xref: /openbmc/linux/drivers/pci/hotplug/Kconfig (revision da547d77)
1#
2# PCI Hotplug support
3#
4
5menu "PCI Hotplug Support"
6
7config HOTPLUG_PCI
8	tristate "Support for PCI Hotplug (EXPERIMENTAL)"
9	depends on PCI && EXPERIMENTAL && HOTPLUG
10	---help---
11	  Say Y here if you have a motherboard with a PCI Hotplug controller.
12	  This allows you to add and remove PCI cards while the machine is
13	  powered up and running.
14
15	  To compile this driver as a module, choose M here: the
16	  module will be called pci_hotplug.
17
18	  When in doubt, say N.
19
20config HOTPLUG_PCI_FAKE
21	tristate "Fake PCI Hotplug driver"
22	depends on HOTPLUG_PCI
23	help
24	  Say Y here if you want to use the fake PCI hotplug driver. It can
25	  be used to simulate PCI hotplug events if even if your system is
26	  not PCI hotplug capable.
27
28	  This driver will "emulate" removing PCI devices from the system.
29	  If the "power" file is written to with "0" then the specified PCI
30	  device will be completely removed from the kernel.
31
32	  WARNING, this does NOT turn off the power to the PCI device.
33	  This is a "logical" removal, not a physical or electrical
34	  removal.
35
36	  Use this module at your own risk.  You have been warned!
37
38	  To compile this driver as a module, choose M here: the
39	  module will be called fakephp.
40
41	  When in doubt, say N.
42
43config HOTPLUG_PCI_COMPAQ
44	tristate "Compaq PCI Hotplug driver"
45	depends on HOTPLUG_PCI && X86 && PCI_BIOS
46	help
47	  Say Y here if you have a motherboard with a Compaq PCI Hotplug
48	  controller.
49
50	  To compile this driver as a module, choose M here: the
51	  module will be called cpqphp.
52
53	  When in doubt, say N.
54
55config HOTPLUG_PCI_COMPAQ_NVRAM
56	bool "Save configuration into NVRAM on Compaq servers"
57	depends on HOTPLUG_PCI_COMPAQ
58	help
59	  Say Y here if you have a Compaq server that has a PCI Hotplug
60	  controller.  This will allow the PCI Hotplug driver to store the PCI
61	  system configuration options in NVRAM.
62
63	  When in doubt, say N.
64
65config HOTPLUG_PCI_IBM
66	tristate "IBM PCI Hotplug driver"
67	depends on HOTPLUG_PCI && X86_IO_APIC && X86 && PCI_BIOS
68	help
69	  Say Y here if you have a motherboard with a IBM PCI Hotplug
70	  controller.
71
72	  To compile this driver as a module, choose M here: the
73	  module will be called ibmphp.
74
75	  When in doubt, say N.
76
77config HOTPLUG_PCI_ACPI
78	tristate "ACPI PCI Hotplug driver"
79	depends on (!ACPI_DOCK && ACPI && HOTPLUG_PCI) || (ACPI_DOCK && HOTPLUG_PCI)
80	help
81	  Say Y here if you have a system that supports PCI Hotplug using
82	  ACPI.
83
84	  To compile this driver as a module, choose M here: the
85	  module will be called acpiphp.
86
87	  When in doubt, say N.
88
89config HOTPLUG_PCI_ACPI_IBM
90	tristate "ACPI PCI Hotplug driver IBM extensions"
91	depends on HOTPLUG_PCI_ACPI
92	help
93	  Say Y here if you have an IBM system that supports PCI Hotplug using
94	  ACPI.
95
96	  To compile this driver as a module, choose M here: the
97	  module will be called acpiphp_ibm.
98
99	  When in doubt, say N.
100
101config HOTPLUG_PCI_CPCI
102	bool "CompactPCI Hotplug driver"
103	depends on HOTPLUG_PCI
104	help
105	  Say Y here if you have a CompactPCI system card with CompactPCI
106	  hotswap support per the PICMG 2.1 specification.
107
108	  When in doubt, say N.
109
110config HOTPLUG_PCI_CPCI_ZT5550
111	tristate "Ziatech ZT5550 CompactPCI Hotplug driver"
112	depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
113	help
114	  Say Y here if you have an Performance Technologies (formerly Intel,
115          formerly just Ziatech) Ziatech ZT5550 CompactPCI system card.
116
117	  To compile this driver as a module, choose M here: the
118	  module will be called cpcihp_zt5550.
119
120	  When in doubt, say N.
121
122config HOTPLUG_PCI_CPCI_GENERIC
123	tristate "Generic port I/O CompactPCI Hotplug driver"
124	depends on HOTPLUG_PCI && HOTPLUG_PCI_CPCI && X86
125	help
126	  Say Y here if you have a CompactPCI system card that exposes the #ENUM
127	  hotswap signal as a bit in a system register that can be read through
128	  standard port I/O.
129
130	  To compile this driver as a module, choose M here: the
131	  module will be called cpcihp_generic.
132
133	  When in doubt, say N.
134
135config HOTPLUG_PCI_SHPC
136	tristate "SHPC PCI Hotplug driver"
137	depends on HOTPLUG_PCI
138	help
139	  Say Y here if you have a motherboard with a SHPC PCI Hotplug
140	  controller.
141
142	  To compile this driver as a module, choose M here: the
143	  module will be called shpchp.
144
145	  When in doubt, say N.
146
147config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
148	bool "Use polling mechanism for hot-plug events (for testing purpose)"
149	depends on HOTPLUG_PCI_SHPC
150	help
151	  Say Y here if you want to use the polling mechanism for hot-plug
152	  events for early platform testing.
153
154	  When in doubt, say N.
155
156config HOTPLUG_PCI_RPA
157	tristate "RPA PCI Hotplug driver"
158	depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
159	help
160	  Say Y here if you have a a RPA system that supports PCI Hotplug.
161
162	  To compile this driver as a module, choose M here: the
163	  module will be called rpaphp.
164
165	  When in doubt, say N.
166
167config HOTPLUG_PCI_RPA_DLPAR
168	tristate "RPA Dynamic Logical Partitioning for I/O slots"
169	depends on HOTPLUG_PCI_RPA
170	help
171	  Say Y here if your system supports Dynamic Logical Partitioning
172	  for I/O slots.
173
174	  To compile this driver as a module, choose M here: the
175	  module will be called rpadlpar_io.
176
177 	  When in doubt, say N.
178
179config HOTPLUG_PCI_SGI
180	tristate "SGI PCI Hotplug Support"
181	depends on HOTPLUG_PCI && (IA64_SGI_SN2 || IA64_GENERIC)
182	help
183	  Say Y here if you want to use the SGI Altix Hotplug
184	  Driver for PCI devices.
185
186	  When in doubt, say N.
187
188endmenu
189
190