xref: /openbmc/linux/drivers/pci/hotplug/pciehp_pci.c (revision ee65728e)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * PCI Express Hot Plug Controller Driver
4  *
5  * Copyright (C) 1995,2001 Compaq Computer Corporation
6  * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
7  * Copyright (C) 2001 IBM Corp.
8  * Copyright (C) 2003-2004 Intel Corporation
9  *
10  * All rights reserved.
11  *
12  * Send feedback to <greg@kroah.com>, <kristen.c.accardi@intel.com>
13  *
14  */
15 
16 #define dev_fmt(fmt) "pciehp: " fmt
17 
18 #include <linux/kernel.h>
19 #include <linux/types.h>
20 #include <linux/pci.h>
21 #include "../pci.h"
22 #include "pciehp.h"
23 
24 /**
25  * pciehp_configure_device() - enumerate PCI devices below a hotplug bridge
26  * @ctrl: PCIe hotplug controller
27  *
28  * Enumerate PCI devices below a hotplug bridge and add them to the system.
29  * Return 0 on success, %-EEXIST if the devices are already enumerated or
30  * %-ENODEV if enumeration failed.
31  */
32 int pciehp_configure_device(struct controller *ctrl)
33 {
34 	struct pci_dev *dev;
35 	struct pci_dev *bridge = ctrl->pcie->port;
36 	struct pci_bus *parent = bridge->subordinate;
37 	int num, ret = 0;
38 
39 	pci_lock_rescan_remove();
40 
41 	dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
42 	if (dev) {
43 		/*
44 		 * The device is already there. Either configured by the
45 		 * boot firmware or a previous hotplug event.
46 		 */
47 		ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n",
48 			 pci_name(dev), pci_domain_nr(parent), parent->number);
49 		pci_dev_put(dev);
50 		ret = -EEXIST;
51 		goto out;
52 	}
53 
54 	num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
55 	if (num == 0) {
56 		ctrl_err(ctrl, "No new device found\n");
57 		ret = -ENODEV;
58 		goto out;
59 	}
60 
61 	for_each_pci_bridge(dev, parent)
62 		pci_hp_add_bridge(dev);
63 
64 	pci_assign_unassigned_bridge_resources(bridge);
65 	pcie_bus_configure_settings(parent);
66 	pci_bus_add_devices(parent);
67 
68  out:
69 	pci_unlock_rescan_remove();
70 	return ret;
71 }
72 
73 /**
74  * pciehp_unconfigure_device() - remove PCI devices below a hotplug bridge
75  * @ctrl: PCIe hotplug controller
76  * @presence: whether the card is still present in the slot;
77  *	true for safe removal via sysfs or an Attention Button press,
78  *	false for surprise removal
79  *
80  * Unbind PCI devices below a hotplug bridge from their drivers and remove
81  * them from the system.  Safely removed devices are quiesced.  Surprise
82  * removed devices are marked as such to prevent further accesses.
83  */
84 void pciehp_unconfigure_device(struct controller *ctrl, bool presence)
85 {
86 	struct pci_dev *dev, *temp;
87 	struct pci_bus *parent = ctrl->pcie->port->subordinate;
88 	u16 command;
89 
90 	ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
91 		 __func__, pci_domain_nr(parent), parent->number);
92 
93 	if (!presence)
94 		pci_walk_bus(parent, pci_dev_set_disconnected, NULL);
95 
96 	pci_lock_rescan_remove();
97 
98 	/*
99 	 * Stopping an SR-IOV PF device removes all the associated VFs,
100 	 * which will update the bus->devices list and confuse the
101 	 * iterator.  Therefore, iterate in reverse so we remove the VFs
102 	 * first, then the PF.  We do the same in pci_stop_bus_device().
103 	 */
104 	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
105 					 bus_list) {
106 		pci_dev_get(dev);
107 		pci_stop_and_remove_bus_device(dev);
108 		/*
109 		 * Ensure that no new Requests will be generated from
110 		 * the device.
111 		 */
112 		if (presence) {
113 			pci_read_config_word(dev, PCI_COMMAND, &command);
114 			command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);
115 			command |= PCI_COMMAND_INTX_DISABLE;
116 			pci_write_config_word(dev, PCI_COMMAND, command);
117 		}
118 		pci_dev_put(dev);
119 	}
120 
121 	pci_unlock_rescan_remove();
122 }
123