1 /* 2 * Support for common PCI multi-I/O cards (which is most of them) 3 * 4 * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 9 * 2 of the License, or (at your option) any later version. 10 * 11 * 12 * Multi-function PCI cards are supposed to present separate logical 13 * devices on the bus. A common thing to do seems to be to just use 14 * one logical device with lots of base address registers for both 15 * parallel ports and serial ports. This driver is for dealing with 16 * that. 17 * 18 */ 19 20 #include <linux/types.h> 21 #include <linux/module.h> 22 #include <linux/init.h> 23 #include <linux/pci.h> 24 #include <linux/parport.h> 25 #include <linux/parport_pc.h> 26 #include <linux/8250_pci.h> 27 28 enum parport_pc_pci_cards { 29 titan_110l = 0, 30 titan_210l, 31 netmos_9xx5_combo, 32 netmos_9855, 33 avlab_1s1p, 34 avlab_1s2p, 35 avlab_2s1p, 36 siig_1s1p_10x, 37 siig_2s1p_10x, 38 siig_2p1s_20x, 39 siig_1s1p_20x, 40 siig_2s1p_20x, 41 }; 42 43 /* each element directly indexed from enum list, above */ 44 struct parport_pc_pci { 45 int numports; 46 struct { /* BAR (base address registers) numbers in the config 47 space header */ 48 int lo; 49 int hi; /* -1 if not there, >6 for offset-method (max 50 BAR is 6) */ 51 } addr[4]; 52 53 /* If set, this is called immediately after pci_enable_device. 54 * If it returns non-zero, no probing will take place and the 55 * ports will not be used. */ 56 int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card, 57 int autoirq, int autodma); 58 59 /* If set, this is called after probing for ports. If 'failed' 60 * is non-zero we couldn't use any of the ports. */ 61 void (*postinit_hook) (struct pci_dev *pdev, 62 struct parport_pc_pci *card, int failed); 63 }; 64 65 static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *card, int autoirq, int autodma) 66 { 67 /* 68 * Netmos uses the subdevice ID to indicate the number of parallel 69 * and serial ports. The form is 0x00PS, where <P> is the number of 70 * parallel ports and <S> is the number of serial ports. 71 */ 72 card->numports = (dev->subsystem_device & 0xf0) >> 4; 73 return 0; 74 } 75 76 static struct parport_pc_pci cards[] __devinitdata = { 77 /* titan_110l */ { 1, { { 3, -1 }, } }, 78 /* titan_210l */ { 1, { { 3, -1 }, } }, 79 /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init }, 80 /* netmos_9855 */ { 1, { { 2, -1 }, }, netmos_parallel_init }, 81 /* avlab_1s1p */ { 1, { { 1, 2}, } }, 82 /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} }, 83 /* avlab_2s1p */ { 1, { { 2, 3}, } }, 84 /* siig_1s1p_10x */ { 1, { { 3, 4 }, } }, 85 /* siig_2s1p_10x */ { 1, { { 4, 5 }, } }, 86 /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } }, 87 /* siig_1s1p_20x */ { 1, { { 1, 2 }, } }, 88 /* siig_2s1p_20x */ { 1, { { 2, 3 }, } }, 89 }; 90 91 static struct pci_device_id parport_serial_pci_tbl[] = { 92 /* PCI cards */ 93 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L, 94 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l }, 95 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L, 96 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l }, 97 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735, 98 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 99 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745, 100 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 101 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, 102 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 103 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845, 104 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 105 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, 106 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 }, 107 /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ 108 { PCI_VENDOR_ID_AFAVLAB, 0x2110, 109 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 110 { PCI_VENDOR_ID_AFAVLAB, 0x2111, 111 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 112 { PCI_VENDOR_ID_AFAVLAB, 0x2112, 113 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 114 { PCI_VENDOR_ID_AFAVLAB, 0x2140, 115 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 116 { PCI_VENDOR_ID_AFAVLAB, 0x2141, 117 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 118 { PCI_VENDOR_ID_AFAVLAB, 0x2142, 119 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 120 { PCI_VENDOR_ID_AFAVLAB, 0x2160, 121 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 122 { PCI_VENDOR_ID_AFAVLAB, 0x2161, 123 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 124 { PCI_VENDOR_ID_AFAVLAB, 0x2162, 125 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 126 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550, 127 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 128 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650, 129 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 130 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850, 131 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 132 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550, 133 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 134 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650, 135 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 136 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850, 137 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 138 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550, 139 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 140 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650, 141 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 142 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850, 143 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 144 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550, 145 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 146 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650, 147 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x }, 148 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850, 149 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x }, 150 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550, 151 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 152 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650, 153 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 154 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850, 155 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 156 157 { 0, } /* terminate list */ 158 }; 159 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); 160 161 /* 162 * This table describes the serial "geometry" of these boards. Any 163 * quirks for these can be found in drivers/serial/8250_pci.c 164 * 165 * Cards not tested are marked n/t 166 * If you have one of these cards and it works for you, please tell me.. 167 */ 168 static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { 169 [titan_110l] = { 170 .flags = FL_BASE1 | FL_BASE_BARS, 171 .num_ports = 1, 172 .base_baud = 921600, 173 .uart_offset = 8, 174 }, 175 [titan_210l] = { 176 .flags = FL_BASE1 | FL_BASE_BARS, 177 .num_ports = 2, 178 .base_baud = 921600, 179 .uart_offset = 8, 180 }, 181 [netmos_9xx5_combo] = { 182 .flags = FL_BASE0 | FL_BASE_BARS, 183 .num_ports = 1, 184 .base_baud = 115200, 185 .uart_offset = 8, 186 }, 187 [netmos_9855] = { 188 .flags = FL_BASE4 | FL_BASE_BARS, 189 .num_ports = 1, 190 .base_baud = 115200, 191 .uart_offset = 8, 192 }, 193 [avlab_1s1p] = { /* n/t */ 194 .flags = FL_BASE0 | FL_BASE_BARS, 195 .num_ports = 1, 196 .base_baud = 115200, 197 .uart_offset = 8, 198 }, 199 [avlab_1s2p] = { /* n/t */ 200 .flags = FL_BASE0 | FL_BASE_BARS, 201 .num_ports = 1, 202 .base_baud = 115200, 203 .uart_offset = 8, 204 }, 205 [avlab_2s1p] = { /* n/t */ 206 .flags = FL_BASE0 | FL_BASE_BARS, 207 .num_ports = 2, 208 .base_baud = 115200, 209 .uart_offset = 8, 210 }, 211 [siig_1s1p_10x] = { 212 .flags = FL_BASE2, 213 .num_ports = 1, 214 .base_baud = 460800, 215 .uart_offset = 8, 216 }, 217 [siig_2s1p_10x] = { 218 .flags = FL_BASE2, 219 .num_ports = 1, 220 .base_baud = 921600, 221 .uart_offset = 8, 222 }, 223 [siig_2p1s_20x] = { 224 .flags = FL_BASE0, 225 .num_ports = 1, 226 .base_baud = 921600, 227 .uart_offset = 8, 228 }, 229 [siig_1s1p_20x] = { 230 .flags = FL_BASE0, 231 .num_ports = 1, 232 .base_baud = 921600, 233 .uart_offset = 8, 234 }, 235 [siig_2s1p_20x] = { 236 .flags = FL_BASE0, 237 .num_ports = 1, 238 .base_baud = 921600, 239 .uart_offset = 8, 240 }, 241 }; 242 243 struct parport_serial_private { 244 struct serial_private *serial; 245 int num_par; 246 struct parport *port[PARPORT_MAX]; 247 struct parport_pc_pci par; 248 }; 249 250 /* Register the serial port(s) of a PCI card. */ 251 static int __devinit serial_register (struct pci_dev *dev, 252 const struct pci_device_id *id) 253 { 254 struct parport_serial_private *priv = pci_get_drvdata (dev); 255 struct pciserial_board *board; 256 struct serial_private *serial; 257 258 board = &pci_parport_serial_boards[id->driver_data]; 259 serial = pciserial_init_ports(dev, board); 260 261 if (IS_ERR(serial)) 262 return PTR_ERR(serial); 263 264 priv->serial = serial; 265 return 0; 266 } 267 268 /* Register the parallel port(s) of a PCI card. */ 269 static int __devinit parport_register (struct pci_dev *dev, 270 const struct pci_device_id *id) 271 { 272 struct parport_pc_pci *card; 273 struct parport_serial_private *priv = pci_get_drvdata (dev); 274 int n, success = 0; 275 276 priv->par = cards[id->driver_data]; 277 card = &priv->par; 278 if (card->preinit_hook && 279 card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) 280 return -ENODEV; 281 282 for (n = 0; n < card->numports; n++) { 283 struct parport *port; 284 int lo = card->addr[n].lo; 285 int hi = card->addr[n].hi; 286 unsigned long io_lo, io_hi; 287 288 if (priv->num_par == ARRAY_SIZE (priv->port)) { 289 printk (KERN_WARNING 290 "parport_serial: %s: only %zu parallel ports " 291 "supported (%d reported)\n", pci_name (dev), 292 ARRAY_SIZE(priv->port), card->numports); 293 break; 294 } 295 296 io_lo = pci_resource_start (dev, lo); 297 io_hi = 0; 298 if ((hi >= 0) && (hi <= 6)) 299 io_hi = pci_resource_start (dev, hi); 300 else if (hi > 6) 301 io_lo += hi; /* Reinterpret the meaning of 302 "hi" as an offset (see SYBA 303 def.) */ 304 /* TODO: test if sharing interrupts works */ 305 dev_dbg(&dev->dev, "PCI parallel port detected: I/O at " 306 "%#lx(%#lx)\n", io_lo, io_hi); 307 port = parport_pc_probe_port (io_lo, io_hi, PARPORT_IRQ_NONE, 308 PARPORT_DMA_NONE, &dev->dev); 309 if (port) { 310 priv->port[priv->num_par++] = port; 311 success = 1; 312 } 313 } 314 315 if (card->postinit_hook) 316 card->postinit_hook (dev, card, !success); 317 318 return 0; 319 } 320 321 static int __devinit parport_serial_pci_probe (struct pci_dev *dev, 322 const struct pci_device_id *id) 323 { 324 struct parport_serial_private *priv; 325 int err; 326 327 priv = kzalloc (sizeof *priv, GFP_KERNEL); 328 if (!priv) 329 return -ENOMEM; 330 pci_set_drvdata (dev, priv); 331 332 err = pci_enable_device (dev); 333 if (err) { 334 pci_set_drvdata (dev, NULL); 335 kfree (priv); 336 return err; 337 } 338 339 if (parport_register (dev, id)) { 340 pci_set_drvdata (dev, NULL); 341 kfree (priv); 342 return -ENODEV; 343 } 344 345 if (serial_register (dev, id)) { 346 int i; 347 for (i = 0; i < priv->num_par; i++) 348 parport_pc_unregister_port (priv->port[i]); 349 pci_set_drvdata (dev, NULL); 350 kfree (priv); 351 return -ENODEV; 352 } 353 354 return 0; 355 } 356 357 static void __devexit parport_serial_pci_remove (struct pci_dev *dev) 358 { 359 struct parport_serial_private *priv = pci_get_drvdata (dev); 360 int i; 361 362 pci_set_drvdata(dev, NULL); 363 364 // Serial ports 365 if (priv->serial) 366 pciserial_remove_ports(priv->serial); 367 368 // Parallel ports 369 for (i = 0; i < priv->num_par; i++) 370 parport_pc_unregister_port (priv->port[i]); 371 372 kfree (priv); 373 return; 374 } 375 376 #ifdef CONFIG_PM 377 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state) 378 { 379 struct parport_serial_private *priv = pci_get_drvdata(dev); 380 381 if (priv->serial) 382 pciserial_suspend_ports(priv->serial); 383 384 /* FIXME: What about parport? */ 385 386 pci_save_state(dev); 387 pci_set_power_state(dev, pci_choose_state(dev, state)); 388 return 0; 389 } 390 391 static int parport_serial_pci_resume(struct pci_dev *dev) 392 { 393 struct parport_serial_private *priv = pci_get_drvdata(dev); 394 int err; 395 396 pci_set_power_state(dev, PCI_D0); 397 pci_restore_state(dev); 398 399 /* 400 * The device may have been disabled. Re-enable it. 401 */ 402 err = pci_enable_device(dev); 403 if (err) { 404 printk(KERN_ERR "parport_serial: %s: error enabling " 405 "device for resume (%d)\n", pci_name(dev), err); 406 return err; 407 } 408 409 if (priv->serial) 410 pciserial_resume_ports(priv->serial); 411 412 /* FIXME: What about parport? */ 413 414 return 0; 415 } 416 #endif 417 418 static struct pci_driver parport_serial_pci_driver = { 419 .name = "parport_serial", 420 .id_table = parport_serial_pci_tbl, 421 .probe = parport_serial_pci_probe, 422 .remove = __devexit_p(parport_serial_pci_remove), 423 #ifdef CONFIG_PM 424 .suspend = parport_serial_pci_suspend, 425 .resume = parport_serial_pci_resume, 426 #endif 427 }; 428 429 430 static int __init parport_serial_init (void) 431 { 432 return pci_register_driver (&parport_serial_pci_driver); 433 } 434 435 static void __exit parport_serial_exit (void) 436 { 437 pci_unregister_driver (&parport_serial_pci_driver); 438 return; 439 } 440 441 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>"); 442 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards"); 443 MODULE_LICENSE("GPL"); 444 445 module_init(parport_serial_init); 446 module_exit(parport_serial_exit); 447