1 /* 2 * Standard Hot Plug Controller Driver 3 * 4 * Copyright (C) 1995,2001 Compaq Computer Corporation 5 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com) 6 * Copyright (C) 2001 IBM Corp. 7 * Copyright (C) 2003-2004 Intel Corporation 8 * 9 * All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or (at 14 * your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 19 * NON INFRINGEMENT. See the GNU General Public License for more 20 * details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com> 27 * 28 */ 29 30 #include <linux/module.h> 31 #include <linux/kernel.h> 32 #include <linux/types.h> 33 #include <linux/smp_lock.h> 34 #include <linux/pci.h> 35 #include "../pci.h" 36 #include "shpchp.h" 37 38 static void interrupt_event_handler(struct controller *ctrl); 39 40 static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */ 41 static struct semaphore event_exit; /* guard ensure thread has exited before calling it quits */ 42 static int event_finished; 43 static unsigned long pushbutton_pending; /* = 0 */ 44 45 u8 shpchp_handle_attention_button(u8 hp_slot, void *inst_id) 46 { 47 struct controller *ctrl = (struct controller *) inst_id; 48 struct slot *p_slot; 49 u8 rc = 0; 50 u8 getstatus; 51 struct event_info *taskInfo; 52 53 /* Attention Button Change */ 54 dbg("shpchp: Attention button interrupt received.\n"); 55 56 /* This is the structure that tells the worker thread what to do */ 57 taskInfo = &(ctrl->event_queue[ctrl->next_event]); 58 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 59 60 p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); 61 p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 62 63 ctrl->next_event = (ctrl->next_event + 1) % 10; 64 taskInfo->hp_slot = hp_slot; 65 66 rc++; 67 68 /* 69 * Button pressed - See if need to TAKE ACTION!!! 70 */ 71 info("Button pressed on Slot(%d)\n", ctrl->first_slot + hp_slot); 72 taskInfo->event_type = INT_BUTTON_PRESS; 73 74 if ((p_slot->state == BLINKINGON_STATE) 75 || (p_slot->state == BLINKINGOFF_STATE)) { 76 /* Cancel if we are still blinking; this means that we press the 77 * attention again before the 5 sec. limit expires to cancel hot-add 78 * or hot-remove 79 */ 80 taskInfo->event_type = INT_BUTTON_CANCEL; 81 info("Button cancel on Slot(%d)\n", ctrl->first_slot + hp_slot); 82 } else if ((p_slot->state == POWERON_STATE) 83 || (p_slot->state == POWEROFF_STATE)) { 84 /* Ignore if the slot is on power-on or power-off state; this 85 * means that the previous attention button action to hot-add or 86 * hot-remove is undergoing 87 */ 88 taskInfo->event_type = INT_BUTTON_IGNORE; 89 info("Button ignore on Slot(%d)\n", ctrl->first_slot + hp_slot); 90 } 91 92 if (rc) 93 up(&event_semaphore); /* signal event thread that new event is posted */ 94 95 return 0; 96 97 } 98 99 u8 shpchp_handle_switch_change(u8 hp_slot, void *inst_id) 100 { 101 struct controller *ctrl = (struct controller *) inst_id; 102 struct slot *p_slot; 103 u8 rc = 0; 104 u8 getstatus; 105 struct event_info *taskInfo; 106 107 /* Switch Change */ 108 dbg("shpchp: Switch interrupt received.\n"); 109 110 /* This is the structure that tells the worker thread 111 * what to do 112 */ 113 taskInfo = &(ctrl->event_queue[ctrl->next_event]); 114 ctrl->next_event = (ctrl->next_event + 1) % 10; 115 taskInfo->hp_slot = hp_slot; 116 117 rc++; 118 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 119 p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); 120 p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 121 dbg("%s: Card present %x Power status %x\n", __FUNCTION__, 122 p_slot->presence_save, p_slot->pwr_save); 123 124 if (getstatus) { 125 /* 126 * Switch opened 127 */ 128 info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); 129 taskInfo->event_type = INT_SWITCH_OPEN; 130 if (p_slot->pwr_save && p_slot->presence_save) { 131 taskInfo->event_type = INT_POWER_FAULT; 132 err("Surprise Removal of card\n"); 133 } 134 } else { 135 /* 136 * Switch closed 137 */ 138 info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); 139 taskInfo->event_type = INT_SWITCH_CLOSE; 140 } 141 142 if (rc) 143 up(&event_semaphore); /* signal event thread that new event is posted */ 144 145 return rc; 146 } 147 148 u8 shpchp_handle_presence_change(u8 hp_slot, void *inst_id) 149 { 150 struct controller *ctrl = (struct controller *) inst_id; 151 struct slot *p_slot; 152 u8 rc = 0; 153 /*u8 temp_byte;*/ 154 struct event_info *taskInfo; 155 156 /* Presence Change */ 157 dbg("shpchp: Presence/Notify input change.\n"); 158 159 /* This is the structure that tells the worker thread 160 * what to do 161 */ 162 taskInfo = &(ctrl->event_queue[ctrl->next_event]); 163 ctrl->next_event = (ctrl->next_event + 1) % 10; 164 taskInfo->hp_slot = hp_slot; 165 166 rc++; 167 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 168 169 /* 170 * Save the presence state 171 */ 172 p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); 173 if (p_slot->presence_save) { 174 /* 175 * Card Present 176 */ 177 info("Card present on Slot(%d)\n", ctrl->first_slot + hp_slot); 178 taskInfo->event_type = INT_PRESENCE_ON; 179 } else { 180 /* 181 * Not Present 182 */ 183 info("Card not present on Slot(%d)\n", ctrl->first_slot + hp_slot); 184 taskInfo->event_type = INT_PRESENCE_OFF; 185 } 186 187 if (rc) 188 up(&event_semaphore); /* signal event thread that new event is posted */ 189 190 return rc; 191 } 192 193 u8 shpchp_handle_power_fault(u8 hp_slot, void *inst_id) 194 { 195 struct controller *ctrl = (struct controller *) inst_id; 196 struct slot *p_slot; 197 u8 rc = 0; 198 struct event_info *taskInfo; 199 200 /* Power fault */ 201 dbg("shpchp: Power fault interrupt received.\n"); 202 203 /* This is the structure that tells the worker thread 204 * what to do 205 */ 206 taskInfo = &(ctrl->event_queue[ctrl->next_event]); 207 ctrl->next_event = (ctrl->next_event + 1) % 10; 208 taskInfo->hp_slot = hp_slot; 209 210 rc++; 211 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 212 213 if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { 214 /* 215 * Power fault Cleared 216 */ 217 info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); 218 p_slot->status = 0x00; 219 taskInfo->event_type = INT_POWER_FAULT_CLEAR; 220 } else { 221 /* 222 * Power fault 223 */ 224 info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); 225 taskInfo->event_type = INT_POWER_FAULT; 226 /* set power fault status for this board */ 227 p_slot->status = 0xFF; 228 info("power fault bit %x set\n", hp_slot); 229 } 230 if (rc) 231 up(&event_semaphore); /* signal event thread that new event is posted */ 232 233 return rc; 234 } 235 236 /* The following routines constitute the bulk of the 237 hotplug controller logic 238 */ 239 static int change_bus_speed(struct controller *ctrl, struct slot *p_slot, 240 enum pci_bus_speed speed) 241 { 242 int rc = 0; 243 244 dbg("%s: change to speed %d\n", __FUNCTION__, speed); 245 down(&ctrl->crit_sect); 246 if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, speed))) { 247 err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__); 248 up(&ctrl->crit_sect); 249 return WRONG_BUS_FREQUENCY; 250 } 251 252 if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { 253 err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n", 254 __FUNCTION__); 255 err("%s: Error code (%d)\n", __FUNCTION__, rc); 256 up(&ctrl->crit_sect); 257 return WRONG_BUS_FREQUENCY; 258 } 259 up(&ctrl->crit_sect); 260 return rc; 261 } 262 263 static int fix_bus_speed(struct controller *ctrl, struct slot *pslot, 264 u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp, 265 enum pci_bus_speed msp) 266 { 267 int rc = 0; 268 269 if (flag != 0) { /* Other slots on the same bus are occupied */ 270 if ( asp < bsp ) { 271 err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bsp, asp); 272 return WRONG_BUS_FREQUENCY; 273 } 274 } else { 275 /* Other slots on the same bus are empty */ 276 if (msp == bsp) { 277 /* if adapter_speed >= bus_speed, do nothing */ 278 if (asp < bsp) { 279 /* 280 * Try to lower bus speed to accommodate the adapter if other slots 281 * on the same controller are empty 282 */ 283 if ((rc = change_bus_speed(ctrl, pslot, asp))) 284 return rc; 285 } 286 } else { 287 if (asp < msp) { 288 if ((rc = change_bus_speed(ctrl, pslot, asp))) 289 return rc; 290 } else { 291 if ((rc = change_bus_speed(ctrl, pslot, msp))) 292 return rc; 293 } 294 } 295 } 296 return rc; 297 } 298 299 /** 300 * board_added - Called after a board has been added to the system. 301 * 302 * Turns power on for the board 303 * Configures board 304 * 305 */ 306 static int board_added(struct slot *p_slot) 307 { 308 u8 hp_slot; 309 u8 slots_not_empty = 0; 310 int rc = 0; 311 enum pci_bus_speed adapter_speed, bus_speed, max_bus_speed; 312 u8 pi, mode; 313 struct controller *ctrl = p_slot->ctrl; 314 315 hp_slot = p_slot->device - ctrl->slot_device_offset; 316 317 dbg("%s: p_slot->device, slot_offset, hp_slot = %d, %d ,%d\n", 318 __FUNCTION__, p_slot->device, 319 ctrl->slot_device_offset, hp_slot); 320 321 /* Wait for exclusive access to hardware */ 322 down(&ctrl->crit_sect); 323 324 /* Power on slot without connecting to bus */ 325 rc = p_slot->hpc_ops->power_on_slot(p_slot); 326 if (rc) { 327 err("%s: Failed to power on slot\n", __FUNCTION__); 328 /* Done with exclusive hardware access */ 329 up(&ctrl->crit_sect); 330 return -1; 331 } 332 333 rc = p_slot->hpc_ops->check_cmd_status(ctrl); 334 if (rc) { 335 err("%s: Failed to power on slot, error code(%d)\n", __FUNCTION__, rc); 336 /* Done with exclusive hardware access */ 337 up(&ctrl->crit_sect); 338 return -1; 339 } 340 341 342 if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) { 343 if (slots_not_empty) 344 return WRONG_BUS_FREQUENCY; 345 346 if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) { 347 err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__); 348 up(&ctrl->crit_sect); 349 return WRONG_BUS_FREQUENCY; 350 } 351 352 if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { 353 err("%s: Can't set bus speed/mode in the case of adapter & bus mismatch\n", 354 __FUNCTION__); 355 err("%s: Error code (%d)\n", __FUNCTION__, rc); 356 up(&ctrl->crit_sect); 357 return WRONG_BUS_FREQUENCY; 358 } 359 /* turn on board, blink green LED, turn off Amber LED */ 360 if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { 361 err("%s: Issue of Slot Enable command failed\n", __FUNCTION__); 362 up(&ctrl->crit_sect); 363 return rc; 364 } 365 366 if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { 367 err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc); 368 up(&ctrl->crit_sect); 369 return rc; 370 } 371 } 372 373 rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &adapter_speed); 374 /* 0 = PCI 33Mhz, 1 = PCI 66 Mhz, 2 = PCI-X 66 PA, 4 = PCI-X 66 ECC, */ 375 /* 5 = PCI-X 133 PA, 7 = PCI-X 133 ECC, 0xa = PCI-X 133 Mhz 266, */ 376 /* 0xd = PCI-X 133 Mhz 533 */ 377 /* This encoding is different from the one used in cur_bus_speed & */ 378 /* max_bus_speed */ 379 380 if (rc || adapter_speed == PCI_SPEED_UNKNOWN) { 381 err("%s: Can't get adapter speed or bus mode mismatch\n", __FUNCTION__); 382 /* Done with exclusive hardware access */ 383 up(&ctrl->crit_sect); 384 return WRONG_BUS_FREQUENCY; 385 } 386 387 rc = p_slot->hpc_ops->get_cur_bus_speed(p_slot, &bus_speed); 388 if (rc || bus_speed == PCI_SPEED_UNKNOWN) { 389 err("%s: Can't get bus operation speed\n", __FUNCTION__); 390 /* Done with exclusive hardware access */ 391 up(&ctrl->crit_sect); 392 return WRONG_BUS_FREQUENCY; 393 } 394 395 rc = p_slot->hpc_ops->get_max_bus_speed(p_slot, &max_bus_speed); 396 if (rc || max_bus_speed == PCI_SPEED_UNKNOWN) { 397 err("%s: Can't get max bus operation speed\n", __FUNCTION__); 398 max_bus_speed = bus_speed; 399 } 400 401 /* Done with exclusive hardware access */ 402 up(&ctrl->crit_sect); 403 404 if ((rc = p_slot->hpc_ops->get_prog_int(p_slot, &pi))) { 405 err("%s: Can't get controller programming interface, set it to 1\n", __FUNCTION__); 406 pi = 1; 407 } 408 409 /* Check if there are other slots or devices on the same bus */ 410 if (!list_empty(&ctrl->pci_dev->subordinate->devices)) 411 slots_not_empty = 1; 412 413 dbg("%s: slots_not_empty %d, pi %d\n", __FUNCTION__, 414 slots_not_empty, pi); 415 dbg("adapter_speed %d, bus_speed %d, max_bus_speed %d\n", 416 adapter_speed, bus_speed, max_bus_speed); 417 418 if (pi == 2) { 419 dbg("%s: In PI = %d\n", __FUNCTION__, pi); 420 if ((rc = p_slot->hpc_ops->get_mode1_ECC_cap(p_slot, &mode))) { 421 err("%s: Can't get Mode1_ECC, set mode to 0\n", __FUNCTION__); 422 mode = 0; 423 } 424 425 switch (adapter_speed) { 426 case PCI_SPEED_133MHz_PCIX_533: 427 case PCI_SPEED_133MHz_PCIX_266: 428 if ((bus_speed != adapter_speed) && 429 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 430 return rc; 431 break; 432 case PCI_SPEED_133MHz_PCIX_ECC: 433 case PCI_SPEED_133MHz_PCIX: 434 if (mode) { /* Bus - Mode 1 ECC */ 435 if ((bus_speed != 0x7) && 436 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 437 return rc; 438 } else { 439 if ((bus_speed != 0x4) && 440 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 441 return rc; 442 } 443 break; 444 case PCI_SPEED_66MHz_PCIX_ECC: 445 case PCI_SPEED_66MHz_PCIX: 446 if (mode) { /* Bus - Mode 1 ECC */ 447 if ((bus_speed != 0x5) && 448 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 449 return rc; 450 } else { 451 if ((bus_speed != 0x2) && 452 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 453 return rc; 454 } 455 break; 456 case PCI_SPEED_66MHz: 457 if ((bus_speed != 0x1) && 458 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 459 return rc; 460 break; 461 case PCI_SPEED_33MHz: 462 if (bus_speed > 0x0) { 463 if (slots_not_empty == 0) { 464 if ((rc = change_bus_speed(ctrl, p_slot, adapter_speed))) 465 return rc; 466 } else { 467 err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed); 468 return WRONG_BUS_FREQUENCY; 469 } 470 } 471 break; 472 default: 473 err("%s: speed of bus %x and adapter %x mismatch\n", __FUNCTION__, bus_speed, adapter_speed); 474 return WRONG_BUS_FREQUENCY; 475 } 476 } else { 477 /* If adpater_speed == bus_speed, nothing to do here */ 478 dbg("%s: In PI = %d\n", __FUNCTION__, pi); 479 if ((adapter_speed != bus_speed) && 480 ((rc = fix_bus_speed(ctrl, p_slot, slots_not_empty, adapter_speed, bus_speed, max_bus_speed)))) 481 return rc; 482 } 483 484 down(&ctrl->crit_sect); 485 /* turn on board, blink green LED, turn off Amber LED */ 486 if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) { 487 err("%s: Issue of Slot Enable command failed\n", __FUNCTION__); 488 up(&ctrl->crit_sect); 489 return rc; 490 } 491 492 if ((rc = p_slot->hpc_ops->check_cmd_status(ctrl))) { 493 err("%s: Failed to enable slot, error code(%d)\n", __FUNCTION__, rc); 494 up(&ctrl->crit_sect); 495 return rc; 496 } 497 498 up(&ctrl->crit_sect); 499 500 /* Wait for ~1 second */ 501 wait_for_ctrl_irq (ctrl); 502 503 dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); 504 /* Check for a power fault */ 505 if (p_slot->status == 0xFF) { 506 /* power fault occurred, but it was benign */ 507 dbg("%s: power fault\n", __FUNCTION__); 508 rc = POWER_FAILURE; 509 p_slot->status = 0; 510 goto err_exit; 511 } 512 513 if (shpchp_configure_device(p_slot)) { 514 err("Cannot add device at 0x%x:0x%x\n", p_slot->bus, 515 p_slot->device); 516 goto err_exit; 517 } 518 519 p_slot->status = 0; 520 p_slot->is_a_board = 0x01; 521 p_slot->pwr_save = 1; 522 523 /* Wait for exclusive access to hardware */ 524 down(&ctrl->crit_sect); 525 526 p_slot->hpc_ops->green_led_on(p_slot); 527 528 /* Done with exclusive hardware access */ 529 up(&ctrl->crit_sect); 530 531 return 0; 532 533 err_exit: 534 /* Wait for exclusive access to hardware */ 535 down(&ctrl->crit_sect); 536 537 /* turn off slot, turn on Amber LED, turn off Green LED */ 538 rc = p_slot->hpc_ops->slot_disable(p_slot); 539 if (rc) { 540 err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); 541 /* Done with exclusive hardware access */ 542 up(&ctrl->crit_sect); 543 return rc; 544 } 545 546 rc = p_slot->hpc_ops->check_cmd_status(ctrl); 547 if (rc) { 548 err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); 549 /* Done with exclusive hardware access */ 550 up(&ctrl->crit_sect); 551 return rc; 552 } 553 554 /* Done with exclusive hardware access */ 555 up(&ctrl->crit_sect); 556 557 return(rc); 558 } 559 560 561 /** 562 * remove_board - Turns off slot and LED's 563 * 564 */ 565 static int remove_board(struct slot *p_slot) 566 { 567 struct controller *ctrl = p_slot->ctrl; 568 u8 hp_slot; 569 int rc; 570 571 if (shpchp_unconfigure_device(p_slot)) 572 return(1); 573 574 hp_slot = p_slot->device - ctrl->slot_device_offset; 575 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 576 577 dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); 578 579 /* Change status to shutdown */ 580 if (p_slot->is_a_board) 581 p_slot->status = 0x01; 582 583 /* Wait for exclusive access to hardware */ 584 down(&ctrl->crit_sect); 585 586 /* turn off slot, turn on Amber LED, turn off Green LED */ 587 rc = p_slot->hpc_ops->slot_disable(p_slot); 588 if (rc) { 589 err("%s: Issue of Slot Disable command failed\n", __FUNCTION__); 590 /* Done with exclusive hardware access */ 591 up(&ctrl->crit_sect); 592 return rc; 593 } 594 595 rc = p_slot->hpc_ops->check_cmd_status(ctrl); 596 if (rc) { 597 err("%s: Failed to disable slot, error code(%d)\n", __FUNCTION__, rc); 598 /* Done with exclusive hardware access */ 599 up(&ctrl->crit_sect); 600 return rc; 601 } 602 603 rc = p_slot->hpc_ops->set_attention_status(p_slot, 0); 604 if (rc) { 605 err("%s: Issue of Set Attention command failed\n", __FUNCTION__); 606 /* Done with exclusive hardware access */ 607 up(&ctrl->crit_sect); 608 return rc; 609 } 610 611 /* Done with exclusive hardware access */ 612 up(&ctrl->crit_sect); 613 614 p_slot->pwr_save = 0; 615 p_slot->is_a_board = 0; 616 617 return 0; 618 } 619 620 621 static void pushbutton_helper_thread (unsigned long data) 622 { 623 pushbutton_pending = data; 624 625 up(&event_semaphore); 626 } 627 628 629 /** 630 * shpchp_pushbutton_thread 631 * 632 * Scheduled procedure to handle blocking stuff for the pushbuttons 633 * Handles all pending events and exits. 634 * 635 */ 636 static void shpchp_pushbutton_thread (unsigned long slot) 637 { 638 struct slot *p_slot = (struct slot *) slot; 639 u8 getstatus; 640 641 pushbutton_pending = 0; 642 643 if (!p_slot) { 644 dbg("%s: Error! slot NULL\n", __FUNCTION__); 645 return; 646 } 647 648 p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 649 if (getstatus) { 650 p_slot->state = POWEROFF_STATE; 651 652 shpchp_disable_slot(p_slot); 653 p_slot->state = STATIC_STATE; 654 } else { 655 p_slot->state = POWERON_STATE; 656 657 if (shpchp_enable_slot(p_slot)) { 658 /* Wait for exclusive access to hardware */ 659 down(&p_slot->ctrl->crit_sect); 660 661 p_slot->hpc_ops->green_led_off(p_slot); 662 663 /* Done with exclusive hardware access */ 664 up(&p_slot->ctrl->crit_sect); 665 } 666 p_slot->state = STATIC_STATE; 667 } 668 669 return; 670 } 671 672 673 /* this is the main worker thread */ 674 static int event_thread(void* data) 675 { 676 struct controller *ctrl; 677 lock_kernel(); 678 daemonize("shpchpd_event"); 679 unlock_kernel(); 680 681 while (1) { 682 dbg("!!!!event_thread sleeping\n"); 683 down_interruptible (&event_semaphore); 684 dbg("event_thread woken finished = %d\n", event_finished); 685 if (event_finished || signal_pending(current)) 686 break; 687 /* Do stuff here */ 688 if (pushbutton_pending) 689 shpchp_pushbutton_thread(pushbutton_pending); 690 else 691 for (ctrl = shpchp_ctrl_list; ctrl; ctrl=ctrl->next) 692 interrupt_event_handler(ctrl); 693 } 694 dbg("event_thread signals exit\n"); 695 up(&event_exit); 696 return 0; 697 } 698 699 int shpchp_event_start_thread (void) 700 { 701 int pid; 702 703 /* initialize our semaphores */ 704 init_MUTEX_LOCKED(&event_exit); 705 event_finished=0; 706 707 init_MUTEX_LOCKED(&event_semaphore); 708 pid = kernel_thread(event_thread, NULL, 0); 709 710 if (pid < 0) { 711 err ("Can't start up our event thread\n"); 712 return -1; 713 } 714 return 0; 715 } 716 717 718 void shpchp_event_stop_thread (void) 719 { 720 event_finished = 1; 721 up(&event_semaphore); 722 down(&event_exit); 723 } 724 725 726 static int update_slot_info (struct slot *slot) 727 { 728 struct hotplug_slot_info *info; 729 int result; 730 731 info = kmalloc(sizeof(*info), GFP_KERNEL); 732 if (!info) 733 return -ENOMEM; 734 735 slot->hpc_ops->get_power_status(slot, &(info->power_status)); 736 slot->hpc_ops->get_attention_status(slot, &(info->attention_status)); 737 slot->hpc_ops->get_latch_status(slot, &(info->latch_status)); 738 slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status)); 739 740 result = pci_hp_change_slot_info(slot->hotplug_slot, info); 741 kfree (info); 742 return result; 743 } 744 745 static void interrupt_event_handler(struct controller *ctrl) 746 { 747 int loop = 0; 748 int change = 1; 749 u8 hp_slot; 750 u8 getstatus; 751 struct slot *p_slot; 752 753 while (change) { 754 change = 0; 755 756 for (loop = 0; loop < 10; loop++) { 757 if (ctrl->event_queue[loop].event_type != 0) { 758 dbg("%s:loop %x event_type %x\n", __FUNCTION__, loop, 759 ctrl->event_queue[loop].event_type); 760 hp_slot = ctrl->event_queue[loop].hp_slot; 761 762 p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); 763 764 if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { 765 dbg("%s: button cancel\n", __FUNCTION__); 766 del_timer(&p_slot->task_event); 767 768 switch (p_slot->state) { 769 case BLINKINGOFF_STATE: 770 /* Wait for exclusive access to hardware */ 771 down(&ctrl->crit_sect); 772 773 p_slot->hpc_ops->green_led_on(p_slot); 774 775 p_slot->hpc_ops->set_attention_status(p_slot, 0); 776 777 /* Done with exclusive hardware access */ 778 up(&ctrl->crit_sect); 779 break; 780 case BLINKINGON_STATE: 781 /* Wait for exclusive access to hardware */ 782 down(&ctrl->crit_sect); 783 784 p_slot->hpc_ops->green_led_off(p_slot); 785 786 p_slot->hpc_ops->set_attention_status(p_slot, 0); 787 788 /* Done with exclusive hardware access */ 789 up(&ctrl->crit_sect); 790 791 break; 792 default: 793 warn("Not a valid state\n"); 794 return; 795 } 796 info(msg_button_cancel, p_slot->number); 797 p_slot->state = STATIC_STATE; 798 } else if (ctrl->event_queue[loop].event_type == INT_BUTTON_PRESS) { 799 /* Button Pressed (No action on 1st press...) */ 800 dbg("%s: Button pressed\n", __FUNCTION__); 801 802 p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 803 if (getstatus) { 804 /* slot is on */ 805 dbg("%s: slot is on\n", __FUNCTION__); 806 p_slot->state = BLINKINGOFF_STATE; 807 info(msg_button_off, p_slot->number); 808 } else { 809 /* slot is off */ 810 dbg("%s: slot is off\n", __FUNCTION__); 811 p_slot->state = BLINKINGON_STATE; 812 info(msg_button_on, p_slot->number); 813 } 814 815 /* Wait for exclusive access to hardware */ 816 down(&ctrl->crit_sect); 817 818 /* blink green LED and turn off amber */ 819 p_slot->hpc_ops->green_led_blink(p_slot); 820 821 p_slot->hpc_ops->set_attention_status(p_slot, 0); 822 823 /* Done with exclusive hardware access */ 824 up(&ctrl->crit_sect); 825 826 init_timer(&p_slot->task_event); 827 p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */ 828 p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread; 829 p_slot->task_event.data = (unsigned long) p_slot; 830 831 dbg("%s: add_timer p_slot = %p\n", __FUNCTION__,(void *) p_slot); 832 add_timer(&p_slot->task_event); 833 } else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) { 834 /***********POWER FAULT********************/ 835 dbg("%s: power fault\n", __FUNCTION__); 836 /* Wait for exclusive access to hardware */ 837 down(&ctrl->crit_sect); 838 839 p_slot->hpc_ops->set_attention_status(p_slot, 1); 840 841 p_slot->hpc_ops->green_led_off(p_slot); 842 843 /* Done with exclusive hardware access */ 844 up(&ctrl->crit_sect); 845 } else { 846 /* refresh notification */ 847 if (p_slot) 848 update_slot_info(p_slot); 849 } 850 851 ctrl->event_queue[loop].event_type = 0; 852 853 change = 1; 854 } 855 } /* End of FOR loop */ 856 } 857 858 return; 859 } 860 861 862 int shpchp_enable_slot (struct slot *p_slot) 863 { 864 u8 getstatus = 0; 865 int rc; 866 867 /* Check to see if (latch closed, card present, power off) */ 868 down(&p_slot->ctrl->crit_sect); 869 rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); 870 if (rc || !getstatus) { 871 info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); 872 up(&p_slot->ctrl->crit_sect); 873 return -ENODEV; 874 } 875 rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 876 if (rc || getstatus) { 877 info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); 878 up(&p_slot->ctrl->crit_sect); 879 return -ENODEV; 880 } 881 rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 882 if (rc || getstatus) { 883 info("%s: already enabled on slot(%x)\n", __FUNCTION__, p_slot->number); 884 up(&p_slot->ctrl->crit_sect); 885 return -ENODEV; 886 } 887 up(&p_slot->ctrl->crit_sect); 888 889 p_slot->is_a_board = 1; 890 891 /* We have to save the presence info for these slots */ 892 p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save)); 893 p_slot->hpc_ops->get_power_status(p_slot, &(p_slot->pwr_save)); 894 dbg("%s: p_slot->pwr_save %x\n", __FUNCTION__, p_slot->pwr_save); 895 p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 896 897 rc = board_added(p_slot); 898 if (rc) { 899 p_slot->hpc_ops->get_adapter_status(p_slot, 900 &(p_slot->presence_save)); 901 p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 902 } 903 904 update_slot_info(p_slot); 905 return rc; 906 } 907 908 909 int shpchp_disable_slot (struct slot *p_slot) 910 { 911 u8 getstatus = 0; 912 int ret = 0; 913 914 if (!p_slot->ctrl) 915 return -ENODEV; 916 917 /* Check to see if (latch closed, card present, power on) */ 918 down(&p_slot->ctrl->crit_sect); 919 920 ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); 921 if (ret || !getstatus) { 922 info("%s: no adapter on slot(%x)\n", __FUNCTION__, p_slot->number); 923 up(&p_slot->ctrl->crit_sect); 924 return -ENODEV; 925 } 926 ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); 927 if (ret || getstatus) { 928 info("%s: latch open on slot(%x)\n", __FUNCTION__, p_slot->number); 929 up(&p_slot->ctrl->crit_sect); 930 return -ENODEV; 931 } 932 ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); 933 if (ret || !getstatus) { 934 info("%s: already disabled slot(%x)\n", __FUNCTION__, p_slot->number); 935 up(&p_slot->ctrl->crit_sect); 936 return -ENODEV; 937 } 938 up(&p_slot->ctrl->crit_sect); 939 940 ret = remove_board(p_slot); 941 update_slot_info(p_slot); 942 return ret; 943 } 944 945