1 /* 2 * Support for common PCI multi-I/O cards (which is most of them) 3 * 4 * Copyright (C) 2001 Tim Waugh <twaugh@redhat.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * as published by the Free Software Foundation; either version 9 * 2 of the License, or (at your option) any later version. 10 * 11 * 12 * Multi-function PCI cards are supposed to present separate logical 13 * devices on the bus. A common thing to do seems to be to just use 14 * one logical device with lots of base address registers for both 15 * parallel ports and serial ports. This driver is for dealing with 16 * that. 17 * 18 */ 19 20 #include <linux/types.h> 21 #include <linux/module.h> 22 #include <linux/init.h> 23 #include <linux/slab.h> 24 #include <linux/pci.h> 25 #include <linux/interrupt.h> 26 #include <linux/parport.h> 27 #include <linux/parport_pc.h> 28 #include <linux/8250_pci.h> 29 30 enum parport_pc_pci_cards { 31 titan_110l = 0, 32 titan_210l, 33 netmos_9xx5_combo, 34 netmos_9855, 35 netmos_9855_2p, 36 avlab_1s1p, 37 avlab_1s2p, 38 avlab_2s1p, 39 siig_1s1p_10x, 40 siig_2s1p_10x, 41 siig_2p1s_20x, 42 siig_1s1p_20x, 43 siig_2s1p_20x, 44 }; 45 46 /* each element directly indexed from enum list, above */ 47 struct parport_pc_pci { 48 int numports; 49 struct { /* BAR (base address registers) numbers in the config 50 space header */ 51 int lo; 52 int hi; /* -1 if not there, >6 for offset-method (max 53 BAR is 6) */ 54 } addr[4]; 55 56 /* If set, this is called immediately after pci_enable_device. 57 * If it returns non-zero, no probing will take place and the 58 * ports will not be used. */ 59 int (*preinit_hook) (struct pci_dev *pdev, struct parport_pc_pci *card, 60 int autoirq, int autodma); 61 62 /* If set, this is called after probing for ports. If 'failed' 63 * is non-zero we couldn't use any of the ports. */ 64 void (*postinit_hook) (struct pci_dev *pdev, 65 struct parport_pc_pci *card, int failed); 66 }; 67 68 static int __devinit netmos_parallel_init(struct pci_dev *dev, struct parport_pc_pci *par, int autoirq, int autodma) 69 { 70 /* the rule described below doesn't hold for this device */ 71 if (dev->device == PCI_DEVICE_ID_NETMOS_9835 && 72 dev->subsystem_vendor == PCI_VENDOR_ID_IBM && 73 dev->subsystem_device == 0x0299) 74 return -ENODEV; 75 /* 76 * Netmos uses the subdevice ID to indicate the number of parallel 77 * and serial ports. The form is 0x00PS, where <P> is the number of 78 * parallel ports and <S> is the number of serial ports. 79 */ 80 par->numports = (dev->subsystem_device & 0xf0) >> 4; 81 if (par->numports > ARRAY_SIZE(par->addr)) 82 par->numports = ARRAY_SIZE(par->addr); 83 /* 84 * This function is currently only called for cards with up to 85 * one parallel port. 86 * Parallel port BAR is either before or after serial ports BARS; 87 * hence, lo should be either 0 or equal to the number of serial ports. 88 */ 89 if (par->addr[0].lo != 0) 90 par->addr[0].lo = dev->subsystem_device & 0xf; 91 return 0; 92 } 93 94 static struct parport_pc_pci cards[] __devinitdata = { 95 /* titan_110l */ { 1, { { 3, -1 }, } }, 96 /* titan_210l */ { 1, { { 3, -1 }, } }, 97 /* netmos_9xx5_combo */ { 1, { { 2, -1 }, }, netmos_parallel_init }, 98 /* netmos_9855 */ { 1, { { 0, -1 }, }, netmos_parallel_init }, 99 /* netmos_9855_2p */ { 2, { { 0, -1 }, { 2, -1 }, } }, 100 /* avlab_1s1p */ { 1, { { 1, 2}, } }, 101 /* avlab_1s2p */ { 2, { { 1, 2}, { 3, 4 },} }, 102 /* avlab_2s1p */ { 1, { { 2, 3}, } }, 103 /* siig_1s1p_10x */ { 1, { { 3, 4 }, } }, 104 /* siig_2s1p_10x */ { 1, { { 4, 5 }, } }, 105 /* siig_2p1s_20x */ { 2, { { 1, 2 }, { 3, 4 }, } }, 106 /* siig_1s1p_20x */ { 1, { { 1, 2 }, } }, 107 /* siig_2s1p_20x */ { 1, { { 2, 3 }, } }, 108 }; 109 110 static struct pci_device_id parport_serial_pci_tbl[] = { 111 /* PCI cards */ 112 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_110L, 113 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_110l }, 114 { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_210L, 115 PCI_ANY_ID, PCI_ANY_ID, 0, 0, titan_210l }, 116 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9735, 117 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 118 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9745, 119 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 120 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, 121 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 122 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9845, 123 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9xx5_combo }, 124 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, 125 0x1000, 0x0020, 0, 0, netmos_9855_2p }, 126 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, 127 0x1000, 0x0022, 0, 0, netmos_9855_2p }, 128 { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9855, 129 PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9855 }, 130 /* PCI_VENDOR_ID_AVLAB/Intek21 has another bunch of cards ...*/ 131 { PCI_VENDOR_ID_AFAVLAB, 0x2110, 132 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 133 { PCI_VENDOR_ID_AFAVLAB, 0x2111, 134 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 135 { PCI_VENDOR_ID_AFAVLAB, 0x2112, 136 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s1p }, 137 { PCI_VENDOR_ID_AFAVLAB, 0x2140, 138 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 139 { PCI_VENDOR_ID_AFAVLAB, 0x2141, 140 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 141 { PCI_VENDOR_ID_AFAVLAB, 0x2142, 142 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_1s2p }, 143 { PCI_VENDOR_ID_AFAVLAB, 0x2160, 144 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 145 { PCI_VENDOR_ID_AFAVLAB, 0x2161, 146 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 147 { PCI_VENDOR_ID_AFAVLAB, 0x2162, 148 PCI_ANY_ID, PCI_ANY_ID, 0, 0, avlab_2s1p }, 149 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_550, 150 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 151 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_650, 152 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 153 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_10x_850, 154 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_10x }, 155 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_550, 156 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 157 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_650, 158 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 159 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_10x_850, 160 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_10x }, 161 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_550, 162 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 163 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_650, 164 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 165 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2P1S_20x_850, 166 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2p1s_20x }, 167 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_550, 168 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 169 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_650, 170 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x }, 171 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S1P_20x_850, 172 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_1s1p_20x }, 173 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_550, 174 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 175 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_650, 176 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 177 { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_2S1P_20x_850, 178 PCI_ANY_ID, PCI_ANY_ID, 0, 0, siig_2s1p_20x }, 179 180 { 0, } /* terminate list */ 181 }; 182 MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); 183 184 /* 185 * This table describes the serial "geometry" of these boards. Any 186 * quirks for these can be found in drivers/serial/8250_pci.c 187 * 188 * Cards not tested are marked n/t 189 * If you have one of these cards and it works for you, please tell me.. 190 */ 191 static struct pciserial_board pci_parport_serial_boards[] __devinitdata = { 192 [titan_110l] = { 193 .flags = FL_BASE1 | FL_BASE_BARS, 194 .num_ports = 1, 195 .base_baud = 921600, 196 .uart_offset = 8, 197 }, 198 [titan_210l] = { 199 .flags = FL_BASE1 | FL_BASE_BARS, 200 .num_ports = 2, 201 .base_baud = 921600, 202 .uart_offset = 8, 203 }, 204 [netmos_9xx5_combo] = { 205 .flags = FL_BASE0 | FL_BASE_BARS, 206 .num_ports = 1, 207 .base_baud = 115200, 208 .uart_offset = 8, 209 }, 210 [netmos_9855] = { 211 .flags = FL_BASE2 | FL_BASE_BARS, 212 .num_ports = 1, 213 .base_baud = 115200, 214 .uart_offset = 8, 215 }, 216 [netmos_9855_2p] = { 217 .flags = FL_BASE4 | FL_BASE_BARS, 218 .num_ports = 1, 219 .base_baud = 115200, 220 .uart_offset = 8, 221 }, 222 [avlab_1s1p] = { /* n/t */ 223 .flags = FL_BASE0 | FL_BASE_BARS, 224 .num_ports = 1, 225 .base_baud = 115200, 226 .uart_offset = 8, 227 }, 228 [avlab_1s2p] = { /* n/t */ 229 .flags = FL_BASE0 | FL_BASE_BARS, 230 .num_ports = 1, 231 .base_baud = 115200, 232 .uart_offset = 8, 233 }, 234 [avlab_2s1p] = { /* n/t */ 235 .flags = FL_BASE0 | FL_BASE_BARS, 236 .num_ports = 2, 237 .base_baud = 115200, 238 .uart_offset = 8, 239 }, 240 [siig_1s1p_10x] = { 241 .flags = FL_BASE2, 242 .num_ports = 1, 243 .base_baud = 460800, 244 .uart_offset = 8, 245 }, 246 [siig_2s1p_10x] = { 247 .flags = FL_BASE2, 248 .num_ports = 1, 249 .base_baud = 921600, 250 .uart_offset = 8, 251 }, 252 [siig_2p1s_20x] = { 253 .flags = FL_BASE0, 254 .num_ports = 1, 255 .base_baud = 921600, 256 .uart_offset = 8, 257 }, 258 [siig_1s1p_20x] = { 259 .flags = FL_BASE0, 260 .num_ports = 1, 261 .base_baud = 921600, 262 .uart_offset = 8, 263 }, 264 [siig_2s1p_20x] = { 265 .flags = FL_BASE0, 266 .num_ports = 1, 267 .base_baud = 921600, 268 .uart_offset = 8, 269 }, 270 }; 271 272 struct parport_serial_private { 273 struct serial_private *serial; 274 int num_par; 275 struct parport *port[PARPORT_MAX]; 276 struct parport_pc_pci par; 277 }; 278 279 /* Register the serial port(s) of a PCI card. */ 280 static int __devinit serial_register (struct pci_dev *dev, 281 const struct pci_device_id *id) 282 { 283 struct parport_serial_private *priv = pci_get_drvdata (dev); 284 struct pciserial_board *board; 285 struct serial_private *serial; 286 287 board = &pci_parport_serial_boards[id->driver_data]; 288 serial = pciserial_init_ports(dev, board); 289 290 if (IS_ERR(serial)) 291 return PTR_ERR(serial); 292 293 priv->serial = serial; 294 return 0; 295 } 296 297 /* Register the parallel port(s) of a PCI card. */ 298 static int __devinit parport_register (struct pci_dev *dev, 299 const struct pci_device_id *id) 300 { 301 struct parport_pc_pci *card; 302 struct parport_serial_private *priv = pci_get_drvdata (dev); 303 int n, success = 0; 304 305 priv->par = cards[id->driver_data]; 306 card = &priv->par; 307 if (card->preinit_hook && 308 card->preinit_hook (dev, card, PARPORT_IRQ_NONE, PARPORT_DMA_NONE)) 309 return -ENODEV; 310 311 for (n = 0; n < card->numports; n++) { 312 struct parport *port; 313 int lo = card->addr[n].lo; 314 int hi = card->addr[n].hi; 315 unsigned long io_lo, io_hi; 316 int irq; 317 318 if (priv->num_par == ARRAY_SIZE (priv->port)) { 319 printk (KERN_WARNING 320 "parport_serial: %s: only %zu parallel ports " 321 "supported (%d reported)\n", pci_name (dev), 322 ARRAY_SIZE(priv->port), card->numports); 323 break; 324 } 325 326 io_lo = pci_resource_start (dev, lo); 327 io_hi = 0; 328 if ((hi >= 0) && (hi <= 6)) 329 io_hi = pci_resource_start (dev, hi); 330 else if (hi > 6) 331 io_lo += hi; /* Reinterpret the meaning of 332 "hi" as an offset (see SYBA 333 def.) */ 334 /* TODO: test if sharing interrupts works */ 335 irq = dev->irq; 336 if (irq == IRQ_NONE) { 337 dev_dbg(&dev->dev, 338 "PCI parallel port detected: I/O at %#lx(%#lx)\n", 339 io_lo, io_hi); 340 irq = PARPORT_IRQ_NONE; 341 } else { 342 dev_dbg(&dev->dev, 343 "PCI parallel port detected: I/O at %#lx(%#lx), IRQ %d\n", 344 io_lo, io_hi, irq); 345 } 346 port = parport_pc_probe_port (io_lo, io_hi, irq, 347 PARPORT_DMA_NONE, &dev->dev, IRQF_SHARED); 348 if (port) { 349 priv->port[priv->num_par++] = port; 350 success = 1; 351 } 352 } 353 354 if (card->postinit_hook) 355 card->postinit_hook (dev, card, !success); 356 357 return 0; 358 } 359 360 static int __devinit parport_serial_pci_probe (struct pci_dev *dev, 361 const struct pci_device_id *id) 362 { 363 struct parport_serial_private *priv; 364 int err; 365 366 priv = kzalloc (sizeof *priv, GFP_KERNEL); 367 if (!priv) 368 return -ENOMEM; 369 pci_set_drvdata (dev, priv); 370 371 err = pci_enable_device (dev); 372 if (err) { 373 pci_set_drvdata (dev, NULL); 374 kfree (priv); 375 return err; 376 } 377 378 if (parport_register (dev, id)) { 379 pci_set_drvdata (dev, NULL); 380 kfree (priv); 381 return -ENODEV; 382 } 383 384 if (serial_register (dev, id)) { 385 int i; 386 for (i = 0; i < priv->num_par; i++) 387 parport_pc_unregister_port (priv->port[i]); 388 pci_set_drvdata (dev, NULL); 389 kfree (priv); 390 return -ENODEV; 391 } 392 393 return 0; 394 } 395 396 static void __devexit parport_serial_pci_remove (struct pci_dev *dev) 397 { 398 struct parport_serial_private *priv = pci_get_drvdata (dev); 399 int i; 400 401 pci_set_drvdata(dev, NULL); 402 403 // Serial ports 404 if (priv->serial) 405 pciserial_remove_ports(priv->serial); 406 407 // Parallel ports 408 for (i = 0; i < priv->num_par; i++) 409 parport_pc_unregister_port (priv->port[i]); 410 411 kfree (priv); 412 return; 413 } 414 415 #ifdef CONFIG_PM 416 static int parport_serial_pci_suspend(struct pci_dev *dev, pm_message_t state) 417 { 418 struct parport_serial_private *priv = pci_get_drvdata(dev); 419 420 if (priv->serial) 421 pciserial_suspend_ports(priv->serial); 422 423 /* FIXME: What about parport? */ 424 425 pci_save_state(dev); 426 pci_set_power_state(dev, pci_choose_state(dev, state)); 427 return 0; 428 } 429 430 static int parport_serial_pci_resume(struct pci_dev *dev) 431 { 432 struct parport_serial_private *priv = pci_get_drvdata(dev); 433 int err; 434 435 pci_set_power_state(dev, PCI_D0); 436 pci_restore_state(dev); 437 438 /* 439 * The device may have been disabled. Re-enable it. 440 */ 441 err = pci_enable_device(dev); 442 if (err) { 443 printk(KERN_ERR "parport_serial: %s: error enabling " 444 "device for resume (%d)\n", pci_name(dev), err); 445 return err; 446 } 447 448 if (priv->serial) 449 pciserial_resume_ports(priv->serial); 450 451 /* FIXME: What about parport? */ 452 453 return 0; 454 } 455 #endif 456 457 static struct pci_driver parport_serial_pci_driver = { 458 .name = "parport_serial", 459 .id_table = parport_serial_pci_tbl, 460 .probe = parport_serial_pci_probe, 461 .remove = __devexit_p(parport_serial_pci_remove), 462 #ifdef CONFIG_PM 463 .suspend = parport_serial_pci_suspend, 464 .resume = parport_serial_pci_resume, 465 #endif 466 }; 467 468 469 static int __init parport_serial_init (void) 470 { 471 return pci_register_driver (&parport_serial_pci_driver); 472 } 473 474 static void __exit parport_serial_exit (void) 475 { 476 pci_unregister_driver (&parport_serial_pci_driver); 477 return; 478 } 479 480 MODULE_AUTHOR("Tim Waugh <twaugh@redhat.com>"); 481 MODULE_DESCRIPTION("Driver for common parallel+serial multi-I/O PCI cards"); 482 MODULE_LICENSE("GPL"); 483 484 module_init(parport_serial_init); 485 module_exit(parport_serial_exit); 486