1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * Compaq Hot Plug Controller Driver
4  *
5  * Copyright (C) 1995,2001 Compaq Computer Corporation
6  * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
7  * Copyright (C) 2001 IBM Corp.
8  *
9  * All rights reserved.
10  *
11  * Send feedback to <greg@kroah.com>
12  *
13  * Jan 12, 2003 -	Added 66/100/133MHz PCI-X support,
14  *			Torben Mathiasen <torben.mathiasen@hp.com>
15  */
16 
17 #include <linux/module.h>
18 #include <linux/moduleparam.h>
19 #include <linux/kernel.h>
20 #include <linux/types.h>
21 #include <linux/proc_fs.h>
22 #include <linux/slab.h>
23 #include <linux/workqueue.h>
24 #include <linux/pci.h>
25 #include <linux/pci_hotplug.h>
26 #include <linux/init.h>
27 #include <linux/interrupt.h>
28 
29 #include <linux/uaccess.h>
30 
31 #include "cpqphp.h"
32 #include "cpqphp_nvram.h"
33 
34 
35 /* Global variables */
36 int cpqhp_debug;
37 int cpqhp_legacy_mode;
38 struct controller *cpqhp_ctrl_list;	/* = NULL */
39 struct pci_func *cpqhp_slot_list[256];
40 struct irq_routing_table *cpqhp_routing_table;
41 
42 /* local variables */
43 static void __iomem *smbios_table;
44 static void __iomem *smbios_start;
45 static void __iomem *cpqhp_rom_start;
46 static bool power_mode;
47 static bool debug;
48 static int initialized;
49 
50 #define DRIVER_VERSION	"0.9.8"
51 #define DRIVER_AUTHOR	"Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
52 #define DRIVER_DESC	"Compaq Hot Plug PCI Controller Driver"
53 
54 MODULE_AUTHOR(DRIVER_AUTHOR);
55 MODULE_DESCRIPTION(DRIVER_DESC);
56 MODULE_LICENSE("GPL");
57 
58 module_param(power_mode, bool, 0644);
59 MODULE_PARM_DESC(power_mode, "Power mode enabled or not");
60 
61 module_param(debug, bool, 0644);
62 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
63 
64 #define CPQHPC_MODULE_MINOR 208
65 
66 static inline int is_slot64bit(struct slot *slot)
67 {
68 	return (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06) ? 1 : 0;
69 }
70 
71 static inline int is_slot66mhz(struct slot *slot)
72 {
73 	return (readb(slot->p_sm_slot + SMBIOS_SLOT_TYPE) == 0x0E) ? 1 : 0;
74 }
75 
76 /**
77  * detect_SMBIOS_pointer - find the System Management BIOS Table in mem region.
78  * @begin: begin pointer for region to be scanned.
79  * @end: end pointer for region to be scanned.
80  *
81  * Returns pointer to the head of the SMBIOS tables (or %NULL).
82  */
83 static void __iomem *detect_SMBIOS_pointer(void __iomem *begin, void __iomem *end)
84 {
85 	void __iomem *fp;
86 	void __iomem *endp;
87 	u8 temp1, temp2, temp3, temp4;
88 	int status = 0;
89 
90 	endp = (end - sizeof(u32) + 1);
91 
92 	for (fp = begin; fp <= endp; fp += 16) {
93 		temp1 = readb(fp);
94 		temp2 = readb(fp+1);
95 		temp3 = readb(fp+2);
96 		temp4 = readb(fp+3);
97 		if (temp1 == '_' &&
98 		    temp2 == 'S' &&
99 		    temp3 == 'M' &&
100 		    temp4 == '_') {
101 			status = 1;
102 			break;
103 		}
104 	}
105 
106 	if (!status)
107 		fp = NULL;
108 
109 	dbg("Discovered SMBIOS Entry point at %p\n", fp);
110 
111 	return fp;
112 }
113 
114 /**
115  * init_SERR - Initializes the per slot SERR generation.
116  * @ctrl: controller to use
117  *
118  * For unexpected switch opens
119  */
120 static int init_SERR(struct controller *ctrl)
121 {
122 	u32 tempdword;
123 	u32 number_of_slots;
124 
125 	if (!ctrl)
126 		return 1;
127 
128 	tempdword = ctrl->first_slot;
129 
130 	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
131 	/* Loop through slots */
132 	while (number_of_slots) {
133 		writeb(0, ctrl->hpc_reg + SLOT_SERR);
134 		tempdword++;
135 		number_of_slots--;
136 	}
137 
138 	return 0;
139 }
140 
141 static int init_cpqhp_routing_table(void)
142 {
143 	int len;
144 
145 	cpqhp_routing_table = pcibios_get_irq_routing_table();
146 	if (cpqhp_routing_table == NULL)
147 		return -ENOMEM;
148 
149 	len = cpqhp_routing_table_length();
150 	if (len == 0) {
151 		kfree(cpqhp_routing_table);
152 		cpqhp_routing_table = NULL;
153 		return -1;
154 	}
155 
156 	return 0;
157 }
158 
159 /* nice debugging output */
160 static void pci_print_IRQ_route(void)
161 {
162 	int len;
163 	int loop;
164 	u8 tbus, tdevice, tslot;
165 
166 	len = cpqhp_routing_table_length();
167 
168 	dbg("bus dev func slot\n");
169 	for (loop = 0; loop < len; ++loop) {
170 		tbus = cpqhp_routing_table->slots[loop].bus;
171 		tdevice = cpqhp_routing_table->slots[loop].devfn;
172 		tslot = cpqhp_routing_table->slots[loop].slot;
173 		dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
174 
175 	}
176 	return;
177 }
178 
179 
180 /**
181  * get_subsequent_smbios_entry: get the next entry from bios table.
182  * @smbios_start: where to start in the SMBIOS table
183  * @smbios_table: location of the SMBIOS table
184  * @curr: %NULL or pointer to previously returned structure
185  *
186  * Gets the first entry if previous == NULL;
187  * otherwise, returns the next entry.
188  * Uses global SMBIOS Table pointer.
189  *
190  * Returns a pointer to an SMBIOS structure or NULL if none found.
191  */
192 static void __iomem *get_subsequent_smbios_entry(void __iomem *smbios_start,
193 						void __iomem *smbios_table,
194 						void __iomem *curr)
195 {
196 	u8 bail = 0;
197 	u8 previous_byte = 1;
198 	void __iomem *p_temp;
199 	void __iomem *p_max;
200 
201 	if (!smbios_table || !curr)
202 		return NULL;
203 
204 	/* set p_max to the end of the table */
205 	p_max = smbios_start + readw(smbios_table + ST_LENGTH);
206 
207 	p_temp = curr;
208 	p_temp += readb(curr + SMBIOS_GENERIC_LENGTH);
209 
210 	while ((p_temp < p_max) && !bail) {
211 		/* Look for the double NULL terminator
212 		 * The first condition is the previous byte
213 		 * and the second is the curr
214 		 */
215 		if (!previous_byte && !(readb(p_temp)))
216 			bail = 1;
217 
218 		previous_byte = readb(p_temp);
219 		p_temp++;
220 	}
221 
222 	if (p_temp < p_max)
223 		return p_temp;
224 	else
225 		return NULL;
226 }
227 
228 
229 /**
230  * get_SMBIOS_entry - return the requested SMBIOS entry or %NULL
231  * @smbios_start: where to start in the SMBIOS table
232  * @smbios_table: location of the SMBIOS table
233  * @type: SMBIOS structure type to be returned
234  * @previous: %NULL or pointer to previously returned structure
235  *
236  * Gets the first entry of the specified type if previous == %NULL;
237  * Otherwise, returns the next entry of the given type.
238  * Uses global SMBIOS Table pointer.
239  * Uses get_subsequent_smbios_entry.
240  *
241  * Returns a pointer to an SMBIOS structure or %NULL if none found.
242  */
243 static void __iomem *get_SMBIOS_entry(void __iomem *smbios_start,
244 					void __iomem *smbios_table,
245 					u8 type,
246 					void __iomem *previous)
247 {
248 	if (!smbios_table)
249 		return NULL;
250 
251 	if (!previous)
252 		previous = smbios_start;
253 	else
254 		previous = get_subsequent_smbios_entry(smbios_start,
255 					smbios_table, previous);
256 
257 	while (previous)
258 		if (readb(previous + SMBIOS_GENERIC_TYPE) != type)
259 			previous = get_subsequent_smbios_entry(smbios_start,
260 						smbios_table, previous);
261 		else
262 			break;
263 
264 	return previous;
265 }
266 
267 static int ctrl_slot_cleanup(struct controller *ctrl)
268 {
269 	struct slot *old_slot, *next_slot;
270 
271 	old_slot = ctrl->slot;
272 	ctrl->slot = NULL;
273 
274 	while (old_slot) {
275 		next_slot = old_slot->next;
276 		pci_hp_deregister(&old_slot->hotplug_slot);
277 		kfree(old_slot);
278 		old_slot = next_slot;
279 	}
280 
281 	cpqhp_remove_debugfs_files(ctrl);
282 
283 	/* Free IRQ associated with hot plug device */
284 	free_irq(ctrl->interrupt, ctrl);
285 	/* Unmap the memory */
286 	iounmap(ctrl->hpc_reg);
287 	/* Finally reclaim PCI mem */
288 	release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
289 			   pci_resource_len(ctrl->pci_dev, 0));
290 
291 	return 0;
292 }
293 
294 
295 /**
296  * get_slot_mapping - determine logical slot mapping for PCI device
297  *
298  * Won't work for more than one PCI-PCI bridge in a slot.
299  *
300  * @bus_num - bus number of PCI device
301  * @dev_num - device number of PCI device
302  * @slot - Pointer to u8 where slot number will	be returned
303  *
304  * Output:	SUCCESS or FAILURE
305  */
306 static int
307 get_slot_mapping(struct pci_bus *bus, u8 bus_num, u8 dev_num, u8 *slot)
308 {
309 	u32 work;
310 	long len;
311 	long loop;
312 
313 	u8 tbus, tdevice, tslot, bridgeSlot;
314 
315 	dbg("%s: %p, %d, %d, %p\n", __func__, bus, bus_num, dev_num, slot);
316 
317 	bridgeSlot = 0xFF;
318 
319 	len = cpqhp_routing_table_length();
320 	for (loop = 0; loop < len; ++loop) {
321 		tbus = cpqhp_routing_table->slots[loop].bus;
322 		tdevice = cpqhp_routing_table->slots[loop].devfn >> 3;
323 		tslot = cpqhp_routing_table->slots[loop].slot;
324 
325 		if ((tbus == bus_num) && (tdevice == dev_num)) {
326 			*slot = tslot;
327 			return 0;
328 		} else {
329 			/* Did not get a match on the target PCI device. Check
330 			 * if the current IRQ table entry is a PCI-to-PCI
331 			 * bridge device.  If so, and it's secondary bus
332 			 * matches the bus number for the target device, I need
333 			 * to save the bridge's slot number.  If I can not find
334 			 * an entry for the target device, I will have to
335 			 * assume it's on the other side of the bridge, and
336 			 * assign it the bridge's slot.
337 			 */
338 			bus->number = tbus;
339 			pci_bus_read_config_dword(bus, PCI_DEVFN(tdevice, 0),
340 						PCI_CLASS_REVISION, &work);
341 
342 			if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
343 				pci_bus_read_config_dword(bus,
344 							PCI_DEVFN(tdevice, 0),
345 							PCI_PRIMARY_BUS, &work);
346 				// See if bridge's secondary bus matches target bus.
347 				if (((work >> 8) & 0x000000FF) == (long) bus_num)
348 					bridgeSlot = tslot;
349 			}
350 		}
351 
352 	}
353 
354 	/* If we got here, we didn't find an entry in the IRQ mapping table for
355 	 * the target PCI device.  If we did determine that the target device
356 	 * is on the other side of a PCI-to-PCI bridge, return the slot number
357 	 * for the bridge.
358 	 */
359 	if (bridgeSlot != 0xFF) {
360 		*slot = bridgeSlot;
361 		return 0;
362 	}
363 	/* Couldn't find an entry in the routing table for this PCI device */
364 	return -1;
365 }
366 
367 
368 /**
369  * cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
370  * @ctrl: struct controller to use
371  * @func: PCI device/function info
372  * @status: LED control flag: 1 = LED on, 0 = LED off
373  */
374 static int
375 cpqhp_set_attention_status(struct controller *ctrl, struct pci_func *func,
376 				u32 status)
377 {
378 	u8 hp_slot;
379 
380 	if (func == NULL)
381 		return 1;
382 
383 	hp_slot = func->device - ctrl->slot_device_offset;
384 
385 	/* Wait for exclusive access to hardware */
386 	mutex_lock(&ctrl->crit_sect);
387 
388 	if (status == 1)
389 		amber_LED_on(ctrl, hp_slot);
390 	else if (status == 0)
391 		amber_LED_off(ctrl, hp_slot);
392 	else {
393 		/* Done with exclusive hardware access */
394 		mutex_unlock(&ctrl->crit_sect);
395 		return 1;
396 	}
397 
398 	set_SOGO(ctrl);
399 
400 	/* Wait for SOBS to be unset */
401 	wait_for_ctrl_irq(ctrl);
402 
403 	/* Done with exclusive hardware access */
404 	mutex_unlock(&ctrl->crit_sect);
405 
406 	return 0;
407 }
408 
409 
410 /**
411  * set_attention_status - Turns the Amber LED for a slot on or off
412  * @hotplug_slot: slot to change LED on
413  * @status: LED control flag
414  */
415 static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status)
416 {
417 	struct pci_func *slot_func;
418 	struct slot *slot = to_slot(hotplug_slot);
419 	struct controller *ctrl = slot->ctrl;
420 	u8 bus;
421 	u8 devfn;
422 	u8 device;
423 	u8 function;
424 
425 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
426 
427 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
428 		return -ENODEV;
429 
430 	device = devfn >> 3;
431 	function = devfn & 0x7;
432 	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
433 
434 	slot_func = cpqhp_slot_find(bus, device, function);
435 	if (!slot_func)
436 		return -ENODEV;
437 
438 	return cpqhp_set_attention_status(ctrl, slot_func, status);
439 }
440 
441 
442 static int process_SI(struct hotplug_slot *hotplug_slot)
443 {
444 	struct pci_func *slot_func;
445 	struct slot *slot = to_slot(hotplug_slot);
446 	struct controller *ctrl = slot->ctrl;
447 	u8 bus;
448 	u8 devfn;
449 	u8 device;
450 	u8 function;
451 
452 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
453 
454 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
455 		return -ENODEV;
456 
457 	device = devfn >> 3;
458 	function = devfn & 0x7;
459 	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
460 
461 	slot_func = cpqhp_slot_find(bus, device, function);
462 	if (!slot_func)
463 		return -ENODEV;
464 
465 	slot_func->bus = bus;
466 	slot_func->device = device;
467 	slot_func->function = function;
468 	slot_func->configured = 0;
469 	dbg("board_added(%p, %p)\n", slot_func, ctrl);
470 	return cpqhp_process_SI(ctrl, slot_func);
471 }
472 
473 
474 static int process_SS(struct hotplug_slot *hotplug_slot)
475 {
476 	struct pci_func *slot_func;
477 	struct slot *slot = to_slot(hotplug_slot);
478 	struct controller *ctrl = slot->ctrl;
479 	u8 bus;
480 	u8 devfn;
481 	u8 device;
482 	u8 function;
483 
484 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
485 
486 	if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
487 		return -ENODEV;
488 
489 	device = devfn >> 3;
490 	function = devfn & 0x7;
491 	dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
492 
493 	slot_func = cpqhp_slot_find(bus, device, function);
494 	if (!slot_func)
495 		return -ENODEV;
496 
497 	dbg("In %s, slot_func = %p, ctrl = %p\n", __func__, slot_func, ctrl);
498 	return cpqhp_process_SS(ctrl, slot_func);
499 }
500 
501 
502 static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value)
503 {
504 	struct slot *slot = to_slot(hotplug_slot);
505 	struct controller *ctrl = slot->ctrl;
506 
507 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
508 
509 	return cpqhp_hardware_test(ctrl, value);
510 }
511 
512 
513 static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
514 {
515 	struct slot *slot = to_slot(hotplug_slot);
516 	struct controller *ctrl = slot->ctrl;
517 
518 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
519 
520 	*value = get_slot_enabled(ctrl, slot);
521 	return 0;
522 }
523 
524 static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
525 {
526 	struct slot *slot = to_slot(hotplug_slot);
527 	struct controller *ctrl = slot->ctrl;
528 
529 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
530 
531 	*value = cpq_get_attention_status(ctrl, slot);
532 	return 0;
533 }
534 
535 static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
536 {
537 	struct slot *slot = to_slot(hotplug_slot);
538 	struct controller *ctrl = slot->ctrl;
539 
540 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
541 
542 	*value = cpq_get_latch_status(ctrl, slot);
543 
544 	return 0;
545 }
546 
547 static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value)
548 {
549 	struct slot *slot = to_slot(hotplug_slot);
550 	struct controller *ctrl = slot->ctrl;
551 
552 	dbg("%s - physical_slot = %s\n", __func__, slot_name(slot));
553 
554 	*value = get_presence_status(ctrl, slot);
555 
556 	return 0;
557 }
558 
559 static const struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
560 	.set_attention_status =	set_attention_status,
561 	.enable_slot =		process_SI,
562 	.disable_slot =		process_SS,
563 	.hardware_test =	hardware_test,
564 	.get_power_status =	get_power_status,
565 	.get_attention_status =	get_attention_status,
566 	.get_latch_status =	get_latch_status,
567 	.get_adapter_status =	get_adapter_status,
568 };
569 
570 #define SLOT_NAME_SIZE 10
571 
572 static int ctrl_slot_setup(struct controller *ctrl,
573 			void __iomem *smbios_start,
574 			void __iomem *smbios_table)
575 {
576 	struct slot *slot;
577 	struct pci_bus *bus = ctrl->pci_bus;
578 	u8 number_of_slots;
579 	u8 slot_device;
580 	u8 slot_number;
581 	u8 ctrl_slot;
582 	u32 tempdword;
583 	char name[SLOT_NAME_SIZE];
584 	void __iomem *slot_entry = NULL;
585 	int result;
586 
587 	dbg("%s\n", __func__);
588 
589 	tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
590 
591 	number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
592 	slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
593 	slot_number = ctrl->first_slot;
594 
595 	while (number_of_slots) {
596 		slot = kzalloc(sizeof(*slot), GFP_KERNEL);
597 		if (!slot) {
598 			result = -ENOMEM;
599 			goto error;
600 		}
601 
602 		slot->ctrl = ctrl;
603 		slot->bus = ctrl->bus;
604 		slot->device = slot_device;
605 		slot->number = slot_number;
606 		dbg("slot->number = %u\n", slot->number);
607 
608 		slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9,
609 					slot_entry);
610 
611 		while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) !=
612 				slot->number)) {
613 			slot_entry = get_SMBIOS_entry(smbios_start,
614 						smbios_table, 9, slot_entry);
615 		}
616 
617 		slot->p_sm_slot = slot_entry;
618 
619 		timer_setup(&slot->task_event, cpqhp_pushbutton_thread, 0);
620 		slot->task_event.expires = jiffies + 5 * HZ;
621 
622 		/*FIXME: these capabilities aren't used but if they are
623 		 *	 they need to be correctly implemented
624 		 */
625 		slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
626 		slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
627 
628 		if (is_slot64bit(slot))
629 			slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
630 		if (is_slot66mhz(slot))
631 			slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
632 		if (bus->cur_bus_speed == PCI_SPEED_66MHz)
633 			slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
634 
635 		ctrl_slot =
636 			slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
637 
638 		/* Check presence */
639 		slot->capabilities |=
640 			((((~tempdword) >> 23) |
641 			 ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
642 		/* Check the switch state */
643 		slot->capabilities |=
644 			((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
645 		/* Check the slot enable */
646 		slot->capabilities |=
647 			((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
648 
649 		/* register this slot with the hotplug pci core */
650 		snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
651 		slot->hotplug_slot.ops = &cpqphp_hotplug_slot_ops;
652 
653 		dbg("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n",
654 				slot->bus, slot->device,
655 				slot->number, ctrl->slot_device_offset,
656 				slot_number);
657 		result = pci_hp_register(&slot->hotplug_slot,
658 					 ctrl->pci_dev->bus,
659 					 slot->device,
660 					 name);
661 		if (result) {
662 			err("pci_hp_register failed with error %d\n", result);
663 			goto error_slot;
664 		}
665 
666 		slot->next = ctrl->slot;
667 		ctrl->slot = slot;
668 
669 		number_of_slots--;
670 		slot_device++;
671 		slot_number++;
672 	}
673 
674 	return 0;
675 error_slot:
676 	kfree(slot);
677 error:
678 	return result;
679 }
680 
681 static int one_time_init(void)
682 {
683 	int loop;
684 	int retval = 0;
685 
686 	if (initialized)
687 		return 0;
688 
689 	power_mode = 0;
690 
691 	retval = init_cpqhp_routing_table();
692 	if (retval)
693 		goto error;
694 
695 	if (cpqhp_debug)
696 		pci_print_IRQ_route();
697 
698 	dbg("Initialize + Start the notification mechanism\n");
699 
700 	retval = cpqhp_event_start_thread();
701 	if (retval)
702 		goto error;
703 
704 	dbg("Initialize slot lists\n");
705 	for (loop = 0; loop < 256; loop++)
706 		cpqhp_slot_list[loop] = NULL;
707 
708 	/* FIXME: We also need to hook the NMI handler eventually.
709 	 * this also needs to be worked with Christoph
710 	 * register_NMI_handler();
711 	 */
712 	/* Map rom address */
713 	cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
714 	if (!cpqhp_rom_start) {
715 		err("Could not ioremap memory region for ROM\n");
716 		retval = -EIO;
717 		goto error;
718 	}
719 
720 	/* Now, map the int15 entry point if we are on compaq specific
721 	 * hardware
722 	 */
723 	compaq_nvram_init(cpqhp_rom_start);
724 
725 	/* Map smbios table entry point structure */
726 	smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start,
727 					cpqhp_rom_start + ROM_PHY_LEN);
728 	if (!smbios_table) {
729 		err("Could not find the SMBIOS pointer in memory\n");
730 		retval = -EIO;
731 		goto error_rom_start;
732 	}
733 
734 	smbios_start = ioremap(readl(smbios_table + ST_ADDRESS),
735 					readw(smbios_table + ST_LENGTH));
736 	if (!smbios_start) {
737 		err("Could not ioremap memory region taken from SMBIOS values\n");
738 		retval = -EIO;
739 		goto error_smbios_start;
740 	}
741 
742 	initialized = 1;
743 
744 	return retval;
745 
746 error_smbios_start:
747 	iounmap(smbios_start);
748 error_rom_start:
749 	iounmap(cpqhp_rom_start);
750 error:
751 	return retval;
752 }
753 
754 static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
755 {
756 	u8 num_of_slots = 0;
757 	u8 hp_slot = 0;
758 	u8 device;
759 	u8 bus_cap;
760 	u16 temp_word;
761 	u16 vendor_id;
762 	u16 subsystem_vid;
763 	u16 subsystem_deviceid;
764 	u32 rc;
765 	struct controller *ctrl;
766 	struct pci_func *func;
767 	struct pci_bus *bus;
768 	int err;
769 
770 	err = pci_enable_device(pdev);
771 	if (err) {
772 		printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n",
773 			pci_name(pdev), err);
774 		return err;
775 	}
776 
777 	bus = pdev->subordinate;
778 	if (!bus) {
779 		pci_notice(pdev, "the device is not a bridge, skipping\n");
780 		rc = -ENODEV;
781 		goto err_disable_device;
782 	}
783 
784 	/* Need to read VID early b/c it's used to differentiate CPQ and INTC
785 	 * discovery
786 	 */
787 	vendor_id = pdev->vendor;
788 	if ((vendor_id != PCI_VENDOR_ID_COMPAQ) &&
789 	    (vendor_id != PCI_VENDOR_ID_INTEL)) {
790 		err(msg_HPC_non_compaq_or_intel);
791 		rc = -ENODEV;
792 		goto err_disable_device;
793 	}
794 	dbg("Vendor ID: %x\n", vendor_id);
795 
796 	dbg("revision: %d\n", pdev->revision);
797 	if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
798 		err(msg_HPC_rev_error);
799 		rc = -ENODEV;
800 		goto err_disable_device;
801 	}
802 
803 	/* Check for the proper subsystem IDs
804 	 * Intel uses a different SSID programming model than Compaq.
805 	 * For Intel, each SSID bit identifies a PHP capability.
806 	 * Also Intel HPCs may have RID=0.
807 	 */
808 	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL)) {
809 		err(msg_HPC_not_supported);
810 		rc = -ENODEV;
811 		goto err_disable_device;
812 	}
813 
814 	/* TODO: This code can be made to support non-Compaq or Intel
815 	 * subsystem IDs
816 	 */
817 	subsystem_vid = pdev->subsystem_vendor;
818 	dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
819 	if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
820 		err(msg_HPC_non_compaq_or_intel);
821 		rc = -ENODEV;
822 		goto err_disable_device;
823 	}
824 
825 	ctrl = kzalloc(sizeof(struct controller), GFP_KERNEL);
826 	if (!ctrl) {
827 		rc = -ENOMEM;
828 		goto err_disable_device;
829 	}
830 
831 	subsystem_deviceid = pdev->subsystem_device;
832 
833 	info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
834 
835 	/* Set Vendor ID, so it can be accessed later from other
836 	 * functions
837 	 */
838 	ctrl->vendor_id = vendor_id;
839 
840 	switch (subsystem_vid) {
841 	case PCI_VENDOR_ID_COMPAQ:
842 		if (pdev->revision >= 0x13) { /* CIOBX */
843 			ctrl->push_flag = 1;
844 			ctrl->slot_switch_type = 1;
845 			ctrl->push_button = 1;
846 			ctrl->pci_config_space = 1;
847 			ctrl->defeature_PHP = 1;
848 			ctrl->pcix_support = 1;
849 			ctrl->pcix_speed_capability = 1;
850 			pci_read_config_byte(pdev, 0x41, &bus_cap);
851 			if (bus_cap & 0x80) {
852 				dbg("bus max supports 133MHz PCI-X\n");
853 				bus->max_bus_speed = PCI_SPEED_133MHz_PCIX;
854 				break;
855 			}
856 			if (bus_cap & 0x40) {
857 				dbg("bus max supports 100MHz PCI-X\n");
858 				bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
859 				break;
860 			}
861 			if (bus_cap & 0x20) {
862 				dbg("bus max supports 66MHz PCI-X\n");
863 				bus->max_bus_speed = PCI_SPEED_66MHz_PCIX;
864 				break;
865 			}
866 			if (bus_cap & 0x10) {
867 				dbg("bus max supports 66MHz PCI\n");
868 				bus->max_bus_speed = PCI_SPEED_66MHz;
869 				break;
870 			}
871 
872 			break;
873 		}
874 
875 		switch (subsystem_deviceid) {
876 		case PCI_SUB_HPC_ID:
877 			/* Original 6500/7000 implementation */
878 			ctrl->slot_switch_type = 1;
879 			bus->max_bus_speed = PCI_SPEED_33MHz;
880 			ctrl->push_button = 0;
881 			ctrl->pci_config_space = 1;
882 			ctrl->defeature_PHP = 1;
883 			ctrl->pcix_support = 0;
884 			ctrl->pcix_speed_capability = 0;
885 			break;
886 		case PCI_SUB_HPC_ID2:
887 			/* First Pushbutton implementation */
888 			ctrl->push_flag = 1;
889 			ctrl->slot_switch_type = 1;
890 			bus->max_bus_speed = PCI_SPEED_33MHz;
891 			ctrl->push_button = 1;
892 			ctrl->pci_config_space = 1;
893 			ctrl->defeature_PHP = 1;
894 			ctrl->pcix_support = 0;
895 			ctrl->pcix_speed_capability = 0;
896 			break;
897 		case PCI_SUB_HPC_ID_INTC:
898 			/* Third party (6500/7000) */
899 			ctrl->slot_switch_type = 1;
900 			bus->max_bus_speed = PCI_SPEED_33MHz;
901 			ctrl->push_button = 0;
902 			ctrl->pci_config_space = 1;
903 			ctrl->defeature_PHP = 1;
904 			ctrl->pcix_support = 0;
905 			ctrl->pcix_speed_capability = 0;
906 			break;
907 		case PCI_SUB_HPC_ID3:
908 			/* First 66 Mhz implementation */
909 			ctrl->push_flag = 1;
910 			ctrl->slot_switch_type = 1;
911 			bus->max_bus_speed = PCI_SPEED_66MHz;
912 			ctrl->push_button = 1;
913 			ctrl->pci_config_space = 1;
914 			ctrl->defeature_PHP = 1;
915 			ctrl->pcix_support = 0;
916 			ctrl->pcix_speed_capability = 0;
917 			break;
918 		case PCI_SUB_HPC_ID4:
919 			/* First PCI-X implementation, 100MHz */
920 			ctrl->push_flag = 1;
921 			ctrl->slot_switch_type = 1;
922 			bus->max_bus_speed = PCI_SPEED_100MHz_PCIX;
923 			ctrl->push_button = 1;
924 			ctrl->pci_config_space = 1;
925 			ctrl->defeature_PHP = 1;
926 			ctrl->pcix_support = 1;
927 			ctrl->pcix_speed_capability = 0;
928 			break;
929 		default:
930 			err(msg_HPC_not_supported);
931 			rc = -ENODEV;
932 			goto err_free_ctrl;
933 		}
934 		break;
935 
936 	case PCI_VENDOR_ID_INTEL:
937 		/* Check for speed capability (0=33, 1=66) */
938 		if (subsystem_deviceid & 0x0001)
939 			bus->max_bus_speed = PCI_SPEED_66MHz;
940 		else
941 			bus->max_bus_speed = PCI_SPEED_33MHz;
942 
943 		/* Check for push button */
944 		if (subsystem_deviceid & 0x0002)
945 			ctrl->push_button = 0;
946 		else
947 			ctrl->push_button = 1;
948 
949 		/* Check for slot switch type (0=mechanical, 1=not mechanical) */
950 		if (subsystem_deviceid & 0x0004)
951 			ctrl->slot_switch_type = 0;
952 		else
953 			ctrl->slot_switch_type = 1;
954 
955 		/* PHP Status (0=De-feature PHP, 1=Normal operation) */
956 		if (subsystem_deviceid & 0x0008)
957 			ctrl->defeature_PHP = 1;	/* PHP supported */
958 		else
959 			ctrl->defeature_PHP = 0;	/* PHP not supported */
960 
961 		/* Alternate Base Address Register Interface
962 		 * (0=not supported, 1=supported)
963 		 */
964 		if (subsystem_deviceid & 0x0010)
965 			ctrl->alternate_base_address = 1;
966 		else
967 			ctrl->alternate_base_address = 0;
968 
969 		/* PCI Config Space Index (0=not supported, 1=supported) */
970 		if (subsystem_deviceid & 0x0020)
971 			ctrl->pci_config_space = 1;
972 		else
973 			ctrl->pci_config_space = 0;
974 
975 		/* PCI-X support */
976 		if (subsystem_deviceid & 0x0080) {
977 			ctrl->pcix_support = 1;
978 			if (subsystem_deviceid & 0x0040)
979 				/* 133MHz PCI-X if bit 7 is 1 */
980 				ctrl->pcix_speed_capability = 1;
981 			else
982 				/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
983 				/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
984 				ctrl->pcix_speed_capability = 0;
985 		} else {
986 			/* Conventional PCI */
987 			ctrl->pcix_support = 0;
988 			ctrl->pcix_speed_capability = 0;
989 		}
990 		break;
991 
992 	default:
993 		err(msg_HPC_not_supported);
994 		rc = -ENODEV;
995 		goto err_free_ctrl;
996 	}
997 
998 	/* Tell the user that we found one. */
999 	info("Initializing the PCI hot plug controller residing on PCI bus %d\n",
1000 					pdev->bus->number);
1001 
1002 	dbg("Hotplug controller capabilities:\n");
1003 	dbg("    speed_capability       %d\n", bus->max_bus_speed);
1004 	dbg("    slot_switch_type       %s\n", ctrl->slot_switch_type ?
1005 					"switch present" : "no switch");
1006 	dbg("    defeature_PHP          %s\n", ctrl->defeature_PHP ?
1007 					"PHP supported" : "PHP not supported");
1008 	dbg("    alternate_base_address %s\n", ctrl->alternate_base_address ?
1009 					"supported" : "not supported");
1010 	dbg("    pci_config_space       %s\n", ctrl->pci_config_space ?
1011 					"supported" : "not supported");
1012 	dbg("    pcix_speed_capability  %s\n", ctrl->pcix_speed_capability ?
1013 					"supported" : "not supported");
1014 	dbg("    pcix_support           %s\n", ctrl->pcix_support ?
1015 					"supported" : "not supported");
1016 
1017 	ctrl->pci_dev = pdev;
1018 	pci_set_drvdata(pdev, ctrl);
1019 
1020 	/* make our own copy of the pci bus structure,
1021 	 * as we like tweaking it a lot */
1022 	ctrl->pci_bus = kmemdup(pdev->bus, sizeof(*ctrl->pci_bus), GFP_KERNEL);
1023 	if (!ctrl->pci_bus) {
1024 		err("out of memory\n");
1025 		rc = -ENOMEM;
1026 		goto err_free_ctrl;
1027 	}
1028 
1029 	ctrl->bus = pdev->bus->number;
1030 	ctrl->rev = pdev->revision;
1031 	dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
1032 		PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
1033 
1034 	mutex_init(&ctrl->crit_sect);
1035 	init_waitqueue_head(&ctrl->queue);
1036 
1037 	/* initialize our threads if they haven't already been started up */
1038 	rc = one_time_init();
1039 	if (rc)
1040 		goto err_free_bus;
1041 
1042 	dbg("pdev = %p\n", pdev);
1043 	dbg("pci resource start %llx\n", (unsigned long long)pci_resource_start(pdev, 0));
1044 	dbg("pci resource len %llx\n", (unsigned long long)pci_resource_len(pdev, 0));
1045 
1046 	if (!request_mem_region(pci_resource_start(pdev, 0),
1047 				pci_resource_len(pdev, 0), MY_NAME)) {
1048 		err("cannot reserve MMIO region\n");
1049 		rc = -ENOMEM;
1050 		goto err_free_bus;
1051 	}
1052 
1053 	ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0),
1054 					pci_resource_len(pdev, 0));
1055 	if (!ctrl->hpc_reg) {
1056 		err("cannot remap MMIO region %llx @ %llx\n",
1057 		    (unsigned long long)pci_resource_len(pdev, 0),
1058 		    (unsigned long long)pci_resource_start(pdev, 0));
1059 		rc = -ENODEV;
1060 		goto err_free_mem_region;
1061 	}
1062 
1063 	/* Check for 66Mhz operation */
1064 	bus->cur_bus_speed = get_controller_speed(ctrl);
1065 
1066 
1067 	/********************************************************
1068 	 *
1069 	 *              Save configuration headers for this and
1070 	 *              subordinate PCI buses
1071 	 *
1072 	 ********************************************************/
1073 
1074 	/* find the physical slot number of the first hot plug slot */
1075 
1076 	/* Get slot won't work for devices behind bridges, but
1077 	 * in this case it will always be called for the "base"
1078 	 * bus/dev/func of a slot.
1079 	 * CS: this is leveraging the PCIIRQ routing code from the kernel
1080 	 * (pci-pc.c: get_irq_routing_table) */
1081 	rc = get_slot_mapping(ctrl->pci_bus, pdev->bus->number,
1082 				(readb(ctrl->hpc_reg + SLOT_MASK) >> 4),
1083 				&(ctrl->first_slot));
1084 	dbg("get_slot_mapping: first_slot = %d, returned = %d\n",
1085 				ctrl->first_slot, rc);
1086 	if (rc) {
1087 		err(msg_initialization_err, rc);
1088 		goto err_iounmap;
1089 	}
1090 
1091 	/* Store PCI Config Space for all devices on this bus */
1092 	rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
1093 	if (rc) {
1094 		err("%s: unable to save PCI configuration data, error %d\n",
1095 				__func__, rc);
1096 		goto err_iounmap;
1097 	}
1098 
1099 	/*
1100 	 * Get IO, memory, and IRQ resources for new devices
1101 	 */
1102 	/* The next line is required for cpqhp_find_available_resources */
1103 	ctrl->interrupt = pdev->irq;
1104 	if (ctrl->interrupt < 0x10) {
1105 		cpqhp_legacy_mode = 1;
1106 		dbg("System seems to be configured for Full Table Mapped MPS mode\n");
1107 	}
1108 
1109 	ctrl->cfgspc_irq = 0;
1110 	pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &ctrl->cfgspc_irq);
1111 
1112 	rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start);
1113 	ctrl->add_support = !rc;
1114 	if (rc) {
1115 		dbg("cpqhp_find_available_resources = 0x%x\n", rc);
1116 		err("unable to locate PCI configuration resources for hot plug add.\n");
1117 		goto err_iounmap;
1118 	}
1119 
1120 	/*
1121 	 * Finish setting up the hot plug ctrl device
1122 	 */
1123 	ctrl->slot_device_offset = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
1124 	dbg("NumSlots %d\n", ctrl->slot_device_offset);
1125 
1126 	ctrl->next_event = 0;
1127 
1128 	/* Setup the slot information structures */
1129 	rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
1130 	if (rc) {
1131 		err(msg_initialization_err, 6);
1132 		err("%s: unable to save PCI configuration data, error %d\n",
1133 			__func__, rc);
1134 		goto err_iounmap;
1135 	}
1136 
1137 	/* Mask all general input interrupts */
1138 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
1139 
1140 	/* set up the interrupt */
1141 	dbg("HPC interrupt = %d\n", ctrl->interrupt);
1142 	if (request_irq(ctrl->interrupt, cpqhp_ctrl_intr,
1143 			IRQF_SHARED, MY_NAME, ctrl)) {
1144 		err("Can't get irq %d for the hotplug pci controller\n",
1145 			ctrl->interrupt);
1146 		rc = -ENODEV;
1147 		goto err_iounmap;
1148 	}
1149 
1150 	/* Enable Shift Out interrupt and clear it, also enable SERR on power
1151 	 * fault
1152 	 */
1153 	temp_word = readw(ctrl->hpc_reg + MISC);
1154 	temp_word |= 0x4006;
1155 	writew(temp_word, ctrl->hpc_reg + MISC);
1156 
1157 	/* Changed 05/05/97 to clear all interrupts at start */
1158 	writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
1159 
1160 	ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
1161 
1162 	writel(0x0L, ctrl->hpc_reg + INT_MASK);
1163 
1164 	if (!cpqhp_ctrl_list) {
1165 		cpqhp_ctrl_list = ctrl;
1166 		ctrl->next = NULL;
1167 	} else {
1168 		ctrl->next = cpqhp_ctrl_list;
1169 		cpqhp_ctrl_list = ctrl;
1170 	}
1171 
1172 	/* turn off empty slots here unless command line option "ON" set
1173 	 * Wait for exclusive access to hardware
1174 	 */
1175 	mutex_lock(&ctrl->crit_sect);
1176 
1177 	num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
1178 
1179 	/* find first device number for the ctrl */
1180 	device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
1181 
1182 	while (num_of_slots) {
1183 		dbg("num_of_slots: %d\n", num_of_slots);
1184 		func = cpqhp_slot_find(ctrl->bus, device, 0);
1185 		if (!func)
1186 			break;
1187 
1188 		hp_slot = func->device - ctrl->slot_device_offset;
1189 		dbg("hp_slot: %d\n", hp_slot);
1190 
1191 		/* We have to save the presence info for these slots */
1192 		temp_word = ctrl->ctrl_int_comp >> 16;
1193 		func->presence_save = (temp_word >> hp_slot) & 0x01;
1194 		func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
1195 
1196 		if (ctrl->ctrl_int_comp & (0x1L << hp_slot))
1197 			func->switch_save = 0;
1198 		else
1199 			func->switch_save = 0x10;
1200 
1201 		if (!power_mode)
1202 			if (!func->is_a_board) {
1203 				green_LED_off(ctrl, hp_slot);
1204 				slot_disable(ctrl, hp_slot);
1205 			}
1206 
1207 		device++;
1208 		num_of_slots--;
1209 	}
1210 
1211 	if (!power_mode) {
1212 		set_SOGO(ctrl);
1213 		/* Wait for SOBS to be unset */
1214 		wait_for_ctrl_irq(ctrl);
1215 	}
1216 
1217 	rc = init_SERR(ctrl);
1218 	if (rc) {
1219 		err("init_SERR failed\n");
1220 		mutex_unlock(&ctrl->crit_sect);
1221 		goto err_free_irq;
1222 	}
1223 
1224 	/* Done with exclusive hardware access */
1225 	mutex_unlock(&ctrl->crit_sect);
1226 
1227 	cpqhp_create_debugfs_files(ctrl);
1228 
1229 	return 0;
1230 
1231 err_free_irq:
1232 	free_irq(ctrl->interrupt, ctrl);
1233 err_iounmap:
1234 	iounmap(ctrl->hpc_reg);
1235 err_free_mem_region:
1236 	release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
1237 err_free_bus:
1238 	kfree(ctrl->pci_bus);
1239 err_free_ctrl:
1240 	kfree(ctrl);
1241 err_disable_device:
1242 	pci_disable_device(pdev);
1243 	return rc;
1244 }
1245 
1246 static void __exit unload_cpqphpd(void)
1247 {
1248 	struct pci_func *next;
1249 	struct pci_func *TempSlot;
1250 	int loop;
1251 	u32 rc;
1252 	struct controller *ctrl;
1253 	struct controller *tctrl;
1254 	struct pci_resource *res;
1255 	struct pci_resource *tres;
1256 
1257 	rc = compaq_nvram_store(cpqhp_rom_start);
1258 
1259 	ctrl = cpqhp_ctrl_list;
1260 
1261 	while (ctrl) {
1262 		if (ctrl->hpc_reg) {
1263 			u16 misc;
1264 			rc = read_slot_enable(ctrl);
1265 
1266 			writeb(0, ctrl->hpc_reg + SLOT_SERR);
1267 			writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
1268 
1269 			misc = readw(ctrl->hpc_reg + MISC);
1270 			misc &= 0xFFFD;
1271 			writew(misc, ctrl->hpc_reg + MISC);
1272 		}
1273 
1274 		ctrl_slot_cleanup(ctrl);
1275 
1276 		res = ctrl->io_head;
1277 		while (res) {
1278 			tres = res;
1279 			res = res->next;
1280 			kfree(tres);
1281 		}
1282 
1283 		res = ctrl->mem_head;
1284 		while (res) {
1285 			tres = res;
1286 			res = res->next;
1287 			kfree(tres);
1288 		}
1289 
1290 		res = ctrl->p_mem_head;
1291 		while (res) {
1292 			tres = res;
1293 			res = res->next;
1294 			kfree(tres);
1295 		}
1296 
1297 		res = ctrl->bus_head;
1298 		while (res) {
1299 			tres = res;
1300 			res = res->next;
1301 			kfree(tres);
1302 		}
1303 
1304 		kfree(ctrl->pci_bus);
1305 
1306 		tctrl = ctrl;
1307 		ctrl = ctrl->next;
1308 		kfree(tctrl);
1309 	}
1310 
1311 	for (loop = 0; loop < 256; loop++) {
1312 		next = cpqhp_slot_list[loop];
1313 		while (next != NULL) {
1314 			res = next->io_head;
1315 			while (res) {
1316 				tres = res;
1317 				res = res->next;
1318 				kfree(tres);
1319 			}
1320 
1321 			res = next->mem_head;
1322 			while (res) {
1323 				tres = res;
1324 				res = res->next;
1325 				kfree(tres);
1326 			}
1327 
1328 			res = next->p_mem_head;
1329 			while (res) {
1330 				tres = res;
1331 				res = res->next;
1332 				kfree(tres);
1333 			}
1334 
1335 			res = next->bus_head;
1336 			while (res) {
1337 				tres = res;
1338 				res = res->next;
1339 				kfree(tres);
1340 			}
1341 
1342 			TempSlot = next;
1343 			next = next->next;
1344 			kfree(TempSlot);
1345 		}
1346 	}
1347 
1348 	/* Stop the notification mechanism */
1349 	if (initialized)
1350 		cpqhp_event_stop_thread();
1351 
1352 	/* unmap the rom address */
1353 	if (cpqhp_rom_start)
1354 		iounmap(cpqhp_rom_start);
1355 	if (smbios_start)
1356 		iounmap(smbios_start);
1357 }
1358 
1359 static const struct pci_device_id hpcd_pci_tbl[] = {
1360 	{
1361 	/* handle any PCI Hotplug controller */
1362 	.class =        ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
1363 	.class_mask =   ~0,
1364 
1365 	/* no matter who makes it */
1366 	.vendor =       PCI_ANY_ID,
1367 	.device =       PCI_ANY_ID,
1368 	.subvendor =    PCI_ANY_ID,
1369 	.subdevice =    PCI_ANY_ID,
1370 
1371 	}, { /* end: all zeroes */ }
1372 };
1373 
1374 MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
1375 
1376 static struct pci_driver cpqhpc_driver = {
1377 	.name =		"compaq_pci_hotplug",
1378 	.id_table =	hpcd_pci_tbl,
1379 	.probe =	cpqhpc_probe,
1380 	/* remove:	cpqhpc_remove_one, */
1381 };
1382 
1383 static int __init cpqhpc_init(void)
1384 {
1385 	int result;
1386 
1387 	cpqhp_debug = debug;
1388 
1389 	info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
1390 	cpqhp_initialize_debugfs();
1391 	result = pci_register_driver(&cpqhpc_driver);
1392 	dbg("pci_register_driver = %d\n", result);
1393 	return result;
1394 }
1395 
1396 static void __exit cpqhpc_cleanup(void)
1397 {
1398 	dbg("unload_cpqphpd()\n");
1399 	unload_cpqphpd();
1400 
1401 	dbg("pci_unregister_driver\n");
1402 	pci_unregister_driver(&cpqhpc_driver);
1403 	cpqhp_shutdown_debugfs();
1404 }
1405 
1406 module_init(cpqhpc_init);
1407 module_exit(cpqhpc_cleanup);
1408