1 /* 2 * WAX Device Driver 3 * 4 * (c) Copyright 2000 The Puffin Group Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * by Helge Deller <deller@gmx.de> 12 */ 13 14 #include <linux/errno.h> 15 #include <linux/init.h> 16 #include <linux/interrupt.h> 17 #include <linux/ioport.h> 18 #include <linux/slab.h> 19 #include <linux/module.h> 20 #include <linux/types.h> 21 22 #include <asm/io.h> 23 #include <asm/hardware.h> 24 25 #include "gsc.h" 26 27 #define WAX_GSC_IRQ 7 /* Hardcoded Interrupt for GSC */ 28 29 static void wax_choose_irq(struct parisc_device *dev, void *ctrl) 30 { 31 int irq; 32 33 switch (dev->id.sversion) { 34 case 0x73: irq = 1; break; /* i8042 General */ 35 case 0x8c: irq = 6; break; /* Serial */ 36 case 0x90: irq = 10; break; /* EISA */ 37 default: return; /* Unknown */ 38 } 39 40 gsc_asic_assign_irq(ctrl, irq, &dev->irq); 41 42 switch (dev->id.sversion) { 43 case 0x73: irq = 2; break; /* i8042 High-priority */ 44 case 0x90: irq = 0; break; /* EISA NMI */ 45 default: return; /* No secondary IRQ */ 46 } 47 48 gsc_asic_assign_irq(ctrl, irq, &dev->aux_irq); 49 } 50 51 static void __init 52 wax_init_irq(struct gsc_asic *wax) 53 { 54 unsigned long base = wax->hpa; 55 56 /* Wax-off */ 57 gsc_writel(0x00000000, base+OFFSET_IMR); 58 59 /* clear pending interrupts */ 60 gsc_readl(base+OFFSET_IRR); 61 62 /* We're not really convinced we want to reset the onboard 63 * devices. Firmware does it for us... 64 */ 65 66 /* Resets */ 67 // gsc_writel(0xFFFFFFFF, base+0x1000); /* HIL */ 68 // gsc_writel(0xFFFFFFFF, base+0x2000); /* RS232-B on Wax */ 69 } 70 71 static int __init wax_init_chip(struct parisc_device *dev) 72 { 73 struct gsc_asic *wax; 74 struct parisc_device *parent; 75 struct gsc_irq gsc_irq; 76 int ret; 77 78 wax = kzalloc(sizeof(*wax), GFP_KERNEL); 79 if (!wax) 80 return -ENOMEM; 81 82 wax->name = "wax"; 83 wax->hpa = dev->hpa.start; 84 85 wax->version = 0; /* gsc_readb(wax->hpa+WAX_VER); */ 86 printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa); 87 88 /* Stop wax hissing for a bit */ 89 wax_init_irq(wax); 90 91 /* the IRQ wax should use */ 92 dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ); 93 if (dev->irq < 0) { 94 printk(KERN_ERR "%s(): cannot get GSC irq\n", 95 __func__); 96 kfree(wax); 97 return -EBUSY; 98 } 99 100 wax->eim = ((u32) gsc_irq.txn_addr) | gsc_irq.txn_data; 101 102 ret = request_irq(gsc_irq.irq, gsc_asic_intr, 0, "wax", wax); 103 if (ret < 0) { 104 kfree(wax); 105 return ret; 106 } 107 108 /* enable IRQ's for devices below WAX */ 109 gsc_writel(wax->eim, wax->hpa + OFFSET_IAR); 110 111 /* Done init'ing, register this driver */ 112 ret = gsc_common_setup(dev, wax); 113 if (ret) { 114 kfree(wax); 115 return ret; 116 } 117 118 gsc_fixup_irqs(dev, wax, wax_choose_irq); 119 /* On 715-class machines, Wax EISA is a sibling of Wax, not a child. */ 120 parent = parisc_parent(dev); 121 if (parent->id.hw_type != HPHW_IOA) { 122 gsc_fixup_irqs(parent, wax, wax_choose_irq); 123 } 124 125 return ret; 126 } 127 128 static const struct parisc_device_id wax_tbl[] __initconst = { 129 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x0008e }, 130 { 0, } 131 }; 132 133 MODULE_DEVICE_TABLE(parisc, wax_tbl); 134 135 struct parisc_driver wax_driver __refdata = { 136 .name = "wax", 137 .id_table = wax_tbl, 138 .probe = wax_init_chip, 139 }; 140