GPIO decode with ICH6 */ 885 ich6_lpc_acpi_gpio(dev); 886 887 /* And have 4 ICH7+ generic decodes */ 888 ich7_lpc_generic_decode(dev, 0x84, "ICH7 LPC Generic IO decode 1"); 889 ich7_lpc_generic_decode(dev, 0x88, "ICH7 LPC Generic IO decode 2"); 890 ich7_lpc_generic_decode(dev, 0x8c, "ICH7 LPC Generic IO decode 3"); 891 ich7_lpc_generic_decode(dev, 0x90, "ICH7 LPC Generic IO decode 4"); 892 } 893 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, quirk_ich7_lpc); 894 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, quirk_ich7_lpc); 895 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, quirk_ich7_lpc); 896 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, quirk_ich7_lpc); 897 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, quirk_ich7_lpc); 898 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, quirk_ich7_lpc); 899 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1, quirk_ich7_lpc); 900 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4, quirk_ich7_lpc); 901 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2, quirk_ich7_lpc); 902 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4, quirk_ich7_lpc); 903 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7, quirk_ich7_lpc); 904 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8, quirk_ich7_lpc); 905 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1, quirk_ich7_lpc); 906 907 /* 908 * VIA ACPI: One IO region pointed to by longword at 909 * 0x48 or 0x20 (256 bytes of ACPI registers) 910 */ 911 static void quirk_vt82c586_acpi(struct pci_dev *dev) 912 { 913 if (dev->revision & 0x10) 914 quirk_io_region(dev, 0x48, 256, PCI_BRIDGE_RESOURCES, 915 "vt82c586 ACPI"); 916 } 917 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi); 918 919 /* 920 * VIA VT82C686 ACPI: Three IO region pointed to by (long)words at 921 * 0x48 (256 bytes of ACPI registers) 922 * 0x70 (128 bytes of hardware monitoring register) 923 * 0x90 (16 bytes of SMB registers) 924 */ 925 static void quirk_vt82c686_acpi(struct pci_dev *dev) 926 { 927 quirk_vt82c586_acpi(dev); 928 929 quirk_io_region(dev, 0x70, 128, PCI_BRIDGE_RESOURCES+1, 930 "vt82c686 HW-mon"); 931 932 quirk_io_region(dev, 0x90, 16, PCI_BRIDGE_RESOURCES+2, "vt82c686 SMB"); 933 } 934 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi); 935 936 /* 937 * VIA VT8235 ISA Bridge: Two IO regions pointed to by words at 938 * 0x88 (128 bytes of power management registers) 939 * 0xd0 (16 bytes of SMB registers) 940 */ 941 static void quirk_vt8235_acpi(struct pci_dev *dev) 942 { 943 quirk_io_region(dev, 0x88, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); 944 quirk_io_region(dev, 0xd0, 16, PCI_BRIDGE_RESOURCES+1, "vt8235 SMB"); 945 } 946 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); 947 948 /* 949 * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast 950 * back-to-back: Disable fast back-to-back on the secondary bus segment 951 */ 952 static void quirk_xio2000a(struct pci_dev *dev) 953 { 954 struct pci_dev *pdev; 955 u16 command; 956 957 pci_warn(dev, "TI XIO2000a quirk detected; secondary bus fast back-to-back transfers disabled\n"); 958 list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) { 959 pci_read_config_word(pdev, PCI_COMMAND, &command); 960 if (command & PCI_COMMAND_FAST_BACK) 961 pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK); 962 } 963 } 964 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A, 965 quirk_xio2000a); 966 967 #ifdef CONFIG_X86_IO_APIC 968 969 #include <asm/io_apic.h> 970 971 /* 972 * VIA 686A/B: If an IO-APIC is active, we need to route all on-chip 973 * devices to the external APIC. 974 * 975 * TODO: When we have device-specific interrupt routers, this code will go 976 * away from quirks. 977 */ 978 static void quirk_via_ioapic(struct pci_dev *dev) 979 { 980 u8 tmp; 981 982 if (nr_ioapics < 1) 983 tmp = 0; /* nothing routed to external APIC */ 984 else 985 tmp = 0x1f; /* all known bits (4-0) routed to external APIC */ 986 987 pci_info(dev, "%sbling VIA external APIC routing\n", 988 tmp == 0 ? "Disa" : "Ena"); 989 990 /* Offset 0x58: External APIC IRQ output control */ 991 pci_write_config_byte(dev, 0x58, tmp); 992 } 993 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 994 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_ioapic); 995 996 /* 997 * VIA 8237: Some BIOSes don't set the 'Bypass APIC De-Assert Message' Bit. 998 * This leads to doubled level interrupt rates. 999 * Set this bit to get rid of cycle wastage. 1000 * Otherwise uncritical. 1001 */ 1002 static void quirk_via_vt8237_bypass_apic_deassert(struct pci_dev *dev) 1003 { 1004 u8 misc_control2; 1005 #define BYPASS_APIC_DEASSERT 8 1006 1007 pci_read_config_byte(dev, 0x5B, &misc_control2); 1008 if (!(misc_control2 & BYPASS_APIC_DEASSERT)) { 1009 pci_info(dev, "Bypassing VIA 8237 APIC De-Assert Message\n"); 1010 pci_write_config_byte(dev, 0x5B, misc_control2|BYPASS_APIC_DEASSERT); 1011 } 1012 } 1013 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 1014 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_vt8237_bypass_apic_deassert); 1015 1016 /* 1017 * The AMD IO-APIC can hang the box when an APIC IRQ is masked. 1018 * We check all revs >= B0 (yet not in the pre production!) as the bug 1019 * is currently marked NoFix 1020 * 1021 * We have multiple reports of hangs with this chipset that went away with 1022 * noapic specified. For the moment we assume it's the erratum. We may be wrong 1023 * of course. However the advice is demonstrably good even if so. 1024 */ 1025 static void quirk_amd_ioapic(struct pci_dev *dev) 1026 { 1027 if (dev->revision >= 0x02) { 1028 pci_warn(dev, "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n"); 1029 pci_warn(dev, " : booting with the \"noapic\" option\n"); 1030 } 1031 } 1032 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, quirk_amd_ioapic); 1033 #endif /* CONFIG_X86_IO_APIC */ 1034 1035 #if defined(CONFIG_ARM64) && defined(CONFIG_PCI_ATS) 1036 1037 static void quirk_cavium_sriov_rnm_link(struct pci_dev *dev) 1038 { 1039 /* Fix for improper SR-IOV configuration on Cavium cn88xx RNM device */ 1040 if (dev->subsystem_device == 0xa118) 1041 dev->sriov->link = dev->devfn; 1042 } 1043 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CAVIUM, 0xa018, quirk_cavium_sriov_rnm_link); 1044 #endif 1045 1046 /* 1047 * Some settings of MMRBC can lead to data corruption so block changes. 1048 * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide 1049 */ 1050 static void quirk_amd_8131_mmrbc(struct pci_dev *dev) 1051 { 1052 if (dev->subordinate && dev->revision <= 0x12) { 1053 pci_info(dev, "AMD8131 rev %x detected; disabling PCI-X MMRBC\n", 1054 dev->revision); 1055 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC; 1056 } 1057 } 1058 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc); 1059 1060 /* 1061 * FIXME: it is questionable that quirk_via_acpi() is needed. It shows up 1062 * as an ISA bridge, and does not support the PCI_INTERRUPT_LINE register 1063 * at all. Therefore it seems like setting the pci_dev's IRQ to the value 1064 * of the ACPI SCI interrupt is only done for convenience. 1065 * -jgarzik 1066 */ 1067 static void quirk_via_acpi(struct pci_dev *d) 1068 { 1069 u8 irq; 1070 1071 /* VIA ACPI device: SCI IRQ line in PCI config byte 0x42 */ 1072 pci_read_config_byte(d, 0x42, &irq); 1073 irq &= 0xf; 1074 if (irq && (irq != 2)) 1075 d->irq = irq; 1076 } 1077 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_via_acpi); 1078 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_via_acpi); 1079 1080 /* VIA bridges which have VLink */ 1081 static int via_vlink_dev_lo = -1, via_vlink_dev_hi = 18; 1082 1083 static void quirk_via_bridge(struct pci_dev *dev) 1084 { 1085 /* See what bridge we have and find the device ranges */ 1086 switch (dev->device) { 1087 case PCI_DEVICE_ID_VIA_82C686: 1088 /* 1089 * The VT82C686 is special; it attaches to PCI and can have 1090 * any device number. All its subdevices are functions of 1091 * that single device. 1092 */ 1093 via_vlink_dev_lo = PCI_SLOT(dev->devfn); 1094 via_vlink_dev_hi = PCI_SLOT(dev->devfn); 1095 break; 1096 case PCI_DEVICE_ID_VIA_8237: 1097 case PCI_DEVICE_ID_VIA_8237A: 1098 via_vlink_dev_lo = 15; 1099 break; 1100 case PCI_DEVICE_ID_VIA_8235: 1101 via_vlink_dev_lo = 16; 1102 break; 1103 case PCI_DEVICE_ID_VIA_8231: 1104 case PCI_DEVICE_ID_VIA_8233_0: 1105 case PCI_DEVICE_ID_VIA_8233A: 1106 case PCI_DEVICE_ID_VIA_8233C_0: 1107 via_vlink_dev_lo = 17; 1108 break; 1109 } 1110 } 1111 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, quirk_via_bridge); 1112 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231, quirk_via_bridge); 1113 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0, quirk_via_bridge); 1114 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A, quirk_via_bridge); 1115 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233C_0, quirk_via_bridge); 1116 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_via_bridge); 1117 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, quirk_via_bridge); 1118 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237A, quirk_via_bridge); 1119 1120 /* 1121 * quirk_via_vlink - VIA VLink IRQ number update 1122 * @dev: PCI device 1123 * 1124 * If the device we are dealing with is on a PIC IRQ we need to ensure that 1125 * the IRQ line register which usually is not relevant for PCI cards, is 1126 * actually written so that interrupts get sent to the right place. 1127 * 1128 * We only do this on systems where a VIA south bridge was detected, and 1129 * only for VIA devices on the motherboard (see quirk_via_bridge above). 1130 */ 1131 static void quirk_via_vlink(struct pci_dev *dev) 1132 { 1133 u8 irq, new_irq; 1134 1135 /* Check if we have VLink at all */ 1136 if (via_vlink_dev_lo == -1) 1137 return; 1138 1139 new_irq = dev->irq; 1140 1141 /* Don't quirk interrupts outside the legacy IRQ range */ 1142 if (!new_irq || new_irq > 15) 1143 return; 1144 1145 /* Internal device ? */ 1146 if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) > via_vlink_dev_hi || 1147 PCI_SLOT(dev->devfn) < via_vlink_dev_lo) 1148 return; 1149 1150 /* 1151 * This is an internal VLink device on a PIC interrupt. The BIOS 1152 * ought to have set this but may not have, so we redo it. 1153 */ 1154 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 1155 if (new_irq != irq) { 1156 pci_info(dev, "VIA VLink IRQ fixup, from %d to %d\n", 1157 irq, new_irq); 1158 udelay(15); /* unknown if delay really needed */ 1159 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq); 1160 } 1161 } 1162 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_vlink); 1163 1164 /* 1165 * VIA VT82C598 has its device ID settable and many BIOSes set it to the ID 1166 * of VT82C597 for backward compatibility. We need to switch it off to be 1167 * able to recognize the real type of the chip. 1168 */ 1169 static void quirk_vt82c598_id(struct pci_dev *dev) 1170 { 1171 pci_write_config_byte(dev, 0xfc, 0); 1172 pci_read_config_word(dev, PCI_DEVICE_ID, &dev->device); 1173 } 1174 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C597_0, quirk_vt82c598_id); 1175 1176 /* 1177 * CardBus controllers have a legacy base address that enables them to 1178 * respond as i82365 pcmcia controllers. We don't want them to do this 1179 * even if the Linux CardBus driver is not loaded, because the Linux i82365 1180 * driver does not (and should not) handle CardBus. 1181 */ 1182 static void quirk_cardbus_legacy(struct pci_dev *dev) 1183 { 1184 pci_write_config_dword(dev, PCI_CB_LEGACY_MODE_BASE, 0); 1185 } 1186 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 1187 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 1188 DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_ANY_ID, PCI_ANY_ID, 1189 PCI_CLASS_BRIDGE_CARDBUS, 8, quirk_cardbus_legacy); 1190 1191 /* 1192 * Following the PCI ordering rules is optional on the AMD762. I'm not sure 1193 * what the designers were smoking but let's not inhale... 1194 * 1195 * To be fair to AMD, it follows the spec by default, it's BIOS people who 1196 * turn it off! 1197 */ 1198 static void quirk_amd_ordering(struct pci_dev *dev) 1199 { 1200 u32 pcic; 1201 pci_read_config_dword(dev, 0x4C, &pcic); 1202 if ((pcic & 6) != 6) { 1203 pcic |= 6; 1204 pci_warn(dev, "BIOS failed to enable PCI standards compliance; fixing this error\n"); 1205 pci_write_config_dword(dev, 0x4C, pcic); 1206 pci_read_config_dword(dev, 0x84, &pcic); 1207 pcic |= (1 << 23); /* Required in this mode */ 1208 pci_write_config_dword(dev, 0x84, pcic); 1209 } 1210 } 1211 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1212 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_FE_GATE_700C, quirk_amd_ordering); 1213 1214 /* 1215 * DreamWorks-provided workaround for Dunord I-3000 problem 1216 * 1217 * This card decodes and responds to addresses not apparently assigned to 1218 * it. We force a larger allocation to ensure that nothing gets put too 1219 * close to it. 1220 */ 1221 static void quirk_dunord(struct pci_dev *dev) 1222 { 1223 struct resource *r = &dev->resource[1]; 1224 1225 r->flags |= IORESOURCE_UNSET; 1226 r->start = 0; 1227 r->end = 0xffffff; 1228 } 1229 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DUNORD, PCI_DEVICE_ID_DUNORD_I3000, quirk_dunord); 1230 1231 /* 1232 * i82380FB mobile docking controller: its PCI-to-PCI bridge is subtractive 1233 * decoding (transparent), and does indicate this in the ProgIf. 1234 * Unfortunately, the ProgIf value is wrong - 0x80 instead of 0x01. 1235 */ 1236 static void quirk_transparent_bridge(struct pci_dev *dev) 1237 { 1238 dev->transparent = 1; 1239 } 1240 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82380FB, quirk_transparent_bridge); 1241 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge); 1242 1243 /* 1244 * Common misconfiguration of the MediaGX/Geode PCI master that will reduce 1245 * PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 datasheets 1246 * found at http://www.national.com/analog for info on what these bits do. 1247 * <christer@weinigel.se> 1248 */ 1249 static void quirk_mediagx_master(struct pci_dev *dev) 1250 { 1251 u8 reg; 1252 1253 pci_read_config_byte(dev, 0x41, ®); 1254 if (reg & 2) { 1255 reg &= ~2; 1256 pci_info(dev, "Fixup for MediaGX/Geode Slave Disconnect Boundary (0x41=0x%02x)\n", 1257 reg); 1258 pci_write_config_byte(dev, 0x41, reg); 1259 } 1260 } 1261 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1262 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_PCI_MASTER, quirk_mediagx_master); 1263 1264 /* 1265 * Ensure C0 rev restreaming is off. This is normally done by the BIOS but 1266 * in the odd case it is not the results are corruption hence the presence 1267 * of a Linux check. 1268 */ 1269 static void quirk_disable_pxb(struct pci_dev *pdev) 1270 { 1271 u16 config; 1272 1273 if (pdev->revision != 0x04) /* Only C0 requires this */ 1274 return; 1275 pci_read_config_word(pdev, 0x40, &config); 1276 if (config & (1<<6)) { 1277 config &= ~(1<<6); 1278 pci_write_config_word(pdev, 0x40, config); 1279 pci_info(pdev, "C0 revision 450NX. Disabling PCI restreaming\n"); 1280 } 1281 } 1282 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1283 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, quirk_disable_pxb); 1284 1285 static void quirk_amd_ide_mode(struct pci_dev *pdev) 1286 { 1287 /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */ 1288 u8 tmp; 1289 1290 pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp); 1291 if (tmp == 0x01) { 1292 pci_read_config_byte(pdev, 0x40, &tmp); 1293 pci_write_config_byte(pdev, 0x40, tmp|1); 1294 pci_write_config_byte(pdev, 0x9, 1); 1295 pci_write_config_byte(pdev, 0xa, 6); 1296 pci_write_config_byte(pdev, 0x40, tmp); 1297 1298 pdev->class = PCI_CLASS_STORAGE_SATA_AHCI; 1299 pci_info(pdev, "set SATA to AHCI mode\n"); 1300 } 1301 } 1302 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1303 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode); 1304 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1305 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode); 1306 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1307 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode); 1308 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1309 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, 0x7900, quirk_amd_ide_mode); 1310 1311 /* Serverworks CSB5 IDE does not fully support native mode */ 1312 static void quirk_svwks_csb5ide(struct pci_dev *pdev) 1313 { 1314 u8 prog; 1315 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1316 if (prog & 5) { 1317 prog &= ~5; 1318 pdev->class &= ~5; 1319 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1320 /* PCI layer will sort out resources */ 1321 } 1322 } 1323 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, quirk_svwks_csb5ide); 1324 1325 /* Intel 82801CAM ICH3-M datasheet says IDE modes must be the same */ 1326 static void quirk_ide_samemode(struct pci_dev *pdev) 1327 { 1328 u8 prog; 1329 1330 pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); 1331 1332 if (((prog & 1) && !(prog & 4)) || ((prog & 4) && !(prog & 1))) { 1333 pci_info(pdev, "IDE mode mismatch; forcing legacy mode\n"); 1334 prog &= ~5; 1335 pdev->class &= ~5; 1336 pci_write_config_byte(pdev, PCI_CLASS_PROG, prog); 1337 } 1338 } 1339 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_10, quirk_ide_samemode); 1340 1341 /* Some ATA devices break if put into D3 */ 1342 static void quirk_no_ata_d3(struct pci_dev *pdev) 1343 { 1344 pdev->dev_flags |= PCI_DEV_FLAGS_NO_D3; 1345 } 1346 /* Quirk the legacy ATA devices only. The AHCI ones are ok */ 1347 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_SERVERWORKS, PCI_ANY_ID, 1348 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1349 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 1350 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1351 /* ALi loses some register settings that we cannot then restore */ 1352 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, 1353 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1354 /* VIA comes back fine but we need to keep it alive or ACPI GTM failures 1355 occur when mode detecting */ 1356 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_VIA, PCI_ANY_ID, 1357 PCI_CLASS_STORAGE_IDE, 8, quirk_no_ata_d3); 1358 1359 /* 1360 * This was originally an Alpha-specific thing, but it really fits here. 1361 * The i82375 PCI/EISA bridge appears as non-classified. Fix that. 1362 */ 1363 static void quirk_eisa_bridge(struct pci_dev *dev) 1364 { 1365 dev->class = PCI_CLASS_BRIDGE_EISA << 8; 1366 } 1367 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82375, quirk_eisa_bridge); 1368 1369 /* 1370 * On ASUS P4B boards, the SMBus PCI Device within the ICH2/4 southbridge 1371 * is not activated. The myth is that Asus said that they do not want the 1372 * users to be irritated by just another PCI Device in the Win98 device 1373 * manager. (see the file prog/hotplug/README.p4b in the lm_sensors 1374 * package 2.7.0 for details) 1375 * 1376 * The SMBus PCI Device can be activated by setting a bit in the ICH LPC 1377 * bridge. Unfortunately, this device has no subvendor/subdevice ID. So it 1378 * becomes necessary to do this tweak in two steps -- the chosen trigger 1379 * is either the Host bridge (preferred) or on-board VGA controller. 1380 * 1381 * Note that we used to unhide the SMBus that way on Toshiba laptops 1382 * (Satellite A40 and Tecra M2) but then found that the thermal management 1383 * was done by SMM code, which could cause unsynchronized concurrent 1384 * accesses to the SMBus registers, with potentially bad effects. Thus you 1385 * should be very careful when adding new entries: if SMM is accessing the 1386 * Intel SMBus, this is a very good reason to leave it hidden. 1387 * 1388 * Likewise, many recent laptops use ACPI for thermal management. If the 1389 * ACPI DSDT code accesses the SMBus, then Linux should not access it 1390 * natively, and keeping the SMBus hidden is the right thing to do. If you 1391 * are about to add an entry in the table below, please first disassemble 1392 * the DSDT and double-check that there is no code accessing the SMBus. 1393 */ 1394 static int asus_hides_smbus; 1395 1396 static void asus_hides_smbus_hostbridge(struct pci_dev *dev) 1397 { 1398 if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1399 if (dev->device == PCI_DEVICE_ID_INTEL_82845_HB) 1400 switch (dev->subsystem_device) { 1401 case 0x8025: /* P4B-LX */ 1402 case 0x8070: /* P4B */ 1403 case 0x8088: /* P4B533 */ 1404 case 0x1626: /* L3C notebook */ 1405 asus_hides_smbus = 1; 1406 } 1407 else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) 1408 switch (dev->subsystem_device) { 1409 case 0x80b1: /* P4GE-V */ 1410 case 0x80b2: /* P4PE */ 1411 case 0x8093: /* P4B533-V */ 1412 asus_hides_smbus = 1; 1413 } 1414 else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB) 1415 switch (dev->subsystem_device) { 1416 case 0x8030: /* P4T533 */ 1417 asus_hides_smbus = 1; 1418 } 1419 else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0) 1420 switch (dev->subsystem_device) { 1421 case 0x8070: /* P4G8X Deluxe */ 1422 asus_hides_smbus = 1; 1423 } 1424 else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH) 1425 switch (dev->subsystem_device) { 1426 case 0x80c9: /* PU-DLS */ 1427 asus_hides_smbus = 1; 1428 } 1429 else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB) 1430 switch (dev->subsystem_device) { 1431 case 0x1751: /* M2N notebook */ 1432 case 0x1821: /* M5N notebook */ 1433 case 0x1897: /* A6L notebook */ 1434 asus_hides_smbus = 1; 1435 } 1436 else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1437 switch (dev->subsystem_device) { 1438 case 0x184b: /* W1N notebook */ 1439 case 0x186a: /* M6Ne notebook */ 1440 asus_hides_smbus = 1; 1441 } 1442 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1443 switch (dev->subsystem_device) { 1444 case 0x80f2: /* P4P800-X */ 1445 asus_hides_smbus = 1; 1446 } 1447 else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) 1448 switch (dev->subsystem_device) { 1449 case 0x1882: /* M6V notebook */ 1450 case 0x1977: /* A6VA notebook */ 1451 asus_hides_smbus = 1; 1452 } 1453 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) { 1454 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1455 switch (dev->subsystem_device) { 1456 case 0x088C: /* HP Compaq nc8000 */ 1457 case 0x0890: /* HP Compaq nc6000 */ 1458 asus_hides_smbus = 1; 1459 } 1460 else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB) 1461 switch (dev->subsystem_device) { 1462 case 0x12bc: /* HP D330L */ 1463 case 0x12bd: /* HP D530 */ 1464 case 0x006a: /* HP Compaq nx9500 */ 1465 asus_hides_smbus = 1; 1466 } 1467 else if (dev->device == PCI_DEVICE_ID_INTEL_82875_HB) 1468 switch (dev->subsystem_device) { 1469 case 0x12bf: /* HP xw4100 */ 1470 asus_hides_smbus = 1; 1471 } 1472 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG)) { 1473 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1474 switch (dev->subsystem_device) { 1475 case 0xC00C: /* Samsung P35 notebook */ 1476 asus_hides_smbus = 1; 1477 } 1478 } else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_COMPAQ)) { 1479 if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB) 1480 switch (dev->subsystem_device) { 1481 case 0x0058: /* Compaq Evo N620c */ 1482 asus_hides_smbus = 1; 1483 } 1484 else if (dev->device == PCI_DEVICE_ID_INTEL_82810_IG3) 1485 switch (dev->subsystem_device) { 1486 case 0xB16C: /* Compaq Deskpro EP 401963-001 (PCA# 010174) */ 1487 /* Motherboard doesn't have Host bridge 1488 * subvendor/subdevice IDs, therefore checking 1489 * its on-board VGA controller */ 1490 asus_hides_smbus = 1; 1491 } 1492 else if (dev->device == PCI_DEVICE_ID_INTEL_82801DB_2) 1493 switch (dev->subsystem_device) { 1494 case 0x00b8: /* Compaq Evo D510 CMT */ 1495 case 0x00b9: /* Compaq Evo D510 SFF */ 1496 case 0x00ba: /* Compaq Evo D510 USDT */ 1497 /* Motherboard doesn't have Host bridge 1498 * subvendor/subdevice IDs and on-board VGA 1499 * controller is disabled if an AGP card is 1500 * inserted, therefore checking USB UHCI 1501 * Controller #1 */ 1502 asus_hides_smbus = 1; 1503 } 1504 else if (dev->device == PCI_DEVICE_ID_INTEL_82815_CGC) 1505 switch (dev->subsystem_device) { 1506 case 0x001A: /* Compaq Deskpro EN SSF P667 815E */ 1507 /* Motherboard doesn't have host bridge 1508 * subvendor/subdevice IDs, therefore checking 1509 * its on-board VGA controller */ 1510 asus_hides_smbus = 1; 1511 } 1512 } 1513 } 1514 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845_HB, asus_hides_smbus_hostbridge); 1515 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_HB, asus_hides_smbus_hostbridge); 1516 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82850_HB, asus_hides_smbus_hostbridge); 1517 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, asus_hides_smbus_hostbridge); 1518 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, asus_hides_smbus_hostbridge); 1519 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_7205_0, asus_hides_smbus_hostbridge); 1520 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7501_MCH, asus_hides_smbus_hostbridge); 1521 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855PM_HB, asus_hides_smbus_hostbridge); 1522 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82855GM_HB, asus_hides_smbus_hostbridge); 1523 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82915GM_HB, asus_hides_smbus_hostbridge); 1524 1525 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3, asus_hides_smbus_hostbridge); 1526 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_2, asus_hides_smbus_hostbridge); 1527 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC, asus_hides_smbus_hostbridge); 1528 1529 static void asus_hides_smbus_lpc(struct pci_dev *dev) 1530 { 1531 u16 val; 1532 1533 if (likely(!asus_hides_smbus)) 1534 return; 1535 1536 pci_read_config_word(dev, 0xF2, &val); 1537 if (val & 0x8) { 1538 pci_write_config_word(dev, 0xF2, val & (~0x8)); 1539 pci_read_config_word(dev, 0xF2, &val); 1540 if (val & 0x8) 1541 pci_info(dev, "i801 SMBus device continues to play 'hide and seek'! 0x%x\n", 1542 val); 1543 else 1544 pci_info(dev, "Enabled i801 SMBus device\n"); 1545 } 1546 } 1547 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1548 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1549 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1550 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1551 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1552 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1553 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1554 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, asus_hides_smbus_lpc); 1555 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, asus_hides_smbus_lpc); 1556 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, asus_hides_smbus_lpc); 1557 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, asus_hides_smbus_lpc); 1558 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, asus_hides_smbus_lpc); 1559 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, asus_hides_smbus_lpc); 1560 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, asus_hides_smbus_lpc); 1561 1562 /* It appears we just have one such device. If not, we have a warning */ 1563 static void __iomem *asus_rcba_base; 1564 static void asus_hides_smbus_lpc_ich6_suspend(struct pci_dev *dev) 1565 { 1566 u32 rcba; 1567 1568 if (likely(!asus_hides_smbus)) 1569 return; 1570 WARN_ON(asus_rcba_base); 1571 1572 pci_read_config_dword(dev, 0xF0, &rcba); 1573 /* use bits 31:14, 16 kB aligned */ 1574 asus_rcba_base = ioremap(rcba & 0xFFFFC000, 0x4000); 1575 if (asus_rcba_base == NULL) 1576 return; 1577 } 1578 1579 static void asus_hides_smbus_lpc_ich6_resume_early(struct pci_dev *dev) 1580 { 1581 u32 val; 1582 1583 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1584 return; 1585 1586 /* read the Function Disable register, dword mode only */ 1587 val = readl(asus_rcba_base + 0x3418); 1588 1589 /* enable the SMBus device */ 1590 writel(val & 0xFFFFFFF7, asus_rcba_base + 0x3418); 1591 } 1592 1593 static void asus_hides_smbus_lpc_ich6_resume(struct pci_dev *dev) 1594 { 1595 if (likely(!asus_hides_smbus || !asus_rcba_base)) 1596 return; 1597 1598 iounmap(asus_rcba_base); 1599 asus_rcba_base = NULL; 1600 pci_info(dev, "Enabled ICH6/i801 SMBus device\n"); 1601 } 1602 1603 static void asus_hides_smbus_lpc_ich6(struct pci_dev *dev) 1604 { 1605 asus_hides_smbus_lpc_ich6_suspend(dev); 1606 asus_hides_smbus_lpc_ich6_resume_early(dev); 1607 asus_hides_smbus_lpc_ich6_resume(dev); 1608 } 1609 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6); 1610 DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_suspend); 1611 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume); 1612 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1, asus_hides_smbus_lpc_ich6_resume_early); 1613 1614 /* SiS 96x south bridge: BIOS typically hides SMBus device... */ 1615 static void quirk_sis_96x_smbus(struct pci_dev *dev) 1616 { 1617 u8 val = 0; 1618 pci_read_config_byte(dev, 0x77, &val); 1619 if (val & 0x10) { 1620 pci_info(dev, "Enabling SiS 96x SMBus\n"); 1621 pci_write_config_byte(dev, 0x77, val & ~0x10); 1622 } 1623 } 1624 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1625 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1626 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1627 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1628 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus); 1629 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus); 1630 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus); 1631 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus); 1632 1633 /* 1634 * ... This is further complicated by the fact that some SiS96x south 1635 * bridges pretend to be 85C503/5513 instead. In that case see if we 1636 * spotted a compatible north bridge to make sure. 1637 * (pci_find_device() doesn't work yet) 1638 * 1639 * We can also enable the sis96x bit in the discovery register.. 1640 */ 1641 #define SIS_DETECT_REGISTER 0x40 1642 1643 static void quirk_sis_503(struct pci_dev *dev) 1644 { 1645 u8 reg; 1646 u16 devid; 1647 1648 pci_read_config_byte(dev, SIS_DETECT_REGISTER, ®); 1649 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg | (1 << 6)); 1650 pci_read_config_word(dev, PCI_DEVICE_ID, &devid); 1651 if (((devid & 0xfff0) != 0x0960) && (devid != 0x0018)) { 1652 pci_write_config_byte(dev, SIS_DETECT_REGISTER, reg); 1653 return; 1654 } 1655 1656 /* 1657 * Ok, it now shows up as a 96x. Run the 96x quirk by hand in case 1658 * it has already been processed. (Depends on link order, which is 1659 * apparently not guaranteed) 1660 */ 1661 dev->device = devid; 1662 quirk_sis_96x_smbus(dev); 1663 } 1664 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1665 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503); 1666 1667 /* 1668 * On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller 1669 * and MC97 modem controller are disabled when a second PCI soundcard is 1670 * present. This patch, tweaking the VT8237 ISA bridge, enables them. 1671 * -- bjd 1672 */ 1673 static void asus_hides_ac97_lpc(struct pci_dev *dev) 1674 { 1675 u8 val; 1676 int asus_hides_ac97 = 0; 1677 1678 if (likely(dev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK)) { 1679 if (dev->device == PCI_DEVICE_ID_VIA_8237) 1680 asus_hides_ac97 = 1; 1681 } 1682 1683 if (!asus_hides_ac97) 1684 return; 1685 1686 pci_read_config_byte(dev, 0x50, &val); 1687 if (val & 0xc0) { 1688 pci_write_config_byte(dev, 0x50, val & (~0xc0)); 1689 pci_read_config_byte(dev, 0x50, &val); 1690 if (val & 0xc0) 1691 pci_info(dev, "Onboard AC97/MC97 devices continue to play 'hide and seek'! 0x%x\n", 1692 val); 1693 else 1694 pci_info(dev, "Enabled onboard AC97/MC97 devices\n"); 1695 } 1696 } 1697 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1698 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc); 1699 1700 #if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE) 1701 1702 /* 1703 * If we are using libata we can drive this chip properly but must do this 1704 * early on to make the additional device appear during the PCI scanning. 1705 */ 1706 static void quirk_jmicron_ata(struct pci_dev *pdev) 1707 { 1708 u32 conf1, conf5, class; 1709 u8 hdr; 1710 1711 /* Only poke fn 0 */ 1712 if (PCI_FUNC(pdev->devfn)) 1713 return; 1714 1715 pci_read_config_dword(pdev, 0x40, &conf1); 1716 pci_read_config_dword(pdev, 0x80, &conf5); 1717 1718 conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */ 1719 conf5 &= ~(1 << 24); /* Clear bit 24 */ 1720 1721 switch (pdev->device) { 1722 case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */ 1723 case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */ 1724 case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */ 1725 /* The controller should be in single function ahci mode */ 1726 conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */ 1727 break; 1728 1729 case PCI_DEVICE_ID_JMICRON_JMB365: 1730 case PCI_DEVICE_ID_JMICRON_JMB366: 1731 /* Redirect IDE second PATA port to the right spot */ 1732 conf5 |= (1 << 24); 1733 /* Fall through */ 1734 case PCI_DEVICE_ID_JMICRON_JMB361: 1735 case PCI_DEVICE_ID_JMICRON_JMB363: 1736 case PCI_DEVICE_ID_JMICRON_JMB369: 1737 /* Enable dual function mode, AHCI on fn 0, IDE fn1 */ 1738 /* Set the class codes correctly and then direct IDE 0 */ 1739 conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */ 1740 break; 1741 1742 case PCI_DEVICE_ID_JMICRON_JMB368: 1743 /* The controller should be in single function IDE mode */ 1744 conf1 |= 0x00C00000; /* Set 22, 23 */ 1745 break; 1746 } 1747 1748 pci_write_config_dword(pdev, 0x40, conf1); 1749 pci_write_config_dword(pdev, 0x80, conf5); 1750 1751 /* Update pdev accordingly */ 1752 pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr); 1753 pdev->hdr_type = hdr & 0x7f; 1754 pdev->multifunction = !!(hdr & 0x80); 1755 1756 pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class); 1757 pdev->class = class >> 8; 1758 } 1759 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1760 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1761 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1762 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1763 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1764 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1765 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1766 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1767 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1768 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata); 1769 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata); 1770 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata); 1771 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata); 1772 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata); 1773 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata); 1774 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata); 1775 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata); 1776 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata); 1777 1778 #endif 1779 1780 static void quirk_jmicron_async_suspend(struct pci_dev *dev) 1781 { 1782 if (dev->multifunction) { 1783 device_disable_async_suspend(&dev->dev); 1784 pci_info(dev, "async suspend disabled to avoid multi-function power-on ordering issue\n"); 1785 } 1786 } 1787 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE, 8, quirk_jmicron_async_suspend); 1788 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0, quirk_jmicron_async_suspend); 1789 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x2362, quirk_jmicron_async_suspend); 1790 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_JMICRON, 0x236f, quirk_jmicron_async_suspend); 1791 1792 #ifdef CONFIG_X86_IO_APIC 1793 static void quirk_alder_ioapic(struct pci_dev *pdev) 1794 { 1795 int i; 1796 1797 if ((pdev->class >> 8) != 0xff00) 1798 return; 1799 1800 /* 1801 * The first BAR is the location of the IO-APIC... we must 1802 * not touch this (and it's already covered by the fixmap), so 1803 * forcibly insert it into the resource tree. 1804 */ 1805 if (pci_resource_start(pdev, 0) && pci_resource_len(pdev, 0)) 1806 insert_resource(&iomem_resource, &pdev->resource[0]); 1807 1808 /* 1809 * The next five BARs all seem to be rubbish, so just clean 1810 * them out. 1811 */ 1812 for (i = 1; i < PCI_STD_NUM_BARS; i++) 1813 memset(&pdev->resource[i], 0, sizeof(pdev->resource[i])); 1814 } 1815 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EESSC, quirk_alder_ioapic); 1816 #endif 1817 1818 static void quirk_pcie_mch(struct pci_dev *pdev) 1819 { 1820 pdev->no_msi = 1; 1821 } 1822 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7520_MCH, quirk_pcie_mch); 1823 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7320_MCH, quirk_pcie_mch); 1824 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_E7525_MCH, quirk_pcie_mch); 1825 1826 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch); 1827 1828 /* 1829 * It's possible for the MSI to get corrupted if SHPC and ACPI are used 1830 * together on certain PXH-based systems. 1831 */ 1832 static void quirk_pcie_pxh(struct pci_dev *dev) 1833 { 1834 dev->no_msi = 1; 1835 pci_warn(dev, "PXH quirk detected; SHPC device MSI disabled\n"); 1836 } 1837 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_0, quirk_pcie_pxh); 1838 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHD_1, quirk_pcie_pxh); 1839 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_pcie_pxh); 1840 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_pcie_pxh); 1841 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_pcie_pxh); 1842 1843 /* 1844 * Some Intel PCI Express chipsets have trouble with downstream device 1845 * power management. 1846 */ 1847 static void quirk_intel_pcie_pm(struct pci_dev *dev) 1848 { 1849 pci_pm_d3_delay = 120; 1850 dev->no_d1d2 = 1; 1851 } 1852 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_pcie_pm); 1853 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_pcie_pm); 1854 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_pcie_pm); 1855 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_pcie_pm); 1856 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_pcie_pm); 1857 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_pcie_pm); 1858 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_pcie_pm); 1859 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_pcie_pm); 1860 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_pcie_pm); 1861 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_pcie_pm); 1862 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2601, quirk_intel_pcie_pm); 1863 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2602, quirk_intel_pcie_pm); 1864 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2603, quirk_intel_pcie_pm); 1865 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2604, quirk_intel_pcie_pm); 1866 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2605, quirk_intel_pcie_pm); 1867 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2606, quirk_intel_pcie_pm); 1868 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2607, quirk_intel_pcie_pm); 1869 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2608, quirk_intel_pcie_pm); 1870 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2609, quirk_intel_pcie_pm); 1871 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm); 1872 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm); 1873 1874 static void quirk_d3hot_delay(struct pci_dev *dev, unsigned int delay) 1875 { 1876 if (dev->d3_delay >= delay) 1877 return; 1878 1879 dev->d3_delay = delay; 1880 pci_info(dev, "extending delay after power-on from D3hot to %d msec\n", 1881 dev->d3_delay); 1882 } 1883 1884 static void quirk_radeon_pm(struct pci_dev *dev) 1885 { 1886 if (dev->subsystem_vendor == PCI_VENDOR_ID_APPLE && 1887 dev->subsystem_device == 0x00e2) 1888 quirk_d3hot_delay(dev, 20); 1889 } 1890 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6741, quirk_radeon_pm); 1891 1892 /* 1893 * Ryzen5/7 XHCI controllers fail upon resume from runtime suspend or s2idle. 1894 * https://bugzilla.kernel.org/show_bug.cgi?id=205587 1895 * 1896 * The kernel attempts to transition these devices to D3cold, but that seems 1897 * to be ineffective on the platforms in question; the PCI device appears to 1898 * remain on in D3hot state. The D3hot-to-D0 transition then requires an 1899 * extended delay in order to succeed. 1900 */ 1901 static void quirk_ryzen_xhci_d3hot(struct pci_dev *dev) 1902 { 1903 quirk_d3hot_delay(dev, 20); 1904 } 1905 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e0, quirk_ryzen_xhci_d3hot); 1906 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x15e1, quirk_ryzen_xhci_d3hot); 1907 1908 #ifdef CONFIG_X86_IO_APIC 1909 static int dmi_disable_ioapicreroute(const struct dmi_system_id *d) 1910 { 1911 noioapicreroute = 1; 1912 pr_info("%s detected: disable boot interrupt reroute\n", d->ident); 1913 1914 return 0; 1915 } 1916 1917 static const struct dmi_system_id boot_interrupt_dmi_table[] = { 1918 /* 1919 * Systems to exclude from boot interrupt reroute quirks 1920 */ 1921 { 1922 .callback = dmi_disable_ioapicreroute, 1923 .ident = "ASUSTek Computer INC. M2N-LR", 1924 .matches = { 1925 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTek Computer INC."), 1926 DMI_MATCH(DMI_PRODUCT_NAME, "M2N-LR"), 1927 }, 1928 }, 1929 {} 1930 }; 1931 1932 /* 1933 * Boot interrupts on some chipsets cannot be turned off. For these chipsets, 1934 * remap the original interrupt in the Linux kernel to the boot interrupt, so 1935 * that a PCI device's interrupt handler is installed on the boot interrupt 1936 * line instead. 1937 */ 1938 static void quirk_reroute_to_boot_interrupts_intel(struct pci_dev *dev) 1939 { 1940 dmi_check_system(boot_interrupt_dmi_table); 1941 if (noioapicquirk || noioapicreroute) 1942 return; 1943 1944 dev->irq_reroute_variant = INTEL_IRQ_REROUTE_VARIANT; 1945 pci_info(dev, "rerouting interrupts for [%04x:%04x]\n", 1946 dev->vendor, dev->device); 1947 } 1948 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1949 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1950 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1951 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1952 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1953 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1954 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1955 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1956 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_0, quirk_reroute_to_boot_interrupts_intel); 1957 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80333_1, quirk_reroute_to_boot_interrupts_intel); 1958 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB2_0, quirk_reroute_to_boot_interrupts_intel); 1959 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_0, quirk_reroute_to_boot_interrupts_intel); 1960 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXH_1, quirk_reroute_to_boot_interrupts_intel); 1961 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PXHV, quirk_reroute_to_boot_interrupts_intel); 1962 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_0, quirk_reroute_to_boot_interrupts_intel); 1963 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_80332_1, quirk_reroute_to_boot_interrupts_intel); 1964 1965 /* 1966 * On some chipsets we can disable the generation of legacy INTx boot 1967 * interrupts. 1968 */ 1969 1970 /* 1971 * IO-APIC1 on 6300ESB generates boot interrupts, see Intel order no 1972 * 300641-004US, section 5.7.3. 1973 * 1974 * Core IO on Xeon E5 1600/2600/4600, see Intel order no 326509-003. 1975 * Core IO on Xeon E5 v2, see Intel order no 329188-003. 1976 * Core IO on Xeon E7 v2, see Intel order no 329595-002. 1977 * Core IO on Xeon E5 v3, see Intel order no 330784-003. 1978 * Core IO on Xeon E7 v3, see Intel order no 332315-001US. 1979 * Core IO on Xeon E5 v4, see Intel order no 333810-002US. 1980 * Core IO on Xeon E7 v4, see Intel order no 332315-001US. 1981 * Core IO on Xeon D-1500, see Intel order no 332051-001. 1982 * Core IO on Xeon Scalable, see Intel order no 610950. 1983 */ 1984 #define INTEL_6300_IOAPIC_ABAR 0x40 /* Bus 0, Dev 29, Func 5 */ 1985 #define INTEL_6300_DISABLE_BOOT_IRQ (1<<14) 1986 1987 #define INTEL_CIPINTRC_CFG_OFFSET 0x14C /* Bus 0, Dev 5, Func 0 */ 1988 #define INTEL_CIPINTRC_DIS_INTX_ICH (1<<25) 1989 1990 static void quirk_disable_intel_boot_interrupt(struct pci_dev *dev) 1991 { 1992 u16 pci_config_word; 1993 u32 pci_config_dword; 1994 1995 if (noioapicquirk) 1996 return; 1997 1998 switch (dev->device) { 1999 case PCI_DEVICE_ID_INTEL_ESB_10: 2000 pci_read_config_word(dev, INTEL_6300_IOAPIC_ABAR, 2001 &pci_config_word); 2002 pci_config_word |= INTEL_6300_DISABLE_BOOT_IRQ; 2003 pci_write_config_word(dev, INTEL_6300_IOAPIC_ABAR, 2004 pci_config_word); 2005 break; 2006 case 0x3c28: /* Xeon E5 1600/2600/4600 */ 2007 case 0x0e28: /* Xeon E5/E7 V2 */ 2008 case 0x2f28: /* Xeon E5/E7 V3,V4 */ 2009 case 0x6f28: /* Xeon D-1500 */ 2010 case 0x2034: /* Xeon Scalable Family */ 2011 pci_read_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, 2012 &pci_config_dword); 2013 pci_config_dword |= INTEL_CIPINTRC_DIS_INTX_ICH; 2014 pci_write_config_dword(dev, INTEL_CIPINTRC_CFG_OFFSET, 2015 pci_config_dword); 2016 break; 2017 default: 2018 return; 2019 } 2020 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", 2021 dev->vendor, dev->device); 2022 } 2023 /* 2024 * Device 29 Func 5 Device IDs of IO-APIC 2025 * containing ABAR—APIC1 Alternate Base Address Register 2026 */ 2027 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, 2028 quirk_disable_intel_boot_interrupt); 2029 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_10, 2030 quirk_disable_intel_boot_interrupt); 2031 2032 /* 2033 * Device 5 Func 0 Device IDs of Core IO modules/hubs 2034 * containing Coherent Interface Protocol Interrupt Control 2035 * 2036 * Device IDs obtained from volume 2 datasheets of commented 2037 * families above. 2038 */ 2039 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x3c28, 2040 quirk_disable_intel_boot_interrupt); 2041 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0e28, 2042 quirk_disable_intel_boot_interrupt); 2043 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2f28, 2044 quirk_disable_intel_boot_interrupt); 2045 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x6f28, 2046 quirk_disable_intel_boot_interrupt); 2047 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2034, 2048 quirk_disable_intel_boot_interrupt); 2049 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x3c28, 2050 quirk_disable_intel_boot_interrupt); 2051 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x0e28, 2052 quirk_disable_intel_boot_interrupt); 2053 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2f28, 2054 quirk_disable_intel_boot_interrupt); 2055 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x6f28, 2056 quirk_disable_intel_boot_interrupt); 2057 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_INTEL, 0x2034, 2058 quirk_disable_intel_boot_interrupt); 2059 2060 /* Disable boot interrupts on HT-1000 */ 2061 #define BC_HT1000_FEATURE_REG 0x64 2062 #define BC_HT1000_PIC_REGS_ENABLE (1<<0) 2063 #define BC_HT1000_MAP_IDX 0xC00 2064 #define BC_HT1000_MAP_DATA 0xC01 2065 2066 static void quirk_disable_broadcom_boot_interrupt(struct pci_dev *dev) 2067 { 2068 u32 pci_config_dword; 2069 u8 irq; 2070 2071 if (noioapicquirk) 2072 return; 2073 2074 pci_read_config_dword(dev, BC_HT1000_FEATURE_REG, &pci_config_dword); 2075 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword | 2076 BC_HT1000_PIC_REGS_ENABLE); 2077 2078 for (irq = 0x10; irq < 0x10 + 32; irq++) { 2079 outb(irq, BC_HT1000_MAP_IDX); 2080 outb(0x00, BC_HT1000_MAP_DATA); 2081 } 2082 2083 pci_write_config_dword(dev, BC_HT1000_FEATURE_REG, pci_config_dword); 2084 2085 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", 2086 dev->vendor, dev->device); 2087 } 2088 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 2089 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000SB, quirk_disable_broadcom_boot_interrupt); 2090 2091 /* Disable boot interrupts on AMD and ATI chipsets */ 2092 2093 /* 2094 * NOIOAMODE needs to be disabled to disable "boot interrupts". For AMD 8131 2095 * rev. A0 and B0, NOIOAMODE needs to be disabled anyway to fix IO-APIC mode 2096 * (due to an erratum). 2097 */ 2098 #define AMD_813X_MISC 0x40 2099 #define AMD_813X_NOIOAMODE (1<<0) 2100 #define AMD_813X_REV_B1 0x12 2101 #define AMD_813X_REV_B2 0x13 2102 2103 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) 2104 { 2105 u32 pci_config_dword; 2106 2107 if (noioapicquirk) 2108 return; 2109 if ((dev->revision == AMD_813X_REV_B1) || 2110 (dev->revision == AMD_813X_REV_B2)) 2111 return; 2112 2113 pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); 2114 pci_config_dword &= ~AMD_813X_NOIOAMODE; 2115 pci_write_config_dword(dev, AMD_813X_MISC, pci_config_dword); 2116 2117 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", 2118 dev->vendor, dev->device); 2119 } 2120 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 2121 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 2122 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 2123 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, quirk_disable_amd_813x_boot_interrupt); 2124 2125 #define AMD_8111_PCI_IRQ_ROUTING 0x56 2126 2127 static void quirk_disable_amd_8111_boot_interrupt(struct pci_dev *dev) 2128 { 2129 u16 pci_config_word; 2130 2131 if (noioapicquirk) 2132 return; 2133 2134 pci_read_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, &pci_config_word); 2135 if (!pci_config_word) { 2136 pci_info(dev, "boot interrupts on device [%04x:%04x] already disabled\n", 2137 dev->vendor, dev->device); 2138 return; 2139 } 2140 pci_write_config_word(dev, AMD_8111_PCI_IRQ_ROUTING, 0); 2141 pci_info(dev, "disabled boot interrupts on device [%04x:%04x]\n", 2142 dev->vendor, dev->device); 2143 } 2144 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 2145 DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS, quirk_disable_amd_8111_boot_interrupt); 2146 #endif /* CONFIG_X86_IO_APIC */ 2147 2148 /* 2149 * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size 2150 * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes. 2151 * Re-allocate the region if needed... 2152 */ 2153 static void quirk_tc86c001_ide(struct pci_dev *dev) 2154 { 2155 struct resource *r = &dev->resource[0]; 2156 2157 if (r->start & 0x8) { 2158 r->flags |= IORESOURCE_UNSET; 2159 r->start = 0; 2160 r->end = 0xf; 2161 } 2162 } 2163 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2, 2164 PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE, 2165 quirk_tc86c001_ide); 2166 2167 /* 2168 * PLX PCI 9050 PCI Target bridge controller has an erratum that prevents the 2169 * local configuration registers accessible via BAR0 (memory) or BAR1 (i/o) 2170 * being read correctly if bit 7 of the base address is set. 2171 * The BAR0 or BAR1 region may be disabled (size 0) or enabled (size 128). 2172 * Re-allocate the regions to a 256-byte boundary if necessary. 2173 */ 2174 static void quirk_plx_pci9050(struct pci_dev *dev) 2175 { 2176 unsigned int bar; 2177 2178 /* Fixed in revision 2 (PCI 9052). */ 2179 if (dev->revision >= 2) 2180 return; 2181 for (bar = 0; bar <= 1; bar++) 2182 if (pci_resource_len(dev, bar) == 0x80 && 2183 (pci_resource_start(dev, bar) & 0x80)) { 2184 struct resource *r = &dev->resource[bar]; 2185 pci_info(dev, "Re-allocating PLX PCI 9050 BAR %u to length 256 to avoid bit 7 bug\n", 2186 bar); 2187 r->flags |= IORESOURCE_UNSET; 2188 r->start = 0; 2189 r->end = 0xff; 2190 } 2191 } 2192 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, 2193 quirk_plx_pci9050); 2194 /* 2195 * The following Meilhaus (vendor ID 0x1402) device IDs (amongst others) 2196 * may be using the PLX PCI 9050: 0x0630, 0x0940, 0x0950, 0x0960, 0x100b, 2197 * 0x1400, 0x140a, 0x140b, 0x14e0, 0x14ea, 0x14eb, 0x1604, 0x1608, 0x160c, 2198 * 0x168f, 0x2000, 0x2600, 0x3000, 0x810a, 0x810b. 2199 * 2200 * Currently, device IDs 0x2000 and 0x2600 are used by the Comedi "me_daq" 2201 * driver. 2202 */ 2203 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2000, quirk_plx_pci9050); 2204 DECLARE_PCI_FIXUP_HEADER(0x1402, 0x2600, quirk_plx_pci9050); 2205 2206 static void quirk_netmos(struct pci_dev *dev) 2207 { 2208 unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4; 2209 unsigned int num_serial = dev->subsystem_device & 0xf; 2210 2211 /* 2212 * These Netmos parts are multiport serial devices with optional 2213 * parallel ports. Even when parallel ports are present, they 2214 * are identified as class SERIAL, which means the serial driver 2215 * will claim them. To prevent this, mark them as class OTHER. 2216 * These combo devices should be claimed by parport_serial. 2217 * 2218 * The subdevice ID is of the form 0x00PS, where <P> is the number 2219 * of parallel ports and <S> is the number of serial ports. 2220 */ 2221 switch (dev->device) { 2222 case PCI_DEVICE_ID_NETMOS_9835: 2223 /* Well, this rule doesn't hold for the following 9835 device */ 2224 if (dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 2225 dev->subsystem_device == 0x0299) 2226 return; 2227 /* else, fall through */ 2228 case PCI_DEVICE_ID_NETMOS_9735: 2229 case PCI_DEVICE_ID_NETMOS_9745: 2230 case PCI_DEVICE_ID_NETMOS_9845: 2231 case PCI_DEVICE_ID_NETMOS_9855: 2232 if (num_parallel) { 2233 pci_info(dev, "Netmos %04x (%u parallel, %u serial); changing class SERIAL to OTHER (use parport_serial)\n", 2234 dev->device, num_parallel, num_serial); 2235 dev->class = (PCI_CLASS_COMMUNICATION_OTHER << 8) | 2236 (dev->class & 0xff); 2237 } 2238 } 2239 } 2240 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NETMOS, PCI_ANY_ID, 2241 PCI_CLASS_COMMUNICATION_SERIAL, 8, quirk_netmos); 2242 2243 static void quirk_e100_interrupt(struct pci_dev *dev) 2244 { 2245 u16 command, pmcsr; 2246 u8 __iomem *csr; 2247 u8 cmd_hi; 2248 2249 switch (dev->device) { 2250 /* PCI IDs taken from drivers/net/e100.c */ 2251 case 0x1029: 2252 case 0x1030 ... 0x1034: 2253 case 0x1038 ... 0x103E: 2254 case 0x1050 ... 0x1057: 2255 case 0x1059: 2256 case 0x1064 ... 0x106B: 2257 case 0x1091 ... 0x1095: 2258 case 0x1209: 2259 case 0x1229: 2260 case 0x2449: 2261 case 0x2459: 2262 case 0x245D: 2263 case 0x27DC: 2264 break; 2265 default: 2266 return; 2267 } 2268 2269 /* 2270 * Some firmware hands off the e100 with interrupts enabled, 2271 * which can cause a flood of interrupts if packets are 2272 * received before the driver attaches to the device. So 2273 * disable all e100 interrupts here. The driver will 2274 * re-enable them when it's ready. 2275 */ 2276 pci_read_config_word(dev, PCI_COMMAND, &command); 2277 2278 if (!(command & PCI_COMMAND_MEMORY) || !pci_resource_start(dev, 0)) 2279 return; 2280 2281 /* 2282 * Check that the device is in the D0 power state. If it's not, 2283 * there is no point to look any further. 2284 */ 2285 if (dev->pm_cap) { 2286 pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); 2287 if ((pmcsr & PCI_PM_CTRL_STATE_MASK) != PCI_D0) 2288 return; 2289 } 2290 2291 /* Convert from PCI bus to resource space. */ 2292 csr = ioremap(pci_resource_start(dev, 0), 8); 2293 if (!csr) { 2294 pci_warn(dev, "Can't map e100 registers\n"); 2295 return; 2296 } 2297 2298 cmd_hi = readb(csr + 3); 2299 if (cmd_hi == 0) { 2300 pci_warn(dev, "Firmware left e100 interrupts enabled; disabling\n"); 2301 writeb(1, csr + 3); 2302 } 2303 2304 iounmap(csr); 2305 } 2306 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 2307 PCI_CLASS_NETWORK_ETHERNET, 8, quirk_e100_interrupt); 2308 2309 /* 2310 * The 82575 and 82598 may experience data corruption issues when transitioning 2311 * out of L0S. To prevent this we need to disable L0S on the PCIe link. 2312 */ 2313 static void quirk_disable_aspm_l0s(struct pci_dev *dev) 2314 { 2315 pci_info(dev, "Disabling L0s\n"); 2316 pci_disable_link_state(dev, PCIE_LINK_STATE_L0S); 2317 } 2318 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a7, quirk_disable_aspm_l0s); 2319 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10a9, quirk_disable_aspm_l0s); 2320 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10b6, quirk_disable_aspm_l0s); 2321 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c6, quirk_disable_aspm_l0s); 2322 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c7, quirk_disable_aspm_l0s); 2323 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10c8, quirk_disable_aspm_l0s); 2324 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10d6, quirk_disable_aspm_l0s); 2325 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10db, quirk_disable_aspm_l0s); 2326 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10dd, quirk_disable_aspm_l0s); 2327 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10e1, quirk_disable_aspm_l0s); 2328 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10ec, quirk_disable_aspm_l0s); 2329 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f1, quirk_disable_aspm_l0s); 2330 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x10f4, quirk_disable_aspm_l0s); 2331 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1508, quirk_disable_aspm_l0s); 2332 2333 /* 2334 * Some Pericom PCIe-to-PCI bridges in reverse mode need the PCIe Retrain 2335 * Link bit cleared after starting the link retrain process to allow this 2336 * process to finish. 2337 * 2338 * Affected devices: PI7C9X110, PI7C9X111SL, PI7C9X130. See also the 2339 * Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf. 2340 */ 2341 static void quirk_enable_clear_retrain_link(struct pci_dev *dev) 2342 { 2343 dev->clear_retrain_link = 1; 2344 pci_info(dev, "Enable PCIe Retrain Link quirk\n"); 2345 } 2346 DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe110, quirk_enable_clear_retrain_link); 2347 DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe111, quirk_enable_clear_retrain_link); 2348 DECLARE_PCI_FIXUP_HEADER(0x12d8, 0xe130, quirk_enable_clear_retrain_link); 2349 2350 static void fixup_rev1_53c810(struct pci_dev *dev) 2351 { 2352 u32 class = dev->class; 2353 2354 /* 2355 * rev 1 ncr53c810 chips don't set the class at all which means 2356 * they don't get their resources remapped. Fix that here. 2357 */ 2358 if (class) 2359 return; 2360 2361 dev->class = PCI_CLASS_STORAGE_SCSI << 8; 2362 pci_info(dev, "NCR 53c810 rev 1 PCI class overridden (%#08x -> %#08x)\n", 2363 class, dev->class); 2364 } 2365 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810); 2366 2367 /* Enable 1k I/O space granularity on the Intel P64H2 */ 2368 static void quirk_p64h2_1k_io(struct pci_dev *dev) 2369 { 2370 u16 en1k; 2371 2372 pci_read_config_word(dev, 0x40, &en1k); 2373 2374 if (en1k & 0x200) { 2375 pci_info(dev, "Enable I/O Space to 1KB granularity\n"); 2376 dev->io_window_1k = 1; 2377 } 2378 } 2379 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io); 2380 2381 /* 2382 * Under some circumstances, AER is not linked with extended capabilities. 2383 * Force it to be linked by setting the corresponding control bit in the 2384 * config space. 2385 */ 2386 static void quirk_nvidia_ck804_pcie_aer_ext_cap(struct pci_dev *dev) 2387 { 2388 uint8_t b; 2389 2390 if (pci_read_config_byte(dev, 0xf41, &b) == 0) { 2391 if (!(b & 0x20)) { 2392 pci_write_config_byte(dev, 0xf41, b | 0x20); 2393 pci_info(dev, "Linking AER extended capability\n"); 2394 } 2395 } 2396 } 2397 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2398 quirk_nvidia_ck804_pcie_aer_ext_cap); 2399 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2400 quirk_nvidia_ck804_pcie_aer_ext_cap); 2401 2402 static void quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) 2403 { 2404 /* 2405 * Disable PCI Bus Parking and PCI Master read caching on CX700 2406 * which causes unspecified timing errors with a VT6212L on the PCI 2407 * bus leading to USB2.0 packet loss. 2408 * 2409 * This quirk is only enabled if a second (on the external PCI bus) 2410 * VT6212L is found -- the CX700 core itself also contains a USB 2411 * host controller with the same PCI ID as the VT6212L. 2412 */ 2413 2414 /* Count VT6212L instances */ 2415 struct pci_dev *p = pci_get_device(PCI_VENDOR_ID_VIA, 2416 PCI_DEVICE_ID_VIA_8235_USB_2, NULL); 2417 uint8_t b; 2418 2419 /* 2420 * p should contain the first (internal) VT6212L -- see if we have 2421 * an external one by searching again. 2422 */ 2423 p = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235_USB_2, p); 2424 if (!p) 2425 return; 2426 pci_dev_put(p); 2427 2428 if (pci_read_config_byte(dev, 0x76, &b) == 0) { 2429 if (b & 0x40) { 2430 /* Turn off PCI Bus Parking */ 2431 pci_write_config_byte(dev, 0x76, b ^ 0x40); 2432 2433 pci_info(dev, "Disabling VIA CX700 PCI parking\n"); 2434 } 2435 } 2436 2437 if (pci_read_config_byte(dev, 0x72, &b) == 0) { 2438 if (b != 0) { 2439 /* Turn off PCI Master read caching */ 2440 pci_write_config_byte(dev, 0x72, 0x0); 2441 2442 /* Set PCI Master Bus time-out to "1x16 PCLK" */ 2443 pci_write_config_byte(dev, 0x75, 0x1); 2444 2445 /* Disable "Read FIFO Timer" */ 2446 pci_write_config_byte(dev, 0x77, 0x0); 2447 2448 pci_info(dev, "Disabling VIA CX700 PCI caching\n"); 2449 } 2450 } 2451 } 2452 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); 2453 2454 static void quirk_brcm_5719_limit_mrrs(struct pci_dev *dev) 2455 { 2456 u32 rev; 2457 2458 pci_read_config_dword(dev, 0xf4, &rev); 2459 2460 /* Only CAP the MRRS if the device is a 5719 A0 */ 2461 if (rev == 0x05719000) { 2462 int readrq = pcie_get_readrq(dev); 2463 if (readrq > 2048) 2464 pcie_set_readrq(dev, 2048); 2465 } 2466 } 2467 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_BROADCOM, 2468 PCI_DEVICE_ID_TIGON3_5719, 2469 quirk_brcm_5719_limit_mrrs); 2470 2471 /* 2472 * Originally in EDAC sources for i82875P: Intel tells BIOS developers to 2473 * hide device 6 which configures the overflow device access containing the 2474 * DRBs - this is where we expose device 6. 2475 * http://www.x86-secret.com/articles/tweak/pat/patsecrets-2.htm 2476 */ 2477 static void quirk_unhide_mch_dev6(struct pci_dev *dev) 2478 { 2479 u8 reg; 2480 2481 if (pci_read_config_byte(dev, 0xF4, ®) == 0 && !(reg & 0x02)) { 2482 pci_info(dev, "Enabling MCH 'Overflow' Device\n"); 2483 pci_write_config_byte(dev, 0xF4, reg | 0x02); 2484 } 2485 } 2486 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, 2487 quirk_unhide_mch_dev6); 2488 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, 2489 quirk_unhide_mch_dev6); 2490 2491 #ifdef CONFIG_PCI_MSI 2492 /* 2493 * Some chipsets do not support MSI. We cannot easily rely on setting 2494 * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually some 2495 * other buses controlled by the chipset even if Linux is not aware of it. 2496 * Instead of setting the flag on all buses in the machine, simply disable 2497 * MSI globally. 2498 */ 2499 static void quirk_disable_all_msi(struct pci_dev *dev) 2500 { 2501 pci_no_msi(); 2502 pci_warn(dev, "MSI quirk detected; MSI disabled\n"); 2503 } 2504 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); 2505 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); 2506 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); 2507 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); 2508 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); 2509 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi); 2510 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8380_0, quirk_disable_all_msi); 2511 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, 0x0761, quirk_disable_all_msi); 2512 2513 /* Disable MSI on chipsets that are known to not support it */ 2514 static void quirk_disable_msi(struct pci_dev *dev) 2515 { 2516 if (dev->subordinate) { 2517 pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n"); 2518 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2519 } 2520 } 2521 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_disable_msi); 2522 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, 0xa238, quirk_disable_msi); 2523 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x5a3f, quirk_disable_msi); 2524 2525 /* 2526 * The APC bridge device in AMD 780 family northbridges has some random 2527 * OEM subsystem ID in its vendor ID register (erratum 18), so instead 2528 * we use the possible vendor/device IDs of the host bridge for the 2529 * declared quirk, and search for the APC bridge by slot number. 2530 */ 2531 static void quirk_amd_780_apc_msi(struct pci_dev *host_bridge) 2532 { 2533 struct pci_dev *apc_bridge; 2534 2535 apc_bridge = pci_get_slot(host_bridge->bus, PCI_DEVFN(1, 0)); 2536 if (apc_bridge) { 2537 if (apc_bridge->device == 0x9602) 2538 quirk_disable_msi(apc_bridge); 2539 pci_dev_put(apc_bridge); 2540 } 2541 } 2542 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9600, quirk_amd_780_apc_msi); 2543 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, 0x9601, quirk_amd_780_apc_msi); 2544 2545 /* 2546 * Go through the list of HyperTransport capabilities and return 1 if a HT 2547 * MSI capability is found and enabled. 2548 */ 2549 static int msi_ht_cap_enabled(struct pci_dev *dev) 2550 { 2551 int pos, ttl = PCI_FIND_CAP_TTL; 2552 2553 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2554 while (pos && ttl--) { 2555 u8 flags; 2556 2557 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2558 &flags) == 0) { 2559 pci_info(dev, "Found %s HT MSI Mapping\n", 2560 flags & HT_MSI_FLAGS_ENABLE ? 2561 "enabled" : "disabled"); 2562 return (flags & HT_MSI_FLAGS_ENABLE) != 0; 2563 } 2564 2565 pos = pci_find_next_ht_capability(dev, pos, 2566 HT_CAPTYPE_MSI_MAPPING); 2567 } 2568 return 0; 2569 } 2570 2571 /* Check the HyperTransport MSI mapping to know whether MSI is enabled or not */ 2572 static void quirk_msi_ht_cap(struct pci_dev *dev) 2573 { 2574 if (dev->subordinate && !msi_ht_cap_enabled(dev)) { 2575 pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n"); 2576 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2577 } 2578 } 2579 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, 2580 quirk_msi_ht_cap); 2581 2582 /* 2583 * The nVidia CK804 chipset may have 2 HT MSI mappings. MSI is supported 2584 * if the MSI capability is set in any of these mappings. 2585 */ 2586 static void quirk_nvidia_ck804_msi_ht_cap(struct pci_dev *dev) 2587 { 2588 struct pci_dev *pdev; 2589 2590 if (!dev->subordinate) 2591 return; 2592 2593 /* 2594 * Check HT MSI cap on this chipset and the root one. A single one 2595 * having MSI is enough to be sure that MSI is supported. 2596 */ 2597 pdev = pci_get_slot(dev->bus, 0); 2598 if (!pdev) 2599 return; 2600 if (!msi_ht_cap_enabled(dev) && !msi_ht_cap_enabled(pdev)) { 2601 pci_warn(dev, "MSI quirk detected; subordinate MSI disabled\n"); 2602 dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI; 2603 } 2604 pci_dev_put(pdev); 2605 } 2606 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE, 2607 quirk_nvidia_ck804_msi_ht_cap); 2608 2609 /* Force enable MSI mapping capability on HT bridges */ 2610 static void ht_enable_msi_mapping(struct pci_dev *dev) 2611 { 2612 int pos, ttl = PCI_FIND_CAP_TTL; 2613 2614 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2615 while (pos && ttl--) { 2616 u8 flags; 2617 2618 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2619 &flags) == 0) { 2620 pci_info(dev, "Enabling HT MSI Mapping\n"); 2621 2622 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2623 flags | HT_MSI_FLAGS_ENABLE); 2624 } 2625 pos = pci_find_next_ht_capability(dev, pos, 2626 HT_CAPTYPE_MSI_MAPPING); 2627 } 2628 } 2629 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 2630 PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, 2631 ht_enable_msi_mapping); 2632 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, 2633 ht_enable_msi_mapping); 2634 2635 /* 2636 * The P5N32-SLI motherboards from Asus have a problem with MSI 2637 * for the MCP55 NIC. It is not yet determined whether the MSI problem 2638 * also affects other devices. As for now, turn off MSI for this device. 2639 */ 2640 static void nvenet_msi_disable(struct pci_dev *dev) 2641 { 2642 const char *board_name = dmi_get_system_info(DMI_BOARD_NAME); 2643 2644 if (board_name && 2645 (strstr(board_name, "P5N32-SLI PREMIUM") || 2646 strstr(board_name, "P5N32-E SLI"))) { 2647 pci_info(dev, "Disabling MSI for MCP55 NIC on P5N32-SLI\n"); 2648 dev->no_msi = 1; 2649 } 2650 } 2651 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2652 PCI_DEVICE_ID_NVIDIA_NVENET_15, 2653 nvenet_msi_disable); 2654 2655 /* 2656 * PCIe spec r4.0 sec 7.7.1.2 and sec 7.7.2.2 say that if MSI/MSI-X is enabled, 2657 * then the device can't use INTx interrupts. Tegra's PCIe root ports don't 2658 * generate MSI interrupts for PME and AER events instead only INTx interrupts 2659 * are generated. Though Tegra's PCIe root ports can generate MSI interrupts 2660 * for other events, since PCIe specificiation doesn't support using a mix of 2661 * INTx and MSI/MSI-X, it is required to disable MSI interrupts to avoid port 2662 * service drivers registering their respective ISRs for MSIs. 2663 */ 2664 static void pci_quirk_nvidia_tegra_disable_rp_msi(struct pci_dev *dev) 2665 { 2666 dev->no_msi = 1; 2667 } 2668 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad0, 2669 PCI_CLASS_BRIDGE_PCI, 8, 2670 pci_quirk_nvidia_tegra_disable_rp_msi); 2671 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad1, 2672 PCI_CLASS_BRIDGE_PCI, 8, 2673 pci_quirk_nvidia_tegra_disable_rp_msi); 2674 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x1ad2, 2675 PCI_CLASS_BRIDGE_PCI, 8, 2676 pci_quirk_nvidia_tegra_disable_rp_msi); 2677 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf0, 2678 PCI_CLASS_BRIDGE_PCI, 8, 2679 pci_quirk_nvidia_tegra_disable_rp_msi); 2680 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0bf1, 2681 PCI_CLASS_BRIDGE_PCI, 8, 2682 pci_quirk_nvidia_tegra_disable_rp_msi); 2683 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1c, 2684 PCI_CLASS_BRIDGE_PCI, 8, 2685 pci_quirk_nvidia_tegra_disable_rp_msi); 2686 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e1d, 2687 PCI_CLASS_BRIDGE_PCI, 8, 2688 pci_quirk_nvidia_tegra_disable_rp_msi); 2689 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e12, 2690 PCI_CLASS_BRIDGE_PCI, 8, 2691 pci_quirk_nvidia_tegra_disable_rp_msi); 2692 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0e13, 2693 PCI_CLASS_BRIDGE_PCI, 8, 2694 pci_quirk_nvidia_tegra_disable_rp_msi); 2695 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0fae, 2696 PCI_CLASS_BRIDGE_PCI, 8, 2697 pci_quirk_nvidia_tegra_disable_rp_msi); 2698 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x0faf, 2699 PCI_CLASS_BRIDGE_PCI, 8, 2700 pci_quirk_nvidia_tegra_disable_rp_msi); 2701 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e5, 2702 PCI_CLASS_BRIDGE_PCI, 8, 2703 pci_quirk_nvidia_tegra_disable_rp_msi); 2704 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_NVIDIA, 0x10e6, 2705 PCI_CLASS_BRIDGE_PCI, 8, 2706 pci_quirk_nvidia_tegra_disable_rp_msi); 2707 2708 /* 2709 * Some versions of the MCP55 bridge from Nvidia have a legacy IRQ routing 2710 * config register. This register controls the routing of legacy 2711 * interrupts from devices that route through the MCP55. If this register 2712 * is misprogrammed, interrupts are only sent to the BSP, unlike 2713 * conventional systems where the IRQ is broadcast to all online CPUs. Not 2714 * having this register set properly prevents kdump from booting up 2715 * properly, so let's make sure that we have it set correctly. 2716 * Note that this is an undocumented register. 2717 */ 2718 static void nvbridge_check_legacy_irq_routing(struct pci_dev *dev) 2719 { 2720 u32 cfg; 2721 2722 if (!pci_find_capability(dev, PCI_CAP_ID_HT)) 2723 return; 2724 2725 pci_read_config_dword(dev, 0x74, &cfg); 2726 2727 if (cfg & ((1 << 2) | (1 << 15))) { 2728 pr_info("Rewriting IRQ routing register on MCP55\n"); 2729 cfg &= ~((1 << 2) | (1 << 15)); 2730 pci_write_config_dword(dev, 0x74, cfg); 2731 } 2732 } 2733 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2734 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V0, 2735 nvbridge_check_legacy_irq_routing); 2736 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, 2737 PCI_DEVICE_ID_NVIDIA_MCP55_BRIDGE_V4, 2738 nvbridge_check_legacy_irq_routing); 2739 2740 static int ht_check_msi_mapping(struct pci_dev *dev) 2741 { 2742 int pos, ttl = PCI_FIND_CAP_TTL; 2743 int found = 0; 2744 2745 /* Check if there is HT MSI cap or enabled on this device */ 2746 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2747 while (pos && ttl--) { 2748 u8 flags; 2749 2750 if (found < 1) 2751 found = 1; 2752 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2753 &flags) == 0) { 2754 if (flags & HT_MSI_FLAGS_ENABLE) { 2755 if (found < 2) { 2756 found = 2; 2757 break; 2758 } 2759 } 2760 } 2761 pos = pci_find_next_ht_capability(dev, pos, 2762 HT_CAPTYPE_MSI_MAPPING); 2763 } 2764 2765 return found; 2766 } 2767 2768 static int host_bridge_with_leaf(struct pci_dev *host_bridge) 2769 { 2770 struct pci_dev *dev; 2771 int pos; 2772 int i, dev_no; 2773 int found = 0; 2774 2775 dev_no = host_bridge->devfn >> 3; 2776 for (i = dev_no + 1; i < 0x20; i++) { 2777 dev = pci_get_slot(host_bridge->bus, PCI_DEVFN(i, 0)); 2778 if (!dev) 2779 continue; 2780 2781 /* found next host bridge? */ 2782 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2783 if (pos != 0) { 2784 pci_dev_put(dev); 2785 break; 2786 } 2787 2788 if (ht_check_msi_mapping(dev)) { 2789 found = 1; 2790 pci_dev_put(dev); 2791 break; 2792 } 2793 pci_dev_put(dev); 2794 } 2795 2796 return found; 2797 } 2798 2799 #define PCI_HT_CAP_SLAVE_CTRL0 4 /* link control */ 2800 #define PCI_HT_CAP_SLAVE_CTRL1 8 /* link control to */ 2801 2802 static int is_end_of_ht_chain(struct pci_dev *dev) 2803 { 2804 int pos, ctrl_off; 2805 int end = 0; 2806 u16 flags, ctrl; 2807 2808 pos = pci_find_ht_capability(dev, HT_CAPTYPE_SLAVE); 2809 2810 if (!pos) 2811 goto out; 2812 2813 pci_read_config_word(dev, pos + PCI_CAP_FLAGS, &flags); 2814 2815 ctrl_off = ((flags >> 10) & 1) ? 2816 PCI_HT_CAP_SLAVE_CTRL0 : PCI_HT_CAP_SLAVE_CTRL1; 2817 pci_read_config_word(dev, pos + ctrl_off, &ctrl); 2818 2819 if (ctrl & (1 << 6)) 2820 end = 1; 2821 2822 out: 2823 return end; 2824 } 2825 2826 static void nv_ht_enable_msi_mapping(struct pci_dev *dev) 2827 { 2828 struct pci_dev *host_bridge; 2829 int pos; 2830 int i, dev_no; 2831 int found = 0; 2832 2833 dev_no = dev->devfn >> 3; 2834 for (i = dev_no; i >= 0; i--) { 2835 host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); 2836 if (!host_bridge) 2837 continue; 2838 2839 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2840 if (pos != 0) { 2841 found = 1; 2842 break; 2843 } 2844 pci_dev_put(host_bridge); 2845 } 2846 2847 if (!found) 2848 return; 2849 2850 /* don't enable end_device/host_bridge with leaf directly here */ 2851 if (host_bridge == dev && is_end_of_ht_chain(host_bridge) && 2852 host_bridge_with_leaf(host_bridge)) 2853 goto out; 2854 2855 /* root did that ! */ 2856 if (msi_ht_cap_enabled(host_bridge)) 2857 goto out; 2858 2859 ht_enable_msi_mapping(dev); 2860 2861 out: 2862 pci_dev_put(host_bridge); 2863 } 2864 2865 static void ht_disable_msi_mapping(struct pci_dev *dev) 2866 { 2867 int pos, ttl = PCI_FIND_CAP_TTL; 2868 2869 pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); 2870 while (pos && ttl--) { 2871 u8 flags; 2872 2873 if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, 2874 &flags) == 0) { 2875 pci_info(dev, "Disabling HT MSI Mapping\n"); 2876 2877 pci_write_config_byte(dev, pos + HT_MSI_FLAGS, 2878 flags & ~HT_MSI_FLAGS_ENABLE); 2879 } 2880 pos = pci_find_next_ht_capability(dev, pos, 2881 HT_CAPTYPE_MSI_MAPPING); 2882 } 2883 } 2884 2885 static void __nv_msi_ht_cap_quirk(struct pci_dev *dev, int all) 2886 { 2887 struct pci_dev *host_bridge; 2888 int pos; 2889 int found; 2890 2891 if (!pci_msi_enabled()) 2892 return; 2893 2894 /* check if there is HT MSI cap or enabled on this device */ 2895 found = ht_check_msi_mapping(dev); 2896 2897 /* no HT MSI CAP */ 2898 if (found == 0) 2899 return; 2900 2901 /* 2902 * HT MSI mapping should be disabled on devices that are below 2903 * a non-Hypertransport host bridge. Locate the host bridge... 2904 */ 2905 host_bridge = pci_get_domain_bus_and_slot(pci_domain_nr(dev->bus), 0, 2906 PCI_DEVFN(0, 0)); 2907 if (host_bridge == NULL) { 2908 pci_warn(dev, "nv_msi_ht_cap_quirk didn't locate host bridge\n"); 2909 return; 2910 } 2911 2912 pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); 2913 if (pos != 0) { 2914 /* Host bridge is to HT */ 2915 if (found == 1) { 2916 /* it is not enabled, try to enable it */ 2917 if (all) 2918 ht_enable_msi_mapping(dev); 2919 else 2920 nv_ht_enable_msi_mapping(dev); 2921 } 2922 goto out; 2923 } 2924 2925 /* HT MSI is not enabled */ 2926 if (found == 1) 2927 goto out; 2928 2929 /* Host bridge is not to HT, disable HT MSI mapping on this device */ 2930 ht_disable_msi_mapping(dev); 2931 2932 out: 2933 pci_dev_put(host_bridge); 2934 } 2935 2936 static void nv_msi_ht_cap_quirk_all(struct pci_dev *dev) 2937 { 2938 return __nv_msi_ht_cap_quirk(dev, 1); 2939 } 2940 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2941 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk_all); 2942 2943 static void nv_msi_ht_cap_quirk_leaf(struct pci_dev *dev) 2944 { 2945 return __nv_msi_ht_cap_quirk(dev, 0); 2946 } 2947 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2948 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk_leaf); 2949 2950 static void quirk_msi_intx_disable_bug(struct pci_dev *dev) 2951 { 2952 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2953 } 2954 2955 static void quirk_msi_intx_disable_ati_bug(struct pci_dev *dev) 2956 { 2957 struct pci_dev *p; 2958 2959 /* 2960 * SB700 MSI issue will be fixed at HW level from revision A21; 2961 * we need check PCI REVISION ID of SMBus controller to get SB700 2962 * revision. 2963 */ 2964 p = pci_get_device(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS, 2965 NULL); 2966 if (!p) 2967 return; 2968 2969 if ((p->revision < 0x3B) && (p->revision >= 0x30)) 2970 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2971 pci_dev_put(p); 2972 } 2973 2974 static void quirk_msi_intx_disable_qca_bug(struct pci_dev *dev) 2975 { 2976 /* AR816X/AR817X/E210X MSI is fixed at HW level from revision 0x18 */ 2977 if (dev->revision < 0x18) { 2978 pci_info(dev, "set MSI_INTX_DISABLE_BUG flag\n"); 2979 dev->dev_flags |= PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG; 2980 } 2981 } 2982 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2983 PCI_DEVICE_ID_TIGON3_5780, 2984 quirk_msi_intx_disable_bug); 2985 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2986 PCI_DEVICE_ID_TIGON3_5780S, 2987 quirk_msi_intx_disable_bug); 2988 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2989 PCI_DEVICE_ID_TIGON3_5714, 2990 quirk_msi_intx_disable_bug); 2991 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2992 PCI_DEVICE_ID_TIGON3_5714S, 2993 quirk_msi_intx_disable_bug); 2994 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2995 PCI_DEVICE_ID_TIGON3_5715, 2996 quirk_msi_intx_disable_bug); 2997 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, 2998 PCI_DEVICE_ID_TIGON3_5715S, 2999 quirk_msi_intx_disable_bug); 3000 3001 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390, 3002 quirk_msi_intx_disable_ati_bug); 3003 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4391, 3004 quirk_msi_intx_disable_ati_bug); 3005 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4392, 3006 quirk_msi_intx_disable_ati_bug); 3007 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4393, 3008 quirk_msi_intx_disable_ati_bug); 3009 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4394, 3010 quirk_msi_intx_disable_ati_bug); 3011 3012 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4373, 3013 quirk_msi_intx_disable_bug); 3014 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4374, 3015 quirk_msi_intx_disable_bug); 3016 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375, 3017 quirk_msi_intx_disable_bug); 3018 3019 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1062, 3020 quirk_msi_intx_disable_bug); 3021 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1063, 3022 quirk_msi_intx_disable_bug); 3023 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2060, 3024 quirk_msi_intx_disable_bug); 3025 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x2062, 3026 quirk_msi_intx_disable_bug); 3027 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1073, 3028 quirk_msi_intx_disable_bug); 3029 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1083, 3030 quirk_msi_intx_disable_bug); 3031 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1090, 3032 quirk_msi_intx_disable_qca_bug); 3033 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x1091, 3034 quirk_msi_intx_disable_qca_bug); 3035 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a0, 3036 quirk_msi_intx_disable_qca_bug); 3037 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0x10a1, 3038 quirk_msi_intx_disable_qca_bug); 3039 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, 0xe091, 3040 quirk_msi_intx_disable_qca_bug); 3041 3042 /* 3043 * Amazon's Annapurna Labs 1c36:0031 Root Ports don't support MSI-X, so it 3044 * should be disabled on platforms where the device (mistakenly) advertises it. 3045 * 3046 * Notice that this quirk also disables MSI (which may work, but hasn't been 3047 * tested), since currently there is no standard way to disable only MSI-X. 3048 * 3049 * The 0031 device id is reused for other non Root Port device types, 3050 * therefore the quirk is registered for the PCI_CLASS_BRIDGE_PCI class. 3051 */ 3052 static void quirk_al_msi_disable(struct pci_dev *dev) 3053 { 3054 dev->no_msi = 1; 3055 pci_warn(dev, "Disabling MSI/MSI-X\n"); 3056 } 3057 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, 3058 PCI_CLASS_BRIDGE_PCI, 8, quirk_al_msi_disable); 3059 #endif /* CONFIG_PCI_MSI */ 3060 3061 /* 3062 * Allow manual resource allocation for PCI hotplug bridges via 3063 * pci=hpmemsize=nnM and pci=hpiosize=nnM parameters. For some PCI-PCI 3064 * hotplug bridges, like PLX 6254 (former HINT HB6), kernel fails to 3065 * allocate resources when hotplug device is inserted and PCI bus is 3066 * rescanned. 3067 */ 3068 static void quirk_hotplug_bridge(struct pci_dev *dev) 3069 { 3070 dev->is_hotplug_bridge = 1; 3071 } 3072 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge); 3073 3074 /* 3075 * This is a quirk for the Ricoh MMC controller found as a part of some 3076 * multifunction chips. 3077 * 3078 * This is very similar and based on the ricoh_mmc driver written by 3079 * Philip Langdale. Thank you for these magic sequences. 3080 * 3081 * These chips implement the four main memory card controllers (SD, MMC, 3082 * MS, xD) and one or both of CardBus or FireWire. 3083 * 3084 * It happens that they implement SD and MMC support as separate 3085 * controllers (and PCI functions). The Linux SDHCI driver supports MMC 3086 * cards but the chip detects MMC cards in hardware and directs them to the 3087 * MMC controller - so the SDHCI driver never sees them. 3088 * 3089 * To get around this, we must disable the useless MMC controller. At that 3090 * point, the SDHCI controller will start seeing them. It seems to be the 3091 * case that the relevant PCI registers to deactivate the MMC controller 3092 * live on PCI function 0, which might be the CardBus controller or the 3093 * FireWire controller, depending on the particular chip in question 3094 * 3095 * This has to be done early, because as soon as we disable the MMC controller 3096 * other PCI functions shift up one level, e.g. function #2 becomes function 3097 * #1, and this will confuse the PCI core. 3098 */ 3099 #ifdef CONFIG_MMC_RICOH_MMC 3100 static void ricoh_mmc_fixup_rl5c476(struct pci_dev *dev) 3101 { 3102 u8 write_enable; 3103 u8 write_target; 3104 u8 disable; 3105 3106 /* 3107 * Disable via CardBus interface 3108 * 3109 * This must be done via function #0 3110 */ 3111 if (PCI_FUNC(dev->devfn)) 3112 return; 3113 3114 pci_read_config_byte(dev, 0xB7, &disable); 3115 if (disable & 0x02) 3116 return; 3117 3118 pci_read_config_byte(dev, 0x8E, &write_enable); 3119 pci_write_config_byte(dev, 0x8E, 0xAA); 3120 pci_read_config_byte(dev, 0x8D, &write_target); 3121 pci_write_config_byte(dev, 0x8D, 0xB7); 3122 pci_write_config_byte(dev, 0xB7, disable | 0x02); 3123 pci_write_config_byte(dev, 0x8E, write_enable); 3124 pci_write_config_byte(dev, 0x8D, write_target); 3125 3126 pci_notice(dev, "proprietary Ricoh MMC controller disabled (via CardBus function)\n"); 3127 pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n"); 3128 } 3129 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 3130 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476, ricoh_mmc_fixup_rl5c476); 3131 3132 static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) 3133 { 3134 u8 write_enable; 3135 u8 disable; 3136 3137 /* 3138 * Disable via FireWire interface 3139 * 3140 * This must be done via function #0 3141 */ 3142 if (PCI_FUNC(dev->devfn)) 3143 return; 3144 /* 3145 * RICOH 0xe822 and 0xe823 SD/MMC card readers fail to recognize 3146 * certain types of SD/MMC cards. Lowering the SD base clock 3147 * frequency from 200Mhz to 50Mhz fixes this issue. 3148 * 3149 * 0x150 - SD2.0 mode enable for changing base clock 3150 * frequency to 50Mhz 3151 * 0xe1 - Base clock frequency 3152 * 0x32 - 50Mhz new clock frequency 3153 * 0xf9 - Key register for 0x150 3154 * 0xfc - key register for 0xe1 3155 */ 3156 if (dev->device == PCI_DEVICE_ID_RICOH_R5CE822 || 3157 dev->device == PCI_DEVICE_ID_RICOH_R5CE823) { 3158 pci_write_config_byte(dev, 0xf9, 0xfc); 3159 pci_write_config_byte(dev, 0x150, 0x10); 3160 pci_write_config_byte(dev, 0xf9, 0x00); 3161 pci_write_config_byte(dev, 0xfc, 0x01); 3162 pci_write_config_byte(dev, 0xe1, 0x32); 3163 pci_write_config_byte(dev, 0xfc, 0x00); 3164 3165 pci_notice(dev, "MMC controller base frequency changed to 50Mhz.\n"); 3166 } 3167 3168 pci_read_config_byte(dev, 0xCB, &disable); 3169 3170 if (disable & 0x02) 3171 return; 3172 3173 pci_read_config_byte(dev, 0xCA, &write_enable); 3174 pci_write_config_byte(dev, 0xCA, 0x57); 3175 pci_write_config_byte(dev, 0xCB, disable | 0x02); 3176 pci_write_config_byte(dev, 0xCA, write_enable); 3177 3178 pci_notice(dev, "proprietary Ricoh MMC controller disabled (via FireWire function)\n"); 3179 pci_notice(dev, "MMC cards are now supported by standard SDHCI controller\n"); 3180 3181 } 3182 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 3183 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); 3184 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 3185 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE822, ricoh_mmc_fixup_r5c832); 3186 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 3187 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5CE823, ricoh_mmc_fixup_r5c832); 3188 #endif /*CONFIG_MMC_RICOH_MMC*/ 3189 3190 #ifdef CONFIG_DMAR_TABLE 3191 #define VTUNCERRMSK_REG 0x1ac 3192 #define VTD_MSK_SPEC_ERRORS (1 << 31) 3193 /* 3194 * This is a quirk for masking VT-d spec-defined errors to platform error 3195 * handling logic. Without this, platforms using Intel 7500, 5500 chipsets 3196 * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based 3197 * on the RAS config settings of the platform) when a VT-d fault happens. 3198 * The resulting SMI caused the system to hang. 3199 * 3200 * VT-d spec-related errors are already handled by the VT-d OS code, so no 3201 * need to report the same error through other channels. 3202 */ 3203 static void vtd_mask_spec_errors(struct pci_dev *dev) 3204 { 3205 u32 word; 3206 3207 pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); 3208 pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); 3209 } 3210 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); 3211 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); 3212 #endif 3213 3214 static void fixup_ti816x_class(struct pci_dev *dev) 3215 { 3216 u32 class = dev->class; 3217 3218 /* TI 816x devices do not have class code set when in PCIe boot mode */ 3219 dev->class = PCI_CLASS_MULTIMEDIA_VIDEO << 8; 3220 pci_info(dev, "PCI class overridden (%#08x -> %#08x)\n", 3221 class, dev->class); 3222 } 3223 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_TI, 0xb800, 3224 PCI_CLASS_NOT_DEFINED, 8, fixup_ti816x_class); 3225 3226 /* 3227 * Some PCIe devices do not work reliably with the claimed maximum 3228 * payload size supported. 3229 */ 3230 static void fixup_mpss_256(struct pci_dev *dev) 3231 { 3232 dev->pcie_mpss = 1; /* 256 bytes */ 3233 } 3234 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 3235 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256); 3236 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 3237 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256); 3238 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE, 3239 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256); 3240 3241 /* 3242 * Intel 5000 and 5100 Memory controllers have an erratum with read completion 3243 * coalescing (which is enabled by default on some BIOSes) and MPS of 256B. 3244 * Since there is no way of knowing what the PCIe MPS on each fabric will be 3245 * until all of the devices are discovered and buses walked, read completion 3246 * coalescing must be disabled. Unfortunately, it cannot be re-enabled because 3247 * it is possible to hotplug a device with MPS of 256B. 3248 */ 3249 static void quirk_intel_mc_errata(struct pci_dev *dev) 3250 { 3251 int err; 3252 u16 rcc; 3253 3254 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 3255 pcie_bus_config == PCIE_BUS_DEFAULT) 3256 return; 3257 3258 /* 3259 * Intel erratum specifies bits to change but does not say what 3260 * they are. Keeping them magical until such time as the registers 3261 * and values can be explained. 3262 */ 3263 err = pci_read_config_word(dev, 0x48, &rcc); 3264 if (err) { 3265 pci_err(dev, "Error attempting to read the read completion coalescing register\n"); 3266 return; 3267 } 3268 3269 if (!(rcc & (1 << 10))) 3270 return; 3271 3272 rcc &= ~(1 << 10); 3273 3274 err = pci_write_config_word(dev, 0x48, rcc); 3275 if (err) { 3276 pci_err(dev, "Error attempting to write the read completion coalescing register\n"); 3277 return; 3278 } 3279 3280 pr_info_once("Read completion coalescing disabled due to hardware erratum relating to 256B MPS\n"); 3281 } 3282 /* Intel 5000 series memory controllers and ports 2-7 */ 3283 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25c0, quirk_intel_mc_errata); 3284 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d0, quirk_intel_mc_errata); 3285 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d4, quirk_intel_mc_errata); 3286 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25d8, quirk_intel_mc_errata); 3287 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e2, quirk_intel_mc_errata); 3288 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e3, quirk_intel_mc_errata); 3289 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e4, quirk_intel_mc_errata); 3290 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e5, quirk_intel_mc_errata); 3291 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e6, quirk_intel_mc_errata); 3292 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25e7, quirk_intel_mc_errata); 3293 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f7, quirk_intel_mc_errata); 3294 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f8, quirk_intel_mc_errata); 3295 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25f9, quirk_intel_mc_errata); 3296 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x25fa, quirk_intel_mc_errata); 3297 /* Intel 5100 series memory controllers and ports 2-7 */ 3298 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65c0, quirk_intel_mc_errata); 3299 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e2, quirk_intel_mc_errata); 3300 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e3, quirk_intel_mc_errata); 3301 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e4, quirk_intel_mc_errata); 3302 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e5, quirk_intel_mc_errata); 3303 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e6, quirk_intel_mc_errata); 3304 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65e7, quirk_intel_mc_errata); 3305 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f7, quirk_intel_mc_errata); 3306 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f8, quirk_intel_mc_errata); 3307 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); 3308 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); 3309 3310 /* 3311 * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. 3312 * To work around this, query the size it should be configured to by the 3313 * device and modify the resource end to correspond to this new size. 3314 */ 3315 static void quirk_intel_ntb(struct pci_dev *dev) 3316 { 3317 int rc; 3318 u8 val; 3319 3320 rc = pci_read_config_byte(dev, 0x00D0, &val); 3321 if (rc) 3322 return; 3323 3324 dev->resource[2].end = dev->resource[2].start + ((u64) 1 << val) - 1; 3325 3326 rc = pci_read_config_byte(dev, 0x00D1, &val); 3327 if (rc) 3328 return; 3329 3330 dev->resource[4].end = dev->resource[4].start + ((u64) 1 << val) - 1; 3331 } 3332 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb); 3333 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb); 3334 3335 /* 3336 * Some BIOS implementations leave the Intel GPU interrupts enabled, even 3337 * though no one is handling them (e.g., if the i915 driver is never 3338 * loaded). Additionally the interrupt destination is not set up properly 3339 * and the interrupt ends up -somewhere-. 3340 * 3341 * These spurious interrupts are "sticky" and the kernel disables the 3342 * (shared) interrupt line after 100,000+ generated interrupts. 3343 * 3344 * Fix it by disabling the still enabled interrupts. This resolves crashes 3345 * often seen on monitor unplug. 3346 */ 3347 #define I915_DEIER_REG 0x4400c 3348 static void disable_igfx_irq(struct pci_dev *dev) 3349 { 3350 void __iomem *regs = pci_iomap(dev, 0, 0); 3351 if (regs == NULL) { 3352 pci_warn(dev, "igfx quirk: Can't iomap PCI device\n"); 3353 return; 3354 } 3355 3356 /* Check if any interrupt line is still enabled */ 3357 if (readl(regs + I915_DEIER_REG) != 0) { 3358 pci_warn(dev, "BIOS left Intel GPU interrupts enabled; disabling\n"); 3359 3360 writel(0, regs + I915_DEIER_REG); 3361 } 3362 3363 pci_iounmap(dev, regs); 3364 } 3365 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0042, disable_igfx_irq); 3366 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0046, disable_igfx_irq); 3367 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x004a, disable_igfx_irq); 3368 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0102, disable_igfx_irq); 3369 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0106, disable_igfx_irq); 3370 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); 3371 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); 3372 3373 /* 3374 * PCI devices which are on Intel chips can skip the 10ms delay 3375 * before entering D3 mode. 3376 */ 3377 static void quirk_remove_d3_delay(struct pci_dev *dev) 3378 { 3379 dev->d3_delay = 0; 3380 } 3381 /* C600 Series devices do not need 10ms d3_delay */ 3382 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0412, quirk_remove_d3_delay); 3383 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c00, quirk_remove_d3_delay); 3384 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0c0c, quirk_remove_d3_delay); 3385 /* Lynxpoint-H PCH devices do not need 10ms d3_delay */ 3386 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c02, quirk_remove_d3_delay); 3387 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c18, quirk_remove_d3_delay); 3388 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c1c, quirk_remove_d3_delay); 3389 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c20, quirk_remove_d3_delay); 3390 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c22, quirk_remove_d3_delay); 3391 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c26, quirk_remove_d3_delay); 3392 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c2d, quirk_remove_d3_delay); 3393 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c31, quirk_remove_d3_delay); 3394 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3a, quirk_remove_d3_delay); 3395 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c3d, quirk_remove_d3_delay); 3396 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x8c4e, quirk_remove_d3_delay); 3397 /* Intel Cherrytrail devices do not need 10ms d3_delay */ 3398 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2280, quirk_remove_d3_delay); 3399 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x2298, quirk_remove_d3_delay); 3400 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x229c, quirk_remove_d3_delay); 3401 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b0, quirk_remove_d3_delay); 3402 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b5, quirk_remove_d3_delay); 3403 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b7, quirk_remove_d3_delay); 3404 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22b8, quirk_remove_d3_delay); 3405 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22d8, quirk_remove_d3_delay); 3406 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x22dc, quirk_remove_d3_delay); 3407 3408 /* 3409 * Some devices may pass our check in pci_intx_mask_supported() if 3410 * PCI_COMMAND_INTX_DISABLE works though they actually do not properly 3411 * support this feature. 3412 */ 3413 static void quirk_broken_intx_masking(struct pci_dev *dev) 3414 { 3415 dev->broken_intx_masking = 1; 3416 } 3417 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, 0x0030, 3418 quirk_broken_intx_masking); 3419 DECLARE_PCI_FIXUP_FINAL(0x1814, 0x0601, /* Ralink RT2800 802.11n PCI */ 3420 quirk_broken_intx_masking); 3421 DECLARE_PCI_FIXUP_FINAL(0x1b7c, 0x0004, /* Ceton InfiniTV4 */ 3422 quirk_broken_intx_masking); 3423 3424 /* 3425 * Realtek RTL8169 PCI Gigabit Ethernet Controller (rev 10) 3426 * Subsystem: Realtek RTL8169/8110 Family PCI Gigabit Ethernet NIC 3427 * 3428 * RTL8110SC - Fails under PCI device assignment using DisINTx masking. 3429 */ 3430 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_REALTEK, 0x8169, 3431 quirk_broken_intx_masking); 3432 3433 /* 3434 * Intel i40e (XL710/X710) 10/20/40GbE NICs all have broken INTx masking, 3435 * DisINTx can be set but the interrupt status bit is non-functional. 3436 */ 3437 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1572, quirk_broken_intx_masking); 3438 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1574, quirk_broken_intx_masking); 3439 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1580, quirk_broken_intx_masking); 3440 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1581, quirk_broken_intx_masking); 3441 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1583, quirk_broken_intx_masking); 3442 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1584, quirk_broken_intx_masking); 3443 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1585, quirk_broken_intx_masking); 3444 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1586, quirk_broken_intx_masking); 3445 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1587, quirk_broken_intx_masking); 3446 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1588, quirk_broken_intx_masking); 3447 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1589, quirk_broken_intx_masking); 3448 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158a, quirk_broken_intx_masking); 3449 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x158b, quirk_broken_intx_masking); 3450 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d0, quirk_broken_intx_masking); 3451 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d1, quirk_broken_intx_masking); 3452 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x37d2, quirk_broken_intx_masking); 3453 3454 static u16 mellanox_broken_intx_devs[] = { 3455 PCI_DEVICE_ID_MELLANOX_HERMON_SDR, 3456 PCI_DEVICE_ID_MELLANOX_HERMON_DDR, 3457 PCI_DEVICE_ID_MELLANOX_HERMON_QDR, 3458 PCI_DEVICE_ID_MELLANOX_HERMON_DDR_GEN2, 3459 PCI_DEVICE_ID_MELLANOX_HERMON_QDR_GEN2, 3460 PCI_DEVICE_ID_MELLANOX_HERMON_EN, 3461 PCI_DEVICE_ID_MELLANOX_HERMON_EN_GEN2, 3462 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN, 3463 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_T_GEN2, 3464 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_GEN2, 3465 PCI_DEVICE_ID_MELLANOX_CONNECTX_EN_5_GEN2, 3466 PCI_DEVICE_ID_MELLANOX_CONNECTX2, 3467 PCI_DEVICE_ID_MELLANOX_CONNECTX3, 3468 PCI_DEVICE_ID_MELLANOX_CONNECTX3_PRO, 3469 }; 3470 3471 #define CONNECTX_4_CURR_MAX_MINOR 99 3472 #define CONNECTX_4_INTX_SUPPORT_MINOR 14 3473 3474 /* 3475 * Check ConnectX-4/LX FW version to see if it supports legacy interrupts. 3476 * If so, don't mark it as broken. 3477 * FW minor > 99 means older FW version format and no INTx masking support. 3478 * FW minor < 14 means new FW version format and no INTx masking support. 3479 */ 3480 static void mellanox_check_broken_intx_masking(struct pci_dev *pdev) 3481 { 3482 __be32 __iomem *fw_ver; 3483 u16 fw_major; 3484 u16 fw_minor; 3485 u16 fw_subminor; 3486 u32 fw_maj_min; 3487 u32 fw_sub_min; 3488 int i; 3489 3490 for (i = 0; i < ARRAY_SIZE(mellanox_broken_intx_devs); i++) { 3491 if (pdev->device == mellanox_broken_intx_devs[i]) { 3492 pdev->broken_intx_masking = 1; 3493 return; 3494 } 3495 } 3496 3497 /* 3498 * Getting here means Connect-IB cards and up. Connect-IB has no INTx 3499 * support so shouldn't be checked further 3500 */ 3501 if (pdev->device == PCI_DEVICE_ID_MELLANOX_CONNECTIB) 3502 return; 3503 3504 if (pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4 && 3505 pdev->device != PCI_DEVICE_ID_MELLANOX_CONNECTX4_LX) 3506 return; 3507 3508 /* For ConnectX-4 and ConnectX-4LX, need to check FW support */ 3509 if (pci_enable_device_mem(pdev)) { 3510 pci_warn(pdev, "Can't enable device memory\n"); 3511 return; 3512 } 3513 3514 fw_ver = ioremap(pci_resource_start(pdev, 0), 4); 3515 if (!fw_ver) { 3516 pci_warn(pdev, "Can't map ConnectX-4 initialization segment\n"); 3517 goto out; 3518 } 3519 3520 /* Reading from resource space should be 32b aligned */ 3521 fw_maj_min = ioread32be(fw_ver); 3522 fw_sub_min = ioread32be(fw_ver + 1); 3523 fw_major = fw_maj_min & 0xffff; 3524 fw_minor = fw_maj_min >> 16; 3525 fw_subminor = fw_sub_min & 0xffff; 3526 if (fw_minor > CONNECTX_4_CURR_MAX_MINOR || 3527 fw_minor < CONNECTX_4_INTX_SUPPORT_MINOR) { 3528 pci_warn(pdev, "ConnectX-4: FW %u.%u.%u doesn't support INTx masking, disabling. Please upgrade FW to %d.14.1100 and up for INTx support\n", 3529 fw_major, fw_minor, fw_subminor, pdev->device == 3530 PCI_DEVICE_ID_MELLANOX_CONNECTX4 ? 12 : 14); 3531 pdev->broken_intx_masking = 1; 3532 } 3533 3534 iounmap(fw_ver); 3535 3536 out: 3537 pci_disable_device(pdev); 3538 } 3539 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID, 3540 mellanox_check_broken_intx_masking); 3541 3542 static void quirk_no_bus_reset(struct pci_dev *dev) 3543 { 3544 dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET; 3545 } 3546 3547 /* 3548 * Some Atheros AR9xxx and QCA988x chips do not behave after a bus reset. 3549 * The device will throw a Link Down error on AER-capable systems and 3550 * regardless of AER, config space of the device is never accessible again 3551 * and typically causes the system to hang or reset when access is attempted. 3552 * http://www.spinics.net/lists/linux-pci/msg34797.html 3553 */ 3554 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset); 3555 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0032, quirk_no_bus_reset); 3556 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003c, quirk_no_bus_reset); 3557 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0033, quirk_no_bus_reset); 3558 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0034, quirk_no_bus_reset); 3559 3560 /* 3561 * Root port on some Cavium CN8xxx chips do not successfully complete a bus 3562 * reset when used with certain child devices. After the reset, config 3563 * accesses to the child may fail. 3564 */ 3565 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset); 3566 3567 static void quirk_no_pm_reset(struct pci_dev *dev) 3568 { 3569 /* 3570 * We can't do a bus reset on root bus devices, but an ineffective 3571 * PM reset may be better than nothing. 3572 */ 3573 if (!pci_is_root_bus(dev->bus)) 3574 dev->dev_flags |= PCI_DEV_FLAGS_NO_PM_RESET; 3575 } 3576 3577 /* 3578 * Some AMD/ATI GPUS (HD8570 - Oland) report that a D3hot->D0 transition 3579 * causes a reset (i.e., they advertise NoSoftRst-). This transition seems 3580 * to have no effect on the device: it retains the framebuffer contents and 3581 * monitor sync. Advertising this support makes other layers, like VFIO, 3582 * assume pci_reset_function() is viable for this device. Mark it as 3583 * unavailable to skip it when testing reset methods. 3584 */ 3585 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 3586 PCI_CLASS_DISPLAY_VGA, 8, quirk_no_pm_reset); 3587 3588 /* 3589 * Thunderbolt controllers with broken MSI hotplug signaling: 3590 * Entire 1st generation (Light Ridge, Eagle Ridge, Light Peak) and part 3591 * of the 2nd generation (Cactus Ridge 4C up to revision 1, Port Ridge). 3592 */ 3593 static void quirk_thunderbolt_hotplug_msi(struct pci_dev *pdev) 3594 { 3595 if (pdev->is_hotplug_bridge && 3596 (pdev->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C || 3597 pdev->revision <= 1)) 3598 pdev->no_msi = 1; 3599 } 3600 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3601 quirk_thunderbolt_hotplug_msi); 3602 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_EAGLE_RIDGE, 3603 quirk_thunderbolt_hotplug_msi); 3604 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LIGHT_PEAK, 3605 quirk_thunderbolt_hotplug_msi); 3606 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3607 quirk_thunderbolt_hotplug_msi); 3608 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PORT_RIDGE, 3609 quirk_thunderbolt_hotplug_msi); 3610 3611 #ifdef CONFIG_ACPI 3612 /* 3613 * Apple: Shutdown Cactus Ridge Thunderbolt controller. 3614 * 3615 * On Apple hardware the Cactus Ridge Thunderbolt controller needs to be 3616 * shutdown before suspend. Otherwise the native host interface (NHI) will not 3617 * be present after resume if a device was plugged in before suspend. 3618 * 3619 * The Thunderbolt controller consists of a PCIe switch with downstream 3620 * bridges leading to the NHI and to the tunnel PCI bridges. 3621 * 3622 * This quirk cuts power to the whole chip. Therefore we have to apply it 3623 * during suspend_noirq of the upstream bridge. 3624 * 3625 * Power is automagically restored before resume. No action is needed. 3626 */ 3627 static void quirk_apple_poweroff_thunderbolt(struct pci_dev *dev) 3628 { 3629 acpi_handle bridge, SXIO, SXFP, SXLV; 3630 3631 if (!x86_apple_machine) 3632 return; 3633 if (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM) 3634 return; 3635 bridge = ACPI_HANDLE(&dev->dev); 3636 if (!bridge) 3637 return; 3638 3639 /* 3640 * SXIO and SXLV are present only on machines requiring this quirk. 3641 * Thunderbolt bridges in external devices might have the same 3642 * device ID as those on the host, but they will not have the 3643 * associated ACPI methods. This implicitly checks that we are at 3644 * the right bridge. 3645 */ 3646 if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO)) 3647 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP", &SXFP)) 3648 || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV", &SXLV))) 3649 return; 3650 pci_info(dev, "quirk: cutting power to Thunderbolt controller...\n"); 3651 3652 /* magic sequence */ 3653 acpi_execute_simple_method(SXIO, NULL, 1); 3654 acpi_execute_simple_method(SXFP, NULL, 0); 3655 msleep(300); 3656 acpi_execute_simple_method(SXLV, NULL, 0); 3657 acpi_execute_simple_method(SXIO, NULL, 0); 3658 acpi_execute_simple_method(SXLV, NULL, 0); 3659 } 3660 DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL, 3661 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3662 quirk_apple_poweroff_thunderbolt); 3663 3664 /* 3665 * Apple: Wait for the Thunderbolt controller to reestablish PCI tunnels 3666 * 3667 * During suspend the Thunderbolt controller is reset and all PCI 3668 * tunnels are lost. The NHI driver will try to reestablish all tunnels 3669 * during resume. We have to manually wait for the NHI since there is 3670 * no parent child relationship between the NHI and the tunneled 3671 * bridges. 3672 */ 3673 static void quirk_apple_wait_for_thunderbolt(struct pci_dev *dev) 3674 { 3675 struct pci_dev *sibling = NULL; 3676 struct pci_dev *nhi = NULL; 3677 3678 if (!x86_apple_machine) 3679 return; 3680 if (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM) 3681 return; 3682 3683 /* 3684 * Find the NHI and confirm that we are a bridge on the Thunderbolt 3685 * host controller and not on a Thunderbolt endpoint. 3686 */ 3687 sibling = pci_get_slot(dev->bus, 0x0); 3688 if (sibling == dev) 3689 goto out; /* we are the downstream bridge to the NHI */ 3690 if (!sibling || !sibling->subordinate) 3691 goto out; 3692 nhi = pci_get_slot(sibling->subordinate, 0x0); 3693 if (!nhi) 3694 goto out; 3695 if (nhi->vendor != PCI_VENDOR_ID_INTEL 3696 || (nhi->device != PCI_DEVICE_ID_INTEL_LIGHT_RIDGE && 3697 nhi->device != PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C && 3698 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI && 3699 nhi->device != PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI) 3700 || nhi->class != PCI_CLASS_SYSTEM_OTHER << 8) 3701 goto out; 3702 pci_info(dev, "quirk: waiting for Thunderbolt to reestablish PCI tunnels...\n"); 3703 device_pm_wait_for_dev(&dev->dev, &nhi->dev); 3704 out: 3705 pci_dev_put(nhi); 3706 pci_dev_put(sibling); 3707 } 3708 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3709 PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, 3710 quirk_apple_wait_for_thunderbolt); 3711 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3712 PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, 3713 quirk_apple_wait_for_thunderbolt); 3714 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3715 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_BRIDGE, 3716 quirk_apple_wait_for_thunderbolt); 3717 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_INTEL, 3718 PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_BRIDGE, 3719 quirk_apple_wait_for_thunderbolt); 3720 #endif 3721 3722 /* 3723 * Following are device-specific reset methods which can be used to 3724 * reset a single function if other methods (e.g. FLR, PM D0->D3) are 3725 * not available. 3726 */ 3727 static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe) 3728 { 3729 /* 3730 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf 3731 * 3732 * The 82599 supports FLR on VFs, but FLR support is reported only 3733 * in the PF DEVCAP (sec 9.3.10.4), not in the VF DEVCAP (sec 9.5). 3734 * Thus we must call pcie_flr() directly without first checking if it is 3735 * supported. 3736 */ 3737 if (!probe) 3738 pcie_flr(dev); 3739 return 0; 3740 } 3741 3742 #define SOUTH_CHICKEN2 0xc2004 3743 #define PCH_PP_STATUS 0xc7200 3744 #define PCH_PP_CONTROL 0xc7204 3745 #define MSG_CTL 0x45010 3746 #define NSDE_PWR_STATE 0xd0100 3747 #define IGD_OPERATION_TIMEOUT 10000 /* set timeout 10 seconds */ 3748 3749 static int reset_ivb_igd(struct pci_dev *dev, int probe) 3750 { 3751 void __iomem *mmio_base; 3752 unsigned long timeout; 3753 u32 val; 3754 3755 if (probe) 3756 return 0; 3757 3758 mmio_base = pci_iomap(dev, 0, 0); 3759 if (!mmio_base) 3760 return -ENOMEM; 3761 3762 iowrite32(0x00000002, mmio_base + MSG_CTL); 3763 3764 /* 3765 * Clobbering SOUTH_CHICKEN2 register is fine only if the next 3766 * driver loaded sets the right bits. However, this's a reset and 3767 * the bits have been set by i915 previously, so we clobber 3768 * SOUTH_CHICKEN2 register directly here. 3769 */ 3770 iowrite32(0x00000005, mmio_base + SOUTH_CHICKEN2); 3771 3772 val = ioread32(mmio_base + PCH_PP_CONTROL) & 0xfffffffe; 3773 iowrite32(val, mmio_base + PCH_PP_CONTROL); 3774 3775 timeout = jiffies + msecs_to_jiffies(IGD_OPERATION_TIMEOUT); 3776 do { 3777 val = ioread32(mmio_base + PCH_PP_STATUS); 3778 if ((val & 0xb0000000) == 0) 3779 goto reset_complete; 3780 msleep(10); 3781 } while (time_before(jiffies, timeout)); 3782 pci_warn(dev, "timeout during reset\n"); 3783 3784 reset_complete: 3785 iowrite32(0x00000002, mmio_base + NSDE_PWR_STATE); 3786 3787 pci_iounmap(dev, mmio_base); 3788 return 0; 3789 } 3790 3791 /* Device-specific reset method for Chelsio T4-based adapters */ 3792 static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe) 3793 { 3794 u16 old_command; 3795 u16 msix_flags; 3796 3797 /* 3798 * If this isn't a Chelsio T4-based device, return -ENOTTY indicating 3799 * that we have no device-specific reset method. 3800 */ 3801 if ((dev->device & 0xf000) != 0x4000) 3802 return -ENOTTY; 3803 3804 /* 3805 * If this is the "probe" phase, return 0 indicating that we can 3806 * reset this device. 3807 */ 3808 if (probe) 3809 return 0; 3810 3811 /* 3812 * T4 can wedge if there are DMAs in flight within the chip and Bus 3813 * Master has been disabled. We need to have it on till the Function 3814 * Level Reset completes. (BUS_MASTER is disabled in 3815 * pci_reset_function()). 3816 */ 3817 pci_read_config_word(dev, PCI_COMMAND, &old_command); 3818 pci_write_config_word(dev, PCI_COMMAND, 3819 old_command | PCI_COMMAND_MASTER); 3820 3821 /* 3822 * Perform the actual device function reset, saving and restoring 3823 * configuration information around the reset. 3824 */ 3825 pci_save_state(dev); 3826 3827 /* 3828 * T4 also suffers a Head-Of-Line blocking problem if MSI-X interrupts 3829 * are disabled when an MSI-X interrupt message needs to be delivered. 3830 * So we briefly re-enable MSI-X interrupts for the duration of the 3831 * FLR. The pci_restore_state() below will restore the original 3832 * MSI-X state. 3833 */ 3834 pci_read_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, &msix_flags); 3835 if ((msix_flags & PCI_MSIX_FLAGS_ENABLE) == 0) 3836 pci_write_config_word(dev, dev->msix_cap+PCI_MSIX_FLAGS, 3837 msix_flags | 3838 PCI_MSIX_FLAGS_ENABLE | 3839 PCI_MSIX_FLAGS_MASKALL); 3840 3841 pcie_flr(dev); 3842 3843 /* 3844 * Restore the configuration information (BAR values, etc.) including 3845 * the original PCI Configuration Space Command word, and return 3846 * success. 3847 */ 3848 pci_restore_state(dev); 3849 pci_write_config_word(dev, PCI_COMMAND, old_command); 3850 return 0; 3851 } 3852 3853 #define PCI_DEVICE_ID_INTEL_82599_SFP_VF 0x10ed 3854 #define PCI_DEVICE_ID_INTEL_IVB_M_VGA 0x0156 3855 #define PCI_DEVICE_ID_INTEL_IVB_M2_VGA 0x0166 3856 3857 /* 3858 * The Samsung SM961/PM961 controller can sometimes enter a fatal state after 3859 * FLR where config space reads from the device return -1. We seem to be 3860 * able to avoid this condition if we disable the NVMe controller prior to 3861 * FLR. This quirk is generic for any NVMe class device requiring similar 3862 * assistance to quiesce the device prior to FLR. 3863 * 3864 * NVMe specification: https://nvmexpress.org/resources/specifications/ 3865 * Revision 1.0e: 3866 * Chapter 2: Required and optional PCI config registers 3867 * Chapter 3: NVMe control registers 3868 * Chapter 7.3: Reset behavior 3869 */ 3870 static int nvme_disable_and_flr(struct pci_dev *dev, int probe) 3871 { 3872 void __iomem *bar; 3873 u16 cmd; 3874 u32 cfg; 3875 3876 if (dev->class != PCI_CLASS_STORAGE_EXPRESS || 3877 !pcie_has_flr(dev) || !pci_resource_start(dev, 0)) 3878 return -ENOTTY; 3879 3880 if (probe) 3881 return 0; 3882 3883 bar = pci_iomap(dev, 0, NVME_REG_CC + sizeof(cfg)); 3884 if (!bar) 3885 return -ENOTTY; 3886 3887 pci_read_config_word(dev, PCI_COMMAND, &cmd); 3888 pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MEMORY); 3889 3890 cfg = readl(bar + NVME_REG_CC); 3891 3892 /* Disable controller if enabled */ 3893 if (cfg & NVME_CC_ENABLE) { 3894 u32 cap = readl(bar + NVME_REG_CAP); 3895 unsigned long timeout; 3896 3897 /* 3898 * Per nvme_disable_ctrl() skip shutdown notification as it 3899 * could complete commands to the admin queue. We only intend 3900 * to quiesce the device before reset. 3901 */ 3902 cfg &= ~(NVME_CC_SHN_MASK | NVME_CC_ENABLE); 3903 3904 writel(cfg, bar + NVME_REG_CC); 3905 3906 /* 3907 * Some controllers require an additional delay here, see 3908 * NVME_QUIRK_DELAY_BEFORE_CHK_RDY. None of those are yet 3909 * supported by this quirk. 3910 */ 3911 3912 /* Cap register provides max timeout in 500ms increments */ 3913 timeout = ((NVME_CAP_TIMEOUT(cap) + 1) * HZ / 2) + jiffies; 3914 3915 for (;;) { 3916 u32 status = readl(bar + NVME_REG_CSTS); 3917 3918 /* Ready status becomes zero on disable complete */ 3919 if (!(status & NVME_CSTS_RDY)) 3920 break; 3921 3922 msleep(100); 3923 3924 if (time_after(jiffies, timeout)) { 3925 pci_warn(dev, "Timeout waiting for NVMe ready status to clear after disable\n"); 3926 break; 3927 } 3928 } 3929 } 3930 3931 pci_iounmap(dev, bar); 3932 3933 pcie_flr(dev); 3934 3935 return 0; 3936 } 3937 3938 /* 3939 * Intel DC P3700 NVMe controller will timeout waiting for ready status 3940 * to change after NVMe enable if the driver starts interacting with the 3941 * device too soon after FLR. A 250ms delay after FLR has heuristically 3942 * proven to produce reliably working results for device assignment cases. 3943 */ 3944 static int delay_250ms_after_flr(struct pci_dev *dev, int probe) 3945 { 3946 if (!pcie_has_flr(dev)) 3947 return -ENOTTY; 3948 3949 if (probe) 3950 return 0; 3951 3952 pcie_flr(dev); 3953 3954 msleep(250); 3955 3956 return 0; 3957 } 3958 3959 static const struct pci_dev_reset_methods pci_dev_reset_methods[] = { 3960 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82599_SFP_VF, 3961 reset_intel_82599_sfp_virtfn }, 3962 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M_VGA, 3963 reset_ivb_igd }, 3964 { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IVB_M2_VGA, 3965 reset_ivb_igd }, 3966 { PCI_VENDOR_ID_SAMSUNG, 0xa804, nvme_disable_and_flr }, 3967 { PCI_VENDOR_ID_INTEL, 0x0953, delay_250ms_after_flr }, 3968 { PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 3969 reset_chelsio_generic_dev }, 3970 { 0 } 3971 }; 3972 3973 /* 3974 * These device-specific reset methods are here rather than in a driver 3975 * because when a host assigns a device to a guest VM, the host may need 3976 * to reset the device but probably doesn't have a driver for it. 3977 */ 3978 int pci_dev_specific_reset(struct pci_dev *dev, int probe) 3979 { 3980 const struct pci_dev_reset_methods *i; 3981 3982 for (i = pci_dev_reset_methods; i->reset; i++) { 3983 if ((i->vendor == dev->vendor || 3984 i->vendor == (u16)PCI_ANY_ID) && 3985 (i->device == dev->device || 3986 i->device == (u16)PCI_ANY_ID)) 3987 return i->reset(dev, probe); 3988 } 3989 3990 return -ENOTTY; 3991 } 3992 3993 static void quirk_dma_func0_alias(struct pci_dev *dev) 3994 { 3995 if (PCI_FUNC(dev->devfn) != 0) 3996 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 0), 1); 3997 } 3998 3999 /* 4000 * https://bugzilla.redhat.com/show_bug.cgi?id=605888 4001 * 4002 * Some Ricoh devices use function 0 as the PCIe requester ID for DMA. 4003 */ 4004 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe832, quirk_dma_func0_alias); 4005 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_RICOH, 0xe476, quirk_dma_func0_alias); 4006 4007 static void quirk_dma_func1_alias(struct pci_dev *dev) 4008 { 4009 if (PCI_FUNC(dev->devfn) != 1) 4010 pci_add_dma_alias(dev, PCI_DEVFN(PCI_SLOT(dev->devfn), 1), 1); 4011 } 4012 4013 /* 4014 * Marvell 88SE9123 uses function 1 as the requester ID for DMA. In some 4015 * SKUs function 1 is present and is a legacy IDE controller, in other 4016 * SKUs this function is not present, making this a ghost requester. 4017 * https://bugzilla.kernel.org/show_bug.cgi?id=42679 4018 */ 4019 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9120, 4020 quirk_dma_func1_alias); 4021 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9123, 4022 quirk_dma_func1_alias); 4023 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9128, 4024 quirk_dma_func1_alias); 4025 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c14 */ 4026 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9130, 4027 quirk_dma_func1_alias); 4028 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9170, 4029 quirk_dma_func1_alias); 4030 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c47 + c57 */ 4031 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9172, 4032 quirk_dma_func1_alias); 4033 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c59 */ 4034 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x917a, 4035 quirk_dma_func1_alias); 4036 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c78 */ 4037 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9182, 4038 quirk_dma_func1_alias); 4039 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c134 */ 4040 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9183, 4041 quirk_dma_func1_alias); 4042 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c46 */ 4043 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x91a0, 4044 quirk_dma_func1_alias); 4045 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c127 */ 4046 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9220, 4047 quirk_dma_func1_alias); 4048 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c49 */ 4049 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL_EXT, 0x9230, 4050 quirk_dma_func1_alias); 4051 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0642, 4052 quirk_dma_func1_alias); 4053 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TTI, 0x0645, 4054 quirk_dma_func1_alias); 4055 /* https://bugs.gentoo.org/show_bug.cgi?id=497630 */ 4056 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON, 4057 PCI_DEVICE_ID_JMICRON_JMB388_ESD, 4058 quirk_dma_func1_alias); 4059 /* https://bugzilla.kernel.org/show_bug.cgi?id=42679#c117 */ 4060 DECLARE_PCI_FIXUP_HEADER(0x1c28, /* Lite-On */ 4061 0x0122, /* Plextor M6E (Marvell 88SS9183)*/ 4062 quirk_dma_func1_alias); 4063 4064 /* 4065 * Some devices DMA with the wrong devfn, not just the wrong function. 4066 * quirk_fixed_dma_alias() uses this table to create fixed aliases, where 4067 * the alias is "fixed" and independent of the device devfn. 4068 * 4069 * For example, the Adaptec 3405 is a PCIe card with an Intel 80333 I/O 4070 * processor. To software, this appears as a PCIe-to-PCI/X bridge with a 4071 * single device on the secondary bus. In reality, the single exposed 4072 * device at 0e.0 is the Address Translation Unit (ATU) of the controller 4073 * that provides a bridge to the internal bus of the I/O processor. The 4074 * controller supports private devices, which can be hidden from PCI config 4075 * space. In the case of the Adaptec 3405, a private device at 01.0 4076 * appears to be the DMA engine, which therefore needs to become a DMA 4077 * alias for the device. 4078 */ 4079 static const struct pci_device_id fixed_dma_alias_tbl[] = { 4080 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 4081 PCI_VENDOR_ID_ADAPTEC2, 0x02bb), /* Adaptec 3405 */ 4082 .driver_data = PCI_DEVFN(1, 0) }, 4083 { PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x0285, 4084 PCI_VENDOR_ID_ADAPTEC2, 0x02bc), /* Adaptec 3805 */ 4085 .driver_data = PCI_DEVFN(1, 0) }, 4086 { 0 } 4087 }; 4088 4089 static void quirk_fixed_dma_alias(struct pci_dev *dev) 4090 { 4091 const struct pci_device_id *id; 4092 4093 id = pci_match_id(fixed_dma_alias_tbl, dev); 4094 if (id) 4095 pci_add_dma_alias(dev, id->driver_data, 1); 4096 } 4097 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADAPTEC2, 0x0285, quirk_fixed_dma_alias); 4098 4099 /* 4100 * A few PCIe-to-PCI bridges fail to expose a PCIe capability, resulting in 4101 * using the wrong DMA alias for the device. Some of these devices can be 4102 * used as either forward or reverse bridges, so we need to test whether the 4103 * device is operating in the correct mode. We could probably apply this 4104 * quirk to PCI_ANY_ID, but for now we'll just use known offenders. The test 4105 * is for a non-root, non-PCIe bridge where the upstream device is PCIe and 4106 * is not a PCIe-to-PCI bridge, then @pdev is actually a PCIe-to-PCI bridge. 4107 */ 4108 static void quirk_use_pcie_bridge_dma_alias(struct pci_dev *pdev) 4109 { 4110 if (!pci_is_root_bus(pdev->bus) && 4111 pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE && 4112 !pci_is_pcie(pdev) && pci_is_pcie(pdev->bus->self) && 4113 pci_pcie_type(pdev->bus->self) != PCI_EXP_TYPE_PCI_BRIDGE) 4114 pdev->dev_flags |= PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS; 4115 } 4116 /* ASM1083/1085, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c46 */ 4117 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ASMEDIA, 0x1080, 4118 quirk_use_pcie_bridge_dma_alias); 4119 /* Tundra 8113, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c43 */ 4120 DECLARE_PCI_FIXUP_HEADER(0x10e3, 0x8113, quirk_use_pcie_bridge_dma_alias); 4121 /* ITE 8892, https://bugzilla.kernel.org/show_bug.cgi?id=73551 */ 4122 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8892, quirk_use_pcie_bridge_dma_alias); 4123 /* ITE 8893 has the same problem as the 8892 */ 4124 DECLARE_PCI_FIXUP_HEADER(0x1283, 0x8893, quirk_use_pcie_bridge_dma_alias); 4125 /* Intel 82801, https://bugzilla.kernel.org/show_bug.cgi?id=44881#c49 */ 4126 DECLARE_PCI_FIXUP_HEADER(0x8086, 0x244e, quirk_use_pcie_bridge_dma_alias); 4127 4128 /* 4129 * MIC x200 NTB forwards PCIe traffic using multiple alien RIDs. They have to 4130 * be added as aliases to the DMA device in order to allow buffer access 4131 * when IOMMU is enabled. Following devfns have to match RIT-LUT table 4132 * programmed in the EEPROM. 4133 */ 4134 static void quirk_mic_x200_dma_alias(struct pci_dev *pdev) 4135 { 4136 pci_add_dma_alias(pdev, PCI_DEVFN(0x10, 0x0), 1); 4137 pci_add_dma_alias(pdev, PCI_DEVFN(0x11, 0x0), 1); 4138 pci_add_dma_alias(pdev, PCI_DEVFN(0x12, 0x3), 1); 4139 } 4140 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2260, quirk_mic_x200_dma_alias); 4141 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2264, quirk_mic_x200_dma_alias); 4142 4143 /* 4144 * Intel Visual Compute Accelerator (VCA) is a family of PCIe add-in devices 4145 * exposing computational units via Non Transparent Bridges (NTB, PEX 87xx). 4146 * 4147 * Similarly to MIC x200, we need to add DMA aliases to allow buffer access 4148 * when IOMMU is enabled. These aliases allow computational unit access to 4149 * host memory. These aliases mark the whole VCA device as one IOMMU 4150 * group. 4151 * 4152 * All possible slot numbers (0x20) are used, since we are unable to tell 4153 * what slot is used on other side. This quirk is intended for both host 4154 * and computational unit sides. The VCA devices have up to five functions 4155 * (four for DMA channels and one additional). 4156 */ 4157 static void quirk_pex_vca_alias(struct pci_dev *pdev) 4158 { 4159 const unsigned int num_pci_slots = 0x20; 4160 unsigned int slot; 4161 4162 for (slot = 0; slot < num_pci_slots; slot++) 4163 pci_add_dma_alias(pdev, PCI_DEVFN(slot, 0x0), 5); 4164 } 4165 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2954, quirk_pex_vca_alias); 4166 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2955, quirk_pex_vca_alias); 4167 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2956, quirk_pex_vca_alias); 4168 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2958, quirk_pex_vca_alias); 4169 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2959, quirk_pex_vca_alias); 4170 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x295A, quirk_pex_vca_alias); 4171 4172 /* 4173 * The IOMMU and interrupt controller on Broadcom Vulcan/Cavium ThunderX2 are 4174 * associated not at the root bus, but at a bridge below. This quirk avoids 4175 * generating invalid DMA aliases. 4176 */ 4177 static void quirk_bridge_cavm_thrx2_pcie_root(struct pci_dev *pdev) 4178 { 4179 pdev->dev_flags |= PCI_DEV_FLAGS_BRIDGE_XLATE_ROOT; 4180 } 4181 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9000, 4182 quirk_bridge_cavm_thrx2_pcie_root); 4183 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, 0x9084, 4184 quirk_bridge_cavm_thrx2_pcie_root); 4185 4186 /* 4187 * Intersil/Techwell TW686[4589]-based video capture cards have an empty (zero) 4188 * class code. Fix it. 4189 */ 4190 static void quirk_tw686x_class(struct pci_dev *pdev) 4191 { 4192 u32 class = pdev->class; 4193 4194 /* Use "Multimedia controller" class */ 4195 pdev->class = (PCI_CLASS_MULTIMEDIA_OTHER << 8) | 0x01; 4196 pci_info(pdev, "TW686x PCI class overridden (%#08x -> %#08x)\n", 4197 class, pdev->class); 4198 } 4199 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6864, PCI_CLASS_NOT_DEFINED, 8, 4200 quirk_tw686x_class); 4201 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6865, PCI_CLASS_NOT_DEFINED, 8, 4202 quirk_tw686x_class); 4203 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6868, PCI_CLASS_NOT_DEFINED, 8, 4204 quirk_tw686x_class); 4205 DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, 4206 quirk_tw686x_class); 4207 4208 /* 4209 * Some devices have problems with Transaction Layer Packets with the Relaxed 4210 * Ordering Attribute set. Such devices should mark themselves and other 4211 * device drivers should check before sending TLPs with RO set. 4212 */ 4213 static void quirk_relaxedordering_disable(struct pci_dev *dev) 4214 { 4215 dev->dev_flags |= PCI_DEV_FLAGS_NO_RELAXED_ORDERING; 4216 pci_info(dev, "Disable Relaxed Ordering Attributes to avoid PCIe Completion erratum\n"); 4217 } 4218 4219 /* 4220 * Intel Xeon processors based on Broadwell/Haswell microarchitecture Root 4221 * Complex have a Flow Control Credit issue which can cause performance 4222 * problems with Upstream Transaction Layer Packets with Relaxed Ordering set. 4223 */ 4224 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f01, PCI_CLASS_NOT_DEFINED, 8, 4225 quirk_relaxedordering_disable); 4226 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f02, PCI_CLASS_NOT_DEFINED, 8, 4227 quirk_relaxedordering_disable); 4228 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f03, PCI_CLASS_NOT_DEFINED, 8, 4229 quirk_relaxedordering_disable); 4230 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f04, PCI_CLASS_NOT_DEFINED, 8, 4231 quirk_relaxedordering_disable); 4232 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f05, PCI_CLASS_NOT_DEFINED, 8, 4233 quirk_relaxedordering_disable); 4234 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f06, PCI_CLASS_NOT_DEFINED, 8, 4235 quirk_relaxedordering_disable); 4236 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f07, PCI_CLASS_NOT_DEFINED, 8, 4237 quirk_relaxedordering_disable); 4238 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f08, PCI_CLASS_NOT_DEFINED, 8, 4239 quirk_relaxedordering_disable); 4240 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f09, PCI_CLASS_NOT_DEFINED, 8, 4241 quirk_relaxedordering_disable); 4242 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0a, PCI_CLASS_NOT_DEFINED, 8, 4243 quirk_relaxedordering_disable); 4244 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0b, PCI_CLASS_NOT_DEFINED, 8, 4245 quirk_relaxedordering_disable); 4246 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0c, PCI_CLASS_NOT_DEFINED, 8, 4247 quirk_relaxedordering_disable); 4248 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0d, PCI_CLASS_NOT_DEFINED, 8, 4249 quirk_relaxedordering_disable); 4250 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x6f0e, PCI_CLASS_NOT_DEFINED, 8, 4251 quirk_relaxedordering_disable); 4252 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f01, PCI_CLASS_NOT_DEFINED, 8, 4253 quirk_relaxedordering_disable); 4254 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f02, PCI_CLASS_NOT_DEFINED, 8, 4255 quirk_relaxedordering_disable); 4256 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f03, PCI_CLASS_NOT_DEFINED, 8, 4257 quirk_relaxedordering_disable); 4258 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f04, PCI_CLASS_NOT_DEFINED, 8, 4259 quirk_relaxedordering_disable); 4260 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f05, PCI_CLASS_NOT_DEFINED, 8, 4261 quirk_relaxedordering_disable); 4262 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f06, PCI_CLASS_NOT_DEFINED, 8, 4263 quirk_relaxedordering_disable); 4264 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f07, PCI_CLASS_NOT_DEFINED, 8, 4265 quirk_relaxedordering_disable); 4266 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f08, PCI_CLASS_NOT_DEFINED, 8, 4267 quirk_relaxedordering_disable); 4268 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f09, PCI_CLASS_NOT_DEFINED, 8, 4269 quirk_relaxedordering_disable); 4270 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0a, PCI_CLASS_NOT_DEFINED, 8, 4271 quirk_relaxedordering_disable); 4272 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0b, PCI_CLASS_NOT_DEFINED, 8, 4273 quirk_relaxedordering_disable); 4274 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0c, PCI_CLASS_NOT_DEFINED, 8, 4275 quirk_relaxedordering_disable); 4276 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0d, PCI_CLASS_NOT_DEFINED, 8, 4277 quirk_relaxedordering_disable); 4278 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, 0x2f0e, PCI_CLASS_NOT_DEFINED, 8, 4279 quirk_relaxedordering_disable); 4280 4281 /* 4282 * The AMD ARM A1100 (aka "SEATTLE") SoC has a bug in its PCIe Root Complex 4283 * where Upstream Transaction Layer Packets with the Relaxed Ordering 4284 * Attribute clear are allowed to bypass earlier TLPs with Relaxed Ordering 4285 * set. This is a violation of the PCIe 3.0 Transaction Ordering Rules 4286 * outlined in Section 2.4.1 (PCI Express(r) Base Specification Revision 3.0 4287 * November 10, 2010). As a result, on this platform we can't use Relaxed 4288 * Ordering for Upstream TLPs. 4289 */ 4290 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a00, PCI_CLASS_NOT_DEFINED, 8, 4291 quirk_relaxedordering_disable); 4292 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a01, PCI_CLASS_NOT_DEFINED, 8, 4293 quirk_relaxedordering_disable); 4294 DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, 0x1a02, PCI_CLASS_NOT_DEFINED, 8, 4295 quirk_relaxedordering_disable); 4296 4297 /* 4298 * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same 4299 * values for the Attribute as were supplied in the header of the 4300 * corresponding Request, except as explicitly allowed when IDO is used." 4301 * 4302 * If a non-compliant device generates a completion with a different 4303 * attribute than the request, the receiver may accept it (which itself 4304 * seems non-compliant based on sec 2.3.2), or it may handle it as a 4305 * Malformed TLP or an Unexpected Completion, which will probably lead to a 4306 * device access timeout. 4307 * 4308 * If the non-compliant device generates completions with zero attributes 4309 * (instead of copying the attributes from the request), we can work around 4310 * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in 4311 * upstream devices so they always generate requests with zero attributes. 4312 * 4313 * This affects other devices under the same Root Port, but since these 4314 * attributes are performance hints, there should be no functional problem. 4315 * 4316 * Note that Configuration Space accesses are never supposed to have TLP 4317 * Attributes, so we're safe waiting till after any Configuration Space 4318 * accesses to do the Root Port fixup. 4319 */ 4320 static void quirk_disable_root_port_attributes(struct pci_dev *pdev) 4321 { 4322 struct pci_dev *root_port = pci_find_pcie_root_port(pdev); 4323 4324 if (!root_port) { 4325 pci_warn(pdev, "PCIe Completion erratum may cause device errors\n"); 4326 return; 4327 } 4328 4329 pci_info(root_port, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", 4330 dev_name(&pdev->dev)); 4331 pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, 4332 PCI_EXP_DEVCTL_RELAX_EN | 4333 PCI_EXP_DEVCTL_NOSNOOP_EN, 0); 4334 } 4335 4336 /* 4337 * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the 4338 * Completion it generates. 4339 */ 4340 static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) 4341 { 4342 /* 4343 * This mask/compare operation selects for Physical Function 4 on a 4344 * T5. We only need to fix up the Root Port once for any of the 4345 * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely 4346 * 0x54xx so we use that one. 4347 */ 4348 if ((pdev->device & 0xff00) == 0x5400) 4349 quirk_disable_root_port_attributes(pdev); 4350 } 4351 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, 4352 quirk_chelsio_T5_disable_root_port_attributes); 4353 4354 /* 4355 * pci_acs_ctrl_enabled - compare desired ACS controls with those provided 4356 * by a device 4357 * @acs_ctrl_req: Bitmask of desired ACS controls 4358 * @acs_ctrl_ena: Bitmask of ACS controls enabled or provided implicitly by 4359 * the hardware design 4360 * 4361 * Return 1 if all ACS controls in the @acs_ctrl_req bitmask are included 4362 * in @acs_ctrl_ena, i.e., the device provides all the access controls the 4363 * caller desires. Return 0 otherwise. 4364 */ 4365 static int pci_acs_ctrl_enabled(u16 acs_ctrl_req, u16 acs_ctrl_ena) 4366 { 4367 if ((acs_ctrl_req & acs_ctrl_ena) == acs_ctrl_req) 4368 return 1; 4369 return 0; 4370 } 4371 4372 /* 4373 * AMD has indicated that the devices below do not support peer-to-peer 4374 * in any system where they are found in the southbridge with an AMD 4375 * IOMMU in the system. Multifunction devices that do not support 4376 * peer-to-peer between functions can claim to support a subset of ACS. 4377 * Such devices effectively enable request redirect (RR) and completion 4378 * redirect (CR) since all transactions are redirected to the upstream 4379 * root complex. 4380 * 4381 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94086 4382 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/94102 4383 * http://permalink.gmane.org/gmane.comp.emulators.kvm.devel/99402 4384 * 4385 * 1002:4385 SBx00 SMBus Controller 4386 * 1002:439c SB7x0/SB8x0/SB9x0 IDE Controller 4387 * 1002:4383 SBx00 Azalia (Intel HDA) 4388 * 1002:439d SB7x0/SB8x0/SB9x0 LPC host controller 4389 * 1002:4384 SBx00 PCI to PCI Bridge 4390 * 1002:4399 SB7x0/SB8x0/SB9x0 USB OHCI2 Controller 4391 * 4392 * https://bugzilla.kernel.org/show_bug.cgi?id=81841#c15 4393 * 4394 * 1022:780f [AMD] FCH PCI Bridge 4395 * 1022:7809 [AMD] FCH USB OHCI Controller 4396 */ 4397 static int pci_quirk_amd_sb_acs(struct pci_dev *dev, u16 acs_flags) 4398 { 4399 #ifdef CONFIG_ACPI 4400 struct acpi_table_header *header = NULL; 4401 acpi_status status; 4402 4403 /* Targeting multifunction devices on the SB (appears on root bus) */ 4404 if (!dev->multifunction || !pci_is_root_bus(dev->bus)) 4405 return -ENODEV; 4406 4407 /* The IVRS table describes the AMD IOMMU */ 4408 status = acpi_get_table("IVRS", 0, &header); 4409 if (ACPI_FAILURE(status)) 4410 return -ENODEV; 4411 4412 /* Filter out flags not applicable to multifunction */ 4413 acs_flags &= (PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC | PCI_ACS_DT); 4414 4415 return pci_acs_ctrl_enabled(acs_flags, PCI_ACS_RR | PCI_ACS_CR); 4416 #else 4417 return -ENODEV; 4418 #endif 4419 } 4420 4421 static bool pci_quirk_cavium_acs_match(struct pci_dev *dev) 4422 { 4423 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4424 return false; 4425 4426 switch (dev->device) { 4427 /* 4428 * Effectively selects all downstream ports for whole ThunderX1 4429 * (which represents 8 SoCs). 4430 */ 4431 case 0xa000 ... 0xa7ff: /* ThunderX1 */ 4432 case 0xaf84: /* ThunderX2 */ 4433 case 0xb884: /* ThunderX3 */ 4434 return true; 4435 default: 4436 return false; 4437 } 4438 } 4439 4440 static int pci_quirk_cavium_acs(struct pci_dev *dev, u16 acs_flags) 4441 { 4442 if (!pci_quirk_cavium_acs_match(dev)) 4443 return -ENOTTY; 4444 4445 /* 4446 * Cavium Root Ports don't advertise an ACS capability. However, 4447 * the RTL internally implements similar protection as if ACS had 4448 * Source Validation, Request Redirection, Completion Redirection, 4449 * and Upstream Forwarding features enabled. Assert that the 4450 * hardware implements and enables equivalent ACS functionality for 4451 * these flags. 4452 */ 4453 return pci_acs_ctrl_enabled(acs_flags, 4454 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4455 } 4456 4457 static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) 4458 { 4459 /* 4460 * X-Gene Root Ports matching this quirk do not allow peer-to-peer 4461 * transactions with others, allowing masking out these bits as if they 4462 * were unimplemented in the ACS capability. 4463 */ 4464 return pci_acs_ctrl_enabled(acs_flags, 4465 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4466 } 4467 4468 /* 4469 * Many Zhaoxin Root Ports and Switch Downstream Ports have no ACS capability. 4470 * But the implementation could block peer-to-peer transactions between them 4471 * and provide ACS-like functionality. 4472 */ 4473 static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags) 4474 { 4475 if (!pci_is_pcie(dev) || 4476 ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) && 4477 (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))) 4478 return -ENOTTY; 4479 4480 switch (dev->device) { 4481 case 0x0710 ... 0x071e: 4482 case 0x0721: 4483 case 0x0723 ... 0x0732: 4484 return pci_acs_ctrl_enabled(acs_flags, 4485 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4486 } 4487 4488 return false; 4489 } 4490 4491 /* 4492 * Many Intel PCH Root Ports do provide ACS-like features to disable peer 4493 * transactions and validate bus numbers in requests, but do not provide an 4494 * actual PCIe ACS capability. This is the list of device IDs known to fall 4495 * into that category as provided by Intel in Red Hat bugzilla 1037684. 4496 */ 4497 static const u16 pci_quirk_intel_pch_acs_ids[] = { 4498 /* Ibexpeak PCH */ 4499 0x3b42, 0x3b43, 0x3b44, 0x3b45, 0x3b46, 0x3b47, 0x3b48, 0x3b49, 4500 0x3b4a, 0x3b4b, 0x3b4c, 0x3b4d, 0x3b4e, 0x3b4f, 0x3b50, 0x3b51, 4501 /* Cougarpoint PCH */ 4502 0x1c10, 0x1c11, 0x1c12, 0x1c13, 0x1c14, 0x1c15, 0x1c16, 0x1c17, 4503 0x1c18, 0x1c19, 0x1c1a, 0x1c1b, 0x1c1c, 0x1c1d, 0x1c1e, 0x1c1f, 4504 /* Pantherpoint PCH */ 4505 0x1e10, 0x1e11, 0x1e12, 0x1e13, 0x1e14, 0x1e15, 0x1e16, 0x1e17, 4506 0x1e18, 0x1e19, 0x1e1a, 0x1e1b, 0x1e1c, 0x1e1d, 0x1e1e, 0x1e1f, 4507 /* Lynxpoint-H PCH */ 4508 0x8c10, 0x8c11, 0x8c12, 0x8c13, 0x8c14, 0x8c15, 0x8c16, 0x8c17, 4509 0x8c18, 0x8c19, 0x8c1a, 0x8c1b, 0x8c1c, 0x8c1d, 0x8c1e, 0x8c1f, 4510 /* Lynxpoint-LP PCH */ 4511 0x9c10, 0x9c11, 0x9c12, 0x9c13, 0x9c14, 0x9c15, 0x9c16, 0x9c17, 4512 0x9c18, 0x9c19, 0x9c1a, 0x9c1b, 4513 /* Wildcat PCH */ 4514 0x9c90, 0x9c91, 0x9c92, 0x9c93, 0x9c94, 0x9c95, 0x9c96, 0x9c97, 4515 0x9c98, 0x9c99, 0x9c9a, 0x9c9b, 4516 /* Patsburg (X79) PCH */ 4517 0x1d10, 0x1d12, 0x1d14, 0x1d16, 0x1d18, 0x1d1a, 0x1d1c, 0x1d1e, 4518 /* Wellsburg (X99) PCH */ 4519 0x8d10, 0x8d11, 0x8d12, 0x8d13, 0x8d14, 0x8d15, 0x8d16, 0x8d17, 4520 0x8d18, 0x8d19, 0x8d1a, 0x8d1b, 0x8d1c, 0x8d1d, 0x8d1e, 4521 /* Lynx Point (9 series) PCH */ 4522 0x8c90, 0x8c92, 0x8c94, 0x8c96, 0x8c98, 0x8c9a, 0x8c9c, 0x8c9e, 4523 }; 4524 4525 static bool pci_quirk_intel_pch_acs_match(struct pci_dev *dev) 4526 { 4527 int i; 4528 4529 /* Filter out a few obvious non-matches first */ 4530 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4531 return false; 4532 4533 for (i = 0; i < ARRAY_SIZE(pci_quirk_intel_pch_acs_ids); i++) 4534 if (pci_quirk_intel_pch_acs_ids[i] == dev->device) 4535 return true; 4536 4537 return false; 4538 } 4539 4540 static int pci_quirk_intel_pch_acs(struct pci_dev *dev, u16 acs_flags) 4541 { 4542 if (!pci_quirk_intel_pch_acs_match(dev)) 4543 return -ENOTTY; 4544 4545 if (dev->dev_flags & PCI_DEV_FLAGS_ACS_ENABLED_QUIRK) 4546 return pci_acs_ctrl_enabled(acs_flags, 4547 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4548 4549 return pci_acs_ctrl_enabled(acs_flags, 0); 4550 } 4551 4552 /* 4553 * These QCOM Root Ports do provide ACS-like features to disable peer 4554 * transactions and validate bus numbers in requests, but do not provide an 4555 * actual PCIe ACS capability. Hardware supports source validation but it 4556 * will report the issue as Completer Abort instead of ACS Violation. 4557 * Hardware doesn't support peer-to-peer and each Root Port is a Root 4558 * Complex with unique segment numbers. It is not possible for one Root 4559 * Port to pass traffic to another Root Port. All PCIe transactions are 4560 * terminated inside the Root Port. 4561 */ 4562 static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags) 4563 { 4564 return pci_acs_ctrl_enabled(acs_flags, 4565 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4566 } 4567 4568 static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags) 4569 { 4570 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4571 return -ENOTTY; 4572 4573 /* 4574 * Amazon's Annapurna Labs root ports don't include an ACS capability, 4575 * but do include ACS-like functionality. The hardware doesn't support 4576 * peer-to-peer transactions via the root port and each has a unique 4577 * segment number. 4578 * 4579 * Additionally, the root ports cannot send traffic to each other. 4580 */ 4581 acs_flags &= ~(PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4582 4583 return acs_flags ? 0 : 1; 4584 } 4585 4586 /* 4587 * Sunrise Point PCH root ports implement ACS, but unfortunately as shown in 4588 * the datasheet (Intel 100 Series Chipset Family PCH Datasheet, Vol. 2, 4589 * 12.1.46, 12.1.47)[1] this chipset uses dwords for the ACS capability and 4590 * control registers whereas the PCIe spec packs them into words (Rev 3.0, 4591 * 7.16 ACS Extended Capability). The bit definitions are correct, but the 4592 * control register is at offset 8 instead of 6 and we should probably use 4593 * dword accesses to them. This applies to the following PCI Device IDs, as 4594 * found in volume 1 of the datasheet[2]: 4595 * 4596 * 0xa110-0xa11f Sunrise Point-H PCI Express Root Port #{0-16} 4597 * 0xa167-0xa16a Sunrise Point-H PCI Express Root Port #{17-20} 4598 * 4599 * N.B. This doesn't fix what lspci shows. 4600 * 4601 * The 100 series chipset specification update includes this as errata #23[3]. 4602 * 4603 * The 200 series chipset (Union Point) has the same bug according to the 4604 * specification update (Intel 200 Series Chipset Family Platform Controller 4605 * Hub, Specification Update, January 2017, Revision 001, Document# 335194-001, 4606 * Errata 22)[4]. Per the datasheet[5], root port PCI Device IDs for this 4607 * chipset include: 4608 * 4609 * 0xa290-0xa29f PCI Express Root port #{0-16} 4610 * 0xa2e7-0xa2ee PCI Express Root port #{17-24} 4611 * 4612 * Mobile chipsets are also affected, 7th & 8th Generation 4613 * Specification update confirms ACS errata 22, status no fix: (7th Generation 4614 * Intel Processor Family I/O for U/Y Platforms and 8th Generation Intel 4615 * Processor Family I/O for U Quad Core Platforms Specification Update, 4616 * August 2017, Revision 002, Document#: 334660-002)[6] 4617 * Device IDs from I/O datasheet: (7th Generation Intel Processor Family I/O 4618 * for U/Y Platforms and 8th Generation Intel ® Processor Family I/O for U 4619 * Quad Core Platforms, Vol 1 of 2, August 2017, Document#: 334658-003)[7] 4620 * 4621 * 0x9d10-0x9d1b PCI Express Root port #{1-12} 4622 * 4623 * [1] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-2.html 4624 * [2] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-datasheet-vol-1.html 4625 * [3] http://www.intel.com/content/www/us/en/chipsets/100-series-chipset-spec-update.html 4626 * [4] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-spec-update.html 4627 * [5] http://www.intel.com/content/www/us/en/chipsets/200-series-chipset-pch-datasheet-vol-1.html 4628 * [6] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-spec-update.html 4629 * [7] https://www.intel.com/content/www/us/en/processors/core/7th-gen-core-family-mobile-u-y-processor-lines-i-o-datasheet-vol-1.html 4630 */ 4631 static bool pci_quirk_intel_spt_pch_acs_match(struct pci_dev *dev) 4632 { 4633 if (!pci_is_pcie(dev) || pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 4634 return false; 4635 4636 switch (dev->device) { 4637 case 0xa110 ... 0xa11f: case 0xa167 ... 0xa16a: /* Sunrise Point */ 4638 case 0xa290 ... 0xa29f: case 0xa2e7 ... 0xa2ee: /* Union Point */ 4639 case 0x9d10 ... 0x9d1b: /* 7th & 8th Gen Mobile */ 4640 return true; 4641 } 4642 4643 return false; 4644 } 4645 4646 #define INTEL_SPT_ACS_CTRL (PCI_ACS_CAP + 4) 4647 4648 static int pci_quirk_intel_spt_pch_acs(struct pci_dev *dev, u16 acs_flags) 4649 { 4650 int pos; 4651 u32 cap, ctrl; 4652 4653 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4654 return -ENOTTY; 4655 4656 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4657 if (!pos) 4658 return -ENOTTY; 4659 4660 /* see pci_acs_flags_enabled() */ 4661 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4662 acs_flags &= (cap | PCI_ACS_EC); 4663 4664 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4665 4666 return pci_acs_ctrl_enabled(acs_flags, ctrl); 4667 } 4668 4669 static int pci_quirk_mf_endpoint_acs(struct pci_dev *dev, u16 acs_flags) 4670 { 4671 /* 4672 * SV, TB, and UF are not relevant to multifunction endpoints. 4673 * 4674 * Multifunction devices are only required to implement RR, CR, and DT 4675 * in their ACS capability if they support peer-to-peer transactions. 4676 * Devices matching this quirk have been verified by the vendor to not 4677 * perform peer-to-peer with other functions, allowing us to mask out 4678 * these bits as if they were unimplemented in the ACS capability. 4679 */ 4680 return pci_acs_ctrl_enabled(acs_flags, 4681 PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 4682 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT); 4683 } 4684 4685 static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags) 4686 { 4687 /* 4688 * iProc PAXB Root Ports don't advertise an ACS capability, but 4689 * they do not allow peer-to-peer transactions between Root Ports. 4690 * Allow each Root Port to be in a separate IOMMU group by masking 4691 * SV/RR/CR/UF bits. 4692 */ 4693 return pci_acs_ctrl_enabled(acs_flags, 4694 PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); 4695 } 4696 4697 static const struct pci_dev_acs_enabled { 4698 u16 vendor; 4699 u16 device; 4700 int (*acs_enabled)(struct pci_dev *dev, u16 acs_flags); 4701 } pci_dev_acs_enabled[] = { 4702 { PCI_VENDOR_ID_ATI, 0x4385, pci_quirk_amd_sb_acs }, 4703 { PCI_VENDOR_ID_ATI, 0x439c, pci_quirk_amd_sb_acs }, 4704 { PCI_VENDOR_ID_ATI, 0x4383, pci_quirk_amd_sb_acs }, 4705 { PCI_VENDOR_ID_ATI, 0x439d, pci_quirk_amd_sb_acs }, 4706 { PCI_VENDOR_ID_ATI, 0x4384, pci_quirk_amd_sb_acs }, 4707 { PCI_VENDOR_ID_ATI, 0x4399, pci_quirk_amd_sb_acs }, 4708 { PCI_VENDOR_ID_AMD, 0x780f, pci_quirk_amd_sb_acs }, 4709 { PCI_VENDOR_ID_AMD, 0x7809, pci_quirk_amd_sb_acs }, 4710 { PCI_VENDOR_ID_SOLARFLARE, 0x0903, pci_quirk_mf_endpoint_acs }, 4711 { PCI_VENDOR_ID_SOLARFLARE, 0x0923, pci_quirk_mf_endpoint_acs }, 4712 { PCI_VENDOR_ID_SOLARFLARE, 0x0A03, pci_quirk_mf_endpoint_acs }, 4713 { PCI_VENDOR_ID_INTEL, 0x10C6, pci_quirk_mf_endpoint_acs }, 4714 { PCI_VENDOR_ID_INTEL, 0x10DB, pci_quirk_mf_endpoint_acs }, 4715 { PCI_VENDOR_ID_INTEL, 0x10DD, pci_quirk_mf_endpoint_acs }, 4716 { PCI_VENDOR_ID_INTEL, 0x10E1, pci_quirk_mf_endpoint_acs }, 4717 { PCI_VENDOR_ID_INTEL, 0x10F1, pci_quirk_mf_endpoint_acs }, 4718 { PCI_VENDOR_ID_INTEL, 0x10F7, pci_quirk_mf_endpoint_acs }, 4719 { PCI_VENDOR_ID_INTEL, 0x10F8, pci_quirk_mf_endpoint_acs }, 4720 { PCI_VENDOR_ID_INTEL, 0x10F9, pci_quirk_mf_endpoint_acs }, 4721 { PCI_VENDOR_ID_INTEL, 0x10FA, pci_quirk_mf_endpoint_acs }, 4722 { PCI_VENDOR_ID_INTEL, 0x10FB, pci_quirk_mf_endpoint_acs }, 4723 { PCI_VENDOR_ID_INTEL, 0x10FC, pci_quirk_mf_endpoint_acs }, 4724 { PCI_VENDOR_ID_INTEL, 0x1507, pci_quirk_mf_endpoint_acs }, 4725 { PCI_VENDOR_ID_INTEL, 0x1514, pci_quirk_mf_endpoint_acs }, 4726 { PCI_VENDOR_ID_INTEL, 0x151C, pci_quirk_mf_endpoint_acs }, 4727 { PCI_VENDOR_ID_INTEL, 0x1529, pci_quirk_mf_endpoint_acs }, 4728 { PCI_VENDOR_ID_INTEL, 0x152A, pci_quirk_mf_endpoint_acs }, 4729 { PCI_VENDOR_ID_INTEL, 0x154D, pci_quirk_mf_endpoint_acs }, 4730 { PCI_VENDOR_ID_INTEL, 0x154F, pci_quirk_mf_endpoint_acs }, 4731 { PCI_VENDOR_ID_INTEL, 0x1551, pci_quirk_mf_endpoint_acs }, 4732 { PCI_VENDOR_ID_INTEL, 0x1558, pci_quirk_mf_endpoint_acs }, 4733 /* 82580 */ 4734 { PCI_VENDOR_ID_INTEL, 0x1509, pci_quirk_mf_endpoint_acs }, 4735 { PCI_VENDOR_ID_INTEL, 0x150E, pci_quirk_mf_endpoint_acs }, 4736 { PCI_VENDOR_ID_INTEL, 0x150F, pci_quirk_mf_endpoint_acs }, 4737 { PCI_VENDOR_ID_INTEL, 0x1510, pci_quirk_mf_endpoint_acs }, 4738 { PCI_VENDOR_ID_INTEL, 0x1511, pci_quirk_mf_endpoint_acs }, 4739 { PCI_VENDOR_ID_INTEL, 0x1516, pci_quirk_mf_endpoint_acs }, 4740 { PCI_VENDOR_ID_INTEL, 0x1527, pci_quirk_mf_endpoint_acs }, 4741 /* 82576 */ 4742 { PCI_VENDOR_ID_INTEL, 0x10C9, pci_quirk_mf_endpoint_acs }, 4743 { PCI_VENDOR_ID_INTEL, 0x10E6, pci_quirk_mf_endpoint_acs }, 4744 { PCI_VENDOR_ID_INTEL, 0x10E7, pci_quirk_mf_endpoint_acs }, 4745 { PCI_VENDOR_ID_INTEL, 0x10E8, pci_quirk_mf_endpoint_acs }, 4746 { PCI_VENDOR_ID_INTEL, 0x150A, pci_quirk_mf_endpoint_acs }, 4747 { PCI_VENDOR_ID_INTEL, 0x150D, pci_quirk_mf_endpoint_acs }, 4748 { PCI_VENDOR_ID_INTEL, 0x1518, pci_quirk_mf_endpoint_acs }, 4749 { PCI_VENDOR_ID_INTEL, 0x1526, pci_quirk_mf_endpoint_acs }, 4750 /* 82575 */ 4751 { PCI_VENDOR_ID_INTEL, 0x10A7, pci_quirk_mf_endpoint_acs }, 4752 { PCI_VENDOR_ID_INTEL, 0x10A9, pci_quirk_mf_endpoint_acs }, 4753 { PCI_VENDOR_ID_INTEL, 0x10D6, pci_quirk_mf_endpoint_acs }, 4754 /* I350 */ 4755 { PCI_VENDOR_ID_INTEL, 0x1521, pci_quirk_mf_endpoint_acs }, 4756 { PCI_VENDOR_ID_INTEL, 0x1522, pci_quirk_mf_endpoint_acs }, 4757 { PCI_VENDOR_ID_INTEL, 0x1523, pci_quirk_mf_endpoint_acs }, 4758 { PCI_VENDOR_ID_INTEL, 0x1524, pci_quirk_mf_endpoint_acs }, 4759 /* 82571 (Quads omitted due to non-ACS switch) */ 4760 { PCI_VENDOR_ID_INTEL, 0x105E, pci_quirk_mf_endpoint_acs }, 4761 { PCI_VENDOR_ID_INTEL, 0x105F, pci_quirk_mf_endpoint_acs }, 4762 { PCI_VENDOR_ID_INTEL, 0x1060, pci_quirk_mf_endpoint_acs }, 4763 { PCI_VENDOR_ID_INTEL, 0x10D9, pci_quirk_mf_endpoint_acs }, 4764 /* I219 */ 4765 { PCI_VENDOR_ID_INTEL, 0x15b7, pci_quirk_mf_endpoint_acs }, 4766 { PCI_VENDOR_ID_INTEL, 0x15b8, pci_quirk_mf_endpoint_acs }, 4767 /* QCOM QDF2xxx root ports */ 4768 { PCI_VENDOR_ID_QCOM, 0x0400, pci_quirk_qcom_rp_acs }, 4769 { PCI_VENDOR_ID_QCOM, 0x0401, pci_quirk_qcom_rp_acs }, 4770 /* HXT SD4800 root ports. The ACS design is same as QCOM QDF2xxx */ 4771 { PCI_VENDOR_ID_HXT, 0x0401, pci_quirk_qcom_rp_acs }, 4772 /* Intel PCH root ports */ 4773 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_pch_acs }, 4774 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_quirk_intel_spt_pch_acs }, 4775 { 0x19a2, 0x710, pci_quirk_mf_endpoint_acs }, /* Emulex BE3-R */ 4776 { 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */ 4777 /* Cavium ThunderX */ 4778 { PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs }, 4779 /* APM X-Gene */ 4780 { PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs }, 4781 /* Ampere Computing */ 4782 { PCI_VENDOR_ID_AMPERE, 0xE005, pci_quirk_xgene_acs }, 4783 { PCI_VENDOR_ID_AMPERE, 0xE006, pci_quirk_xgene_acs }, 4784 { PCI_VENDOR_ID_AMPERE, 0xE007, pci_quirk_xgene_acs }, 4785 { PCI_VENDOR_ID_AMPERE, 0xE008, pci_quirk_xgene_acs }, 4786 { PCI_VENDOR_ID_AMPERE, 0xE009, pci_quirk_xgene_acs }, 4787 { PCI_VENDOR_ID_AMPERE, 0xE00A, pci_quirk_xgene_acs }, 4788 { PCI_VENDOR_ID_AMPERE, 0xE00B, pci_quirk_xgene_acs }, 4789 { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs }, 4790 { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, 4791 /* Amazon Annapurna Labs */ 4792 { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs }, 4793 /* Zhaoxin multi-function devices */ 4794 { PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs }, 4795 { PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs }, 4796 { PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs }, 4797 /* Zhaoxin Root/Downstream Ports */ 4798 { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs }, 4799 { 0 } 4800 }; 4801 4802 /* 4803 * pci_dev_specific_acs_enabled - check whether device provides ACS controls 4804 * @dev: PCI device 4805 * @acs_flags: Bitmask of desired ACS controls 4806 * 4807 * Returns: 4808 * -ENOTTY: No quirk applies to this device; we can't tell whether the 4809 * device provides the desired controls 4810 * 0: Device does not provide all the desired controls 4811 * >0: Device provides all the controls in @acs_flags 4812 */ 4813 int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags) 4814 { 4815 const struct pci_dev_acs_enabled *i; 4816 int ret; 4817 4818 /* 4819 * Allow devices that do not expose standard PCIe ACS capabilities 4820 * or control to indicate their support here. Multi-function express 4821 * devices which do not allow internal peer-to-peer between functions, 4822 * but do not implement PCIe ACS may wish to return true here. 4823 */ 4824 for (i = pci_dev_acs_enabled; i->acs_enabled; i++) { 4825 if ((i->vendor == dev->vendor || 4826 i->vendor == (u16)PCI_ANY_ID) && 4827 (i->device == dev->device || 4828 i->device == (u16)PCI_ANY_ID)) { 4829 ret = i->acs_enabled(dev, acs_flags); 4830 if (ret >= 0) 4831 return ret; 4832 } 4833 } 4834 4835 return -ENOTTY; 4836 } 4837 4838 /* Config space offset of Root Complex Base Address register */ 4839 #define INTEL_LPC_RCBA_REG 0xf0 4840 /* 31:14 RCBA address */ 4841 #define INTEL_LPC_RCBA_MASK 0xffffc000 4842 /* RCBA Enable */ 4843 #define INTEL_LPC_RCBA_ENABLE (1 << 0) 4844 4845 /* Backbone Scratch Pad Register */ 4846 #define INTEL_BSPR_REG 0x1104 4847 /* Backbone Peer Non-Posted Disable */ 4848 #define INTEL_BSPR_REG_BPNPD (1 << 8) 4849 /* Backbone Peer Posted Disable */ 4850 #define INTEL_BSPR_REG_BPPD (1 << 9) 4851 4852 /* Upstream Peer Decode Configuration Register */ 4853 #define INTEL_UPDCR_REG 0x1014 4854 /* 5:0 Peer Decode Enable bits */ 4855 #define INTEL_UPDCR_REG_MASK 0x3f 4856 4857 static int pci_quirk_enable_intel_lpc_acs(struct pci_dev *dev) 4858 { 4859 u32 rcba, bspr, updcr; 4860 void __iomem *rcba_mem; 4861 4862 /* 4863 * Read the RCBA register from the LPC (D31:F0). PCH root ports 4864 * are D28:F* and therefore get probed before LPC, thus we can't 4865 * use pci_get_slot()/pci_read_config_dword() here. 4866 */ 4867 pci_bus_read_config_dword(dev->bus, PCI_DEVFN(31, 0), 4868 INTEL_LPC_RCBA_REG, &rcba); 4869 if (!(rcba & INTEL_LPC_RCBA_ENABLE)) 4870 return -EINVAL; 4871 4872 rcba_mem = ioremap(rcba & INTEL_LPC_RCBA_MASK, 4873 PAGE_ALIGN(INTEL_UPDCR_REG)); 4874 if (!rcba_mem) 4875 return -ENOMEM; 4876 4877 /* 4878 * The BSPR can disallow peer cycles, but it's set by soft strap and 4879 * therefore read-only. If both posted and non-posted peer cycles are 4880 * disallowed, we're ok. If either are allowed, then we need to use 4881 * the UPDCR to disable peer decodes for each port. This provides the 4882 * PCIe ACS equivalent of PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF 4883 */ 4884 bspr = readl(rcba_mem + INTEL_BSPR_REG); 4885 bspr &= INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD; 4886 if (bspr != (INTEL_BSPR_REG_BPNPD | INTEL_BSPR_REG_BPPD)) { 4887 updcr = readl(rcba_mem + INTEL_UPDCR_REG); 4888 if (updcr & INTEL_UPDCR_REG_MASK) { 4889 pci_info(dev, "Disabling UPDCR peer decodes\n"); 4890 updcr &= ~INTEL_UPDCR_REG_MASK; 4891 writel(updcr, rcba_mem + INTEL_UPDCR_REG); 4892 } 4893 } 4894 4895 iounmap(rcba_mem); 4896 return 0; 4897 } 4898 4899 /* Miscellaneous Port Configuration register */ 4900 #define INTEL_MPC_REG 0xd8 4901 /* MPC: Invalid Receive Bus Number Check Enable */ 4902 #define INTEL_MPC_REG_IRBNCE (1 << 26) 4903 4904 static void pci_quirk_enable_intel_rp_mpc_acs(struct pci_dev *dev) 4905 { 4906 u32 mpc; 4907 4908 /* 4909 * When enabled, the IRBNCE bit of the MPC register enables the 4910 * equivalent of PCI ACS Source Validation (PCI_ACS_SV), which 4911 * ensures that requester IDs fall within the bus number range 4912 * of the bridge. Enable if not already. 4913 */ 4914 pci_read_config_dword(dev, INTEL_MPC_REG, &mpc); 4915 if (!(mpc & INTEL_MPC_REG_IRBNCE)) { 4916 pci_info(dev, "Enabling MPC IRBNCE\n"); 4917 mpc |= INTEL_MPC_REG_IRBNCE; 4918 pci_write_config_word(dev, INTEL_MPC_REG, mpc); 4919 } 4920 } 4921 4922 static int pci_quirk_enable_intel_pch_acs(struct pci_dev *dev) 4923 { 4924 if (!pci_quirk_intel_pch_acs_match(dev)) 4925 return -ENOTTY; 4926 4927 if (pci_quirk_enable_intel_lpc_acs(dev)) { 4928 pci_warn(dev, "Failed to enable Intel PCH ACS quirk\n"); 4929 return 0; 4930 } 4931 4932 pci_quirk_enable_intel_rp_mpc_acs(dev); 4933 4934 dev->dev_flags |= PCI_DEV_FLAGS_ACS_ENABLED_QUIRK; 4935 4936 pci_info(dev, "Intel PCH root port ACS workaround enabled\n"); 4937 4938 return 0; 4939 } 4940 4941 static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev) 4942 { 4943 int pos; 4944 u32 cap, ctrl; 4945 4946 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4947 return -ENOTTY; 4948 4949 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4950 if (!pos) 4951 return -ENOTTY; 4952 4953 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4954 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4955 4956 ctrl |= (cap & PCI_ACS_SV); 4957 ctrl |= (cap & PCI_ACS_RR); 4958 ctrl |= (cap & PCI_ACS_CR); 4959 ctrl |= (cap & PCI_ACS_UF); 4960 4961 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl); 4962 4963 pci_info(dev, "Intel SPT PCH root port ACS workaround enabled\n"); 4964 4965 return 0; 4966 } 4967 4968 static int pci_quirk_disable_intel_spt_pch_acs_redir(struct pci_dev *dev) 4969 { 4970 int pos; 4971 u32 cap, ctrl; 4972 4973 if (!pci_quirk_intel_spt_pch_acs_match(dev)) 4974 return -ENOTTY; 4975 4976 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ACS); 4977 if (!pos) 4978 return -ENOTTY; 4979 4980 pci_read_config_dword(dev, pos + PCI_ACS_CAP, &cap); 4981 pci_read_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, &ctrl); 4982 4983 ctrl &= ~(PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_EC); 4984 4985 pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl); 4986 4987 pci_info(dev, "Intel SPT PCH root port workaround: disabled ACS redirect\n"); 4988 4989 return 0; 4990 } 4991 4992 static const struct pci_dev_acs_ops { 4993 u16 vendor; 4994 u16 device; 4995 int (*enable_acs)(struct pci_dev *dev); 4996 int (*disable_acs_redir)(struct pci_dev *dev); 4997 } pci_dev_acs_ops[] = { 4998 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 4999 .enable_acs = pci_quirk_enable_intel_pch_acs, 5000 }, 5001 { PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 5002 .enable_acs = pci_quirk_enable_intel_spt_pch_acs, 5003 .disable_acs_redir = pci_quirk_disable_intel_spt_pch_acs_redir, 5004 }, 5005 }; 5006 5007 int pci_dev_specific_enable_acs(struct pci_dev *dev) 5008 { 5009 const struct pci_dev_acs_ops *p; 5010 int i, ret; 5011 5012 for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) { 5013 p = &pci_dev_acs_ops[i]; 5014 if ((p->vendor == dev->vendor || 5015 p->vendor == (u16)PCI_ANY_ID) && 5016 (p->device == dev->device || 5017 p->device == (u16)PCI_ANY_ID) && 5018 p->enable_acs) { 5019 ret = p->enable_acs(dev); 5020 if (ret >= 0) 5021 return ret; 5022 } 5023 } 5024 5025 return -ENOTTY; 5026 } 5027 5028 int pci_dev_specific_disable_acs_redir(struct pci_dev *dev) 5029 { 5030 const struct pci_dev_acs_ops *p; 5031 int i, ret; 5032 5033 for (i = 0; i < ARRAY_SIZE(pci_dev_acs_ops); i++) { 5034 p = &pci_dev_acs_ops[i]; 5035 if ((p->vendor == dev->vendor || 5036 p->vendor == (u16)PCI_ANY_ID) && 5037 (p->device == dev->device || 5038 p->device == (u16)PCI_ANY_ID) && 5039 p->disable_acs_redir) { 5040 ret = p->disable_acs_redir(dev); 5041 if (ret >= 0) 5042 return ret; 5043 } 5044 } 5045 5046 return -ENOTTY; 5047 } 5048 5049 /* 5050 * The PCI capabilities list for Intel DH895xCC VFs (device ID 0x0443) with 5051 * QuickAssist Technology (QAT) is prematurely terminated in hardware. The 5052 * Next Capability pointer in the MSI Capability Structure should point to 5053 * the PCIe Capability Structure but is incorrectly hardwired as 0 terminating 5054 * the list. 5055 */ 5056 static void quirk_intel_qat_vf_cap(struct pci_dev *pdev) 5057 { 5058 int pos, i = 0; 5059 u8 next_cap; 5060 u16 reg16, *cap; 5061 struct pci_cap_saved_state *state; 5062 5063 /* Bail if the hardware bug is fixed */ 5064 if (pdev->pcie_cap || pci_find_capability(pdev, PCI_CAP_ID_EXP)) 5065 return; 5066 5067 /* Bail if MSI Capability Structure is not found for some reason */ 5068 pos = pci_find_capability(pdev, PCI_CAP_ID_MSI); 5069 if (!pos) 5070 return; 5071 5072 /* 5073 * Bail if Next Capability pointer in the MSI Capability Structure 5074 * is not the expected incorrect 0x00. 5075 */ 5076 pci_read_config_byte(pdev, pos + 1, &next_cap); 5077 if (next_cap) 5078 return; 5079 5080 /* 5081 * PCIe Capability Structure is expected to be at 0x50 and should 5082 * terminate the list (Next Capability pointer is 0x00). Verify 5083 * Capability Id and Next Capability pointer is as expected. 5084 * Open-code some of set_pcie_port_type() and pci_cfg_space_size_ext() 5085 * to correctly set kernel data structures which have already been 5086 * set incorrectly due to the hardware bug. 5087 */ 5088 pos = 0x50; 5089 pci_read_config_word(pdev, pos, ®16); 5090 if (reg16 == (0x0000 | PCI_CAP_ID_EXP)) { 5091 u32 status; 5092 #ifndef PCI_EXP_SAVE_REGS 5093 #define PCI_EXP_SAVE_REGS 7 5094 #endif 5095 int size = PCI_EXP_SAVE_REGS * sizeof(u16); 5096 5097 pdev->pcie_cap = pos; 5098 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 5099 pdev->pcie_flags_reg = reg16; 5100 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); 5101 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; 5102 5103 pdev->cfg_size = PCI_CFG_SPACE_EXP_SIZE; 5104 if (pci_read_config_dword(pdev, PCI_CFG_SPACE_SIZE, &status) != 5105 PCIBIOS_SUCCESSFUL || (status == 0xffffffff)) 5106 pdev->cfg_size = PCI_CFG_SPACE_SIZE; 5107 5108 if (pci_find_saved_cap(pdev, PCI_CAP_ID_EXP)) 5109 return; 5110 5111 /* Save PCIe cap */ 5112 state = kzalloc(sizeof(*state) + size, GFP_KERNEL); 5113 if (!state) 5114 return; 5115 5116 state->cap.cap_nr = PCI_CAP_ID_EXP; 5117 state->cap.cap_extended = 0; 5118 state->cap.size = size; 5119 cap = (u16 *)&state->cap.data[0]; 5120 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL, &cap[i++]); 5121 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &cap[i++]); 5122 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL, &cap[i++]); 5123 pcie_capability_read_word(pdev, PCI_EXP_RTCTL, &cap[i++]); 5124 pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &cap[i++]); 5125 pcie_capability_read_word(pdev, PCI_EXP_LNKCTL2, &cap[i++]); 5126 pcie_capability_read_word(pdev, PCI_EXP_SLTCTL2, &cap[i++]); 5127 hlist_add_head(&state->next, &pdev->saved_cap_space); 5128 } 5129 } 5130 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x443, quirk_intel_qat_vf_cap); 5131 5132 /* FLR may cause some 82579 devices to hang */ 5133 static void quirk_intel_no_flr(struct pci_dev *dev) 5134 { 5135 dev->dev_flags |= PCI_DEV_FLAGS_NO_FLR_RESET; 5136 } 5137 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1502, quirk_intel_no_flr); 5138 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x1503, quirk_intel_no_flr); 5139 5140 static void quirk_no_ext_tags(struct pci_dev *pdev) 5141 { 5142 struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); 5143 5144 if (!bridge) 5145 return; 5146 5147 bridge->no_ext_tags = 1; 5148 pci_info(pdev, "disabling Extended Tags (this device can't handle them)\n"); 5149 5150 pci_walk_bus(bridge->bus, pci_configure_extended_tags, NULL); 5151 } 5152 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0132, quirk_no_ext_tags); 5153 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0140, quirk_no_ext_tags); 5154 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0141, quirk_no_ext_tags); 5155 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0142, quirk_no_ext_tags); 5156 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0144, quirk_no_ext_tags); 5157 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0420, quirk_no_ext_tags); 5158 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERVERWORKS, 0x0422, quirk_no_ext_tags); 5159 5160 #ifdef CONFIG_PCI_ATS 5161 /* 5162 * Some devices require additional driver setup to enable ATS. Don't use 5163 * ATS for those devices as ATS will be enabled before the driver has had a 5164 * chance to load and configure the device. 5165 */ 5166 static void quirk_amd_harvest_no_ats(struct pci_dev *pdev) 5167 { 5168 if (pdev->device == 0x7340 && pdev->revision != 0xc5) 5169 return; 5170 5171 pci_info(pdev, "disabling ATS\n"); 5172 pdev->ats_cap = 0; 5173 } 5174 5175 /* AMD Stoney platform GPU */ 5176 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x98e4, quirk_amd_harvest_no_ats); 5177 /* AMD Iceland dGPU */ 5178 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x6900, quirk_amd_harvest_no_ats); 5179 /* AMD Navi14 dGPU */ 5180 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x7340, quirk_amd_harvest_no_ats); 5181 #endif /* CONFIG_PCI_ATS */ 5182 5183 /* Freescale PCIe doesn't support MSI in RC mode */ 5184 static void quirk_fsl_no_msi(struct pci_dev *pdev) 5185 { 5186 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT) 5187 pdev->no_msi = 1; 5188 } 5189 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, quirk_fsl_no_msi); 5190 5191 /* 5192 * Although not allowed by the spec, some multi-function devices have 5193 * dependencies of one function (consumer) on another (supplier). For the 5194 * consumer to work in D0, the supplier must also be in D0. Create a 5195 * device link from the consumer to the supplier to enforce this 5196 * dependency. Runtime PM is allowed by default on the consumer to prevent 5197 * it from permanently keeping the supplier awake. 5198 */ 5199 static void pci_create_device_link(struct pci_dev *pdev, unsigned int consumer, 5200 unsigned int supplier, unsigned int class, 5201 unsigned int class_shift) 5202 { 5203 struct pci_dev *supplier_pdev; 5204 5205 if (PCI_FUNC(pdev->devfn) != consumer) 5206 return; 5207 5208 supplier_pdev = pci_get_domain_bus_and_slot(pci_domain_nr(pdev->bus), 5209 pdev->bus->number, 5210 PCI_DEVFN(PCI_SLOT(pdev->devfn), supplier)); 5211 if (!supplier_pdev || (supplier_pdev->class >> class_shift) != class) { 5212 pci_dev_put(supplier_pdev); 5213 return; 5214 } 5215 5216 if (device_link_add(&pdev->dev, &supplier_pdev->dev, 5217 DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME)) 5218 pci_info(pdev, "D0 power state depends on %s\n", 5219 pci_name(supplier_pdev)); 5220 else 5221 pci_err(pdev, "Cannot enforce power dependency on %s\n", 5222 pci_name(supplier_pdev)); 5223 5224 pm_runtime_allow(&pdev->dev); 5225 pci_dev_put(supplier_pdev); 5226 } 5227 5228 /* 5229 * Create device link for GPUs with integrated HDA controller for streaming 5230 * audio to attached displays. 5231 */ 5232 static void quirk_gpu_hda(struct pci_dev *hda) 5233 { 5234 pci_create_device_link(hda, 1, 0, PCI_BASE_CLASS_DISPLAY, 16); 5235 } 5236 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_ATI, PCI_ANY_ID, 5237 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda); 5238 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMD, PCI_ANY_ID, 5239 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda); 5240 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, 5241 PCI_CLASS_MULTIMEDIA_HD_AUDIO, 8, quirk_gpu_hda); 5242 5243 /* 5244 * Create device link for NVIDIA GPU with integrated USB xHCI Host 5245 * controller to VGA. 5246 */ 5247 static void quirk_gpu_usb(struct pci_dev *usb) 5248 { 5249 pci_create_device_link(usb, 2, 0, PCI_BASE_CLASS_DISPLAY, 16); 5250 } 5251 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, 5252 PCI_CLASS_SERIAL_USB, 8, quirk_gpu_usb); 5253 5254 /* 5255 * Create device link for NVIDIA GPU with integrated Type-C UCSI controller 5256 * to VGA. Currently there is no class code defined for UCSI device over PCI 5257 * so using UNKNOWN class for now and it will be updated when UCSI 5258 * over PCI gets a class code. 5259 */ 5260 #define PCI_CLASS_SERIAL_UNKNOWN 0x0c80 5261 static void quirk_gpu_usb_typec_ucsi(struct pci_dev *ucsi) 5262 { 5263 pci_create_device_link(ucsi, 3, 0, PCI_BASE_CLASS_DISPLAY, 16); 5264 } 5265 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, 5266 PCI_CLASS_SERIAL_UNKNOWN, 8, 5267 quirk_gpu_usb_typec_ucsi); 5268 5269 /* 5270 * Enable the NVIDIA GPU integrated HDA controller if the BIOS left it 5271 * disabled. https://devtalk.nvidia.com/default/topic/1024022 5272 */ 5273 static void quirk_nvidia_hda(struct pci_dev *gpu) 5274 { 5275 u8 hdr_type; 5276 u32 val; 5277 5278 /* There was no integrated HDA controller before MCP89 */ 5279 if (gpu->device < PCI_DEVICE_ID_NVIDIA_GEFORCE_320M) 5280 return; 5281 5282 /* Bit 25 at offset 0x488 enables the HDA controller */ 5283 pci_read_config_dword(gpu, 0x488, &val); 5284 if (val & BIT(25)) 5285 return; 5286 5287 pci_info(gpu, "Enabling HDA controller\n"); 5288 pci_write_config_dword(gpu, 0x488, val | BIT(25)); 5289 5290 /* The GPU becomes a multi-function device when the HDA is enabled */ 5291 pci_read_config_byte(gpu, PCI_HEADER_TYPE, &hdr_type); 5292 gpu->multifunction = !!(hdr_type & 0x80); 5293 } 5294 DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, 5295 PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda); 5296 DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, 5297 PCI_BASE_CLASS_DISPLAY, 16, quirk_nvidia_hda); 5298 5299 /* 5300 * Some IDT switches incorrectly flag an ACS Source Validation error on 5301 * completions for config read requests even though PCIe r4.0, sec 5302 * 6.12.1.1, says that completions are never affected by ACS Source 5303 * Validation. Here's the text of IDT 89H32H8G3-YC, erratum #36: 5304 * 5305 * Item #36 - Downstream port applies ACS Source Validation to Completions 5306 * Section 6.12.1.1 of the PCI Express Base Specification 3.1 states that 5307 * completions are never affected by ACS Source Validation. However, 5308 * completions received by a downstream port of the PCIe switch from a 5309 * device that has not yet captured a PCIe bus number are incorrectly 5310 * dropped by ACS Source Validation by the switch downstream port. 5311 * 5312 * The workaround suggested by IDT is to issue a config write to the 5313 * downstream device before issuing the first config read. This allows the 5314 * downstream device to capture its bus and device numbers (see PCIe r4.0, 5315 * sec 2.2.9), thus avoiding the ACS error on the completion. 5316 * 5317 * However, we don't know when the device is ready to accept the config 5318 * write, so we do config reads until we receive a non-Config Request Retry 5319 * Status, then do the config write. 5320 * 5321 * To avoid hitting the erratum when doing the config reads, we disable ACS 5322 * SV around this process. 5323 */ 5324 int pci_idt_bus_quirk(struct pci_bus *bus, int devfn, u32 *l, int timeout) 5325 { 5326 int pos; 5327 u16 ctrl = 0; 5328 bool found; 5329 struct pci_dev *bridge = bus->self; 5330 5331 pos = pci_find_ext_capability(bridge, PCI_EXT_CAP_ID_ACS); 5332 5333 /* Disable ACS SV before initial config reads */ 5334 if (pos) { 5335 pci_read_config_word(bridge, pos + PCI_ACS_CTRL, &ctrl); 5336 if (ctrl & PCI_ACS_SV) 5337 pci_write_config_word(bridge, pos + PCI_ACS_CTRL, 5338 ctrl & ~PCI_ACS_SV); 5339 } 5340 5341 found = pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout); 5342 5343 /* Write Vendor ID (read-only) so the endpoint latches its bus/dev */ 5344 if (found) 5345 pci_bus_write_config_word(bus, devfn, PCI_VENDOR_ID, 0); 5346 5347 /* Re-enable ACS_SV if it was previously enabled */ 5348 if (ctrl & PCI_ACS_SV) 5349 pci_write_config_word(bridge, pos + PCI_ACS_CTRL, ctrl); 5350 5351 return found; 5352 } 5353 5354 /* 5355 * Microsemi Switchtec NTB uses devfn proxy IDs to move TLPs between 5356 * NT endpoints via the internal switch fabric. These IDs replace the 5357 * originating requestor ID TLPs which access host memory on peer NTB 5358 * ports. Therefore, all proxy IDs must be aliased to the NTB device 5359 * to permit access when the IOMMU is turned on. 5360 */ 5361 static void quirk_switchtec_ntb_dma_alias(struct pci_dev *pdev) 5362 { 5363 void __iomem *mmio; 5364 struct ntb_info_regs __iomem *mmio_ntb; 5365 struct ntb_ctrl_regs __iomem *mmio_ctrl; 5366 u64 partition_map; 5367 u8 partition; 5368 int pp; 5369 5370 if (pci_enable_device(pdev)) { 5371 pci_err(pdev, "Cannot enable Switchtec device\n"); 5372 return; 5373 } 5374 5375 mmio = pci_iomap(pdev, 0, 0); 5376 if (mmio == NULL) { 5377 pci_disable_device(pdev); 5378 pci_err(pdev, "Cannot iomap Switchtec device\n"); 5379 return; 5380 } 5381 5382 pci_info(pdev, "Setting Switchtec proxy ID aliases\n"); 5383 5384 mmio_ntb = mmio + SWITCHTEC_GAS_NTB_OFFSET; 5385 mmio_ctrl = (void __iomem *) mmio_ntb + SWITCHTEC_NTB_REG_CTRL_OFFSET; 5386 5387 partition = ioread8(&mmio_ntb->partition_id); 5388 5389 partition_map = ioread32(&mmio_ntb->ep_map); 5390 partition_map |= ((u64) ioread32(&mmio_ntb->ep_map + 4)) << 32; 5391 partition_map &= ~(1ULL << partition); 5392 5393 for (pp = 0; pp < (sizeof(partition_map) * 8); pp++) { 5394 struct ntb_ctrl_regs __iomem *mmio_peer_ctrl; 5395 u32 table_sz = 0; 5396 int te; 5397 5398 if (!(partition_map & (1ULL << pp))) 5399 continue; 5400 5401 pci_dbg(pdev, "Processing partition %d\n", pp); 5402 5403 mmio_peer_ctrl = &mmio_ctrl[pp]; 5404 5405 table_sz = ioread16(&mmio_peer_ctrl->req_id_table_size); 5406 if (!table_sz) { 5407 pci_warn(pdev, "Partition %d table_sz 0\n", pp); 5408 continue; 5409 } 5410 5411 if (table_sz > 512) { 5412 pci_warn(pdev, 5413 "Invalid Switchtec partition %d table_sz %d\n", 5414 pp, table_sz); 5415 continue; 5416 } 5417 5418 for (te = 0; te < table_sz; te++) { 5419 u32 rid_entry; 5420 u8 devfn; 5421 5422 rid_entry = ioread32(&mmio_peer_ctrl->req_id_table[te]); 5423 devfn = (rid_entry >> 1) & 0xFF; 5424 pci_dbg(pdev, 5425 "Aliasing Partition %d Proxy ID %02x.%d\n", 5426 pp, PCI_SLOT(devfn), PCI_FUNC(devfn)); 5427 pci_add_dma_alias(pdev, devfn, 1); 5428 } 5429 } 5430 5431 pci_iounmap(pdev, mmio); 5432 pci_disable_device(pdev); 5433 } 5434 #define SWITCHTEC_QUIRK(vid) \ 5435 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_MICROSEMI, vid, \ 5436 PCI_CLASS_BRIDGE_OTHER, 8, quirk_switchtec_ntb_dma_alias) 5437 5438 SWITCHTEC_QUIRK(0x8531); /* PFX 24xG3 */ 5439 SWITCHTEC_QUIRK(0x8532); /* PFX 32xG3 */ 5440 SWITCHTEC_QUIRK(0x8533); /* PFX 48xG3 */ 5441 SWITCHTEC_QUIRK(0x8534); /* PFX 64xG3 */ 5442 SWITCHTEC_QUIRK(0x8535); /* PFX 80xG3 */ 5443 SWITCHTEC_QUIRK(0x8536); /* PFX 96xG3 */ 5444 SWITCHTEC_QUIRK(0x8541); /* PSX 24xG3 */ 5445 SWITCHTEC_QUIRK(0x8542); /* PSX 32xG3 */ 5446 SWITCHTEC_QUIRK(0x8543); /* PSX 48xG3 */ 5447 SWITCHTEC_QUIRK(0x8544); /* PSX 64xG3 */ 5448 SWITCHTEC_QUIRK(0x8545); /* PSX 80xG3 */ 5449 SWITCHTEC_QUIRK(0x8546); /* PSX 96xG3 */ 5450 SWITCHTEC_QUIRK(0x8551); /* PAX 24XG3 */ 5451 SWITCHTEC_QUIRK(0x8552); /* PAX 32XG3 */ 5452 SWITCHTEC_QUIRK(0x8553); /* PAX 48XG3 */ 5453 SWITCHTEC_QUIRK(0x8554); /* PAX 64XG3 */ 5454 SWITCHTEC_QUIRK(0x8555); /* PAX 80XG3 */ 5455 SWITCHTEC_QUIRK(0x8556); /* PAX 96XG3 */ 5456 SWITCHTEC_QUIRK(0x8561); /* PFXL 24XG3 */ 5457 SWITCHTEC_QUIRK(0x8562); /* PFXL 32XG3 */ 5458 SWITCHTEC_QUIRK(0x8563); /* PFXL 48XG3 */ 5459 SWITCHTEC_QUIRK(0x8564); /* PFXL 64XG3 */ 5460 SWITCHTEC_QUIRK(0x8565); /* PFXL 80XG3 */ 5461 SWITCHTEC_QUIRK(0x8566); /* PFXL 96XG3 */ 5462 SWITCHTEC_QUIRK(0x8571); /* PFXI 24XG3 */ 5463 SWITCHTEC_QUIRK(0x8572); /* PFXI 32XG3 */ 5464 SWITCHTEC_QUIRK(0x8573); /* PFXI 48XG3 */ 5465 SWITCHTEC_QUIRK(0x8574); /* PFXI 64XG3 */ 5466 SWITCHTEC_QUIRK(0x8575); /* PFXI 80XG3 */ 5467 SWITCHTEC_QUIRK(0x8576); /* PFXI 96XG3 */ 5468 SWITCHTEC_QUIRK(0x4000); /* PFX 100XG4 */ 5469 SWITCHTEC_QUIRK(0x4084); /* PFX 84XG4 */ 5470 SWITCHTEC_QUIRK(0x4068); /* PFX 68XG4 */ 5471 SWITCHTEC_QUIRK(0x4052); /* PFX 52XG4 */ 5472 SWITCHTEC_QUIRK(0x4036); /* PFX 36XG4 */ 5473 SWITCHTEC_QUIRK(0x4028); /* PFX 28XG4 */ 5474 SWITCHTEC_QUIRK(0x4100); /* PSX 100XG4 */ 5475 SWITCHTEC_QUIRK(0x4184); /* PSX 84XG4 */ 5476 SWITCHTEC_QUIRK(0x4168); /* PSX 68XG4 */ 5477 SWITCHTEC_QUIRK(0x4152); /* PSX 52XG4 */ 5478 SWITCHTEC_QUIRK(0x4136); /* PSX 36XG4 */ 5479 SWITCHTEC_QUIRK(0x4128); /* PSX 28XG4 */ 5480 SWITCHTEC_QUIRK(0x4200); /* PAX 100XG4 */ 5481 SWITCHTEC_QUIRK(0x4284); /* PAX 84XG4 */ 5482 SWITCHTEC_QUIRK(0x4268); /* PAX 68XG4 */ 5483 SWITCHTEC_QUIRK(0x4252); /* PAX 52XG4 */ 5484 SWITCHTEC_QUIRK(0x4236); /* PAX 36XG4 */ 5485 SWITCHTEC_QUIRK(0x4228); /* PAX 28XG4 */ 5486 5487 /* 5488 * The PLX NTB uses devfn proxy IDs to move TLPs between NT endpoints. 5489 * These IDs are used to forward responses to the originator on the other 5490 * side of the NTB. Alias all possible IDs to the NTB to permit access when 5491 * the IOMMU is turned on. 5492 */ 5493 static void quirk_plx_ntb_dma_alias(struct pci_dev *pdev) 5494 { 5495 pci_info(pdev, "Setting PLX NTB proxy ID aliases\n"); 5496 /* PLX NTB may use all 256 devfns */ 5497 pci_add_dma_alias(pdev, 0, 256); 5498 } 5499 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b0, quirk_plx_ntb_dma_alias); 5500 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_PLX, 0x87b1, quirk_plx_ntb_dma_alias); 5501 5502 /* 5503 * On Lenovo Thinkpad P50 SKUs with a Nvidia Quadro M1000M, the BIOS does 5504 * not always reset the secondary Nvidia GPU between reboots if the system 5505 * is configured to use Hybrid Graphics mode. This results in the GPU 5506 * being left in whatever state it was in during the *previous* boot, which 5507 * causes spurious interrupts from the GPU, which in turn causes us to 5508 * disable the wrong IRQ and end up breaking the touchpad. Unsurprisingly, 5509 * this also completely breaks nouveau. 5510 * 5511 * Luckily, it seems a simple reset of the Nvidia GPU brings it back to a 5512 * clean state and fixes all these issues. 5513 * 5514 * When the machine is configured in Dedicated display mode, the issue 5515 * doesn't occur. Fortunately the GPU advertises NoReset+ when in this 5516 * mode, so we can detect that and avoid resetting it. 5517 */ 5518 static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev) 5519 { 5520 void __iomem *map; 5521 int ret; 5522 5523 if (pdev->subsystem_vendor != PCI_VENDOR_ID_LENOVO || 5524 pdev->subsystem_device != 0x222e || 5525 !pdev->reset_fn) 5526 return; 5527 5528 if (pci_enable_device_mem(pdev)) 5529 return; 5530 5531 /* 5532 * Based on nvkm_device_ctor() in 5533 * drivers/gpu/drm/nouveau/nvkm/engine/device/base.c 5534 */ 5535 map = pci_iomap(pdev, 0, 0x23000); 5536 if (!map) { 5537 pci_err(pdev, "Can't map MMIO space\n"); 5538 goto out_disable; 5539 } 5540 5541 /* 5542 * Make sure the GPU looks like it's been POSTed before resetting 5543 * it. 5544 */ 5545 if (ioread32(map + 0x2240c) & 0x2) { 5546 pci_info(pdev, FW_BUG "GPU left initialized by EFI, resetting\n"); 5547 ret = pci_reset_bus(pdev); 5548 if (ret < 0) 5549 pci_err(pdev, "Failed to reset GPU: %d\n", ret); 5550 } 5551 5552 iounmap(map); 5553 out_disable: 5554 pci_disable_device(pdev); 5555 } 5556 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_NVIDIA, 0x13b1, 5557 PCI_CLASS_DISPLAY_VGA, 8, 5558 quirk_reset_lenovo_thinkpad_p50_nvgpu); 5559 5560 /* 5561 * Device [1b21:2142] 5562 * When in D0, PME# doesn't get asserted when plugging USB 3.0 device. 5563 */ 5564 static void pci_fixup_no_d0_pme(struct pci_dev *dev) 5565 { 5566 pci_info(dev, "PME# does not work under D0, disabling it\n"); 5567 dev->pme_support &= ~(PCI_PM_CAP_PME_D0 >> PCI_PM_CAP_PME_SHIFT); 5568 } 5569 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme); 5570