1# 2# For a description of the syntax of this configuration file, 3# see Documentation/kbuild/kconfig-language.txt. 4# 5# Parport configuration. 6# 7 8menuconfig PARPORT 9 tristate "Parallel port support" 10 depends on HAS_IOMEM 11 ---help--- 12 If you want to use devices connected to your machine's parallel port 13 (the connector at the computer with 25 holes), e.g. printer, ZIP 14 drive, PLIP link (Parallel Line Internet Protocol is mainly used to 15 create a mini network by connecting the parallel ports of two local 16 machines) etc., then you need to say Y here; please read 17 <file:Documentation/parport.txt> and 18 <file:drivers/parport/BUGS-parport>. 19 20 For extensive information about drivers for many devices attaching 21 to the parallel port see <http://www.torque.net/linux-pp.html> on 22 the WWW. 23 24 It is possible to share a single parallel port among several devices 25 and it is safe to compile all the corresponding drivers into the 26 kernel. To compile parallel port support as a module, choose M here: 27 the module will be called parport. 28 If you have more than one parallel port and want to specify which 29 port and IRQ to be used by this driver at module load time, take a 30 look at <file:Documentation/parport.txt>. 31 32 If unsure, say Y. 33 34if PARPORT 35 36config PARPORT_PC 37 tristate "PC-style hardware" 38 depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && !S390 && \ 39 (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN && \ 40 !XTENSA && !CRIS && !H8300 41 42 ---help--- 43 You should say Y here if you have a PC-style parallel port. All 44 IBM PC compatible computers and some Alphas have PC-style 45 parallel ports. PA-RISC owners should only say Y here if they 46 have a SuperIO parallel port. 47 48 To compile this driver as a module, choose M here: the 49 module will be called parport_pc. 50 51 If unsure, say Y. 52 53config PARPORT_SERIAL 54 tristate "Multi-IO cards (parallel and serial)" 55 depends on SERIAL_8250_PCI && PARPORT_PC && PCI 56 help 57 This adds support for multi-IO PCI cards that have parallel and 58 serial ports. You should say Y or M here. If you say M, the module 59 will be called parport_serial. 60 61config PARPORT_PC_FIFO 62 bool "Use FIFO/DMA if available" 63 depends on PARPORT_PC 64 help 65 Many parallel port chipsets provide hardware that can speed up 66 printing. Say Y here if you want to take advantage of that. 67 68 As well as actually having a FIFO, or DMA capability, the kernel 69 will need to know which IRQ the parallel port has. By default, 70 parallel port interrupts will not be used, and so neither will the 71 FIFO. See <file:Documentation/parport.txt> to find out how to 72 specify which IRQ/DMA to use. 73 74config PARPORT_PC_SUPERIO 75 bool "SuperIO chipset support" 76 depends on PARPORT_PC && !PARISC 77 help 78 Saying Y here enables some probes for Super-IO chipsets in order to 79 find out things like base addresses, IRQ lines and DMA channels. It 80 is safe to say N. 81 82config PARPORT_PC_PCMCIA 83 tristate "Support for PCMCIA management for PC-style ports" 84 depends on PCMCIA && PARPORT_PC 85 help 86 Say Y here if you need PCMCIA support for your PC-style parallel 87 ports. If unsure, say N. 88 89config PARPORT_IP32 90 tristate "SGI IP32 builtin port" 91 depends on SGI_IP32 92 select PARPORT_NOT_PC 93 help 94 Say Y here if you need support for the parallel port on 95 SGI O2 machines. This code is also available as a module (say M), 96 called parport_ip32. If in doubt, saying N is the safe plan. 97 98config PARPORT_AMIGA 99 tristate "Amiga builtin port" 100 depends on AMIGA 101 select PARPORT_NOT_PC 102 help 103 Say Y here if you need support for the parallel port hardware on 104 Amiga machines. This code is also available as a module (say M), 105 called parport_amiga. If in doubt, saying N is the safe plan. 106 107config PARPORT_MFC3 108 tristate "Multiface III parallel port" 109 depends on ZORRO 110 select PARPORT_NOT_PC 111 help 112 Say Y here if you need parallel port support for the MFC3 card. 113 This code is also available as a module (say M), called 114 parport_mfc3. If in doubt, saying N is the safe plan. 115 116config PARPORT_ATARI 117 tristate "Atari hardware" 118 depends on ATARI 119 select PARPORT_NOT_PC 120 help 121 Say Y here if you need support for the parallel port hardware on 122 Atari machines. This code is also available as a module (say M), 123 called parport_atari. If in doubt, saying N is the safe plan. 124 125config PARPORT_GSC 126 tristate 127 default GSC 128 select PARPORT_NOT_PC 129 130config PARPORT_SUNBPP 131 tristate "Sparc hardware" 132 depends on SBUS 133 select PARPORT_NOT_PC 134 help 135 This driver provides support for the bidirectional parallel port 136 found on many Sun machines. Note that many of the newer Ultras 137 actually have pc style hardware instead. 138 139config PARPORT_AX88796 140 tristate "AX88796 Parallel Port" 141 select PARPORT_NOT_PC 142 help 143 Say Y here if you need support for the parallel port hardware on 144 the AX88796 network controller chip. This code is also available 145 as a module (say M), called parport_ax88796. 146 147 The driver is not dependent on the AX88796 network driver, and 148 should not interfere with the networking functions of the chip. 149 150config PARPORT_1284 151 bool "IEEE 1284 transfer modes" 152 help 153 If you have a printer that supports status readback or device ID, or 154 want to use a device that uses enhanced parallel port transfer modes 155 such as EPP and ECP, say Y here to enable advanced IEEE 1284 156 transfer modes. Also say Y if you want device ID information to 157 appear in /proc/sys/dev/parport/*/autoprobe*. It is safe to say N. 158 159config PARPORT_NOT_PC 160 bool 161 162endif # PARPORT 163