1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * PCI support in ACPI 4 * 5 * Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com> 6 * Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com> 7 * Copyright (C) 2004 Intel Corp. 8 */ 9 10 #include <linux/delay.h> 11 #include <linux/init.h> 12 #include <linux/irqdomain.h> 13 #include <linux/pci.h> 14 #include <linux/msi.h> 15 #include <linux/pci_hotplug.h> 16 #include <linux/module.h> 17 #include <linux/pci-acpi.h> 18 #include <linux/pm_runtime.h> 19 #include <linux/pm_qos.h> 20 #include <linux/rwsem.h> 21 #include "pci.h" 22 23 /* 24 * The GUID is defined in the PCI Firmware Specification available here: 25 * https://www.pcisig.com/members/downloads/pcifw_r3_1_13Dec10.pdf 26 */ 27 const guid_t pci_acpi_dsm_guid = 28 GUID_INIT(0xe5c937d0, 0x3553, 0x4d7a, 29 0x91, 0x17, 0xea, 0x4d, 0x19, 0xc3, 0x43, 0x4d); 30 31 #if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_ARM64) 32 static int acpi_get_rc_addr(struct acpi_device *adev, struct resource *res) 33 { 34 struct device *dev = &adev->dev; 35 struct resource_entry *entry; 36 struct list_head list; 37 unsigned long flags; 38 int ret; 39 40 INIT_LIST_HEAD(&list); 41 flags = IORESOURCE_MEM; 42 ret = acpi_dev_get_resources(adev, &list, 43 acpi_dev_filter_resource_type_cb, 44 (void *) flags); 45 if (ret < 0) { 46 dev_err(dev, "failed to parse _CRS method, error code %d\n", 47 ret); 48 return ret; 49 } 50 51 if (ret == 0) { 52 dev_err(dev, "no IO and memory resources present in _CRS\n"); 53 return -EINVAL; 54 } 55 56 entry = list_first_entry(&list, struct resource_entry, node); 57 *res = *entry->res; 58 acpi_dev_free_resource_list(&list); 59 return 0; 60 } 61 62 static acpi_status acpi_match_rc(acpi_handle handle, u32 lvl, void *context, 63 void **retval) 64 { 65 u16 *segment = context; 66 unsigned long long uid; 67 acpi_status status; 68 69 status = acpi_evaluate_integer(handle, "_UID", NULL, &uid); 70 if (ACPI_FAILURE(status) || uid != *segment) 71 return AE_CTRL_DEPTH; 72 73 *(acpi_handle *)retval = handle; 74 return AE_CTRL_TERMINATE; 75 } 76 77 int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment, 78 struct resource *res) 79 { 80 struct acpi_device *adev; 81 acpi_status status; 82 acpi_handle handle; 83 int ret; 84 85 status = acpi_get_devices(hid, acpi_match_rc, &segment, &handle); 86 if (ACPI_FAILURE(status)) { 87 dev_err(dev, "can't find _HID %s device to locate resources\n", 88 hid); 89 return -ENODEV; 90 } 91 92 adev = acpi_fetch_acpi_dev(handle); 93 if (!adev) 94 return -ENODEV; 95 96 ret = acpi_get_rc_addr(adev, res); 97 if (ret) { 98 dev_err(dev, "can't get resource from %s\n", 99 dev_name(&adev->dev)); 100 return ret; 101 } 102 103 return 0; 104 } 105 #endif 106 107 phys_addr_t acpi_pci_root_get_mcfg_addr(acpi_handle handle) 108 { 109 acpi_status status = AE_NOT_EXIST; 110 unsigned long long mcfg_addr; 111 112 if (handle) 113 status = acpi_evaluate_integer(handle, METHOD_NAME__CBA, 114 NULL, &mcfg_addr); 115 if (ACPI_FAILURE(status)) 116 return 0; 117 118 return (phys_addr_t)mcfg_addr; 119 } 120 121 /* _HPX PCI Setting Record (Type 0); same as _HPP */ 122 struct hpx_type0 { 123 u32 revision; /* Not present in _HPP */ 124 u8 cache_line_size; /* Not applicable to PCIe */ 125 u8 latency_timer; /* Not applicable to PCIe */ 126 u8 enable_serr; 127 u8 enable_perr; 128 }; 129 130 static struct hpx_type0 pci_default_type0 = { 131 .revision = 1, 132 .cache_line_size = 8, 133 .latency_timer = 0x40, 134 .enable_serr = 0, 135 .enable_perr = 0, 136 }; 137 138 static void program_hpx_type0(struct pci_dev *dev, struct hpx_type0 *hpx) 139 { 140 u16 pci_cmd, pci_bctl; 141 142 if (!hpx) 143 hpx = &pci_default_type0; 144 145 if (hpx->revision > 1) { 146 pci_warn(dev, "PCI settings rev %d not supported; using defaults\n", 147 hpx->revision); 148 hpx = &pci_default_type0; 149 } 150 151 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpx->cache_line_size); 152 pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpx->latency_timer); 153 pci_read_config_word(dev, PCI_COMMAND, &pci_cmd); 154 if (hpx->enable_serr) 155 pci_cmd |= PCI_COMMAND_SERR; 156 if (hpx->enable_perr) 157 pci_cmd |= PCI_COMMAND_PARITY; 158 pci_write_config_word(dev, PCI_COMMAND, pci_cmd); 159 160 /* Program bridge control value */ 161 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { 162 pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 163 hpx->latency_timer); 164 pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl); 165 if (hpx->enable_perr) 166 pci_bctl |= PCI_BRIDGE_CTL_PARITY; 167 pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl); 168 } 169 } 170 171 static acpi_status decode_type0_hpx_record(union acpi_object *record, 172 struct hpx_type0 *hpx0) 173 { 174 int i; 175 union acpi_object *fields = record->package.elements; 176 u32 revision = fields[1].integer.value; 177 178 switch (revision) { 179 case 1: 180 if (record->package.count != 6) 181 return AE_ERROR; 182 for (i = 2; i < 6; i++) 183 if (fields[i].type != ACPI_TYPE_INTEGER) 184 return AE_ERROR; 185 hpx0->revision = revision; 186 hpx0->cache_line_size = fields[2].integer.value; 187 hpx0->latency_timer = fields[3].integer.value; 188 hpx0->enable_serr = fields[4].integer.value; 189 hpx0->enable_perr = fields[5].integer.value; 190 break; 191 default: 192 pr_warn("%s: Type 0 Revision %d record not supported\n", 193 __func__, revision); 194 return AE_ERROR; 195 } 196 return AE_OK; 197 } 198 199 /* _HPX PCI-X Setting Record (Type 1) */ 200 struct hpx_type1 { 201 u32 revision; 202 u8 max_mem_read; 203 u8 avg_max_split; 204 u16 tot_max_split; 205 }; 206 207 static void program_hpx_type1(struct pci_dev *dev, struct hpx_type1 *hpx) 208 { 209 int pos; 210 211 if (!hpx) 212 return; 213 214 pos = pci_find_capability(dev, PCI_CAP_ID_PCIX); 215 if (!pos) 216 return; 217 218 pci_warn(dev, "PCI-X settings not supported\n"); 219 } 220 221 static acpi_status decode_type1_hpx_record(union acpi_object *record, 222 struct hpx_type1 *hpx1) 223 { 224 int i; 225 union acpi_object *fields = record->package.elements; 226 u32 revision = fields[1].integer.value; 227 228 switch (revision) { 229 case 1: 230 if (record->package.count != 5) 231 return AE_ERROR; 232 for (i = 2; i < 5; i++) 233 if (fields[i].type != ACPI_TYPE_INTEGER) 234 return AE_ERROR; 235 hpx1->revision = revision; 236 hpx1->max_mem_read = fields[2].integer.value; 237 hpx1->avg_max_split = fields[3].integer.value; 238 hpx1->tot_max_split = fields[4].integer.value; 239 break; 240 default: 241 pr_warn("%s: Type 1 Revision %d record not supported\n", 242 __func__, revision); 243 return AE_ERROR; 244 } 245 return AE_OK; 246 } 247 248 static bool pcie_root_rcb_set(struct pci_dev *dev) 249 { 250 struct pci_dev *rp = pcie_find_root_port(dev); 251 u16 lnkctl; 252 253 if (!rp) 254 return false; 255 256 pcie_capability_read_word(rp, PCI_EXP_LNKCTL, &lnkctl); 257 if (lnkctl & PCI_EXP_LNKCTL_RCB) 258 return true; 259 260 return false; 261 } 262 263 /* _HPX PCI Express Setting Record (Type 2) */ 264 struct hpx_type2 { 265 u32 revision; 266 u32 unc_err_mask_and; 267 u32 unc_err_mask_or; 268 u32 unc_err_sever_and; 269 u32 unc_err_sever_or; 270 u32 cor_err_mask_and; 271 u32 cor_err_mask_or; 272 u32 adv_err_cap_and; 273 u32 adv_err_cap_or; 274 u16 pci_exp_devctl_and; 275 u16 pci_exp_devctl_or; 276 u16 pci_exp_lnkctl_and; 277 u16 pci_exp_lnkctl_or; 278 u32 sec_unc_err_sever_and; 279 u32 sec_unc_err_sever_or; 280 u32 sec_unc_err_mask_and; 281 u32 sec_unc_err_mask_or; 282 }; 283 284 static void program_hpx_type2(struct pci_dev *dev, struct hpx_type2 *hpx) 285 { 286 int pos; 287 u32 reg32; 288 289 if (!hpx) 290 return; 291 292 if (!pci_is_pcie(dev)) 293 return; 294 295 if (hpx->revision > 1) { 296 pci_warn(dev, "PCIe settings rev %d not supported\n", 297 hpx->revision); 298 return; 299 } 300 301 /* 302 * Don't allow _HPX to change MPS or MRRS settings. We manage 303 * those to make sure they're consistent with the rest of the 304 * platform. 305 */ 306 hpx->pci_exp_devctl_and |= PCI_EXP_DEVCTL_PAYLOAD | 307 PCI_EXP_DEVCTL_READRQ; 308 hpx->pci_exp_devctl_or &= ~(PCI_EXP_DEVCTL_PAYLOAD | 309 PCI_EXP_DEVCTL_READRQ); 310 311 /* Initialize Device Control Register */ 312 pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, 313 ~hpx->pci_exp_devctl_and, hpx->pci_exp_devctl_or); 314 315 /* Initialize Link Control Register */ 316 if (pcie_cap_has_lnkctl(dev)) { 317 318 /* 319 * If the Root Port supports Read Completion Boundary of 320 * 128, set RCB to 128. Otherwise, clear it. 321 */ 322 hpx->pci_exp_lnkctl_and |= PCI_EXP_LNKCTL_RCB; 323 hpx->pci_exp_lnkctl_or &= ~PCI_EXP_LNKCTL_RCB; 324 if (pcie_root_rcb_set(dev)) 325 hpx->pci_exp_lnkctl_or |= PCI_EXP_LNKCTL_RCB; 326 327 pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL, 328 ~hpx->pci_exp_lnkctl_and, hpx->pci_exp_lnkctl_or); 329 } 330 331 /* Find Advanced Error Reporting Enhanced Capability */ 332 pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); 333 if (!pos) 334 return; 335 336 /* Initialize Uncorrectable Error Mask Register */ 337 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, ®32); 338 reg32 = (reg32 & hpx->unc_err_mask_and) | hpx->unc_err_mask_or; 339 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32); 340 341 /* Initialize Uncorrectable Error Severity Register */ 342 pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, ®32); 343 reg32 = (reg32 & hpx->unc_err_sever_and) | hpx->unc_err_sever_or; 344 pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32); 345 346 /* Initialize Correctable Error Mask Register */ 347 pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®32); 348 reg32 = (reg32 & hpx->cor_err_mask_and) | hpx->cor_err_mask_or; 349 pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32); 350 351 /* Initialize Advanced Error Capabilities and Control Register */ 352 pci_read_config_dword(dev, pos + PCI_ERR_CAP, ®32); 353 reg32 = (reg32 & hpx->adv_err_cap_and) | hpx->adv_err_cap_or; 354 355 /* Don't enable ECRC generation or checking if unsupported */ 356 if (!(reg32 & PCI_ERR_CAP_ECRC_GENC)) 357 reg32 &= ~PCI_ERR_CAP_ECRC_GENE; 358 if (!(reg32 & PCI_ERR_CAP_ECRC_CHKC)) 359 reg32 &= ~PCI_ERR_CAP_ECRC_CHKE; 360 pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32); 361 362 /* 363 * FIXME: The following two registers are not supported yet. 364 * 365 * o Secondary Uncorrectable Error Severity Register 366 * o Secondary Uncorrectable Error Mask Register 367 */ 368 } 369 370 static acpi_status decode_type2_hpx_record(union acpi_object *record, 371 struct hpx_type2 *hpx2) 372 { 373 int i; 374 union acpi_object *fields = record->package.elements; 375 u32 revision = fields[1].integer.value; 376 377 switch (revision) { 378 case 1: 379 if (record->package.count != 18) 380 return AE_ERROR; 381 for (i = 2; i < 18; i++) 382 if (fields[i].type != ACPI_TYPE_INTEGER) 383 return AE_ERROR; 384 hpx2->revision = revision; 385 hpx2->unc_err_mask_and = fields[2].integer.value; 386 hpx2->unc_err_mask_or = fields[3].integer.value; 387 hpx2->unc_err_sever_and = fields[4].integer.value; 388 hpx2->unc_err_sever_or = fields[5].integer.value; 389 hpx2->cor_err_mask_and = fields[6].integer.value; 390 hpx2->cor_err_mask_or = fields[7].integer.value; 391 hpx2->adv_err_cap_and = fields[8].integer.value; 392 hpx2->adv_err_cap_or = fields[9].integer.value; 393 hpx2->pci_exp_devctl_and = fields[10].integer.value; 394 hpx2->pci_exp_devctl_or = fields[11].integer.value; 395 hpx2->pci_exp_lnkctl_and = fields[12].integer.value; 396 hpx2->pci_exp_lnkctl_or = fields[13].integer.value; 397 hpx2->sec_unc_err_sever_and = fields[14].integer.value; 398 hpx2->sec_unc_err_sever_or = fields[15].integer.value; 399 hpx2->sec_unc_err_mask_and = fields[16].integer.value; 400 hpx2->sec_unc_err_mask_or = fields[17].integer.value; 401 break; 402 default: 403 pr_warn("%s: Type 2 Revision %d record not supported\n", 404 __func__, revision); 405 return AE_ERROR; 406 } 407 return AE_OK; 408 } 409 410 /* _HPX PCI Express Setting Record (Type 3) */ 411 struct hpx_type3 { 412 u16 device_type; 413 u16 function_type; 414 u16 config_space_location; 415 u16 pci_exp_cap_id; 416 u16 pci_exp_cap_ver; 417 u16 pci_exp_vendor_id; 418 u16 dvsec_id; 419 u16 dvsec_rev; 420 u16 match_offset; 421 u32 match_mask_and; 422 u32 match_value; 423 u16 reg_offset; 424 u32 reg_mask_and; 425 u32 reg_mask_or; 426 }; 427 428 enum hpx_type3_dev_type { 429 HPX_TYPE_ENDPOINT = BIT(0), 430 HPX_TYPE_LEG_END = BIT(1), 431 HPX_TYPE_RC_END = BIT(2), 432 HPX_TYPE_RC_EC = BIT(3), 433 HPX_TYPE_ROOT_PORT = BIT(4), 434 HPX_TYPE_UPSTREAM = BIT(5), 435 HPX_TYPE_DOWNSTREAM = BIT(6), 436 HPX_TYPE_PCI_BRIDGE = BIT(7), 437 HPX_TYPE_PCIE_BRIDGE = BIT(8), 438 }; 439 440 static u16 hpx3_device_type(struct pci_dev *dev) 441 { 442 u16 pcie_type = pci_pcie_type(dev); 443 static const int pcie_to_hpx3_type[] = { 444 [PCI_EXP_TYPE_ENDPOINT] = HPX_TYPE_ENDPOINT, 445 [PCI_EXP_TYPE_LEG_END] = HPX_TYPE_LEG_END, 446 [PCI_EXP_TYPE_RC_END] = HPX_TYPE_RC_END, 447 [PCI_EXP_TYPE_RC_EC] = HPX_TYPE_RC_EC, 448 [PCI_EXP_TYPE_ROOT_PORT] = HPX_TYPE_ROOT_PORT, 449 [PCI_EXP_TYPE_UPSTREAM] = HPX_TYPE_UPSTREAM, 450 [PCI_EXP_TYPE_DOWNSTREAM] = HPX_TYPE_DOWNSTREAM, 451 [PCI_EXP_TYPE_PCI_BRIDGE] = HPX_TYPE_PCI_BRIDGE, 452 [PCI_EXP_TYPE_PCIE_BRIDGE] = HPX_TYPE_PCIE_BRIDGE, 453 }; 454 455 if (pcie_type >= ARRAY_SIZE(pcie_to_hpx3_type)) 456 return 0; 457 458 return pcie_to_hpx3_type[pcie_type]; 459 } 460 461 enum hpx_type3_fn_type { 462 HPX_FN_NORMAL = BIT(0), 463 HPX_FN_SRIOV_PHYS = BIT(1), 464 HPX_FN_SRIOV_VIRT = BIT(2), 465 }; 466 467 static u8 hpx3_function_type(struct pci_dev *dev) 468 { 469 if (dev->is_virtfn) 470 return HPX_FN_SRIOV_VIRT; 471 else if (pci_find_ext_capability(dev, PCI_EXT_CAP_ID_SRIOV) > 0) 472 return HPX_FN_SRIOV_PHYS; 473 else 474 return HPX_FN_NORMAL; 475 } 476 477 static bool hpx3_cap_ver_matches(u8 pcie_cap_id, u8 hpx3_cap_id) 478 { 479 u8 cap_ver = hpx3_cap_id & 0xf; 480 481 if ((hpx3_cap_id & BIT(4)) && cap_ver >= pcie_cap_id) 482 return true; 483 else if (cap_ver == pcie_cap_id) 484 return true; 485 486 return false; 487 } 488 489 enum hpx_type3_cfg_loc { 490 HPX_CFG_PCICFG = 0, 491 HPX_CFG_PCIE_CAP = 1, 492 HPX_CFG_PCIE_CAP_EXT = 2, 493 HPX_CFG_VEND_CAP = 3, 494 HPX_CFG_DVSEC = 4, 495 HPX_CFG_MAX, 496 }; 497 498 static void program_hpx_type3_register(struct pci_dev *dev, 499 const struct hpx_type3 *reg) 500 { 501 u32 match_reg, write_reg, header, orig_value; 502 u16 pos; 503 504 if (!(hpx3_device_type(dev) & reg->device_type)) 505 return; 506 507 if (!(hpx3_function_type(dev) & reg->function_type)) 508 return; 509 510 switch (reg->config_space_location) { 511 case HPX_CFG_PCICFG: 512 pos = 0; 513 break; 514 case HPX_CFG_PCIE_CAP: 515 pos = pci_find_capability(dev, reg->pci_exp_cap_id); 516 if (pos == 0) 517 return; 518 519 break; 520 case HPX_CFG_PCIE_CAP_EXT: 521 pos = pci_find_ext_capability(dev, reg->pci_exp_cap_id); 522 if (pos == 0) 523 return; 524 525 pci_read_config_dword(dev, pos, &header); 526 if (!hpx3_cap_ver_matches(PCI_EXT_CAP_VER(header), 527 reg->pci_exp_cap_ver)) 528 return; 529 530 break; 531 case HPX_CFG_VEND_CAP: 532 case HPX_CFG_DVSEC: 533 default: 534 pci_warn(dev, "Encountered _HPX type 3 with unsupported config space location"); 535 return; 536 } 537 538 pci_read_config_dword(dev, pos + reg->match_offset, &match_reg); 539 540 if ((match_reg & reg->match_mask_and) != reg->match_value) 541 return; 542 543 pci_read_config_dword(dev, pos + reg->reg_offset, &write_reg); 544 orig_value = write_reg; 545 write_reg &= reg->reg_mask_and; 546 write_reg |= reg->reg_mask_or; 547 548 if (orig_value == write_reg) 549 return; 550 551 pci_write_config_dword(dev, pos + reg->reg_offset, write_reg); 552 553 pci_dbg(dev, "Applied _HPX3 at [0x%x]: 0x%08x -> 0x%08x", 554 pos, orig_value, write_reg); 555 } 556 557 static void program_hpx_type3(struct pci_dev *dev, struct hpx_type3 *hpx) 558 { 559 if (!hpx) 560 return; 561 562 if (!pci_is_pcie(dev)) 563 return; 564 565 program_hpx_type3_register(dev, hpx); 566 } 567 568 static void parse_hpx3_register(struct hpx_type3 *hpx3_reg, 569 union acpi_object *reg_fields) 570 { 571 hpx3_reg->device_type = reg_fields[0].integer.value; 572 hpx3_reg->function_type = reg_fields[1].integer.value; 573 hpx3_reg->config_space_location = reg_fields[2].integer.value; 574 hpx3_reg->pci_exp_cap_id = reg_fields[3].integer.value; 575 hpx3_reg->pci_exp_cap_ver = reg_fields[4].integer.value; 576 hpx3_reg->pci_exp_vendor_id = reg_fields[5].integer.value; 577 hpx3_reg->dvsec_id = reg_fields[6].integer.value; 578 hpx3_reg->dvsec_rev = reg_fields[7].integer.value; 579 hpx3_reg->match_offset = reg_fields[8].integer.value; 580 hpx3_reg->match_mask_and = reg_fields[9].integer.value; 581 hpx3_reg->match_value = reg_fields[10].integer.value; 582 hpx3_reg->reg_offset = reg_fields[11].integer.value; 583 hpx3_reg->reg_mask_and = reg_fields[12].integer.value; 584 hpx3_reg->reg_mask_or = reg_fields[13].integer.value; 585 } 586 587 static acpi_status program_type3_hpx_record(struct pci_dev *dev, 588 union acpi_object *record) 589 { 590 union acpi_object *fields = record->package.elements; 591 u32 desc_count, expected_length, revision; 592 union acpi_object *reg_fields; 593 struct hpx_type3 hpx3; 594 int i; 595 596 revision = fields[1].integer.value; 597 switch (revision) { 598 case 1: 599 desc_count = fields[2].integer.value; 600 expected_length = 3 + desc_count * 14; 601 602 if (record->package.count != expected_length) 603 return AE_ERROR; 604 605 for (i = 2; i < expected_length; i++) 606 if (fields[i].type != ACPI_TYPE_INTEGER) 607 return AE_ERROR; 608 609 for (i = 0; i < desc_count; i++) { 610 reg_fields = fields + 3 + i * 14; 611 parse_hpx3_register(&hpx3, reg_fields); 612 program_hpx_type3(dev, &hpx3); 613 } 614 615 break; 616 default: 617 printk(KERN_WARNING 618 "%s: Type 3 Revision %d record not supported\n", 619 __func__, revision); 620 return AE_ERROR; 621 } 622 return AE_OK; 623 } 624 625 static acpi_status acpi_run_hpx(struct pci_dev *dev, acpi_handle handle) 626 { 627 acpi_status status; 628 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; 629 union acpi_object *package, *record, *fields; 630 struct hpx_type0 hpx0; 631 struct hpx_type1 hpx1; 632 struct hpx_type2 hpx2; 633 u32 type; 634 int i; 635 636 status = acpi_evaluate_object(handle, "_HPX", NULL, &buffer); 637 if (ACPI_FAILURE(status)) 638 return status; 639 640 package = (union acpi_object *)buffer.pointer; 641 if (package->type != ACPI_TYPE_PACKAGE) { 642 status = AE_ERROR; 643 goto exit; 644 } 645 646 for (i = 0; i < package->package.count; i++) { 647 record = &package->package.elements[i]; 648 if (record->type != ACPI_TYPE_PACKAGE) { 649 status = AE_ERROR; 650 goto exit; 651 } 652 653 fields = record->package.elements; 654 if (fields[0].type != ACPI_TYPE_INTEGER || 655 fields[1].type != ACPI_TYPE_INTEGER) { 656 status = AE_ERROR; 657 goto exit; 658 } 659 660 type = fields[0].integer.value; 661 switch (type) { 662 case 0: 663 memset(&hpx0, 0, sizeof(hpx0)); 664 status = decode_type0_hpx_record(record, &hpx0); 665 if (ACPI_FAILURE(status)) 666 goto exit; 667 program_hpx_type0(dev, &hpx0); 668 break; 669 case 1: 670 memset(&hpx1, 0, sizeof(hpx1)); 671 status = decode_type1_hpx_record(record, &hpx1); 672 if (ACPI_FAILURE(status)) 673 goto exit; 674 program_hpx_type1(dev, &hpx1); 675 break; 676 case 2: 677 memset(&hpx2, 0, sizeof(hpx2)); 678 status = decode_type2_hpx_record(record, &hpx2); 679 if (ACPI_FAILURE(status)) 680 goto exit; 681 program_hpx_type2(dev, &hpx2); 682 break; 683 case 3: 684 status = program_type3_hpx_record(dev, record); 685 if (ACPI_FAILURE(status)) 686 goto exit; 687 break; 688 default: 689 pr_err("%s: Type %d record not supported\n", 690 __func__, type); 691 status = AE_ERROR; 692 goto exit; 693 } 694 } 695 exit: 696 kfree(buffer.pointer); 697 return status; 698 } 699 700 static acpi_status acpi_run_hpp(struct pci_dev *dev, acpi_handle handle) 701 { 702 acpi_status status; 703 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; 704 union acpi_object *package, *fields; 705 struct hpx_type0 hpx0; 706 int i; 707 708 memset(&hpx0, 0, sizeof(hpx0)); 709 710 status = acpi_evaluate_object(handle, "_HPP", NULL, &buffer); 711 if (ACPI_FAILURE(status)) 712 return status; 713 714 package = (union acpi_object *) buffer.pointer; 715 if (package->type != ACPI_TYPE_PACKAGE || 716 package->package.count != 4) { 717 status = AE_ERROR; 718 goto exit; 719 } 720 721 fields = package->package.elements; 722 for (i = 0; i < 4; i++) { 723 if (fields[i].type != ACPI_TYPE_INTEGER) { 724 status = AE_ERROR; 725 goto exit; 726 } 727 } 728 729 hpx0.revision = 1; 730 hpx0.cache_line_size = fields[0].integer.value; 731 hpx0.latency_timer = fields[1].integer.value; 732 hpx0.enable_serr = fields[2].integer.value; 733 hpx0.enable_perr = fields[3].integer.value; 734 735 program_hpx_type0(dev, &hpx0); 736 737 exit: 738 kfree(buffer.pointer); 739 return status; 740 } 741 742 /* pci_acpi_program_hp_params 743 * 744 * @dev - the pci_dev for which we want parameters 745 */ 746 int pci_acpi_program_hp_params(struct pci_dev *dev) 747 { 748 acpi_status status; 749 acpi_handle handle, phandle; 750 struct pci_bus *pbus; 751 752 if (acpi_pci_disabled) 753 return -ENODEV; 754 755 handle = NULL; 756 for (pbus = dev->bus; pbus; pbus = pbus->parent) { 757 handle = acpi_pci_get_bridge_handle(pbus); 758 if (handle) 759 break; 760 } 761 762 /* 763 * _HPP settings apply to all child buses, until another _HPP is 764 * encountered. If we don't find an _HPP for the input pci dev, 765 * look for it in the parent device scope since that would apply to 766 * this pci dev. 767 */ 768 while (handle) { 769 status = acpi_run_hpx(dev, handle); 770 if (ACPI_SUCCESS(status)) 771 return 0; 772 status = acpi_run_hpp(dev, handle); 773 if (ACPI_SUCCESS(status)) 774 return 0; 775 if (acpi_is_root_bridge(handle)) 776 break; 777 status = acpi_get_parent(handle, &phandle); 778 if (ACPI_FAILURE(status)) 779 break; 780 handle = phandle; 781 } 782 return -ENODEV; 783 } 784 785 /** 786 * pciehp_is_native - Check whether a hotplug port is handled by the OS 787 * @bridge: Hotplug port to check 788 * 789 * Returns true if the given @bridge is handled by the native PCIe hotplug 790 * driver. 791 */ 792 bool pciehp_is_native(struct pci_dev *bridge) 793 { 794 const struct pci_host_bridge *host; 795 u32 slot_cap; 796 797 if (!IS_ENABLED(CONFIG_HOTPLUG_PCI_PCIE)) 798 return false; 799 800 pcie_capability_read_dword(bridge, PCI_EXP_SLTCAP, &slot_cap); 801 if (!(slot_cap & PCI_EXP_SLTCAP_HPC)) 802 return false; 803 804 if (pcie_ports_native) 805 return true; 806 807 host = pci_find_host_bridge(bridge->bus); 808 return host->native_pcie_hotplug; 809 } 810 811 /** 812 * shpchp_is_native - Check whether a hotplug port is handled by the OS 813 * @bridge: Hotplug port to check 814 * 815 * Returns true if the given @bridge is handled by the native SHPC hotplug 816 * driver. 817 */ 818 bool shpchp_is_native(struct pci_dev *bridge) 819 { 820 return bridge->shpc_managed; 821 } 822 823 /** 824 * pci_acpi_wake_bus - Root bus wakeup notification fork function. 825 * @context: Device wakeup context. 826 */ 827 static void pci_acpi_wake_bus(struct acpi_device_wakeup_context *context) 828 { 829 struct acpi_device *adev; 830 struct acpi_pci_root *root; 831 832 adev = container_of(context, struct acpi_device, wakeup.context); 833 root = acpi_driver_data(adev); 834 pci_pme_wakeup_bus(root->bus); 835 } 836 837 /** 838 * pci_acpi_wake_dev - PCI device wakeup notification work function. 839 * @context: Device wakeup context. 840 */ 841 static void pci_acpi_wake_dev(struct acpi_device_wakeup_context *context) 842 { 843 struct pci_dev *pci_dev; 844 845 pci_dev = to_pci_dev(context->dev); 846 847 if (pci_dev->pme_poll) 848 pci_dev->pme_poll = false; 849 850 if (pci_dev->current_state == PCI_D3cold) { 851 pci_wakeup_event(pci_dev); 852 pm_request_resume(&pci_dev->dev); 853 return; 854 } 855 856 /* Clear PME Status if set. */ 857 if (pci_dev->pme_support) 858 pci_check_pme_status(pci_dev); 859 860 pci_wakeup_event(pci_dev); 861 pm_request_resume(&pci_dev->dev); 862 863 pci_pme_wakeup_bus(pci_dev->subordinate); 864 } 865 866 /** 867 * pci_acpi_add_bus_pm_notifier - Register PM notifier for root PCI bus. 868 * @dev: PCI root bridge ACPI device. 869 */ 870 acpi_status pci_acpi_add_bus_pm_notifier(struct acpi_device *dev) 871 { 872 return acpi_add_pm_notifier(dev, NULL, pci_acpi_wake_bus); 873 } 874 875 /** 876 * pci_acpi_add_pm_notifier - Register PM notifier for given PCI device. 877 * @dev: ACPI device to add the notifier for. 878 * @pci_dev: PCI device to check for the PME status if an event is signaled. 879 */ 880 acpi_status pci_acpi_add_pm_notifier(struct acpi_device *dev, 881 struct pci_dev *pci_dev) 882 { 883 return acpi_add_pm_notifier(dev, &pci_dev->dev, pci_acpi_wake_dev); 884 } 885 886 /* 887 * _SxD returns the D-state with the highest power 888 * (lowest D-state number) supported in the S-state "x". 889 * 890 * If the devices does not have a _PRW 891 * (Power Resources for Wake) supporting system wakeup from "x" 892 * then the OS is free to choose a lower power (higher number 893 * D-state) than the return value from _SxD. 894 * 895 * But if _PRW is enabled at S-state "x", the OS 896 * must not choose a power lower than _SxD -- 897 * unless the device has an _SxW method specifying 898 * the lowest power (highest D-state number) the device 899 * may enter while still able to wake the system. 900 * 901 * ie. depending on global OS policy: 902 * 903 * if (_PRW at S-state x) 904 * choose from highest power _SxD to lowest power _SxW 905 * else // no _PRW at S-state x 906 * choose highest power _SxD or any lower power 907 */ 908 909 pci_power_t acpi_pci_choose_state(struct pci_dev *pdev) 910 { 911 int acpi_state, d_max; 912 913 if (pdev->no_d3cold) 914 d_max = ACPI_STATE_D3_HOT; 915 else 916 d_max = ACPI_STATE_D3_COLD; 917 acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL, d_max); 918 if (acpi_state < 0) 919 return PCI_POWER_ERROR; 920 921 switch (acpi_state) { 922 case ACPI_STATE_D0: 923 return PCI_D0; 924 case ACPI_STATE_D1: 925 return PCI_D1; 926 case ACPI_STATE_D2: 927 return PCI_D2; 928 case ACPI_STATE_D3_HOT: 929 return PCI_D3hot; 930 case ACPI_STATE_D3_COLD: 931 return PCI_D3cold; 932 } 933 return PCI_POWER_ERROR; 934 } 935 936 static struct acpi_device *acpi_pci_find_companion(struct device *dev); 937 938 void pci_set_acpi_fwnode(struct pci_dev *dev) 939 { 940 if (!dev_fwnode(&dev->dev) && !pci_dev_is_added(dev)) 941 ACPI_COMPANION_SET(&dev->dev, 942 acpi_pci_find_companion(&dev->dev)); 943 } 944 945 /** 946 * pci_dev_acpi_reset - do a function level reset using _RST method 947 * @dev: device to reset 948 * @probe: if true, return 0 if device supports _RST 949 */ 950 int pci_dev_acpi_reset(struct pci_dev *dev, bool probe) 951 { 952 acpi_handle handle = ACPI_HANDLE(&dev->dev); 953 954 if (!handle || !acpi_has_method(handle, "_RST")) 955 return -ENOTTY; 956 957 if (probe) 958 return 0; 959 960 if (ACPI_FAILURE(acpi_evaluate_object(handle, "_RST", NULL, NULL))) { 961 pci_warn(dev, "ACPI _RST failed\n"); 962 return -ENOTTY; 963 } 964 965 return 0; 966 } 967 968 bool acpi_pci_power_manageable(struct pci_dev *dev) 969 { 970 struct acpi_device *adev = ACPI_COMPANION(&dev->dev); 971 972 return adev && acpi_device_power_manageable(adev); 973 } 974 975 bool acpi_pci_bridge_d3(struct pci_dev *dev) 976 { 977 const union acpi_object *obj; 978 struct acpi_device *adev; 979 struct pci_dev *rpdev; 980 981 if (acpi_pci_disabled || !dev->is_hotplug_bridge) 982 return false; 983 984 /* Assume D3 support if the bridge is power-manageable by ACPI. */ 985 if (acpi_pci_power_manageable(dev)) 986 return true; 987 988 /* 989 * The ACPI firmware will provide the device-specific properties through 990 * _DSD configuration object. Look for the 'HotPlugSupportInD3' property 991 * for the root port and if it is set we know the hierarchy behind it 992 * supports D3 just fine. 993 */ 994 rpdev = pcie_find_root_port(dev); 995 if (!rpdev) 996 return false; 997 998 adev = ACPI_COMPANION(&rpdev->dev); 999 if (!adev) 1000 return false; 1001 1002 if (acpi_dev_get_property(adev, "HotPlugSupportInD3", 1003 ACPI_TYPE_INTEGER, &obj) < 0) 1004 return false; 1005 1006 return obj->integer.value == 1; 1007 } 1008 1009 int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) 1010 { 1011 struct acpi_device *adev = ACPI_COMPANION(&dev->dev); 1012 static const u8 state_conv[] = { 1013 [PCI_D0] = ACPI_STATE_D0, 1014 [PCI_D1] = ACPI_STATE_D1, 1015 [PCI_D2] = ACPI_STATE_D2, 1016 [PCI_D3hot] = ACPI_STATE_D3_HOT, 1017 [PCI_D3cold] = ACPI_STATE_D3_COLD, 1018 }; 1019 int error = -EINVAL; 1020 1021 /* If the ACPI device has _EJ0, ignore the device */ 1022 if (!adev || acpi_has_method(adev->handle, "_EJ0")) 1023 return -ENODEV; 1024 1025 switch (state) { 1026 case PCI_D3cold: 1027 if (dev_pm_qos_flags(&dev->dev, PM_QOS_FLAG_NO_POWER_OFF) == 1028 PM_QOS_FLAGS_ALL) { 1029 error = -EBUSY; 1030 break; 1031 } 1032 fallthrough; 1033 case PCI_D0: 1034 case PCI_D1: 1035 case PCI_D2: 1036 case PCI_D3hot: 1037 error = acpi_device_set_power(adev, state_conv[state]); 1038 } 1039 1040 if (!error) 1041 pci_dbg(dev, "power state changed by ACPI to %s\n", 1042 acpi_power_state_string(adev->power.state)); 1043 1044 return error; 1045 } 1046 1047 pci_power_t acpi_pci_get_power_state(struct pci_dev *dev) 1048 { 1049 struct acpi_device *adev = ACPI_COMPANION(&dev->dev); 1050 static const pci_power_t state_conv[] = { 1051 [ACPI_STATE_D0] = PCI_D0, 1052 [ACPI_STATE_D1] = PCI_D1, 1053 [ACPI_STATE_D2] = PCI_D2, 1054 [ACPI_STATE_D3_HOT] = PCI_D3hot, 1055 [ACPI_STATE_D3_COLD] = PCI_D3cold, 1056 }; 1057 int state; 1058 1059 if (!adev || !acpi_device_power_manageable(adev)) 1060 return PCI_UNKNOWN; 1061 1062 state = adev->power.state; 1063 if (state == ACPI_STATE_UNKNOWN) 1064 return PCI_UNKNOWN; 1065 1066 return state_conv[state]; 1067 } 1068 1069 void acpi_pci_refresh_power_state(struct pci_dev *dev) 1070 { 1071 struct acpi_device *adev = ACPI_COMPANION(&dev->dev); 1072 1073 if (adev && acpi_device_power_manageable(adev)) 1074 acpi_device_update_power(adev, NULL); 1075 } 1076 1077 static int acpi_pci_propagate_wakeup(struct pci_bus *bus, bool enable) 1078 { 1079 while (bus->parent) { 1080 if (acpi_pm_device_can_wakeup(&bus->self->dev)) 1081 return acpi_pm_set_device_wakeup(&bus->self->dev, enable); 1082 1083 bus = bus->parent; 1084 } 1085 1086 /* We have reached the root bus. */ 1087 if (bus->bridge) { 1088 if (acpi_pm_device_can_wakeup(bus->bridge)) 1089 return acpi_pm_set_device_wakeup(bus->bridge, enable); 1090 } 1091 return 0; 1092 } 1093 1094 int acpi_pci_wakeup(struct pci_dev *dev, bool enable) 1095 { 1096 if (acpi_pci_disabled) 1097 return 0; 1098 1099 if (acpi_pm_device_can_wakeup(&dev->dev)) 1100 return acpi_pm_set_device_wakeup(&dev->dev, enable); 1101 1102 return acpi_pci_propagate_wakeup(dev->bus, enable); 1103 } 1104 1105 bool acpi_pci_need_resume(struct pci_dev *dev) 1106 { 1107 struct acpi_device *adev; 1108 1109 if (acpi_pci_disabled) 1110 return false; 1111 1112 /* 1113 * In some cases (eg. Samsung 305V4A) leaving a bridge in suspend over 1114 * system-wide suspend/resume confuses the platform firmware, so avoid 1115 * doing that. According to Section 16.1.6 of ACPI 6.2, endpoint 1116 * devices are expected to be in D3 before invoking the S3 entry path 1117 * from the firmware, so they should not be affected by this issue. 1118 */ 1119 if (pci_is_bridge(dev) && acpi_target_system_state() != ACPI_STATE_S0) 1120 return true; 1121 1122 adev = ACPI_COMPANION(&dev->dev); 1123 if (!adev || !acpi_device_power_manageable(adev)) 1124 return false; 1125 1126 if (adev->wakeup.flags.valid && 1127 device_may_wakeup(&dev->dev) != !!adev->wakeup.prepare_count) 1128 return true; 1129 1130 if (acpi_target_system_state() == ACPI_STATE_S0) 1131 return false; 1132 1133 return !!adev->power.flags.dsw_present; 1134 } 1135 1136 void acpi_pci_add_bus(struct pci_bus *bus) 1137 { 1138 union acpi_object *obj; 1139 struct pci_host_bridge *bridge; 1140 1141 if (acpi_pci_disabled || !bus->bridge || !ACPI_HANDLE(bus->bridge)) 1142 return; 1143 1144 acpi_pci_slot_enumerate(bus); 1145 acpiphp_enumerate_slots(bus); 1146 1147 /* 1148 * For a host bridge, check its _DSM for function 8 and if 1149 * that is available, mark it in pci_host_bridge. 1150 */ 1151 if (!pci_is_root_bus(bus)) 1152 return; 1153 1154 obj = acpi_evaluate_dsm(ACPI_HANDLE(bus->bridge), &pci_acpi_dsm_guid, 3, 1155 DSM_PCI_POWER_ON_RESET_DELAY, NULL); 1156 if (!obj) 1157 return; 1158 1159 if (obj->type == ACPI_TYPE_INTEGER && obj->integer.value == 1) { 1160 bridge = pci_find_host_bridge(bus); 1161 bridge->ignore_reset_delay = 1; 1162 } 1163 ACPI_FREE(obj); 1164 } 1165 1166 void acpi_pci_remove_bus(struct pci_bus *bus) 1167 { 1168 if (acpi_pci_disabled || !bus->bridge) 1169 return; 1170 1171 acpiphp_remove_slots(bus); 1172 acpi_pci_slot_remove(bus); 1173 } 1174 1175 /* ACPI bus type */ 1176 1177 1178 static DECLARE_RWSEM(pci_acpi_companion_lookup_sem); 1179 static struct acpi_device *(*pci_acpi_find_companion_hook)(struct pci_dev *); 1180 1181 /** 1182 * pci_acpi_set_companion_lookup_hook - Set ACPI companion lookup callback. 1183 * @func: ACPI companion lookup callback pointer or NULL. 1184 * 1185 * Set a special ACPI companion lookup callback for PCI devices whose companion 1186 * objects in the ACPI namespace have _ADR with non-standard bus-device-function 1187 * encodings. 1188 * 1189 * Return 0 on success or a negative error code on failure (in which case no 1190 * changes are made). 1191 * 1192 * The caller is responsible for the appropriate ordering of the invocations of 1193 * this function with respect to the enumeration of the PCI devices needing the 1194 * callback installed by it. 1195 */ 1196 int pci_acpi_set_companion_lookup_hook(struct acpi_device *(*func)(struct pci_dev *)) 1197 { 1198 int ret; 1199 1200 if (!func) 1201 return -EINVAL; 1202 1203 down_write(&pci_acpi_companion_lookup_sem); 1204 1205 if (pci_acpi_find_companion_hook) { 1206 ret = -EBUSY; 1207 } else { 1208 pci_acpi_find_companion_hook = func; 1209 ret = 0; 1210 } 1211 1212 up_write(&pci_acpi_companion_lookup_sem); 1213 1214 return ret; 1215 } 1216 EXPORT_SYMBOL_GPL(pci_acpi_set_companion_lookup_hook); 1217 1218 /** 1219 * pci_acpi_clear_companion_lookup_hook - Clear ACPI companion lookup callback. 1220 * 1221 * Clear the special ACPI companion lookup callback previously set by 1222 * pci_acpi_set_companion_lookup_hook(). Block until the last running instance 1223 * of the callback returns before clearing it. 1224 * 1225 * The caller is responsible for the appropriate ordering of the invocations of 1226 * this function with respect to the enumeration of the PCI devices needing the 1227 * callback cleared by it. 1228 */ 1229 void pci_acpi_clear_companion_lookup_hook(void) 1230 { 1231 down_write(&pci_acpi_companion_lookup_sem); 1232 1233 pci_acpi_find_companion_hook = NULL; 1234 1235 up_write(&pci_acpi_companion_lookup_sem); 1236 } 1237 EXPORT_SYMBOL_GPL(pci_acpi_clear_companion_lookup_hook); 1238 1239 static struct acpi_device *acpi_pci_find_companion(struct device *dev) 1240 { 1241 struct pci_dev *pci_dev = to_pci_dev(dev); 1242 struct acpi_device *adev; 1243 bool check_children; 1244 u64 addr; 1245 1246 if (!dev->parent) 1247 return NULL; 1248 1249 down_read(&pci_acpi_companion_lookup_sem); 1250 1251 adev = pci_acpi_find_companion_hook ? 1252 pci_acpi_find_companion_hook(pci_dev) : NULL; 1253 1254 up_read(&pci_acpi_companion_lookup_sem); 1255 1256 if (adev) 1257 return adev; 1258 1259 check_children = pci_is_bridge(pci_dev); 1260 /* Please ref to ACPI spec for the syntax of _ADR */ 1261 addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn); 1262 adev = acpi_find_child_device(ACPI_COMPANION(dev->parent), addr, 1263 check_children); 1264 1265 /* 1266 * There may be ACPI device objects in the ACPI namespace that are 1267 * children of the device object representing the host bridge, but don't 1268 * represent PCI devices. Both _HID and _ADR may be present for them, 1269 * even though that is against the specification (for example, see 1270 * Section 6.1 of ACPI 6.3), but in many cases the _ADR returns 0 which 1271 * appears to indicate that they should not be taken into consideration 1272 * as potential companions of PCI devices on the root bus. 1273 * 1274 * To catch this special case, disregard the returned device object if 1275 * it has a valid _HID, addr is 0 and the PCI device at hand is on the 1276 * root bus. 1277 */ 1278 if (adev && adev->pnp.type.platform_id && !addr && 1279 pci_is_root_bus(pci_dev->bus)) 1280 return NULL; 1281 1282 return adev; 1283 } 1284 1285 /** 1286 * pci_acpi_optimize_delay - optimize PCI D3 and D3cold delay from ACPI 1287 * @pdev: the PCI device whose delay is to be updated 1288 * @handle: ACPI handle of this device 1289 * 1290 * Update the d3hot_delay and d3cold_delay of a PCI device from the ACPI _DSM 1291 * control method of either the device itself or the PCI host bridge. 1292 * 1293 * Function 8, "Reset Delay," applies to the entire hierarchy below a PCI 1294 * host bridge. If it returns one, the OS may assume that all devices in 1295 * the hierarchy have already completed power-on reset delays. 1296 * 1297 * Function 9, "Device Readiness Durations," applies only to the object 1298 * where it is located. It returns delay durations required after various 1299 * events if the device requires less time than the spec requires. Delays 1300 * from this function take precedence over the Reset Delay function. 1301 * 1302 * These _DSM functions are defined by the draft ECN of January 28, 2014, 1303 * titled "ACPI additions for FW latency optimizations." 1304 */ 1305 static void pci_acpi_optimize_delay(struct pci_dev *pdev, 1306 acpi_handle handle) 1307 { 1308 struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); 1309 int value; 1310 union acpi_object *obj, *elements; 1311 1312 if (bridge->ignore_reset_delay) 1313 pdev->d3cold_delay = 0; 1314 1315 obj = acpi_evaluate_dsm(handle, &pci_acpi_dsm_guid, 3, 1316 DSM_PCI_DEVICE_READINESS_DURATIONS, NULL); 1317 if (!obj) 1318 return; 1319 1320 if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 5) { 1321 elements = obj->package.elements; 1322 if (elements[0].type == ACPI_TYPE_INTEGER) { 1323 value = (int)elements[0].integer.value / 1000; 1324 if (value < PCI_PM_D3COLD_WAIT) 1325 pdev->d3cold_delay = value; 1326 } 1327 if (elements[3].type == ACPI_TYPE_INTEGER) { 1328 value = (int)elements[3].integer.value / 1000; 1329 if (value < PCI_PM_D3HOT_WAIT) 1330 pdev->d3hot_delay = value; 1331 } 1332 } 1333 ACPI_FREE(obj); 1334 } 1335 1336 static void pci_acpi_set_external_facing(struct pci_dev *dev) 1337 { 1338 u8 val; 1339 1340 if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) 1341 return; 1342 if (device_property_read_u8(&dev->dev, "ExternalFacingPort", &val)) 1343 return; 1344 1345 /* 1346 * These root ports expose PCIe (including DMA) outside of the 1347 * system. Everything downstream from them is external. 1348 */ 1349 if (val) 1350 dev->external_facing = 1; 1351 } 1352 1353 void pci_acpi_setup(struct device *dev, struct acpi_device *adev) 1354 { 1355 struct pci_dev *pci_dev = to_pci_dev(dev); 1356 1357 pci_acpi_optimize_delay(pci_dev, adev->handle); 1358 pci_acpi_set_external_facing(pci_dev); 1359 pci_acpi_add_edr_notifier(pci_dev); 1360 1361 pci_acpi_add_pm_notifier(adev, pci_dev); 1362 if (!adev->wakeup.flags.valid) 1363 return; 1364 1365 device_set_wakeup_capable(dev, true); 1366 /* 1367 * For bridges that can do D3 we enable wake automatically (as 1368 * we do for the power management itself in that case). The 1369 * reason is that the bridge may have additional methods such as 1370 * _DSW that need to be called. 1371 */ 1372 if (pci_dev->bridge_d3) 1373 device_wakeup_enable(dev); 1374 1375 acpi_pci_wakeup(pci_dev, false); 1376 acpi_device_power_add_dependent(adev, dev); 1377 } 1378 1379 void pci_acpi_cleanup(struct device *dev, struct acpi_device *adev) 1380 { 1381 struct pci_dev *pci_dev = to_pci_dev(dev); 1382 1383 pci_acpi_remove_edr_notifier(pci_dev); 1384 pci_acpi_remove_pm_notifier(adev); 1385 if (adev->wakeup.flags.valid) { 1386 acpi_device_power_remove_dependent(adev, dev); 1387 if (pci_dev->bridge_d3) 1388 device_wakeup_disable(dev); 1389 1390 device_set_wakeup_capable(dev, false); 1391 } 1392 } 1393 1394 static struct fwnode_handle *(*pci_msi_get_fwnode_cb)(struct device *dev); 1395 1396 /** 1397 * pci_msi_register_fwnode_provider - Register callback to retrieve fwnode 1398 * @fn: Callback matching a device to a fwnode that identifies a PCI 1399 * MSI domain. 1400 * 1401 * This should be called by irqchip driver, which is the parent of 1402 * the MSI domain to provide callback interface to query fwnode. 1403 */ 1404 void 1405 pci_msi_register_fwnode_provider(struct fwnode_handle *(*fn)(struct device *)) 1406 { 1407 pci_msi_get_fwnode_cb = fn; 1408 } 1409 1410 /** 1411 * pci_host_bridge_acpi_msi_domain - Retrieve MSI domain of a PCI host bridge 1412 * @bus: The PCI host bridge bus. 1413 * 1414 * This function uses the callback function registered by 1415 * pci_msi_register_fwnode_provider() to retrieve the irq_domain with 1416 * type DOMAIN_BUS_PCI_MSI of the specified host bridge bus. 1417 * This returns NULL on error or when the domain is not found. 1418 */ 1419 struct irq_domain *pci_host_bridge_acpi_msi_domain(struct pci_bus *bus) 1420 { 1421 struct fwnode_handle *fwnode; 1422 1423 if (!pci_msi_get_fwnode_cb) 1424 return NULL; 1425 1426 fwnode = pci_msi_get_fwnode_cb(&bus->dev); 1427 if (!fwnode) 1428 return NULL; 1429 1430 return irq_find_matching_fwnode(fwnode, DOMAIN_BUS_PCI_MSI); 1431 } 1432 1433 static int __init acpi_pci_init(void) 1434 { 1435 if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) { 1436 pr_info("ACPI FADT declares the system doesn't support MSI, so disable it\n"); 1437 pci_no_msi(); 1438 } 1439 1440 if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { 1441 pr_info("ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n"); 1442 pcie_no_aspm(); 1443 } 1444 1445 if (acpi_pci_disabled) 1446 return 0; 1447 1448 acpi_pci_slot_init(); 1449 acpiphp_init(); 1450 1451 return 0; 1452 } 1453 arch_initcall(acpi_pci_init); 1454