xref: /openbmc/linux/drivers/pci/Kconfig (revision 3e8bd1ba)
1# SPDX-License-Identifier: GPL-2.0
2#
3# PCI configuration
4#
5
6# select this to offer the PCI prompt
7config HAVE_PCI
8	bool
9
10# select this to unconditionally force on PCI support
11config FORCE_PCI
12	bool
13	select HAVE_PCI
14	select PCI
15
16menuconfig PCI
17	bool "PCI support"
18	depends on HAVE_PCI
19	help
20	  This option enables support for the PCI local bus, including
21	  support for PCI-X and the foundations for PCI Express support.
22	  Say 'Y' here unless you know what you are doing.
23
24if PCI
25
26config PCI_DOMAINS
27	bool
28	depends on PCI
29
30config PCI_DOMAINS_GENERIC
31	bool
32	select PCI_DOMAINS
33
34config PCI_SYSCALL
35	bool
36
37source "drivers/pci/pcie/Kconfig"
38
39config PCI_MSI
40	bool "Message Signaled Interrupts (MSI and MSI-X)"
41	select GENERIC_MSI_IRQ
42	help
43	   This allows device drivers to enable MSI (Message Signaled
44	   Interrupts).  Message Signaled Interrupts enable a device to
45	   generate an interrupt using an inbound Memory Write on its
46	   PCI bus instead of asserting a device IRQ pin.
47
48	   Use of PCI MSI interrupts can be disabled at kernel boot time
49	   by using the 'pci=nomsi' option.  This disables MSI for the
50	   entire system.
51
52	   If you don't know what to do here, say Y.
53
54config PCI_MSI_ARCH_FALLBACKS
55	bool
56
57config PCI_QUIRKS
58	default y
59	bool "Enable PCI quirk workarounds" if EXPERT
60	help
61	  This enables workarounds for various PCI chipset bugs/quirks.
62	  Disable this only if your target machine is unaffected by PCI
63	  quirks.
64
65config PCI_DEBUG
66	bool "PCI Debugging"
67	depends on DEBUG_KERNEL
68	help
69	  Say Y here if you want the PCI core to produce a bunch of debug
70	  messages to the system log.  Select this if you are having a
71	  problem with PCI support and want to see more of what is going on.
72
73	  When in doubt, say N.
74
75config PCI_REALLOC_ENABLE_AUTO
76	bool "Enable PCI resource re-allocation detection"
77	depends on PCI_IOV
78	help
79	  Say Y here if you want the PCI core to detect if PCI resource
80	  re-allocation needs to be enabled. You can always use pci=realloc=on
81	  or pci=realloc=off to override it.  It will automatically
82	  re-allocate PCI resources if SR-IOV BARs have not been allocated by
83	  the BIOS.
84
85	  When in doubt, say N.
86
87config PCI_STUB
88	tristate "PCI Stub driver"
89	help
90	  Say Y or M here if you want be able to reserve a PCI device
91	  when it is going to be assigned to a guest operating system.
92
93	  When in doubt, say N.
94
95config PCI_PF_STUB
96	tristate "PCI PF Stub driver"
97	depends on PCI_IOV
98	help
99	  Say Y or M here if you want to enable support for devices that
100	  require SR-IOV support, while at the same time the PF (Physical
101	  Function) itself is not providing any actual services on the
102	  host itself such as storage or networking.
103
104	  When in doubt, say N.
105
106config XEN_PCIDEV_FRONTEND
107	tristate "Xen PCI Frontend"
108	depends on XEN_PV
109	select PCI_XEN
110	select XEN_XENBUS_FRONTEND
111	default y
112	help
113	  The PCI device frontend driver allows the kernel to import arbitrary
114	  PCI devices from a PCI backend to support PCI driver domains.
115
116config PCI_ATS
117	bool
118
119config PCI_DOE
120	bool
121
122config PCI_ECAM
123	bool
124
125config PCI_LOCKLESS_CONFIG
126	bool
127
128config PCI_BRIDGE_EMUL
129	bool
130
131config PCI_IOV
132	bool "PCI IOV support"
133	select PCI_ATS
134	help
135	  I/O Virtualization is a PCI feature supported by some devices
136	  which allows them to create virtual devices which share their
137	  physical resources.
138
139	  If unsure, say N.
140
141config PCI_PRI
142	bool "PCI PRI support"
143	select PCI_ATS
144	help
145	  PRI is the PCI Page Request Interface. It allows PCI devices that are
146	  behind an IOMMU to recover from page faults.
147
148	  If unsure, say N.
149
150config PCI_PASID
151	bool "PCI PASID support"
152	select PCI_ATS
153	help
154	  Process Address Space Identifiers (PASIDs) can be used by PCI devices
155	  to access more than one IO address space at the same time. To make
156	  use of this feature an IOMMU is required which also supports PASIDs.
157	  Select this option if you have such an IOMMU and want to compile the
158	  driver for it into your kernel.
159
160	  If unsure, say N.
161
162config PCI_P2PDMA
163	bool "PCI peer-to-peer transfer support"
164	depends on ZONE_DEVICE
165	#
166	# The need for the scatterlist DMA bus address flag means PCI P2PDMA
167	# requires 64bit
168	#
169	depends on 64BIT
170	select GENERIC_ALLOCATOR
171	select NEED_SG_DMA_FLAGS
172	help
173	  Enableѕ drivers to do PCI peer-to-peer transactions to and from
174	  BARs that are exposed in other devices that are the part of
175	  the hierarchy where peer-to-peer DMA is guaranteed by the PCI
176	  specification to work (ie. anything below a single PCI bridge).
177
178	  Many PCIe root complexes do not support P2P transactions and
179	  it's hard to tell which support it at all, so at this time,
180	  P2P DMA transactions must be between devices behind the same root
181	  port.
182
183	  If unsure, say N.
184
185config PCI_LABEL
186	def_bool y if (DMI || ACPI)
187	select NLS
188
189config PCI_HYPERV
190	tristate "Hyper-V PCI Frontend"
191	depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && SYSFS
192	select PCI_HYPERV_INTERFACE
193	help
194	  The PCI device frontend driver allows the kernel to import arbitrary
195	  PCI devices from a PCI backend to support PCI driver domains.
196
197config PCI_DYNAMIC_OF_NODES
198	bool "Create Device tree nodes for PCI devices"
199	depends on OF_IRQ
200	select OF_DYNAMIC
201	help
202	  This option enables support for generating device tree nodes for some
203	  PCI devices. Thus, the driver of this kind can load and overlay
204	  flattened device tree for its downstream devices.
205
206	  Once this option is selected, the device tree nodes will be generated
207	  for all PCI bridges.
208
209choice
210	prompt "PCI Express hierarchy optimization setting"
211	default PCIE_BUS_DEFAULT
212	depends on PCI && EXPERT
213	help
214	  MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe
215	  device parameters that affect performance and the ability to
216	  support hotplug and peer-to-peer DMA.
217
218	  The following choices set the MPS and MRRS optimization strategy
219	  at compile-time.  The choices are the same as those offered for
220	  the kernel command-line parameter 'pci', i.e.,
221	  'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe',
222	  'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'.
223
224	  This is a compile-time setting and can be overridden by the above
225	  command-line parameters.  If unsure, choose PCIE_BUS_DEFAULT.
226
227config PCIE_BUS_TUNE_OFF
228	bool "Tune Off"
229	depends on PCI
230	help
231	  Use the BIOS defaults; don't touch MPS at all.  This is the same
232	  as booting with 'pci=pcie_bus_tune_off'.
233
234config PCIE_BUS_DEFAULT
235	bool "Default"
236	depends on PCI
237	help
238	  Default choice; ensure that the MPS matches upstream bridge.
239
240config PCIE_BUS_SAFE
241	bool "Safe"
242	depends on PCI
243	help
244	  Use largest MPS that boot-time devices support.  If you have a
245	  closed system with no possibility of adding new devices, this
246	  will use the largest MPS that's supported by all devices.  This
247	  is the same as booting with 'pci=pcie_bus_safe'.
248
249config PCIE_BUS_PERFORMANCE
250	bool "Performance"
251	depends on PCI
252	help
253	  Use MPS and MRRS for best performance.  Ensure that a given
254	  device's MPS is no larger than its parent MPS, which allows us to
255	  keep all switches/bridges to the max MPS supported by their
256	  parent.  This is the same as booting with 'pci=pcie_bus_perf'.
257
258config PCIE_BUS_PEER2PEER
259	bool "Peer2peer"
260	depends on PCI
261	help
262	  Set MPS = 128 for all devices.  MPS configuration effected by the
263	  other options could cause the MPS on one root port to be
264	  different than that of the MPS on another, which may cause
265	  hot-added devices or peer-to-peer DMA to fail.  Set MPS to the
266	  smallest possible value (128B) system-wide to avoid these issues.
267	  This is the same as booting with 'pci=pcie_bus_peer2peer'.
268
269endchoice
270
271config VGA_ARB
272	bool "VGA Arbitration" if EXPERT
273	default y
274	depends on (PCI && !S390)
275	help
276	  Some "legacy" VGA devices implemented on PCI typically have the same
277	  hard-decoded addresses as they did on ISA. When multiple PCI devices
278	  are accessed at same time they need some kind of coordination. Please
279	  see Documentation/gpu/vgaarbiter.rst for more details. Select this to
280	  enable VGA arbiter.
281
282config VGA_ARB_MAX_GPUS
283	int "Maximum number of GPUs"
284	default 16
285	depends on VGA_ARB
286	help
287	  Reserves space in the kernel to maintain resource locking for
288	  multiple GPUS.  The overhead for each GPU is very small.
289
290source "drivers/pci/hotplug/Kconfig"
291source "drivers/pci/controller/Kconfig"
292source "drivers/pci/endpoint/Kconfig"
293source "drivers/pci/switch/Kconfig"
294
295endif
296