1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Enable PCIe link L0s/L1 state and Clock Power Management 4 * 5 * Copyright (C) 2007 Intel 6 * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) 7 * Copyright (C) Shaohua Li (shaohua.li@intel.com) 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/math.h> 12 #include <linux/module.h> 13 #include <linux/moduleparam.h> 14 #include <linux/pci.h> 15 #include <linux/pci_regs.h> 16 #include <linux/errno.h> 17 #include <linux/pm.h> 18 #include <linux/init.h> 19 #include <linux/slab.h> 20 #include <linux/jiffies.h> 21 #include <linux/delay.h> 22 #include "../pci.h" 23 24 #ifdef MODULE_PARAM_PREFIX 25 #undef MODULE_PARAM_PREFIX 26 #endif 27 #define MODULE_PARAM_PREFIX "pcie_aspm." 28 29 /* Note: those are not register definitions */ 30 #define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */ 31 #define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */ 32 #define ASPM_STATE_L1 (4) /* L1 state */ 33 #define ASPM_STATE_L1_1 (8) /* ASPM L1.1 state */ 34 #define ASPM_STATE_L1_2 (0x10) /* ASPM L1.2 state */ 35 #define ASPM_STATE_L1_1_PCIPM (0x20) /* PCI PM L1.1 state */ 36 #define ASPM_STATE_L1_2_PCIPM (0x40) /* PCI PM L1.2 state */ 37 #define ASPM_STATE_L1_SS_PCIPM (ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM) 38 #define ASPM_STATE_L1_2_MASK (ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM) 39 #define ASPM_STATE_L1SS (ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\ 40 ASPM_STATE_L1_2_MASK) 41 #define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW) 42 #define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1 | \ 43 ASPM_STATE_L1SS) 44 45 struct pcie_link_state { 46 struct pci_dev *pdev; /* Upstream component of the Link */ 47 struct pci_dev *downstream; /* Downstream component, function 0 */ 48 struct pcie_link_state *root; /* pointer to the root port link */ 49 struct pcie_link_state *parent; /* pointer to the parent Link state */ 50 struct list_head sibling; /* node in link_list */ 51 52 /* ASPM state */ 53 u32 aspm_support:7; /* Supported ASPM state */ 54 u32 aspm_enabled:7; /* Enabled ASPM state */ 55 u32 aspm_capable:7; /* Capable ASPM state with latency */ 56 u32 aspm_default:7; /* Default ASPM state by BIOS */ 57 u32 aspm_disable:7; /* Disabled ASPM state */ 58 59 /* Clock PM state */ 60 u32 clkpm_capable:1; /* Clock PM capable? */ 61 u32 clkpm_enabled:1; /* Current Clock PM state */ 62 u32 clkpm_default:1; /* Default Clock PM state by BIOS */ 63 u32 clkpm_disable:1; /* Clock PM disabled */ 64 }; 65 66 static int aspm_disabled, aspm_force; 67 static bool aspm_support_enabled = true; 68 static DEFINE_MUTEX(aspm_lock); 69 static LIST_HEAD(link_list); 70 71 #define POLICY_DEFAULT 0 /* BIOS default setting */ 72 #define POLICY_PERFORMANCE 1 /* high performance */ 73 #define POLICY_POWERSAVE 2 /* high power saving */ 74 #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */ 75 76 #ifdef CONFIG_PCIEASPM_PERFORMANCE 77 static int aspm_policy = POLICY_PERFORMANCE; 78 #elif defined CONFIG_PCIEASPM_POWERSAVE 79 static int aspm_policy = POLICY_POWERSAVE; 80 #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE 81 static int aspm_policy = POLICY_POWER_SUPERSAVE; 82 #else 83 static int aspm_policy; 84 #endif 85 86 static const char *policy_str[] = { 87 [POLICY_DEFAULT] = "default", 88 [POLICY_PERFORMANCE] = "performance", 89 [POLICY_POWERSAVE] = "powersave", 90 [POLICY_POWER_SUPERSAVE] = "powersupersave" 91 }; 92 93 #define LINK_RETRAIN_TIMEOUT HZ 94 95 /* 96 * The L1 PM substate capability is only implemented in function 0 in a 97 * multi function device. 98 */ 99 static struct pci_dev *pci_function_0(struct pci_bus *linkbus) 100 { 101 struct pci_dev *child; 102 103 list_for_each_entry(child, &linkbus->devices, bus_list) 104 if (PCI_FUNC(child->devfn) == 0) 105 return child; 106 return NULL; 107 } 108 109 static int policy_to_aspm_state(struct pcie_link_state *link) 110 { 111 switch (aspm_policy) { 112 case POLICY_PERFORMANCE: 113 /* Disable ASPM and Clock PM */ 114 return 0; 115 case POLICY_POWERSAVE: 116 /* Enable ASPM L0s/L1 */ 117 return (ASPM_STATE_L0S | ASPM_STATE_L1); 118 case POLICY_POWER_SUPERSAVE: 119 /* Enable Everything */ 120 return ASPM_STATE_ALL; 121 case POLICY_DEFAULT: 122 return link->aspm_default; 123 } 124 return 0; 125 } 126 127 static int policy_to_clkpm_state(struct pcie_link_state *link) 128 { 129 switch (aspm_policy) { 130 case POLICY_PERFORMANCE: 131 /* Disable ASPM and Clock PM */ 132 return 0; 133 case POLICY_POWERSAVE: 134 case POLICY_POWER_SUPERSAVE: 135 /* Enable Clock PM */ 136 return 1; 137 case POLICY_DEFAULT: 138 return link->clkpm_default; 139 } 140 return 0; 141 } 142 143 static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable) 144 { 145 struct pci_dev *child; 146 struct pci_bus *linkbus = link->pdev->subordinate; 147 u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0; 148 149 list_for_each_entry(child, &linkbus->devices, bus_list) 150 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, 151 PCI_EXP_LNKCTL_CLKREQ_EN, 152 val); 153 link->clkpm_enabled = !!enable; 154 } 155 156 static void pcie_set_clkpm(struct pcie_link_state *link, int enable) 157 { 158 /* 159 * Don't enable Clock PM if the link is not Clock PM capable 160 * or Clock PM is disabled 161 */ 162 if (!link->clkpm_capable || link->clkpm_disable) 163 enable = 0; 164 /* Need nothing if the specified equals to current state */ 165 if (link->clkpm_enabled == enable) 166 return; 167 pcie_set_clkpm_nocheck(link, enable); 168 } 169 170 static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist) 171 { 172 int capable = 1, enabled = 1; 173 u32 reg32; 174 u16 reg16; 175 struct pci_dev *child; 176 struct pci_bus *linkbus = link->pdev->subordinate; 177 178 /* All functions should have the same cap and state, take the worst */ 179 list_for_each_entry(child, &linkbus->devices, bus_list) { 180 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, ®32); 181 if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) { 182 capable = 0; 183 enabled = 0; 184 break; 185 } 186 pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); 187 if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN)) 188 enabled = 0; 189 } 190 link->clkpm_enabled = enabled; 191 link->clkpm_default = enabled; 192 link->clkpm_capable = capable; 193 link->clkpm_disable = blacklist ? 1 : 0; 194 } 195 196 static bool pcie_retrain_link(struct pcie_link_state *link) 197 { 198 struct pci_dev *parent = link->pdev; 199 unsigned long end_jiffies; 200 u16 reg16; 201 202 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); 203 reg16 |= PCI_EXP_LNKCTL_RL; 204 pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); 205 if (parent->clear_retrain_link) { 206 /* 207 * Due to an erratum in some devices the Retrain Link bit 208 * needs to be cleared again manually to allow the link 209 * training to succeed. 210 */ 211 reg16 &= ~PCI_EXP_LNKCTL_RL; 212 pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); 213 } 214 215 /* Wait for link training end. Break out after waiting for timeout */ 216 end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT; 217 do { 218 pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); 219 if (!(reg16 & PCI_EXP_LNKSTA_LT)) 220 break; 221 msleep(1); 222 } while (time_before(jiffies, end_jiffies)); 223 return !(reg16 & PCI_EXP_LNKSTA_LT); 224 } 225 226 /* 227 * pcie_aspm_configure_common_clock: check if the 2 ends of a link 228 * could use common clock. If they are, configure them to use the 229 * common clock. That will reduce the ASPM state exit latency. 230 */ 231 static void pcie_aspm_configure_common_clock(struct pcie_link_state *link) 232 { 233 int same_clock = 1; 234 u16 reg16, parent_reg, child_reg[8]; 235 struct pci_dev *child, *parent = link->pdev; 236 struct pci_bus *linkbus = parent->subordinate; 237 /* 238 * All functions of a slot should have the same Slot Clock 239 * Configuration, so just check one function 240 */ 241 child = list_entry(linkbus->devices.next, struct pci_dev, bus_list); 242 BUG_ON(!pci_is_pcie(child)); 243 244 /* Check downstream component if bit Slot Clock Configuration is 1 */ 245 pcie_capability_read_word(child, PCI_EXP_LNKSTA, ®16); 246 if (!(reg16 & PCI_EXP_LNKSTA_SLC)) 247 same_clock = 0; 248 249 /* Check upstream component if bit Slot Clock Configuration is 1 */ 250 pcie_capability_read_word(parent, PCI_EXP_LNKSTA, ®16); 251 if (!(reg16 & PCI_EXP_LNKSTA_SLC)) 252 same_clock = 0; 253 254 /* Port might be already in common clock mode */ 255 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); 256 if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) { 257 bool consistent = true; 258 259 list_for_each_entry(child, &linkbus->devices, bus_list) { 260 pcie_capability_read_word(child, PCI_EXP_LNKCTL, 261 ®16); 262 if (!(reg16 & PCI_EXP_LNKCTL_CCC)) { 263 consistent = false; 264 break; 265 } 266 } 267 if (consistent) 268 return; 269 pci_info(parent, "ASPM: current common clock configuration is inconsistent, reconfiguring\n"); 270 } 271 272 /* Configure downstream component, all functions */ 273 list_for_each_entry(child, &linkbus->devices, bus_list) { 274 pcie_capability_read_word(child, PCI_EXP_LNKCTL, ®16); 275 child_reg[PCI_FUNC(child->devfn)] = reg16; 276 if (same_clock) 277 reg16 |= PCI_EXP_LNKCTL_CCC; 278 else 279 reg16 &= ~PCI_EXP_LNKCTL_CCC; 280 pcie_capability_write_word(child, PCI_EXP_LNKCTL, reg16); 281 } 282 283 /* Configure upstream component */ 284 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, ®16); 285 parent_reg = reg16; 286 if (same_clock) 287 reg16 |= PCI_EXP_LNKCTL_CCC; 288 else 289 reg16 &= ~PCI_EXP_LNKCTL_CCC; 290 pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16); 291 292 if (pcie_retrain_link(link)) 293 return; 294 295 /* Training failed. Restore common clock configurations */ 296 pci_err(parent, "ASPM: Could not configure common clock\n"); 297 list_for_each_entry(child, &linkbus->devices, bus_list) 298 pcie_capability_write_word(child, PCI_EXP_LNKCTL, 299 child_reg[PCI_FUNC(child->devfn)]); 300 pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg); 301 } 302 303 /* Convert L0s latency encoding to ns */ 304 static u32 calc_l0s_latency(u32 lnkcap) 305 { 306 u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L0SEL) >> 12; 307 308 if (encoding == 0x7) 309 return (5 * 1000); /* > 4us */ 310 return (64 << encoding); 311 } 312 313 /* Convert L0s acceptable latency encoding to ns */ 314 static u32 calc_l0s_acceptable(u32 encoding) 315 { 316 if (encoding == 0x7) 317 return -1U; 318 return (64 << encoding); 319 } 320 321 /* Convert L1 latency encoding to ns */ 322 static u32 calc_l1_latency(u32 lnkcap) 323 { 324 u32 encoding = (lnkcap & PCI_EXP_LNKCAP_L1EL) >> 15; 325 326 if (encoding == 0x7) 327 return (65 * 1000); /* > 64us */ 328 return (1000 << encoding); 329 } 330 331 /* Convert L1 acceptable latency encoding to ns */ 332 static u32 calc_l1_acceptable(u32 encoding) 333 { 334 if (encoding == 0x7) 335 return -1U; 336 return (1000 << encoding); 337 } 338 339 /* Convert L1SS T_pwr encoding to usec */ 340 static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val) 341 { 342 switch (scale) { 343 case 0: 344 return val * 2; 345 case 1: 346 return val * 10; 347 case 2: 348 return val * 100; 349 } 350 pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale); 351 return 0; 352 } 353 354 /* 355 * Encode an LTR_L1.2_THRESHOLD value for the L1 PM Substates Control 1 356 * register. Ports enter L1.2 when the most recent LTR value is greater 357 * than or equal to LTR_L1.2_THRESHOLD, so we round up to make sure we 358 * don't enter L1.2 too aggressively. 359 * 360 * See PCIe r6.0, sec 5.5.1, 6.18, 7.8.3.3. 361 */ 362 static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value) 363 { 364 u64 threshold_ns = (u64) threshold_us * 1000; 365 366 /* 367 * LTR_L1.2_THRESHOLD_Value ("value") is a 10-bit field with max 368 * value of 0x3ff. 369 */ 370 if (threshold_ns <= 0x3ff * 1) { 371 *scale = 0; /* Value times 1ns */ 372 *value = threshold_ns; 373 } else if (threshold_ns <= 0x3ff * 32) { 374 *scale = 1; /* Value times 32ns */ 375 *value = roundup(threshold_ns, 32) / 32; 376 } else if (threshold_ns <= 0x3ff * 1024) { 377 *scale = 2; /* Value times 1024ns */ 378 *value = roundup(threshold_ns, 1024) / 1024; 379 } else if (threshold_ns <= 0x3ff * 32768) { 380 *scale = 3; /* Value times 32768ns */ 381 *value = roundup(threshold_ns, 32768) / 32768; 382 } else if (threshold_ns <= 0x3ff * 1048576) { 383 *scale = 4; /* Value times 1048576ns */ 384 *value = roundup(threshold_ns, 1048576) / 1048576; 385 } else if (threshold_ns <= 0x3ff * (u64) 33554432) { 386 *scale = 5; /* Value times 33554432ns */ 387 *value = roundup(threshold_ns, 33554432) / 33554432; 388 } else { 389 *scale = 5; 390 *value = 0x3ff; /* Max representable value */ 391 } 392 } 393 394 static void pcie_aspm_check_latency(struct pci_dev *endpoint) 395 { 396 u32 latency, encoding, lnkcap_up, lnkcap_dw; 397 u32 l1_switch_latency = 0, latency_up_l0s; 398 u32 latency_up_l1, latency_dw_l0s, latency_dw_l1; 399 u32 acceptable_l0s, acceptable_l1; 400 struct pcie_link_state *link; 401 402 /* Device not in D0 doesn't need latency check */ 403 if ((endpoint->current_state != PCI_D0) && 404 (endpoint->current_state != PCI_UNKNOWN)) 405 return; 406 407 link = endpoint->bus->self->link_state; 408 409 /* Calculate endpoint L0s acceptable latency */ 410 encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L0S) >> 6; 411 acceptable_l0s = calc_l0s_acceptable(encoding); 412 413 /* Calculate endpoint L1 acceptable latency */ 414 encoding = (endpoint->devcap & PCI_EXP_DEVCAP_L1) >> 9; 415 acceptable_l1 = calc_l1_acceptable(encoding); 416 417 while (link) { 418 struct pci_dev *dev = pci_function_0(link->pdev->subordinate); 419 420 /* Read direction exit latencies */ 421 pcie_capability_read_dword(link->pdev, PCI_EXP_LNKCAP, 422 &lnkcap_up); 423 pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, 424 &lnkcap_dw); 425 latency_up_l0s = calc_l0s_latency(lnkcap_up); 426 latency_up_l1 = calc_l1_latency(lnkcap_up); 427 latency_dw_l0s = calc_l0s_latency(lnkcap_dw); 428 latency_dw_l1 = calc_l1_latency(lnkcap_dw); 429 430 /* Check upstream direction L0s latency */ 431 if ((link->aspm_capable & ASPM_STATE_L0S_UP) && 432 (latency_up_l0s > acceptable_l0s)) 433 link->aspm_capable &= ~ASPM_STATE_L0S_UP; 434 435 /* Check downstream direction L0s latency */ 436 if ((link->aspm_capable & ASPM_STATE_L0S_DW) && 437 (latency_dw_l0s > acceptable_l0s)) 438 link->aspm_capable &= ~ASPM_STATE_L0S_DW; 439 /* 440 * Check L1 latency. 441 * Every switch on the path to root complex need 1 442 * more microsecond for L1. Spec doesn't mention L0s. 443 * 444 * The exit latencies for L1 substates are not advertised 445 * by a device. Since the spec also doesn't mention a way 446 * to determine max latencies introduced by enabling L1 447 * substates on the components, it is not clear how to do 448 * a L1 substate exit latency check. We assume that the 449 * L1 exit latencies advertised by a device include L1 450 * substate latencies (and hence do not do any check). 451 */ 452 latency = max_t(u32, latency_up_l1, latency_dw_l1); 453 if ((link->aspm_capable & ASPM_STATE_L1) && 454 (latency + l1_switch_latency > acceptable_l1)) 455 link->aspm_capable &= ~ASPM_STATE_L1; 456 l1_switch_latency += 1000; 457 458 link = link->parent; 459 } 460 } 461 462 static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos, 463 u32 clear, u32 set) 464 { 465 u32 val; 466 467 pci_read_config_dword(pdev, pos, &val); 468 val &= ~clear; 469 val |= set; 470 pci_write_config_dword(pdev, pos, val); 471 } 472 473 /* Calculate L1.2 PM substate timing parameters */ 474 static void aspm_calc_l1ss_info(struct pcie_link_state *link, 475 u32 parent_l1ss_cap, u32 child_l1ss_cap) 476 { 477 struct pci_dev *child = link->downstream, *parent = link->pdev; 478 u32 val1, val2, scale1, scale2; 479 u32 t_common_mode, t_power_on, l1_2_threshold, scale, value; 480 u32 ctl1 = 0, ctl2 = 0; 481 u32 pctl1, pctl2, cctl1, cctl2; 482 u32 pl1_2_enables, cl1_2_enables; 483 484 if (!(link->aspm_support & ASPM_STATE_L1_2_MASK)) 485 return; 486 487 /* Choose the greater of the two Port Common_Mode_Restore_Times */ 488 val1 = (parent_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; 489 val2 = (child_l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8; 490 t_common_mode = max(val1, val2); 491 492 /* Choose the greater of the two Port T_POWER_ON times */ 493 val1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; 494 scale1 = (parent_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; 495 val2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19; 496 scale2 = (child_l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16; 497 498 if (calc_l1ss_pwron(parent, scale1, val1) > 499 calc_l1ss_pwron(child, scale2, val2)) { 500 ctl2 |= scale1 | (val1 << 3); 501 t_power_on = calc_l1ss_pwron(parent, scale1, val1); 502 } else { 503 ctl2 |= scale2 | (val2 << 3); 504 t_power_on = calc_l1ss_pwron(child, scale2, val2); 505 } 506 507 /* 508 * Set LTR_L1.2_THRESHOLD to the time required to transition the 509 * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if 510 * downstream devices report (via LTR) that they can tolerate at 511 * least that much latency. 512 * 513 * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and 514 * Table 5-11. T(POWER_OFF) is at most 2us and T(L1.2) is at 515 * least 4us. 516 */ 517 l1_2_threshold = 2 + 4 + t_common_mode + t_power_on; 518 encode_l12_threshold(l1_2_threshold, &scale, &value); 519 ctl1 |= t_common_mode << 8 | scale << 29 | value << 16; 520 521 /* Some broken devices only support dword access to L1 SS */ 522 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, &pctl1); 523 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, &pctl2); 524 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, &cctl1); 525 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL2, &cctl2); 526 527 if (ctl1 == pctl1 && ctl1 == cctl1 && 528 ctl2 == pctl2 && ctl2 == cctl2) 529 return; 530 531 /* Disable L1.2 while updating. See PCIe r5.0, sec 5.5.4, 7.8.3.3 */ 532 pl1_2_enables = pctl1 & PCI_L1SS_CTL1_L1_2_MASK; 533 cl1_2_enables = cctl1 & PCI_L1SS_CTL1_L1_2_MASK; 534 535 if (pl1_2_enables || cl1_2_enables) { 536 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 537 PCI_L1SS_CTL1_L1_2_MASK, 0); 538 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 539 PCI_L1SS_CTL1_L1_2_MASK, 0); 540 } 541 542 /* Program T_POWER_ON times in both ports */ 543 pci_write_config_dword(parent, parent->l1ss + PCI_L1SS_CTL2, ctl2); 544 pci_write_config_dword(child, child->l1ss + PCI_L1SS_CTL2, ctl2); 545 546 /* Program Common_Mode_Restore_Time in upstream device */ 547 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 548 PCI_L1SS_CTL1_CM_RESTORE_TIME, ctl1); 549 550 /* Program LTR_L1.2_THRESHOLD time in both ports */ 551 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 552 PCI_L1SS_CTL1_LTR_L12_TH_VALUE | 553 PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1); 554 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 555 PCI_L1SS_CTL1_LTR_L12_TH_VALUE | 556 PCI_L1SS_CTL1_LTR_L12_TH_SCALE, ctl1); 557 558 if (pl1_2_enables || cl1_2_enables) { 559 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 0, 560 pl1_2_enables); 561 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 0, 562 cl1_2_enables); 563 } 564 } 565 566 static void aspm_l1ss_init(struct pcie_link_state *link) 567 { 568 struct pci_dev *child = link->downstream, *parent = link->pdev; 569 u32 parent_l1ss_cap, child_l1ss_cap; 570 u32 parent_l1ss_ctl1 = 0, child_l1ss_ctl1 = 0; 571 572 if (!parent->l1ss || !child->l1ss) 573 return; 574 575 /* Setup L1 substate */ 576 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CAP, 577 &parent_l1ss_cap); 578 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CAP, 579 &child_l1ss_cap); 580 581 if (!(parent_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) 582 parent_l1ss_cap = 0; 583 if (!(child_l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) 584 child_l1ss_cap = 0; 585 586 /* 587 * If we don't have LTR for the entire path from the Root Complex 588 * to this device, we can't use ASPM L1.2 because it relies on the 589 * LTR_L1.2_THRESHOLD. See PCIe r4.0, secs 5.5.4, 6.18. 590 */ 591 if (!child->ltr_path) 592 child_l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2; 593 594 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1) 595 link->aspm_support |= ASPM_STATE_L1_1; 596 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2) 597 link->aspm_support |= ASPM_STATE_L1_2; 598 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1) 599 link->aspm_support |= ASPM_STATE_L1_1_PCIPM; 600 if (parent_l1ss_cap & child_l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2) 601 link->aspm_support |= ASPM_STATE_L1_2_PCIPM; 602 603 if (parent_l1ss_cap) 604 pci_read_config_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 605 &parent_l1ss_ctl1); 606 if (child_l1ss_cap) 607 pci_read_config_dword(child, child->l1ss + PCI_L1SS_CTL1, 608 &child_l1ss_ctl1); 609 610 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1) 611 link->aspm_enabled |= ASPM_STATE_L1_1; 612 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2) 613 link->aspm_enabled |= ASPM_STATE_L1_2; 614 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1) 615 link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM; 616 if (parent_l1ss_ctl1 & child_l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2) 617 link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM; 618 619 if (link->aspm_support & ASPM_STATE_L1SS) 620 aspm_calc_l1ss_info(link, parent_l1ss_cap, child_l1ss_cap); 621 } 622 623 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist) 624 { 625 struct pci_dev *child = link->downstream, *parent = link->pdev; 626 u32 parent_lnkcap, child_lnkcap; 627 u16 parent_lnkctl, child_lnkctl; 628 struct pci_bus *linkbus = parent->subordinate; 629 630 if (blacklist) { 631 /* Set enabled/disable so that we will disable ASPM later */ 632 link->aspm_enabled = ASPM_STATE_ALL; 633 link->aspm_disable = ASPM_STATE_ALL; 634 return; 635 } 636 637 /* 638 * If ASPM not supported, don't mess with the clocks and link, 639 * bail out now. 640 */ 641 pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap); 642 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap); 643 if (!(parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPMS)) 644 return; 645 646 /* Configure common clock before checking latencies */ 647 pcie_aspm_configure_common_clock(link); 648 649 /* 650 * Re-read upstream/downstream components' register state after 651 * clock configuration. L0s & L1 exit latencies in the otherwise 652 * read-only Link Capabilities may change depending on common clock 653 * configuration (PCIe r5.0, sec 7.5.3.6). 654 */ 655 pcie_capability_read_dword(parent, PCI_EXP_LNKCAP, &parent_lnkcap); 656 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &child_lnkcap); 657 pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &parent_lnkctl); 658 pcie_capability_read_word(child, PCI_EXP_LNKCTL, &child_lnkctl); 659 660 /* 661 * Setup L0s state 662 * 663 * Note that we must not enable L0s in either direction on a 664 * given link unless components on both sides of the link each 665 * support L0s. 666 */ 667 if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L0S) 668 link->aspm_support |= ASPM_STATE_L0S; 669 670 if (child_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) 671 link->aspm_enabled |= ASPM_STATE_L0S_UP; 672 if (parent_lnkctl & PCI_EXP_LNKCTL_ASPM_L0S) 673 link->aspm_enabled |= ASPM_STATE_L0S_DW; 674 675 /* Setup L1 state */ 676 if (parent_lnkcap & child_lnkcap & PCI_EXP_LNKCAP_ASPM_L1) 677 link->aspm_support |= ASPM_STATE_L1; 678 679 if (parent_lnkctl & child_lnkctl & PCI_EXP_LNKCTL_ASPM_L1) 680 link->aspm_enabled |= ASPM_STATE_L1; 681 682 aspm_l1ss_init(link); 683 684 /* Save default state */ 685 link->aspm_default = link->aspm_enabled; 686 687 /* Setup initial capable state. Will be updated later */ 688 link->aspm_capable = link->aspm_support; 689 690 /* Get and check endpoint acceptable latencies */ 691 list_for_each_entry(child, &linkbus->devices, bus_list) { 692 if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT && 693 pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END) 694 continue; 695 696 pcie_aspm_check_latency(child); 697 } 698 } 699 700 /* Configure the ASPM L1 substates */ 701 static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state) 702 { 703 u32 val, enable_req; 704 struct pci_dev *child = link->downstream, *parent = link->pdev; 705 706 enable_req = (link->aspm_enabled ^ state) & state; 707 708 /* 709 * Here are the rules specified in the PCIe spec for enabling L1SS: 710 * - When enabling L1.x, enable bit at parent first, then at child 711 * - When disabling L1.x, disable bit at child first, then at parent 712 * - When enabling ASPM L1.x, need to disable L1 713 * (at child followed by parent). 714 * - The ASPM/PCIPM L1.2 must be disabled while programming timing 715 * parameters 716 * 717 * To keep it simple, disable all L1SS bits first, and later enable 718 * what is needed. 719 */ 720 721 /* Disable all L1 substates */ 722 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 723 PCI_L1SS_CTL1_L1SS_MASK, 0); 724 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 725 PCI_L1SS_CTL1_L1SS_MASK, 0); 726 /* 727 * If needed, disable L1, and it gets enabled later 728 * in pcie_config_aspm_link(). 729 */ 730 if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) { 731 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL, 732 PCI_EXP_LNKCTL_ASPM_L1, 0); 733 pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL, 734 PCI_EXP_LNKCTL_ASPM_L1, 0); 735 } 736 737 val = 0; 738 if (state & ASPM_STATE_L1_1) 739 val |= PCI_L1SS_CTL1_ASPM_L1_1; 740 if (state & ASPM_STATE_L1_2) 741 val |= PCI_L1SS_CTL1_ASPM_L1_2; 742 if (state & ASPM_STATE_L1_1_PCIPM) 743 val |= PCI_L1SS_CTL1_PCIPM_L1_1; 744 if (state & ASPM_STATE_L1_2_PCIPM) 745 val |= PCI_L1SS_CTL1_PCIPM_L1_2; 746 747 /* Enable what we need to enable */ 748 pci_clear_and_set_dword(parent, parent->l1ss + PCI_L1SS_CTL1, 749 PCI_L1SS_CTL1_L1SS_MASK, val); 750 pci_clear_and_set_dword(child, child->l1ss + PCI_L1SS_CTL1, 751 PCI_L1SS_CTL1_L1SS_MASK, val); 752 } 753 754 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val) 755 { 756 pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL, 757 PCI_EXP_LNKCTL_ASPMC, val); 758 } 759 760 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state) 761 { 762 u32 upstream = 0, dwstream = 0; 763 struct pci_dev *child = link->downstream, *parent = link->pdev; 764 struct pci_bus *linkbus = parent->subordinate; 765 766 /* Enable only the states that were not explicitly disabled */ 767 state &= (link->aspm_capable & ~link->aspm_disable); 768 769 /* Can't enable any substates if L1 is not enabled */ 770 if (!(state & ASPM_STATE_L1)) 771 state &= ~ASPM_STATE_L1SS; 772 773 /* Spec says both ports must be in D0 before enabling PCI PM substates*/ 774 if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) { 775 state &= ~ASPM_STATE_L1_SS_PCIPM; 776 state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM); 777 } 778 779 /* Nothing to do if the link is already in the requested state */ 780 if (link->aspm_enabled == state) 781 return; 782 /* Convert ASPM state to upstream/downstream ASPM register state */ 783 if (state & ASPM_STATE_L0S_UP) 784 dwstream |= PCI_EXP_LNKCTL_ASPM_L0S; 785 if (state & ASPM_STATE_L0S_DW) 786 upstream |= PCI_EXP_LNKCTL_ASPM_L0S; 787 if (state & ASPM_STATE_L1) { 788 upstream |= PCI_EXP_LNKCTL_ASPM_L1; 789 dwstream |= PCI_EXP_LNKCTL_ASPM_L1; 790 } 791 792 if (link->aspm_capable & ASPM_STATE_L1SS) 793 pcie_config_aspm_l1ss(link, state); 794 795 /* 796 * Spec 2.0 suggests all functions should be configured the 797 * same setting for ASPM. Enabling ASPM L1 should be done in 798 * upstream component first and then downstream, and vice 799 * versa for disabling ASPM L1. Spec doesn't mention L0S. 800 */ 801 if (state & ASPM_STATE_L1) 802 pcie_config_aspm_dev(parent, upstream); 803 list_for_each_entry(child, &linkbus->devices, bus_list) 804 pcie_config_aspm_dev(child, dwstream); 805 if (!(state & ASPM_STATE_L1)) 806 pcie_config_aspm_dev(parent, upstream); 807 808 link->aspm_enabled = state; 809 } 810 811 static void pcie_config_aspm_path(struct pcie_link_state *link) 812 { 813 while (link) { 814 pcie_config_aspm_link(link, policy_to_aspm_state(link)); 815 link = link->parent; 816 } 817 } 818 819 static void free_link_state(struct pcie_link_state *link) 820 { 821 link->pdev->link_state = NULL; 822 kfree(link); 823 } 824 825 static int pcie_aspm_sanity_check(struct pci_dev *pdev) 826 { 827 struct pci_dev *child; 828 u32 reg32; 829 830 /* 831 * Some functions in a slot might not all be PCIe functions, 832 * very strange. Disable ASPM for the whole slot 833 */ 834 list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { 835 if (!pci_is_pcie(child)) 836 return -EINVAL; 837 838 /* 839 * If ASPM is disabled then we're not going to change 840 * the BIOS state. It's safe to continue even if it's a 841 * pre-1.1 device 842 */ 843 844 if (aspm_disabled) 845 continue; 846 847 /* 848 * Disable ASPM for pre-1.1 PCIe device, we follow MS to use 849 * RBER bit to determine if a function is 1.1 version device 850 */ 851 pcie_capability_read_dword(child, PCI_EXP_DEVCAP, ®32); 852 if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) { 853 pci_info(child, "disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'\n"); 854 return -EINVAL; 855 } 856 } 857 return 0; 858 } 859 860 static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev) 861 { 862 struct pcie_link_state *link; 863 864 link = kzalloc(sizeof(*link), GFP_KERNEL); 865 if (!link) 866 return NULL; 867 868 INIT_LIST_HEAD(&link->sibling); 869 link->pdev = pdev; 870 link->downstream = pci_function_0(pdev->subordinate); 871 872 /* 873 * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe 874 * hierarchies. Note that some PCIe host implementations omit 875 * the root ports entirely, in which case a downstream port on 876 * a switch may become the root of the link state chain for all 877 * its subordinate endpoints. 878 */ 879 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT || 880 pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE || 881 !pdev->bus->parent->self) { 882 link->root = link; 883 } else { 884 struct pcie_link_state *parent; 885 886 parent = pdev->bus->parent->self->link_state; 887 if (!parent) { 888 kfree(link); 889 return NULL; 890 } 891 892 link->parent = parent; 893 link->root = link->parent->root; 894 } 895 896 list_add(&link->sibling, &link_list); 897 pdev->link_state = link; 898 return link; 899 } 900 901 static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev) 902 { 903 struct pci_dev *child; 904 905 list_for_each_entry(child, &pdev->subordinate->devices, bus_list) 906 sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group); 907 } 908 909 /* 910 * pcie_aspm_init_link_state: Initiate PCI express link state. 911 * It is called after the pcie and its children devices are scanned. 912 * @pdev: the root port or switch downstream port 913 */ 914 void pcie_aspm_init_link_state(struct pci_dev *pdev) 915 { 916 struct pcie_link_state *link; 917 int blacklist = !!pcie_aspm_sanity_check(pdev); 918 919 if (!aspm_support_enabled) 920 return; 921 922 if (pdev->link_state) 923 return; 924 925 /* 926 * We allocate pcie_link_state for the component on the upstream 927 * end of a Link, so there's nothing to do unless this device is 928 * downstream port. 929 */ 930 if (!pcie_downstream_port(pdev)) 931 return; 932 933 /* VIA has a strange chipset, root port is under a bridge */ 934 if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT && 935 pdev->bus->self) 936 return; 937 938 down_read(&pci_bus_sem); 939 if (list_empty(&pdev->subordinate->devices)) 940 goto out; 941 942 mutex_lock(&aspm_lock); 943 link = alloc_pcie_link_state(pdev); 944 if (!link) 945 goto unlock; 946 /* 947 * Setup initial ASPM state. Note that we need to configure 948 * upstream links also because capable state of them can be 949 * update through pcie_aspm_cap_init(). 950 */ 951 pcie_aspm_cap_init(link, blacklist); 952 953 /* Setup initial Clock PM state */ 954 pcie_clkpm_cap_init(link, blacklist); 955 956 /* 957 * At this stage drivers haven't had an opportunity to change the 958 * link policy setting. Enabling ASPM on broken hardware can cripple 959 * it even before the driver has had a chance to disable ASPM, so 960 * default to a safe level right now. If we're enabling ASPM beyond 961 * the BIOS's expectation, we'll do so once pci_enable_device() is 962 * called. 963 */ 964 if (aspm_policy != POLICY_POWERSAVE && 965 aspm_policy != POLICY_POWER_SUPERSAVE) { 966 pcie_config_aspm_path(link); 967 pcie_set_clkpm(link, policy_to_clkpm_state(link)); 968 } 969 970 pcie_aspm_update_sysfs_visibility(pdev); 971 972 unlock: 973 mutex_unlock(&aspm_lock); 974 out: 975 up_read(&pci_bus_sem); 976 } 977 978 /* Recheck latencies and update aspm_capable for links under the root */ 979 static void pcie_update_aspm_capable(struct pcie_link_state *root) 980 { 981 struct pcie_link_state *link; 982 BUG_ON(root->parent); 983 list_for_each_entry(link, &link_list, sibling) { 984 if (link->root != root) 985 continue; 986 link->aspm_capable = link->aspm_support; 987 } 988 list_for_each_entry(link, &link_list, sibling) { 989 struct pci_dev *child; 990 struct pci_bus *linkbus = link->pdev->subordinate; 991 if (link->root != root) 992 continue; 993 list_for_each_entry(child, &linkbus->devices, bus_list) { 994 if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) && 995 (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)) 996 continue; 997 pcie_aspm_check_latency(child); 998 } 999 } 1000 } 1001 1002 /* @pdev: the endpoint device */ 1003 void pcie_aspm_exit_link_state(struct pci_dev *pdev) 1004 { 1005 struct pci_dev *parent = pdev->bus->self; 1006 struct pcie_link_state *link, *root, *parent_link; 1007 1008 if (!parent || !parent->link_state) 1009 return; 1010 1011 down_read(&pci_bus_sem); 1012 mutex_lock(&aspm_lock); 1013 /* 1014 * All PCIe functions are in one slot, remove one function will remove 1015 * the whole slot, so just wait until we are the last function left. 1016 */ 1017 if (!list_empty(&parent->subordinate->devices)) 1018 goto out; 1019 1020 link = parent->link_state; 1021 root = link->root; 1022 parent_link = link->parent; 1023 1024 /* All functions are removed, so just disable ASPM for the link */ 1025 pcie_config_aspm_link(link, 0); 1026 list_del(&link->sibling); 1027 /* Clock PM is for endpoint device */ 1028 free_link_state(link); 1029 1030 /* Recheck latencies and configure upstream links */ 1031 if (parent_link) { 1032 pcie_update_aspm_capable(root); 1033 pcie_config_aspm_path(parent_link); 1034 } 1035 out: 1036 mutex_unlock(&aspm_lock); 1037 up_read(&pci_bus_sem); 1038 } 1039 1040 void pcie_aspm_powersave_config_link(struct pci_dev *pdev) 1041 { 1042 struct pcie_link_state *link = pdev->link_state; 1043 1044 if (aspm_disabled || !link) 1045 return; 1046 1047 if (aspm_policy != POLICY_POWERSAVE && 1048 aspm_policy != POLICY_POWER_SUPERSAVE) 1049 return; 1050 1051 down_read(&pci_bus_sem); 1052 mutex_lock(&aspm_lock); 1053 pcie_config_aspm_path(link); 1054 pcie_set_clkpm(link, policy_to_clkpm_state(link)); 1055 mutex_unlock(&aspm_lock); 1056 up_read(&pci_bus_sem); 1057 } 1058 1059 static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev) 1060 { 1061 struct pci_dev *bridge; 1062 1063 if (!pci_is_pcie(pdev)) 1064 return NULL; 1065 1066 bridge = pci_upstream_bridge(pdev); 1067 if (!bridge || !pci_is_pcie(bridge)) 1068 return NULL; 1069 1070 return bridge->link_state; 1071 } 1072 1073 static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem) 1074 { 1075 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1076 1077 if (!link) 1078 return -EINVAL; 1079 /* 1080 * A driver requested that ASPM be disabled on this device, but 1081 * if we don't have permission to manage ASPM (e.g., on ACPI 1082 * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and 1083 * the _OSC method), we can't honor that request. Windows has 1084 * a similar mechanism using "PciASPMOptOut", which is also 1085 * ignored in this situation. 1086 */ 1087 if (aspm_disabled) { 1088 pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n"); 1089 return -EPERM; 1090 } 1091 1092 if (sem) 1093 down_read(&pci_bus_sem); 1094 mutex_lock(&aspm_lock); 1095 if (state & PCIE_LINK_STATE_L0S) 1096 link->aspm_disable |= ASPM_STATE_L0S; 1097 if (state & PCIE_LINK_STATE_L1) 1098 /* L1 PM substates require L1 */ 1099 link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS; 1100 if (state & PCIE_LINK_STATE_L1_1) 1101 link->aspm_disable |= ASPM_STATE_L1_1; 1102 if (state & PCIE_LINK_STATE_L1_2) 1103 link->aspm_disable |= ASPM_STATE_L1_2; 1104 if (state & PCIE_LINK_STATE_L1_1_PCIPM) 1105 link->aspm_disable |= ASPM_STATE_L1_1_PCIPM; 1106 if (state & PCIE_LINK_STATE_L1_2_PCIPM) 1107 link->aspm_disable |= ASPM_STATE_L1_2_PCIPM; 1108 pcie_config_aspm_link(link, policy_to_aspm_state(link)); 1109 1110 if (state & PCIE_LINK_STATE_CLKPM) 1111 link->clkpm_disable = 1; 1112 pcie_set_clkpm(link, policy_to_clkpm_state(link)); 1113 mutex_unlock(&aspm_lock); 1114 if (sem) 1115 up_read(&pci_bus_sem); 1116 1117 return 0; 1118 } 1119 1120 int pci_disable_link_state_locked(struct pci_dev *pdev, int state) 1121 { 1122 return __pci_disable_link_state(pdev, state, false); 1123 } 1124 EXPORT_SYMBOL(pci_disable_link_state_locked); 1125 1126 /** 1127 * pci_disable_link_state - Disable device's link state, so the link will 1128 * never enter specific states. Note that if the BIOS didn't grant ASPM 1129 * control to the OS, this does nothing because we can't touch the LNKCTL 1130 * register. Returns 0 or a negative errno. 1131 * 1132 * @pdev: PCI device 1133 * @state: ASPM link state to disable 1134 */ 1135 int pci_disable_link_state(struct pci_dev *pdev, int state) 1136 { 1137 return __pci_disable_link_state(pdev, state, true); 1138 } 1139 EXPORT_SYMBOL(pci_disable_link_state); 1140 1141 static int pcie_aspm_set_policy(const char *val, 1142 const struct kernel_param *kp) 1143 { 1144 int i; 1145 struct pcie_link_state *link; 1146 1147 if (aspm_disabled) 1148 return -EPERM; 1149 i = sysfs_match_string(policy_str, val); 1150 if (i < 0) 1151 return i; 1152 if (i == aspm_policy) 1153 return 0; 1154 1155 down_read(&pci_bus_sem); 1156 mutex_lock(&aspm_lock); 1157 aspm_policy = i; 1158 list_for_each_entry(link, &link_list, sibling) { 1159 pcie_config_aspm_link(link, policy_to_aspm_state(link)); 1160 pcie_set_clkpm(link, policy_to_clkpm_state(link)); 1161 } 1162 mutex_unlock(&aspm_lock); 1163 up_read(&pci_bus_sem); 1164 return 0; 1165 } 1166 1167 static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp) 1168 { 1169 int i, cnt = 0; 1170 for (i = 0; i < ARRAY_SIZE(policy_str); i++) 1171 if (i == aspm_policy) 1172 cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]); 1173 else 1174 cnt += sprintf(buffer + cnt, "%s ", policy_str[i]); 1175 cnt += sprintf(buffer + cnt, "\n"); 1176 return cnt; 1177 } 1178 1179 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy, 1180 NULL, 0644); 1181 1182 /** 1183 * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device. 1184 * @pdev: Target device. 1185 * 1186 * Relies on the upstream bridge's link_state being valid. The link_state 1187 * is deallocated only when the last child of the bridge (i.e., @pdev or a 1188 * sibling) is removed, and the caller should be holding a reference to 1189 * @pdev, so this should be safe. 1190 */ 1191 bool pcie_aspm_enabled(struct pci_dev *pdev) 1192 { 1193 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1194 1195 if (!link) 1196 return false; 1197 1198 return link->aspm_enabled; 1199 } 1200 EXPORT_SYMBOL_GPL(pcie_aspm_enabled); 1201 1202 static ssize_t aspm_attr_show_common(struct device *dev, 1203 struct device_attribute *attr, 1204 char *buf, u8 state) 1205 { 1206 struct pci_dev *pdev = to_pci_dev(dev); 1207 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1208 1209 return sysfs_emit(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0); 1210 } 1211 1212 static ssize_t aspm_attr_store_common(struct device *dev, 1213 struct device_attribute *attr, 1214 const char *buf, size_t len, u8 state) 1215 { 1216 struct pci_dev *pdev = to_pci_dev(dev); 1217 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1218 bool state_enable; 1219 1220 if (kstrtobool(buf, &state_enable) < 0) 1221 return -EINVAL; 1222 1223 down_read(&pci_bus_sem); 1224 mutex_lock(&aspm_lock); 1225 1226 if (state_enable) { 1227 link->aspm_disable &= ~state; 1228 /* need to enable L1 for substates */ 1229 if (state & ASPM_STATE_L1SS) 1230 link->aspm_disable &= ~ASPM_STATE_L1; 1231 } else { 1232 link->aspm_disable |= state; 1233 } 1234 1235 pcie_config_aspm_link(link, policy_to_aspm_state(link)); 1236 1237 mutex_unlock(&aspm_lock); 1238 up_read(&pci_bus_sem); 1239 1240 return len; 1241 } 1242 1243 #define ASPM_ATTR(_f, _s) \ 1244 static ssize_t _f##_show(struct device *dev, \ 1245 struct device_attribute *attr, char *buf) \ 1246 { return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); } \ 1247 \ 1248 static ssize_t _f##_store(struct device *dev, \ 1249 struct device_attribute *attr, \ 1250 const char *buf, size_t len) \ 1251 { return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); } 1252 1253 ASPM_ATTR(l0s_aspm, L0S) 1254 ASPM_ATTR(l1_aspm, L1) 1255 ASPM_ATTR(l1_1_aspm, L1_1) 1256 ASPM_ATTR(l1_2_aspm, L1_2) 1257 ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM) 1258 ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM) 1259 1260 static ssize_t clkpm_show(struct device *dev, 1261 struct device_attribute *attr, char *buf) 1262 { 1263 struct pci_dev *pdev = to_pci_dev(dev); 1264 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1265 1266 return sysfs_emit(buf, "%d\n", link->clkpm_enabled); 1267 } 1268 1269 static ssize_t clkpm_store(struct device *dev, 1270 struct device_attribute *attr, 1271 const char *buf, size_t len) 1272 { 1273 struct pci_dev *pdev = to_pci_dev(dev); 1274 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1275 bool state_enable; 1276 1277 if (kstrtobool(buf, &state_enable) < 0) 1278 return -EINVAL; 1279 1280 down_read(&pci_bus_sem); 1281 mutex_lock(&aspm_lock); 1282 1283 link->clkpm_disable = !state_enable; 1284 pcie_set_clkpm(link, policy_to_clkpm_state(link)); 1285 1286 mutex_unlock(&aspm_lock); 1287 up_read(&pci_bus_sem); 1288 1289 return len; 1290 } 1291 1292 static DEVICE_ATTR_RW(clkpm); 1293 static DEVICE_ATTR_RW(l0s_aspm); 1294 static DEVICE_ATTR_RW(l1_aspm); 1295 static DEVICE_ATTR_RW(l1_1_aspm); 1296 static DEVICE_ATTR_RW(l1_2_aspm); 1297 static DEVICE_ATTR_RW(l1_1_pcipm); 1298 static DEVICE_ATTR_RW(l1_2_pcipm); 1299 1300 static struct attribute *aspm_ctrl_attrs[] = { 1301 &dev_attr_clkpm.attr, 1302 &dev_attr_l0s_aspm.attr, 1303 &dev_attr_l1_aspm.attr, 1304 &dev_attr_l1_1_aspm.attr, 1305 &dev_attr_l1_2_aspm.attr, 1306 &dev_attr_l1_1_pcipm.attr, 1307 &dev_attr_l1_2_pcipm.attr, 1308 NULL 1309 }; 1310 1311 static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj, 1312 struct attribute *a, int n) 1313 { 1314 struct device *dev = kobj_to_dev(kobj); 1315 struct pci_dev *pdev = to_pci_dev(dev); 1316 struct pcie_link_state *link = pcie_aspm_get_link(pdev); 1317 static const u8 aspm_state_map[] = { 1318 ASPM_STATE_L0S, 1319 ASPM_STATE_L1, 1320 ASPM_STATE_L1_1, 1321 ASPM_STATE_L1_2, 1322 ASPM_STATE_L1_1_PCIPM, 1323 ASPM_STATE_L1_2_PCIPM, 1324 }; 1325 1326 if (aspm_disabled || !link) 1327 return 0; 1328 1329 if (n == 0) 1330 return link->clkpm_capable ? a->mode : 0; 1331 1332 return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0; 1333 } 1334 1335 const struct attribute_group aspm_ctrl_attr_group = { 1336 .name = "link", 1337 .attrs = aspm_ctrl_attrs, 1338 .is_visible = aspm_ctrl_attrs_are_visible, 1339 }; 1340 1341 static int __init pcie_aspm_disable(char *str) 1342 { 1343 if (!strcmp(str, "off")) { 1344 aspm_policy = POLICY_DEFAULT; 1345 aspm_disabled = 1; 1346 aspm_support_enabled = false; 1347 printk(KERN_INFO "PCIe ASPM is disabled\n"); 1348 } else if (!strcmp(str, "force")) { 1349 aspm_force = 1; 1350 printk(KERN_INFO "PCIe ASPM is forcibly enabled\n"); 1351 } 1352 return 1; 1353 } 1354 1355 __setup("pcie_aspm=", pcie_aspm_disable); 1356 1357 void pcie_no_aspm(void) 1358 { 1359 /* 1360 * Disabling ASPM is intended to prevent the kernel from modifying 1361 * existing hardware state, not to clear existing state. To that end: 1362 * (a) set policy to POLICY_DEFAULT in order to avoid changing state 1363 * (b) prevent userspace from changing policy 1364 */ 1365 if (!aspm_force) { 1366 aspm_policy = POLICY_DEFAULT; 1367 aspm_disabled = 1; 1368 } 1369 } 1370 1371 bool pcie_aspm_support_enabled(void) 1372 { 1373 return aspm_support_enabled; 1374 } 1375