xref: /openbmc/linux/drivers/pci/pcie/aspm.c (revision 0a907292)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Enable PCIe link L0s/L1 state and Clock Power Management
4  *
5  * Copyright (C) 2007 Intel
6  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
7  * Copyright (C) Shaohua Li (shaohua.li@intel.com)
8  */
9 
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/moduleparam.h>
13 #include <linux/pci.h>
14 #include <linux/pci_regs.h>
15 #include <linux/errno.h>
16 #include <linux/pm.h>
17 #include <linux/init.h>
18 #include <linux/slab.h>
19 #include <linux/jiffies.h>
20 #include <linux/delay.h>
21 #include "../pci.h"
22 
23 #ifdef MODULE_PARAM_PREFIX
24 #undef MODULE_PARAM_PREFIX
25 #endif
26 #define MODULE_PARAM_PREFIX "pcie_aspm."
27 
28 /* Note: those are not register definitions */
29 #define ASPM_STATE_L0S_UP	(1)	/* Upstream direction L0s state */
30 #define ASPM_STATE_L0S_DW	(2)	/* Downstream direction L0s state */
31 #define ASPM_STATE_L1		(4)	/* L1 state */
32 #define ASPM_STATE_L1_1		(8)	/* ASPM L1.1 state */
33 #define ASPM_STATE_L1_2		(0x10)	/* ASPM L1.2 state */
34 #define ASPM_STATE_L1_1_PCIPM	(0x20)	/* PCI PM L1.1 state */
35 #define ASPM_STATE_L1_2_PCIPM	(0x40)	/* PCI PM L1.2 state */
36 #define ASPM_STATE_L1_SS_PCIPM	(ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
37 #define ASPM_STATE_L1_2_MASK	(ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
38 #define ASPM_STATE_L1SS		(ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
39 				 ASPM_STATE_L1_2_MASK)
40 #define ASPM_STATE_L0S		(ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
41 #define ASPM_STATE_ALL		(ASPM_STATE_L0S | ASPM_STATE_L1 |	\
42 				 ASPM_STATE_L1SS)
43 
44 struct aspm_latency {
45 	u32 l0s;			/* L0s latency (nsec) */
46 	u32 l1;				/* L1 latency (nsec) */
47 };
48 
49 struct pcie_link_state {
50 	struct pci_dev *pdev;		/* Upstream component of the Link */
51 	struct pci_dev *downstream;	/* Downstream component, function 0 */
52 	struct pcie_link_state *root;	/* pointer to the root port link */
53 	struct pcie_link_state *parent;	/* pointer to the parent Link state */
54 	struct list_head sibling;	/* node in link_list */
55 
56 	/* ASPM state */
57 	u32 aspm_support:7;		/* Supported ASPM state */
58 	u32 aspm_enabled:7;		/* Enabled ASPM state */
59 	u32 aspm_capable:7;		/* Capable ASPM state with latency */
60 	u32 aspm_default:7;		/* Default ASPM state by BIOS */
61 	u32 aspm_disable:7;		/* Disabled ASPM state */
62 
63 	/* Clock PM state */
64 	u32 clkpm_capable:1;		/* Clock PM capable? */
65 	u32 clkpm_enabled:1;		/* Current Clock PM state */
66 	u32 clkpm_default:1;		/* Default Clock PM state by BIOS */
67 	u32 clkpm_disable:1;		/* Clock PM disabled */
68 
69 	/* Exit latencies */
70 	struct aspm_latency latency_up;	/* Upstream direction exit latency */
71 	struct aspm_latency latency_dw;	/* Downstream direction exit latency */
72 	/*
73 	 * Endpoint acceptable latencies. A pcie downstream port only
74 	 * has one slot under it, so at most there are 8 functions.
75 	 */
76 	struct aspm_latency acceptable[8];
77 };
78 
79 static int aspm_disabled, aspm_force;
80 static bool aspm_support_enabled = true;
81 static DEFINE_MUTEX(aspm_lock);
82 static LIST_HEAD(link_list);
83 
84 #define POLICY_DEFAULT 0	/* BIOS default setting */
85 #define POLICY_PERFORMANCE 1	/* high performance */
86 #define POLICY_POWERSAVE 2	/* high power saving */
87 #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
88 
89 #ifdef CONFIG_PCIEASPM_PERFORMANCE
90 static int aspm_policy = POLICY_PERFORMANCE;
91 #elif defined CONFIG_PCIEASPM_POWERSAVE
92 static int aspm_policy = POLICY_POWERSAVE;
93 #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
94 static int aspm_policy = POLICY_POWER_SUPERSAVE;
95 #else
96 static int aspm_policy;
97 #endif
98 
99 static const char *policy_str[] = {
100 	[POLICY_DEFAULT] = "default",
101 	[POLICY_PERFORMANCE] = "performance",
102 	[POLICY_POWERSAVE] = "powersave",
103 	[POLICY_POWER_SUPERSAVE] = "powersupersave"
104 };
105 
106 #define LINK_RETRAIN_TIMEOUT HZ
107 
108 static int policy_to_aspm_state(struct pcie_link_state *link)
109 {
110 	switch (aspm_policy) {
111 	case POLICY_PERFORMANCE:
112 		/* Disable ASPM and Clock PM */
113 		return 0;
114 	case POLICY_POWERSAVE:
115 		/* Enable ASPM L0s/L1 */
116 		return (ASPM_STATE_L0S | ASPM_STATE_L1);
117 	case POLICY_POWER_SUPERSAVE:
118 		/* Enable Everything */
119 		return ASPM_STATE_ALL;
120 	case POLICY_DEFAULT:
121 		return link->aspm_default;
122 	}
123 	return 0;
124 }
125 
126 static int policy_to_clkpm_state(struct pcie_link_state *link)
127 {
128 	switch (aspm_policy) {
129 	case POLICY_PERFORMANCE:
130 		/* Disable ASPM and Clock PM */
131 		return 0;
132 	case POLICY_POWERSAVE:
133 	case POLICY_POWER_SUPERSAVE:
134 		/* Enable Clock PM */
135 		return 1;
136 	case POLICY_DEFAULT:
137 		return link->clkpm_default;
138 	}
139 	return 0;
140 }
141 
142 static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
143 {
144 	struct pci_dev *child;
145 	struct pci_bus *linkbus = link->pdev->subordinate;
146 	u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0;
147 
148 	list_for_each_entry(child, &linkbus->devices, bus_list)
149 		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
150 						   PCI_EXP_LNKCTL_CLKREQ_EN,
151 						   val);
152 	link->clkpm_enabled = !!enable;
153 }
154 
155 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
156 {
157 	/*
158 	 * Don't enable Clock PM if the link is not Clock PM capable
159 	 * or Clock PM is disabled
160 	 */
161 	if (!link->clkpm_capable || link->clkpm_disable)
162 		enable = 0;
163 	/* Need nothing if the specified equals to current state */
164 	if (link->clkpm_enabled == enable)
165 		return;
166 	pcie_set_clkpm_nocheck(link, enable);
167 }
168 
169 static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
170 {
171 	int capable = 1, enabled = 1;
172 	u32 reg32;
173 	u16 reg16;
174 	struct pci_dev *child;
175 	struct pci_bus *linkbus = link->pdev->subordinate;
176 
177 	/* All functions should have the same cap and state, take the worst */
178 	list_for_each_entry(child, &linkbus->devices, bus_list) {
179 		pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &reg32);
180 		if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
181 			capable = 0;
182 			enabled = 0;
183 			break;
184 		}
185 		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
186 		if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
187 			enabled = 0;
188 	}
189 	link->clkpm_enabled = enabled;
190 	link->clkpm_default = enabled;
191 	link->clkpm_capable = capable;
192 	link->clkpm_disable = blacklist ? 1 : 0;
193 }
194 
195 static bool pcie_retrain_link(struct pcie_link_state *link)
196 {
197 	struct pci_dev *parent = link->pdev;
198 	unsigned long end_jiffies;
199 	u16 reg16;
200 
201 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
202 	reg16 |= PCI_EXP_LNKCTL_RL;
203 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
204 	if (parent->clear_retrain_link) {
205 		/*
206 		 * Due to an erratum in some devices the Retrain Link bit
207 		 * needs to be cleared again manually to allow the link
208 		 * training to succeed.
209 		 */
210 		reg16 &= ~PCI_EXP_LNKCTL_RL;
211 		pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
212 	}
213 
214 	/* Wait for link training end. Break out after waiting for timeout */
215 	end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
216 	do {
217 		pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
218 		if (!(reg16 & PCI_EXP_LNKSTA_LT))
219 			break;
220 		msleep(1);
221 	} while (time_before(jiffies, end_jiffies));
222 	return !(reg16 & PCI_EXP_LNKSTA_LT);
223 }
224 
225 /*
226  * pcie_aspm_configure_common_clock: check if the 2 ends of a link
227  *   could use common clock. If they are, configure them to use the
228  *   common clock. That will reduce the ASPM state exit latency.
229  */
230 static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
231 {
232 	int same_clock = 1;
233 	u16 reg16, parent_reg, child_reg[8];
234 	struct pci_dev *child, *parent = link->pdev;
235 	struct pci_bus *linkbus = parent->subordinate;
236 	/*
237 	 * All functions of a slot should have the same Slot Clock
238 	 * Configuration, so just check one function
239 	 */
240 	child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
241 	BUG_ON(!pci_is_pcie(child));
242 
243 	/* Check downstream component if bit Slot Clock Configuration is 1 */
244 	pcie_capability_read_word(child, PCI_EXP_LNKSTA, &reg16);
245 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
246 		same_clock = 0;
247 
248 	/* Check upstream component if bit Slot Clock Configuration is 1 */
249 	pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
250 	if (!(reg16 & PCI_EXP_LNKSTA_SLC))
251 		same_clock = 0;
252 
253 	/* Port might be already in common clock mode */
254 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
255 	if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) {
256 		bool consistent = true;
257 
258 		list_for_each_entry(child, &linkbus->devices, bus_list) {
259 			pcie_capability_read_word(child, PCI_EXP_LNKCTL,
260 						  &reg16);
261 			if (!(reg16 & PCI_EXP_LNKCTL_CCC)) {
262 				consistent = false;
263 				break;
264 			}
265 		}
266 		if (consistent)
267 			return;
268 		pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n");
269 	}
270 
271 	/* Configure downstream component, all functions */
272 	list_for_each_entry(child, &linkbus->devices, bus_list) {
273 		pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
274 		child_reg[PCI_FUNC(child->devfn)] = reg16;
275 		if (same_clock)
276 			reg16 |= PCI_EXP_LNKCTL_CCC;
277 		else
278 			reg16 &= ~PCI_EXP_LNKCTL_CCC;
279 		pcie_capability_write_word(child, PCI_EXP_LNKCTL, reg16);
280 	}
281 
282 	/* Configure upstream component */
283 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
284 	parent_reg = reg16;
285 	if (same_clock)
286 		reg16 |= PCI_EXP_LNKCTL_CCC;
287 	else
288 		reg16 &= ~PCI_EXP_LNKCTL_CCC;
289 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
290 
291 	if (pcie_retrain_link(link))
292 		return;
293 
294 	/* Training failed. Restore common clock configurations */
295 	pci_err(parent, "ASPM: Could not configure common clock\n");
296 	list_for_each_entry(child, &linkbus->devices, bus_list)
297 		pcie_capability_write_word(child, PCI_EXP_LNKCTL,
298 					   child_reg[PCI_FUNC(child->devfn)]);
299 	pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg);
300 }
301 
302 /* Convert L0s latency encoding to ns */
303 static u32 calc_l0s_latency(u32 lnkcap)
304 {
305 	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12;
306 
307 	if (encoding == 0x7)
308 		return (5 * 1000);	/* > 4us */
309 	return (64 << encoding);
310 }
311 
312 /* Convert L0s acceptable latency encoding to ns */
313 static u32 calc_l0s_acceptable(u32 encoding)
314 {
315 	if (encoding == 0x7)
316 		return -1U;
317 	return (64 << encoding);
318 }
319 
320 /* Convert L1 latency encoding to ns */
321 static u32 calc_l1_latency(u32 lnkcap)
322 {
323 	u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15;
324 
325 	if (encoding == 0x7)
326 		return (65 * 1000);	/* > 64us */
327 	return (1000 << encoding);
328 }
329 
330 /* Convert L1 acceptable latency encoding to ns */
331 static u32 calc_l1_acceptable(u32 encoding)
332 {
333 	if (encoding == 0x7)
334 		return -1U;
335 	return (1000 << encoding);
336 }
337 
338 /* Convert L1SS T_pwr encoding to usec */
339 static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
340 {
341 	switch (scale) {
342 	case 0:
343 		return val * 2;
344 	case 1:
345 		return val * 10;
346 	case 2:
347 		return val * 100;
348 	}
349 	pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale);
350 	return 0;
351 }
352 
353 static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
354 {
355 	u32 threshold_ns = threshold_us * 1000;
356 
357 	/* See PCIe r3.1, sec 7.33.3 and sec 6.18 */
358 	if (threshold_ns < 32) {
359 		*scale = 0;
360 		*value = threshold_ns;
361 	} else if (threshold_ns < 1024) {
362 		*scale = 1;
363 		*value = threshold_ns >> 5;
364 	} else if (threshold_ns < 32768) {
365 		*scale = 2;
366 		*value = threshold_ns >> 10;
367 	} else if (threshold_ns < 1048576) {
368 		*scale = 3;
369 		*value = threshold_ns >> 15;
370 	} else if (threshold_ns < 33554432) {
371 		*scale = 4;
372 		*value = threshold_ns >> 20;
373 	} else {
374 		*scale = 5;
375 		*value = threshold_ns >> 25;
376 	}
377 }
378 
379 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
380 {
381 	u32 latency, l1_switch_latency = 0;
382 	struct aspm_latency *acceptable;
383 	struct pcie_link_state *link;
384 
385 	/* Device not in D0 doesn't need latency check */
386 	if ((endpoint->current_state != PCI_D0) &&
387 	    (endpoint->current_state != PCI_UNKNOWN))
388 		return;
389 
390 	link = endpoint->bus->self->link_state;
391 	acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
392 
393 	while (link) {
394 		/* Check upstream direction L0s latency */
395 		if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
396 		    (link->latency_up.l0s > acceptable->l0s))
397 			link->aspm_capable &= ~ASPM_STATE_L0S_UP;
398 
399 		/* Check downstream direction L0s latency */
400 		if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
401 		    (link->latency_dw.l0s > acceptable->l0s))
402 			link->aspm_capable &= ~ASPM_STATE_L0S_DW;
403 		/*
404 		 * Check L1 latency.
405 		 * Every switch on the path to root complex need 1
406 		 * more microsecond for L1. Spec doesn't mention L0s.
407 		 *
408 		 * The exit latencies for L1 substates are not advertised
409 		 * by a device.  Since the spec also doesn't mention a way
410 		 * to determine max latencies introduced by enabling L1
411 		 * substates on the components, it is not clear how to do
412 		 * a L1 substate exit latency check.  We assume that the
413 		 * L1 exit latencies advertised by a device include L1
414 		 * substate latencies (and hence do not do any check).
415 		 */
416 		latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
417 		if ((link->aspm_capable & ASPM_STATE_L1) &&
418 		    (latency + l1_switch_latency > acceptable->l1))
419 			link->aspm_capable &= ~ASPM_STATE_L1;
420 		l1_switch_latency += 1000;
421 
422 		link = link->parent;
423 	}
424 }
425 
426 /*
427  * The L1 PM substate capability is only implemented in function 0 in a
428  * multi function device.
429  */
430 static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
431 {
432 	struct pci_dev *child;
433 
434 	list_for_each_entry(child, &linkbus->devices, bus_list)
435 		if (PCI_FUNC(child->devfn) == 0)
436 			return child;
437 	return NULL;
438 }
439 
440 static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
441 				    u32 clear, u32 set)
442 {
443 	u32 val;
444 
445 	pci_read_config_dword(pdev, pos, &val);
446 	val &= ~clear;
447 	val |= set;
448 	pci_write_config_dword(pdev, pos, val);
449 }
450 
451 /* Calculate L1.2 PM substate timing parameters */
452 static void aspm_calc_l1ss_info(struct pcie_link_state *link,
453 				u32 parent_l1ss_cap, u32 child_l1ss_cap)
454 {
455 	struct pci_dev *child = link->downstream, *parent = link->pdev;
456 	u32 val1, val2, scale1, scale2;
457 	u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
458 	u32 ctl1 = 0, ctl2 = 0;
459 	u32 pctl1, pctl2, cctl1, cctl2;
460 	u32 pl1_2_enables, cl1_2_enables;
461 
462 	if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
463 		return;
464 
465 	/* Choose the greater of the two Port Common_Mode_Restore_Times */
466 	val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
467 	val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
468 	t_common_mode = max(val1, val2);
469 
470 	/* Choose the greater of the two Port T_POWER_ON times */
471 	val1   = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
472 	scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
473 	val2   = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
474 	scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
475 
476 	if (calc_l1ss_pwron(parent, scale1, val1) >
477 	    calc_l1ss_pwron(child, scale2, val2)) {
478 		ctl2 |= scale1 | (val1 << 3);
479 		t_power_on = calc_l1ss_pwron(parent, scale1, val1);
480 	} else {
481 		ctl2 |= scale2 | (val2 << 3);
482 		t_power_on = calc_l1ss_pwron(child, scale2, val2);
483 	}
484 
485 	/*
486 	 * Set LTR_L1.2_THRESHOLD to the time required to transition the
487 	 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
488 	 * downstream devices report (via LTR) that they can tolerate at
489 	 * least that much latency.
490 	 *
491 	 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
492 	 * Table 5-11.  T(POWER_OFF) is at most 2us and T(L1.2) is at
493 	 * least 4us.
494 	 */
495 	l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
496 	encode_l12_threshold(l1_2_threshold, &scale, &value);
497 	ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
498 
499 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1);
500 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2);
501 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1);
502 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2);
503 
504 	if (ctl1 == pctl1 && ctl1 == cctl1 &&
505 	    ctl2 == pctl2 && ctl2 == cctl2)
506 		return;
507 
508 	/* Disable L1.2 while updating.  See PCIe r5.0, sec 5.5.4, 7.8.3.3 */
509 	pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK;
510 	cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK;
511 
512 	if (pl1_2_enables || cl1_2_enables) {
513 		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
514 					PCI_L1SS_CTL1_L1_2_MASK, 0);
515 		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
516 					PCI_L1SS_CTL1_L1_2_MASK, 0);
517 	}
518 
519 	/* Program T_POWER_ON times in both ports */
520 	pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2);
521 	pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2);
522 
523 	/* Program Common_Mode_Restore_Time in upstream device */
524 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
525 				PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1);
526 
527 	/* Program LTR_L1.2_THRESHOLD time in both ports */
528 	pci_clear_and_set_dword(parent,	parent->l1ss + PCI_L1SS_CTL1,
529 				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
530 				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
531 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
532 				PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
533 				PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1);
534 
535 	if (pl1_2_enables || cl1_2_enables) {
536 		pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0,
537 					pl1_2_enables);
538 		pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0,
539 					cl1_2_enables);
540 	}
541 }
542 
543 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
544 {
545 	struct pci_dev *child = link->downstream, *parent = link->pdev;
546 	u32 parent_lnkcap, child_lnkcap;
547 	u16 parent_lnkctl, child_lnkctl;
548 	u32 parent_l1ss_cap, child_l1ss_cap;
549 	u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0;
550 	struct pci_bus *linkbus = parent->subordinate;
551 
552 	if (blacklist) {
553 		/* Set enabled/disable so that we will disable ASPM later */
554 		link->aspm_enabled = ASPM_STATE_ALL;
555 		link->aspm_disable = ASPM_STATE_ALL;
556 		return;
557 	}
558 
559 	/*
560 	 * If ASPM not supported, don't mess with the clocks and link,
561 	 * bail out now.
562 	 */
563 	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
564 	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
565 	if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS))
566 		return;
567 
568 	/* Configure common clock before checking latencies */
569 	pcie_aspm_configure_common_clock(link);
570 
571 	/*
572 	 * Re-read upstream/downstream components' register state after
573 	 * clock configuration.  L0s & L1 exit latencies in the otherwise
574 	 * read-only Link Capabilities may change depending on common clock
575 	 * configuration (PCIe r5.0, sec 7.5.3.6).
576 	 */
577 	pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap);
578 	pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap);
579 	pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl);
580 	pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl);
581 
582 	/*
583 	 * Setup L0s state
584 	 *
585 	 * Note that we must not enable L0s in either direction on a
586 	 * given link unless components on both sides of the link each
587 	 * support L0s.
588 	 */
589 	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S)
590 		link->aspm_support |= ASPM_STATE_L0S;
591 
592 	if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
593 		link->aspm_enabled |= ASPM_STATE_L0S_UP;
594 	if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S)
595 		link->aspm_enabled |= ASPM_STATE_L0S_DW;
596 	link->latency_up.l0s = calc_l0s_latency(parent_lnkcap);
597 	link->latency_dw.l0s = calc_l0s_latency(child_lnkcap);
598 
599 	/* Setup L1 state */
600 	if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1)
601 		link->aspm_support |= ASPM_STATE_L1;
602 
603 	if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1)
604 		link->aspm_enabled |= ASPM_STATE_L1;
605 	link->latency_up.l1 = calc_l1_latency(parent_lnkcap);
606 	link->latency_dw.l1 = calc_l1_latency(child_lnkcap);
607 
608 	/* Setup L1 substate */
609 	pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP,
610 			      &parent_l1ss_cap);
611 	pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP,
612 			      &child_l1ss_cap);
613 
614 	if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
615 		parent_l1ss_cap = 0;
616 	if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS))
617 		child_l1ss_cap = 0;
618 
619 	/*
620 	 * If we don't have LTR for the entire path from the Root Complex
621 	 * to this device, we can't use ASPM L1.2 because it relies on the
622 	 * LTR_L1.2_THRESHOLD.  See PCIe r4.0, secs 5.5.4, 6.18.
623 	 */
624 	if (!child->ltr_path)
625 		child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2;
626 
627 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
628 		link->aspm_support |= ASPM_STATE_L1_1;
629 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
630 		link->aspm_support |= ASPM_STATE_L1_2;
631 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
632 		link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
633 	if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
634 		link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
635 
636 	if (parent_l1ss_cap)
637 		pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
638 				      &parent_l1ss_ctl1);
639 	if (child_l1ss_cap)
640 		pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1,
641 				      &child_l1ss_ctl1);
642 
643 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
644 		link->aspm_enabled |= ASPM_STATE_L1_1;
645 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
646 		link->aspm_enabled |= ASPM_STATE_L1_2;
647 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
648 		link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
649 	if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
650 		link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
651 
652 	if (link->aspm_support & ASPM_STATE_L1SS)
653 		aspm_calc_l1ss_info(link, parent_l1ss_cap, child_l1ss_cap);
654 
655 	/* Save default state */
656 	link->aspm_default = link->aspm_enabled;
657 
658 	/* Setup initial capable state. Will be updated later */
659 	link->aspm_capable = link->aspm_support;
660 
661 	/* Get and check endpoint acceptable latencies */
662 	list_for_each_entry(child, &linkbus->devices, bus_list) {
663 		u32 reg32, encoding;
664 		struct aspm_latency *acceptable =
665 			&link->acceptable[PCI_FUNC(child->devfn)];
666 
667 		if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
668 		    pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
669 			continue;
670 
671 		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
672 		/* Calculate endpoint L0s acceptable latency */
673 		encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
674 		acceptable->l0s = calc_l0s_acceptable(encoding);
675 		/* Calculate endpoint L1 acceptable latency */
676 		encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
677 		acceptable->l1 = calc_l1_acceptable(encoding);
678 
679 		pcie_aspm_check_latency(child);
680 	}
681 }
682 
683 /* Configure the ASPM L1 substates */
684 static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
685 {
686 	u32 val, enable_req;
687 	struct pci_dev *child = link->downstream, *parent = link->pdev;
688 
689 	enable_req = (link->aspm_enabled ^ state) & state;
690 
691 	/*
692 	 * Here are the rules specified in the PCIe spec for enabling L1SS:
693 	 * - When enabling L1.x, enable bit at parent first, then at child
694 	 * - When disabling L1.x, disable bit at child first, then at parent
695 	 * - When enabling ASPM L1.x, need to disable L1
696 	 *   (at child followed by parent).
697 	 * - The ASPM/PCIPM L1.2 must be disabled while programming timing
698 	 *   parameters
699 	 *
700 	 * To keep it simple, disable all L1SS bits first, and later enable
701 	 * what is needed.
702 	 */
703 
704 	/* Disable all L1 substates */
705 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
706 				PCI_L1SS_CTL1_L1SS_MASK, 0);
707 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
708 				PCI_L1SS_CTL1_L1SS_MASK, 0);
709 	/*
710 	 * If needed, disable L1, and it gets enabled later
711 	 * in pcie_config_aspm_link().
712 	 */
713 	if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
714 		pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
715 						   PCI_EXP_LNKCTL_ASPM_L1, 0);
716 		pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
717 						   PCI_EXP_LNKCTL_ASPM_L1, 0);
718 	}
719 
720 	val = 0;
721 	if (state & ASPM_STATE_L1_1)
722 		val |= PCI_L1SS_CTL1_ASPM_L1_1;
723 	if (state & ASPM_STATE_L1_2)
724 		val |= PCI_L1SS_CTL1_ASPM_L1_2;
725 	if (state & ASPM_STATE_L1_1_PCIPM)
726 		val |= PCI_L1SS_CTL1_PCIPM_L1_1;
727 	if (state & ASPM_STATE_L1_2_PCIPM)
728 		val |= PCI_L1SS_CTL1_PCIPM_L1_2;
729 
730 	/* Enable what we need to enable */
731 	pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1,
732 				PCI_L1SS_CTL1_L1SS_MASK, val);
733 	pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1,
734 				PCI_L1SS_CTL1_L1SS_MASK, val);
735 }
736 
737 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
738 {
739 	pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
740 					   PCI_EXP_LNKCTL_ASPMC, val);
741 }
742 
743 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
744 {
745 	u32 upstream = 0, dwstream = 0;
746 	struct pci_dev *child = link->downstream, *parent = link->pdev;
747 	struct pci_bus *linkbus = parent->subordinate;
748 
749 	/* Enable only the states that were not explicitly disabled */
750 	state &= (link->aspm_capable & ~link->aspm_disable);
751 
752 	/* Can't enable any substates if L1 is not enabled */
753 	if (!(state & ASPM_STATE_L1))
754 		state &= ~ASPM_STATE_L1SS;
755 
756 	/* Spec says both ports must be in D0 before enabling PCI PM substates*/
757 	if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
758 		state &= ~ASPM_STATE_L1_SS_PCIPM;
759 		state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
760 	}
761 
762 	/* Nothing to do if the link is already in the requested state */
763 	if (link->aspm_enabled == state)
764 		return;
765 	/* Convert ASPM state to upstream/downstream ASPM register state */
766 	if (state & ASPM_STATE_L0S_UP)
767 		dwstream |= PCI_EXP_LNKCTL_ASPM_L0S;
768 	if (state & ASPM_STATE_L0S_DW)
769 		upstream |= PCI_EXP_LNKCTL_ASPM_L0S;
770 	if (state & ASPM_STATE_L1) {
771 		upstream |= PCI_EXP_LNKCTL_ASPM_L1;
772 		dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
773 	}
774 
775 	if (link->aspm_capable & ASPM_STATE_L1SS)
776 		pcie_config_aspm_l1ss(link, state);
777 
778 	/*
779 	 * Spec 2.0 suggests all functions should be configured the
780 	 * same setting for ASPM. Enabling ASPM L1 should be done in
781 	 * upstream component first and then downstream, and vice
782 	 * versa for disabling ASPM L1. Spec doesn't mention L0S.
783 	 */
784 	if (state & ASPM_STATE_L1)
785 		pcie_config_aspm_dev(parent, upstream);
786 	list_for_each_entry(child, &linkbus->devices, bus_list)
787 		pcie_config_aspm_dev(child, dwstream);
788 	if (!(state & ASPM_STATE_L1))
789 		pcie_config_aspm_dev(parent, upstream);
790 
791 	link->aspm_enabled = state;
792 }
793 
794 static void pcie_config_aspm_path(struct pcie_link_state *link)
795 {
796 	while (link) {
797 		pcie_config_aspm_link(link, policy_to_aspm_state(link));
798 		link = link->parent;
799 	}
800 }
801 
802 static void free_link_state(struct pcie_link_state *link)
803 {
804 	link->pdev->link_state = NULL;
805 	kfree(link);
806 }
807 
808 static int pcie_aspm_sanity_check(struct pci_dev *pdev)
809 {
810 	struct pci_dev *child;
811 	u32 reg32;
812 
813 	/*
814 	 * Some functions in a slot might not all be PCIe functions,
815 	 * very strange. Disable ASPM for the whole slot
816 	 */
817 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
818 		if (!pci_is_pcie(child))
819 			return -EINVAL;
820 
821 		/*
822 		 * If ASPM is disabled then we're not going to change
823 		 * the BIOS state. It's safe to continue even if it's a
824 		 * pre-1.1 device
825 		 */
826 
827 		if (aspm_disabled)
828 			continue;
829 
830 		/*
831 		 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
832 		 * RBER bit to determine if a function is 1.1 version device
833 		 */
834 		pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
835 		if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
836 			pci_info(child, "disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'\n");
837 			return -EINVAL;
838 		}
839 	}
840 	return 0;
841 }
842 
843 static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
844 {
845 	struct pcie_link_state *link;
846 
847 	link = kzalloc(sizeof(*link), GFP_KERNEL);
848 	if (!link)
849 		return NULL;
850 
851 	INIT_LIST_HEAD(&link->sibling);
852 	link->pdev = pdev;
853 	link->downstream = pci_function_0(pdev->subordinate);
854 
855 	/*
856 	 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
857 	 * hierarchies.  Note that some PCIe host implementations omit
858 	 * the root ports entirely, in which case a downstream port on
859 	 * a switch may become the root of the link state chain for all
860 	 * its subordinate endpoints.
861 	 */
862 	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
863 	    pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE ||
864 	    !pdev->bus->parent->self) {
865 		link->root = link;
866 	} else {
867 		struct pcie_link_state *parent;
868 
869 		parent = pdev->bus->parent->self->link_state;
870 		if (!parent) {
871 			kfree(link);
872 			return NULL;
873 		}
874 
875 		link->parent = parent;
876 		link->root = link->parent->root;
877 	}
878 
879 	list_add(&link->sibling, &link_list);
880 	pdev->link_state = link;
881 	return link;
882 }
883 
884 static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev)
885 {
886 	struct pci_dev *child;
887 
888 	list_for_each_entry(child, &pdev->subordinate->devices, bus_list)
889 		sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group);
890 }
891 
892 /*
893  * pcie_aspm_init_link_state: Initiate PCI express link state.
894  * It is called after the pcie and its children devices are scanned.
895  * @pdev: the root port or switch downstream port
896  */
897 void pcie_aspm_init_link_state(struct pci_dev *pdev)
898 {
899 	struct pcie_link_state *link;
900 	int blacklist = !!pcie_aspm_sanity_check(pdev);
901 
902 	if (!aspm_support_enabled)
903 		return;
904 
905 	if (pdev->link_state)
906 		return;
907 
908 	/*
909 	 * We allocate pcie_link_state for the component on the upstream
910 	 * end of a Link, so there's nothing to do unless this device is
911 	 * downstream port.
912 	 */
913 	if (!pcie_downstream_port(pdev))
914 		return;
915 
916 	/* VIA has a strange chipset, root port is under a bridge */
917 	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
918 	    pdev->bus->self)
919 		return;
920 
921 	down_read(&pci_bus_sem);
922 	if (list_empty(&pdev->subordinate->devices))
923 		goto out;
924 
925 	mutex_lock(&aspm_lock);
926 	link = alloc_pcie_link_state(pdev);
927 	if (!link)
928 		goto unlock;
929 	/*
930 	 * Setup initial ASPM state. Note that we need to configure
931 	 * upstream links also because capable state of them can be
932 	 * update through pcie_aspm_cap_init().
933 	 */
934 	pcie_aspm_cap_init(link, blacklist);
935 
936 	/* Setup initial Clock PM state */
937 	pcie_clkpm_cap_init(link, blacklist);
938 
939 	/*
940 	 * At this stage drivers haven't had an opportunity to change the
941 	 * link policy setting. Enabling ASPM on broken hardware can cripple
942 	 * it even before the driver has had a chance to disable ASPM, so
943 	 * default to a safe level right now. If we're enabling ASPM beyond
944 	 * the BIOS's expectation, we'll do so once pci_enable_device() is
945 	 * called.
946 	 */
947 	if (aspm_policy != POLICY_POWERSAVE &&
948 	    aspm_policy != POLICY_POWER_SUPERSAVE) {
949 		pcie_config_aspm_path(link);
950 		pcie_set_clkpm(link, policy_to_clkpm_state(link));
951 	}
952 
953 	pcie_aspm_update_sysfs_visibility(pdev);
954 
955 unlock:
956 	mutex_unlock(&aspm_lock);
957 out:
958 	up_read(&pci_bus_sem);
959 }
960 
961 /* Recheck latencies and update aspm_capable for links under the root */
962 static void pcie_update_aspm_capable(struct pcie_link_state *root)
963 {
964 	struct pcie_link_state *link;
965 	BUG_ON(root->parent);
966 	list_for_each_entry(link, &link_list, sibling) {
967 		if (link->root != root)
968 			continue;
969 		link->aspm_capable = link->aspm_support;
970 	}
971 	list_for_each_entry(link, &link_list, sibling) {
972 		struct pci_dev *child;
973 		struct pci_bus *linkbus = link->pdev->subordinate;
974 		if (link->root != root)
975 			continue;
976 		list_for_each_entry(child, &linkbus->devices, bus_list) {
977 			if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) &&
978 			    (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END))
979 				continue;
980 			pcie_aspm_check_latency(child);
981 		}
982 	}
983 }
984 
985 /* @pdev: the endpoint device */
986 void pcie_aspm_exit_link_state(struct pci_dev *pdev)
987 {
988 	struct pci_dev *parent = pdev->bus->self;
989 	struct pcie_link_state *link, *root, *parent_link;
990 
991 	if (!parent || !parent->link_state)
992 		return;
993 
994 	down_read(&pci_bus_sem);
995 	mutex_lock(&aspm_lock);
996 	/*
997 	 * All PCIe functions are in one slot, remove one function will remove
998 	 * the whole slot, so just wait until we are the last function left.
999 	 */
1000 	if (!list_empty(&parent->subordinate->devices))
1001 		goto out;
1002 
1003 	link = parent->link_state;
1004 	root = link->root;
1005 	parent_link = link->parent;
1006 
1007 	/* All functions are removed, so just disable ASPM for the link */
1008 	pcie_config_aspm_link(link, 0);
1009 	list_del(&link->sibling);
1010 	/* Clock PM is for endpoint device */
1011 	free_link_state(link);
1012 
1013 	/* Recheck latencies and configure upstream links */
1014 	if (parent_link) {
1015 		pcie_update_aspm_capable(root);
1016 		pcie_config_aspm_path(parent_link);
1017 	}
1018 out:
1019 	mutex_unlock(&aspm_lock);
1020 	up_read(&pci_bus_sem);
1021 }
1022 
1023 /* @pdev: the root port or switch downstream port */
1024 void pcie_aspm_pm_state_change(struct pci_dev *pdev)
1025 {
1026 	struct pcie_link_state *link = pdev->link_state;
1027 
1028 	if (aspm_disabled || !link)
1029 		return;
1030 	/*
1031 	 * Devices changed PM state, we should recheck if latency
1032 	 * meets all functions' requirement
1033 	 */
1034 	down_read(&pci_bus_sem);
1035 	mutex_lock(&aspm_lock);
1036 	pcie_update_aspm_capable(link->root);
1037 	pcie_config_aspm_path(link);
1038 	mutex_unlock(&aspm_lock);
1039 	up_read(&pci_bus_sem);
1040 }
1041 
1042 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
1043 {
1044 	struct pcie_link_state *link = pdev->link_state;
1045 
1046 	if (aspm_disabled || !link)
1047 		return;
1048 
1049 	if (aspm_policy != POLICY_POWERSAVE &&
1050 	    aspm_policy != POLICY_POWER_SUPERSAVE)
1051 		return;
1052 
1053 	down_read(&pci_bus_sem);
1054 	mutex_lock(&aspm_lock);
1055 	pcie_config_aspm_path(link);
1056 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1057 	mutex_unlock(&aspm_lock);
1058 	up_read(&pci_bus_sem);
1059 }
1060 
1061 static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
1062 {
1063 	struct pci_dev *bridge;
1064 
1065 	if (!pci_is_pcie(pdev))
1066 		return NULL;
1067 
1068 	bridge = pci_upstream_bridge(pdev);
1069 	if (!bridge || !pci_is_pcie(bridge))
1070 		return NULL;
1071 
1072 	return bridge->link_state;
1073 }
1074 
1075 static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
1076 {
1077 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1078 
1079 	if (!link)
1080 		return -EINVAL;
1081 	/*
1082 	 * A driver requested that ASPM be disabled on this device, but
1083 	 * if we don't have permission to manage ASPM (e.g., on ACPI
1084 	 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1085 	 * the _OSC method), we can't honor that request.  Windows has
1086 	 * a similar mechanism using "PciASPMOptOut", which is also
1087 	 * ignored in this situation.
1088 	 */
1089 	if (aspm_disabled) {
1090 		pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n");
1091 		return -EPERM;
1092 	}
1093 
1094 	if (sem)
1095 		down_read(&pci_bus_sem);
1096 	mutex_lock(&aspm_lock);
1097 	if (state & PCIE_LINK_STATE_L0S)
1098 		link->aspm_disable |= ASPM_STATE_L0S;
1099 	if (state & PCIE_LINK_STATE_L1)
1100 		/* L1 PM substates require L1 */
1101 		link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
1102 	if (state & PCIE_LINK_STATE_L1_1)
1103 		link->aspm_disable |= ASPM_STATE_L1_1;
1104 	if (state & PCIE_LINK_STATE_L1_2)
1105 		link->aspm_disable |= ASPM_STATE_L1_2;
1106 	if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1107 		link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
1108 	if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1109 		link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
1110 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
1111 
1112 	if (state & PCIE_LINK_STATE_CLKPM)
1113 		link->clkpm_disable = 1;
1114 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1115 	mutex_unlock(&aspm_lock);
1116 	if (sem)
1117 		up_read(&pci_bus_sem);
1118 
1119 	return 0;
1120 }
1121 
1122 int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
1123 {
1124 	return __pci_disable_link_state(pdev, state, false);
1125 }
1126 EXPORT_SYMBOL(pci_disable_link_state_locked);
1127 
1128 /**
1129  * pci_disable_link_state - Disable device's link state, so the link will
1130  * never enter specific states.  Note that if the BIOS didn't grant ASPM
1131  * control to the OS, this does nothing because we can't touch the LNKCTL
1132  * register. Returns 0 or a negative errno.
1133  *
1134  * @pdev: PCI device
1135  * @state: ASPM link state to disable
1136  */
1137 int pci_disable_link_state(struct pci_dev *pdev, int state)
1138 {
1139 	return __pci_disable_link_state(pdev, state, true);
1140 }
1141 EXPORT_SYMBOL(pci_disable_link_state);
1142 
1143 static int pcie_aspm_set_policy(const char *val,
1144 				const struct kernel_param *kp)
1145 {
1146 	int i;
1147 	struct pcie_link_state *link;
1148 
1149 	if (aspm_disabled)
1150 		return -EPERM;
1151 	i = sysfs_match_string(policy_str, val);
1152 	if (i < 0)
1153 		return i;
1154 	if (i == aspm_policy)
1155 		return 0;
1156 
1157 	down_read(&pci_bus_sem);
1158 	mutex_lock(&aspm_lock);
1159 	aspm_policy = i;
1160 	list_for_each_entry(link, &link_list, sibling) {
1161 		pcie_config_aspm_link(link, policy_to_aspm_state(link));
1162 		pcie_set_clkpm(link, policy_to_clkpm_state(link));
1163 	}
1164 	mutex_unlock(&aspm_lock);
1165 	up_read(&pci_bus_sem);
1166 	return 0;
1167 }
1168 
1169 static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
1170 {
1171 	int i, cnt = 0;
1172 	for (i = 0; i < ARRAY_SIZE(policy_str); i++)
1173 		if (i == aspm_policy)
1174 			cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
1175 		else
1176 			cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
1177 	cnt += sprintf(buffer + cnt, "\n");
1178 	return cnt;
1179 }
1180 
1181 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
1182 	NULL, 0644);
1183 
1184 /**
1185  * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
1186  * @pdev: Target device.
1187  *
1188  * Relies on the upstream bridge's link_state being valid.  The link_state
1189  * is deallocated only when the last child of the bridge (i.e., @pdev or a
1190  * sibling) is removed, and the caller should be holding a reference to
1191  * @pdev, so this should be safe.
1192  */
1193 bool pcie_aspm_enabled(struct pci_dev *pdev)
1194 {
1195 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1196 
1197 	if (!link)
1198 		return false;
1199 
1200 	return link->aspm_enabled;
1201 }
1202 EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
1203 
1204 static ssize_t aspm_attr_show_common(struct device *dev,
1205 				     struct device_attribute *attr,
1206 				     char *buf, u8 state)
1207 {
1208 	struct pci_dev *pdev = to_pci_dev(dev);
1209 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1210 
1211 	return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0);
1212 }
1213 
1214 static ssize_t aspm_attr_store_common(struct device *dev,
1215 				      struct device_attribute *attr,
1216 				      const char *buf, size_t len, u8 state)
1217 {
1218 	struct pci_dev *pdev = to_pci_dev(dev);
1219 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1220 	bool state_enable;
1221 
1222 	if (kstrtobool(buf, &state_enable) < 0)
1223 		return -EINVAL;
1224 
1225 	down_read(&pci_bus_sem);
1226 	mutex_lock(&aspm_lock);
1227 
1228 	if (state_enable) {
1229 		link->aspm_disable &= ~state;
1230 		/* need to enable L1 for substates */
1231 		if (state & ASPM_STATE_L1SS)
1232 			link->aspm_disable &= ~ASPM_STATE_L1;
1233 	} else {
1234 		link->aspm_disable |= state;
1235 	}
1236 
1237 	pcie_config_aspm_link(link, policy_to_aspm_state(link));
1238 
1239 	mutex_unlock(&aspm_lock);
1240 	up_read(&pci_bus_sem);
1241 
1242 	return len;
1243 }
1244 
1245 #define ASPM_ATTR(_f, _s)						\
1246 static ssize_t _f##_show(struct device *dev,				\
1247 			 struct device_attribute *attr, char *buf)	\
1248 { return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); }	\
1249 									\
1250 static ssize_t _f##_store(struct device *dev,				\
1251 			  struct device_attribute *attr,		\
1252 			  const char *buf, size_t len)			\
1253 { return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
1254 
1255 ASPM_ATTR(l0s_aspm, L0S)
1256 ASPM_ATTR(l1_aspm, L1)
1257 ASPM_ATTR(l1_1_aspm, L1_1)
1258 ASPM_ATTR(l1_2_aspm, L1_2)
1259 ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
1260 ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
1261 
1262 static ssize_t clkpm_show(struct device *dev,
1263 			  struct device_attribute *attr, char *buf)
1264 {
1265 	struct pci_dev *pdev = to_pci_dev(dev);
1266 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1267 
1268 	return sysfs_emit(buf, "%d\n", link->clkpm_enabled);
1269 }
1270 
1271 static ssize_t clkpm_store(struct device *dev,
1272 			   struct device_attribute *attr,
1273 			   const char *buf, size_t len)
1274 {
1275 	struct pci_dev *pdev = to_pci_dev(dev);
1276 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1277 	bool state_enable;
1278 
1279 	if (kstrtobool(buf, &state_enable) < 0)
1280 		return -EINVAL;
1281 
1282 	down_read(&pci_bus_sem);
1283 	mutex_lock(&aspm_lock);
1284 
1285 	link->clkpm_disable = !state_enable;
1286 	pcie_set_clkpm(link, policy_to_clkpm_state(link));
1287 
1288 	mutex_unlock(&aspm_lock);
1289 	up_read(&pci_bus_sem);
1290 
1291 	return len;
1292 }
1293 
1294 static DEVICE_ATTR_RW(clkpm);
1295 static DEVICE_ATTR_RW(l0s_aspm);
1296 static DEVICE_ATTR_RW(l1_aspm);
1297 static DEVICE_ATTR_RW(l1_1_aspm);
1298 static DEVICE_ATTR_RW(l1_2_aspm);
1299 static DEVICE_ATTR_RW(l1_1_pcipm);
1300 static DEVICE_ATTR_RW(l1_2_pcipm);
1301 
1302 static struct attribute *aspm_ctrl_attrs[] = {
1303 	&dev_attr_clkpm.attr,
1304 	&dev_attr_l0s_aspm.attr,
1305 	&dev_attr_l1_aspm.attr,
1306 	&dev_attr_l1_1_aspm.attr,
1307 	&dev_attr_l1_2_aspm.attr,
1308 	&dev_attr_l1_1_pcipm.attr,
1309 	&dev_attr_l1_2_pcipm.attr,
1310 	NULL
1311 };
1312 
1313 static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
1314 					   struct attribute *a, int n)
1315 {
1316 	struct device *dev = kobj_to_dev(kobj);
1317 	struct pci_dev *pdev = to_pci_dev(dev);
1318 	struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1319 	static const u8 aspm_state_map[] = {
1320 		ASPM_STATE_L0S,
1321 		ASPM_STATE_L1,
1322 		ASPM_STATE_L1_1,
1323 		ASPM_STATE_L1_2,
1324 		ASPM_STATE_L1_1_PCIPM,
1325 		ASPM_STATE_L1_2_PCIPM,
1326 	};
1327 
1328 	if (aspm_disabled || !link)
1329 		return 0;
1330 
1331 	if (n == 0)
1332 		return link->clkpm_capable ? a->mode : 0;
1333 
1334 	return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0;
1335 }
1336 
1337 const struct attribute_group aspm_ctrl_attr_group = {
1338 	.name = "link",
1339 	.attrs = aspm_ctrl_attrs,
1340 	.is_visible = aspm_ctrl_attrs_are_visible,
1341 };
1342 
1343 static int __init pcie_aspm_disable(char *str)
1344 {
1345 	if (!strcmp(str, "off")) {
1346 		aspm_policy = POLICY_DEFAULT;
1347 		aspm_disabled = 1;
1348 		aspm_support_enabled = false;
1349 		printk(KERN_INFO "PCIe ASPM is disabled\n");
1350 	} else if (!strcmp(str, "force")) {
1351 		aspm_force = 1;
1352 		printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
1353 	}
1354 	return 1;
1355 }
1356 
1357 __setup("pcie_aspm=", pcie_aspm_disable);
1358 
1359 void pcie_no_aspm(void)
1360 {
1361 	/*
1362 	 * Disabling ASPM is intended to prevent the kernel from modifying
1363 	 * existing hardware state, not to clear existing state. To that end:
1364 	 * (a) set policy to POLICY_DEFAULT in order to avoid changing state
1365 	 * (b) prevent userspace from changing policy
1366 	 */
1367 	if (!aspm_force) {
1368 		aspm_policy = POLICY_DEFAULT;
1369 		aspm_disabled = 1;
1370 	}
1371 }
1372 
1373 bool pcie_aspm_support_enabled(void)
1374 {
1375 	return aspm_support_enabled;
1376 }
1377 EXPORT_SYMBOL(pcie_aspm_support_enabled);
1378