xref: /openbmc/linux/drivers/pci/ats.c (revision e1e38ea1)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * PCI Express I/O Virtualization (IOV) support
4  *   Address Translation Service 1.0
5  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
6  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
7  *
8  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
9  * Copyright (C) 2011 Advanced Micro Devices,
10  */
11 
12 #include <linux/export.h>
13 #include <linux/pci-ats.h>
14 #include <linux/pci.h>
15 #include <linux/slab.h>
16 
17 #include "pci.h"
18 
19 void pci_ats_init(struct pci_dev *dev)
20 {
21 	int pos;
22 
23 	if (pci_ats_disabled())
24 		return;
25 
26 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
27 	if (!pos)
28 		return;
29 
30 	dev->ats_cap = pos;
31 }
32 
33 /**
34  * pci_enable_ats - enable the ATS capability
35  * @dev: the PCI device
36  * @ps: the IOMMU page shift
37  *
38  * Returns 0 on success, or negative on failure.
39  */
40 int pci_enable_ats(struct pci_dev *dev, int ps)
41 {
42 	u16 ctrl;
43 	struct pci_dev *pdev;
44 
45 	if (!dev->ats_cap)
46 		return -EINVAL;
47 
48 	if (WARN_ON(dev->ats_enabled))
49 		return -EBUSY;
50 
51 	if (ps < PCI_ATS_MIN_STU)
52 		return -EINVAL;
53 
54 	/*
55 	 * Note that enabling ATS on a VF fails unless it's already enabled
56 	 * with the same STU on the PF.
57 	 */
58 	ctrl = PCI_ATS_CTRL_ENABLE;
59 	if (dev->is_virtfn) {
60 		pdev = pci_physfn(dev);
61 		if (pdev->ats_stu != ps)
62 			return -EINVAL;
63 
64 		atomic_inc(&pdev->ats_ref_cnt);  /* count enabled VFs */
65 	} else {
66 		dev->ats_stu = ps;
67 		ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
68 	}
69 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
70 
71 	dev->ats_enabled = 1;
72 	return 0;
73 }
74 EXPORT_SYMBOL_GPL(pci_enable_ats);
75 
76 /**
77  * pci_disable_ats - disable the ATS capability
78  * @dev: the PCI device
79  */
80 void pci_disable_ats(struct pci_dev *dev)
81 {
82 	struct pci_dev *pdev;
83 	u16 ctrl;
84 
85 	if (WARN_ON(!dev->ats_enabled))
86 		return;
87 
88 	if (atomic_read(&dev->ats_ref_cnt))
89 		return;		/* VFs still enabled */
90 
91 	if (dev->is_virtfn) {
92 		pdev = pci_physfn(dev);
93 		atomic_dec(&pdev->ats_ref_cnt);
94 	}
95 
96 	pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
97 	ctrl &= ~PCI_ATS_CTRL_ENABLE;
98 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
99 
100 	dev->ats_enabled = 0;
101 }
102 EXPORT_SYMBOL_GPL(pci_disable_ats);
103 
104 void pci_restore_ats_state(struct pci_dev *dev)
105 {
106 	u16 ctrl;
107 
108 	if (!dev->ats_enabled)
109 		return;
110 
111 	ctrl = PCI_ATS_CTRL_ENABLE;
112 	if (!dev->is_virtfn)
113 		ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
114 	pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
115 }
116 EXPORT_SYMBOL_GPL(pci_restore_ats_state);
117 
118 /**
119  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
120  * @dev: the PCI device
121  *
122  * Returns the queue depth on success, or negative on failure.
123  *
124  * The ATS spec uses 0 in the Invalidate Queue Depth field to
125  * indicate that the function can accept 32 Invalidate Request.
126  * But here we use the `real' values (i.e. 1~32) for the Queue
127  * Depth; and 0 indicates the function shares the Queue with
128  * other functions (doesn't exclusively own a Queue).
129  */
130 int pci_ats_queue_depth(struct pci_dev *dev)
131 {
132 	u16 cap;
133 
134 	if (!dev->ats_cap)
135 		return -EINVAL;
136 
137 	if (dev->is_virtfn)
138 		return 0;
139 
140 	pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
141 	return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
142 }
143 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
144 
145 #ifdef CONFIG_PCI_PRI
146 /**
147  * pci_enable_pri - Enable PRI capability
148  * @ pdev: PCI device structure
149  *
150  * Returns 0 on success, negative value on error
151  */
152 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
153 {
154 	u16 control, status;
155 	u32 max_requests;
156 	int pos;
157 
158 	if (WARN_ON(pdev->pri_enabled))
159 		return -EBUSY;
160 
161 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
162 	if (!pos)
163 		return -EINVAL;
164 
165 	pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
166 	if (!(status & PCI_PRI_STATUS_STOPPED))
167 		return -EBUSY;
168 
169 	pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
170 	reqs = min(max_requests, reqs);
171 	pdev->pri_reqs_alloc = reqs;
172 	pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
173 
174 	control = PCI_PRI_CTRL_ENABLE;
175 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
176 
177 	pdev->pri_enabled = 1;
178 
179 	return 0;
180 }
181 EXPORT_SYMBOL_GPL(pci_enable_pri);
182 
183 /**
184  * pci_disable_pri - Disable PRI capability
185  * @pdev: PCI device structure
186  *
187  * Only clears the enabled-bit, regardless of its former value
188  */
189 void pci_disable_pri(struct pci_dev *pdev)
190 {
191 	u16 control;
192 	int pos;
193 
194 	if (WARN_ON(!pdev->pri_enabled))
195 		return;
196 
197 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
198 	if (!pos)
199 		return;
200 
201 	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
202 	control &= ~PCI_PRI_CTRL_ENABLE;
203 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
204 
205 	pdev->pri_enabled = 0;
206 }
207 EXPORT_SYMBOL_GPL(pci_disable_pri);
208 
209 /**
210  * pci_restore_pri_state - Restore PRI
211  * @pdev: PCI device structure
212  */
213 void pci_restore_pri_state(struct pci_dev *pdev)
214 {
215 	u16 control = PCI_PRI_CTRL_ENABLE;
216 	u32 reqs = pdev->pri_reqs_alloc;
217 	int pos;
218 
219 	if (!pdev->pri_enabled)
220 		return;
221 
222 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
223 	if (!pos)
224 		return;
225 
226 	pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
227 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
228 }
229 EXPORT_SYMBOL_GPL(pci_restore_pri_state);
230 
231 /**
232  * pci_reset_pri - Resets device's PRI state
233  * @pdev: PCI device structure
234  *
235  * The PRI capability must be disabled before this function is called.
236  * Returns 0 on success, negative value on error.
237  */
238 int pci_reset_pri(struct pci_dev *pdev)
239 {
240 	u16 control;
241 	int pos;
242 
243 	if (WARN_ON(pdev->pri_enabled))
244 		return -EBUSY;
245 
246 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
247 	if (!pos)
248 		return -EINVAL;
249 
250 	control = PCI_PRI_CTRL_RESET;
251 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
252 
253 	return 0;
254 }
255 EXPORT_SYMBOL_GPL(pci_reset_pri);
256 #endif /* CONFIG_PCI_PRI */
257 
258 #ifdef CONFIG_PCI_PASID
259 /**
260  * pci_enable_pasid - Enable the PASID capability
261  * @pdev: PCI device structure
262  * @features: Features to enable
263  *
264  * Returns 0 on success, negative value on error. This function checks
265  * whether the features are actually supported by the device and returns
266  * an error if not.
267  */
268 int pci_enable_pasid(struct pci_dev *pdev, int features)
269 {
270 	u16 control, supported;
271 	int pos;
272 
273 	if (WARN_ON(pdev->pasid_enabled))
274 		return -EBUSY;
275 
276 	if (!pdev->eetlp_prefix_path)
277 		return -EINVAL;
278 
279 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
280 	if (!pos)
281 		return -EINVAL;
282 
283 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
284 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
285 
286 	/* User wants to enable anything unsupported? */
287 	if ((supported & features) != features)
288 		return -EINVAL;
289 
290 	control = PCI_PASID_CTRL_ENABLE | features;
291 	pdev->pasid_features = features;
292 
293 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
294 
295 	pdev->pasid_enabled = 1;
296 
297 	return 0;
298 }
299 EXPORT_SYMBOL_GPL(pci_enable_pasid);
300 
301 /**
302  * pci_disable_pasid - Disable the PASID capability
303  * @pdev: PCI device structure
304  */
305 void pci_disable_pasid(struct pci_dev *pdev)
306 {
307 	u16 control = 0;
308 	int pos;
309 
310 	if (WARN_ON(!pdev->pasid_enabled))
311 		return;
312 
313 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
314 	if (!pos)
315 		return;
316 
317 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
318 
319 	pdev->pasid_enabled = 0;
320 }
321 EXPORT_SYMBOL_GPL(pci_disable_pasid);
322 
323 /**
324  * pci_restore_pasid_state - Restore PASID capabilities
325  * @pdev: PCI device structure
326  */
327 void pci_restore_pasid_state(struct pci_dev *pdev)
328 {
329 	u16 control;
330 	int pos;
331 
332 	if (!pdev->pasid_enabled)
333 		return;
334 
335 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
336 	if (!pos)
337 		return;
338 
339 	control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
340 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
341 }
342 EXPORT_SYMBOL_GPL(pci_restore_pasid_state);
343 
344 /**
345  * pci_pasid_features - Check which PASID features are supported
346  * @pdev: PCI device structure
347  *
348  * Returns a negative value when no PASI capability is present.
349  * Otherwise is returns a bitmask with supported features. Current
350  * features reported are:
351  * PCI_PASID_CAP_EXEC - Execute permission supported
352  * PCI_PASID_CAP_PRIV - Privileged mode supported
353  */
354 int pci_pasid_features(struct pci_dev *pdev)
355 {
356 	u16 supported;
357 	int pos;
358 
359 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
360 	if (!pos)
361 		return -EINVAL;
362 
363 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
364 
365 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
366 
367 	return supported;
368 }
369 EXPORT_SYMBOL_GPL(pci_pasid_features);
370 
371 #define PASID_NUMBER_SHIFT	8
372 #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
373 /**
374  * pci_max_pasid - Get maximum number of PASIDs supported by device
375  * @pdev: PCI device structure
376  *
377  * Returns negative value when PASID capability is not present.
378  * Otherwise it returns the numer of supported PASIDs.
379  */
380 int pci_max_pasids(struct pci_dev *pdev)
381 {
382 	u16 supported;
383 	int pos;
384 
385 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
386 	if (!pos)
387 		return -EINVAL;
388 
389 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
390 
391 	supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
392 
393 	return (1 << supported);
394 }
395 EXPORT_SYMBOL_GPL(pci_max_pasids);
396 #endif /* CONFIG_PCI_PASID */
397