1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * PCI detection and setup code 4 */ 5 6 #include <linux/kernel.h> 7 #include <linux/delay.h> 8 #include <linux/init.h> 9 #include <linux/pci.h> 10 #include <linux/of_device.h> 11 #include <linux/of_pci.h> 12 #include <linux/pci_hotplug.h> 13 #include <linux/slab.h> 14 #include <linux/module.h> 15 #include <linux/cpumask.h> 16 #include <linux/aer.h> 17 #include <linux/acpi.h> 18 #include <linux/hypervisor.h> 19 #include <linux/irqdomain.h> 20 #include <linux/pm_runtime.h> 21 #include "pci.h" 22 23 #define CARDBUS_LATENCY_TIMER 176 /* secondary latency timer */ 24 #define CARDBUS_RESERVE_BUSNR 3 25 26 static struct resource busn_resource = { 27 .name = "PCI busn", 28 .start = 0, 29 .end = 255, 30 .flags = IORESOURCE_BUS, 31 }; 32 33 /* Ugh. Need to stop exporting this to modules. */ 34 LIST_HEAD(pci_root_buses); 35 EXPORT_SYMBOL(pci_root_buses); 36 37 static LIST_HEAD(pci_domain_busn_res_list); 38 39 struct pci_domain_busn_res { 40 struct list_head list; 41 struct resource res; 42 int domain_nr; 43 }; 44 45 static struct resource *get_pci_domain_busn_res(int domain_nr) 46 { 47 struct pci_domain_busn_res *r; 48 49 list_for_each_entry(r, &pci_domain_busn_res_list, list) 50 if (r->domain_nr == domain_nr) 51 return &r->res; 52 53 r = kzalloc(sizeof(*r), GFP_KERNEL); 54 if (!r) 55 return NULL; 56 57 r->domain_nr = domain_nr; 58 r->res.start = 0; 59 r->res.end = 0xff; 60 r->res.flags = IORESOURCE_BUS | IORESOURCE_PCI_FIXED; 61 62 list_add_tail(&r->list, &pci_domain_busn_res_list); 63 64 return &r->res; 65 } 66 67 static int find_anything(struct device *dev, const void *data) 68 { 69 return 1; 70 } 71 72 /* 73 * Some device drivers need know if PCI is initiated. 74 * Basically, we think PCI is not initiated when there 75 * is no device to be found on the pci_bus_type. 76 */ 77 int no_pci_devices(void) 78 { 79 struct device *dev; 80 int no_devices; 81 82 dev = bus_find_device(&pci_bus_type, NULL, NULL, find_anything); 83 no_devices = (dev == NULL); 84 put_device(dev); 85 return no_devices; 86 } 87 EXPORT_SYMBOL(no_pci_devices); 88 89 /* 90 * PCI Bus Class 91 */ 92 static void release_pcibus_dev(struct device *dev) 93 { 94 struct pci_bus *pci_bus = to_pci_bus(dev); 95 96 put_device(pci_bus->bridge); 97 pci_bus_remove_resources(pci_bus); 98 pci_release_bus_of_node(pci_bus); 99 kfree(pci_bus); 100 } 101 102 static struct class pcibus_class = { 103 .name = "pci_bus", 104 .dev_release = &release_pcibus_dev, 105 .dev_groups = pcibus_groups, 106 }; 107 108 static int __init pcibus_class_init(void) 109 { 110 return class_register(&pcibus_class); 111 } 112 postcore_initcall(pcibus_class_init); 113 114 static u64 pci_size(u64 base, u64 maxbase, u64 mask) 115 { 116 u64 size = mask & maxbase; /* Find the significant bits */ 117 if (!size) 118 return 0; 119 120 /* 121 * Get the lowest of them to find the decode size, and from that 122 * the extent. 123 */ 124 size = size & ~(size-1); 125 126 /* 127 * base == maxbase can be valid only if the BAR has already been 128 * programmed with all 1s. 129 */ 130 if (base == maxbase && ((base | (size - 1)) & mask) != mask) 131 return 0; 132 133 return size; 134 } 135 136 static inline unsigned long decode_bar(struct pci_dev *dev, u32 bar) 137 { 138 u32 mem_type; 139 unsigned long flags; 140 141 if ((bar & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { 142 flags = bar & ~PCI_BASE_ADDRESS_IO_MASK; 143 flags |= IORESOURCE_IO; 144 return flags; 145 } 146 147 flags = bar & ~PCI_BASE_ADDRESS_MEM_MASK; 148 flags |= IORESOURCE_MEM; 149 if (flags & PCI_BASE_ADDRESS_MEM_PREFETCH) 150 flags |= IORESOURCE_PREFETCH; 151 152 mem_type = bar & PCI_BASE_ADDRESS_MEM_TYPE_MASK; 153 switch (mem_type) { 154 case PCI_BASE_ADDRESS_MEM_TYPE_32: 155 break; 156 case PCI_BASE_ADDRESS_MEM_TYPE_1M: 157 /* 1M mem BAR treated as 32-bit BAR */ 158 break; 159 case PCI_BASE_ADDRESS_MEM_TYPE_64: 160 flags |= IORESOURCE_MEM_64; 161 break; 162 default: 163 /* mem unknown type treated as 32-bit BAR */ 164 break; 165 } 166 return flags; 167 } 168 169 #define PCI_COMMAND_DECODE_ENABLE (PCI_COMMAND_MEMORY | PCI_COMMAND_IO) 170 171 /** 172 * pci_read_base - Read a PCI BAR 173 * @dev: the PCI device 174 * @type: type of the BAR 175 * @res: resource buffer to be filled in 176 * @pos: BAR position in the config space 177 * 178 * Returns 1 if the BAR is 64-bit, or 0 if 32-bit. 179 */ 180 int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, 181 struct resource *res, unsigned int pos) 182 { 183 u32 l = 0, sz = 0, mask; 184 u64 l64, sz64, mask64; 185 u16 orig_cmd; 186 struct pci_bus_region region, inverted_region; 187 188 mask = type ? PCI_ROM_ADDRESS_MASK : ~0; 189 190 /* No printks while decoding is disabled! */ 191 if (!dev->mmio_always_on) { 192 pci_read_config_word(dev, PCI_COMMAND, &orig_cmd); 193 if (orig_cmd & PCI_COMMAND_DECODE_ENABLE) { 194 pci_write_config_word(dev, PCI_COMMAND, 195 orig_cmd & ~PCI_COMMAND_DECODE_ENABLE); 196 } 197 } 198 199 res->name = pci_name(dev); 200 201 pci_read_config_dword(dev, pos, &l); 202 pci_write_config_dword(dev, pos, l | mask); 203 pci_read_config_dword(dev, pos, &sz); 204 pci_write_config_dword(dev, pos, l); 205 206 /* 207 * All bits set in sz means the device isn't working properly. 208 * If the BAR isn't implemented, all bits must be 0. If it's a 209 * memory BAR or a ROM, bit 0 must be clear; if it's an io BAR, bit 210 * 1 must be clear. 211 */ 212 if (sz == 0xffffffff) 213 sz = 0; 214 215 /* 216 * I don't know how l can have all bits set. Copied from old code. 217 * Maybe it fixes a bug on some ancient platform. 218 */ 219 if (l == 0xffffffff) 220 l = 0; 221 222 if (type == pci_bar_unknown) { 223 res->flags = decode_bar(dev, l); 224 res->flags |= IORESOURCE_SIZEALIGN; 225 if (res->flags & IORESOURCE_IO) { 226 l64 = l & PCI_BASE_ADDRESS_IO_MASK; 227 sz64 = sz & PCI_BASE_ADDRESS_IO_MASK; 228 mask64 = PCI_BASE_ADDRESS_IO_MASK & (u32)IO_SPACE_LIMIT; 229 } else { 230 l64 = l & PCI_BASE_ADDRESS_MEM_MASK; 231 sz64 = sz & PCI_BASE_ADDRESS_MEM_MASK; 232 mask64 = (u32)PCI_BASE_ADDRESS_MEM_MASK; 233 } 234 } else { 235 if (l & PCI_ROM_ADDRESS_ENABLE) 236 res->flags |= IORESOURCE_ROM_ENABLE; 237 l64 = l & PCI_ROM_ADDRESS_MASK; 238 sz64 = sz & PCI_ROM_ADDRESS_MASK; 239 mask64 = PCI_ROM_ADDRESS_MASK; 240 } 241 242 if (res->flags & IORESOURCE_MEM_64) { 243 pci_read_config_dword(dev, pos + 4, &l); 244 pci_write_config_dword(dev, pos + 4, ~0); 245 pci_read_config_dword(dev, pos + 4, &sz); 246 pci_write_config_dword(dev, pos + 4, l); 247 248 l64 |= ((u64)l << 32); 249 sz64 |= ((u64)sz << 32); 250 mask64 |= ((u64)~0 << 32); 251 } 252 253 if (!dev->mmio_always_on && (orig_cmd & PCI_COMMAND_DECODE_ENABLE)) 254 pci_write_config_word(dev, PCI_COMMAND, orig_cmd); 255 256 if (!sz64) 257 goto fail; 258 259 sz64 = pci_size(l64, sz64, mask64); 260 if (!sz64) { 261 pci_info(dev, FW_BUG "reg 0x%x: invalid BAR (can't size)\n", 262 pos); 263 goto fail; 264 } 265 266 if (res->flags & IORESOURCE_MEM_64) { 267 if ((sizeof(pci_bus_addr_t) < 8 || sizeof(resource_size_t) < 8) 268 && sz64 > 0x100000000ULL) { 269 res->flags |= IORESOURCE_UNSET | IORESOURCE_DISABLED; 270 res->start = 0; 271 res->end = 0; 272 pci_err(dev, "reg 0x%x: can't handle BAR larger than 4GB (size %#010llx)\n", 273 pos, (unsigned long long)sz64); 274 goto out; 275 } 276 277 if ((sizeof(pci_bus_addr_t) < 8) && l) { 278 /* Above 32-bit boundary; try to reallocate */ 279 res->flags |= IORESOURCE_UNSET; 280 res->start = 0; 281 res->end = sz64 - 1; 282 pci_info(dev, "reg 0x%x: can't handle BAR above 4GB (bus address %#010llx)\n", 283 pos, (unsigned long long)l64); 284 goto out; 285 } 286 } 287 288 region.start = l64; 289 region.end = l64 + sz64 - 1; 290 291 pcibios_bus_to_resource(dev->bus, res, ®ion); 292 pcibios_resource_to_bus(dev->bus, &inverted_region, res); 293 294 /* 295 * If "A" is a BAR value (a bus address), "bus_to_resource(A)" is 296 * the corresponding resource address (the physical address used by 297 * the CPU. Converting that resource address back to a bus address 298 * should yield the original BAR value: 299 * 300 * resource_to_bus(bus_to_resource(A)) == A 301 * 302 * If it doesn't, CPU accesses to "bus_to_resource(A)" will not 303 * be claimed by the device. 304 */ 305 if (inverted_region.start != region.start) { 306 res->flags |= IORESOURCE_UNSET; 307 res->start = 0; 308 res->end = region.end - region.start; 309 pci_info(dev, "reg 0x%x: initial BAR value %#010llx invalid\n", 310 pos, (unsigned long long)region.start); 311 } 312 313 goto out; 314 315 316 fail: 317 res->flags = 0; 318 out: 319 if (res->flags) 320 pci_info(dev, "reg 0x%x: %pR\n", pos, res); 321 322 return (res->flags & IORESOURCE_MEM_64) ? 1 : 0; 323 } 324 325 static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom) 326 { 327 unsigned int pos, reg; 328 329 if (dev->non_compliant_bars) 330 return; 331 332 /* Per PCIe r4.0, sec 9.3.4.1.11, the VF BARs are all RO Zero */ 333 if (dev->is_virtfn) 334 return; 335 336 for (pos = 0; pos < howmany; pos++) { 337 struct resource *res = &dev->resource[pos]; 338 reg = PCI_BASE_ADDRESS_0 + (pos << 2); 339 pos += __pci_read_base(dev, pci_bar_unknown, res, reg); 340 } 341 342 if (rom) { 343 struct resource *res = &dev->resource[PCI_ROM_RESOURCE]; 344 dev->rom_base_reg = rom; 345 res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH | 346 IORESOURCE_READONLY | IORESOURCE_SIZEALIGN; 347 __pci_read_base(dev, pci_bar_mem32, res, rom); 348 } 349 } 350 351 static void pci_read_bridge_windows(struct pci_dev *bridge) 352 { 353 u16 io; 354 u32 pmem, tmp; 355 356 pci_read_config_word(bridge, PCI_IO_BASE, &io); 357 if (!io) { 358 pci_write_config_word(bridge, PCI_IO_BASE, 0xe0f0); 359 pci_read_config_word(bridge, PCI_IO_BASE, &io); 360 pci_write_config_word(bridge, PCI_IO_BASE, 0x0); 361 } 362 if (io) 363 bridge->io_window = 1; 364 365 /* 366 * DECchip 21050 pass 2 errata: the bridge may miss an address 367 * disconnect boundary by one PCI data phase. Workaround: do not 368 * use prefetching on this device. 369 */ 370 if (bridge->vendor == PCI_VENDOR_ID_DEC && bridge->device == 0x0001) 371 return; 372 373 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem); 374 if (!pmem) { 375 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 376 0xffe0fff0); 377 pci_read_config_dword(bridge, PCI_PREF_MEMORY_BASE, &pmem); 378 pci_write_config_dword(bridge, PCI_PREF_MEMORY_BASE, 0x0); 379 } 380 if (!pmem) 381 return; 382 383 bridge->pref_window = 1; 384 385 if ((pmem & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { 386 387 /* 388 * Bridge claims to have a 64-bit prefetchable memory 389 * window; verify that the upper bits are actually 390 * writable. 391 */ 392 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &pmem); 393 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, 394 0xffffffff); 395 pci_read_config_dword(bridge, PCI_PREF_BASE_UPPER32, &tmp); 396 pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, pmem); 397 if (tmp) 398 bridge->pref_64_window = 1; 399 } 400 } 401 402 static void pci_read_bridge_io(struct pci_bus *child) 403 { 404 struct pci_dev *dev = child->self; 405 u8 io_base_lo, io_limit_lo; 406 unsigned long io_mask, io_granularity, base, limit; 407 struct pci_bus_region region; 408 struct resource *res; 409 410 io_mask = PCI_IO_RANGE_MASK; 411 io_granularity = 0x1000; 412 if (dev->io_window_1k) { 413 /* Support 1K I/O space granularity */ 414 io_mask = PCI_IO_1K_RANGE_MASK; 415 io_granularity = 0x400; 416 } 417 418 res = child->resource[0]; 419 pci_read_config_byte(dev, PCI_IO_BASE, &io_base_lo); 420 pci_read_config_byte(dev, PCI_IO_LIMIT, &io_limit_lo); 421 base = (io_base_lo & io_mask) << 8; 422 limit = (io_limit_lo & io_mask) << 8; 423 424 if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) { 425 u16 io_base_hi, io_limit_hi; 426 427 pci_read_config_word(dev, PCI_IO_BASE_UPPER16, &io_base_hi); 428 pci_read_config_word(dev, PCI_IO_LIMIT_UPPER16, &io_limit_hi); 429 base |= ((unsigned long) io_base_hi << 16); 430 limit |= ((unsigned long) io_limit_hi << 16); 431 } 432 433 if (base <= limit) { 434 res->flags = (io_base_lo & PCI_IO_RANGE_TYPE_MASK) | IORESOURCE_IO; 435 region.start = base; 436 region.end = limit + io_granularity - 1; 437 pcibios_bus_to_resource(dev->bus, res, ®ion); 438 pci_info(dev, " bridge window %pR\n", res); 439 } 440 } 441 442 static void pci_read_bridge_mmio(struct pci_bus *child) 443 { 444 struct pci_dev *dev = child->self; 445 u16 mem_base_lo, mem_limit_lo; 446 unsigned long base, limit; 447 struct pci_bus_region region; 448 struct resource *res; 449 450 res = child->resource[1]; 451 pci_read_config_word(dev, PCI_MEMORY_BASE, &mem_base_lo); 452 pci_read_config_word(dev, PCI_MEMORY_LIMIT, &mem_limit_lo); 453 base = ((unsigned long) mem_base_lo & PCI_MEMORY_RANGE_MASK) << 16; 454 limit = ((unsigned long) mem_limit_lo & PCI_MEMORY_RANGE_MASK) << 16; 455 if (base <= limit) { 456 res->flags = (mem_base_lo & PCI_MEMORY_RANGE_TYPE_MASK) | IORESOURCE_MEM; 457 region.start = base; 458 region.end = limit + 0xfffff; 459 pcibios_bus_to_resource(dev->bus, res, ®ion); 460 pci_info(dev, " bridge window %pR\n", res); 461 } 462 } 463 464 static void pci_read_bridge_mmio_pref(struct pci_bus *child) 465 { 466 struct pci_dev *dev = child->self; 467 u16 mem_base_lo, mem_limit_lo; 468 u64 base64, limit64; 469 pci_bus_addr_t base, limit; 470 struct pci_bus_region region; 471 struct resource *res; 472 473 res = child->resource[2]; 474 pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo); 475 pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo); 476 base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16; 477 limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16; 478 479 if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) { 480 u32 mem_base_hi, mem_limit_hi; 481 482 pci_read_config_dword(dev, PCI_PREF_BASE_UPPER32, &mem_base_hi); 483 pci_read_config_dword(dev, PCI_PREF_LIMIT_UPPER32, &mem_limit_hi); 484 485 /* 486 * Some bridges set the base > limit by default, and some 487 * (broken) BIOSes do not initialize them. If we find 488 * this, just assume they are not being used. 489 */ 490 if (mem_base_hi <= mem_limit_hi) { 491 base64 |= (u64) mem_base_hi << 32; 492 limit64 |= (u64) mem_limit_hi << 32; 493 } 494 } 495 496 base = (pci_bus_addr_t) base64; 497 limit = (pci_bus_addr_t) limit64; 498 499 if (base != base64) { 500 pci_err(dev, "can't handle bridge window above 4GB (bus address %#010llx)\n", 501 (unsigned long long) base64); 502 return; 503 } 504 505 if (base <= limit) { 506 res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) | 507 IORESOURCE_MEM | IORESOURCE_PREFETCH; 508 if (res->flags & PCI_PREF_RANGE_TYPE_64) 509 res->flags |= IORESOURCE_MEM_64; 510 region.start = base; 511 region.end = limit + 0xfffff; 512 pcibios_bus_to_resource(dev->bus, res, ®ion); 513 pci_info(dev, " bridge window %pR\n", res); 514 } 515 } 516 517 void pci_read_bridge_bases(struct pci_bus *child) 518 { 519 struct pci_dev *dev = child->self; 520 struct resource *res; 521 int i; 522 523 if (pci_is_root_bus(child)) /* It's a host bus, nothing to read */ 524 return; 525 526 pci_info(dev, "PCI bridge to %pR%s\n", 527 &child->busn_res, 528 dev->transparent ? " (subtractive decode)" : ""); 529 530 pci_bus_remove_resources(child); 531 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) 532 child->resource[i] = &dev->resource[PCI_BRIDGE_RESOURCES+i]; 533 534 pci_read_bridge_io(child); 535 pci_read_bridge_mmio(child); 536 pci_read_bridge_mmio_pref(child); 537 538 if (dev->transparent) { 539 pci_bus_for_each_resource(child->parent, res, i) { 540 if (res && res->flags) { 541 pci_bus_add_resource(child, res, 542 PCI_SUBTRACTIVE_DECODE); 543 pci_info(dev, " bridge window %pR (subtractive decode)\n", 544 res); 545 } 546 } 547 } 548 } 549 550 static struct pci_bus *pci_alloc_bus(struct pci_bus *parent) 551 { 552 struct pci_bus *b; 553 554 b = kzalloc(sizeof(*b), GFP_KERNEL); 555 if (!b) 556 return NULL; 557 558 INIT_LIST_HEAD(&b->node); 559 INIT_LIST_HEAD(&b->children); 560 INIT_LIST_HEAD(&b->devices); 561 INIT_LIST_HEAD(&b->slots); 562 INIT_LIST_HEAD(&b->resources); 563 b->max_bus_speed = PCI_SPEED_UNKNOWN; 564 b->cur_bus_speed = PCI_SPEED_UNKNOWN; 565 #ifdef CONFIG_PCI_DOMAINS_GENERIC 566 if (parent) 567 b->domain_nr = parent->domain_nr; 568 #endif 569 return b; 570 } 571 572 static void devm_pci_release_host_bridge_dev(struct device *dev) 573 { 574 struct pci_host_bridge *bridge = to_pci_host_bridge(dev); 575 576 if (bridge->release_fn) 577 bridge->release_fn(bridge); 578 579 pci_free_resource_list(&bridge->windows); 580 } 581 582 static void pci_release_host_bridge_dev(struct device *dev) 583 { 584 devm_pci_release_host_bridge_dev(dev); 585 kfree(to_pci_host_bridge(dev)); 586 } 587 588 static void pci_init_host_bridge(struct pci_host_bridge *bridge) 589 { 590 INIT_LIST_HEAD(&bridge->windows); 591 INIT_LIST_HEAD(&bridge->dma_ranges); 592 593 /* 594 * We assume we can manage these PCIe features. Some systems may 595 * reserve these for use by the platform itself, e.g., an ACPI BIOS 596 * may implement its own AER handling and use _OSC to prevent the 597 * OS from interfering. 598 */ 599 bridge->native_aer = 1; 600 bridge->native_pcie_hotplug = 1; 601 bridge->native_shpc_hotplug = 1; 602 bridge->native_pme = 1; 603 bridge->native_ltr = 1; 604 } 605 606 struct pci_host_bridge *pci_alloc_host_bridge(size_t priv) 607 { 608 struct pci_host_bridge *bridge; 609 610 bridge = kzalloc(sizeof(*bridge) + priv, GFP_KERNEL); 611 if (!bridge) 612 return NULL; 613 614 pci_init_host_bridge(bridge); 615 bridge->dev.release = pci_release_host_bridge_dev; 616 617 return bridge; 618 } 619 EXPORT_SYMBOL(pci_alloc_host_bridge); 620 621 struct pci_host_bridge *devm_pci_alloc_host_bridge(struct device *dev, 622 size_t priv) 623 { 624 struct pci_host_bridge *bridge; 625 626 bridge = devm_kzalloc(dev, sizeof(*bridge) + priv, GFP_KERNEL); 627 if (!bridge) 628 return NULL; 629 630 pci_init_host_bridge(bridge); 631 bridge->dev.release = devm_pci_release_host_bridge_dev; 632 633 return bridge; 634 } 635 EXPORT_SYMBOL(devm_pci_alloc_host_bridge); 636 637 void pci_free_host_bridge(struct pci_host_bridge *bridge) 638 { 639 pci_free_resource_list(&bridge->windows); 640 pci_free_resource_list(&bridge->dma_ranges); 641 642 kfree(bridge); 643 } 644 EXPORT_SYMBOL(pci_free_host_bridge); 645 646 static const unsigned char pcix_bus_speed[] = { 647 PCI_SPEED_UNKNOWN, /* 0 */ 648 PCI_SPEED_66MHz_PCIX, /* 1 */ 649 PCI_SPEED_100MHz_PCIX, /* 2 */ 650 PCI_SPEED_133MHz_PCIX, /* 3 */ 651 PCI_SPEED_UNKNOWN, /* 4 */ 652 PCI_SPEED_66MHz_PCIX_ECC, /* 5 */ 653 PCI_SPEED_100MHz_PCIX_ECC, /* 6 */ 654 PCI_SPEED_133MHz_PCIX_ECC, /* 7 */ 655 PCI_SPEED_UNKNOWN, /* 8 */ 656 PCI_SPEED_66MHz_PCIX_266, /* 9 */ 657 PCI_SPEED_100MHz_PCIX_266, /* A */ 658 PCI_SPEED_133MHz_PCIX_266, /* B */ 659 PCI_SPEED_UNKNOWN, /* C */ 660 PCI_SPEED_66MHz_PCIX_533, /* D */ 661 PCI_SPEED_100MHz_PCIX_533, /* E */ 662 PCI_SPEED_133MHz_PCIX_533 /* F */ 663 }; 664 665 const unsigned char pcie_link_speed[] = { 666 PCI_SPEED_UNKNOWN, /* 0 */ 667 PCIE_SPEED_2_5GT, /* 1 */ 668 PCIE_SPEED_5_0GT, /* 2 */ 669 PCIE_SPEED_8_0GT, /* 3 */ 670 PCIE_SPEED_16_0GT, /* 4 */ 671 PCI_SPEED_UNKNOWN, /* 5 */ 672 PCI_SPEED_UNKNOWN, /* 6 */ 673 PCI_SPEED_UNKNOWN, /* 7 */ 674 PCI_SPEED_UNKNOWN, /* 8 */ 675 PCI_SPEED_UNKNOWN, /* 9 */ 676 PCI_SPEED_UNKNOWN, /* A */ 677 PCI_SPEED_UNKNOWN, /* B */ 678 PCI_SPEED_UNKNOWN, /* C */ 679 PCI_SPEED_UNKNOWN, /* D */ 680 PCI_SPEED_UNKNOWN, /* E */ 681 PCI_SPEED_UNKNOWN /* F */ 682 }; 683 684 void pcie_update_link_speed(struct pci_bus *bus, u16 linksta) 685 { 686 bus->cur_bus_speed = pcie_link_speed[linksta & PCI_EXP_LNKSTA_CLS]; 687 } 688 EXPORT_SYMBOL_GPL(pcie_update_link_speed); 689 690 static unsigned char agp_speeds[] = { 691 AGP_UNKNOWN, 692 AGP_1X, 693 AGP_2X, 694 AGP_4X, 695 AGP_8X 696 }; 697 698 static enum pci_bus_speed agp_speed(int agp3, int agpstat) 699 { 700 int index = 0; 701 702 if (agpstat & 4) 703 index = 3; 704 else if (agpstat & 2) 705 index = 2; 706 else if (agpstat & 1) 707 index = 1; 708 else 709 goto out; 710 711 if (agp3) { 712 index += 2; 713 if (index == 5) 714 index = 0; 715 } 716 717 out: 718 return agp_speeds[index]; 719 } 720 721 static void pci_set_bus_speed(struct pci_bus *bus) 722 { 723 struct pci_dev *bridge = bus->self; 724 int pos; 725 726 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP); 727 if (!pos) 728 pos = pci_find_capability(bridge, PCI_CAP_ID_AGP3); 729 if (pos) { 730 u32 agpstat, agpcmd; 731 732 pci_read_config_dword(bridge, pos + PCI_AGP_STATUS, &agpstat); 733 bus->max_bus_speed = agp_speed(agpstat & 8, agpstat & 7); 734 735 pci_read_config_dword(bridge, pos + PCI_AGP_COMMAND, &agpcmd); 736 bus->cur_bus_speed = agp_speed(agpstat & 8, agpcmd & 7); 737 } 738 739 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); 740 if (pos) { 741 u16 status; 742 enum pci_bus_speed max; 743 744 pci_read_config_word(bridge, pos + PCI_X_BRIDGE_SSTATUS, 745 &status); 746 747 if (status & PCI_X_SSTATUS_533MHZ) { 748 max = PCI_SPEED_133MHz_PCIX_533; 749 } else if (status & PCI_X_SSTATUS_266MHZ) { 750 max = PCI_SPEED_133MHz_PCIX_266; 751 } else if (status & PCI_X_SSTATUS_133MHZ) { 752 if ((status & PCI_X_SSTATUS_VERS) == PCI_X_SSTATUS_V2) 753 max = PCI_SPEED_133MHz_PCIX_ECC; 754 else 755 max = PCI_SPEED_133MHz_PCIX; 756 } else { 757 max = PCI_SPEED_66MHz_PCIX; 758 } 759 760 bus->max_bus_speed = max; 761 bus->cur_bus_speed = pcix_bus_speed[ 762 (status & PCI_X_SSTATUS_FREQ) >> 6]; 763 764 return; 765 } 766 767 if (pci_is_pcie(bridge)) { 768 u32 linkcap; 769 u16 linksta; 770 771 pcie_capability_read_dword(bridge, PCI_EXP_LNKCAP, &linkcap); 772 bus->max_bus_speed = pcie_link_speed[linkcap & PCI_EXP_LNKCAP_SLS]; 773 bridge->link_active_reporting = !!(linkcap & PCI_EXP_LNKCAP_DLLLARC); 774 775 pcie_capability_read_word(bridge, PCI_EXP_LNKSTA, &linksta); 776 pcie_update_link_speed(bus, linksta); 777 } 778 } 779 780 static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus) 781 { 782 struct irq_domain *d; 783 784 /* 785 * Any firmware interface that can resolve the msi_domain 786 * should be called from here. 787 */ 788 d = pci_host_bridge_of_msi_domain(bus); 789 if (!d) 790 d = pci_host_bridge_acpi_msi_domain(bus); 791 792 #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN 793 /* 794 * If no IRQ domain was found via the OF tree, try looking it up 795 * directly through the fwnode_handle. 796 */ 797 if (!d) { 798 struct fwnode_handle *fwnode = pci_root_bus_fwnode(bus); 799 800 if (fwnode) 801 d = irq_find_matching_fwnode(fwnode, 802 DOMAIN_BUS_PCI_MSI); 803 } 804 #endif 805 806 return d; 807 } 808 809 static void pci_set_bus_msi_domain(struct pci_bus *bus) 810 { 811 struct irq_domain *d; 812 struct pci_bus *b; 813 814 /* 815 * The bus can be a root bus, a subordinate bus, or a virtual bus 816 * created by an SR-IOV device. Walk up to the first bridge device 817 * found or derive the domain from the host bridge. 818 */ 819 for (b = bus, d = NULL; !d && !pci_is_root_bus(b); b = b->parent) { 820 if (b->self) 821 d = dev_get_msi_domain(&b->self->dev); 822 } 823 824 if (!d) 825 d = pci_host_bridge_msi_domain(b); 826 827 dev_set_msi_domain(&bus->dev, d); 828 } 829 830 static int pci_register_host_bridge(struct pci_host_bridge *bridge) 831 { 832 struct device *parent = bridge->dev.parent; 833 struct resource_entry *window, *n; 834 struct pci_bus *bus, *b; 835 resource_size_t offset; 836 LIST_HEAD(resources); 837 struct resource *res; 838 char addr[64], *fmt; 839 const char *name; 840 int err; 841 842 bus = pci_alloc_bus(NULL); 843 if (!bus) 844 return -ENOMEM; 845 846 bridge->bus = bus; 847 848 /* Temporarily move resources off the list */ 849 list_splice_init(&bridge->windows, &resources); 850 bus->sysdata = bridge->sysdata; 851 bus->msi = bridge->msi; 852 bus->ops = bridge->ops; 853 bus->number = bus->busn_res.start = bridge->busnr; 854 #ifdef CONFIG_PCI_DOMAINS_GENERIC 855 bus->domain_nr = pci_bus_find_domain_nr(bus, parent); 856 #endif 857 858 b = pci_find_bus(pci_domain_nr(bus), bridge->busnr); 859 if (b) { 860 /* Ignore it if we already got here via a different bridge */ 861 dev_dbg(&b->dev, "bus already known\n"); 862 err = -EEXIST; 863 goto free; 864 } 865 866 dev_set_name(&bridge->dev, "pci%04x:%02x", pci_domain_nr(bus), 867 bridge->busnr); 868 869 err = pcibios_root_bridge_prepare(bridge); 870 if (err) 871 goto free; 872 873 err = device_register(&bridge->dev); 874 if (err) 875 put_device(&bridge->dev); 876 877 bus->bridge = get_device(&bridge->dev); 878 device_enable_async_suspend(bus->bridge); 879 pci_set_bus_of_node(bus); 880 pci_set_bus_msi_domain(bus); 881 882 if (!parent) 883 set_dev_node(bus->bridge, pcibus_to_node(bus)); 884 885 bus->dev.class = &pcibus_class; 886 bus->dev.parent = bus->bridge; 887 888 dev_set_name(&bus->dev, "%04x:%02x", pci_domain_nr(bus), bus->number); 889 name = dev_name(&bus->dev); 890 891 err = device_register(&bus->dev); 892 if (err) 893 goto unregister; 894 895 pcibios_add_bus(bus); 896 897 /* Create legacy_io and legacy_mem files for this bus */ 898 pci_create_legacy_files(bus); 899 900 if (parent) 901 dev_info(parent, "PCI host bridge to bus %s\n", name); 902 else 903 pr_info("PCI host bridge to bus %s\n", name); 904 905 /* Add initial resources to the bus */ 906 resource_list_for_each_entry_safe(window, n, &resources) { 907 list_move_tail(&window->node, &bridge->windows); 908 offset = window->offset; 909 res = window->res; 910 911 if (res->flags & IORESOURCE_BUS) 912 pci_bus_insert_busn_res(bus, bus->number, res->end); 913 else 914 pci_bus_add_resource(bus, res, 0); 915 916 if (offset) { 917 if (resource_type(res) == IORESOURCE_IO) 918 fmt = " (bus address [%#06llx-%#06llx])"; 919 else 920 fmt = " (bus address [%#010llx-%#010llx])"; 921 922 snprintf(addr, sizeof(addr), fmt, 923 (unsigned long long)(res->start - offset), 924 (unsigned long long)(res->end - offset)); 925 } else 926 addr[0] = '\0'; 927 928 dev_info(&bus->dev, "root bus resource %pR%s\n", res, addr); 929 } 930 931 down_write(&pci_bus_sem); 932 list_add_tail(&bus->node, &pci_root_buses); 933 up_write(&pci_bus_sem); 934 935 return 0; 936 937 unregister: 938 put_device(&bridge->dev); 939 device_unregister(&bridge->dev); 940 941 free: 942 kfree(bus); 943 return err; 944 } 945 946 static bool pci_bridge_child_ext_cfg_accessible(struct pci_dev *bridge) 947 { 948 int pos; 949 u32 status; 950 951 /* 952 * If extended config space isn't accessible on a bridge's primary 953 * bus, we certainly can't access it on the secondary bus. 954 */ 955 if (bridge->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG) 956 return false; 957 958 /* 959 * PCIe Root Ports and switch ports are PCIe on both sides, so if 960 * extended config space is accessible on the primary, it's also 961 * accessible on the secondary. 962 */ 963 if (pci_is_pcie(bridge) && 964 (pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT || 965 pci_pcie_type(bridge) == PCI_EXP_TYPE_UPSTREAM || 966 pci_pcie_type(bridge) == PCI_EXP_TYPE_DOWNSTREAM)) 967 return true; 968 969 /* 970 * For the other bridge types: 971 * - PCI-to-PCI bridges 972 * - PCIe-to-PCI/PCI-X forward bridges 973 * - PCI/PCI-X-to-PCIe reverse bridges 974 * extended config space on the secondary side is only accessible 975 * if the bridge supports PCI-X Mode 2. 976 */ 977 pos = pci_find_capability(bridge, PCI_CAP_ID_PCIX); 978 if (!pos) 979 return false; 980 981 pci_read_config_dword(bridge, pos + PCI_X_STATUS, &status); 982 return status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ); 983 } 984 985 static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, 986 struct pci_dev *bridge, int busnr) 987 { 988 struct pci_bus *child; 989 int i; 990 int ret; 991 992 /* Allocate a new bus and inherit stuff from the parent */ 993 child = pci_alloc_bus(parent); 994 if (!child) 995 return NULL; 996 997 child->parent = parent; 998 child->ops = parent->ops; 999 child->msi = parent->msi; 1000 child->sysdata = parent->sysdata; 1001 child->bus_flags = parent->bus_flags; 1002 1003 /* 1004 * Initialize some portions of the bus device, but don't register 1005 * it now as the parent is not properly set up yet. 1006 */ 1007 child->dev.class = &pcibus_class; 1008 dev_set_name(&child->dev, "%04x:%02x", pci_domain_nr(child), busnr); 1009 1010 /* Set up the primary, secondary and subordinate bus numbers */ 1011 child->number = child->busn_res.start = busnr; 1012 child->primary = parent->busn_res.start; 1013 child->busn_res.end = 0xff; 1014 1015 if (!bridge) { 1016 child->dev.parent = parent->bridge; 1017 goto add_dev; 1018 } 1019 1020 child->self = bridge; 1021 child->bridge = get_device(&bridge->dev); 1022 child->dev.parent = child->bridge; 1023 pci_set_bus_of_node(child); 1024 pci_set_bus_speed(child); 1025 1026 /* 1027 * Check whether extended config space is accessible on the child 1028 * bus. Note that we currently assume it is always accessible on 1029 * the root bus. 1030 */ 1031 if (!pci_bridge_child_ext_cfg_accessible(bridge)) { 1032 child->bus_flags |= PCI_BUS_FLAGS_NO_EXTCFG; 1033 pci_info(child, "extended config space not accessible\n"); 1034 } 1035 1036 /* Set up default resource pointers and names */ 1037 for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) { 1038 child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; 1039 child->resource[i]->name = child->name; 1040 } 1041 bridge->subordinate = child; 1042 1043 add_dev: 1044 pci_set_bus_msi_domain(child); 1045 ret = device_register(&child->dev); 1046 WARN_ON(ret < 0); 1047 1048 pcibios_add_bus(child); 1049 1050 if (child->ops->add_bus) { 1051 ret = child->ops->add_bus(child); 1052 if (WARN_ON(ret < 0)) 1053 dev_err(&child->dev, "failed to add bus: %d\n", ret); 1054 } 1055 1056 /* Create legacy_io and legacy_mem files for this bus */ 1057 pci_create_legacy_files(child); 1058 1059 return child; 1060 } 1061 1062 struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, 1063 int busnr) 1064 { 1065 struct pci_bus *child; 1066 1067 child = pci_alloc_child_bus(parent, dev, busnr); 1068 if (child) { 1069 down_write(&pci_bus_sem); 1070 list_add_tail(&child->node, &parent->children); 1071 up_write(&pci_bus_sem); 1072 } 1073 return child; 1074 } 1075 EXPORT_SYMBOL(pci_add_new_bus); 1076 1077 static void pci_enable_crs(struct pci_dev *pdev) 1078 { 1079 u16 root_cap = 0; 1080 1081 /* Enable CRS Software Visibility if supported */ 1082 pcie_capability_read_word(pdev, PCI_EXP_RTCAP, &root_cap); 1083 if (root_cap & PCI_EXP_RTCAP_CRSVIS) 1084 pcie_capability_set_word(pdev, PCI_EXP_RTCTL, 1085 PCI_EXP_RTCTL_CRSSVE); 1086 } 1087 1088 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, 1089 unsigned int available_buses); 1090 /** 1091 * pci_ea_fixed_busnrs() - Read fixed Secondary and Subordinate bus 1092 * numbers from EA capability. 1093 * @dev: Bridge 1094 * @sec: updated with secondary bus number from EA 1095 * @sub: updated with subordinate bus number from EA 1096 * 1097 * If @dev is a bridge with EA capability, update @sec and @sub with 1098 * fixed bus numbers from the capability and return true. Otherwise, 1099 * return false. 1100 */ 1101 static bool pci_ea_fixed_busnrs(struct pci_dev *dev, u8 *sec, u8 *sub) 1102 { 1103 int ea, offset; 1104 u32 dw; 1105 1106 if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) 1107 return false; 1108 1109 /* find PCI EA capability in list */ 1110 ea = pci_find_capability(dev, PCI_CAP_ID_EA); 1111 if (!ea) 1112 return false; 1113 1114 offset = ea + PCI_EA_FIRST_ENT; 1115 pci_read_config_dword(dev, offset, &dw); 1116 *sec = dw & PCI_EA_SEC_BUS_MASK; 1117 *sub = (dw & PCI_EA_SUB_BUS_MASK) >> PCI_EA_SUB_BUS_SHIFT; 1118 return true; 1119 } 1120 1121 /* 1122 * pci_scan_bridge_extend() - Scan buses behind a bridge 1123 * @bus: Parent bus the bridge is on 1124 * @dev: Bridge itself 1125 * @max: Starting subordinate number of buses behind this bridge 1126 * @available_buses: Total number of buses available for this bridge and 1127 * the devices below. After the minimal bus space has 1128 * been allocated the remaining buses will be 1129 * distributed equally between hotplug-capable bridges. 1130 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges 1131 * that need to be reconfigured. 1132 * 1133 * If it's a bridge, configure it and scan the bus behind it. 1134 * For CardBus bridges, we don't scan behind as the devices will 1135 * be handled by the bridge driver itself. 1136 * 1137 * We need to process bridges in two passes -- first we scan those 1138 * already configured by the BIOS and after we are done with all of 1139 * them, we proceed to assigning numbers to the remaining buses in 1140 * order to avoid overlaps between old and new bus numbers. 1141 * 1142 * Return: New subordinate number covering all buses behind this bridge. 1143 */ 1144 static int pci_scan_bridge_extend(struct pci_bus *bus, struct pci_dev *dev, 1145 int max, unsigned int available_buses, 1146 int pass) 1147 { 1148 struct pci_bus *child; 1149 int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); 1150 u32 buses, i, j = 0; 1151 u16 bctl; 1152 u8 primary, secondary, subordinate; 1153 int broken = 0; 1154 bool fixed_buses; 1155 u8 fixed_sec, fixed_sub; 1156 int next_busnr; 1157 1158 /* 1159 * Make sure the bridge is powered on to be able to access config 1160 * space of devices below it. 1161 */ 1162 pm_runtime_get_sync(&dev->dev); 1163 1164 pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); 1165 primary = buses & 0xFF; 1166 secondary = (buses >> 8) & 0xFF; 1167 subordinate = (buses >> 16) & 0xFF; 1168 1169 pci_dbg(dev, "scanning [bus %02x-%02x] behind bridge, pass %d\n", 1170 secondary, subordinate, pass); 1171 1172 if (!primary && (primary != bus->number) && secondary && subordinate) { 1173 pci_warn(dev, "Primary bus is hard wired to 0\n"); 1174 primary = bus->number; 1175 } 1176 1177 /* Check if setup is sensible at all */ 1178 if (!pass && 1179 (primary != bus->number || secondary <= bus->number || 1180 secondary > subordinate)) { 1181 pci_info(dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n", 1182 secondary, subordinate); 1183 broken = 1; 1184 } 1185 1186 /* 1187 * Disable Master-Abort Mode during probing to avoid reporting of 1188 * bus errors in some architectures. 1189 */ 1190 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); 1191 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, 1192 bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); 1193 1194 pci_enable_crs(dev); 1195 1196 if ((secondary || subordinate) && !pcibios_assign_all_busses() && 1197 !is_cardbus && !broken) { 1198 unsigned int cmax; 1199 1200 /* 1201 * Bus already configured by firmware, process it in the 1202 * first pass and just note the configuration. 1203 */ 1204 if (pass) 1205 goto out; 1206 1207 /* 1208 * The bus might already exist for two reasons: Either we 1209 * are rescanning the bus or the bus is reachable through 1210 * more than one bridge. The second case can happen with 1211 * the i450NX chipset. 1212 */ 1213 child = pci_find_bus(pci_domain_nr(bus), secondary); 1214 if (!child) { 1215 child = pci_add_new_bus(bus, dev, secondary); 1216 if (!child) 1217 goto out; 1218 child->primary = primary; 1219 pci_bus_insert_busn_res(child, secondary, subordinate); 1220 child->bridge_ctl = bctl; 1221 } 1222 1223 cmax = pci_scan_child_bus(child); 1224 if (cmax > subordinate) 1225 pci_warn(dev, "bridge has subordinate %02x but max busn %02x\n", 1226 subordinate, cmax); 1227 1228 /* Subordinate should equal child->busn_res.end */ 1229 if (subordinate > max) 1230 max = subordinate; 1231 } else { 1232 1233 /* 1234 * We need to assign a number to this bus which we always 1235 * do in the second pass. 1236 */ 1237 if (!pass) { 1238 if (pcibios_assign_all_busses() || broken || is_cardbus) 1239 1240 /* 1241 * Temporarily disable forwarding of the 1242 * configuration cycles on all bridges in 1243 * this bus segment to avoid possible 1244 * conflicts in the second pass between two 1245 * bridges programmed with overlapping bus 1246 * ranges. 1247 */ 1248 pci_write_config_dword(dev, PCI_PRIMARY_BUS, 1249 buses & ~0xffffff); 1250 goto out; 1251 } 1252 1253 /* Clear errors */ 1254 pci_write_config_word(dev, PCI_STATUS, 0xffff); 1255 1256 /* Read bus numbers from EA Capability (if present) */ 1257 fixed_buses = pci_ea_fixed_busnrs(dev, &fixed_sec, &fixed_sub); 1258 if (fixed_buses) 1259 next_busnr = fixed_sec; 1260 else 1261 next_busnr = max + 1; 1262 1263 /* 1264 * Prevent assigning a bus number that already exists. 1265 * This can happen when a bridge is hot-plugged, so in this 1266 * case we only re-scan this bus. 1267 */ 1268 child = pci_find_bus(pci_domain_nr(bus), next_busnr); 1269 if (!child) { 1270 child = pci_add_new_bus(bus, dev, next_busnr); 1271 if (!child) 1272 goto out; 1273 pci_bus_insert_busn_res(child, next_busnr, 1274 bus->busn_res.end); 1275 } 1276 max++; 1277 if (available_buses) 1278 available_buses--; 1279 1280 buses = (buses & 0xff000000) 1281 | ((unsigned int)(child->primary) << 0) 1282 | ((unsigned int)(child->busn_res.start) << 8) 1283 | ((unsigned int)(child->busn_res.end) << 16); 1284 1285 /* 1286 * yenta.c forces a secondary latency timer of 176. 1287 * Copy that behaviour here. 1288 */ 1289 if (is_cardbus) { 1290 buses &= ~0xff000000; 1291 buses |= CARDBUS_LATENCY_TIMER << 24; 1292 } 1293 1294 /* We need to blast all three values with a single write */ 1295 pci_write_config_dword(dev, PCI_PRIMARY_BUS, buses); 1296 1297 if (!is_cardbus) { 1298 child->bridge_ctl = bctl; 1299 max = pci_scan_child_bus_extend(child, available_buses); 1300 } else { 1301 1302 /* 1303 * For CardBus bridges, we leave 4 bus numbers as 1304 * cards with a PCI-to-PCI bridge can be inserted 1305 * later. 1306 */ 1307 for (i = 0; i < CARDBUS_RESERVE_BUSNR; i++) { 1308 struct pci_bus *parent = bus; 1309 if (pci_find_bus(pci_domain_nr(bus), 1310 max+i+1)) 1311 break; 1312 while (parent->parent) { 1313 if ((!pcibios_assign_all_busses()) && 1314 (parent->busn_res.end > max) && 1315 (parent->busn_res.end <= max+i)) { 1316 j = 1; 1317 } 1318 parent = parent->parent; 1319 } 1320 if (j) { 1321 1322 /* 1323 * Often, there are two CardBus 1324 * bridges -- try to leave one 1325 * valid bus number for each one. 1326 */ 1327 i /= 2; 1328 break; 1329 } 1330 } 1331 max += i; 1332 } 1333 1334 /* 1335 * Set subordinate bus number to its real value. 1336 * If fixed subordinate bus number exists from EA 1337 * capability then use it. 1338 */ 1339 if (fixed_buses) 1340 max = fixed_sub; 1341 pci_bus_update_busn_res_end(child, max); 1342 pci_write_config_byte(dev, PCI_SUBORDINATE_BUS, max); 1343 } 1344 1345 sprintf(child->name, 1346 (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"), 1347 pci_domain_nr(bus), child->number); 1348 1349 /* Check that all devices are accessible */ 1350 while (bus->parent) { 1351 if ((child->busn_res.end > bus->busn_res.end) || 1352 (child->number > bus->busn_res.end) || 1353 (child->number < bus->number) || 1354 (child->busn_res.end < bus->number)) { 1355 dev_info(&dev->dev, "devices behind bridge are unusable because %pR cannot be assigned for them\n", 1356 &child->busn_res); 1357 break; 1358 } 1359 bus = bus->parent; 1360 } 1361 1362 out: 1363 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl); 1364 1365 pm_runtime_put(&dev->dev); 1366 1367 return max; 1368 } 1369 1370 /* 1371 * pci_scan_bridge() - Scan buses behind a bridge 1372 * @bus: Parent bus the bridge is on 1373 * @dev: Bridge itself 1374 * @max: Starting subordinate number of buses behind this bridge 1375 * @pass: Either %0 (scan already configured bridges) or %1 (scan bridges 1376 * that need to be reconfigured. 1377 * 1378 * If it's a bridge, configure it and scan the bus behind it. 1379 * For CardBus bridges, we don't scan behind as the devices will 1380 * be handled by the bridge driver itself. 1381 * 1382 * We need to process bridges in two passes -- first we scan those 1383 * already configured by the BIOS and after we are done with all of 1384 * them, we proceed to assigning numbers to the remaining buses in 1385 * order to avoid overlaps between old and new bus numbers. 1386 * 1387 * Return: New subordinate number covering all buses behind this bridge. 1388 */ 1389 int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) 1390 { 1391 return pci_scan_bridge_extend(bus, dev, max, 0, pass); 1392 } 1393 EXPORT_SYMBOL(pci_scan_bridge); 1394 1395 /* 1396 * Read interrupt line and base address registers. 1397 * The architecture-dependent code can tweak these, of course. 1398 */ 1399 static void pci_read_irq(struct pci_dev *dev) 1400 { 1401 unsigned char irq; 1402 1403 /* VFs are not allowed to use INTx, so skip the config reads */ 1404 if (dev->is_virtfn) { 1405 dev->pin = 0; 1406 dev->irq = 0; 1407 return; 1408 } 1409 1410 pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &irq); 1411 dev->pin = irq; 1412 if (irq) 1413 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq); 1414 dev->irq = irq; 1415 } 1416 1417 void set_pcie_port_type(struct pci_dev *pdev) 1418 { 1419 int pos; 1420 u16 reg16; 1421 int type; 1422 struct pci_dev *parent; 1423 1424 pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); 1425 if (!pos) 1426 return; 1427 1428 pdev->pcie_cap = pos; 1429 pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, ®16); 1430 pdev->pcie_flags_reg = reg16; 1431 pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); 1432 pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; 1433 1434 /* 1435 * A Root Port or a PCI-to-PCIe bridge is always the upstream end 1436 * of a Link. No PCIe component has two Links. Two Links are 1437 * connected by a Switch that has a Port on each Link and internal 1438 * logic to connect the two Ports. 1439 */ 1440 type = pci_pcie_type(pdev); 1441 if (type == PCI_EXP_TYPE_ROOT_PORT || 1442 type == PCI_EXP_TYPE_PCIE_BRIDGE) 1443 pdev->has_secondary_link = 1; 1444 else if (type == PCI_EXP_TYPE_UPSTREAM || 1445 type == PCI_EXP_TYPE_DOWNSTREAM) { 1446 parent = pci_upstream_bridge(pdev); 1447 1448 /* 1449 * Usually there's an upstream device (Root Port or Switch 1450 * Downstream Port), but we can't assume one exists. 1451 */ 1452 if (parent && !parent->has_secondary_link) 1453 pdev->has_secondary_link = 1; 1454 } 1455 } 1456 1457 void set_pcie_hotplug_bridge(struct pci_dev *pdev) 1458 { 1459 u32 reg32; 1460 1461 pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, ®32); 1462 if (reg32 & PCI_EXP_SLTCAP_HPC) 1463 pdev->is_hotplug_bridge = 1; 1464 } 1465 1466 static void set_pcie_thunderbolt(struct pci_dev *dev) 1467 { 1468 int vsec = 0; 1469 u32 header; 1470 1471 while ((vsec = pci_find_next_ext_capability(dev, vsec, 1472 PCI_EXT_CAP_ID_VNDR))) { 1473 pci_read_config_dword(dev, vsec + PCI_VNDR_HEADER, &header); 1474 1475 /* Is the device part of a Thunderbolt controller? */ 1476 if (dev->vendor == PCI_VENDOR_ID_INTEL && 1477 PCI_VNDR_HEADER_ID(header) == PCI_VSEC_ID_INTEL_TBT) { 1478 dev->is_thunderbolt = 1; 1479 return; 1480 } 1481 } 1482 } 1483 1484 static void set_pcie_untrusted(struct pci_dev *dev) 1485 { 1486 struct pci_dev *parent; 1487 1488 /* 1489 * If the upstream bridge is untrusted we treat this device 1490 * untrusted as well. 1491 */ 1492 parent = pci_upstream_bridge(dev); 1493 if (parent && parent->untrusted) 1494 dev->untrusted = true; 1495 } 1496 1497 /** 1498 * pci_ext_cfg_is_aliased - Is ext config space just an alias of std config? 1499 * @dev: PCI device 1500 * 1501 * PCI Express to PCI/PCI-X Bridge Specification, rev 1.0, 4.1.4 says that 1502 * when forwarding a type1 configuration request the bridge must check that 1503 * the extended register address field is zero. The bridge is not permitted 1504 * to forward the transactions and must handle it as an Unsupported Request. 1505 * Some bridges do not follow this rule and simply drop the extended register 1506 * bits, resulting in the standard config space being aliased, every 256 1507 * bytes across the entire configuration space. Test for this condition by 1508 * comparing the first dword of each potential alias to the vendor/device ID. 1509 * Known offenders: 1510 * ASM1083/1085 PCIe-to-PCI Reversible Bridge (1b21:1080, rev 01 & 03) 1511 * AMD/ATI SBx00 PCI to PCI Bridge (1002:4384, rev 40) 1512 */ 1513 static bool pci_ext_cfg_is_aliased(struct pci_dev *dev) 1514 { 1515 #ifdef CONFIG_PCI_QUIRKS 1516 int pos; 1517 u32 header, tmp; 1518 1519 pci_read_config_dword(dev, PCI_VENDOR_ID, &header); 1520 1521 for (pos = PCI_CFG_SPACE_SIZE; 1522 pos < PCI_CFG_SPACE_EXP_SIZE; pos += PCI_CFG_SPACE_SIZE) { 1523 if (pci_read_config_dword(dev, pos, &tmp) != PCIBIOS_SUCCESSFUL 1524 || header != tmp) 1525 return false; 1526 } 1527 1528 return true; 1529 #else 1530 return false; 1531 #endif 1532 } 1533 1534 /** 1535 * pci_cfg_space_size - Get the configuration space size of the PCI device 1536 * @dev: PCI device 1537 * 1538 * Regular PCI devices have 256 bytes, but PCI-X 2 and PCI Express devices 1539 * have 4096 bytes. Even if the device is capable, that doesn't mean we can 1540 * access it. Maybe we don't have a way to generate extended config space 1541 * accesses, or the device is behind a reverse Express bridge. So we try 1542 * reading the dword at 0x100 which must either be 0 or a valid extended 1543 * capability header. 1544 */ 1545 static int pci_cfg_space_size_ext(struct pci_dev *dev) 1546 { 1547 u32 status; 1548 int pos = PCI_CFG_SPACE_SIZE; 1549 1550 if (pci_read_config_dword(dev, pos, &status) != PCIBIOS_SUCCESSFUL) 1551 return PCI_CFG_SPACE_SIZE; 1552 if (status == 0xffffffff || pci_ext_cfg_is_aliased(dev)) 1553 return PCI_CFG_SPACE_SIZE; 1554 1555 return PCI_CFG_SPACE_EXP_SIZE; 1556 } 1557 1558 #ifdef CONFIG_PCI_IOV 1559 static bool is_vf0(struct pci_dev *dev) 1560 { 1561 if (pci_iov_virtfn_devfn(dev->physfn, 0) == dev->devfn && 1562 pci_iov_virtfn_bus(dev->physfn, 0) == dev->bus->number) 1563 return true; 1564 1565 return false; 1566 } 1567 #endif 1568 1569 int pci_cfg_space_size(struct pci_dev *dev) 1570 { 1571 int pos; 1572 u32 status; 1573 u16 class; 1574 1575 #ifdef CONFIG_PCI_IOV 1576 /* Read cached value for all VFs except for VF0 */ 1577 if (dev->is_virtfn && !is_vf0(dev)) 1578 return dev->physfn->sriov->cfg_size; 1579 #endif 1580 1581 if (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_EXTCFG) 1582 return PCI_CFG_SPACE_SIZE; 1583 1584 class = dev->class >> 8; 1585 if (class == PCI_CLASS_BRIDGE_HOST) 1586 return pci_cfg_space_size_ext(dev); 1587 1588 if (pci_is_pcie(dev)) 1589 return pci_cfg_space_size_ext(dev); 1590 1591 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); 1592 if (!pos) 1593 return PCI_CFG_SPACE_SIZE; 1594 1595 pci_read_config_dword(dev, pos + PCI_X_STATUS, &status); 1596 if (status & (PCI_X_STATUS_266MHZ | PCI_X_STATUS_533MHZ)) 1597 return pci_cfg_space_size_ext(dev); 1598 1599 return PCI_CFG_SPACE_SIZE; 1600 } 1601 1602 static u32 pci_class(struct pci_dev *dev) 1603 { 1604 u32 class; 1605 1606 #ifdef CONFIG_PCI_IOV 1607 if (dev->is_virtfn) 1608 return dev->physfn->sriov->class; 1609 #endif 1610 pci_read_config_dword(dev, PCI_CLASS_REVISION, &class); 1611 return class; 1612 } 1613 1614 static void pci_subsystem_ids(struct pci_dev *dev, u16 *vendor, u16 *device) 1615 { 1616 #ifdef CONFIG_PCI_IOV 1617 if (dev->is_virtfn) { 1618 *vendor = dev->physfn->sriov->subsystem_vendor; 1619 *device = dev->physfn->sriov->subsystem_device; 1620 return; 1621 } 1622 #endif 1623 pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, vendor); 1624 pci_read_config_word(dev, PCI_SUBSYSTEM_ID, device); 1625 } 1626 1627 static u8 pci_hdr_type(struct pci_dev *dev) 1628 { 1629 u8 hdr_type; 1630 1631 #ifdef CONFIG_PCI_IOV 1632 if (dev->is_virtfn) 1633 return dev->physfn->sriov->hdr_type; 1634 #endif 1635 pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); 1636 return hdr_type; 1637 } 1638 1639 #define LEGACY_IO_RESOURCE (IORESOURCE_IO | IORESOURCE_PCI_FIXED) 1640 1641 static void pci_msi_setup_pci_dev(struct pci_dev *dev) 1642 { 1643 /* 1644 * Disable the MSI hardware to avoid screaming interrupts 1645 * during boot. This is the power on reset default so 1646 * usually this should be a noop. 1647 */ 1648 dev->msi_cap = pci_find_capability(dev, PCI_CAP_ID_MSI); 1649 if (dev->msi_cap) 1650 pci_msi_set_enable(dev, 0); 1651 1652 dev->msix_cap = pci_find_capability(dev, PCI_CAP_ID_MSIX); 1653 if (dev->msix_cap) 1654 pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); 1655 } 1656 1657 /** 1658 * pci_intx_mask_broken - Test PCI_COMMAND_INTX_DISABLE writability 1659 * @dev: PCI device 1660 * 1661 * Test whether PCI_COMMAND_INTX_DISABLE is writable for @dev. Check this 1662 * at enumeration-time to avoid modifying PCI_COMMAND at run-time. 1663 */ 1664 static int pci_intx_mask_broken(struct pci_dev *dev) 1665 { 1666 u16 orig, toggle, new; 1667 1668 pci_read_config_word(dev, PCI_COMMAND, &orig); 1669 toggle = orig ^ PCI_COMMAND_INTX_DISABLE; 1670 pci_write_config_word(dev, PCI_COMMAND, toggle); 1671 pci_read_config_word(dev, PCI_COMMAND, &new); 1672 1673 pci_write_config_word(dev, PCI_COMMAND, orig); 1674 1675 /* 1676 * PCI_COMMAND_INTX_DISABLE was reserved and read-only prior to PCI 1677 * r2.3, so strictly speaking, a device is not *broken* if it's not 1678 * writable. But we'll live with the misnomer for now. 1679 */ 1680 if (new != toggle) 1681 return 1; 1682 return 0; 1683 } 1684 1685 static void early_dump_pci_device(struct pci_dev *pdev) 1686 { 1687 u32 value[256 / 4]; 1688 int i; 1689 1690 pci_info(pdev, "config space:\n"); 1691 1692 for (i = 0; i < 256; i += 4) 1693 pci_read_config_dword(pdev, i, &value[i / 4]); 1694 1695 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, 1696 value, 256, false); 1697 } 1698 1699 /** 1700 * pci_setup_device - Fill in class and map information of a device 1701 * @dev: the device structure to fill 1702 * 1703 * Initialize the device structure with information about the device's 1704 * vendor,class,memory and IO-space addresses, IRQ lines etc. 1705 * Called at initialisation of the PCI subsystem and by CardBus services. 1706 * Returns 0 on success and negative if unknown type of device (not normal, 1707 * bridge or CardBus). 1708 */ 1709 int pci_setup_device(struct pci_dev *dev) 1710 { 1711 u32 class; 1712 u16 cmd; 1713 u8 hdr_type; 1714 int pos = 0; 1715 struct pci_bus_region region; 1716 struct resource *res; 1717 1718 hdr_type = pci_hdr_type(dev); 1719 1720 dev->sysdata = dev->bus->sysdata; 1721 dev->dev.parent = dev->bus->bridge; 1722 dev->dev.bus = &pci_bus_type; 1723 dev->hdr_type = hdr_type & 0x7f; 1724 dev->multifunction = !!(hdr_type & 0x80); 1725 dev->error_state = pci_channel_io_normal; 1726 set_pcie_port_type(dev); 1727 1728 pci_dev_assign_slot(dev); 1729 1730 /* 1731 * Assume 32-bit PCI; let 64-bit PCI cards (which are far rarer) 1732 * set this higher, assuming the system even supports it. 1733 */ 1734 dev->dma_mask = 0xffffffff; 1735 1736 dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(dev->bus), 1737 dev->bus->number, PCI_SLOT(dev->devfn), 1738 PCI_FUNC(dev->devfn)); 1739 1740 class = pci_class(dev); 1741 1742 dev->revision = class & 0xff; 1743 dev->class = class >> 8; /* upper 3 bytes */ 1744 1745 pci_info(dev, "[%04x:%04x] type %02x class %#08x\n", 1746 dev->vendor, dev->device, dev->hdr_type, dev->class); 1747 1748 if (pci_early_dump) 1749 early_dump_pci_device(dev); 1750 1751 /* Need to have dev->class ready */ 1752 dev->cfg_size = pci_cfg_space_size(dev); 1753 1754 /* Need to have dev->cfg_size ready */ 1755 set_pcie_thunderbolt(dev); 1756 1757 set_pcie_untrusted(dev); 1758 1759 /* "Unknown power state" */ 1760 dev->current_state = PCI_UNKNOWN; 1761 1762 /* Early fixups, before probing the BARs */ 1763 pci_fixup_device(pci_fixup_early, dev); 1764 1765 /* Device class may be changed after fixup */ 1766 class = dev->class >> 8; 1767 1768 if (dev->non_compliant_bars) { 1769 pci_read_config_word(dev, PCI_COMMAND, &cmd); 1770 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { 1771 pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n"); 1772 cmd &= ~PCI_COMMAND_IO; 1773 cmd &= ~PCI_COMMAND_MEMORY; 1774 pci_write_config_word(dev, PCI_COMMAND, cmd); 1775 } 1776 } 1777 1778 dev->broken_intx_masking = pci_intx_mask_broken(dev); 1779 1780 switch (dev->hdr_type) { /* header type */ 1781 case PCI_HEADER_TYPE_NORMAL: /* standard header */ 1782 if (class == PCI_CLASS_BRIDGE_PCI) 1783 goto bad; 1784 pci_read_irq(dev); 1785 pci_read_bases(dev, 6, PCI_ROM_ADDRESS); 1786 1787 pci_subsystem_ids(dev, &dev->subsystem_vendor, &dev->subsystem_device); 1788 1789 /* 1790 * Do the ugly legacy mode stuff here rather than broken chip 1791 * quirk code. Legacy mode ATA controllers have fixed 1792 * addresses. These are not always echoed in BAR0-3, and 1793 * BAR0-3 in a few cases contain junk! 1794 */ 1795 if (class == PCI_CLASS_STORAGE_IDE) { 1796 u8 progif; 1797 pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); 1798 if ((progif & 1) == 0) { 1799 region.start = 0x1F0; 1800 region.end = 0x1F7; 1801 res = &dev->resource[0]; 1802 res->flags = LEGACY_IO_RESOURCE; 1803 pcibios_bus_to_resource(dev->bus, res, ®ion); 1804 pci_info(dev, "legacy IDE quirk: reg 0x10: %pR\n", 1805 res); 1806 region.start = 0x3F6; 1807 region.end = 0x3F6; 1808 res = &dev->resource[1]; 1809 res->flags = LEGACY_IO_RESOURCE; 1810 pcibios_bus_to_resource(dev->bus, res, ®ion); 1811 pci_info(dev, "legacy IDE quirk: reg 0x14: %pR\n", 1812 res); 1813 } 1814 if ((progif & 4) == 0) { 1815 region.start = 0x170; 1816 region.end = 0x177; 1817 res = &dev->resource[2]; 1818 res->flags = LEGACY_IO_RESOURCE; 1819 pcibios_bus_to_resource(dev->bus, res, ®ion); 1820 pci_info(dev, "legacy IDE quirk: reg 0x18: %pR\n", 1821 res); 1822 region.start = 0x376; 1823 region.end = 0x376; 1824 res = &dev->resource[3]; 1825 res->flags = LEGACY_IO_RESOURCE; 1826 pcibios_bus_to_resource(dev->bus, res, ®ion); 1827 pci_info(dev, "legacy IDE quirk: reg 0x1c: %pR\n", 1828 res); 1829 } 1830 } 1831 break; 1832 1833 case PCI_HEADER_TYPE_BRIDGE: /* bridge header */ 1834 /* 1835 * The PCI-to-PCI bridge spec requires that subtractive 1836 * decoding (i.e. transparent) bridge must have programming 1837 * interface code of 0x01. 1838 */ 1839 pci_read_irq(dev); 1840 dev->transparent = ((dev->class & 0xff) == 1); 1841 pci_read_bases(dev, 2, PCI_ROM_ADDRESS1); 1842 pci_read_bridge_windows(dev); 1843 set_pcie_hotplug_bridge(dev); 1844 pos = pci_find_capability(dev, PCI_CAP_ID_SSVID); 1845 if (pos) { 1846 pci_read_config_word(dev, pos + PCI_SSVID_VENDOR_ID, &dev->subsystem_vendor); 1847 pci_read_config_word(dev, pos + PCI_SSVID_DEVICE_ID, &dev->subsystem_device); 1848 } 1849 break; 1850 1851 case PCI_HEADER_TYPE_CARDBUS: /* CardBus bridge header */ 1852 if (class != PCI_CLASS_BRIDGE_CARDBUS) 1853 goto bad; 1854 pci_read_irq(dev); 1855 pci_read_bases(dev, 1, 0); 1856 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor); 1857 pci_read_config_word(dev, PCI_CB_SUBSYSTEM_ID, &dev->subsystem_device); 1858 break; 1859 1860 default: /* unknown header */ 1861 pci_err(dev, "unknown header type %02x, ignoring device\n", 1862 dev->hdr_type); 1863 return -EIO; 1864 1865 bad: 1866 pci_err(dev, "ignoring class %#08x (doesn't match header type %02x)\n", 1867 dev->class, dev->hdr_type); 1868 dev->class = PCI_CLASS_NOT_DEFINED << 8; 1869 } 1870 1871 /* We found a fine healthy device, go go go... */ 1872 return 0; 1873 } 1874 1875 static void pci_configure_mps(struct pci_dev *dev) 1876 { 1877 struct pci_dev *bridge = pci_upstream_bridge(dev); 1878 int mps, mpss, p_mps, rc; 1879 1880 if (!pci_is_pcie(dev) || !bridge || !pci_is_pcie(bridge)) 1881 return; 1882 1883 /* MPS and MRRS fields are of type 'RsvdP' for VFs, short-circuit out */ 1884 if (dev->is_virtfn) 1885 return; 1886 1887 mps = pcie_get_mps(dev); 1888 p_mps = pcie_get_mps(bridge); 1889 1890 if (mps == p_mps) 1891 return; 1892 1893 if (pcie_bus_config == PCIE_BUS_TUNE_OFF) { 1894 pci_warn(dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", 1895 mps, pci_name(bridge), p_mps); 1896 return; 1897 } 1898 1899 /* 1900 * Fancier MPS configuration is done later by 1901 * pcie_bus_configure_settings() 1902 */ 1903 if (pcie_bus_config != PCIE_BUS_DEFAULT) 1904 return; 1905 1906 mpss = 128 << dev->pcie_mpss; 1907 if (mpss < p_mps && pci_pcie_type(bridge) == PCI_EXP_TYPE_ROOT_PORT) { 1908 pcie_set_mps(bridge, mpss); 1909 pci_info(dev, "Upstream bridge's Max Payload Size set to %d (was %d, max %d)\n", 1910 mpss, p_mps, 128 << bridge->pcie_mpss); 1911 p_mps = pcie_get_mps(bridge); 1912 } 1913 1914 rc = pcie_set_mps(dev, p_mps); 1915 if (rc) { 1916 pci_warn(dev, "can't set Max Payload Size to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", 1917 p_mps); 1918 return; 1919 } 1920 1921 pci_info(dev, "Max Payload Size set to %d (was %d, max %d)\n", 1922 p_mps, mps, mpss); 1923 } 1924 1925 static struct hpp_type0 pci_default_type0 = { 1926 .revision = 1, 1927 .cache_line_size = 8, 1928 .latency_timer = 0x40, 1929 .enable_serr = 0, 1930 .enable_perr = 0, 1931 }; 1932 1933 static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp) 1934 { 1935 u16 pci_cmd, pci_bctl; 1936 1937 if (!hpp) 1938 hpp = &pci_default_type0; 1939 1940 if (hpp->revision > 1) { 1941 pci_warn(dev, "PCI settings rev %d not supported; using defaults\n", 1942 hpp->revision); 1943 hpp = &pci_default_type0; 1944 } 1945 1946 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size); 1947 pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer); 1948 pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); 1949 if (hpp->enable_serr) 1950 pci_cmd |= PCI_COMMAND_SERR; 1951 if (hpp->enable_perr) 1952 pci_cmd |= PCI_COMMAND_PARITY; 1953 pci_write_config_word(dev, PCI_COMMAND, pci_cmd); 1954 1955 /* Program bridge control value */ 1956 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { 1957 pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 1958 hpp->latency_timer); 1959 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); 1960 if (hpp->enable_perr) 1961 pci_bctl |= PCI_BRIDGE_CTL_PARITY; 1962 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); 1963 } 1964 } 1965 1966 static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp) 1967 { 1968 int pos; 1969 1970 if (!hpp) 1971 return; 1972 1973 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); 1974 if (!pos) 1975 return; 1976 1977 pci_warn(dev, "PCI-X settings not supported\n"); 1978 } 1979 1980 static bool pcie_root_rcb_set(struct pci_dev *dev) 1981 { 1982 struct pci_dev *rp = pcie_find_root_port(dev); 1983 u16 lnkctl; 1984 1985 if (!rp) 1986 return false; 1987 1988 pcie_capability_read_word(rp, PCI_EXP_LNKCTL, &lnkctl); 1989 if (lnkctl & PCI_EXP_LNKCTL_RCB) 1990 return true; 1991 1992 return false; 1993 } 1994 1995 static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp) 1996 { 1997 int pos; 1998 u32 reg32; 1999 2000 if (!hpp) 2001 return; 2002 2003 if (!pci_is_pcie(dev)) 2004 return; 2005 2006 if (hpp->revision > 1) { 2007 pci_warn(dev, "PCIe settings rev %d not supported\n", 2008 hpp->revision); 2009 return; 2010 } 2011 2012 /* 2013 * Don't allow _HPX to change MPS or MRRS settings. We manage 2014 * those to make sure they're consistent with the rest of the 2015 * platform. 2016 */ 2017 hpp->pci_exp_devctl_and |= PCI_EXP_DEVCTL_PAYLOAD | 2018 PCI_EXP_DEVCTL_READRQ; 2019 hpp->pci_exp_devctl_or &= ~(PCI_EXP_DEVCTL_PAYLOAD | 2020 PCI_EXP_DEVCTL_READRQ); 2021 2022 /* Initialize Device Control Register */ 2023 pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, 2024 ~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or); 2025 2026 /* Initialize Link Control Register */ 2027 if (pcie_cap_has_lnkctl(dev)) { 2028 2029 /* 2030 * If the Root Port supports Read Completion Boundary of 2031 * 128, set RCB to 128. Otherwise, clear it. 2032 */ 2033 hpp->pci_exp_lnkctl_and |= PCI_EXP_LNKCTL_RCB; 2034 hpp->pci_exp_lnkctl_or &= ~PCI_EXP_LNKCTL_RCB; 2035 if (pcie_root_rcb_set(dev)) 2036 hpp->pci_exp_lnkctl_or |= PCI_EXP_LNKCTL_RCB; 2037 2038 pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, 2039 ~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or); 2040 } 2041 2042 /* Find Advanced Error Reporting Enhanced Capability */ 2043 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); 2044 if (!pos) 2045 return; 2046 2047 /* Initialize Uncorrectable Error Mask Register */ 2048 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32); 2049 reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or; 2050 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32); 2051 2052 /* Initialize Uncorrectable Error Severity Register */ 2053 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32); 2054 reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or; 2055 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32); 2056 2057 /* Initialize Correctable Error Mask Register */ 2058 pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32); 2059 reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or; 2060 pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32); 2061 2062 /* Initialize Advanced Error Capabilities and Control Register */ 2063 pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); 2064 reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or; 2065 2066 /* Don't enable ECRC generation or checking if unsupported */ 2067 if (!(reg32 & PCI_ERR_CAP_ECRC_GENC)) 2068 reg32 &= ~PCI_ERR_CAP_ECRC_GENE; 2069 if (!(reg32 & PCI_ERR_CAP_ECRC_CHKC)) 2070 reg32 &= ~PCI_ERR_CAP_ECRC_CHKE; 2071 pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); 2072 2073 /* 2074 * FIXME: The following two registers are not supported yet. 2075 * 2076 * o Secondary Uncorrectable Error Severity Register 2077 * o Secondary Uncorrectable Error Mask Register 2078 */ 2079 } 2080 2081 static u16 hpx3_device_type(struct pci_dev *dev) 2082 { 2083 u16 pcie_type = pci_pcie_type(dev); 2084 const int pcie_to_hpx3_type[] = { 2085 [PCI_EXP_TYPE_ENDPOINT] = HPX_TYPE_ENDPOINT, 2086 [PCI_EXP_TYPE_LEG_END] = HPX_TYPE_LEG_END, 2087 [PCI_EXP_TYPE_RC_END] = HPX_TYPE_RC_END, 2088 [PCI_EXP_TYPE_RC_EC] = HPX_TYPE_RC_EC, 2089 [PCI_EXP_TYPE_ROOT_PORT] = HPX_TYPE_ROOT_PORT, 2090 [PCI_EXP_TYPE_UPSTREAM] = HPX_TYPE_UPSTREAM, 2091 [PCI_EXP_TYPE_DOWNSTREAM] = HPX_TYPE_DOWNSTREAM, 2092 [PCI_EXP_TYPE_PCI_BRIDGE] = HPX_TYPE_PCI_BRIDGE, 2093 [PCI_EXP_TYPE_PCIE_BRIDGE] = HPX_TYPE_PCIE_BRIDGE, 2094 }; 2095 2096 if (pcie_type >= ARRAY_SIZE(pcie_to_hpx3_type)) 2097 return 0; 2098 2099 return pcie_to_hpx3_type[pcie_type]; 2100 } 2101 2102 static u8 hpx3_function_type(struct pci_dev *dev) 2103 { 2104 if (dev->is_virtfn) 2105 return HPX_FN_SRIOV_VIRT; 2106 else if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV) > 0) 2107 return HPX_FN_SRIOV_PHYS; 2108 else 2109 return HPX_FN_NORMAL; 2110 } 2111 2112 static bool hpx3_cap_ver_matches(u8 pcie_cap_id, u8 hpx3_cap_id) 2113 { 2114 u8 cap_ver = hpx3_cap_id & 0xf; 2115 2116 if ((hpx3_cap_id & BIT(4)) && cap_ver >= pcie_cap_id) 2117 return true; 2118 else if (cap_ver == pcie_cap_id) 2119 return true; 2120 2121 return false; 2122 } 2123 2124 static void program_hpx_type3_register(struct pci_dev *dev, 2125 const struct hpx_type3 *reg) 2126 { 2127 u32 match_reg, write_reg, header, orig_value; 2128 u16 pos; 2129 2130 if (!(hpx3_device_type(dev) & reg->device_type)) 2131 return; 2132 2133 if (!(hpx3_function_type(dev) & reg->function_type)) 2134 return; 2135 2136 switch (reg->config_space_location) { 2137 case HPX_CFG_PCICFG: 2138 pos = 0; 2139 break; 2140 case HPX_CFG_PCIE_CAP: 2141 pos = pci_find_capability(dev, reg->pci_exp_cap_id); 2142 if (pos == 0) 2143 return; 2144 2145 break; 2146 case HPX_CFG_PCIE_CAP_EXT: 2147 pos = pci_find_ext_capability(dev, reg->pci_exp_cap_id); 2148 if (pos == 0) 2149 return; 2150 2151 pci_read_config_dword(dev, pos, &header); 2152 if (!hpx3_cap_ver_matches(PCI_EXT_CAP_VER(header), 2153 reg->pci_exp_cap_ver)) 2154 return; 2155 2156 break; 2157 case HPX_CFG_VEND_CAP: /* Fall through */ 2158 case HPX_CFG_DVSEC: /* Fall through */ 2159 default: 2160 pci_warn(dev, "Encountered _HPX type 3 with unsupported config space location"); 2161 return; 2162 } 2163 2164 pci_read_config_dword(dev, pos + reg->match_offset, &match_reg); 2165 2166 if ((match_reg & reg->match_mask_and) != reg->match_value) 2167 return; 2168 2169 pci_read_config_dword(dev, pos + reg->reg_offset, &write_reg); 2170 orig_value = write_reg; 2171 write_reg &= reg->reg_mask_and; 2172 write_reg |= reg->reg_mask_or; 2173 2174 if (orig_value == write_reg) 2175 return; 2176 2177 pci_write_config_dword(dev, pos + reg->reg_offset, write_reg); 2178 2179 pci_dbg(dev, "Applied _HPX3 at [0x%x]: 0x%08x -> 0x%08x", 2180 pos, orig_value, write_reg); 2181 } 2182 2183 static void program_hpx_type3(struct pci_dev *dev, struct hpx_type3 *hpx3) 2184 { 2185 if (!hpx3) 2186 return; 2187 2188 if (!pci_is_pcie(dev)) 2189 return; 2190 2191 program_hpx_type3_register(dev, hpx3); 2192 } 2193 2194 int pci_configure_extended_tags(struct pci_dev *dev, void *ign) 2195 { 2196 struct pci_host_bridge *host; 2197 u32 cap; 2198 u16 ctl; 2199 int ret; 2200 2201 if (!pci_is_pcie(dev)) 2202 return 0; 2203 2204 ret = pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap); 2205 if (ret) 2206 return 0; 2207 2208 if (!(cap & PCI_EXP_DEVCAP_EXT_TAG)) 2209 return 0; 2210 2211 ret = pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &ctl); 2212 if (ret) 2213 return 0; 2214 2215 host = pci_find_host_bridge(dev->bus); 2216 if (!host) 2217 return 0; 2218 2219 /* 2220 * If some device in the hierarchy doesn't handle Extended Tags 2221 * correctly, make sure they're disabled. 2222 */ 2223 if (host->no_ext_tags) { 2224 if (ctl & PCI_EXP_DEVCTL_EXT_TAG) { 2225 pci_info(dev, "disabling Extended Tags\n"); 2226 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, 2227 PCI_EXP_DEVCTL_EXT_TAG); 2228 } 2229 return 0; 2230 } 2231 2232 if (!(ctl & PCI_EXP_DEVCTL_EXT_TAG)) { 2233 pci_info(dev, "enabling Extended Tags\n"); 2234 pcie_capability_set_word(dev, PCI_EXP_DEVCTL, 2235 PCI_EXP_DEVCTL_EXT_TAG); 2236 } 2237 return 0; 2238 } 2239 2240 /** 2241 * pcie_relaxed_ordering_enabled - Probe for PCIe relaxed ordering enable 2242 * @dev: PCI device to query 2243 * 2244 * Returns true if the device has enabled relaxed ordering attribute. 2245 */ 2246 bool pcie_relaxed_ordering_enabled(struct pci_dev *dev) 2247 { 2248 u16 v; 2249 2250 pcie_capability_read_word(dev, PCI_EXP_DEVCTL, &v); 2251 2252 return !!(v & PCI_EXP_DEVCTL_RELAX_EN); 2253 } 2254 EXPORT_SYMBOL(pcie_relaxed_ordering_enabled); 2255 2256 static void pci_configure_relaxed_ordering(struct pci_dev *dev) 2257 { 2258 struct pci_dev *root; 2259 2260 /* PCI_EXP_DEVICE_RELAX_EN is RsvdP in VFs */ 2261 if (dev->is_virtfn) 2262 return; 2263 2264 if (!pcie_relaxed_ordering_enabled(dev)) 2265 return; 2266 2267 /* 2268 * For now, we only deal with Relaxed Ordering issues with Root 2269 * Ports. Peer-to-Peer DMA is another can of worms. 2270 */ 2271 root = pci_find_pcie_root_port(dev); 2272 if (!root) 2273 return; 2274 2275 if (root->dev_flags & PCI_DEV_FLAGS_NO_RELAXED_ORDERING) { 2276 pcie_capability_clear_word(dev, PCI_EXP_DEVCTL, 2277 PCI_EXP_DEVCTL_RELAX_EN); 2278 pci_info(dev, "Relaxed Ordering disabled because the Root Port didn't support it\n"); 2279 } 2280 } 2281 2282 static void pci_configure_ltr(struct pci_dev *dev) 2283 { 2284 #ifdef CONFIG_PCIEASPM 2285 struct pci_host_bridge *host = pci_find_host_bridge(dev->bus); 2286 struct pci_dev *bridge; 2287 u32 cap, ctl; 2288 2289 if (!pci_is_pcie(dev)) 2290 return; 2291 2292 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap); 2293 if (!(cap & PCI_EXP_DEVCAP2_LTR)) 2294 return; 2295 2296 pcie_capability_read_dword(dev, PCI_EXP_DEVCTL2, &ctl); 2297 if (ctl & PCI_EXP_DEVCTL2_LTR_EN) { 2298 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) { 2299 dev->ltr_path = 1; 2300 return; 2301 } 2302 2303 bridge = pci_upstream_bridge(dev); 2304 if (bridge && bridge->ltr_path) 2305 dev->ltr_path = 1; 2306 2307 return; 2308 } 2309 2310 if (!host->native_ltr) 2311 return; 2312 2313 /* 2314 * Software must not enable LTR in an Endpoint unless the Root 2315 * Complex and all intermediate Switches indicate support for LTR. 2316 * PCIe r4.0, sec 6.18. 2317 */ 2318 if (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || 2319 ((bridge = pci_upstream_bridge(dev)) && 2320 bridge->ltr_path)) { 2321 pcie_capability_set_word(dev, PCI_EXP_DEVCTL2, 2322 PCI_EXP_DEVCTL2_LTR_EN); 2323 dev->ltr_path = 1; 2324 } 2325 #endif 2326 } 2327 2328 static void pci_configure_eetlp_prefix(struct pci_dev *dev) 2329 { 2330 #ifdef CONFIG_PCI_PASID 2331 struct pci_dev *bridge; 2332 int pcie_type; 2333 u32 cap; 2334 2335 if (!pci_is_pcie(dev)) 2336 return; 2337 2338 pcie_capability_read_dword(dev, PCI_EXP_DEVCAP2, &cap); 2339 if (!(cap & PCI_EXP_DEVCAP2_EE_PREFIX)) 2340 return; 2341 2342 pcie_type = pci_pcie_type(dev); 2343 if (pcie_type == PCI_EXP_TYPE_ROOT_PORT || 2344 pcie_type == PCI_EXP_TYPE_RC_END) 2345 dev->eetlp_prefix_path = 1; 2346 else { 2347 bridge = pci_upstream_bridge(dev); 2348 if (bridge && bridge->eetlp_prefix_path) 2349 dev->eetlp_prefix_path = 1; 2350 } 2351 #endif 2352 } 2353 2354 static void pci_configure_serr(struct pci_dev *dev) 2355 { 2356 u16 control; 2357 2358 if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) { 2359 2360 /* 2361 * A bridge will not forward ERR_ messages coming from an 2362 * endpoint unless SERR# forwarding is enabled. 2363 */ 2364 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &control); 2365 if (!(control & PCI_BRIDGE_CTL_SERR)) { 2366 control |= PCI_BRIDGE_CTL_SERR; 2367 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, control); 2368 } 2369 } 2370 } 2371 2372 static void pci_configure_device(struct pci_dev *dev) 2373 { 2374 static const struct hotplug_program_ops hp_ops = { 2375 .program_type0 = program_hpp_type0, 2376 .program_type1 = program_hpp_type1, 2377 .program_type2 = program_hpp_type2, 2378 .program_type3 = program_hpx_type3, 2379 }; 2380 2381 pci_configure_mps(dev); 2382 pci_configure_extended_tags(dev, NULL); 2383 pci_configure_relaxed_ordering(dev); 2384 pci_configure_ltr(dev); 2385 pci_configure_eetlp_prefix(dev); 2386 pci_configure_serr(dev); 2387 2388 pci_acpi_program_hp_params(dev, &hp_ops); 2389 } 2390 2391 static void pci_release_capabilities(struct pci_dev *dev) 2392 { 2393 pci_aer_exit(dev); 2394 pci_vpd_release(dev); 2395 pci_iov_release(dev); 2396 pci_free_cap_save_buffers(dev); 2397 } 2398 2399 /** 2400 * pci_release_dev - Free a PCI device structure when all users of it are 2401 * finished 2402 * @dev: device that's been disconnected 2403 * 2404 * Will be called only by the device core when all users of this PCI device are 2405 * done. 2406 */ 2407 static void pci_release_dev(struct device *dev) 2408 { 2409 struct pci_dev *pci_dev; 2410 2411 pci_dev = to_pci_dev(dev); 2412 pci_release_capabilities(pci_dev); 2413 pci_release_of_node(pci_dev); 2414 pcibios_release_device(pci_dev); 2415 pci_bus_put(pci_dev->bus); 2416 kfree(pci_dev->driver_override); 2417 bitmap_free(pci_dev->dma_alias_mask); 2418 kfree(pci_dev); 2419 } 2420 2421 struct pci_dev *pci_alloc_dev(struct pci_bus *bus) 2422 { 2423 struct pci_dev *dev; 2424 2425 dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); 2426 if (!dev) 2427 return NULL; 2428 2429 INIT_LIST_HEAD(&dev->bus_list); 2430 dev->dev.type = &pci_dev_type; 2431 dev->bus = pci_bus_get(bus); 2432 2433 return dev; 2434 } 2435 EXPORT_SYMBOL(pci_alloc_dev); 2436 2437 static bool pci_bus_crs_vendor_id(u32 l) 2438 { 2439 return (l & 0xffff) == 0x0001; 2440 } 2441 2442 static bool pci_bus_wait_crs(struct pci_bus *bus, int devfn, u32 *l, 2443 int timeout) 2444 { 2445 int delay = 1; 2446 2447 if (!pci_bus_crs_vendor_id(*l)) 2448 return true; /* not a CRS completion */ 2449 2450 if (!timeout) 2451 return false; /* CRS, but caller doesn't want to wait */ 2452 2453 /* 2454 * We got the reserved Vendor ID that indicates a completion with 2455 * Configuration Request Retry Status (CRS). Retry until we get a 2456 * valid Vendor ID or we time out. 2457 */ 2458 while (pci_bus_crs_vendor_id(*l)) { 2459 if (delay > timeout) { 2460 pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n", 2461 pci_domain_nr(bus), bus->number, 2462 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2463 2464 return false; 2465 } 2466 if (delay >= 1000) 2467 pr_info("pci %04x:%02x:%02x.%d: not ready after %dms; waiting\n", 2468 pci_domain_nr(bus), bus->number, 2469 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2470 2471 msleep(delay); 2472 delay *= 2; 2473 2474 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) 2475 return false; 2476 } 2477 2478 if (delay >= 1000) 2479 pr_info("pci %04x:%02x:%02x.%d: ready after %dms\n", 2480 pci_domain_nr(bus), bus->number, 2481 PCI_SLOT(devfn), PCI_FUNC(devfn), delay - 1); 2482 2483 return true; 2484 } 2485 2486 bool pci_bus_generic_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, 2487 int timeout) 2488 { 2489 if (pci_bus_read_config_dword(bus, devfn, PCI_VENDOR_ID, l)) 2490 return false; 2491 2492 /* Some broken boards return 0 or ~0 if a slot is empty: */ 2493 if (*l == 0xffffffff || *l == 0x00000000 || 2494 *l == 0x0000ffff || *l == 0xffff0000) 2495 return false; 2496 2497 if (pci_bus_crs_vendor_id(*l)) 2498 return pci_bus_wait_crs(bus, devfn, l, timeout); 2499 2500 return true; 2501 } 2502 2503 bool pci_bus_read_dev_vendor_id(struct pci_bus *bus, int devfn, u32 *l, 2504 int timeout) 2505 { 2506 #ifdef CONFIG_PCI_QUIRKS 2507 struct pci_dev *bridge = bus->self; 2508 2509 /* 2510 * Certain IDT switches have an issue where they improperly trigger 2511 * ACS Source Validation errors on completions for config reads. 2512 */ 2513 if (bridge && bridge->vendor == PCI_VENDOR_ID_IDT && 2514 bridge->device == 0x80b5) 2515 return pci_idt_bus_quirk(bus, devfn, l, timeout); 2516 #endif 2517 2518 return pci_bus_generic_read_dev_vendor_id(bus, devfn, l, timeout); 2519 } 2520 EXPORT_SYMBOL(pci_bus_read_dev_vendor_id); 2521 2522 /* 2523 * Read the config data for a PCI device, sanity-check it, 2524 * and fill in the dev structure. 2525 */ 2526 static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) 2527 { 2528 struct pci_dev *dev; 2529 u32 l; 2530 2531 if (!pci_bus_read_dev_vendor_id(bus, devfn, &l, 60*1000)) 2532 return NULL; 2533 2534 dev = pci_alloc_dev(bus); 2535 if (!dev) 2536 return NULL; 2537 2538 dev->devfn = devfn; 2539 dev->vendor = l & 0xffff; 2540 dev->device = (l >> 16) & 0xffff; 2541 2542 pci_set_of_node(dev); 2543 2544 if (pci_setup_device(dev)) { 2545 pci_bus_put(dev->bus); 2546 kfree(dev); 2547 return NULL; 2548 } 2549 2550 return dev; 2551 } 2552 2553 void pcie_report_downtraining(struct pci_dev *dev) 2554 { 2555 if (!pci_is_pcie(dev)) 2556 return; 2557 2558 /* Look from the device up to avoid downstream ports with no devices */ 2559 if ((pci_pcie_type(dev) != PCI_EXP_TYPE_ENDPOINT) && 2560 (pci_pcie_type(dev) != PCI_EXP_TYPE_LEG_END) && 2561 (pci_pcie_type(dev) != PCI_EXP_TYPE_UPSTREAM)) 2562 return; 2563 2564 /* Multi-function PCIe devices share the same link/status */ 2565 if (PCI_FUNC(dev->devfn) != 0 || dev->is_virtfn) 2566 return; 2567 2568 /* Print link status only if the device is constrained by the fabric */ 2569 __pcie_print_link_status(dev, false); 2570 } 2571 2572 static void pci_init_capabilities(struct pci_dev *dev) 2573 { 2574 /* Enhanced Allocation */ 2575 pci_ea_init(dev); 2576 2577 /* Setup MSI caps & disable MSI/MSI-X interrupts */ 2578 pci_msi_setup_pci_dev(dev); 2579 2580 /* Buffers for saving PCIe and PCI-X capabilities */ 2581 pci_allocate_cap_save_buffers(dev); 2582 2583 /* Power Management */ 2584 pci_pm_init(dev); 2585 2586 /* Vital Product Data */ 2587 pci_vpd_init(dev); 2588 2589 /* Alternative Routing-ID Forwarding */ 2590 pci_configure_ari(dev); 2591 2592 /* Single Root I/O Virtualization */ 2593 pci_iov_init(dev); 2594 2595 /* Address Translation Services */ 2596 pci_ats_init(dev); 2597 2598 /* Enable ACS P2P upstream forwarding */ 2599 pci_enable_acs(dev); 2600 2601 /* Precision Time Measurement */ 2602 pci_ptm_init(dev); 2603 2604 /* Advanced Error Reporting */ 2605 pci_aer_init(dev); 2606 2607 pcie_report_downtraining(dev); 2608 2609 if (pci_probe_reset_function(dev) == 0) 2610 dev->reset_fn = 1; 2611 } 2612 2613 /* 2614 * This is the equivalent of pci_host_bridge_msi_domain() that acts on 2615 * devices. Firmware interfaces that can select the MSI domain on a 2616 * per-device basis should be called from here. 2617 */ 2618 static struct irq_domain *pci_dev_msi_domain(struct pci_dev *dev) 2619 { 2620 struct irq_domain *d; 2621 2622 /* 2623 * If a domain has been set through the pcibios_add_device() 2624 * callback, then this is the one (platform code knows best). 2625 */ 2626 d = dev_get_msi_domain(&dev->dev); 2627 if (d) 2628 return d; 2629 2630 /* 2631 * Let's see if we have a firmware interface able to provide 2632 * the domain. 2633 */ 2634 d = pci_msi_get_device_domain(dev); 2635 if (d) 2636 return d; 2637 2638 return NULL; 2639 } 2640 2641 static void pci_set_msi_domain(struct pci_dev *dev) 2642 { 2643 struct irq_domain *d; 2644 2645 /* 2646 * If the platform or firmware interfaces cannot supply a 2647 * device-specific MSI domain, then inherit the default domain 2648 * from the host bridge itself. 2649 */ 2650 d = pci_dev_msi_domain(dev); 2651 if (!d) 2652 d = dev_get_msi_domain(&dev->bus->dev); 2653 2654 dev_set_msi_domain(&dev->dev, d); 2655 } 2656 2657 void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) 2658 { 2659 int ret; 2660 2661 pci_configure_device(dev); 2662 2663 device_initialize(&dev->dev); 2664 dev->dev.release = pci_release_dev; 2665 2666 set_dev_node(&dev->dev, pcibus_to_node(bus)); 2667 dev->dev.dma_mask = &dev->dma_mask; 2668 dev->dev.dma_parms = &dev->dma_parms; 2669 dev->dev.coherent_dma_mask = 0xffffffffull; 2670 2671 dma_set_max_seg_size(&dev->dev, 65536); 2672 dma_set_seg_boundary(&dev->dev, 0xffffffff); 2673 2674 /* Fix up broken headers */ 2675 pci_fixup_device(pci_fixup_header, dev); 2676 2677 /* Moved out from quirk header fixup code */ 2678 pci_reassigndev_resource_alignment(dev); 2679 2680 /* Clear the state_saved flag */ 2681 dev->state_saved = false; 2682 2683 /* Initialize various capabilities */ 2684 pci_init_capabilities(dev); 2685 2686 /* 2687 * Add the device to our list of discovered devices 2688 * and the bus list for fixup functions, etc. 2689 */ 2690 down_write(&pci_bus_sem); 2691 list_add_tail(&dev->bus_list, &bus->devices); 2692 up_write(&pci_bus_sem); 2693 2694 ret = pcibios_add_device(dev); 2695 WARN_ON(ret < 0); 2696 2697 /* Set up MSI IRQ domain */ 2698 pci_set_msi_domain(dev); 2699 2700 /* Notifier could use PCI capabilities */ 2701 dev->match_driver = false; 2702 ret = device_add(&dev->dev); 2703 WARN_ON(ret < 0); 2704 } 2705 2706 struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn) 2707 { 2708 struct pci_dev *dev; 2709 2710 dev = pci_get_slot(bus, devfn); 2711 if (dev) { 2712 pci_dev_put(dev); 2713 return dev; 2714 } 2715 2716 dev = pci_scan_device(bus, devfn); 2717 if (!dev) 2718 return NULL; 2719 2720 pci_device_add(dev, bus); 2721 2722 return dev; 2723 } 2724 EXPORT_SYMBOL(pci_scan_single_device); 2725 2726 static unsigned next_fn(struct pci_bus *bus, struct pci_dev *dev, unsigned fn) 2727 { 2728 int pos; 2729 u16 cap = 0; 2730 unsigned next_fn; 2731 2732 if (pci_ari_enabled(bus)) { 2733 if (!dev) 2734 return 0; 2735 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ARI); 2736 if (!pos) 2737 return 0; 2738 2739 pci_read_config_word(dev, pos + PCI_ARI_CAP, &cap); 2740 next_fn = PCI_ARI_CAP_NFN(cap); 2741 if (next_fn <= fn) 2742 return 0; /* protect against malformed list */ 2743 2744 return next_fn; 2745 } 2746 2747 /* dev may be NULL for non-contiguous multifunction devices */ 2748 if (!dev || dev->multifunction) 2749 return (fn + 1) % 8; 2750 2751 return 0; 2752 } 2753 2754 static int only_one_child(struct pci_bus *bus) 2755 { 2756 struct pci_dev *bridge = bus->self; 2757 2758 /* 2759 * Systems with unusual topologies set PCI_SCAN_ALL_PCIE_DEVS so 2760 * we scan for all possible devices, not just Device 0. 2761 */ 2762 if (pci_has_flag(PCI_SCAN_ALL_PCIE_DEVS)) 2763 return 0; 2764 2765 /* 2766 * A PCIe Downstream Port normally leads to a Link with only Device 2767 * 0 on it (PCIe spec r3.1, sec 7.3.1). As an optimization, scan 2768 * only for Device 0 in that situation. 2769 * 2770 * Checking has_secondary_link is a hack to identify Downstream 2771 * Ports because sometimes Switches are configured such that the 2772 * PCIe Port Type labels are backwards. 2773 */ 2774 if (bridge && pci_is_pcie(bridge) && bridge->has_secondary_link) 2775 return 1; 2776 2777 return 0; 2778 } 2779 2780 /** 2781 * pci_scan_slot - Scan a PCI slot on a bus for devices 2782 * @bus: PCI bus to scan 2783 * @devfn: slot number to scan (must have zero function) 2784 * 2785 * Scan a PCI slot on the specified PCI bus for devices, adding 2786 * discovered devices to the @bus->devices list. New devices 2787 * will not have is_added set. 2788 * 2789 * Returns the number of new devices found. 2790 */ 2791 int pci_scan_slot(struct pci_bus *bus, int devfn) 2792 { 2793 unsigned fn, nr = 0; 2794 struct pci_dev *dev; 2795 2796 if (only_one_child(bus) && (devfn > 0)) 2797 return 0; /* Already scanned the entire slot */ 2798 2799 dev = pci_scan_single_device(bus, devfn); 2800 if (!dev) 2801 return 0; 2802 if (!pci_dev_is_added(dev)) 2803 nr++; 2804 2805 for (fn = next_fn(bus, dev, 0); fn > 0; fn = next_fn(bus, dev, fn)) { 2806 dev = pci_scan_single_device(bus, devfn + fn); 2807 if (dev) { 2808 if (!pci_dev_is_added(dev)) 2809 nr++; 2810 dev->multifunction = 1; 2811 } 2812 } 2813 2814 /* Only one slot has PCIe device */ 2815 if (bus->self && nr) 2816 pcie_aspm_init_link_state(bus->self); 2817 2818 return nr; 2819 } 2820 EXPORT_SYMBOL(pci_scan_slot); 2821 2822 static int pcie_find_smpss(struct pci_dev *dev, void *data) 2823 { 2824 u8 *smpss = data; 2825 2826 if (!pci_is_pcie(dev)) 2827 return 0; 2828 2829 /* 2830 * We don't have a way to change MPS settings on devices that have 2831 * drivers attached. A hot-added device might support only the minimum 2832 * MPS setting (MPS=128). Therefore, if the fabric contains a bridge 2833 * where devices may be hot-added, we limit the fabric MPS to 128 so 2834 * hot-added devices will work correctly. 2835 * 2836 * However, if we hot-add a device to a slot directly below a Root 2837 * Port, it's impossible for there to be other existing devices below 2838 * the port. We don't limit the MPS in this case because we can 2839 * reconfigure MPS on both the Root Port and the hot-added device, 2840 * and there are no other devices involved. 2841 * 2842 * Note that this PCIE_BUS_SAFE path assumes no peer-to-peer DMA. 2843 */ 2844 if (dev->is_hotplug_bridge && 2845 pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 2846 *smpss = 0; 2847 2848 if (*smpss > dev->pcie_mpss) 2849 *smpss = dev->pcie_mpss; 2850 2851 return 0; 2852 } 2853 2854 static void pcie_write_mps(struct pci_dev *dev, int mps) 2855 { 2856 int rc; 2857 2858 if (pcie_bus_config == PCIE_BUS_PERFORMANCE) { 2859 mps = 128 << dev->pcie_mpss; 2860 2861 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT && 2862 dev->bus->self) 2863 2864 /* 2865 * For "Performance", the assumption is made that 2866 * downstream communication will never be larger than 2867 * the MRRS. So, the MPS only needs to be configured 2868 * for the upstream communication. This being the case, 2869 * walk from the top down and set the MPS of the child 2870 * to that of the parent bus. 2871 * 2872 * Configure the device MPS with the smaller of the 2873 * device MPSS or the bridge MPS (which is assumed to be 2874 * properly configured at this point to the largest 2875 * allowable MPS based on its parent bus). 2876 */ 2877 mps = min(mps, pcie_get_mps(dev->bus->self)); 2878 } 2879 2880 rc = pcie_set_mps(dev, mps); 2881 if (rc) 2882 pci_err(dev, "Failed attempting to set the MPS\n"); 2883 } 2884 2885 static void pcie_write_mrrs(struct pci_dev *dev) 2886 { 2887 int rc, mrrs; 2888 2889 /* 2890 * In the "safe" case, do not configure the MRRS. There appear to be 2891 * issues with setting MRRS to 0 on a number of devices. 2892 */ 2893 if (pcie_bus_config != PCIE_BUS_PERFORMANCE) 2894 return; 2895 2896 /* 2897 * For max performance, the MRRS must be set to the largest supported 2898 * value. However, it cannot be configured larger than the MPS the 2899 * device or the bus can support. This should already be properly 2900 * configured by a prior call to pcie_write_mps(). 2901 */ 2902 mrrs = pcie_get_mps(dev); 2903 2904 /* 2905 * MRRS is a R/W register. Invalid values can be written, but a 2906 * subsequent read will verify if the value is acceptable or not. 2907 * If the MRRS value provided is not acceptable (e.g., too large), 2908 * shrink the value until it is acceptable to the HW. 2909 */ 2910 while (mrrs != pcie_get_readrq(dev) && mrrs >= 128) { 2911 rc = pcie_set_readrq(dev, mrrs); 2912 if (!rc) 2913 break; 2914 2915 pci_warn(dev, "Failed attempting to set the MRRS\n"); 2916 mrrs /= 2; 2917 } 2918 2919 if (mrrs < 128) 2920 pci_err(dev, "MRRS was unable to be configured with a safe value. If problems are experienced, try running with pci=pcie_bus_safe\n"); 2921 } 2922 2923 static int pcie_bus_configure_set(struct pci_dev *dev, void *data) 2924 { 2925 int mps, orig_mps; 2926 2927 if (!pci_is_pcie(dev)) 2928 return 0; 2929 2930 if (pcie_bus_config == PCIE_BUS_TUNE_OFF || 2931 pcie_bus_config == PCIE_BUS_DEFAULT) 2932 return 0; 2933 2934 mps = 128 << *(u8 *)data; 2935 orig_mps = pcie_get_mps(dev); 2936 2937 pcie_write_mps(dev, mps); 2938 pcie_write_mrrs(dev); 2939 2940 pci_info(dev, "Max Payload Size set to %4d/%4d (was %4d), Max Read Rq %4d\n", 2941 pcie_get_mps(dev), 128 << dev->pcie_mpss, 2942 orig_mps, pcie_get_readrq(dev)); 2943 2944 return 0; 2945 } 2946 2947 /* 2948 * pcie_bus_configure_settings() requires that pci_walk_bus work in a top-down, 2949 * parents then children fashion. If this changes, then this code will not 2950 * work as designed. 2951 */ 2952 void pcie_bus_configure_settings(struct pci_bus *bus) 2953 { 2954 u8 smpss = 0; 2955 2956 if (!bus->self) 2957 return; 2958 2959 if (!pci_is_pcie(bus->self)) 2960 return; 2961 2962 /* 2963 * FIXME - Peer to peer DMA is possible, though the endpoint would need 2964 * to be aware of the MPS of the destination. To work around this, 2965 * simply force the MPS of the entire system to the smallest possible. 2966 */ 2967 if (pcie_bus_config == PCIE_BUS_PEER2PEER) 2968 smpss = 0; 2969 2970 if (pcie_bus_config == PCIE_BUS_SAFE) { 2971 smpss = bus->self->pcie_mpss; 2972 2973 pcie_find_smpss(bus->self, &smpss); 2974 pci_walk_bus(bus, pcie_find_smpss, &smpss); 2975 } 2976 2977 pcie_bus_configure_set(bus->self, &smpss); 2978 pci_walk_bus(bus, pcie_bus_configure_set, &smpss); 2979 } 2980 EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); 2981 2982 /* 2983 * Called after each bus is probed, but before its children are examined. This 2984 * is marked as __weak because multiple architectures define it. 2985 */ 2986 void __weak pcibios_fixup_bus(struct pci_bus *bus) 2987 { 2988 /* nothing to do, expected to be removed in the future */ 2989 } 2990 2991 /** 2992 * pci_scan_child_bus_extend() - Scan devices below a bus 2993 * @bus: Bus to scan for devices 2994 * @available_buses: Total number of buses available (%0 does not try to 2995 * extend beyond the minimal) 2996 * 2997 * Scans devices below @bus including subordinate buses. Returns new 2998 * subordinate number including all the found devices. Passing 2999 * @available_buses causes the remaining bus space to be distributed 3000 * equally between hotplug-capable bridges to allow future extension of the 3001 * hierarchy. 3002 */ 3003 static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus, 3004 unsigned int available_buses) 3005 { 3006 unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0; 3007 unsigned int start = bus->busn_res.start; 3008 unsigned int devfn, fn, cmax, max = start; 3009 struct pci_dev *dev; 3010 int nr_devs; 3011 3012 dev_dbg(&bus->dev, "scanning bus\n"); 3013 3014 /* Go find them, Rover! */ 3015 for (devfn = 0; devfn < 256; devfn += 8) { 3016 nr_devs = pci_scan_slot(bus, devfn); 3017 3018 /* 3019 * The Jailhouse hypervisor may pass individual functions of a 3020 * multi-function device to a guest without passing function 0. 3021 * Look for them as well. 3022 */ 3023 if (jailhouse_paravirt() && nr_devs == 0) { 3024 for (fn = 1; fn < 8; fn++) { 3025 dev = pci_scan_single_device(bus, devfn + fn); 3026 if (dev) 3027 dev->multifunction = 1; 3028 } 3029 } 3030 } 3031 3032 /* Reserve buses for SR-IOV capability */ 3033 used_buses = pci_iov_bus_range(bus); 3034 max += used_buses; 3035 3036 /* 3037 * After performing arch-dependent fixup of the bus, look behind 3038 * all PCI-to-PCI bridges on this bus. 3039 */ 3040 if (!bus->is_added) { 3041 dev_dbg(&bus->dev, "fixups for bus\n"); 3042 pcibios_fixup_bus(bus); 3043 bus->is_added = 1; 3044 } 3045 3046 /* 3047 * Calculate how many hotplug bridges and normal bridges there 3048 * are on this bus. We will distribute the additional available 3049 * buses between hotplug bridges. 3050 */ 3051 for_each_pci_bridge(dev, bus) { 3052 if (dev->is_hotplug_bridge) 3053 hotplug_bridges++; 3054 else 3055 normal_bridges++; 3056 } 3057 3058 /* 3059 * Scan bridges that are already configured. We don't touch them 3060 * unless they are misconfigured (which will be done in the second 3061 * scan below). 3062 */ 3063 for_each_pci_bridge(dev, bus) { 3064 cmax = max; 3065 max = pci_scan_bridge_extend(bus, dev, max, 0, 0); 3066 3067 /* 3068 * Reserve one bus for each bridge now to avoid extending 3069 * hotplug bridges too much during the second scan below. 3070 */ 3071 used_buses++; 3072 if (cmax - max > 1) 3073 used_buses += cmax - max - 1; 3074 } 3075 3076 /* Scan bridges that need to be reconfigured */ 3077 for_each_pci_bridge(dev, bus) { 3078 unsigned int buses = 0; 3079 3080 if (!hotplug_bridges && normal_bridges == 1) { 3081 3082 /* 3083 * There is only one bridge on the bus (upstream 3084 * port) so it gets all available buses which it 3085 * can then distribute to the possible hotplug 3086 * bridges below. 3087 */ 3088 buses = available_buses; 3089 } else if (dev->is_hotplug_bridge) { 3090 3091 /* 3092 * Distribute the extra buses between hotplug 3093 * bridges if any. 3094 */ 3095 buses = available_buses / hotplug_bridges; 3096 buses = min(buses, available_buses - used_buses + 1); 3097 } 3098 3099 cmax = max; 3100 max = pci_scan_bridge_extend(bus, dev, cmax, buses, 1); 3101 /* One bus is already accounted so don't add it again */ 3102 if (max - cmax > 1) 3103 used_buses += max - cmax - 1; 3104 } 3105 3106 /* 3107 * Make sure a hotplug bridge has at least the minimum requested 3108 * number of buses but allow it to grow up to the maximum available 3109 * bus number of there is room. 3110 */ 3111 if (bus->self && bus->self->is_hotplug_bridge) { 3112 used_buses = max_t(unsigned int, available_buses, 3113 pci_hotplug_bus_size - 1); 3114 if (max - start < used_buses) { 3115 max = start + used_buses; 3116 3117 /* Do not allocate more buses than we have room left */ 3118 if (max > bus->busn_res.end) 3119 max = bus->busn_res.end; 3120 3121 dev_dbg(&bus->dev, "%pR extended by %#02x\n", 3122 &bus->busn_res, max - start); 3123 } 3124 } 3125 3126 /* 3127 * We've scanned the bus and so we know all about what's on 3128 * the other side of any bridges that may be on this bus plus 3129 * any devices. 3130 * 3131 * Return how far we've got finding sub-buses. 3132 */ 3133 dev_dbg(&bus->dev, "bus scan returning with max=%02x\n", max); 3134 return max; 3135 } 3136 3137 /** 3138 * pci_scan_child_bus() - Scan devices below a bus 3139 * @bus: Bus to scan for devices 3140 * 3141 * Scans devices below @bus including subordinate buses. Returns new 3142 * subordinate number including all the found devices. 3143 */ 3144 unsigned int pci_scan_child_bus(struct pci_bus *bus) 3145 { 3146 return pci_scan_child_bus_extend(bus, 0); 3147 } 3148 EXPORT_SYMBOL_GPL(pci_scan_child_bus); 3149 3150 /** 3151 * pcibios_root_bridge_prepare - Platform-specific host bridge setup 3152 * @bridge: Host bridge to set up 3153 * 3154 * Default empty implementation. Replace with an architecture-specific setup 3155 * routine, if necessary. 3156 */ 3157 int __weak pcibios_root_bridge_prepare(struct pci_host_bridge *bridge) 3158 { 3159 return 0; 3160 } 3161 3162 void __weak pcibios_add_bus(struct pci_bus *bus) 3163 { 3164 } 3165 3166 void __weak pcibios_remove_bus(struct pci_bus *bus) 3167 { 3168 } 3169 3170 struct pci_bus *pci_create_root_bus(struct device *parent, int bus, 3171 struct pci_ops *ops, void *sysdata, struct list_head *resources) 3172 { 3173 int error; 3174 struct pci_host_bridge *bridge; 3175 3176 bridge = pci_alloc_host_bridge(0); 3177 if (!bridge) 3178 return NULL; 3179 3180 bridge->dev.parent = parent; 3181 3182 list_splice_init(resources, &bridge->windows); 3183 bridge->sysdata = sysdata; 3184 bridge->busnr = bus; 3185 bridge->ops = ops; 3186 3187 error = pci_register_host_bridge(bridge); 3188 if (error < 0) 3189 goto err_out; 3190 3191 return bridge->bus; 3192 3193 err_out: 3194 kfree(bridge); 3195 return NULL; 3196 } 3197 EXPORT_SYMBOL_GPL(pci_create_root_bus); 3198 3199 int pci_host_probe(struct pci_host_bridge *bridge) 3200 { 3201 struct pci_bus *bus, *child; 3202 int ret; 3203 3204 ret = pci_scan_root_bus_bridge(bridge); 3205 if (ret < 0) { 3206 dev_err(bridge->dev.parent, "Scanning root bridge failed"); 3207 return ret; 3208 } 3209 3210 bus = bridge->bus; 3211 3212 /* 3213 * We insert PCI resources into the iomem_resource and 3214 * ioport_resource trees in either pci_bus_claim_resources() 3215 * or pci_bus_assign_resources(). 3216 */ 3217 if (pci_has_flag(PCI_PROBE_ONLY)) { 3218 pci_bus_claim_resources(bus); 3219 } else { 3220 pci_bus_size_bridges(bus); 3221 pci_bus_assign_resources(bus); 3222 3223 list_for_each_entry(child, &bus->children, node) 3224 pcie_bus_configure_settings(child); 3225 } 3226 3227 pci_bus_add_devices(bus); 3228 return 0; 3229 } 3230 EXPORT_SYMBOL_GPL(pci_host_probe); 3231 3232 int pci_bus_insert_busn_res(struct pci_bus *b, int bus, int bus_max) 3233 { 3234 struct resource *res = &b->busn_res; 3235 struct resource *parent_res, *conflict; 3236 3237 res->start = bus; 3238 res->end = bus_max; 3239 res->flags = IORESOURCE_BUS; 3240 3241 if (!pci_is_root_bus(b)) 3242 parent_res = &b->parent->busn_res; 3243 else { 3244 parent_res = get_pci_domain_busn_res(pci_domain_nr(b)); 3245 res->flags |= IORESOURCE_PCI_FIXED; 3246 } 3247 3248 conflict = request_resource_conflict(parent_res, res); 3249 3250 if (conflict) 3251 dev_info(&b->dev, 3252 "busn_res: can not insert %pR under %s%pR (conflicts with %s %pR)\n", 3253 res, pci_is_root_bus(b) ? "domain " : "", 3254 parent_res, conflict->name, conflict); 3255 3256 return conflict == NULL; 3257 } 3258 3259 int pci_bus_update_busn_res_end(struct pci_bus *b, int bus_max) 3260 { 3261 struct resource *res = &b->busn_res; 3262 struct resource old_res = *res; 3263 resource_size_t size; 3264 int ret; 3265 3266 if (res->start > bus_max) 3267 return -EINVAL; 3268 3269 size = bus_max - res->start + 1; 3270 ret = adjust_resource(res, res->start, size); 3271 dev_info(&b->dev, "busn_res: %pR end %s updated to %02x\n", 3272 &old_res, ret ? "can not be" : "is", bus_max); 3273 3274 if (!ret && !res->parent) 3275 pci_bus_insert_busn_res(b, res->start, res->end); 3276 3277 return ret; 3278 } 3279 3280 void pci_bus_release_busn_res(struct pci_bus *b) 3281 { 3282 struct resource *res = &b->busn_res; 3283 int ret; 3284 3285 if (!res->flags || !res->parent) 3286 return; 3287 3288 ret = release_resource(res); 3289 dev_info(&b->dev, "busn_res: %pR %s released\n", 3290 res, ret ? "can not be" : "is"); 3291 } 3292 3293 int pci_scan_root_bus_bridge(struct pci_host_bridge *bridge) 3294 { 3295 struct resource_entry *window; 3296 bool found = false; 3297 struct pci_bus *b; 3298 int max, bus, ret; 3299 3300 if (!bridge) 3301 return -EINVAL; 3302 3303 resource_list_for_each_entry(window, &bridge->windows) 3304 if (window->res->flags & IORESOURCE_BUS) { 3305 found = true; 3306 break; 3307 } 3308 3309 ret = pci_register_host_bridge(bridge); 3310 if (ret < 0) 3311 return ret; 3312 3313 b = bridge->bus; 3314 bus = bridge->busnr; 3315 3316 if (!found) { 3317 dev_info(&b->dev, 3318 "No busn resource found for root bus, will use [bus %02x-ff]\n", 3319 bus); 3320 pci_bus_insert_busn_res(b, bus, 255); 3321 } 3322 3323 max = pci_scan_child_bus(b); 3324 3325 if (!found) 3326 pci_bus_update_busn_res_end(b, max); 3327 3328 return 0; 3329 } 3330 EXPORT_SYMBOL(pci_scan_root_bus_bridge); 3331 3332 struct pci_bus *pci_scan_root_bus(struct device *parent, int bus, 3333 struct pci_ops *ops, void *sysdata, struct list_head *resources) 3334 { 3335 struct resource_entry *window; 3336 bool found = false; 3337 struct pci_bus *b; 3338 int max; 3339 3340 resource_list_for_each_entry(window, resources) 3341 if (window->res->flags & IORESOURCE_BUS) { 3342 found = true; 3343 break; 3344 } 3345 3346 b = pci_create_root_bus(parent, bus, ops, sysdata, resources); 3347 if (!b) 3348 return NULL; 3349 3350 if (!found) { 3351 dev_info(&b->dev, 3352 "No busn resource found for root bus, will use [bus %02x-ff]\n", 3353 bus); 3354 pci_bus_insert_busn_res(b, bus, 255); 3355 } 3356 3357 max = pci_scan_child_bus(b); 3358 3359 if (!found) 3360 pci_bus_update_busn_res_end(b, max); 3361 3362 return b; 3363 } 3364 EXPORT_SYMBOL(pci_scan_root_bus); 3365 3366 struct pci_bus *pci_scan_bus(int bus, struct pci_ops *ops, 3367 void *sysdata) 3368 { 3369 LIST_HEAD(resources); 3370 struct pci_bus *b; 3371 3372 pci_add_resource(&resources, &ioport_resource); 3373 pci_add_resource(&resources, &iomem_resource); 3374 pci_add_resource(&resources, &busn_resource); 3375 b = pci_create_root_bus(NULL, bus, ops, sysdata, &resources); 3376 if (b) { 3377 pci_scan_child_bus(b); 3378 } else { 3379 pci_free_resource_list(&resources); 3380 } 3381 return b; 3382 } 3383 EXPORT_SYMBOL(pci_scan_bus); 3384 3385 /** 3386 * pci_rescan_bus_bridge_resize - Scan a PCI bus for devices 3387 * @bridge: PCI bridge for the bus to scan 3388 * 3389 * Scan a PCI bus and child buses for new devices, add them, 3390 * and enable them, resizing bridge mmio/io resource if necessary 3391 * and possible. The caller must ensure the child devices are already 3392 * removed for resizing to occur. 3393 * 3394 * Returns the max number of subordinate bus discovered. 3395 */ 3396 unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge) 3397 { 3398 unsigned int max; 3399 struct pci_bus *bus = bridge->subordinate; 3400 3401 max = pci_scan_child_bus(bus); 3402 3403 pci_assign_unassigned_bridge_resources(bridge); 3404 3405 pci_bus_add_devices(bus); 3406 3407 return max; 3408 } 3409 3410 /** 3411 * pci_rescan_bus - Scan a PCI bus for devices 3412 * @bus: PCI bus to scan 3413 * 3414 * Scan a PCI bus and child buses for new devices, add them, 3415 * and enable them. 3416 * 3417 * Returns the max number of subordinate bus discovered. 3418 */ 3419 unsigned int pci_rescan_bus(struct pci_bus *bus) 3420 { 3421 unsigned int max; 3422 3423 max = pci_scan_child_bus(bus); 3424 pci_assign_unassigned_bus_resources(bus); 3425 pci_bus_add_devices(bus); 3426 3427 return max; 3428 } 3429 EXPORT_SYMBOL_GPL(pci_rescan_bus); 3430 3431 /* 3432 * pci_rescan_bus(), pci_rescan_bus_bridge_resize() and PCI device removal 3433 * routines should always be executed under this mutex. 3434 */ 3435 static DEFINE_MUTEX(pci_rescan_remove_lock); 3436 3437 void pci_lock_rescan_remove(void) 3438 { 3439 mutex_lock(&pci_rescan_remove_lock); 3440 } 3441 EXPORT_SYMBOL_GPL(pci_lock_rescan_remove); 3442 3443 void pci_unlock_rescan_remove(void) 3444 { 3445 mutex_unlock(&pci_rescan_remove_lock); 3446 } 3447 EXPORT_SYMBOL_GPL(pci_unlock_rescan_remove); 3448 3449 static int __init pci_sort_bf_cmp(const struct device *d_a, 3450 const struct device *d_b) 3451 { 3452 const struct pci_dev *a = to_pci_dev(d_a); 3453 const struct pci_dev *b = to_pci_dev(d_b); 3454 3455 if (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1; 3456 else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return 1; 3457 3458 if (a->bus->number < b->bus->number) return -1; 3459 else if (a->bus->number > b->bus->number) return 1; 3460 3461 if (a->devfn < b->devfn) return -1; 3462 else if (a->devfn > b->devfn) return 1; 3463 3464 return 0; 3465 } 3466 3467 void __init pci_sort_breadthfirst(void) 3468 { 3469 bus_sort_breadthfirst(&pci_bus_type, &pci_sort_bf_cmp); 3470 } 3471 3472 int pci_hp_add_bridge(struct pci_dev *dev) 3473 { 3474 struct pci_bus *parent = dev->bus; 3475 int busnr, start = parent->busn_res.start; 3476 unsigned int available_buses = 0; 3477 int end = parent->busn_res.end; 3478 3479 for (busnr = start; busnr <= end; busnr++) { 3480 if (!pci_find_bus(pci_domain_nr(parent), busnr)) 3481 break; 3482 } 3483 if (busnr-- > end) { 3484 pci_err(dev, "No bus number available for hot-added bridge\n"); 3485 return -1; 3486 } 3487 3488 /* Scan bridges that are already configured */ 3489 busnr = pci_scan_bridge(parent, dev, busnr, 0); 3490 3491 /* 3492 * Distribute the available bus numbers between hotplug-capable 3493 * bridges to make extending the chain later possible. 3494 */ 3495 available_buses = end - busnr; 3496 3497 /* Scan bridges that need to be reconfigured */ 3498 pci_scan_bridge_extend(parent, dev, busnr, available_buses, 1); 3499 3500 if (!dev->subordinate) 3501 return -1; 3502 3503 return 0; 3504 } 3505 EXPORT_SYMBOL_GPL(pci_hp_add_bridge); 3506