xref: /openbmc/linux/drivers/pci/pcie/aspm.c (revision 7ebf812b)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Enable PCIe link L0s/L1 state and Clock Power Management
4  *
5  * Copyright (C) 2007 Intel
6  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
7  * Copyright (C) Shaohua Li (shaohua.li@intel.com)
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/math.h>
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/pci.h>
15 #include <linux/pci_regs.h>
16 #include <linux/errno.h>
17 #include <linux/pm.h>
18 #include <linux/init.h>
19 #include <linux/slab.h>
20 #include <linux/jiffies.h>
21 #include <linux/delay.h>
22 #include "../pci.h"
23 
24 #ifdef MODULE_PARAM_PREFIX
25 #undef MODULE_PARAM_PREFIX
26 #endif
27 #define MODULE_PARAM_PREFIX "pcie_aspm."
28 
29 /* Note: those are not register definitions */
30 #define ASPM_STATE_L0S_UP	(1)	/* Upstream direction L0s state */
31 #define ASPM_STATE_L0S_DW	(2)	/* Downstream direction L0s state */
32 #define ASPM_STATE_L1		(4)	/* L1 state */
33 #define ASPM_STATE_L1_1		(8)	/* ASPM L1.1 state */
34 #define ASPM_STATE_L1_2		(0x10)	/* ASPM L1.2 state */
35 #define ASPM_STATE_L1_1_PCIPM	(0x20)	/* PCI PM L1.1 state */
36 #define ASPM_STATE_L1_2_PCIPM	(0x40)	/* PCI PM L1.2 state */
37 #define ASPM_STATE_L1_SS_PCIPM	(ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
38 #define ASPM_STATE_L1_2_MASK	(ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
39 #define ASPM_STATE_L1SS		(ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
40 				 ASPM_STATE_L1_2_MASK)
41 #define ASPM_STATE_L0S		(ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
42 #define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1 |	\
43 				 ASPM_STATE_L1SS)
44 
45 struct pcie_link_state {
46 	struct pci_dev *pdev;		/* Upstream component of the Link */
47 	struct pci_dev *downstream;	/* Downstream component, function 0 */
48 	struct pcie_link_state *root;	/* pointer to the root port link */
49 	struct pcie_link_state *parent;	/* pointer to the parent Link state */
50 	struct list_head sibling;	/* node in link_list */
51 
52 	/* ASPM state */
53 	u32 aspm_support:7;		/* Supported ASPM state */
54 	u32 aspm_enabled:7;		/* Enabled ASPM state */
55 	u32 aspm_capable:7;		/* Capable ASPM state with latency */
56 	u32 aspm_default:7;		/* Default ASPM state by BIOS */
57 	u32 aspm_disable:7;		/* Disabled ASPM state */
58 
59 	/* Clock PM state */
60 	u32 clkpm_capable:1;		/* Clock PM capable? */
61 	u32 clkpm_enabled:1;		/* Current Clock PM state */
62 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
63 	u32 clkpm_disable:1;		/* Clock PM disabled */
64 };
65 
66 static int aspm_disabled, aspm_force;
67 static bool aspm_support_enabled = true;
68 static DEFINE_MUTEX(aspm_lock);
69 static LIST_HEAD(link_list);
70 
71 #define POLICY_DEFAULT 0	/* BIOS default setting */
72 #define POLICY_PERFORMANCE 1	/* high performance */
73 #define POLICY_POWERSAVE 2	/* high power saving */
74 #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
75 
76 #ifdef CONFIG_PCIEASPM_PERFORMANCE
77 static int aspm_policy = POLICY_PERFORMANCE;
78 #elif defined CONFIG_PCIEASPM_POWERSAVE
79 static int aspm_policy = POLICY_POWERSAVE;
80 #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
81 static int aspm_policy = POLICY_POWER_SUPERSAVE;
82 #else
83 static int aspm_policy;
84 #endif
85 
86 static const char *policy_str[] = {
87 	[POLICY_DEFAULT] = "default",
88 	[POLICY_PERFORMANCE] = "performance",
89 	[POLICY_POWERSAVE] = "powersave",
90 	[POLICY_POWER_SUPERSAVE] = "powersupersave"
91 };
92 
93 /*
94  * The L1 PM substate capability is only implemented in function 0 in a
95  * multi function device.
96  */
97 static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
98 {
99 	struct pci_dev *child;
100 
101 	list_for_each_entry(child, &linkbus->devices, bus_list)
102 		if (PCI_FUNC(child->devfn) == 0)
103 			return child;
104 	return NULL;
105 }
106 
107 static int policy_to_aspm_state(struct pcie_link_state *link)
108 {
109 	switch (aspm_policy) {
110 	case POLICY_PERFORMANCE:
111 		/* Disable ASPM and Clock PM */
112 		return 0;
113 	case POLICY_POWERSAVE:
114 		/* Enable ASPM L0s/L1 */
115 		return (ASPM_STATE_L0S | ASPM_STATE_L1);
116 	case POLICY_POWER_SUPERSAVE:
117 		/* Enable Everything */
118 		return ASPM_STATE_ALL;
119 	case POLICY_DEFAULT:
120 		return link->aspm_default;
121 	}
122 	return 0;
123 }
124 
125 static int policy_to_clkpm_state(struct pcie_link_state *link)
126 {
127 	switch (aspm_policy) {
128 	case POLICY_PERFORMANCE:
129 		/* Disable ASPM and Clock PM */
130 		return 0;
131 	case POLICY_POWERSAVE:
132 	case POLICY_POWER_SUPERSAVE:
133 		/* Enable Clock PM */
134 		return 1;
135 	case POLICY_DEFAULT:
136 		return link->clkpm_default;
137 	}
138 	return 0;
139 }
140 
141 static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
142 {
143 	struct pci_dev *child;
144 	struct pci_bus *linkbus = link->pdev->subordinate;
145 	u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0;
146 
147 	list_for_each_entry(child, &linkbus->devices, bus_list)
148 		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
149 						   PCI_EXP_LNKCTL_CLKREQ_EN,
150 						   val);
151 	link->clkpm_enabled = !!enable;
152 }
153 
154 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
155 {
156 	/*
157 	 * Don't enable Clock PM if the link is not Clock PM capable
158 	 * or Clock PM is disabled
159 	 */
160 	if (!link->clkpm_capable || link->clkpm_disable)
161 		enable = 0;
162 	/* Need nothing if the specified equals to current state */
163 	if (link->clkpm_enabled == enable)
164 		return;
165 	pcie_set_clkpm_nocheck(link, enable);
166 }
167 
168 static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
169 {
170 	int capable = 1, enabled = 1;
171 	u32 reg32;
172 	u16 reg16;
173 	struct pci_dev *child;
174 	struct pci_bus *linkbus = link->pdev->subordinate;
175 
176 	/* All functions should have the same cap and state, take the worst */
177 	list_for_each_entry(child, &linkbus->devices, bus_list) {
178 		pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &reg32);
179 		if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
180 			capable = 0;
181 			enabled = 0;
182 			break;
183 		}
184 		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
185 		if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
186 			enabled = 0;
187 	}
188 	link->clkpm_enabled = enabled;
189 	link->clkpm_default = enabled;
190 	link->clkpm_capable = capable;
191 	link->clkpm_disable = blacklist ? 1 : 0;
192 }
193 
194 /*
195  * pcie_aspm_configure_common_clock: check if the 2 ends of a link
196  *   could use common clock. If they are, configure them to use the
197  *   common clock. That will reduce the ASPM state exit latency.
198  */
199 static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
200 {
201 	int same_clock = 1;
202 	u16 reg16, ccc, parent_old_ccc, child_old_ccc[8];
203 	struct pci_dev *child, *parent = link->pdev;
204 	struct pci_bus *linkbus = parent->subordinate;
205 	/*
206 	 * All functions of a slot should have the same Slot Clock
207 	 * Configuration, so just check one function
208 	 */
209 	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
210 	BUG_ON(!pci_is_pcie(child));
211 
212 	/* Check downstream component if bit Slot Clock Configuration is 1 */
213 	pcie_capability_read_word(child, PCI_EXP_LNKSTA, &reg16);
214 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
215 		same_clock = 0;
216 
217 	/* Check upstream component if bit Slot Clock Configuration is 1 */
218 	pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
219 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
220 		same_clock = 0;
221 
222 	/* Port might be already in common clock mode */
223 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
224 	parent_old_ccc = reg16 & PCI_EXP_LNKCTL_CCC;
225 	if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) {
226 		bool consistent = true;
227 
228 		list_for_each_entry(child, &linkbus->devices, bus_list) {
229 			pcie_capability_read_word(child, PCI_EXP_LNKCTL,
230 						  &reg16);
231 			if (!(reg16 & PCI_EXP_LNKCTL_CCC)) {
232 				consistent = false;
233 				break;
234 			}
235 		}
236 		if (consistent)
237 			return;
238 		pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n");
239 	}
240 
241 	ccc = same_clock ? PCI_EXP_LNKCTL_CCC : 0;
242 	/* Configure downstream component, all functions */
243 	list_for_each_entry(child, &linkbus->devices, bus_list) {
244 		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
245 		child_old_ccc[PCI_FUNC(child->devfn)] = reg16 & PCI_EXP_LNKCTL_CCC;
246 		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
247 						   PCI_EXP_LNKCTL_CCC, ccc);
248 	}
249 
250 	/* Configure upstream component */
251 	pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
252 					   PCI_EXP_LNKCTL_CCC, ccc);
253 
254 	if (pcie_retrain_link(link->pdev, true)) {
255 
256 		/* Training failed. Restore common clock configurations */
257 		pci_err(parent, "ASPM: Could not configure common clock\n");
258 		list_for_each_entry(child, &linkbus->devices, bus_list)
259 			pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
260 							   PCI_EXP_LNKCTL_CCC,
261 							   child_old_ccc[PCI_FUNC(child->devfn)]);
262 		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
263 						   PCI_EXP_LNKCTL_CCC, parent_old_ccc);
264 	}
265 }
266 
267 /* Convert L0s latency encoding to ns */
268 static u32 calc_l0s_latency(u32 lnkcap)
269 {
270 	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
271 
272 	if (encoding == 0x7)
273 		return (5 * 1000);	/* > 4us */
274 	return (64 << encoding);
275 }
276 
277 /* Convert L0s acceptable latency encoding to ns */
278 static u32 calc_l0s_acceptable(u32 encoding)
279 {
280 	if (encoding == 0x7)
281 		return -1U;
282 	return (64 << encoding);
283 }
284 
285 /* Convert L1 latency encoding to ns */
286 static u32 calc_l1_latency(u32 lnkcap)
287 {
288 	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
289 
290 	if (encoding == 0x7)
291 		return (65 * 1000);	/* > 64us */
292 	return (1000 << encoding);
293 }
294 
295 /* Convert L1 acceptable latency encoding to ns */
296 static u32 calc_l1_acceptable(u32 encoding)
297 {
298 	if (encoding == 0x7)
299 		return -1U;
300 	return (1000 << encoding);
301 }
302 
303 /* Convert L1SS T_pwr encoding to usec */
304 static u32 calc_l12_pwron(struct pci_dev *pdev, u32 scale, u32 val)
305 {
306 	switch (scale) {
307 	case 0:
308 		return val * 2;
309 	case 1:
310 		return val * 10;
311 	case 2:
312 		return val * 100;
313 	}
314 	pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale);
315 	return 0;
316 }
317 
318 /*
319  * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1
320  * register.  Ports enter L1.2 when the most recent LTR value is greater
321  * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we
322  * don't enter L1.2 too aggressively.
323  *
324  * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3.
325  */
326 static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
327 {
328 	u64 threshold_ns = (u64) threshold_us * 1000;
329 
330 	/*
331 	 * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max
332 	 * value of 0x3ff.
333 	 */
334 	if (threshold_ns <= 0x3ff * 1) {
335 		*scale = 0;		/* Value times 1ns */
336 		*value = threshold_ns;
337 	} else if (threshold_ns <= 0x3ff * 32) {
338 		*scale = 1;		/* Value times 32ns */
339 		*value = roundup(threshold_ns, 32) / 32;
340 	} else if (threshold_ns <= 0x3ff * 1024) {
341 		*scale = 2;		/* Value times 1024ns */
342 		*value = roundup(threshold_ns, 1024) / 1024;
343 	} else if (threshold_ns <= 0x3ff * 32768) {
344 		*scale = 3;		/* Value times 32768ns */
345 		*value = roundup(threshold_ns, 32768) / 32768;
346 	} else if (threshold_ns <= 0x3ff * 1048576) {
347 		*scale = 4;		/* Value times 1048576ns */
348 		*value = roundup(threshold_ns, 1048576) / 1048576;
349 	} else if (threshold_ns <= 0x3ff * (u64) 33554432) {
350 		*scale = 5;		/* Value times 33554432ns */
351 		*value = roundup(threshold_ns, 33554432) / 33554432;
352 	} else {
353 		*scale = 5;
354 		*value = 0x3ff;		/* Max representable value */
355 	}
356 }
357 
358 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
359 {
360 	u32 latency, encoding, lnkcap_up, lnkcap_dw;
361 	u32 l1_switch_latency = 0, latency_up_l0s;
362 	u32 latency_up_l1, latency_dw_l0s, latency_dw_l1;
363 	u32 acceptable_l0s, acceptable_l1;
364 	struct pcie_link_state *link;
365 
366 	/* Device not in D0 doesn't need latency check */
367 	if ((endpoint->current_state != PCI_D0) &&
368 	    (endpoint->current_state != PCI_UNKNOWN))
369 		return;
370 
371 	link = endpoint->bus->self->link_state;
372 
373 	/* Calculate endpoint L0s acceptable latency */
374 	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6;
375 	acceptable_l0s = calc_l0s_acceptable(encoding);
376 
377 	/* Calculate endpoint L1 acceptable latency */
378 	encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9;
379 	acceptable_l1 = calc_l1_acceptable(encoding);
380 
381 	while (link) {
382 		struct pci_dev *dev = pci_function_0(link->pdev->subordinate);
383 
384 		/* Read direction exit latencies */
385 		pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP,
386 					   &lnkcap_up);
387 		pcie_capability_read_dword(dev, PCI_EXP_LNKCAP,
388 					   &lnkcap_dw);
389 		latency_up_l0s = calc_l0s_latency(lnkcap_up);
390 		latency_up_l1 = calc_l1_latency(lnkcap_up);
391 		latency_dw_l0s = calc_l0s_latency(lnkcap_dw);
392 		latency_dw_l1 = calc_l1_latency(lnkcap_dw);
393 
394 		/* Check upstream direction L0s latency */
395 		if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
396 		    (latency_up_l0s > acceptable_l0s))
397 			link->aspm_capable &= ~ASPM_STATE_L0S_UP;
398 
399 		/* Check downstream direction L0s latency */
400 		if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
401 		    (latency_dw_l0s > acceptable_l0s))
402 			link->aspm_capable &= ~ASPM_STATE_L0S_DW;
403 		/*
404 		 * Check L1 latency.
405 		 * Every switch on the path to root complex need 1
406 		 * more microsecond for L1. Spec doesn't mention L0s.
407 		 *
408 		 * The exit latencies for L1 substates are not advertised
409 		 * by a device.  Since the spec also doesn't mention a way
410 		 * to determine max latencies introduced by enabling L1
411 		 * substates on the components, it is not clear how to do
412 		 * a L1 substate exit latency check.  We assume that the
413 		 * L1 exit latencies advertised by a device include L1
414 		 * substate latencies (and hence do not do any check).
415 		 */
416 		latency = max_t(u32, latency_up_l1, latency_dw_l1);
417 		if ((link->aspm_capable & ASPM_STATE_L1) &&
418 		    (latency + l1_switch_latency > acceptable_l1))
419 			link->aspm_capable &= ~ASPM_STATE_L1;
420 		l1_switch_latency += 1000;
421 
422 		link = link->parent;
423 	}
424 }
425 
426 static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
427 				    u32 clear, u32 set)
428 {
429 	u32 val;
430 
431 	pci_read_config_dword(pdev, pos, &val);
432 	val &= ~clear;
433 	val |= set;
434 	pci_write_config_dword(pdev, pos, val);
435 }
436 
437 /* Calculate L1.2 PM substate timing parameters */
438 static void aspm_calc_l12_info(struct pcie_link_state *link,
439 				u32 parent_l1ss_cap, u32 child_l1ss_cap)
440 {
441 	struct pci_dev *child = link->downstream, *parent = link->pdev;
442 	u32 val1, val2, scale1, scale2;
443 	u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
444 	u32 ctl1 = 0, ctl2 = 0;
445 	u32 pctl1, pctl2, cctl1, cctl2;
446 	u32 pl1_2_enables, cl1_2_enables;
447 
448 	/* Choose the greater of the two Port Common_Mode_Restore_Times */
449 	val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
450 	val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
451 	t_common_mode = max(val1, val2);
452 
453 	/* Choose the greater of the two Port T_POWER_ON times */
454 	val1   = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
455 	scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
456 	val2   = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
457 	scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
458 
459 	if (calc_l12_pwron(parent, scale1, val1) >
460 	    calc_l12_pwron(child, scale2, val2)) {
461 		ctl2 |= scale1 | (val1 << 3);
462 		t_power_on = calc_l12_pwron(parent, scale1, val1);
463 	} else {
464 		ctl2 |= scale2 | (val2 << 3);
465 		t_power_on = calc_l12_pwron(child, scale2, val2);
466 	}
467 
468 	/*
469 	 * Set LTR_L1.2_THRESHOLD to the time required to transition the
470 	 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
471 	 * downstream devices report (via LTR) that they can tolerate at
472 	 * least that much latency.
473 	 *
474 	 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
475 	 * Table 5-11.  T(POWER_OFF) is at most 2us and T(L1.2) is at
476 	 * least 4us.
477 	 */
478 	l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
479 	encode_l12_threshold(l1_2_threshold, &scale, &value);
480 	ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
481 
482 	/* Some broken devices only support dword access to L1 SS */
483 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
484 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2);
485 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1);
486 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2);
487 
488 	if (ctl1 == pctl1 && ctl1 == cctl1 &&
489 	    ctl2 == pctl2 && ctl2 == cctl2)
490 		return;
491 
492 	/* Disable L1.2 while updating.  See PCIe r5.0, sec 5.5.4, 7.8.3.3 */
493 	pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK;
494 	cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK;
495 
496 	if (pl1_2_enables || cl1_2_enables) {
497 		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
498 					PCI_L1SS_CTL1_L1_2_MASK, 0);
499 		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
500 					PCI_L1SS_CTL1_L1_2_MASK, 0);
501 	}
502 
503 	/* Program T_POWER_ON times in both ports */
504 	pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2);
505 	pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2);
506 
507 	/* Program Common_Mode_Restore_Time in upstream device */
508 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
509 				PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1);
510 
511 	/* Program LTR_L1.2_THRESHOLD time in both ports */
512 	pci_clear_and_set_dword(parent,	parent->l1ss + PCI_L1SS_CTL1,
513 				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
514 				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
515 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
516 				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
517 				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
518 
519 	if (pl1_2_enables || cl1_2_enables) {
520 		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0,
521 					pl1_2_enables);
522 		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0,
523 					cl1_2_enables);
524 	}
525 }
526 
527 static void aspm_l1ss_init(struct pcie_link_state *link)
528 {
529 	struct pci_dev *child = link->downstream, *parent = link->pdev;
530 	u32 parent_l1ss_cap, child_l1ss_cap;
531 	u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0;
532 
533 	if (!parent->l1ss || !child->l1ss)
534 		return;
535 
536 	/* Setup L1 substate */
537 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP,
538 			      &parent_l1ss_cap);
539 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP,
540 			      &child_l1ss_cap);
541 
542 	if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
543 		parent_l1ss_cap = 0;
544 	if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
545 		child_l1ss_cap = 0;
546 
547 	/*
548 	 * If we don't have LTR for the entire path from the Root Complex
549 	 * to this device, we can't use ASPM L1.2 because it relies on the
550 	 * LTR_L1.2_THRESHOLD.  See PCIe r4.0, secs 5.5.4, 6.18.
551 	 */
552 	if (!child->ltr_path)
553 		child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2;
554 
555 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
556 		link->aspm_support |= ASPM_STATE_L1_1;
557 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
558 		link->aspm_support |= ASPM_STATE_L1_2;
559 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
560 		link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
561 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
562 		link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
563 
564 	if (parent_l1ss_cap)
565 		pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
566 				      &parent_l1ss_ctl1);
567 	if (child_l1ss_cap)
568 		pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1,
569 				      &child_l1ss_ctl1);
570 
571 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
572 		link->aspm_enabled |= ASPM_STATE_L1_1;
573 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
574 		link->aspm_enabled |= ASPM_STATE_L1_2;
575 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
576 		link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
577 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
578 		link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
579 
580 	if (link->aspm_support & ASPM_STATE_L1_2_MASK)
581 		aspm_calc_l12_info(link, parent_l1ss_cap, child_l1ss_cap);
582 }
583 
584 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
585 {
586 	struct pci_dev *child = link->downstream, *parent = link->pdev;
587 	u32 parent_lnkcap, child_lnkcap;
588 	u16 parent_lnkctl, child_lnkctl;
589 	struct pci_bus *linkbus = parent->subordinate;
590 
591 	if (blacklist) {
592 		/* Set enabled/disable so that we will disable ASPM later */
593 		link->aspm_enabled = ASPM_STATE_ALL;
594 		link->aspm_disable = ASPM_STATE_ALL;
595 		return;
596 	}
597 
598 	/*
599 	 * If ASPM not supported, don't mess with the clocks and link,
600 	 * bail out now.
601 	 */
602 	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
603 	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
604 	if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS))
605 		return;
606 
607 	/* Configure common clock before checking latencies */
608 	pcie_aspm_configure_common_clock(link);
609 
610 	/*
611 	 * Re-read upstream/downstream components' register state after
612 	 * clock configuration.  L0s & L1 exit latencies in the otherwise
613 	 * read-only Link Capabilities may change depending on common clock
614 	 * configuration (PCIe r5.0, sec 7.5.3.6).
615 	 */
616 	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
617 	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
618 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl);
619 	pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl);
620 
621 	/*
622 	 * Setup L0s state
623 	 *
624 	 * Note that we must not enable L0s in either direction on a
625 	 * given link unless components on both sides of the link each
626 	 * support L0s.
627 	 */
628 	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)
629 		link->aspm_support |= ASPM_STATE_L0S;
630 
631 	if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
632 		link->aspm_enabled |= ASPM_STATE_L0S_UP;
633 	if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
634 		link->aspm_enabled |= ASPM_STATE_L0S_DW;
635 
636 	/* Setup L1 state */
637 	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
638 		link->aspm_support |= ASPM_STATE_L1;
639 
640 	if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
641 		link->aspm_enabled |= ASPM_STATE_L1;
642 
643 	aspm_l1ss_init(link);
644 
645 	/* Save default state */
646 	link->aspm_default = link->aspm_enabled;
647 
648 	/* Setup initial capable state. Will be updated later */
649 	link->aspm_capable = link->aspm_support;
650 
651 	/* Get and check endpoint acceptable latencies */
652 	list_for_each_entry(child, &linkbus->devices, bus_list) {
653 		if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
654 		    pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
655 			continue;
656 
657 		pcie_aspm_check_latency(child);
658 	}
659 }
660 
661 /* Configure the ASPM L1 substates */
662 static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
663 {
664 	u32 val, enable_req;
665 	struct pci_dev *child = link->downstream, *parent = link->pdev;
666 
667 	enable_req = (link->aspm_enabled ^ state) & state;
668 
669 	/*
670 	 * Here are the rules specified in the PCIe spec for enabling L1SS:
671 	 * - When enabling L1.x, enable bit at parent first, then at child
672 	 * - When disabling L1.x, disable bit at child first, then at parent
673 	 * - When enabling ASPM L1.x, need to disable L1
674 	 *   (at child followed by parent).
675 	 * - The ASPM/PCIPM L1.2 must be disabled while programming timing
676 	 *   parameters
677 	 *
678 	 * To keep it simple, disable all L1SS bits first, and later enable
679 	 * what is needed.
680 	 */
681 
682 	/* Disable all L1 substates */
683 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
684 				PCI_L1SS_CTL1_L1SS_MASK, 0);
685 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
686 				PCI_L1SS_CTL1_L1SS_MASK, 0);
687 	/*
688 	 * If needed, disable L1, and it gets enabled later
689 	 * in pcie_config_aspm_link().
690 	 */
691 	if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
692 		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
693 						   PCI_EXP_LNKCTL_ASPM_L1, 0);
694 		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
695 						   PCI_EXP_LNKCTL_ASPM_L1, 0);
696 	}
697 
698 	val = 0;
699 	if (state & ASPM_STATE_L1_1)
700 		val |= PCI_L1SS_CTL1_ASPM_L1_1;
701 	if (state & ASPM_STATE_L1_2)
702 		val |= PCI_L1SS_CTL1_ASPM_L1_2;
703 	if (state & ASPM_STATE_L1_1_PCIPM)
704 		val |= PCI_L1SS_CTL1_PCIPM_L1_1;
705 	if (state & ASPM_STATE_L1_2_PCIPM)
706 		val |= PCI_L1SS_CTL1_PCIPM_L1_2;
707 
708 	/* Enable what we need to enable */
709 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
710 				PCI_L1SS_CTL1_L1SS_MASK, val);
711 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
712 				PCI_L1SS_CTL1_L1SS_MASK, val);
713 }
714 
715 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
716 {
717 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
718 					   PCI_EXP_LNKCTL_ASPMC, val);
719 }
720 
721 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
722 {
723 	u32 upstream = 0, dwstream = 0;
724 	struct pci_dev *child = link->downstream, *parent = link->pdev;
725 	struct pci_bus *linkbus = parent->subordinate;
726 
727 	/* Enable only the states that were not explicitly disabled */
728 	state &= (link->aspm_capable & ~link->aspm_disable);
729 
730 	/* Can't enable any substates if L1 is not enabled */
731 	if (!(state & ASPM_STATE_L1))
732 		state &= ~ASPM_STATE_L1SS;
733 
734 	/* Spec says both ports must be in D0 before enabling PCI PM substates*/
735 	if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
736 		state &= ~ASPM_STATE_L1_SS_PCIPM;
737 		state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
738 	}
739 
740 	/* Nothing to do if the link is already in the requested state */
741 	if (link->aspm_enabled == state)
742 		return;
743 	/* Convert ASPM state to upstream/downstream ASPM register state */
744 	if (state & ASPM_STATE_L0S_UP)
745 		dwstream |= PCI_EXP_LNKCTL_ASPM_L0S;
746 	if (state & ASPM_STATE_L0S_DW)
747 		upstream |= PCI_EXP_LNKCTL_ASPM_L0S;
748 	if (state & ASPM_STATE_L1) {
749 		upstream |= PCI_EXP_LNKCTL_ASPM_L1;
750 		dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
751 	}
752 
753 	if (link->aspm_capable & ASPM_STATE_L1SS)
754 		pcie_config_aspm_l1ss(link, state);
755 
756 	/*
757 	 * Spec 2.0 suggests all functions should be configured the
758 	 * same setting for ASPM. Enabling ASPM L1 should be done in
759 	 * upstream component first and then downstream, and vice
760 	 * versa for disabling ASPM L1. Spec doesn't mention L0S.
761 	 */
762 	if (state & ASPM_STATE_L1)
763 		pcie_config_aspm_dev(parent, upstream);
764 	list_for_each_entry(child, &linkbus->devices, bus_list)
765 		pcie_config_aspm_dev(child, dwstream);
766 	if (!(state & ASPM_STATE_L1))
767 		pcie_config_aspm_dev(parent, upstream);
768 
769 	link->aspm_enabled = state;
770 }
771 
772 static void pcie_config_aspm_path(struct pcie_link_state *link)
773 {
774 	while (link) {
775 		pcie_config_aspm_link(link, policy_to_aspm_state(link));
776 		link = link->parent;
777 	}
778 }
779 
780 static void free_link_state(struct pcie_link_state *link)
781 {
782 	link->pdev->link_state = NULL;
783 	kfree(link);
784 }
785 
786 static int pcie_aspm_sanity_check(struct pci_dev *pdev)
787 {
788 	struct pci_dev *child;
789 	u32 reg32;
790 
791 	/*
792 	 * Some functions in a slot might not all be PCIe functions,
793 	 * very strange. Disable ASPM for the whole slot
794 	 */
795 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
796 		if (!pci_is_pcie(child))
797 			return -EINVAL;
798 
799 		/*
800 		 * If ASPM is disabled then we're not going to change
801 		 * the BIOS state. It's safe to continue even if it's a
802 		 * pre-1.1 device
803 		 */
804 
805 		if (aspm_disabled)
806 			continue;
807 
808 		/*
809 		 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
810 		 * RBER bit to determine if a function is 1.1 version device
811 		 */
812 		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
813 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
814 			pci_info(child, "disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'\n");
815 			return -EINVAL;
816 		}
817 	}
818 	return 0;
819 }
820 
821 static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
822 {
823 	struct pcie_link_state *link;
824 
825 	link = kzalloc(sizeof(*link), GFP_KERNEL);
826 	if (!link)
827 		return NULL;
828 
829 	INIT_LIST_HEAD(&link->sibling);
830 	link->pdev = pdev;
831 	link->downstream = pci_function_0(pdev->subordinate);
832 
833 	/*
834 	 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
835 	 * hierarchies.  Note that some PCIe host implementations omit
836 	 * the root ports entirely, in which case a downstream port on
837 	 * a switch may become the root of the link state chain for all
838 	 * its subordinate endpoints.
839 	 */
840 	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
841 	    pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE ||
842 	    !pdev->bus->parent->self) {
843 		link->root = link;
844 	} else {
845 		struct pcie_link_state *parent;
846 
847 		parent = pdev->bus->parent->self->link_state;
848 		if (!parent) {
849 			kfree(link);
850 			return NULL;
851 		}
852 
853 		link->parent = parent;
854 		link->root = link->parent->root;
855 	}
856 
857 	list_add(&link->sibling, &link_list);
858 	pdev->link_state = link;
859 	return link;
860 }
861 
862 static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev)
863 {
864 	struct pci_dev *child;
865 
866 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list)
867 		sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group);
868 }
869 
870 /*
871  * pcie_aspm_init_link_state: Initiate PCI express link state.
872  * It is called after the pcie and its children devices are scanned.
873  * @pdev: the root port or switch downstream port
874  */
875 void pcie_aspm_init_link_state(struct pci_dev *pdev)
876 {
877 	struct pcie_link_state *link;
878 	int blacklist = !!pcie_aspm_sanity_check(pdev);
879 
880 	if (!aspm_support_enabled)
881 		return;
882 
883 	if (pdev->link_state)
884 		return;
885 
886 	/*
887 	 * We allocate pcie_link_state for the component on the upstream
888 	 * end of a Link, so there's nothing to do unless this device is
889 	 * downstream port.
890 	 */
891 	if (!pcie_downstream_port(pdev))
892 		return;
893 
894 	/* VIA has a strange chipset, root port is under a bridge */
895 	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
896 	    pdev->bus->self)
897 		return;
898 
899 	down_read(&pci_bus_sem);
900 	if (list_empty(&pdev->subordinate->devices))
901 		goto out;
902 
903 	mutex_lock(&aspm_lock);
904 	link = alloc_pcie_link_state(pdev);
905 	if (!link)
906 		goto unlock;
907 	/*
908 	 * Setup initial ASPM state. Note that we need to configure
909 	 * upstream links also because capable state of them can be
910 	 * update through pcie_aspm_cap_init().
911 	 */
912 	pcie_aspm_cap_init(link, blacklist);
913 
914 	/* Setup initial Clock PM state */
915 	pcie_clkpm_cap_init(link, blacklist);
916 
917 	/*
918 	 * At this stage drivers haven't had an opportunity to change the
919 	 * link policy setting. Enabling ASPM on broken hardware can cripple
920 	 * it even before the driver has had a chance to disable ASPM, so
921 	 * default to a safe level right now. If we're enabling ASPM beyond
922 	 * the BIOS's expectation, we'll do so once pci_enable_device() is
923 	 * called.
924 	 */
925 	if (aspm_policy != POLICY_POWERSAVE &&
926 	    aspm_policy != POLICY_POWER_SUPERSAVE) {
927 		pcie_config_aspm_path(link);
928 		pcie_set_clkpm(link, policy_to_clkpm_state(link));
929 	}
930 
931 	pcie_aspm_update_sysfs_visibility(pdev);
932 
933 unlock:
934 	mutex_unlock(&aspm_lock);
935 out:
936 	up_read(&pci_bus_sem);
937 }
938 
939 /* Recheck latencies and update aspm_capable for links under the root */
940 static void pcie_update_aspm_capable(struct pcie_link_state *root)
941 {
942 	struct pcie_link_state *link;
943 	BUG_ON(root->parent);
944 	list_for_each_entry(link, &link_list, sibling) {
945 		if (link->root != root)
946 			continue;
947 		link->aspm_capable = link->aspm_support;
948 	}
949 	list_for_each_entry(link, &link_list, sibling) {
950 		struct pci_dev *child;
951 		struct pci_bus *linkbus = link->pdev->subordinate;
952 		if (link->root != root)
953 			continue;
954 		list_for_each_entry(child, &linkbus->devices, bus_list) {
955 			if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) &&
956 			    (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END))
957 				continue;
958 			pcie_aspm_check_latency(child);
959 		}
960 	}
961 }
962 
963 /* @pdev: the endpoint device */
964 void pcie_aspm_exit_link_state(struct pci_dev *pdev)
965 {
966 	struct pci_dev *parent = pdev->bus->self;
967 	struct pcie_link_state *link, *root, *parent_link;
968 
969 	if (!parent || !parent->link_state)
970 		return;
971 
972 	down_read(&pci_bus_sem);
973 	mutex_lock(&aspm_lock);
974 
975 	link = parent->link_state;
976 	root = link->root;
977 	parent_link = link->parent;
978 
979 	/*
980 	 * link->downstream is a pointer to the pci_dev of function 0.  If
981 	 * we remove that function, the pci_dev is about to be deallocated,
982 	 * so we can't use link->downstream again.  Free the link state to
983 	 * avoid this.
984 	 *
985 	 * If we're removing a non-0 function, it's possible we could
986 	 * retain the link state, but PCIe r6.0, sec 7.5.3.7, recommends
987 	 * programming the same ASPM Control value for all functions of
988 	 * multi-function devices, so disable ASPM for all of them.
989 	 */
990 	pcie_config_aspm_link(link, 0);
991 	list_del(&link->sibling);
992 	free_link_state(link);
993 
994 	/* Recheck latencies and configure upstream links */
995 	if (parent_link) {
996 		pcie_update_aspm_capable(root);
997 		pcie_config_aspm_path(parent_link);
998 	}
999 
1000 	mutex_unlock(&aspm_lock);
1001 	up_read(&pci_bus_sem);
1002 }
1003 
1004 /* @pdev: the root port or switch downstream port */
1005 void pcie_aspm_pm_state_change(struct pci_dev *pdev)
1006 {
1007 	struct pcie_link_state *link = pdev->link_state;
1008 
1009 	if (aspm_disabled || !link)
1010 		return;
1011 	/*
1012 	 * Devices changed PM state, we should recheck if latency
1013 	 * meets all functions' requirement
1014 	 */
1015 	down_read(&pci_bus_sem);
1016 	mutex_lock(&aspm_lock);
1017 	pcie_update_aspm_capable(link->root);
1018 	pcie_config_aspm_path(link);
1019 	mutex_unlock(&aspm_lock);
1020 	up_read(&pci_bus_sem);
1021 }
1022 
1023 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
1024 {
1025 	struct pcie_link_state *link = pdev->link_state;
1026 
1027 	if (aspm_disabled || !link)
1028 		return;
1029 
1030 	if (aspm_policy != POLICY_POWERSAVE &&
1031 	    aspm_policy != POLICY_POWER_SUPERSAVE)
1032 		return;
1033 
1034 	down_read(&pci_bus_sem);
1035 	mutex_lock(&aspm_lock);
1036 	pcie_config_aspm_path(link);
1037 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1038 	mutex_unlock(&aspm_lock);
1039 	up_read(&pci_bus_sem);
1040 }
1041 
1042 static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
1043 {
1044 	struct pci_dev *bridge;
1045 
1046 	if (!pci_is_pcie(pdev))
1047 		return NULL;
1048 
1049 	bridge = pci_upstream_bridge(pdev);
1050 	if (!bridge || !pci_is_pcie(bridge))
1051 		return NULL;
1052 
1053 	return bridge->link_state;
1054 }
1055 
1056 static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
1057 {
1058 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1059 
1060 	if (!link)
1061 		return -EINVAL;
1062 	/*
1063 	 * A driver requested that ASPM be disabled on this device, but
1064 	 * if we don't have permission to manage ASPM (e.g., on ACPI
1065 	 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1066 	 * the _OSC method), we can't honor that request.  Windows has
1067 	 * a similar mechanism using "PciASPMOptOut", which is also
1068 	 * ignored in this situation.
1069 	 */
1070 	if (aspm_disabled) {
1071 		pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n");
1072 		return -EPERM;
1073 	}
1074 
1075 	if (sem)
1076 		down_read(&pci_bus_sem);
1077 	mutex_lock(&aspm_lock);
1078 	if (state & PCIE_LINK_STATE_L0S)
1079 		link->aspm_disable |= ASPM_STATE_L0S;
1080 	if (state & PCIE_LINK_STATE_L1)
1081 		/* L1 PM substates require L1 */
1082 		link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
1083 	if (state & PCIE_LINK_STATE_L1_1)
1084 		link->aspm_disable |= ASPM_STATE_L1_1;
1085 	if (state & PCIE_LINK_STATE_L1_2)
1086 		link->aspm_disable |= ASPM_STATE_L1_2;
1087 	if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1088 		link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
1089 	if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1090 		link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
1091 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
1092 
1093 	if (state & PCIE_LINK_STATE_CLKPM)
1094 		link->clkpm_disable = 1;
1095 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1096 	mutex_unlock(&aspm_lock);
1097 	if (sem)
1098 		up_read(&pci_bus_sem);
1099 
1100 	return 0;
1101 }
1102 
1103 int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
1104 {
1105 	return __pci_disable_link_state(pdev, state, false);
1106 }
1107 EXPORT_SYMBOL(pci_disable_link_state_locked);
1108 
1109 /**
1110  * pci_disable_link_state - Disable device's link state, so the link will
1111  * never enter specific states.  Note that if the BIOS didn't grant ASPM
1112  * control to the OS, this does nothing because we can't touch the LNKCTL
1113  * register. Returns 0 or a negative errno.
1114  *
1115  * @pdev: PCI device
1116  * @state: ASPM link state to disable
1117  */
1118 int pci_disable_link_state(struct pci_dev *pdev, int state)
1119 {
1120 	return __pci_disable_link_state(pdev, state, true);
1121 }
1122 EXPORT_SYMBOL(pci_disable_link_state);
1123 
1124 static int __pci_enable_link_state(struct pci_dev *pdev, int state, bool locked)
1125 {
1126 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1127 
1128 	if (!link)
1129 		return -EINVAL;
1130 	/*
1131 	 * A driver requested that ASPM be enabled on this device, but
1132 	 * if we don't have permission to manage ASPM (e.g., on ACPI
1133 	 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1134 	 * the _OSC method), we can't honor that request.
1135 	 */
1136 	if (aspm_disabled) {
1137 		pci_warn(pdev, "can't override BIOS ASPM; OS doesn't have ASPM control\n");
1138 		return -EPERM;
1139 	}
1140 
1141 	if (!locked)
1142 		down_read(&pci_bus_sem);
1143 	mutex_lock(&aspm_lock);
1144 	link->aspm_default = 0;
1145 	if (state & PCIE_LINK_STATE_L0S)
1146 		link->aspm_default |= ASPM_STATE_L0S;
1147 	if (state & PCIE_LINK_STATE_L1)
1148 		link->aspm_default |= ASPM_STATE_L1;
1149 	/* L1 PM substates require L1 */
1150 	if (state & PCIE_LINK_STATE_L1_1)
1151 		link->aspm_default |= ASPM_STATE_L1_1 | ASPM_STATE_L1;
1152 	if (state & PCIE_LINK_STATE_L1_2)
1153 		link->aspm_default |= ASPM_STATE_L1_2 | ASPM_STATE_L1;
1154 	if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1155 		link->aspm_default |= ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1;
1156 	if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1157 		link->aspm_default |= ASPM_STATE_L1_2_PCIPM | ASPM_STATE_L1;
1158 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
1159 
1160 	link->clkpm_default = (state & PCIE_LINK_STATE_CLKPM) ? 1 : 0;
1161 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1162 	mutex_unlock(&aspm_lock);
1163 	if (!locked)
1164 		up_read(&pci_bus_sem);
1165 
1166 	return 0;
1167 }
1168 
1169 /**
1170  * pci_enable_link_state - Clear and set the default device link state so that
1171  * the link may be allowed to enter the specified states. Note that if the
1172  * BIOS didn't grant ASPM control to the OS, this does nothing because we can't
1173  * touch the LNKCTL register. Also note that this does not enable states
1174  * disabled by pci_disable_link_state(). Return 0 or a negative errno.
1175  *
1176  * @pdev: PCI device
1177  * @state: Mask of ASPM link states to enable
1178  */
1179 int pci_enable_link_state(struct pci_dev *pdev, int state)
1180 {
1181 	return __pci_enable_link_state(pdev, state, false);
1182 }
1183 EXPORT_SYMBOL(pci_enable_link_state);
1184 
1185 /**
1186  * pci_enable_link_state_locked - Clear and set the default device link state
1187  * so that the link may be allowed to enter the specified states. Note that if
1188  * the BIOS didn't grant ASPM control to the OS, this does nothing because we
1189  * can't touch the LNKCTL register. Also note that this does not enable states
1190  * disabled by pci_disable_link_state(). Return 0 or a negative errno.
1191  *
1192  * @pdev: PCI device
1193  * @state: Mask of ASPM link states to enable
1194  *
1195  * Context: Caller holds pci_bus_sem read lock.
1196  */
1197 int pci_enable_link_state_locked(struct pci_dev *pdev, int state)
1198 {
1199 	lockdep_assert_held_read(&pci_bus_sem);
1200 
1201 	return __pci_enable_link_state(pdev, state, true);
1202 }
1203 EXPORT_SYMBOL(pci_enable_link_state_locked);
1204 
1205 static int pcie_aspm_set_policy(const char *val,
1206 				const struct kernel_param *kp)
1207 {
1208 	int i;
1209 	struct pcie_link_state *link;
1210 
1211 	if (aspm_disabled)
1212 		return -EPERM;
1213 	i = sysfs_match_string(policy_str, val);
1214 	if (i < 0)
1215 		return i;
1216 	if (i == aspm_policy)
1217 		return 0;
1218 
1219 	down_read(&pci_bus_sem);
1220 	mutex_lock(&aspm_lock);
1221 	aspm_policy = i;
1222 	list_for_each_entry(link, &link_list, sibling) {
1223 		pcie_config_aspm_link(link, policy_to_aspm_state(link));
1224 		pcie_set_clkpm(link, policy_to_clkpm_state(link));
1225 	}
1226 	mutex_unlock(&aspm_lock);
1227 	up_read(&pci_bus_sem);
1228 	return 0;
1229 }
1230 
1231 static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
1232 {
1233 	int i, cnt = 0;
1234 	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
1235 		if (i == aspm_policy)
1236 			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
1237 		else
1238 			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
1239 	cnt += sprintf(buffer + cnt, "\n");
1240 	return cnt;
1241 }
1242 
1243 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
1244 	NULL, 0644);
1245 
1246 /**
1247  * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
1248  * @pdev: Target device.
1249  *
1250  * Relies on the upstream bridge's link_state being valid.  The link_state
1251  * is deallocated only when the last child of the bridge (i.e., @pdev or a
1252  * sibling) is removed, and the caller should be holding a reference to
1253  * @pdev, so this should be safe.
1254  */
1255 bool pcie_aspm_enabled(struct pci_dev *pdev)
1256 {
1257 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1258 
1259 	if (!link)
1260 		return false;
1261 
1262 	return link->aspm_enabled;
1263 }
1264 EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
1265 
1266 static ssize_t aspm_attr_show_common(struct device *dev,
1267 				     struct device_attribute *attr,
1268 				     char *buf, u8 state)
1269 {
1270 	struct pci_dev *pdev = to_pci_dev(dev);
1271 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1272 
1273 	return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0);
1274 }
1275 
1276 static ssize_t aspm_attr_store_common(struct device *dev,
1277 				      struct device_attribute *attr,
1278 				      const char *buf, size_t len, u8 state)
1279 {
1280 	struct pci_dev *pdev = to_pci_dev(dev);
1281 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1282 	bool state_enable;
1283 
1284 	if (kstrtobool(buf, &state_enable) < 0)
1285 		return -EINVAL;
1286 
1287 	down_read(&pci_bus_sem);
1288 	mutex_lock(&aspm_lock);
1289 
1290 	if (state_enable) {
1291 		link->aspm_disable &= ~state;
1292 		/* need to enable L1 for substates */
1293 		if (state & ASPM_STATE_L1SS)
1294 			link->aspm_disable &= ~ASPM_STATE_L1;
1295 	} else {
1296 		link->aspm_disable |= state;
1297 		if (state & ASPM_STATE_L1)
1298 			link->aspm_disable |= ASPM_STATE_L1SS;
1299 	}
1300 
1301 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
1302 
1303 	mutex_unlock(&aspm_lock);
1304 	up_read(&pci_bus_sem);
1305 
1306 	return len;
1307 }
1308 
1309 #define ASPM_ATTR(_f, _s)						\
1310 static ssize_t _f##_show(struct device *dev,				\
1311 			 struct device_attribute *attr, char *buf)	\
1312 { return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); }	\
1313 									\
1314 static ssize_t _f##_store(struct device *dev,				\
1315 			  struct device_attribute *attr,		\
1316 			  const char *buf, size_t len)			\
1317 { return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
1318 
1319 ASPM_ATTR(l0s_aspm, L0S)
1320 ASPM_ATTR(l1_aspm, L1)
1321 ASPM_ATTR(l1_1_aspm, L1_1)
1322 ASPM_ATTR(l1_2_aspm, L1_2)
1323 ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
1324 ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
1325 
1326 static ssize_t clkpm_show(struct device *dev,
1327 			  struct device_attribute *attr, char *buf)
1328 {
1329 	struct pci_dev *pdev = to_pci_dev(dev);
1330 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1331 
1332 	return sysfs_emit(buf, "%d\n", link->clkpm_enabled);
1333 }
1334 
1335 static ssize_t clkpm_store(struct device *dev,
1336 			   struct device_attribute *attr,
1337 			   const char *buf, size_t len)
1338 {
1339 	struct pci_dev *pdev = to_pci_dev(dev);
1340 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1341 	bool state_enable;
1342 
1343 	if (kstrtobool(buf, &state_enable) < 0)
1344 		return -EINVAL;
1345 
1346 	down_read(&pci_bus_sem);
1347 	mutex_lock(&aspm_lock);
1348 
1349 	link->clkpm_disable = !state_enable;
1350 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1351 
1352 	mutex_unlock(&aspm_lock);
1353 	up_read(&pci_bus_sem);
1354 
1355 	return len;
1356 }
1357 
1358 static DEVICE_ATTR_RW(clkpm);
1359 static DEVICE_ATTR_RW(l0s_aspm);
1360 static DEVICE_ATTR_RW(l1_aspm);
1361 static DEVICE_ATTR_RW(l1_1_aspm);
1362 static DEVICE_ATTR_RW(l1_2_aspm);
1363 static DEVICE_ATTR_RW(l1_1_pcipm);
1364 static DEVICE_ATTR_RW(l1_2_pcipm);
1365 
1366 static struct attribute *aspm_ctrl_attrs[] = {
1367 	&dev_attr_clkpm.attr,
1368 	&dev_attr_l0s_aspm.attr,
1369 	&dev_attr_l1_aspm.attr,
1370 	&dev_attr_l1_1_aspm.attr,
1371 	&dev_attr_l1_2_aspm.attr,
1372 	&dev_attr_l1_1_pcipm.attr,
1373 	&dev_attr_l1_2_pcipm.attr,
1374 	NULL
1375 };
1376 
1377 static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
1378 					   struct attribute *a, int n)
1379 {
1380 	struct device *dev = kobj_to_dev(kobj);
1381 	struct pci_dev *pdev = to_pci_dev(dev);
1382 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1383 	static const u8 aspm_state_map[] = {
1384 		ASPM_STATE_L0S,
1385 		ASPM_STATE_L1,
1386 		ASPM_STATE_L1_1,
1387 		ASPM_STATE_L1_2,
1388 		ASPM_STATE_L1_1_PCIPM,
1389 		ASPM_STATE_L1_2_PCIPM,
1390 	};
1391 
1392 	if (aspm_disabled || !link)
1393 		return 0;
1394 
1395 	if (n == 0)
1396 		return link->clkpm_capable ? a->mode : 0;
1397 
1398 	return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0;
1399 }
1400 
1401 const struct attribute_group aspm_ctrl_attr_group = {
1402 	.name = "link",
1403 	.attrs = aspm_ctrl_attrs,
1404 	.is_visible = aspm_ctrl_attrs_are_visible,
1405 };
1406 
1407 static int __init pcie_aspm_disable(char *str)
1408 {
1409 	if (!strcmp(str, "off")) {
1410 		aspm_policy = POLICY_DEFAULT;
1411 		aspm_disabled = 1;
1412 		aspm_support_enabled = false;
1413 		printk(KERN_INFO "PCIe ASPM is disabled\n");
1414 	} else if (!strcmp(str, "force")) {
1415 		aspm_force = 1;
1416 		printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
1417 	}
1418 	return 1;
1419 }
1420 
1421 __setup("pcie_aspm=", pcie_aspm_disable);
1422 
1423 void pcie_no_aspm(void)
1424 {
1425 	/*
1426 	 * Disabling ASPM is intended to prevent the kernel from modifying
1427 	 * existing hardware state, not to clear existing state. To that end:
1428 	 * (a) set policy to POLICY_DEFAULT in order to avoid changing state
1429 	 * (b) prevent userspace from changing policy
1430 	 */
1431 	if (!aspm_force) {
1432 		aspm_policy = POLICY_DEFAULT;
1433 		aspm_disabled = 1;
1434 	}
1435 }
1436 
1437 bool pcie_aspm_support_enabled(void)
1438 {
1439 	return aspm_support_enabled;
1440 }
1441