1 /* 2 * Standard PCI Hot Plug Driver 3 * 4 * Copyright (C) 1995,2001 Compaq Computer Corporation 5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) 6 * Copyright (C) 2001 IBM Corp. 7 * Copyright (C) 2003-2004 Intel Corporation 8 * 9 * All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or (at 14 * your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 19 * NON INFRINGEMENT. See the GNU General Public License for more 20 * details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com> 27 * 28 */ 29 30 #include <linux/kernel.h> 31 #include <linux/module.h> 32 #include <linux/types.h> 33 #include <linux/pci.h> 34 #include <linux/interrupt.h> 35 36 #include "shpchp.h" 37 38 /* Slot Available Register I field definition */ 39 #define SLOT_33MHZ 0x0000001f 40 #define SLOT_66MHZ_PCIX 0x00001f00 41 #define SLOT_100MHZ_PCIX 0x001f0000 42 #define SLOT_133MHZ_PCIX 0x1f000000 43 44 /* Slot Available Register II field definition */ 45 #define SLOT_66MHZ 0x0000001f 46 #define SLOT_66MHZ_PCIX_266 0x00000f00 47 #define SLOT_100MHZ_PCIX_266 0x0000f000 48 #define SLOT_133MHZ_PCIX_266 0x000f0000 49 #define SLOT_66MHZ_PCIX_533 0x00f00000 50 #define SLOT_100MHZ_PCIX_533 0x0f000000 51 #define SLOT_133MHZ_PCIX_533 0xf0000000 52 53 /* Slot Configuration */ 54 #define SLOT_NUM 0x0000001F 55 #define FIRST_DEV_NUM 0x00001F00 56 #define PSN 0x07FF0000 57 #define UPDOWN 0x20000000 58 #define MRLSENSOR 0x40000000 59 #define ATTN_BUTTON 0x80000000 60 61 /* 62 * Interrupt Locator Register definitions 63 */ 64 #define CMD_INTR_PENDING (1 << 0) 65 #define SLOT_INTR_PENDING(i) (1 << (i + 1)) 66 67 /* 68 * Controller SERR-INT Register 69 */ 70 #define GLOBAL_INTR_MASK (1 << 0) 71 #define GLOBAL_SERR_MASK (1 << 1) 72 #define COMMAND_INTR_MASK (1 << 2) 73 #define ARBITER_SERR_MASK (1 << 3) 74 #define COMMAND_DETECTED (1 << 16) 75 #define ARBITER_DETECTED (1 << 17) 76 #define SERR_INTR_RSVDZ_MASK 0xfffc0000 77 78 /* 79 * Logical Slot Register definitions 80 */ 81 #define SLOT_REG(i) (SLOT1 + (4 * i)) 82 83 #define SLOT_STATE_SHIFT (0) 84 #define SLOT_STATE_MASK (3 << 0) 85 #define SLOT_STATE_PWRONLY (1) 86 #define SLOT_STATE_ENABLED (2) 87 #define SLOT_STATE_DISABLED (3) 88 #define PWR_LED_STATE_SHIFT (2) 89 #define PWR_LED_STATE_MASK (3 << 2) 90 #define ATN_LED_STATE_SHIFT (4) 91 #define ATN_LED_STATE_MASK (3 << 4) 92 #define ATN_LED_STATE_ON (1) 93 #define ATN_LED_STATE_BLINK (2) 94 #define ATN_LED_STATE_OFF (3) 95 #define POWER_FAULT (1 << 6) 96 #define ATN_BUTTON (1 << 7) 97 #define MRL_SENSOR (1 << 8) 98 #define MHZ66_CAP (1 << 9) 99 #define PRSNT_SHIFT (10) 100 #define PRSNT_MASK (3 << 10) 101 #define PCIX_CAP_SHIFT (12) 102 #define PCIX_CAP_MASK_PI1 (3 << 12) 103 #define PCIX_CAP_MASK_PI2 (7 << 12) 104 #define PRSNT_CHANGE_DETECTED (1 << 16) 105 #define ISO_PFAULT_DETECTED (1 << 17) 106 #define BUTTON_PRESS_DETECTED (1 << 18) 107 #define MRL_CHANGE_DETECTED (1 << 19) 108 #define CON_PFAULT_DETECTED (1 << 20) 109 #define PRSNT_CHANGE_INTR_MASK (1 << 24) 110 #define ISO_PFAULT_INTR_MASK (1 << 25) 111 #define BUTTON_PRESS_INTR_MASK (1 << 26) 112 #define MRL_CHANGE_INTR_MASK (1 << 27) 113 #define CON_PFAULT_INTR_MASK (1 << 28) 114 #define MRL_CHANGE_SERR_MASK (1 << 29) 115 #define CON_PFAULT_SERR_MASK (1 << 30) 116 #define SLOT_REG_RSVDZ_MASK ((1 << 15) | (7 << 21)) 117 118 /* 119 * SHPC Command Code definitions 120 * 121 * Slot Operation 00h - 3Fh 122 * Set Bus Segment Speed/Mode A 40h - 47h 123 * Power-Only All Slots 48h 124 * Enable All Slots 49h 125 * Set Bus Segment Speed/Mode B (PI=2) 50h - 5Fh 126 * Reserved Command Codes 60h - BFh 127 * Vendor Specific Commands C0h - FFh 128 */ 129 #define SET_SLOT_PWR 0x01 /* Slot Operation */ 130 #define SET_SLOT_ENABLE 0x02 131 #define SET_SLOT_DISABLE 0x03 132 #define SET_PWR_ON 0x04 133 #define SET_PWR_BLINK 0x08 134 #define SET_PWR_OFF 0x0c 135 #define SET_ATTN_ON 0x10 136 #define SET_ATTN_BLINK 0x20 137 #define SET_ATTN_OFF 0x30 138 #define SETA_PCI_33MHZ 0x40 /* Set Bus Segment Speed/Mode A */ 139 #define SETA_PCI_66MHZ 0x41 140 #define SETA_PCIX_66MHZ 0x42 141 #define SETA_PCIX_100MHZ 0x43 142 #define SETA_PCIX_133MHZ 0x44 143 #define SETA_RESERVED1 0x45 144 #define SETA_RESERVED2 0x46 145 #define SETA_RESERVED3 0x47 146 #define SET_PWR_ONLY_ALL 0x48 /* Power-Only All Slots */ 147 #define SET_ENABLE_ALL 0x49 /* Enable All Slots */ 148 #define SETB_PCI_33MHZ 0x50 /* Set Bus Segment Speed/Mode B */ 149 #define SETB_PCI_66MHZ 0x51 150 #define SETB_PCIX_66MHZ_PM 0x52 151 #define SETB_PCIX_100MHZ_PM 0x53 152 #define SETB_PCIX_133MHZ_PM 0x54 153 #define SETB_PCIX_66MHZ_EM 0x55 154 #define SETB_PCIX_100MHZ_EM 0x56 155 #define SETB_PCIX_133MHZ_EM 0x57 156 #define SETB_PCIX_66MHZ_266 0x58 157 #define SETB_PCIX_100MHZ_266 0x59 158 #define SETB_PCIX_133MHZ_266 0x5a 159 #define SETB_PCIX_66MHZ_533 0x5b 160 #define SETB_PCIX_100MHZ_533 0x5c 161 #define SETB_PCIX_133MHZ_533 0x5d 162 #define SETB_RESERVED1 0x5e 163 #define SETB_RESERVED2 0x5f 164 165 /* 166 * SHPC controller command error code 167 */ 168 #define SWITCH_OPEN 0x1 169 #define INVALID_CMD 0x2 170 #define INVALID_SPEED_MODE 0x4 171 172 /* 173 * For accessing SHPC Working Register Set via PCI Configuration Space 174 */ 175 #define DWORD_SELECT 0x2 176 #define DWORD_DATA 0x4 177 178 /* Field Offset in Logical Slot Register - byte boundary */ 179 #define SLOT_EVENT_LATCH 0x2 180 #define SLOT_SERR_INT_MASK 0x3 181 182 static irqreturn_t shpc_isr(int irq, void *dev_id); 183 static void start_int_poll_timer(struct controller *ctrl, int sec); 184 static int hpc_check_cmd_status(struct controller *ctrl); 185 186 static inline u8 shpc_readb(struct controller *ctrl, int reg) 187 { 188 return readb(ctrl->creg + reg); 189 } 190 191 static inline void shpc_writeb(struct controller *ctrl, int reg, u8 val) 192 { 193 writeb(val, ctrl->creg + reg); 194 } 195 196 static inline u16 shpc_readw(struct controller *ctrl, int reg) 197 { 198 return readw(ctrl->creg + reg); 199 } 200 201 static inline void shpc_writew(struct controller *ctrl, int reg, u16 val) 202 { 203 writew(val, ctrl->creg + reg); 204 } 205 206 static inline u32 shpc_readl(struct controller *ctrl, int reg) 207 { 208 return readl(ctrl->creg + reg); 209 } 210 211 static inline void shpc_writel(struct controller *ctrl, int reg, u32 val) 212 { 213 writel(val, ctrl->creg + reg); 214 } 215 216 static inline int shpc_indirect_read(struct controller *ctrl, int index, 217 u32 *value) 218 { 219 int rc; 220 u32 cap_offset = ctrl->cap_offset; 221 struct pci_dev *pdev = ctrl->pci_dev; 222 223 rc = pci_write_config_byte(pdev, cap_offset + DWORD_SELECT, index); 224 if (rc) 225 return rc; 226 return pci_read_config_dword(pdev, cap_offset + DWORD_DATA, value); 227 } 228 229 /* 230 * This is the interrupt polling timeout function. 231 */ 232 static void int_poll_timeout(unsigned long data) 233 { 234 struct controller *ctrl = (struct controller *)data; 235 236 /* Poll for interrupt events. regs == NULL => polling */ 237 shpc_isr(0, ctrl); 238 239 init_timer(&ctrl->poll_timer); 240 if (!shpchp_poll_time) 241 shpchp_poll_time = 2; /* default polling interval is 2 sec */ 242 243 start_int_poll_timer(ctrl, shpchp_poll_time); 244 } 245 246 /* 247 * This function starts the interrupt polling timer. 248 */ 249 static void start_int_poll_timer(struct controller *ctrl, int sec) 250 { 251 /* Clamp to sane value */ 252 if ((sec <= 0) || (sec > 60)) 253 sec = 2; 254 255 ctrl->poll_timer.function = &int_poll_timeout; 256 ctrl->poll_timer.data = (unsigned long)ctrl; 257 ctrl->poll_timer.expires = jiffies + sec * HZ; 258 add_timer(&ctrl->poll_timer); 259 } 260 261 static inline int is_ctrl_busy(struct controller *ctrl) 262 { 263 u16 cmd_status = shpc_readw(ctrl, CMD_STATUS); 264 return cmd_status & 0x1; 265 } 266 267 /* 268 * Returns 1 if SHPC finishes executing a command within 1 sec, 269 * otherwise returns 0. 270 */ 271 static inline int shpc_poll_ctrl_busy(struct controller *ctrl) 272 { 273 int i; 274 275 if (!is_ctrl_busy(ctrl)) 276 return 1; 277 278 /* Check every 0.1 sec for a total of 1 sec */ 279 for (i = 0; i < 10; i++) { 280 msleep(100); 281 if (!is_ctrl_busy(ctrl)) 282 return 1; 283 } 284 285 return 0; 286 } 287 288 static inline int shpc_wait_cmd(struct controller *ctrl) 289 { 290 int retval = 0; 291 unsigned long timeout = msecs_to_jiffies(1000); 292 int rc; 293 294 if (shpchp_poll_mode) 295 rc = shpc_poll_ctrl_busy(ctrl); 296 else 297 rc = wait_event_interruptible_timeout(ctrl->queue, 298 !is_ctrl_busy(ctrl), timeout); 299 if (!rc && is_ctrl_busy(ctrl)) { 300 retval = -EIO; 301 ctrl_err(ctrl, "Command not completed in 1000 msec\n"); 302 } else if (rc < 0) { 303 retval = -EINTR; 304 ctrl_info(ctrl, "Command was interrupted by a signal\n"); 305 } 306 307 return retval; 308 } 309 310 static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd) 311 { 312 struct controller *ctrl = slot->ctrl; 313 u16 cmd_status; 314 int retval = 0; 315 u16 temp_word; 316 317 mutex_lock(&slot->ctrl->cmd_lock); 318 319 if (!shpc_poll_ctrl_busy(ctrl)) { 320 /* After 1 sec and and the controller is still busy */ 321 ctrl_err(ctrl, "Controller is still busy after 1 sec\n"); 322 retval = -EBUSY; 323 goto out; 324 } 325 326 ++t_slot; 327 temp_word = (t_slot << 8) | (cmd & 0xFF); 328 ctrl_dbg(ctrl, "%s: t_slot %x cmd %x\n", __func__, t_slot, cmd); 329 330 /* To make sure the Controller Busy bit is 0 before we send out the 331 * command. 332 */ 333 shpc_writew(ctrl, CMD, temp_word); 334 335 /* 336 * Wait for command completion. 337 */ 338 retval = shpc_wait_cmd(slot->ctrl); 339 if (retval) 340 goto out; 341 342 cmd_status = hpc_check_cmd_status(slot->ctrl); 343 if (cmd_status) { 344 ctrl_err(ctrl, "Failed to issued command 0x%x (error code = %d)\n", 345 cmd, cmd_status); 346 retval = -EIO; 347 } 348 out: 349 mutex_unlock(&slot->ctrl->cmd_lock); 350 return retval; 351 } 352 353 static int hpc_check_cmd_status(struct controller *ctrl) 354 { 355 int retval = 0; 356 u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F; 357 358 switch (cmd_status >> 1) { 359 case 0: 360 retval = 0; 361 break; 362 case 1: 363 retval = SWITCH_OPEN; 364 ctrl_err(ctrl, "Switch opened!\n"); 365 break; 366 case 2: 367 retval = INVALID_CMD; 368 ctrl_err(ctrl, "Invalid HPC command!\n"); 369 break; 370 case 4: 371 retval = INVALID_SPEED_MODE; 372 ctrl_err(ctrl, "Invalid bus speed/mode!\n"); 373 break; 374 default: 375 retval = cmd_status; 376 } 377 378 return retval; 379 } 380 381 382 static int hpc_get_attention_status(struct slot *slot, u8 *status) 383 { 384 struct controller *ctrl = slot->ctrl; 385 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 386 u8 state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT; 387 388 switch (state) { 389 case ATN_LED_STATE_ON: 390 *status = 1; /* On */ 391 break; 392 case ATN_LED_STATE_BLINK: 393 *status = 2; /* Blink */ 394 break; 395 case ATN_LED_STATE_OFF: 396 *status = 0; /* Off */ 397 break; 398 default: 399 *status = 0xFF; /* Reserved */ 400 break; 401 } 402 403 return 0; 404 } 405 406 static int hpc_get_power_status(struct slot *slot, u8 *status) 407 { 408 struct controller *ctrl = slot->ctrl; 409 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 410 u8 state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT; 411 412 switch (state) { 413 case SLOT_STATE_PWRONLY: 414 *status = 2; /* Powered only */ 415 break; 416 case SLOT_STATE_ENABLED: 417 *status = 1; /* Enabled */ 418 break; 419 case SLOT_STATE_DISABLED: 420 *status = 0; /* Disabled */ 421 break; 422 default: 423 *status = 0xFF; /* Reserved */ 424 break; 425 } 426 427 return 0; 428 } 429 430 431 static int hpc_get_latch_status(struct slot *slot, u8 *status) 432 { 433 struct controller *ctrl = slot->ctrl; 434 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 435 436 *status = !!(slot_reg & MRL_SENSOR); /* 0 -> close; 1 -> open */ 437 438 return 0; 439 } 440 441 static int hpc_get_adapter_status(struct slot *slot, u8 *status) 442 { 443 struct controller *ctrl = slot->ctrl; 444 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 445 u8 state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT; 446 447 *status = (state != 0x3) ? 1 : 0; 448 449 return 0; 450 } 451 452 static int hpc_get_prog_int(struct slot *slot, u8 *prog_int) 453 { 454 struct controller *ctrl = slot->ctrl; 455 456 *prog_int = shpc_readb(ctrl, PROG_INTERFACE); 457 458 return 0; 459 } 460 461 static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value) 462 { 463 int retval = 0; 464 struct controller *ctrl = slot->ctrl; 465 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 466 u8 m66_cap = !!(slot_reg & MHZ66_CAP); 467 u8 pi, pcix_cap; 468 469 retval = hpc_get_prog_int(slot, &pi); 470 if (retval) 471 return retval; 472 473 switch (pi) { 474 case 1: 475 pcix_cap = (slot_reg & PCIX_CAP_MASK_PI1) >> PCIX_CAP_SHIFT; 476 break; 477 case 2: 478 pcix_cap = (slot_reg & PCIX_CAP_MASK_PI2) >> PCIX_CAP_SHIFT; 479 break; 480 default: 481 return -ENODEV; 482 } 483 484 ctrl_dbg(ctrl, "%s: slot_reg = %x, pcix_cap = %x, m66_cap = %x\n", 485 __func__, slot_reg, pcix_cap, m66_cap); 486 487 switch (pcix_cap) { 488 case 0x0: 489 *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz; 490 break; 491 case 0x1: 492 *value = PCI_SPEED_66MHz_PCIX; 493 break; 494 case 0x3: 495 *value = PCI_SPEED_133MHz_PCIX; 496 break; 497 case 0x4: 498 *value = PCI_SPEED_133MHz_PCIX_266; 499 break; 500 case 0x5: 501 *value = PCI_SPEED_133MHz_PCIX_533; 502 break; 503 case 0x2: 504 default: 505 *value = PCI_SPEED_UNKNOWN; 506 retval = -ENODEV; 507 break; 508 } 509 510 ctrl_dbg(ctrl, "Adapter speed = %d\n", *value); 511 return retval; 512 } 513 514 static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode) 515 { 516 int retval = 0; 517 struct controller *ctrl = slot->ctrl; 518 u16 sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG); 519 u8 pi = shpc_readb(ctrl, PROG_INTERFACE); 520 521 if (pi == 2) { 522 *mode = (sec_bus_status & 0x0100) >> 8; 523 } else { 524 retval = -1; 525 } 526 527 ctrl_dbg(ctrl, "Mode 1 ECC cap = %d\n", *mode); 528 return retval; 529 } 530 531 static int hpc_query_power_fault(struct slot *slot) 532 { 533 struct controller *ctrl = slot->ctrl; 534 u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot)); 535 536 /* Note: Logic 0 => fault */ 537 return !(slot_reg & POWER_FAULT); 538 } 539 540 static int hpc_set_attention_status(struct slot *slot, u8 value) 541 { 542 u8 slot_cmd = 0; 543 544 switch (value) { 545 case 0: 546 slot_cmd = SET_ATTN_OFF; /* OFF */ 547 break; 548 case 1: 549 slot_cmd = SET_ATTN_ON; /* ON */ 550 break; 551 case 2: 552 slot_cmd = SET_ATTN_BLINK; /* BLINK */ 553 break; 554 default: 555 return -1; 556 } 557 558 return shpc_write_cmd(slot, slot->hp_slot, slot_cmd); 559 } 560 561 562 static void hpc_set_green_led_on(struct slot *slot) 563 { 564 shpc_write_cmd(slot, slot->hp_slot, SET_PWR_ON); 565 } 566 567 static void hpc_set_green_led_off(struct slot *slot) 568 { 569 shpc_write_cmd(slot, slot->hp_slot, SET_PWR_OFF); 570 } 571 572 static void hpc_set_green_led_blink(struct slot *slot) 573 { 574 shpc_write_cmd(slot, slot->hp_slot, SET_PWR_BLINK); 575 } 576 577 static void hpc_release_ctlr(struct controller *ctrl) 578 { 579 int i; 580 u32 slot_reg, serr_int; 581 582 /* 583 * Mask event interrupts and SERRs of all slots 584 */ 585 for (i = 0; i < ctrl->num_slots; i++) { 586 slot_reg = shpc_readl(ctrl, SLOT_REG(i)); 587 slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | 588 BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | 589 CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | 590 CON_PFAULT_SERR_MASK); 591 slot_reg &= ~SLOT_REG_RSVDZ_MASK; 592 shpc_writel(ctrl, SLOT_REG(i), slot_reg); 593 } 594 595 cleanup_slots(ctrl); 596 597 /* 598 * Mask SERR and System Interrupt generation 599 */ 600 serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); 601 serr_int |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | 602 COMMAND_INTR_MASK | ARBITER_SERR_MASK); 603 serr_int &= ~SERR_INTR_RSVDZ_MASK; 604 shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); 605 606 if (shpchp_poll_mode) 607 del_timer(&ctrl->poll_timer); 608 else { 609 free_irq(ctrl->pci_dev->irq, ctrl); 610 pci_disable_msi(ctrl->pci_dev); 611 } 612 613 iounmap(ctrl->creg); 614 release_mem_region(ctrl->mmio_base, ctrl->mmio_size); 615 } 616 617 static int hpc_power_on_slot(struct slot *slot) 618 { 619 int retval; 620 621 retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR); 622 if (retval) 623 ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); 624 625 return retval; 626 } 627 628 static int hpc_slot_enable(struct slot *slot) 629 { 630 int retval; 631 632 /* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */ 633 retval = shpc_write_cmd(slot, slot->hp_slot, 634 SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF); 635 if (retval) 636 ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); 637 638 return retval; 639 } 640 641 static int hpc_slot_disable(struct slot *slot) 642 { 643 int retval; 644 645 /* Slot - Disable, Power Indicator - Off, Attention Indicator - On */ 646 retval = shpc_write_cmd(slot, slot->hp_slot, 647 SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON); 648 if (retval) 649 ctrl_err(slot->ctrl, "%s: Write command failed!\n", __func__); 650 651 return retval; 652 } 653 654 static int shpc_get_cur_bus_speed(struct controller *ctrl) 655 { 656 int retval = 0; 657 struct pci_bus *bus = ctrl->pci_dev->subordinate; 658 enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; 659 u16 sec_bus_reg = shpc_readw(ctrl, SEC_BUS_CONFIG); 660 u8 pi = shpc_readb(ctrl, PROG_INTERFACE); 661 u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7); 662 663 if ((pi == 1) && (speed_mode > 4)) { 664 retval = -ENODEV; 665 goto out; 666 } 667 668 switch (speed_mode) { 669 case 0x0: 670 bus_speed = PCI_SPEED_33MHz; 671 break; 672 case 0x1: 673 bus_speed = PCI_SPEED_66MHz; 674 break; 675 case 0x2: 676 bus_speed = PCI_SPEED_66MHz_PCIX; 677 break; 678 case 0x3: 679 bus_speed = PCI_SPEED_100MHz_PCIX; 680 break; 681 case 0x4: 682 bus_speed = PCI_SPEED_133MHz_PCIX; 683 break; 684 case 0x5: 685 bus_speed = PCI_SPEED_66MHz_PCIX_ECC; 686 break; 687 case 0x6: 688 bus_speed = PCI_SPEED_100MHz_PCIX_ECC; 689 break; 690 case 0x7: 691 bus_speed = PCI_SPEED_133MHz_PCIX_ECC; 692 break; 693 case 0x8: 694 bus_speed = PCI_SPEED_66MHz_PCIX_266; 695 break; 696 case 0x9: 697 bus_speed = PCI_SPEED_100MHz_PCIX_266; 698 break; 699 case 0xa: 700 bus_speed = PCI_SPEED_133MHz_PCIX_266; 701 break; 702 case 0xb: 703 bus_speed = PCI_SPEED_66MHz_PCIX_533; 704 break; 705 case 0xc: 706 bus_speed = PCI_SPEED_100MHz_PCIX_533; 707 break; 708 case 0xd: 709 bus_speed = PCI_SPEED_133MHz_PCIX_533; 710 break; 711 default: 712 retval = -ENODEV; 713 break; 714 } 715 716 out: 717 bus->cur_bus_speed = bus_speed; 718 dbg("Current bus speed = %d\n", bus_speed); 719 return retval; 720 } 721 722 723 static int hpc_set_bus_speed_mode(struct slot *slot, enum pci_bus_speed value) 724 { 725 int retval; 726 struct controller *ctrl = slot->ctrl; 727 u8 pi, cmd; 728 729 pi = shpc_readb(ctrl, PROG_INTERFACE); 730 if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX)) 731 return -EINVAL; 732 733 switch (value) { 734 case PCI_SPEED_33MHz: 735 cmd = SETA_PCI_33MHZ; 736 break; 737 case PCI_SPEED_66MHz: 738 cmd = SETA_PCI_66MHZ; 739 break; 740 case PCI_SPEED_66MHz_PCIX: 741 cmd = SETA_PCIX_66MHZ; 742 break; 743 case PCI_SPEED_100MHz_PCIX: 744 cmd = SETA_PCIX_100MHZ; 745 break; 746 case PCI_SPEED_133MHz_PCIX: 747 cmd = SETA_PCIX_133MHZ; 748 break; 749 case PCI_SPEED_66MHz_PCIX_ECC: 750 cmd = SETB_PCIX_66MHZ_EM; 751 break; 752 case PCI_SPEED_100MHz_PCIX_ECC: 753 cmd = SETB_PCIX_100MHZ_EM; 754 break; 755 case PCI_SPEED_133MHz_PCIX_ECC: 756 cmd = SETB_PCIX_133MHZ_EM; 757 break; 758 case PCI_SPEED_66MHz_PCIX_266: 759 cmd = SETB_PCIX_66MHZ_266; 760 break; 761 case PCI_SPEED_100MHz_PCIX_266: 762 cmd = SETB_PCIX_100MHZ_266; 763 break; 764 case PCI_SPEED_133MHz_PCIX_266: 765 cmd = SETB_PCIX_133MHZ_266; 766 break; 767 case PCI_SPEED_66MHz_PCIX_533: 768 cmd = SETB_PCIX_66MHZ_533; 769 break; 770 case PCI_SPEED_100MHz_PCIX_533: 771 cmd = SETB_PCIX_100MHZ_533; 772 break; 773 case PCI_SPEED_133MHz_PCIX_533: 774 cmd = SETB_PCIX_133MHZ_533; 775 break; 776 default: 777 return -EINVAL; 778 } 779 780 retval = shpc_write_cmd(slot, 0, cmd); 781 if (retval) 782 ctrl_err(ctrl, "%s: Write command failed!\n", __func__); 783 else 784 shpc_get_cur_bus_speed(ctrl); 785 786 return retval; 787 } 788 789 static irqreturn_t shpc_isr(int irq, void *dev_id) 790 { 791 struct controller *ctrl = (struct controller *)dev_id; 792 u32 serr_int, slot_reg, intr_loc, intr_loc2; 793 int hp_slot; 794 795 /* Check to see if it was our interrupt */ 796 intr_loc = shpc_readl(ctrl, INTR_LOC); 797 if (!intr_loc) 798 return IRQ_NONE; 799 800 ctrl_dbg(ctrl, "%s: intr_loc = %x\n", __func__, intr_loc); 801 802 if (!shpchp_poll_mode) { 803 /* 804 * Mask Global Interrupt Mask - see implementation 805 * note on p. 139 of SHPC spec rev 1.0 806 */ 807 serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); 808 serr_int |= GLOBAL_INTR_MASK; 809 serr_int &= ~SERR_INTR_RSVDZ_MASK; 810 shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); 811 812 intr_loc2 = shpc_readl(ctrl, INTR_LOC); 813 ctrl_dbg(ctrl, "%s: intr_loc2 = %x\n", __func__, intr_loc2); 814 } 815 816 if (intr_loc & CMD_INTR_PENDING) { 817 /* 818 * Command Complete Interrupt Pending 819 * RO only - clear by writing 1 to the Command Completion 820 * Detect bit in Controller SERR-INT register 821 */ 822 serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); 823 serr_int &= ~SERR_INTR_RSVDZ_MASK; 824 shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); 825 826 wake_up_interruptible(&ctrl->queue); 827 } 828 829 if (!(intr_loc & ~CMD_INTR_PENDING)) 830 goto out; 831 832 for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { 833 /* To find out which slot has interrupt pending */ 834 if (!(intr_loc & SLOT_INTR_PENDING(hp_slot))) 835 continue; 836 837 slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); 838 ctrl_dbg(ctrl, "Slot %x with intr, slot register = %x\n", 839 hp_slot, slot_reg); 840 841 if (slot_reg & MRL_CHANGE_DETECTED) 842 shpchp_handle_switch_change(hp_slot, ctrl); 843 844 if (slot_reg & BUTTON_PRESS_DETECTED) 845 shpchp_handle_attention_button(hp_slot, ctrl); 846 847 if (slot_reg & PRSNT_CHANGE_DETECTED) 848 shpchp_handle_presence_change(hp_slot, ctrl); 849 850 if (slot_reg & (ISO_PFAULT_DETECTED | CON_PFAULT_DETECTED)) 851 shpchp_handle_power_fault(hp_slot, ctrl); 852 853 /* Clear all slot events */ 854 slot_reg &= ~SLOT_REG_RSVDZ_MASK; 855 shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); 856 } 857 out: 858 if (!shpchp_poll_mode) { 859 /* Unmask Global Interrupt Mask */ 860 serr_int = shpc_readl(ctrl, SERR_INTR_ENABLE); 861 serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK); 862 shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int); 863 } 864 865 return IRQ_HANDLED; 866 } 867 868 static int shpc_get_max_bus_speed(struct controller *ctrl) 869 { 870 int retval = 0; 871 struct pci_bus *bus = ctrl->pci_dev->subordinate; 872 enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN; 873 u8 pi = shpc_readb(ctrl, PROG_INTERFACE); 874 u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1); 875 u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2); 876 877 if (pi == 2) { 878 if (slot_avail2 & SLOT_133MHZ_PCIX_533) 879 bus_speed = PCI_SPEED_133MHz_PCIX_533; 880 else if (slot_avail2 & SLOT_100MHZ_PCIX_533) 881 bus_speed = PCI_SPEED_100MHz_PCIX_533; 882 else if (slot_avail2 & SLOT_66MHZ_PCIX_533) 883 bus_speed = PCI_SPEED_66MHz_PCIX_533; 884 else if (slot_avail2 & SLOT_133MHZ_PCIX_266) 885 bus_speed = PCI_SPEED_133MHz_PCIX_266; 886 else if (slot_avail2 & SLOT_100MHZ_PCIX_266) 887 bus_speed = PCI_SPEED_100MHz_PCIX_266; 888 else if (slot_avail2 & SLOT_66MHZ_PCIX_266) 889 bus_speed = PCI_SPEED_66MHz_PCIX_266; 890 } 891 892 if (bus_speed == PCI_SPEED_UNKNOWN) { 893 if (slot_avail1 & SLOT_133MHZ_PCIX) 894 bus_speed = PCI_SPEED_133MHz_PCIX; 895 else if (slot_avail1 & SLOT_100MHZ_PCIX) 896 bus_speed = PCI_SPEED_100MHz_PCIX; 897 else if (slot_avail1 & SLOT_66MHZ_PCIX) 898 bus_speed = PCI_SPEED_66MHz_PCIX; 899 else if (slot_avail2 & SLOT_66MHZ) 900 bus_speed = PCI_SPEED_66MHz; 901 else if (slot_avail1 & SLOT_33MHZ) 902 bus_speed = PCI_SPEED_33MHz; 903 else 904 retval = -ENODEV; 905 } 906 907 bus->max_bus_speed = bus_speed; 908 ctrl_dbg(ctrl, "Max bus speed = %d\n", bus_speed); 909 910 return retval; 911 } 912 913 static const struct hpc_ops shpchp_hpc_ops = { 914 .power_on_slot = hpc_power_on_slot, 915 .slot_enable = hpc_slot_enable, 916 .slot_disable = hpc_slot_disable, 917 .set_bus_speed_mode = hpc_set_bus_speed_mode, 918 .set_attention_status = hpc_set_attention_status, 919 .get_power_status = hpc_get_power_status, 920 .get_attention_status = hpc_get_attention_status, 921 .get_latch_status = hpc_get_latch_status, 922 .get_adapter_status = hpc_get_adapter_status, 923 924 .get_adapter_speed = hpc_get_adapter_speed, 925 .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap, 926 .get_prog_int = hpc_get_prog_int, 927 928 .query_power_fault = hpc_query_power_fault, 929 .green_led_on = hpc_set_green_led_on, 930 .green_led_off = hpc_set_green_led_off, 931 .green_led_blink = hpc_set_green_led_blink, 932 933 .release_ctlr = hpc_release_ctlr, 934 }; 935 936 int shpc_init(struct controller *ctrl, struct pci_dev *pdev) 937 { 938 int rc = -1, num_slots = 0; 939 u8 hp_slot; 940 u32 shpc_base_offset; 941 u32 tempdword, slot_reg, slot_config; 942 u8 i; 943 944 ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */ 945 ctrl_dbg(ctrl, "Hotplug Controller:\n"); 946 947 if (pdev->vendor == PCI_VENDOR_ID_AMD && 948 pdev->device == PCI_DEVICE_ID_AMD_GOLAM_7450) { 949 /* amd shpc driver doesn't use Base Offset; assume 0 */ 950 ctrl->mmio_base = pci_resource_start(pdev, 0); 951 ctrl->mmio_size = pci_resource_len(pdev, 0); 952 } else { 953 ctrl->cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC); 954 if (!ctrl->cap_offset) { 955 ctrl_err(ctrl, "Cannot find PCI capability\n"); 956 goto abort; 957 } 958 ctrl_dbg(ctrl, " cap_offset = %x\n", ctrl->cap_offset); 959 960 rc = shpc_indirect_read(ctrl, 0, &shpc_base_offset); 961 if (rc) { 962 ctrl_err(ctrl, "Cannot read base_offset\n"); 963 goto abort; 964 } 965 966 rc = shpc_indirect_read(ctrl, 3, &tempdword); 967 if (rc) { 968 ctrl_err(ctrl, "Cannot read slot config\n"); 969 goto abort; 970 } 971 num_slots = tempdword & SLOT_NUM; 972 ctrl_dbg(ctrl, " num_slots (indirect) %x\n", num_slots); 973 974 for (i = 0; i < 9 + num_slots; i++) { 975 rc = shpc_indirect_read(ctrl, i, &tempdword); 976 if (rc) { 977 ctrl_err(ctrl, "Cannot read creg (index = %d)\n", 978 i); 979 goto abort; 980 } 981 ctrl_dbg(ctrl, " offset %d: value %x\n", i, tempdword); 982 } 983 984 ctrl->mmio_base = 985 pci_resource_start(pdev, 0) + shpc_base_offset; 986 ctrl->mmio_size = 0x24 + 0x4 * num_slots; 987 } 988 989 ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", 990 pdev->vendor, pdev->device, pdev->subsystem_vendor, 991 pdev->subsystem_device); 992 993 rc = pci_enable_device(pdev); 994 if (rc) { 995 ctrl_err(ctrl, "pci_enable_device failed\n"); 996 goto abort; 997 } 998 999 if (!request_mem_region(ctrl->mmio_base, ctrl->mmio_size, MY_NAME)) { 1000 ctrl_err(ctrl, "Cannot reserve MMIO region\n"); 1001 rc = -1; 1002 goto abort; 1003 } 1004 1005 ctrl->creg = ioremap(ctrl->mmio_base, ctrl->mmio_size); 1006 if (!ctrl->creg) { 1007 ctrl_err(ctrl, "Cannot remap MMIO region %lx @ %lx\n", 1008 ctrl->mmio_size, ctrl->mmio_base); 1009 release_mem_region(ctrl->mmio_base, ctrl->mmio_size); 1010 rc = -1; 1011 goto abort; 1012 } 1013 ctrl_dbg(ctrl, "ctrl->creg %p\n", ctrl->creg); 1014 1015 mutex_init(&ctrl->crit_sect); 1016 mutex_init(&ctrl->cmd_lock); 1017 1018 /* Setup wait queue */ 1019 init_waitqueue_head(&ctrl->queue); 1020 1021 ctrl->hpc_ops = &shpchp_hpc_ops; 1022 1023 /* Return PCI Controller Info */ 1024 slot_config = shpc_readl(ctrl, SLOT_CONFIG); 1025 ctrl->slot_device_offset = (slot_config & FIRST_DEV_NUM) >> 8; 1026 ctrl->num_slots = slot_config & SLOT_NUM; 1027 ctrl->first_slot = (slot_config & PSN) >> 16; 1028 ctrl->slot_num_inc = ((slot_config & UPDOWN) >> 29) ? 1 : -1; 1029 1030 /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */ 1031 tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); 1032 ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); 1033 tempdword |= (GLOBAL_INTR_MASK | GLOBAL_SERR_MASK | 1034 COMMAND_INTR_MASK | ARBITER_SERR_MASK); 1035 tempdword &= ~SERR_INTR_RSVDZ_MASK; 1036 shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); 1037 tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); 1038 ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); 1039 1040 /* Mask the MRL sensor SERR Mask of individual slot in 1041 * Slot SERR-INT Mask & clear all the existing event if any 1042 */ 1043 for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { 1044 slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); 1045 ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", 1046 hp_slot, slot_reg); 1047 slot_reg |= (PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | 1048 BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | 1049 CON_PFAULT_INTR_MASK | MRL_CHANGE_SERR_MASK | 1050 CON_PFAULT_SERR_MASK); 1051 slot_reg &= ~SLOT_REG_RSVDZ_MASK; 1052 shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); 1053 } 1054 1055 if (shpchp_poll_mode) { 1056 /* Install interrupt polling timer. Start with 10 sec delay */ 1057 init_timer(&ctrl->poll_timer); 1058 start_int_poll_timer(ctrl, 10); 1059 } else { 1060 /* Installs the interrupt handler */ 1061 rc = pci_enable_msi(pdev); 1062 if (rc) { 1063 ctrl_info(ctrl, "Can't get msi for the hotplug controller\n"); 1064 ctrl_info(ctrl, "Use INTx for the hotplug controller\n"); 1065 } else { 1066 pci_set_master(pdev); 1067 } 1068 1069 rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED, 1070 MY_NAME, (void *)ctrl); 1071 ctrl_dbg(ctrl, "request_irq %d (returns %d)\n", 1072 ctrl->pci_dev->irq, rc); 1073 if (rc) { 1074 ctrl_err(ctrl, "Can't get irq %d for the hotplug controller\n", 1075 ctrl->pci_dev->irq); 1076 goto abort_iounmap; 1077 } 1078 } 1079 ctrl_dbg(ctrl, "HPC at %s irq=%x\n", pci_name(pdev), pdev->irq); 1080 1081 shpc_get_max_bus_speed(ctrl); 1082 shpc_get_cur_bus_speed(ctrl); 1083 1084 /* 1085 * Unmask all event interrupts of all slots 1086 */ 1087 for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) { 1088 slot_reg = shpc_readl(ctrl, SLOT_REG(hp_slot)); 1089 ctrl_dbg(ctrl, "Default Logical Slot Register %d value %x\n", 1090 hp_slot, slot_reg); 1091 slot_reg &= ~(PRSNT_CHANGE_INTR_MASK | ISO_PFAULT_INTR_MASK | 1092 BUTTON_PRESS_INTR_MASK | MRL_CHANGE_INTR_MASK | 1093 CON_PFAULT_INTR_MASK | SLOT_REG_RSVDZ_MASK); 1094 shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg); 1095 } 1096 if (!shpchp_poll_mode) { 1097 /* Unmask all general input interrupts and SERR */ 1098 tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); 1099 tempdword &= ~(GLOBAL_INTR_MASK | COMMAND_INTR_MASK | 1100 SERR_INTR_RSVDZ_MASK); 1101 shpc_writel(ctrl, SERR_INTR_ENABLE, tempdword); 1102 tempdword = shpc_readl(ctrl, SERR_INTR_ENABLE); 1103 ctrl_dbg(ctrl, "SERR_INTR_ENABLE = %x\n", tempdword); 1104 } 1105 1106 return 0; 1107 1108 /* We end up here for the many possible ways to fail this API. */ 1109 abort_iounmap: 1110 iounmap(ctrl->creg); 1111 abort: 1112 return rc; 1113 } 1114