xref: /openbmc/linux/drivers/pci/ats.c (revision 8b036556)
1 /*
2  * drivers/pci/ats.c
3  *
4  * Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
5  * Copyright (C) 2011 Advanced Micro Devices,
6  *
7  * PCI Express I/O Virtualization (IOV) support.
8  *   Address Translation Service 1.0
9  *   Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
10  *   PASID support added by Joerg Roedel <joerg.roedel@amd.com>
11  */
12 
13 #include <linux/export.h>
14 #include <linux/pci-ats.h>
15 #include <linux/pci.h>
16 #include <linux/slab.h>
17 
18 #include "pci.h"
19 
20 static int ats_alloc_one(struct pci_dev *dev, int ps)
21 {
22 	int pos;
23 	u16 cap;
24 	struct pci_ats *ats;
25 
26 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
27 	if (!pos)
28 		return -ENODEV;
29 
30 	ats = kzalloc(sizeof(*ats), GFP_KERNEL);
31 	if (!ats)
32 		return -ENOMEM;
33 
34 	ats->pos = pos;
35 	ats->stu = ps;
36 	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
37 	ats->qdep = PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
38 					    PCI_ATS_MAX_QDEP;
39 	dev->ats = ats;
40 
41 	return 0;
42 }
43 
44 static void ats_free_one(struct pci_dev *dev)
45 {
46 	kfree(dev->ats);
47 	dev->ats = NULL;
48 }
49 
50 /**
51  * pci_enable_ats - enable the ATS capability
52  * @dev: the PCI device
53  * @ps: the IOMMU page shift
54  *
55  * Returns 0 on success, or negative on failure.
56  */
57 int pci_enable_ats(struct pci_dev *dev, int ps)
58 {
59 	int rc;
60 	u16 ctrl;
61 
62 	BUG_ON(dev->ats && dev->ats->is_enabled);
63 
64 	if (ps < PCI_ATS_MIN_STU)
65 		return -EINVAL;
66 
67 	if (dev->is_physfn || dev->is_virtfn) {
68 		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
69 
70 		mutex_lock(&pdev->sriov->lock);
71 		if (pdev->ats)
72 			rc = pdev->ats->stu == ps ? 0 : -EINVAL;
73 		else
74 			rc = ats_alloc_one(pdev, ps);
75 
76 		if (!rc)
77 			pdev->ats->ref_cnt++;
78 		mutex_unlock(&pdev->sriov->lock);
79 		if (rc)
80 			return rc;
81 	}
82 
83 	if (!dev->is_physfn) {
84 		rc = ats_alloc_one(dev, ps);
85 		if (rc)
86 			return rc;
87 	}
88 
89 	ctrl = PCI_ATS_CTRL_ENABLE;
90 	if (!dev->is_virtfn)
91 		ctrl |= PCI_ATS_CTRL_STU(ps - PCI_ATS_MIN_STU);
92 	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
93 
94 	dev->ats->is_enabled = 1;
95 
96 	return 0;
97 }
98 EXPORT_SYMBOL_GPL(pci_enable_ats);
99 
100 /**
101  * pci_disable_ats - disable the ATS capability
102  * @dev: the PCI device
103  */
104 void pci_disable_ats(struct pci_dev *dev)
105 {
106 	u16 ctrl;
107 
108 	BUG_ON(!dev->ats || !dev->ats->is_enabled);
109 
110 	pci_read_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, &ctrl);
111 	ctrl &= ~PCI_ATS_CTRL_ENABLE;
112 	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
113 
114 	dev->ats->is_enabled = 0;
115 
116 	if (dev->is_physfn || dev->is_virtfn) {
117 		struct pci_dev *pdev = dev->is_physfn ? dev : dev->physfn;
118 
119 		mutex_lock(&pdev->sriov->lock);
120 		pdev->ats->ref_cnt--;
121 		if (!pdev->ats->ref_cnt)
122 			ats_free_one(pdev);
123 		mutex_unlock(&pdev->sriov->lock);
124 	}
125 
126 	if (!dev->is_physfn)
127 		ats_free_one(dev);
128 }
129 EXPORT_SYMBOL_GPL(pci_disable_ats);
130 
131 void pci_restore_ats_state(struct pci_dev *dev)
132 {
133 	u16 ctrl;
134 
135 	if (!pci_ats_enabled(dev))
136 		return;
137 	if (!pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS))
138 		BUG();
139 
140 	ctrl = PCI_ATS_CTRL_ENABLE;
141 	if (!dev->is_virtfn)
142 		ctrl |= PCI_ATS_CTRL_STU(dev->ats->stu - PCI_ATS_MIN_STU);
143 
144 	pci_write_config_word(dev, dev->ats->pos + PCI_ATS_CTRL, ctrl);
145 }
146 EXPORT_SYMBOL_GPL(pci_restore_ats_state);
147 
148 /**
149  * pci_ats_queue_depth - query the ATS Invalidate Queue Depth
150  * @dev: the PCI device
151  *
152  * Returns the queue depth on success, or negative on failure.
153  *
154  * The ATS spec uses 0 in the Invalidate Queue Depth field to
155  * indicate that the function can accept 32 Invalidate Request.
156  * But here we use the `real' values (i.e. 1~32) for the Queue
157  * Depth; and 0 indicates the function shares the Queue with
158  * other functions (doesn't exclusively own a Queue).
159  */
160 int pci_ats_queue_depth(struct pci_dev *dev)
161 {
162 	int pos;
163 	u16 cap;
164 
165 	if (dev->is_virtfn)
166 		return 0;
167 
168 	if (dev->ats)
169 		return dev->ats->qdep;
170 
171 	pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
172 	if (!pos)
173 		return -ENODEV;
174 
175 	pci_read_config_word(dev, pos + PCI_ATS_CAP, &cap);
176 
177 	return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) :
178 				       PCI_ATS_MAX_QDEP;
179 }
180 EXPORT_SYMBOL_GPL(pci_ats_queue_depth);
181 
182 #ifdef CONFIG_PCI_PRI
183 /**
184  * pci_enable_pri - Enable PRI capability
185  * @ pdev: PCI device structure
186  *
187  * Returns 0 on success, negative value on error
188  */
189 int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
190 {
191 	u16 control, status;
192 	u32 max_requests;
193 	int pos;
194 
195 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
196 	if (!pos)
197 		return -EINVAL;
198 
199 	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
200 	pci_read_config_word(pdev, pos + PCI_PRI_STATUS, &status);
201 	if ((control & PCI_PRI_CTRL_ENABLE) ||
202 	    !(status & PCI_PRI_STATUS_STOPPED))
203 		return -EBUSY;
204 
205 	pci_read_config_dword(pdev, pos + PCI_PRI_MAX_REQ, &max_requests);
206 	reqs = min(max_requests, reqs);
207 	pci_write_config_dword(pdev, pos + PCI_PRI_ALLOC_REQ, reqs);
208 
209 	control |= PCI_PRI_CTRL_ENABLE;
210 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
211 
212 	return 0;
213 }
214 EXPORT_SYMBOL_GPL(pci_enable_pri);
215 
216 /**
217  * pci_disable_pri - Disable PRI capability
218  * @pdev: PCI device structure
219  *
220  * Only clears the enabled-bit, regardless of its former value
221  */
222 void pci_disable_pri(struct pci_dev *pdev)
223 {
224 	u16 control;
225 	int pos;
226 
227 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
228 	if (!pos)
229 		return;
230 
231 	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
232 	control &= ~PCI_PRI_CTRL_ENABLE;
233 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
234 }
235 EXPORT_SYMBOL_GPL(pci_disable_pri);
236 
237 /**
238  * pci_reset_pri - Resets device's PRI state
239  * @pdev: PCI device structure
240  *
241  * The PRI capability must be disabled before this function is called.
242  * Returns 0 on success, negative value on error.
243  */
244 int pci_reset_pri(struct pci_dev *pdev)
245 {
246 	u16 control;
247 	int pos;
248 
249 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
250 	if (!pos)
251 		return -EINVAL;
252 
253 	pci_read_config_word(pdev, pos + PCI_PRI_CTRL, &control);
254 	if (control & PCI_PRI_CTRL_ENABLE)
255 		return -EBUSY;
256 
257 	control |= PCI_PRI_CTRL_RESET;
258 
259 	pci_write_config_word(pdev, pos + PCI_PRI_CTRL, control);
260 
261 	return 0;
262 }
263 EXPORT_SYMBOL_GPL(pci_reset_pri);
264 #endif /* CONFIG_PCI_PRI */
265 
266 #ifdef CONFIG_PCI_PASID
267 /**
268  * pci_enable_pasid - Enable the PASID capability
269  * @pdev: PCI device structure
270  * @features: Features to enable
271  *
272  * Returns 0 on success, negative value on error. This function checks
273  * whether the features are actually supported by the device and returns
274  * an error if not.
275  */
276 int pci_enable_pasid(struct pci_dev *pdev, int features)
277 {
278 	u16 control, supported;
279 	int pos;
280 
281 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
282 	if (!pos)
283 		return -EINVAL;
284 
285 	pci_read_config_word(pdev, pos + PCI_PASID_CTRL, &control);
286 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
287 
288 	if (control & PCI_PASID_CTRL_ENABLE)
289 		return -EINVAL;
290 
291 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
292 
293 	/* User wants to enable anything unsupported? */
294 	if ((supported & features) != features)
295 		return -EINVAL;
296 
297 	control = PCI_PASID_CTRL_ENABLE | features;
298 
299 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
300 
301 	return 0;
302 }
303 EXPORT_SYMBOL_GPL(pci_enable_pasid);
304 
305 /**
306  * pci_disable_pasid - Disable the PASID capability
307  * @pdev: PCI device structure
308  *
309  */
310 void pci_disable_pasid(struct pci_dev *pdev)
311 {
312 	u16 control = 0;
313 	int pos;
314 
315 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
316 	if (!pos)
317 		return;
318 
319 	pci_write_config_word(pdev, pos + PCI_PASID_CTRL, control);
320 }
321 EXPORT_SYMBOL_GPL(pci_disable_pasid);
322 
323 /**
324  * pci_pasid_features - Check which PASID features are supported
325  * @pdev: PCI device structure
326  *
327  * Returns a negative value when no PASI capability is present.
328  * Otherwise is returns a bitmask with supported features. Current
329  * features reported are:
330  * PCI_PASID_CAP_EXEC - Execute permission supported
331  * PCI_PASID_CAP_PRIV - Privileged mode supported
332  */
333 int pci_pasid_features(struct pci_dev *pdev)
334 {
335 	u16 supported;
336 	int pos;
337 
338 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
339 	if (!pos)
340 		return -EINVAL;
341 
342 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
343 
344 	supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
345 
346 	return supported;
347 }
348 EXPORT_SYMBOL_GPL(pci_pasid_features);
349 
350 #define PASID_NUMBER_SHIFT	8
351 #define PASID_NUMBER_MASK	(0x1f << PASID_NUMBER_SHIFT)
352 /**
353  * pci_max_pasid - Get maximum number of PASIDs supported by device
354  * @pdev: PCI device structure
355  *
356  * Returns negative value when PASID capability is not present.
357  * Otherwise it returns the numer of supported PASIDs.
358  */
359 int pci_max_pasids(struct pci_dev *pdev)
360 {
361 	u16 supported;
362 	int pos;
363 
364 	pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
365 	if (!pos)
366 		return -EINVAL;
367 
368 	pci_read_config_word(pdev, pos + PCI_PASID_CAP, &supported);
369 
370 	supported = (supported & PASID_NUMBER_MASK) >> PASID_NUMBER_SHIFT;
371 
372 	return (1 << supported);
373 }
374 EXPORT_SYMBOL_GPL(pci_max_pasids);
375 #endif /* CONFIG_PCI_PASID */
376