1 /* 2 * IBM Hot Plug Controller Driver 3 * 4 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation 5 * 6 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com) 7 * Copyright (C) 2001-2003 IBM Corp. 8 * 9 * All rights reserved. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or (at 14 * your option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 19 * NON INFRINGEMENT. See the GNU General Public License for more 20 * details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 * 26 * Send feedback to <gregkh@us.ibm.com> 27 * 28 */ 29 30 #include <linux/init.h> 31 #include <linux/module.h> 32 #include <linux/slab.h> 33 #include <linux/pci.h> 34 #include <linux/interrupt.h> 35 #include <linux/delay.h> 36 #include <linux/wait.h> 37 #include "../pci.h" 38 #include <asm/pci_x86.h> /* for struct irq_routing_table */ 39 #include <asm/io_apic.h> 40 #include "ibmphp.h" 41 42 #define attn_on(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNON) 43 #define attn_off(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_ATTNOFF) 44 #define attn_LED_blink(sl) ibmphp_hpc_writeslot (sl, HPC_SLOT_BLINKLED) 45 #define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot (sl, READ_REVLEVEL, rev) 46 #define get_hpc_options(sl, opt) ibmphp_hpc_readslot (sl, READ_HPCOPTIONS, opt) 47 48 #define DRIVER_VERSION "0.6" 49 #define DRIVER_DESC "IBM Hot Plug PCI Controller Driver" 50 51 int ibmphp_debug; 52 53 static bool debug; 54 module_param(debug, bool, S_IRUGO | S_IWUSR); 55 MODULE_PARM_DESC (debug, "Debugging mode enabled or not"); 56 MODULE_LICENSE ("GPL"); 57 MODULE_DESCRIPTION (DRIVER_DESC); 58 59 struct pci_bus *ibmphp_pci_bus; 60 static int max_slots; 61 62 static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS 63 * tables don't provide default info for empty slots */ 64 65 static int init_flag; 66 67 /* 68 static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8); 69 70 static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value) 71 { 72 return get_max_adapter_speed_1 (hs, value, 1); 73 } 74 */ 75 static inline int get_cur_bus_info(struct slot **sl) 76 { 77 int rc = 1; 78 struct slot *slot_cur = *sl; 79 80 debug("options = %x\n", slot_cur->ctrl->options); 81 debug("revision = %x\n", slot_cur->ctrl->revision); 82 83 if (READ_BUS_STATUS(slot_cur->ctrl)) 84 rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL); 85 86 if (rc) 87 return rc; 88 89 slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus); 90 if (READ_BUS_MODE(slot_cur->ctrl)) 91 slot_cur->bus_on->current_bus_mode = 92 CURRENT_BUS_MODE(slot_cur->busstatus); 93 else 94 slot_cur->bus_on->current_bus_mode = 0xFF; 95 96 debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n", 97 slot_cur->busstatus, 98 slot_cur->bus_on->current_speed, 99 slot_cur->bus_on->current_bus_mode); 100 101 *sl = slot_cur; 102 return 0; 103 } 104 105 static inline int slot_update(struct slot **sl) 106 { 107 int rc; 108 rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL); 109 if (rc) 110 return rc; 111 if (!init_flag) 112 rc = get_cur_bus_info(sl); 113 return rc; 114 } 115 116 static int __init get_max_slots (void) 117 { 118 struct slot *slot_cur; 119 struct list_head *tmp; 120 u8 slot_count = 0; 121 122 list_for_each(tmp, &ibmphp_slot_head) { 123 slot_cur = list_entry(tmp, struct slot, ibm_slot_list); 124 /* sometimes the hot-pluggable slots start with 4 (not always from 1) */ 125 slot_count = max(slot_count, slot_cur->number); 126 } 127 return slot_count; 128 } 129 130 /* This routine will put the correct slot->device information per slot. It's 131 * called from initialization of the slot structures. It will also assign 132 * interrupt numbers per each slot. 133 * Parameters: struct slot 134 * Returns 0 or errors 135 */ 136 int ibmphp_init_devno(struct slot **cur_slot) 137 { 138 struct irq_routing_table *rtable; 139 int len; 140 int loop; 141 int i; 142 143 rtable = pcibios_get_irq_routing_table(); 144 if (!rtable) { 145 err("no BIOS routing table...\n"); 146 return -ENOMEM; 147 } 148 149 len = (rtable->size - sizeof(struct irq_routing_table)) / 150 sizeof(struct irq_info); 151 152 if (!len) { 153 kfree(rtable); 154 return -1; 155 } 156 for (loop = 0; loop < len; loop++) { 157 if ((*cur_slot)->number == rtable->slots[loop].slot && 158 (*cur_slot)->bus == rtable->slots[loop].bus) { 159 (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn); 160 for (i = 0; i < 4; i++) 161 (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus, 162 (int) (*cur_slot)->device, i); 163 164 debug("(*cur_slot)->irq[0] = %x\n", 165 (*cur_slot)->irq[0]); 166 debug("(*cur_slot)->irq[1] = %x\n", 167 (*cur_slot)->irq[1]); 168 debug("(*cur_slot)->irq[2] = %x\n", 169 (*cur_slot)->irq[2]); 170 debug("(*cur_slot)->irq[3] = %x\n", 171 (*cur_slot)->irq[3]); 172 173 debug("rtable->exclusive_irqs = %x\n", 174 rtable->exclusive_irqs); 175 debug("rtable->slots[loop].irq[0].bitmap = %x\n", 176 rtable->slots[loop].irq[0].bitmap); 177 debug("rtable->slots[loop].irq[1].bitmap = %x\n", 178 rtable->slots[loop].irq[1].bitmap); 179 debug("rtable->slots[loop].irq[2].bitmap = %x\n", 180 rtable->slots[loop].irq[2].bitmap); 181 debug("rtable->slots[loop].irq[3].bitmap = %x\n", 182 rtable->slots[loop].irq[3].bitmap); 183 184 debug("rtable->slots[loop].irq[0].link = %x\n", 185 rtable->slots[loop].irq[0].link); 186 debug("rtable->slots[loop].irq[1].link = %x\n", 187 rtable->slots[loop].irq[1].link); 188 debug("rtable->slots[loop].irq[2].link = %x\n", 189 rtable->slots[loop].irq[2].link); 190 debug("rtable->slots[loop].irq[3].link = %x\n", 191 rtable->slots[loop].irq[3].link); 192 debug("end of init_devno\n"); 193 kfree(rtable); 194 return 0; 195 } 196 } 197 198 kfree(rtable); 199 return -1; 200 } 201 202 static inline int power_on(struct slot *slot_cur) 203 { 204 u8 cmd = HPC_SLOT_ON; 205 int retval; 206 207 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 208 if (retval) { 209 err("power on failed\n"); 210 return retval; 211 } 212 if (CTLR_RESULT(slot_cur->ctrl->status)) { 213 err("command not completed successfully in power_on\n"); 214 return -EIO; 215 } 216 msleep(3000); /* For ServeRAID cards, and some 66 PCI */ 217 return 0; 218 } 219 220 static inline int power_off(struct slot *slot_cur) 221 { 222 u8 cmd = HPC_SLOT_OFF; 223 int retval; 224 225 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 226 if (retval) { 227 err("power off failed\n"); 228 return retval; 229 } 230 if (CTLR_RESULT(slot_cur->ctrl->status)) { 231 err("command not completed successfully in power_off\n"); 232 retval = -EIO; 233 } 234 return retval; 235 } 236 237 static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value) 238 { 239 int rc = 0; 240 struct slot *pslot; 241 u8 cmd = 0x00; /* avoid compiler warning */ 242 243 debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n", 244 (ulong) hotplug_slot, value); 245 ibmphp_lock_operations(); 246 247 248 if (hotplug_slot) { 249 switch (value) { 250 case HPC_SLOT_ATTN_OFF: 251 cmd = HPC_SLOT_ATTNOFF; 252 break; 253 case HPC_SLOT_ATTN_ON: 254 cmd = HPC_SLOT_ATTNON; 255 break; 256 case HPC_SLOT_ATTN_BLINK: 257 cmd = HPC_SLOT_BLINKLED; 258 break; 259 default: 260 rc = -ENODEV; 261 err("set_attention_status - Error : invalid input [%x]\n", 262 value); 263 break; 264 } 265 if (rc == 0) { 266 pslot = hotplug_slot->private; 267 if (pslot) 268 rc = ibmphp_hpc_writeslot(pslot, cmd); 269 else 270 rc = -ENODEV; 271 } 272 } else 273 rc = -ENODEV; 274 275 ibmphp_unlock_operations(); 276 277 debug("set_attention_status - Exit rc[%d]\n", rc); 278 return rc; 279 } 280 281 static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) 282 { 283 int rc = -ENODEV; 284 struct slot *pslot; 285 struct slot myslot; 286 287 debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 288 (ulong) hotplug_slot, (ulong) value); 289 290 ibmphp_lock_operations(); 291 if (hotplug_slot) { 292 pslot = hotplug_slot->private; 293 if (pslot) { 294 memcpy(&myslot, pslot, sizeof(struct slot)); 295 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 296 &(myslot.status)); 297 if (!rc) 298 rc = ibmphp_hpc_readslot(pslot, 299 READ_EXTSLOTSTATUS, 300 &(myslot.ext_status)); 301 if (!rc) 302 *value = SLOT_ATTN(myslot.status, 303 myslot.ext_status); 304 } 305 } 306 307 ibmphp_unlock_operations(); 308 debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value); 309 return rc; 310 } 311 312 static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) 313 { 314 int rc = -ENODEV; 315 struct slot *pslot; 316 struct slot myslot; 317 318 debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 319 (ulong) hotplug_slot, (ulong) value); 320 ibmphp_lock_operations(); 321 if (hotplug_slot) { 322 pslot = hotplug_slot->private; 323 if (pslot) { 324 memcpy(&myslot, pslot, sizeof(struct slot)); 325 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 326 &(myslot.status)); 327 if (!rc) 328 *value = SLOT_LATCH(myslot.status); 329 } 330 } 331 332 ibmphp_unlock_operations(); 333 debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n", 334 rc, rc, *value); 335 return rc; 336 } 337 338 339 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) 340 { 341 int rc = -ENODEV; 342 struct slot *pslot; 343 struct slot myslot; 344 345 debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 346 (ulong) hotplug_slot, (ulong) value); 347 ibmphp_lock_operations(); 348 if (hotplug_slot) { 349 pslot = hotplug_slot->private; 350 if (pslot) { 351 memcpy(&myslot, pslot, sizeof(struct slot)); 352 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 353 &(myslot.status)); 354 if (!rc) 355 *value = SLOT_PWRGD(myslot.status); 356 } 357 } 358 359 ibmphp_unlock_operations(); 360 debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n", 361 rc, rc, *value); 362 return rc; 363 } 364 365 static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value) 366 { 367 int rc = -ENODEV; 368 struct slot *pslot; 369 u8 present; 370 struct slot myslot; 371 372 debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n", 373 (ulong) hotplug_slot, (ulong) value); 374 ibmphp_lock_operations(); 375 if (hotplug_slot) { 376 pslot = hotplug_slot->private; 377 if (pslot) { 378 memcpy(&myslot, pslot, sizeof(struct slot)); 379 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 380 &(myslot.status)); 381 if (!rc) { 382 present = SLOT_PRESENT(myslot.status); 383 if (present == HPC_SLOT_EMPTY) 384 *value = 0; 385 else 386 *value = 1; 387 } 388 } 389 } 390 391 ibmphp_unlock_operations(); 392 debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value); 393 return rc; 394 } 395 396 static int get_max_bus_speed(struct slot *slot) 397 { 398 int rc; 399 u8 mode = 0; 400 enum pci_bus_speed speed; 401 struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus; 402 403 debug("%s - Entry slot[%p]\n", __func__, slot); 404 405 ibmphp_lock_operations(); 406 mode = slot->supported_bus_mode; 407 speed = slot->supported_speed; 408 ibmphp_unlock_operations(); 409 410 switch (speed) { 411 case BUS_SPEED_33: 412 break; 413 case BUS_SPEED_66: 414 if (mode == BUS_MODE_PCIX) 415 speed += 0x01; 416 break; 417 case BUS_SPEED_100: 418 case BUS_SPEED_133: 419 speed += 0x01; 420 break; 421 default: 422 /* Note (will need to change): there would be soon 256, 512 also */ 423 rc = -ENODEV; 424 } 425 426 if (!rc) 427 bus->max_bus_speed = speed; 428 429 debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed); 430 return rc; 431 } 432 433 /* 434 static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 *value, u8 flag) 435 { 436 int rc = -ENODEV; 437 struct slot *pslot; 438 struct slot myslot; 439 440 debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n", 441 (ulong)hotplug_slot, (ulong) value); 442 443 if (flag) 444 ibmphp_lock_operations(); 445 446 if (hotplug_slot && value) { 447 pslot = hotplug_slot->private; 448 if (pslot) { 449 memcpy(&myslot, pslot, sizeof(struct slot)); 450 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS, 451 &(myslot.status)); 452 453 if (!(SLOT_LATCH (myslot.status)) && 454 (SLOT_PRESENT (myslot.status))) { 455 rc = ibmphp_hpc_readslot(pslot, 456 READ_EXTSLOTSTATUS, 457 &(myslot.ext_status)); 458 if (!rc) 459 *value = SLOT_SPEED(myslot.ext_status); 460 } else 461 *value = MAX_ADAPTER_NONE; 462 } 463 } 464 465 if (flag) 466 ibmphp_unlock_operations(); 467 468 debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value); 469 return rc; 470 } 471 472 static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value) 473 { 474 int rc = -ENODEV; 475 struct slot *pslot = NULL; 476 477 debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot); 478 479 ibmphp_lock_operations(); 480 481 if (hotplug_slot) { 482 pslot = hotplug_slot->private; 483 if (pslot) { 484 rc = 0; 485 snprintf(value, 100, "Bus %x", pslot->bus); 486 } 487 } else 488 rc = -ENODEV; 489 490 ibmphp_unlock_operations(); 491 debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value); 492 return rc; 493 } 494 */ 495 496 /**************************************************************************** 497 * This routine will initialize the ops data structure used in the validate 498 * function. It will also power off empty slots that are powered on since BIOS 499 * leaves those on, albeit disconnected 500 ****************************************************************************/ 501 static int __init init_ops(void) 502 { 503 struct slot *slot_cur; 504 struct list_head *tmp; 505 int retval; 506 int rc; 507 508 list_for_each(tmp, &ibmphp_slot_head) { 509 slot_cur = list_entry(tmp, struct slot, ibm_slot_list); 510 511 if (!slot_cur) 512 return -ENODEV; 513 514 debug("BEFORE GETTING SLOT STATUS, slot # %x\n", 515 slot_cur->number); 516 if (slot_cur->ctrl->revision == 0xFF) 517 if (get_ctrl_revision(slot_cur, 518 &slot_cur->ctrl->revision)) 519 return -1; 520 521 if (slot_cur->bus_on->current_speed == 0xFF) 522 if (get_cur_bus_info(&slot_cur)) 523 return -1; 524 get_max_bus_speed(slot_cur); 525 526 if (slot_cur->ctrl->options == 0xFF) 527 if (get_hpc_options(slot_cur, &slot_cur->ctrl->options)) 528 return -1; 529 530 retval = slot_update(&slot_cur); 531 if (retval) 532 return retval; 533 534 debug("status = %x\n", slot_cur->status); 535 debug("ext_status = %x\n", slot_cur->ext_status); 536 debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status)); 537 debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status)); 538 debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status)); 539 540 if ((SLOT_PWRGD(slot_cur->status)) && 541 !(SLOT_PRESENT(slot_cur->status)) && 542 !(SLOT_LATCH(slot_cur->status))) { 543 debug("BEFORE POWER OFF COMMAND\n"); 544 rc = power_off(slot_cur); 545 if (rc) 546 return rc; 547 548 /* retval = slot_update(&slot_cur); 549 * if (retval) 550 * return retval; 551 * ibmphp_update_slot_info(slot_cur); 552 */ 553 } 554 } 555 init_flag = 0; 556 return 0; 557 } 558 559 /* This operation will check whether the slot is within the bounds and 560 * the operation is valid to perform on that slot 561 * Parameters: slot, operation 562 * Returns: 0 or error codes 563 */ 564 static int validate(struct slot *slot_cur, int opn) 565 { 566 int number; 567 int retval; 568 569 if (!slot_cur) 570 return -ENODEV; 571 number = slot_cur->number; 572 if ((number > max_slots) || (number < 0)) 573 return -EBADSLT; 574 debug("slot_number in validate is %d\n", slot_cur->number); 575 576 retval = slot_update(&slot_cur); 577 if (retval) 578 return retval; 579 580 switch (opn) { 581 case ENABLE: 582 if (!(SLOT_PWRGD(slot_cur->status)) && 583 (SLOT_PRESENT(slot_cur->status)) && 584 !(SLOT_LATCH(slot_cur->status))) 585 return 0; 586 break; 587 case DISABLE: 588 if ((SLOT_PWRGD(slot_cur->status)) && 589 (SLOT_PRESENT(slot_cur->status)) && 590 !(SLOT_LATCH(slot_cur->status))) 591 return 0; 592 break; 593 default: 594 break; 595 } 596 err("validate failed....\n"); 597 return -EINVAL; 598 } 599 600 /**************************************************************************** 601 * This routine is for updating the data structures in the hotplug core 602 * Parameters: struct slot 603 * Returns: 0 or error 604 ****************************************************************************/ 605 int ibmphp_update_slot_info(struct slot *slot_cur) 606 { 607 struct hotplug_slot_info *info; 608 struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus; 609 int rc; 610 u8 bus_speed; 611 u8 mode; 612 613 info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL); 614 if (!info) { 615 err("out of system memory\n"); 616 return -ENOMEM; 617 } 618 619 info->power_status = SLOT_PWRGD(slot_cur->status); 620 info->attention_status = SLOT_ATTN(slot_cur->status, 621 slot_cur->ext_status); 622 info->latch_status = SLOT_LATCH(slot_cur->status); 623 if (!SLOT_PRESENT(slot_cur->status)) { 624 info->adapter_status = 0; 625 /* info->max_adapter_speed_status = MAX_ADAPTER_NONE; */ 626 } else { 627 info->adapter_status = 1; 628 /* get_max_adapter_speed_1(slot_cur->hotplug_slot, 629 &info->max_adapter_speed_status, 0); */ 630 } 631 632 bus_speed = slot_cur->bus_on->current_speed; 633 mode = slot_cur->bus_on->current_bus_mode; 634 635 switch (bus_speed) { 636 case BUS_SPEED_33: 637 break; 638 case BUS_SPEED_66: 639 if (mode == BUS_MODE_PCIX) 640 bus_speed += 0x01; 641 else if (mode == BUS_MODE_PCI) 642 ; 643 else 644 bus_speed = PCI_SPEED_UNKNOWN; 645 break; 646 case BUS_SPEED_100: 647 case BUS_SPEED_133: 648 bus_speed += 0x01; 649 break; 650 default: 651 bus_speed = PCI_SPEED_UNKNOWN; 652 } 653 654 bus->cur_bus_speed = bus_speed; 655 // To do: bus_names 656 657 rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info); 658 kfree(info); 659 return rc; 660 } 661 662 663 /****************************************************************************** 664 * This function will return the pci_func, given bus and devfunc, or NULL. It 665 * is called from visit routines 666 ******************************************************************************/ 667 668 static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function) 669 { 670 struct pci_func *func_cur; 671 struct slot *slot_cur; 672 struct list_head *tmp; 673 list_for_each(tmp, &ibmphp_slot_head) { 674 slot_cur = list_entry(tmp, struct slot, ibm_slot_list); 675 if (slot_cur->func) { 676 func_cur = slot_cur->func; 677 while (func_cur) { 678 if ((func_cur->busno == busno) && 679 (func_cur->device == device) && 680 (func_cur->function == function)) 681 return func_cur; 682 func_cur = func_cur->next; 683 } 684 } 685 } 686 return NULL; 687 } 688 689 /************************************************************* 690 * This routine frees up memory used by struct slot, including 691 * the pointers to pci_func, bus, hotplug_slot, controller, 692 * and deregistering from the hotplug core 693 *************************************************************/ 694 static void free_slots(void) 695 { 696 struct slot *slot_cur; 697 struct list_head *tmp; 698 struct list_head *next; 699 700 debug("%s -- enter\n", __func__); 701 702 list_for_each_safe(tmp, next, &ibmphp_slot_head) { 703 slot_cur = list_entry(tmp, struct slot, ibm_slot_list); 704 pci_hp_deregister(slot_cur->hotplug_slot); 705 } 706 debug("%s -- exit\n", __func__); 707 } 708 709 static void ibm_unconfigure_device(struct pci_func *func) 710 { 711 struct pci_dev *temp; 712 u8 j; 713 714 debug("inside %s\n", __func__); 715 debug("func->device = %x, func->function = %x\n", 716 func->device, func->function); 717 debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0); 718 719 pci_lock_rescan_remove(); 720 721 for (j = 0; j < 0x08; j++) { 722 temp = pci_get_bus_and_slot(func->busno, (func->device << 3) | j); 723 if (temp) { 724 pci_stop_and_remove_bus_device(temp); 725 pci_dev_put(temp); 726 } 727 } 728 729 pci_dev_put(func->dev); 730 731 pci_unlock_rescan_remove(); 732 } 733 734 /* 735 * The following function is to fix kernel bug regarding 736 * getting bus entries, here we manually add those primary 737 * bus entries to kernel bus structure whenever apply 738 */ 739 static u8 bus_structure_fixup(u8 busno) 740 { 741 struct pci_bus *bus, *b; 742 struct pci_dev *dev; 743 u16 l; 744 745 if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno))) 746 return 1; 747 748 bus = kmalloc(sizeof(*bus), GFP_KERNEL); 749 if (!bus) { 750 err("%s - out of memory\n", __func__); 751 return 1; 752 } 753 dev = kmalloc(sizeof(*dev), GFP_KERNEL); 754 if (!dev) { 755 kfree(bus); 756 err("%s - out of memory\n", __func__); 757 return 1; 758 } 759 760 bus->number = busno; 761 bus->ops = ibmphp_pci_bus->ops; 762 dev->bus = bus; 763 for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) { 764 if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) && 765 (l != 0x0000) && (l != 0xffff)) { 766 debug("%s - Inside bus_structure_fixup()\n", 767 __func__); 768 b = pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL); 769 if (!b) 770 continue; 771 772 pci_bus_add_devices(b); 773 break; 774 } 775 } 776 777 kfree(dev); 778 kfree(bus); 779 780 return 0; 781 } 782 783 static int ibm_configure_device(struct pci_func *func) 784 { 785 struct pci_bus *child; 786 int num; 787 int flag = 0; /* this is to make sure we don't double scan the bus, 788 for bridged devices primarily */ 789 790 pci_lock_rescan_remove(); 791 792 if (!(bus_structure_fixup(func->busno))) 793 flag = 1; 794 if (func->dev == NULL) 795 func->dev = pci_get_bus_and_slot(func->busno, 796 PCI_DEVFN(func->device, func->function)); 797 798 if (func->dev == NULL) { 799 struct pci_bus *bus = pci_find_bus(0, func->busno); 800 if (!bus) 801 goto out; 802 803 num = pci_scan_slot(bus, 804 PCI_DEVFN(func->device, func->function)); 805 if (num) 806 pci_bus_add_devices(bus); 807 808 func->dev = pci_get_bus_and_slot(func->busno, 809 PCI_DEVFN(func->device, func->function)); 810 if (func->dev == NULL) { 811 err("ERROR... : pci_dev still NULL\n"); 812 goto out; 813 } 814 } 815 if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) { 816 pci_hp_add_bridge(func->dev); 817 child = func->dev->subordinate; 818 if (child) 819 pci_bus_add_devices(child); 820 } 821 822 out: 823 pci_unlock_rescan_remove(); 824 return 0; 825 } 826 827 /******************************************************* 828 * Returns whether the bus is empty or not 829 *******************************************************/ 830 static int is_bus_empty(struct slot *slot_cur) 831 { 832 int rc; 833 struct slot *tmp_slot; 834 u8 i = slot_cur->bus_on->slot_min; 835 836 while (i <= slot_cur->bus_on->slot_max) { 837 if (i == slot_cur->number) { 838 i++; 839 continue; 840 } 841 tmp_slot = ibmphp_get_slot_from_physical_num(i); 842 if (!tmp_slot) 843 return 0; 844 rc = slot_update(&tmp_slot); 845 if (rc) 846 return 0; 847 if (SLOT_PRESENT(tmp_slot->status) && 848 SLOT_PWRGD(tmp_slot->status)) 849 return 0; 850 i++; 851 } 852 return 1; 853 } 854 855 /*********************************************************** 856 * If the HPC permits and the bus currently empty, tries to set the 857 * bus speed and mode at the maximum card and bus capability 858 * Parameters: slot 859 * Returns: bus is set (0) or error code 860 ***********************************************************/ 861 static int set_bus(struct slot *slot_cur) 862 { 863 int rc; 864 u8 speed; 865 u8 cmd = 0x0; 866 int retval; 867 static struct pci_device_id ciobx[] = { 868 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) }, 869 { }, 870 }; 871 872 debug("%s - entry slot # %d\n", __func__, slot_cur->number); 873 if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) { 874 rc = slot_update(&slot_cur); 875 if (rc) 876 return rc; 877 speed = SLOT_SPEED(slot_cur->ext_status); 878 debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed); 879 switch (speed) { 880 case HPC_SLOT_SPEED_33: 881 cmd = HPC_BUS_33CONVMODE; 882 break; 883 case HPC_SLOT_SPEED_66: 884 if (SLOT_PCIX(slot_cur->ext_status)) { 885 if ((slot_cur->supported_speed >= BUS_SPEED_66) && 886 (slot_cur->supported_bus_mode == BUS_MODE_PCIX)) 887 cmd = HPC_BUS_66PCIXMODE; 888 else if (!SLOT_BUS_MODE(slot_cur->ext_status)) 889 /* if max slot/bus capability is 66 pci 890 and there's no bus mode mismatch, then 891 the adapter supports 66 pci */ 892 cmd = HPC_BUS_66CONVMODE; 893 else 894 cmd = HPC_BUS_33CONVMODE; 895 } else { 896 if (slot_cur->supported_speed >= BUS_SPEED_66) 897 cmd = HPC_BUS_66CONVMODE; 898 else 899 cmd = HPC_BUS_33CONVMODE; 900 } 901 break; 902 case HPC_SLOT_SPEED_133: 903 switch (slot_cur->supported_speed) { 904 case BUS_SPEED_33: 905 cmd = HPC_BUS_33CONVMODE; 906 break; 907 case BUS_SPEED_66: 908 if (slot_cur->supported_bus_mode == BUS_MODE_PCIX) 909 cmd = HPC_BUS_66PCIXMODE; 910 else 911 cmd = HPC_BUS_66CONVMODE; 912 break; 913 case BUS_SPEED_100: 914 cmd = HPC_BUS_100PCIXMODE; 915 break; 916 case BUS_SPEED_133: 917 /* This is to take care of the bug in CIOBX chip */ 918 if (pci_dev_present(ciobx)) 919 ibmphp_hpc_writeslot(slot_cur, 920 HPC_BUS_100PCIXMODE); 921 cmd = HPC_BUS_133PCIXMODE; 922 break; 923 default: 924 err("Wrong bus speed\n"); 925 return -ENODEV; 926 } 927 break; 928 default: 929 err("wrong slot speed\n"); 930 return -ENODEV; 931 } 932 debug("setting bus speed for slot %d, cmd %x\n", 933 slot_cur->number, cmd); 934 retval = ibmphp_hpc_writeslot(slot_cur, cmd); 935 if (retval) { 936 err("setting bus speed failed\n"); 937 return retval; 938 } 939 if (CTLR_RESULT(slot_cur->ctrl->status)) { 940 err("command not completed successfully in set_bus\n"); 941 return -EIO; 942 } 943 } 944 /* This is for x440, once Brandon fixes the firmware, 945 will not need this delay */ 946 msleep(1000); 947 debug("%s -Exit\n", __func__); 948 return 0; 949 } 950 951 /* This routine checks the bus limitations that the slot is on from the BIOS. 952 * This is used in deciding whether or not to power up the slot. 953 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on 954 * same bus) 955 * Parameters: slot 956 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus 957 */ 958 static int check_limitations(struct slot *slot_cur) 959 { 960 u8 i; 961 struct slot *tmp_slot; 962 u8 count = 0; 963 u8 limitation = 0; 964 965 for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) { 966 tmp_slot = ibmphp_get_slot_from_physical_num(i); 967 if (!tmp_slot) 968 return -ENODEV; 969 if ((SLOT_PWRGD(tmp_slot->status)) && 970 !(SLOT_CONNECT(tmp_slot->status))) 971 count++; 972 } 973 get_cur_bus_info(&slot_cur); 974 switch (slot_cur->bus_on->current_speed) { 975 case BUS_SPEED_33: 976 limitation = slot_cur->bus_on->slots_at_33_conv; 977 break; 978 case BUS_SPEED_66: 979 if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX) 980 limitation = slot_cur->bus_on->slots_at_66_pcix; 981 else 982 limitation = slot_cur->bus_on->slots_at_66_conv; 983 break; 984 case BUS_SPEED_100: 985 limitation = slot_cur->bus_on->slots_at_100_pcix; 986 break; 987 case BUS_SPEED_133: 988 limitation = slot_cur->bus_on->slots_at_133_pcix; 989 break; 990 } 991 992 if ((count + 1) > limitation) 993 return -EINVAL; 994 return 0; 995 } 996 997 static inline void print_card_capability(struct slot *slot_cur) 998 { 999 info("capability of the card is "); 1000 if ((slot_cur->ext_status & CARD_INFO) == PCIX133) 1001 info(" 133 MHz PCI-X\n"); 1002 else if ((slot_cur->ext_status & CARD_INFO) == PCIX66) 1003 info(" 66 MHz PCI-X\n"); 1004 else if ((slot_cur->ext_status & CARD_INFO) == PCI66) 1005 info(" 66 MHz PCI\n"); 1006 else 1007 info(" 33 MHz PCI\n"); 1008 1009 } 1010 1011 /* This routine will power on the slot, configure the device(s) and find the 1012 * drivers for them. 1013 * Parameters: hotplug_slot 1014 * Returns: 0 or failure codes 1015 */ 1016 static int enable_slot(struct hotplug_slot *hs) 1017 { 1018 int rc, i, rcpr; 1019 struct slot *slot_cur; 1020 u8 function; 1021 struct pci_func *tmp_func; 1022 1023 ibmphp_lock_operations(); 1024 1025 debug("ENABLING SLOT........\n"); 1026 slot_cur = hs->private; 1027 1028 rc = validate(slot_cur, ENABLE); 1029 if (rc) { 1030 err("validate function failed\n"); 1031 goto error_nopower; 1032 } 1033 1034 attn_LED_blink(slot_cur); 1035 1036 rc = set_bus(slot_cur); 1037 if (rc) { 1038 err("was not able to set the bus\n"); 1039 goto error_nopower; 1040 } 1041 1042 /*-----------------debugging------------------------------*/ 1043 get_cur_bus_info(&slot_cur); 1044 debug("the current bus speed right after set_bus = %x\n", 1045 slot_cur->bus_on->current_speed); 1046 /*----------------------------------------------------------*/ 1047 1048 rc = check_limitations(slot_cur); 1049 if (rc) { 1050 err("Adding this card exceeds the limitations of this bus.\n"); 1051 err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n"); 1052 err("Try hot-adding into another bus\n"); 1053 rc = -EINVAL; 1054 goto error_nopower; 1055 } 1056 1057 rc = power_on(slot_cur); 1058 1059 if (rc) { 1060 err("something wrong when powering up... please see below for details\n"); 1061 /* need to turn off before on, otherwise, blinking overwrites */ 1062 attn_off(slot_cur); 1063 attn_on(slot_cur); 1064 if (slot_update(&slot_cur)) { 1065 attn_off(slot_cur); 1066 attn_on(slot_cur); 1067 rc = -ENODEV; 1068 goto exit; 1069 } 1070 /* Check to see the error of why it failed */ 1071 if ((SLOT_POWER(slot_cur->status)) && 1072 !(SLOT_PWRGD(slot_cur->status))) 1073 err("power fault occurred trying to power up\n"); 1074 else if (SLOT_BUS_SPEED(slot_cur->status)) { 1075 err("bus speed mismatch occurred. please check current bus speed and card capability\n"); 1076 print_card_capability(slot_cur); 1077 } else if (SLOT_BUS_MODE(slot_cur->ext_status)) { 1078 err("bus mode mismatch occurred. please check current bus mode and card capability\n"); 1079 print_card_capability(slot_cur); 1080 } 1081 ibmphp_update_slot_info(slot_cur); 1082 goto exit; 1083 } 1084 debug("after power_on\n"); 1085 /*-----------------------debugging---------------------------*/ 1086 get_cur_bus_info(&slot_cur); 1087 debug("the current bus speed right after power_on = %x\n", 1088 slot_cur->bus_on->current_speed); 1089 /*----------------------------------------------------------*/ 1090 1091 rc = slot_update(&slot_cur); 1092 if (rc) 1093 goto error_power; 1094 1095 rc = -EINVAL; 1096 if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) { 1097 err("power fault occurred trying to power up...\n"); 1098 goto error_power; 1099 } 1100 if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) { 1101 err("bus speed mismatch occurred. please check current bus speed and card capability\n"); 1102 print_card_capability(slot_cur); 1103 goto error_power; 1104 } 1105 /* Don't think this case will happen after above checks... 1106 * but just in case, for paranoia sake */ 1107 if (!(SLOT_POWER(slot_cur->status))) { 1108 err("power on failed...\n"); 1109 goto error_power; 1110 } 1111 1112 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); 1113 if (!slot_cur->func) { 1114 /* We cannot do update_slot_info here, since no memory for 1115 * kmalloc n.e.ways, and update_slot_info allocates some */ 1116 err("out of system memory\n"); 1117 rc = -ENOMEM; 1118 goto error_power; 1119 } 1120 slot_cur->func->busno = slot_cur->bus; 1121 slot_cur->func->device = slot_cur->device; 1122 for (i = 0; i < 4; i++) 1123 slot_cur->func->irq[i] = slot_cur->irq[i]; 1124 1125 debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n", 1126 slot_cur->bus, slot_cur->device); 1127 1128 if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) { 1129 err("configure_card was unsuccessful...\n"); 1130 /* true because don't need to actually deallocate resources, 1131 * just remove references */ 1132 ibmphp_unconfigure_card(&slot_cur, 1); 1133 debug("after unconfigure_card\n"); 1134 slot_cur->func = NULL; 1135 rc = -ENOMEM; 1136 goto error_power; 1137 } 1138 1139 function = 0x00; 1140 do { 1141 tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device, 1142 function++); 1143 if (tmp_func && !(tmp_func->dev)) 1144 ibm_configure_device(tmp_func); 1145 } while (tmp_func); 1146 1147 attn_off(slot_cur); 1148 if (slot_update(&slot_cur)) { 1149 rc = -EFAULT; 1150 goto exit; 1151 } 1152 ibmphp_print_test(); 1153 rc = ibmphp_update_slot_info(slot_cur); 1154 exit: 1155 ibmphp_unlock_operations(); 1156 return rc; 1157 1158 error_nopower: 1159 attn_off(slot_cur); /* need to turn off if was blinking b4 */ 1160 attn_on(slot_cur); 1161 error_cont: 1162 rcpr = slot_update(&slot_cur); 1163 if (rcpr) { 1164 rc = rcpr; 1165 goto exit; 1166 } 1167 ibmphp_update_slot_info(slot_cur); 1168 goto exit; 1169 1170 error_power: 1171 attn_off(slot_cur); /* need to turn off if was blinking b4 */ 1172 attn_on(slot_cur); 1173 rcpr = power_off(slot_cur); 1174 if (rcpr) { 1175 rc = rcpr; 1176 goto exit; 1177 } 1178 goto error_cont; 1179 } 1180 1181 /************************************************************** 1182 * HOT REMOVING ADAPTER CARD * 1183 * INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE * 1184 * OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE * 1185 DISABLE POWER , * 1186 **************************************************************/ 1187 static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot) 1188 { 1189 struct slot *slot = hotplug_slot->private; 1190 int rc; 1191 1192 ibmphp_lock_operations(); 1193 rc = ibmphp_do_disable_slot(slot); 1194 ibmphp_unlock_operations(); 1195 return rc; 1196 } 1197 1198 int ibmphp_do_disable_slot(struct slot *slot_cur) 1199 { 1200 int rc; 1201 u8 flag; 1202 1203 debug("DISABLING SLOT...\n"); 1204 1205 if ((slot_cur == NULL) || (slot_cur->ctrl == NULL)) 1206 return -ENODEV; 1207 1208 flag = slot_cur->flag; 1209 slot_cur->flag = 1; 1210 1211 if (flag == 1) { 1212 rc = validate(slot_cur, DISABLE); 1213 /* checking if powered off already & valid slot # */ 1214 if (rc) 1215 goto error; 1216 } 1217 attn_LED_blink(slot_cur); 1218 1219 if (slot_cur->func == NULL) { 1220 /* We need this for functions that were there on bootup */ 1221 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL); 1222 if (!slot_cur->func) { 1223 err("out of system memory\n"); 1224 rc = -ENOMEM; 1225 goto error; 1226 } 1227 slot_cur->func->busno = slot_cur->bus; 1228 slot_cur->func->device = slot_cur->device; 1229 } 1230 1231 ibm_unconfigure_device(slot_cur->func); 1232 1233 /* 1234 * If we got here from latch suddenly opening on operating card or 1235 * a power fault, there's no power to the card, so cannot 1236 * read from it to determine what resources it occupied. This operation 1237 * is forbidden anyhow. The best we can do is remove it from kernel 1238 * lists at least */ 1239 1240 if (!flag) { 1241 attn_off(slot_cur); 1242 return 0; 1243 } 1244 1245 rc = ibmphp_unconfigure_card(&slot_cur, 0); 1246 slot_cur->func = NULL; 1247 debug("in disable_slot. after unconfigure_card\n"); 1248 if (rc) { 1249 err("could not unconfigure card.\n"); 1250 goto error; 1251 } 1252 1253 rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF); 1254 if (rc) 1255 goto error; 1256 1257 attn_off(slot_cur); 1258 rc = slot_update(&slot_cur); 1259 if (rc) 1260 goto exit; 1261 1262 rc = ibmphp_update_slot_info(slot_cur); 1263 ibmphp_print_test(); 1264 exit: 1265 return rc; 1266 1267 error: 1268 /* Need to turn off if was blinking b4 */ 1269 attn_off(slot_cur); 1270 attn_on(slot_cur); 1271 if (slot_update(&slot_cur)) { 1272 rc = -EFAULT; 1273 goto exit; 1274 } 1275 if (flag) 1276 ibmphp_update_slot_info(slot_cur); 1277 goto exit; 1278 } 1279 1280 struct hotplug_slot_ops ibmphp_hotplug_slot_ops = { 1281 .set_attention_status = set_attention_status, 1282 .enable_slot = enable_slot, 1283 .disable_slot = ibmphp_disable_slot, 1284 .hardware_test = NULL, 1285 .get_power_status = get_power_status, 1286 .get_attention_status = get_attention_status, 1287 .get_latch_status = get_latch_status, 1288 .get_adapter_status = get_adapter_present, 1289 /* .get_max_adapter_speed = get_max_adapter_speed, 1290 .get_bus_name_status = get_bus_name, 1291 */ 1292 }; 1293 1294 static void ibmphp_unload(void) 1295 { 1296 free_slots(); 1297 debug("after slots\n"); 1298 ibmphp_free_resources(); 1299 debug("after resources\n"); 1300 ibmphp_free_bus_info_queue(); 1301 debug("after bus info\n"); 1302 ibmphp_free_ebda_hpc_queue(); 1303 debug("after ebda hpc\n"); 1304 ibmphp_free_ebda_pci_rsrc_queue(); 1305 debug("after ebda pci rsrc\n"); 1306 kfree(ibmphp_pci_bus); 1307 } 1308 1309 static int __init ibmphp_init(void) 1310 { 1311 struct pci_bus *bus; 1312 int i = 0; 1313 int rc = 0; 1314 1315 init_flag = 1; 1316 1317 info(DRIVER_DESC " version: " DRIVER_VERSION "\n"); 1318 1319 ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL); 1320 if (!ibmphp_pci_bus) { 1321 err("out of memory\n"); 1322 rc = -ENOMEM; 1323 goto exit; 1324 } 1325 1326 bus = pci_find_bus(0, 0); 1327 if (!bus) { 1328 err("Can't find the root pci bus, can not continue\n"); 1329 rc = -ENODEV; 1330 goto error; 1331 } 1332 memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus)); 1333 1334 ibmphp_debug = debug; 1335 1336 ibmphp_hpc_initvars(); 1337 1338 for (i = 0; i < 16; i++) 1339 irqs[i] = 0; 1340 1341 rc = ibmphp_access_ebda(); 1342 if (rc) 1343 goto error; 1344 debug("after ibmphp_access_ebda()\n"); 1345 1346 rc = ibmphp_rsrc_init(); 1347 if (rc) 1348 goto error; 1349 debug("AFTER Resource & EBDA INITIALIZATIONS\n"); 1350 1351 max_slots = get_max_slots(); 1352 1353 rc = ibmphp_register_pci(); 1354 if (rc) 1355 goto error; 1356 1357 if (init_ops()) { 1358 rc = -ENODEV; 1359 goto error; 1360 } 1361 1362 ibmphp_print_test(); 1363 rc = ibmphp_hpc_start_poll_thread(); 1364 if (rc) 1365 goto error; 1366 1367 exit: 1368 return rc; 1369 1370 error: 1371 ibmphp_unload(); 1372 goto exit; 1373 } 1374 1375 static void __exit ibmphp_exit(void) 1376 { 1377 ibmphp_hpc_stop_poll_thread(); 1378 debug("after polling\n"); 1379 ibmphp_unload(); 1380 debug("done\n"); 1381 } 1382 1383 module_init(ibmphp_init); 1384 module_exit(ibmphp_exit); 1385