1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 ** System Bus Adapter (SBA) I/O MMU manager 4 ** 5 ** (c) Copyright 2000-2004 Grant Grundler <grundler @ parisc-linux x org> 6 ** (c) Copyright 2004 Naresh Kumar Inna <knaresh at india x hp x com> 7 ** (c) Copyright 2000-2004 Hewlett-Packard Company 8 ** 9 ** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code) 10 ** 11 ** 12 ** 13 ** This module initializes the IOC (I/O Controller) found on B1000/C3000/ 14 ** J5000/J7000/N-class/L-class machines and their successors. 15 ** 16 ** FIXME: add DMA hint support programming in both sba and lba modules. 17 */ 18 19 #include <linux/types.h> 20 #include <linux/kernel.h> 21 #include <linux/spinlock.h> 22 #include <linux/slab.h> 23 #include <linux/init.h> 24 25 #include <linux/mm.h> 26 #include <linux/string.h> 27 #include <linux/pci.h> 28 #include <linux/dma-map-ops.h> 29 #include <linux/scatterlist.h> 30 #include <linux/iommu-helper.h> 31 32 #include <asm/byteorder.h> 33 #include <asm/io.h> 34 #include <asm/dma.h> /* for DMA_CHUNK_SIZE */ 35 36 #include <asm/hardware.h> /* for register_parisc_driver() stuff */ 37 38 #include <linux/proc_fs.h> 39 #include <linux/seq_file.h> 40 #include <linux/module.h> 41 42 #include <asm/ropes.h> 43 #include <asm/mckinley.h> /* for proc_mckinley_root */ 44 #include <asm/runway.h> /* for proc_runway_root */ 45 #include <asm/page.h> /* for PAGE0 */ 46 #include <asm/pdc.h> /* for PDC_MODEL_* */ 47 #include <asm/pdcpat.h> /* for is_pdc_pat() */ 48 #include <asm/parisc-device.h> 49 50 #include "iommu.h" 51 52 #define MODULE_NAME "SBA" 53 54 /* 55 ** The number of debug flags is a clue - this code is fragile. 56 ** Don't even think about messing with it unless you have 57 ** plenty of 710's to sacrifice to the computer gods. :^) 58 */ 59 #undef DEBUG_SBA_INIT 60 #undef DEBUG_SBA_RUN 61 #undef DEBUG_SBA_RUN_SG 62 #undef DEBUG_SBA_RESOURCE 63 #undef ASSERT_PDIR_SANITY 64 #undef DEBUG_LARGE_SG_ENTRIES 65 #undef DEBUG_DMB_TRAP 66 67 #ifdef DEBUG_SBA_INIT 68 #define DBG_INIT(x...) printk(x) 69 #else 70 #define DBG_INIT(x...) 71 #endif 72 73 #ifdef DEBUG_SBA_RUN 74 #define DBG_RUN(x...) printk(x) 75 #else 76 #define DBG_RUN(x...) 77 #endif 78 79 #ifdef DEBUG_SBA_RUN_SG 80 #define DBG_RUN_SG(x...) printk(x) 81 #else 82 #define DBG_RUN_SG(x...) 83 #endif 84 85 86 #ifdef DEBUG_SBA_RESOURCE 87 #define DBG_RES(x...) printk(x) 88 #else 89 #define DBG_RES(x...) 90 #endif 91 92 #define SBA_INLINE __inline__ 93 94 #define DEFAULT_DMA_HINT_REG 0 95 96 struct sba_device *sba_list; 97 EXPORT_SYMBOL_GPL(sba_list); 98 99 static unsigned long ioc_needs_fdc = 0; 100 101 /* global count of IOMMUs in the system */ 102 static unsigned int global_ioc_cnt = 0; 103 104 /* PA8700 (Piranha 2.2) bug workaround */ 105 static unsigned long piranha_bad_128k = 0; 106 107 /* Looks nice and keeps the compiler happy */ 108 #define SBA_DEV(d) ((struct sba_device *) (d)) 109 110 #ifdef CONFIG_AGP_PARISC 111 #define SBA_AGP_SUPPORT 112 #endif /*CONFIG_AGP_PARISC*/ 113 114 #ifdef SBA_AGP_SUPPORT 115 static int sba_reserve_agpgart = 1; 116 module_param(sba_reserve_agpgart, int, 0444); 117 MODULE_PARM_DESC(sba_reserve_agpgart, "Reserve half of IO pdir as AGPGART"); 118 #endif 119 120 121 /************************************ 122 ** SBA register read and write support 123 ** 124 ** BE WARNED: register writes are posted. 125 ** (ie follow writes which must reach HW with a read) 126 ** 127 ** Superdome (in particular, REO) allows only 64-bit CSR accesses. 128 */ 129 #define READ_REG32(addr) readl(addr) 130 #define READ_REG64(addr) readq(addr) 131 #define WRITE_REG32(val, addr) writel((val), (addr)) 132 #define WRITE_REG64(val, addr) writeq((val), (addr)) 133 134 #ifdef CONFIG_64BIT 135 #define READ_REG(addr) READ_REG64(addr) 136 #define WRITE_REG(value, addr) WRITE_REG64(value, addr) 137 #else 138 #define READ_REG(addr) READ_REG32(addr) 139 #define WRITE_REG(value, addr) WRITE_REG32(value, addr) 140 #endif 141 142 #ifdef DEBUG_SBA_INIT 143 144 /* NOTE: When CONFIG_64BIT isn't defined, READ_REG64() is two 32-bit reads */ 145 146 /** 147 * sba_dump_ranges - debugging only - print ranges assigned to this IOA 148 * @hpa: base address of the sba 149 * 150 * Print the MMIO and IO Port address ranges forwarded by an Astro/Ike/RIO 151 * IO Adapter (aka Bus Converter). 152 */ 153 static void 154 sba_dump_ranges(void __iomem *hpa) 155 { 156 DBG_INIT("SBA at 0x%p\n", hpa); 157 DBG_INIT("IOS_DIST_BASE : %Lx\n", READ_REG64(hpa+IOS_DIST_BASE)); 158 DBG_INIT("IOS_DIST_MASK : %Lx\n", READ_REG64(hpa+IOS_DIST_MASK)); 159 DBG_INIT("IOS_DIST_ROUTE : %Lx\n", READ_REG64(hpa+IOS_DIST_ROUTE)); 160 DBG_INIT("\n"); 161 DBG_INIT("IOS_DIRECT_BASE : %Lx\n", READ_REG64(hpa+IOS_DIRECT_BASE)); 162 DBG_INIT("IOS_DIRECT_MASK : %Lx\n", READ_REG64(hpa+IOS_DIRECT_MASK)); 163 DBG_INIT("IOS_DIRECT_ROUTE: %Lx\n", READ_REG64(hpa+IOS_DIRECT_ROUTE)); 164 } 165 166 /** 167 * sba_dump_tlb - debugging only - print IOMMU operating parameters 168 * @hpa: base address of the IOMMU 169 * 170 * Print the size/location of the IO MMU PDIR. 171 */ 172 static void sba_dump_tlb(void __iomem *hpa) 173 { 174 DBG_INIT("IO TLB at 0x%p\n", hpa); 175 DBG_INIT("IOC_IBASE : 0x%Lx\n", READ_REG64(hpa+IOC_IBASE)); 176 DBG_INIT("IOC_IMASK : 0x%Lx\n", READ_REG64(hpa+IOC_IMASK)); 177 DBG_INIT("IOC_TCNFG : 0x%Lx\n", READ_REG64(hpa+IOC_TCNFG)); 178 DBG_INIT("IOC_PDIR_BASE: 0x%Lx\n", READ_REG64(hpa+IOC_PDIR_BASE)); 179 DBG_INIT("\n"); 180 } 181 #else 182 #define sba_dump_ranges(x) 183 #define sba_dump_tlb(x) 184 #endif /* DEBUG_SBA_INIT */ 185 186 187 #ifdef ASSERT_PDIR_SANITY 188 189 /** 190 * sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry 191 * @ioc: IO MMU structure which owns the pdir we are interested in. 192 * @msg: text to print ont the output line. 193 * @pide: pdir index. 194 * 195 * Print one entry of the IO MMU PDIR in human readable form. 196 */ 197 static void 198 sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide) 199 { 200 /* start printing from lowest pde in rval */ 201 u64 *ptr = &(ioc->pdir_base[pide & (~0U * BITS_PER_LONG)]); 202 unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]); 203 uint rcnt; 204 205 printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", 206 msg, 207 rptr, pide & (BITS_PER_LONG - 1), *rptr); 208 209 rcnt = 0; 210 while (rcnt < BITS_PER_LONG) { 211 printk(KERN_DEBUG "%s %2d %p %016Lx\n", 212 (rcnt == (pide & (BITS_PER_LONG - 1))) 213 ? " -->" : " ", 214 rcnt, ptr, *ptr ); 215 rcnt++; 216 ptr++; 217 } 218 printk(KERN_DEBUG "%s", msg); 219 } 220 221 222 /** 223 * sba_check_pdir - debugging only - consistency checker 224 * @ioc: IO MMU structure which owns the pdir we are interested in. 225 * @msg: text to print ont the output line. 226 * 227 * Verify the resource map and pdir state is consistent 228 */ 229 static int 230 sba_check_pdir(struct ioc *ioc, char *msg) 231 { 232 u32 *rptr_end = (u32 *) &(ioc->res_map[ioc->res_size]); 233 u32 *rptr = (u32 *) ioc->res_map; /* resource map ptr */ 234 u64 *pptr = ioc->pdir_base; /* pdir ptr */ 235 uint pide = 0; 236 237 while (rptr < rptr_end) { 238 u32 rval = *rptr; 239 int rcnt = 32; /* number of bits we might check */ 240 241 while (rcnt) { 242 /* Get last byte and highest bit from that */ 243 u32 pde = ((u32) (((char *)pptr)[7])) << 24; 244 if ((rval ^ pde) & 0x80000000) 245 { 246 /* 247 ** BUMMER! -- res_map != pdir -- 248 ** Dump rval and matching pdir entries 249 */ 250 sba_dump_pdir_entry(ioc, msg, pide); 251 return(1); 252 } 253 rcnt--; 254 rval <<= 1; /* try the next bit */ 255 pptr++; 256 pide++; 257 } 258 rptr++; /* look at next word of res_map */ 259 } 260 /* It'd be nice if we always got here :^) */ 261 return 0; 262 } 263 264 265 /** 266 * sba_dump_sg - debugging only - print Scatter-Gather list 267 * @ioc: IO MMU structure which owns the pdir we are interested in. 268 * @startsg: head of the SG list 269 * @nents: number of entries in SG list 270 * 271 * print the SG list so we can verify it's correct by hand. 272 */ 273 static void 274 sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents) 275 { 276 while (nents-- > 0) { 277 printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n", 278 nents, 279 (unsigned long) sg_dma_address(startsg), 280 sg_dma_len(startsg), 281 sg_virt(startsg), startsg->length); 282 startsg++; 283 } 284 } 285 286 #endif /* ASSERT_PDIR_SANITY */ 287 288 289 290 291 /************************************************************** 292 * 293 * I/O Pdir Resource Management 294 * 295 * Bits set in the resource map are in use. 296 * Each bit can represent a number of pages. 297 * LSbs represent lower addresses (IOVA's). 298 * 299 ***************************************************************/ 300 #define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */ 301 302 /* Convert from IOVP to IOVA and vice versa. */ 303 304 #ifdef ZX1_SUPPORT 305 /* Pluto (aka ZX1) boxes need to set or clear the ibase bits appropriately */ 306 #define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset)) 307 #define SBA_IOVP(ioc,iova) ((iova) & (ioc)->iovp_mask) 308 #else 309 /* only support Astro and ancestors. Saves a few cycles in key places */ 310 #define SBA_IOVA(ioc,iovp,offset,hint_reg) ((iovp) | (offset)) 311 #define SBA_IOVP(ioc,iova) (iova) 312 #endif 313 314 #define PDIR_INDEX(iovp) ((iovp)>>IOVP_SHIFT) 315 316 #define RESMAP_MASK(n) (~0UL << (BITS_PER_LONG - (n))) 317 #define RESMAP_IDX_MASK (sizeof(unsigned long) - 1) 318 319 static unsigned long ptr_to_pide(struct ioc *ioc, unsigned long *res_ptr, 320 unsigned int bitshiftcnt) 321 { 322 return (((unsigned long)res_ptr - (unsigned long)ioc->res_map) << 3) 323 + bitshiftcnt; 324 } 325 326 /** 327 * sba_search_bitmap - find free space in IO PDIR resource bitmap 328 * @ioc: IO MMU structure which owns the pdir we are interested in. 329 * @bits_wanted: number of entries we need. 330 * 331 * Find consecutive free bits in resource bitmap. 332 * Each bit represents one entry in the IO Pdir. 333 * Cool perf optimization: search for log2(size) bits at a time. 334 */ 335 static SBA_INLINE unsigned long 336 sba_search_bitmap(struct ioc *ioc, struct device *dev, 337 unsigned long bits_wanted) 338 { 339 unsigned long *res_ptr = ioc->res_hint; 340 unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]); 341 unsigned long pide = ~0UL, tpide; 342 unsigned long boundary_size; 343 unsigned long shift; 344 int ret; 345 346 boundary_size = dma_get_seg_boundary_nr_pages(dev, IOVP_SHIFT); 347 348 #if defined(ZX1_SUPPORT) 349 BUG_ON(ioc->ibase & ~IOVP_MASK); 350 shift = ioc->ibase >> IOVP_SHIFT; 351 #else 352 shift = 0; 353 #endif 354 355 if (bits_wanted > (BITS_PER_LONG/2)) { 356 /* Search word at a time - no mask needed */ 357 for(; res_ptr < res_end; ++res_ptr) { 358 tpide = ptr_to_pide(ioc, res_ptr, 0); 359 ret = iommu_is_span_boundary(tpide, bits_wanted, 360 shift, 361 boundary_size); 362 if ((*res_ptr == 0) && !ret) { 363 *res_ptr = RESMAP_MASK(bits_wanted); 364 pide = tpide; 365 break; 366 } 367 } 368 /* point to the next word on next pass */ 369 res_ptr++; 370 ioc->res_bitshift = 0; 371 } else { 372 /* 373 ** Search the resource bit map on well-aligned values. 374 ** "o" is the alignment. 375 ** We need the alignment to invalidate I/O TLB using 376 ** SBA HW features in the unmap path. 377 */ 378 unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT); 379 uint bitshiftcnt = ALIGN(ioc->res_bitshift, o); 380 unsigned long mask; 381 382 if (bitshiftcnt >= BITS_PER_LONG) { 383 bitshiftcnt = 0; 384 res_ptr++; 385 } 386 mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt; 387 388 DBG_RES("%s() o %ld %p", __func__, o, res_ptr); 389 while(res_ptr < res_end) 390 { 391 DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr); 392 WARN_ON(mask == 0); 393 tpide = ptr_to_pide(ioc, res_ptr, bitshiftcnt); 394 ret = iommu_is_span_boundary(tpide, bits_wanted, 395 shift, 396 boundary_size); 397 if ((((*res_ptr) & mask) == 0) && !ret) { 398 *res_ptr |= mask; /* mark resources busy! */ 399 pide = tpide; 400 break; 401 } 402 mask >>= o; 403 bitshiftcnt += o; 404 if (mask == 0) { 405 mask = RESMAP_MASK(bits_wanted); 406 bitshiftcnt=0; 407 res_ptr++; 408 } 409 } 410 /* look in the same word on the next pass */ 411 ioc->res_bitshift = bitshiftcnt + bits_wanted; 412 } 413 414 /* wrapped ? */ 415 if (res_end <= res_ptr) { 416 ioc->res_hint = (unsigned long *) ioc->res_map; 417 ioc->res_bitshift = 0; 418 } else { 419 ioc->res_hint = res_ptr; 420 } 421 return (pide); 422 } 423 424 425 /** 426 * sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap 427 * @ioc: IO MMU structure which owns the pdir we are interested in. 428 * @size: number of bytes to create a mapping for 429 * 430 * Given a size, find consecutive unmarked and then mark those bits in the 431 * resource bit map. 432 */ 433 static int 434 sba_alloc_range(struct ioc *ioc, struct device *dev, size_t size) 435 { 436 unsigned int pages_needed = size >> IOVP_SHIFT; 437 #ifdef SBA_COLLECT_STATS 438 unsigned long cr_start = mfctl(16); 439 #endif 440 unsigned long pide; 441 442 pide = sba_search_bitmap(ioc, dev, pages_needed); 443 if (pide >= (ioc->res_size << 3)) { 444 pide = sba_search_bitmap(ioc, dev, pages_needed); 445 if (pide >= (ioc->res_size << 3)) 446 panic("%s: I/O MMU @ %p is out of mapping resources\n", 447 __FILE__, ioc->ioc_hpa); 448 } 449 450 #ifdef ASSERT_PDIR_SANITY 451 /* verify the first enable bit is clear */ 452 if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) { 453 sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide); 454 } 455 #endif 456 457 DBG_RES("%s(%x) %d -> %lx hint %x/%x\n", 458 __func__, size, pages_needed, pide, 459 (uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map), 460 ioc->res_bitshift ); 461 462 #ifdef SBA_COLLECT_STATS 463 { 464 unsigned long cr_end = mfctl(16); 465 unsigned long tmp = cr_end - cr_start; 466 /* check for roll over */ 467 cr_start = (cr_end < cr_start) ? -(tmp) : (tmp); 468 } 469 ioc->avg_search[ioc->avg_idx++] = cr_start; 470 ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1; 471 472 ioc->used_pages += pages_needed; 473 #endif 474 475 return (pide); 476 } 477 478 479 /** 480 * sba_free_range - unmark bits in IO PDIR resource bitmap 481 * @ioc: IO MMU structure which owns the pdir we are interested in. 482 * @iova: IO virtual address which was previously allocated. 483 * @size: number of bytes to create a mapping for 484 * 485 * clear bits in the ioc's resource map 486 */ 487 static SBA_INLINE void 488 sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size) 489 { 490 unsigned long iovp = SBA_IOVP(ioc, iova); 491 unsigned int pide = PDIR_INDEX(iovp); 492 unsigned int ridx = pide >> 3; /* convert bit to byte address */ 493 unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]); 494 495 int bits_not_wanted = size >> IOVP_SHIFT; 496 497 /* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */ 498 unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1)); 499 500 DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n", 501 __func__, (uint) iova, size, 502 bits_not_wanted, m, pide, res_ptr, *res_ptr); 503 504 #ifdef SBA_COLLECT_STATS 505 ioc->used_pages -= bits_not_wanted; 506 #endif 507 508 *res_ptr &= ~m; 509 } 510 511 512 /************************************************************** 513 * 514 * "Dynamic DMA Mapping" support (aka "Coherent I/O") 515 * 516 ***************************************************************/ 517 518 #ifdef SBA_HINT_SUPPORT 519 #define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir) 520 #endif 521 522 typedef unsigned long space_t; 523 #define KERNEL_SPACE 0 524 525 /** 526 * sba_io_pdir_entry - fill in one IO PDIR entry 527 * @pdir_ptr: pointer to IO PDIR entry 528 * @sid: process Space ID - currently only support KERNEL_SPACE 529 * @vba: Virtual CPU address of buffer to map 530 * @hint: DMA hint set to use for this mapping 531 * 532 * SBA Mapping Routine 533 * 534 * Given a virtual address (vba, arg2) and space id, (sid, arg1) 535 * sba_io_pdir_entry() loads the I/O PDIR entry pointed to by 536 * pdir_ptr (arg0). 537 * Using the bass-ackwards HP bit numbering, Each IO Pdir entry 538 * for Astro/Ike looks like: 539 * 540 * 541 * 0 19 51 55 63 542 * +-+---------------------+----------------------------------+----+--------+ 543 * |V| U | PPN[43:12] | U | VI | 544 * +-+---------------------+----------------------------------+----+--------+ 545 * 546 * Pluto is basically identical, supports fewer physical address bits: 547 * 548 * 0 23 51 55 63 549 * +-+------------------------+-------------------------------+----+--------+ 550 * |V| U | PPN[39:12] | U | VI | 551 * +-+------------------------+-------------------------------+----+--------+ 552 * 553 * V == Valid Bit (Most Significant Bit is bit 0) 554 * U == Unused 555 * PPN == Physical Page Number 556 * VI == Virtual Index (aka Coherent Index) 557 * 558 * LPA instruction output is put into PPN field. 559 * LCI (Load Coherence Index) instruction provides the "VI" bits. 560 * 561 * We pre-swap the bytes since PCX-W is Big Endian and the 562 * IOMMU uses little endian for the pdir. 563 */ 564 565 static void SBA_INLINE 566 sba_io_pdir_entry(u64 *pdir_ptr, space_t sid, unsigned long vba, 567 unsigned long hint) 568 { 569 u64 pa; /* physical address */ 570 register unsigned ci; /* coherent index */ 571 572 pa = lpa(vba); 573 pa &= IOVP_MASK; 574 575 asm("lci 0(%1), %0" : "=r" (ci) : "r" (vba)); 576 pa |= (ci >> PAGE_SHIFT) & 0xff; /* move CI (8 bits) into lowest byte */ 577 578 pa |= SBA_PDIR_VALID_BIT; /* set "valid" bit */ 579 *pdir_ptr = cpu_to_le64(pa); /* swap and store into I/O Pdir */ 580 581 /* 582 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set 583 * (bit #61, big endian), we have to flush and sync every time 584 * IO-PDIR is changed in Ike/Astro. 585 */ 586 asm_io_fdc(pdir_ptr); 587 } 588 589 590 /** 591 * sba_mark_invalid - invalidate one or more IO PDIR entries 592 * @ioc: IO MMU structure which owns the pdir we are interested in. 593 * @iova: IO Virtual Address mapped earlier 594 * @byte_cnt: number of bytes this mapping covers. 595 * 596 * Marking the IO PDIR entry(ies) as Invalid and invalidate 597 * corresponding IO TLB entry. The Ike PCOM (Purge Command Register) 598 * is to purge stale entries in the IO TLB when unmapping entries. 599 * 600 * The PCOM register supports purging of multiple pages, with a minium 601 * of 1 page and a maximum of 2GB. Hardware requires the address be 602 * aligned to the size of the range being purged. The size of the range 603 * must be a power of 2. The "Cool perf optimization" in the 604 * allocation routine helps keep that true. 605 */ 606 static SBA_INLINE void 607 sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt) 608 { 609 u32 iovp = (u32) SBA_IOVP(ioc,iova); 610 u64 *pdir_ptr = &ioc->pdir_base[PDIR_INDEX(iovp)]; 611 612 #ifdef ASSERT_PDIR_SANITY 613 /* Assert first pdir entry is set. 614 ** 615 ** Even though this is a big-endian machine, the entries 616 ** in the iopdir are little endian. That's why we look at 617 ** the byte at +7 instead of at +0. 618 */ 619 if (0x80 != (((u8 *) pdir_ptr)[7])) { 620 sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp)); 621 } 622 #endif 623 624 if (byte_cnt > IOVP_SIZE) 625 { 626 #if 0 627 unsigned long entries_per_cacheline = ioc_needs_fdc ? 628 L1_CACHE_ALIGN(((unsigned long) pdir_ptr)) 629 - (unsigned long) pdir_ptr; 630 : 262144; 631 #endif 632 633 /* set "size" field for PCOM */ 634 iovp |= get_order(byte_cnt) + PAGE_SHIFT; 635 636 do { 637 /* clear I/O Pdir entry "valid" bit first */ 638 ((u8 *) pdir_ptr)[7] = 0; 639 asm_io_fdc(pdir_ptr); 640 if (ioc_needs_fdc) { 641 #if 0 642 entries_per_cacheline = L1_CACHE_SHIFT - 3; 643 #endif 644 } 645 pdir_ptr++; 646 byte_cnt -= IOVP_SIZE; 647 } while (byte_cnt > IOVP_SIZE); 648 } else 649 iovp |= IOVP_SHIFT; /* set "size" field for PCOM */ 650 651 /* 652 ** clear I/O PDIR entry "valid" bit. 653 ** We have to R/M/W the cacheline regardless how much of the 654 ** pdir entry that we clobber. 655 ** The rest of the entry would be useful for debugging if we 656 ** could dump core on HPMC. 657 */ 658 ((u8 *) pdir_ptr)[7] = 0; 659 asm_io_fdc(pdir_ptr); 660 661 WRITE_REG( SBA_IOVA(ioc, iovp, 0, 0), ioc->ioc_hpa+IOC_PCOM); 662 } 663 664 /** 665 * sba_dma_supported - PCI driver can query DMA support 666 * @dev: instance of PCI owned by the driver that's asking 667 * @mask: number of address bits this PCI device can handle 668 * 669 * See Documentation/core-api/dma-api-howto.rst 670 */ 671 static int sba_dma_supported( struct device *dev, u64 mask) 672 { 673 struct ioc *ioc; 674 675 if (dev == NULL) { 676 printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n"); 677 BUG(); 678 return(0); 679 } 680 681 ioc = GET_IOC(dev); 682 if (!ioc) 683 return 0; 684 685 /* 686 * check if mask is >= than the current max IO Virt Address 687 * The max IO Virt address will *always* < 30 bits. 688 */ 689 return((int)(mask >= (ioc->ibase - 1 + 690 (ioc->pdir_size / sizeof(u64) * IOVP_SIZE) ))); 691 } 692 693 694 /** 695 * sba_map_single - map one buffer and return IOVA for DMA 696 * @dev: instance of PCI owned by the driver that's asking. 697 * @addr: driver buffer to map. 698 * @size: number of bytes to map in driver buffer. 699 * @direction: R/W or both. 700 * 701 * See Documentation/core-api/dma-api-howto.rst 702 */ 703 static dma_addr_t 704 sba_map_single(struct device *dev, void *addr, size_t size, 705 enum dma_data_direction direction) 706 { 707 struct ioc *ioc; 708 unsigned long flags; 709 dma_addr_t iovp; 710 dma_addr_t offset; 711 u64 *pdir_start; 712 int pide; 713 714 ioc = GET_IOC(dev); 715 if (!ioc) 716 return DMA_MAPPING_ERROR; 717 718 /* save offset bits */ 719 offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK; 720 721 /* round up to nearest IOVP_SIZE */ 722 size = (size + offset + ~IOVP_MASK) & IOVP_MASK; 723 724 spin_lock_irqsave(&ioc->res_lock, flags); 725 #ifdef ASSERT_PDIR_SANITY 726 sba_check_pdir(ioc,"Check before sba_map_single()"); 727 #endif 728 729 #ifdef SBA_COLLECT_STATS 730 ioc->msingle_calls++; 731 ioc->msingle_pages += size >> IOVP_SHIFT; 732 #endif 733 pide = sba_alloc_range(ioc, dev, size); 734 iovp = (dma_addr_t) pide << IOVP_SHIFT; 735 736 DBG_RUN("%s() 0x%p -> 0x%lx\n", 737 __func__, addr, (long) iovp | offset); 738 739 pdir_start = &(ioc->pdir_base[pide]); 740 741 while (size > 0) { 742 sba_io_pdir_entry(pdir_start, KERNEL_SPACE, (unsigned long) addr, 0); 743 744 DBG_RUN(" pdir 0x%p %02x%02x%02x%02x%02x%02x%02x%02x\n", 745 pdir_start, 746 (u8) (((u8 *) pdir_start)[7]), 747 (u8) (((u8 *) pdir_start)[6]), 748 (u8) (((u8 *) pdir_start)[5]), 749 (u8) (((u8 *) pdir_start)[4]), 750 (u8) (((u8 *) pdir_start)[3]), 751 (u8) (((u8 *) pdir_start)[2]), 752 (u8) (((u8 *) pdir_start)[1]), 753 (u8) (((u8 *) pdir_start)[0]) 754 ); 755 756 addr += IOVP_SIZE; 757 size -= IOVP_SIZE; 758 pdir_start++; 759 } 760 761 /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ 762 asm_io_sync(); 763 764 #ifdef ASSERT_PDIR_SANITY 765 sba_check_pdir(ioc,"Check after sba_map_single()"); 766 #endif 767 spin_unlock_irqrestore(&ioc->res_lock, flags); 768 769 /* form complete address */ 770 return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG); 771 } 772 773 774 static dma_addr_t 775 sba_map_page(struct device *dev, struct page *page, unsigned long offset, 776 size_t size, enum dma_data_direction direction, 777 unsigned long attrs) 778 { 779 return sba_map_single(dev, page_address(page) + offset, size, 780 direction); 781 } 782 783 784 /** 785 * sba_unmap_page - unmap one IOVA and free resources 786 * @dev: instance of PCI owned by the driver that's asking. 787 * @iova: IOVA of driver buffer previously mapped. 788 * @size: number of bytes mapped in driver buffer. 789 * @direction: R/W or both. 790 * 791 * See Documentation/core-api/dma-api-howto.rst 792 */ 793 static void 794 sba_unmap_page(struct device *dev, dma_addr_t iova, size_t size, 795 enum dma_data_direction direction, unsigned long attrs) 796 { 797 struct ioc *ioc; 798 #if DELAYED_RESOURCE_CNT > 0 799 struct sba_dma_pair *d; 800 #endif 801 unsigned long flags; 802 dma_addr_t offset; 803 804 DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size); 805 806 ioc = GET_IOC(dev); 807 if (!ioc) { 808 WARN_ON(!ioc); 809 return; 810 } 811 offset = iova & ~IOVP_MASK; 812 iova ^= offset; /* clear offset bits */ 813 size += offset; 814 size = ALIGN(size, IOVP_SIZE); 815 816 spin_lock_irqsave(&ioc->res_lock, flags); 817 818 #ifdef SBA_COLLECT_STATS 819 ioc->usingle_calls++; 820 ioc->usingle_pages += size >> IOVP_SHIFT; 821 #endif 822 823 sba_mark_invalid(ioc, iova, size); 824 825 #if DELAYED_RESOURCE_CNT > 0 826 /* Delaying when we re-use a IO Pdir entry reduces the number 827 * of MMIO reads needed to flush writes to the PCOM register. 828 */ 829 d = &(ioc->saved[ioc->saved_cnt]); 830 d->iova = iova; 831 d->size = size; 832 if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) { 833 int cnt = ioc->saved_cnt; 834 while (cnt--) { 835 sba_free_range(ioc, d->iova, d->size); 836 d--; 837 } 838 ioc->saved_cnt = 0; 839 840 READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ 841 } 842 #else /* DELAYED_RESOURCE_CNT == 0 */ 843 sba_free_range(ioc, iova, size); 844 845 /* If fdc's were issued, force fdc's to be visible now */ 846 asm_io_sync(); 847 848 READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */ 849 #endif /* DELAYED_RESOURCE_CNT == 0 */ 850 851 spin_unlock_irqrestore(&ioc->res_lock, flags); 852 853 /* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support. 854 ** For Astro based systems this isn't a big deal WRT performance. 855 ** As long as 2.4 kernels copyin/copyout data from/to userspace, 856 ** we don't need the syncdma. The issue here is I/O MMU cachelines 857 ** are *not* coherent in all cases. May be hwrev dependent. 858 ** Need to investigate more. 859 asm volatile("syncdma"); 860 */ 861 } 862 863 864 /** 865 * sba_alloc - allocate/map shared mem for DMA 866 * @hwdev: instance of PCI owned by the driver that's asking. 867 * @size: number of bytes mapped in driver buffer. 868 * @dma_handle: IOVA of new buffer. 869 * 870 * See Documentation/core-api/dma-api-howto.rst 871 */ 872 static void *sba_alloc(struct device *hwdev, size_t size, dma_addr_t *dma_handle, 873 gfp_t gfp, unsigned long attrs) 874 { 875 void *ret; 876 877 if (!hwdev) { 878 /* only support PCI */ 879 *dma_handle = 0; 880 return NULL; 881 } 882 883 ret = (void *) __get_free_pages(gfp, get_order(size)); 884 885 if (ret) { 886 memset(ret, 0, size); 887 *dma_handle = sba_map_single(hwdev, ret, size, 0); 888 } 889 890 return ret; 891 } 892 893 894 /** 895 * sba_free - free/unmap shared mem for DMA 896 * @hwdev: instance of PCI owned by the driver that's asking. 897 * @size: number of bytes mapped in driver buffer. 898 * @vaddr: virtual address IOVA of "consistent" buffer. 899 * @dma_handler: IO virtual address of "consistent" buffer. 900 * 901 * See Documentation/core-api/dma-api-howto.rst 902 */ 903 static void 904 sba_free(struct device *hwdev, size_t size, void *vaddr, 905 dma_addr_t dma_handle, unsigned long attrs) 906 { 907 sba_unmap_page(hwdev, dma_handle, size, 0, 0); 908 free_pages((unsigned long) vaddr, get_order(size)); 909 } 910 911 912 /* 913 ** Since 0 is a valid pdir_base index value, can't use that 914 ** to determine if a value is valid or not. Use a flag to indicate 915 ** the SG list entry contains a valid pdir index. 916 */ 917 #define PIDE_FLAG 0x80000000UL 918 919 #ifdef SBA_COLLECT_STATS 920 #define IOMMU_MAP_STATS 921 #endif 922 #include "iommu-helpers.h" 923 924 #ifdef DEBUG_LARGE_SG_ENTRIES 925 int dump_run_sg = 0; 926 #endif 927 928 929 /** 930 * sba_map_sg - map Scatter/Gather list 931 * @dev: instance of PCI owned by the driver that's asking. 932 * @sglist: array of buffer/length pairs 933 * @nents: number of entries in list 934 * @direction: R/W or both. 935 * 936 * See Documentation/core-api/dma-api-howto.rst 937 */ 938 static int 939 sba_map_sg(struct device *dev, struct scatterlist *sglist, int nents, 940 enum dma_data_direction direction, unsigned long attrs) 941 { 942 struct ioc *ioc; 943 int coalesced, filled = 0; 944 unsigned long flags; 945 946 DBG_RUN_SG("%s() START %d entries\n", __func__, nents); 947 948 ioc = GET_IOC(dev); 949 if (!ioc) 950 return -EINVAL; 951 952 /* Fast path single entry scatterlists. */ 953 if (nents == 1) { 954 sg_dma_address(sglist) = sba_map_single(dev, sg_virt(sglist), 955 sglist->length, direction); 956 sg_dma_len(sglist) = sglist->length; 957 return 1; 958 } 959 960 spin_lock_irqsave(&ioc->res_lock, flags); 961 962 #ifdef ASSERT_PDIR_SANITY 963 if (sba_check_pdir(ioc,"Check before sba_map_sg()")) 964 { 965 sba_dump_sg(ioc, sglist, nents); 966 panic("Check before sba_map_sg()"); 967 } 968 #endif 969 970 #ifdef SBA_COLLECT_STATS 971 ioc->msg_calls++; 972 #endif 973 974 /* 975 ** First coalesce the chunks and allocate I/O pdir space 976 ** 977 ** If this is one DMA stream, we can properly map using the 978 ** correct virtual address associated with each DMA page. 979 ** w/o this association, we wouldn't have coherent DMA! 980 ** Access to the virtual address is what forces a two pass algorithm. 981 */ 982 coalesced = iommu_coalesce_chunks(ioc, dev, sglist, nents, sba_alloc_range); 983 984 /* 985 ** Program the I/O Pdir 986 ** 987 ** map the virtual addresses to the I/O Pdir 988 ** o dma_address will contain the pdir index 989 ** o dma_len will contain the number of bytes to map 990 ** o address contains the virtual address. 991 */ 992 filled = iommu_fill_pdir(ioc, sglist, nents, 0, sba_io_pdir_entry); 993 994 /* force FDC ops in io_pdir_entry() to be visible to IOMMU */ 995 asm_io_sync(); 996 997 #ifdef ASSERT_PDIR_SANITY 998 if (sba_check_pdir(ioc,"Check after sba_map_sg()")) 999 { 1000 sba_dump_sg(ioc, sglist, nents); 1001 panic("Check after sba_map_sg()\n"); 1002 } 1003 #endif 1004 1005 spin_unlock_irqrestore(&ioc->res_lock, flags); 1006 1007 DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled); 1008 1009 return filled; 1010 } 1011 1012 1013 /** 1014 * sba_unmap_sg - unmap Scatter/Gather list 1015 * @dev: instance of PCI owned by the driver that's asking. 1016 * @sglist: array of buffer/length pairs 1017 * @nents: number of entries in list 1018 * @direction: R/W or both. 1019 * 1020 * See Documentation/core-api/dma-api-howto.rst 1021 */ 1022 static void 1023 sba_unmap_sg(struct device *dev, struct scatterlist *sglist, int nents, 1024 enum dma_data_direction direction, unsigned long attrs) 1025 { 1026 struct ioc *ioc; 1027 #ifdef ASSERT_PDIR_SANITY 1028 unsigned long flags; 1029 #endif 1030 1031 DBG_RUN_SG("%s() START %d entries, %p,%x\n", 1032 __func__, nents, sg_virt(sglist), sglist->length); 1033 1034 ioc = GET_IOC(dev); 1035 if (!ioc) { 1036 WARN_ON(!ioc); 1037 return; 1038 } 1039 1040 #ifdef SBA_COLLECT_STATS 1041 ioc->usg_calls++; 1042 #endif 1043 1044 #ifdef ASSERT_PDIR_SANITY 1045 spin_lock_irqsave(&ioc->res_lock, flags); 1046 sba_check_pdir(ioc,"Check before sba_unmap_sg()"); 1047 spin_unlock_irqrestore(&ioc->res_lock, flags); 1048 #endif 1049 1050 while (nents && sg_dma_len(sglist)) { 1051 1052 sba_unmap_page(dev, sg_dma_address(sglist), sg_dma_len(sglist), 1053 direction, 0); 1054 #ifdef SBA_COLLECT_STATS 1055 ioc->usg_pages += ((sg_dma_address(sglist) & ~IOVP_MASK) + sg_dma_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT; 1056 ioc->usingle_calls--; /* kluge since call is unmap_sg() */ 1057 #endif 1058 ++sglist; 1059 nents--; 1060 } 1061 1062 DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents); 1063 1064 #ifdef ASSERT_PDIR_SANITY 1065 spin_lock_irqsave(&ioc->res_lock, flags); 1066 sba_check_pdir(ioc,"Check after sba_unmap_sg()"); 1067 spin_unlock_irqrestore(&ioc->res_lock, flags); 1068 #endif 1069 1070 } 1071 1072 static const struct dma_map_ops sba_ops = { 1073 .dma_supported = sba_dma_supported, 1074 .alloc = sba_alloc, 1075 .free = sba_free, 1076 .map_page = sba_map_page, 1077 .unmap_page = sba_unmap_page, 1078 .map_sg = sba_map_sg, 1079 .unmap_sg = sba_unmap_sg, 1080 .get_sgtable = dma_common_get_sgtable, 1081 .alloc_pages = dma_common_alloc_pages, 1082 .free_pages = dma_common_free_pages, 1083 }; 1084 1085 1086 /************************************************************************** 1087 ** 1088 ** SBA PAT PDC support 1089 ** 1090 ** o call pdc_pat_cell_module() 1091 ** o store ranges in PCI "resource" structures 1092 ** 1093 **************************************************************************/ 1094 1095 static void 1096 sba_get_pat_resources(struct sba_device *sba_dev) 1097 { 1098 #if 0 1099 /* 1100 ** TODO/REVISIT/FIXME: support for directed ranges requires calls to 1101 ** PAT PDC to program the SBA/LBA directed range registers...this 1102 ** burden may fall on the LBA code since it directly supports the 1103 ** PCI subsystem. It's not clear yet. - ggg 1104 */ 1105 PAT_MOD(mod)->mod_info.mod_pages = PAT_GET_MOD_PAGES(temp); 1106 FIXME : ??? 1107 PAT_MOD(mod)->mod_info.dvi = PAT_GET_DVI(temp); 1108 Tells where the dvi bits are located in the address. 1109 PAT_MOD(mod)->mod_info.ioc = PAT_GET_IOC(temp); 1110 FIXME : ??? 1111 #endif 1112 } 1113 1114 1115 /************************************************************** 1116 * 1117 * Initialization and claim 1118 * 1119 ***************************************************************/ 1120 #define PIRANHA_ADDR_MASK 0x00160000UL /* bit 17,18,20 */ 1121 #define PIRANHA_ADDR_VAL 0x00060000UL /* bit 17,18 on */ 1122 static void * 1123 sba_alloc_pdir(unsigned int pdir_size) 1124 { 1125 unsigned long pdir_base; 1126 unsigned long pdir_order = get_order(pdir_size); 1127 1128 pdir_base = __get_free_pages(GFP_KERNEL, pdir_order); 1129 if (NULL == (void *) pdir_base) { 1130 panic("%s() could not allocate I/O Page Table\n", 1131 __func__); 1132 } 1133 1134 /* If this is not PA8700 (PCX-W2) 1135 ** OR newer than ver 2.2 1136 ** OR in a system that doesn't need VINDEX bits from SBA, 1137 ** 1138 ** then we aren't exposed to the HW bug. 1139 */ 1140 if ( ((boot_cpu_data.pdc.cpuid >> 5) & 0x7f) != 0x13 1141 || (boot_cpu_data.pdc.versions > 0x202) 1142 || (boot_cpu_data.pdc.capabilities & 0x08L) ) 1143 return (void *) pdir_base; 1144 1145 /* 1146 * PA8700 (PCX-W2, aka piranha) silent data corruption fix 1147 * 1148 * An interaction between PA8700 CPU (Ver 2.2 or older) and 1149 * Ike/Astro can cause silent data corruption. This is only 1150 * a problem if the I/O PDIR is located in memory such that 1151 * (little-endian) bits 17 and 18 are on and bit 20 is off. 1152 * 1153 * Since the max IO Pdir size is 2MB, by cleverly allocating the 1154 * right physical address, we can either avoid (IOPDIR <= 1MB) 1155 * or minimize (2MB IO Pdir) the problem if we restrict the 1156 * IO Pdir to a maximum size of 2MB-128K (1902K). 1157 * 1158 * Because we always allocate 2^N sized IO pdirs, either of the 1159 * "bad" regions will be the last 128K if at all. That's easy 1160 * to test for. 1161 * 1162 */ 1163 if (pdir_order <= (19-12)) { 1164 if (((virt_to_phys(pdir_base)+pdir_size-1) & PIRANHA_ADDR_MASK) == PIRANHA_ADDR_VAL) { 1165 /* allocate a new one on 512k alignment */ 1166 unsigned long new_pdir = __get_free_pages(GFP_KERNEL, (19-12)); 1167 /* release original */ 1168 free_pages(pdir_base, pdir_order); 1169 1170 pdir_base = new_pdir; 1171 1172 /* release excess */ 1173 while (pdir_order < (19-12)) { 1174 new_pdir += pdir_size; 1175 free_pages(new_pdir, pdir_order); 1176 pdir_order +=1; 1177 pdir_size <<=1; 1178 } 1179 } 1180 } else { 1181 /* 1182 ** 1MB or 2MB Pdir 1183 ** Needs to be aligned on an "odd" 1MB boundary. 1184 */ 1185 unsigned long new_pdir = __get_free_pages(GFP_KERNEL, pdir_order+1); /* 2 or 4MB */ 1186 1187 /* release original */ 1188 free_pages( pdir_base, pdir_order); 1189 1190 /* release first 1MB */ 1191 free_pages(new_pdir, 20-12); 1192 1193 pdir_base = new_pdir + 1024*1024; 1194 1195 if (pdir_order > (20-12)) { 1196 /* 1197 ** 2MB Pdir. 1198 ** 1199 ** Flag tells init_bitmap() to mark bad 128k as used 1200 ** and to reduce the size by 128k. 1201 */ 1202 piranha_bad_128k = 1; 1203 1204 new_pdir += 3*1024*1024; 1205 /* release last 1MB */ 1206 free_pages(new_pdir, 20-12); 1207 1208 /* release unusable 128KB */ 1209 free_pages(new_pdir - 128*1024 , 17-12); 1210 1211 pdir_size -= 128*1024; 1212 } 1213 } 1214 1215 memset((void *) pdir_base, 0, pdir_size); 1216 return (void *) pdir_base; 1217 } 1218 1219 struct ibase_data_struct { 1220 struct ioc *ioc; 1221 int ioc_num; 1222 }; 1223 1224 static int setup_ibase_imask_callback(struct device *dev, void *data) 1225 { 1226 /* lba_set_iregs() is in drivers/parisc/lba_pci.c */ 1227 extern void lba_set_iregs(struct parisc_device *, u32, u32); 1228 struct parisc_device *lba = to_parisc_device(dev); 1229 struct ibase_data_struct *ibd = data; 1230 int rope_num = (lba->hpa.start >> 13) & 0xf; 1231 if (rope_num >> 3 == ibd->ioc_num) 1232 lba_set_iregs(lba, ibd->ioc->ibase, ibd->ioc->imask); 1233 return 0; 1234 } 1235 1236 /* setup Mercury or Elroy IBASE/IMASK registers. */ 1237 static void 1238 setup_ibase_imask(struct parisc_device *sba, struct ioc *ioc, int ioc_num) 1239 { 1240 struct ibase_data_struct ibase_data = { 1241 .ioc = ioc, 1242 .ioc_num = ioc_num, 1243 }; 1244 1245 device_for_each_child(&sba->dev, &ibase_data, 1246 setup_ibase_imask_callback); 1247 } 1248 1249 #ifdef SBA_AGP_SUPPORT 1250 static int 1251 sba_ioc_find_quicksilver(struct device *dev, void *data) 1252 { 1253 int *agp_found = data; 1254 struct parisc_device *lba = to_parisc_device(dev); 1255 1256 if (IS_QUICKSILVER(lba)) 1257 *agp_found = 1; 1258 return 0; 1259 } 1260 #endif 1261 1262 static void 1263 sba_ioc_init_pluto(struct parisc_device *sba, struct ioc *ioc, int ioc_num) 1264 { 1265 u32 iova_space_mask; 1266 u32 iova_space_size; 1267 int iov_order, tcnfg; 1268 #ifdef SBA_AGP_SUPPORT 1269 int agp_found = 0; 1270 #endif 1271 /* 1272 ** Firmware programs the base and size of a "safe IOVA space" 1273 ** (one that doesn't overlap memory or LMMIO space) in the 1274 ** IBASE and IMASK registers. 1275 */ 1276 ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & ~0x1fffffULL; 1277 iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1; 1278 1279 if ((ioc->ibase < 0xfed00000UL) && ((ioc->ibase + iova_space_size) > 0xfee00000UL)) { 1280 printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n"); 1281 iova_space_size /= 2; 1282 } 1283 1284 /* 1285 ** iov_order is always based on a 1GB IOVA space since we want to 1286 ** turn on the other half for AGP GART. 1287 */ 1288 iov_order = get_order(iova_space_size >> (IOVP_SHIFT - PAGE_SHIFT)); 1289 ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64); 1290 1291 DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n", 1292 __func__, ioc->ioc_hpa, iova_space_size >> 20, 1293 iov_order + PAGE_SHIFT); 1294 1295 ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL, 1296 get_order(ioc->pdir_size)); 1297 if (!ioc->pdir_base) 1298 panic("Couldn't allocate I/O Page Table\n"); 1299 1300 memset(ioc->pdir_base, 0, ioc->pdir_size); 1301 1302 DBG_INIT("%s() pdir %p size %x\n", 1303 __func__, ioc->pdir_base, ioc->pdir_size); 1304 1305 #ifdef SBA_HINT_SUPPORT 1306 ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; 1307 ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); 1308 1309 DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n", 1310 ioc->hint_shift_pdir, ioc->hint_mask_pdir); 1311 #endif 1312 1313 WARN_ON((((unsigned long) ioc->pdir_base) & PAGE_MASK) != (unsigned long) ioc->pdir_base); 1314 WRITE_REG(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE); 1315 1316 /* build IMASK for IOC and Elroy */ 1317 iova_space_mask = 0xffffffff; 1318 iova_space_mask <<= (iov_order + PAGE_SHIFT); 1319 ioc->imask = iova_space_mask; 1320 #ifdef ZX1_SUPPORT 1321 ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1); 1322 #endif 1323 sba_dump_tlb(ioc->ioc_hpa); 1324 1325 setup_ibase_imask(sba, ioc, ioc_num); 1326 1327 WRITE_REG(ioc->imask, ioc->ioc_hpa + IOC_IMASK); 1328 1329 #ifdef CONFIG_64BIT 1330 /* 1331 ** Setting the upper bits makes checking for bypass addresses 1332 ** a little faster later on. 1333 */ 1334 ioc->imask |= 0xFFFFFFFF00000000UL; 1335 #endif 1336 1337 /* Set I/O PDIR Page size to system page size */ 1338 switch (PAGE_SHIFT) { 1339 case 12: tcnfg = 0; break; /* 4K */ 1340 case 13: tcnfg = 1; break; /* 8K */ 1341 case 14: tcnfg = 2; break; /* 16K */ 1342 case 16: tcnfg = 3; break; /* 64K */ 1343 default: 1344 panic(__FILE__ "Unsupported system page size %d", 1345 1 << PAGE_SHIFT); 1346 break; 1347 } 1348 WRITE_REG(tcnfg, ioc->ioc_hpa + IOC_TCNFG); 1349 1350 /* 1351 ** Program the IOC's ibase and enable IOVA translation 1352 ** Bit zero == enable bit. 1353 */ 1354 WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE); 1355 1356 /* 1357 ** Clear I/O TLB of any possible entries. 1358 ** (Yes. This is a bit paranoid...but so what) 1359 */ 1360 WRITE_REG(ioc->ibase | 31, ioc->ioc_hpa + IOC_PCOM); 1361 1362 #ifdef SBA_AGP_SUPPORT 1363 1364 /* 1365 ** If an AGP device is present, only use half of the IOV space 1366 ** for PCI DMA. Unfortunately we can't know ahead of time 1367 ** whether GART support will actually be used, for now we 1368 ** can just key on any AGP device found in the system. 1369 ** We program the next pdir index after we stop w/ a key for 1370 ** the GART code to handshake on. 1371 */ 1372 device_for_each_child(&sba->dev, &agp_found, sba_ioc_find_quicksilver); 1373 1374 if (agp_found && sba_reserve_agpgart) { 1375 printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n", 1376 __func__, (iova_space_size/2) >> 20); 1377 ioc->pdir_size /= 2; 1378 ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE; 1379 } 1380 #endif /*SBA_AGP_SUPPORT*/ 1381 } 1382 1383 static void 1384 sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num) 1385 { 1386 u32 iova_space_size, iova_space_mask; 1387 unsigned int pdir_size, iov_order, tcnfg; 1388 1389 /* 1390 ** Determine IOVA Space size from memory size. 1391 ** 1392 ** Ideally, PCI drivers would register the maximum number 1393 ** of DMA they can have outstanding for each device they 1394 ** own. Next best thing would be to guess how much DMA 1395 ** can be outstanding based on PCI Class/sub-class. Both 1396 ** methods still require some "extra" to support PCI 1397 ** Hot-Plug/Removal of PCI cards. (aka PCI OLARD). 1398 ** 1399 ** While we have 32-bits "IOVA" space, top two 2 bits are used 1400 ** for DMA hints - ergo only 30 bits max. 1401 */ 1402 1403 iova_space_size = (u32) (totalram_pages()/global_ioc_cnt); 1404 1405 /* limit IOVA space size to 1MB-1GB */ 1406 if (iova_space_size < (1 << (20 - PAGE_SHIFT))) { 1407 iova_space_size = 1 << (20 - PAGE_SHIFT); 1408 } 1409 else if (iova_space_size > (1 << (30 - PAGE_SHIFT))) { 1410 iova_space_size = 1 << (30 - PAGE_SHIFT); 1411 } 1412 1413 /* 1414 ** iova space must be log2() in size. 1415 ** thus, pdir/res_map will also be log2(). 1416 ** PIRANHA BUG: Exception is when IO Pdir is 2MB (gets reduced) 1417 */ 1418 iov_order = get_order(iova_space_size << PAGE_SHIFT); 1419 1420 /* iova_space_size is now bytes, not pages */ 1421 iova_space_size = 1 << (iov_order + PAGE_SHIFT); 1422 1423 ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64); 1424 1425 DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n", 1426 __func__, 1427 ioc->ioc_hpa, 1428 (unsigned long) totalram_pages() >> (20 - PAGE_SHIFT), 1429 iova_space_size>>20, 1430 iov_order + PAGE_SHIFT); 1431 1432 ioc->pdir_base = sba_alloc_pdir(pdir_size); 1433 1434 DBG_INIT("%s() pdir %p size %x\n", 1435 __func__, ioc->pdir_base, pdir_size); 1436 1437 #ifdef SBA_HINT_SUPPORT 1438 /* FIXME : DMA HINTs not used */ 1439 ioc->hint_shift_pdir = iov_order + PAGE_SHIFT; 1440 ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT)); 1441 1442 DBG_INIT(" hint_shift_pdir %x hint_mask_pdir %lx\n", 1443 ioc->hint_shift_pdir, ioc->hint_mask_pdir); 1444 #endif 1445 1446 WRITE_REG64(virt_to_phys(ioc->pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE); 1447 1448 /* build IMASK for IOC and Elroy */ 1449 iova_space_mask = 0xffffffff; 1450 iova_space_mask <<= (iov_order + PAGE_SHIFT); 1451 1452 /* 1453 ** On C3000 w/512MB mem, HP-UX 10.20 reports: 1454 ** ibase=0, imask=0xFE000000, size=0x2000000. 1455 */ 1456 ioc->ibase = 0; 1457 ioc->imask = iova_space_mask; /* save it */ 1458 #ifdef ZX1_SUPPORT 1459 ioc->iovp_mask = ~(iova_space_mask + PAGE_SIZE - 1); 1460 #endif 1461 1462 DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n", 1463 __func__, ioc->ibase, ioc->imask); 1464 1465 /* 1466 ** FIXME: Hint registers are programmed with default hint 1467 ** values during boot, so hints should be sane even if we 1468 ** can't reprogram them the way drivers want. 1469 */ 1470 1471 setup_ibase_imask(sba, ioc, ioc_num); 1472 1473 /* 1474 ** Program the IOC's ibase and enable IOVA translation 1475 */ 1476 WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE); 1477 WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK); 1478 1479 /* Set I/O PDIR Page size to system page size */ 1480 switch (PAGE_SHIFT) { 1481 case 12: tcnfg = 0; break; /* 4K */ 1482 case 13: tcnfg = 1; break; /* 8K */ 1483 case 14: tcnfg = 2; break; /* 16K */ 1484 case 16: tcnfg = 3; break; /* 64K */ 1485 default: 1486 panic(__FILE__ "Unsupported system page size %d", 1487 1 << PAGE_SHIFT); 1488 break; 1489 } 1490 /* Set I/O PDIR Page size to PAGE_SIZE (4k/16k/...) */ 1491 WRITE_REG(tcnfg, ioc->ioc_hpa+IOC_TCNFG); 1492 1493 /* 1494 ** Clear I/O TLB of any possible entries. 1495 ** (Yes. This is a bit paranoid...but so what) 1496 */ 1497 WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM); 1498 1499 ioc->ibase = 0; /* used by SBA_IOVA and related macros */ 1500 1501 DBG_INIT("%s() DONE\n", __func__); 1502 } 1503 1504 1505 1506 /************************************************************************** 1507 ** 1508 ** SBA initialization code (HW and SW) 1509 ** 1510 ** o identify SBA chip itself 1511 ** o initialize SBA chip modes (HardFail) 1512 ** o initialize SBA chip modes (HardFail) 1513 ** o FIXME: initialize DMA hints for reasonable defaults 1514 ** 1515 **************************************************************************/ 1516 1517 static void __iomem *ioc_remap(struct sba_device *sba_dev, unsigned int offset) 1518 { 1519 return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE); 1520 } 1521 1522 static void sba_hw_init(struct sba_device *sba_dev) 1523 { 1524 int i; 1525 int num_ioc; 1526 u64 ioc_ctl; 1527 1528 if (!is_pdc_pat()) { 1529 /* Shutdown the USB controller on Astro-based workstations. 1530 ** Once we reprogram the IOMMU, the next DMA performed by 1531 ** USB will HPMC the box. USB is only enabled if a 1532 ** keyboard is present and found. 1533 ** 1534 ** With serial console, j6k v5.0 firmware says: 1535 ** mem_kbd hpa 0xfee003f8 sba 0x0 pad 0x0 cl_class 0x7 1536 ** 1537 ** FIXME: Using GFX+USB console at power up but direct 1538 ** linux to serial console is still broken. 1539 ** USB could generate DMA so we must reset USB. 1540 ** The proper sequence would be: 1541 ** o block console output 1542 ** o reset USB device 1543 ** o reprogram serial port 1544 ** o unblock console output 1545 */ 1546 if (PAGE0->mem_kbd.cl_class == CL_KEYBD) { 1547 pdc_io_reset_devices(); 1548 } 1549 1550 } 1551 1552 1553 #if 0 1554 printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa, 1555 PAGE0->mem_boot.spa, PAGE0->mem_boot.pad, PAGE0->mem_boot.cl_class); 1556 1557 /* 1558 ** Need to deal with DMA from LAN. 1559 ** Maybe use page zero boot device as a handle to talk 1560 ** to PDC about which device to shutdown. 1561 ** 1562 ** Netbooting, j6k v5.0 firmware says: 1563 ** mem_boot hpa 0xf4008000 sba 0x0 pad 0x0 cl_class 0x1002 1564 ** ARGH! invalid class. 1565 */ 1566 if ((PAGE0->mem_boot.cl_class != CL_RANDOM) 1567 && (PAGE0->mem_boot.cl_class != CL_SEQU)) { 1568 pdc_io_reset(); 1569 } 1570 #endif 1571 1572 if (!IS_PLUTO(sba_dev->dev)) { 1573 ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL); 1574 DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->", 1575 __func__, sba_dev->sba_hpa, ioc_ctl); 1576 ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE); 1577 ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC; 1578 /* j6700 v1.6 firmware sets 0x294f */ 1579 /* A500 firmware sets 0x4d */ 1580 1581 WRITE_REG(ioc_ctl, sba_dev->sba_hpa+IOC_CTRL); 1582 1583 #ifdef DEBUG_SBA_INIT 1584 ioc_ctl = READ_REG64(sba_dev->sba_hpa+IOC_CTRL); 1585 DBG_INIT(" 0x%Lx\n", ioc_ctl); 1586 #endif 1587 } /* if !PLUTO */ 1588 1589 if (IS_ASTRO(sba_dev->dev)) { 1590 int err; 1591 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, ASTRO_IOC_OFFSET); 1592 num_ioc = 1; 1593 1594 sba_dev->chip_resv.name = "Astro Intr Ack"; 1595 sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfef00000UL; 1596 sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff000000UL - 1) ; 1597 err = request_resource(&iomem_resource, &(sba_dev->chip_resv)); 1598 BUG_ON(err < 0); 1599 1600 } else if (IS_PLUTO(sba_dev->dev)) { 1601 int err; 1602 1603 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, PLUTO_IOC_OFFSET); 1604 num_ioc = 1; 1605 1606 sba_dev->chip_resv.name = "Pluto Intr/PIOP/VGA"; 1607 sba_dev->chip_resv.start = PCI_F_EXTEND | 0xfee00000UL; 1608 sba_dev->chip_resv.end = PCI_F_EXTEND | (0xff200000UL - 1); 1609 err = request_resource(&iomem_resource, &(sba_dev->chip_resv)); 1610 WARN_ON(err < 0); 1611 1612 sba_dev->iommu_resv.name = "IOVA Space"; 1613 sba_dev->iommu_resv.start = 0x40000000UL; 1614 sba_dev->iommu_resv.end = 0x50000000UL - 1; 1615 err = request_resource(&iomem_resource, &(sba_dev->iommu_resv)); 1616 WARN_ON(err < 0); 1617 } else { 1618 /* IKE, REO */ 1619 sba_dev->ioc[0].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(0)); 1620 sba_dev->ioc[1].ioc_hpa = ioc_remap(sba_dev, IKE_IOC_OFFSET(1)); 1621 num_ioc = 2; 1622 1623 /* TODO - LOOKUP Ike/Stretch chipset mem map */ 1624 } 1625 /* XXX: What about Reo Grande? */ 1626 1627 sba_dev->num_ioc = num_ioc; 1628 for (i = 0; i < num_ioc; i++) { 1629 void __iomem *ioc_hpa = sba_dev->ioc[i].ioc_hpa; 1630 unsigned int j; 1631 1632 for (j=0; j < sizeof(u64) * ROPES_PER_IOC; j+=sizeof(u64)) { 1633 1634 /* 1635 * Clear ROPE(N)_CONFIG AO bit. 1636 * Disables "NT Ordering" (~= !"Relaxed Ordering") 1637 * Overrides bit 1 in DMA Hint Sets. 1638 * Improves netperf UDP_STREAM by ~10% for bcm5701. 1639 */ 1640 if (IS_PLUTO(sba_dev->dev)) { 1641 void __iomem *rope_cfg; 1642 unsigned long cfg_val; 1643 1644 rope_cfg = ioc_hpa + IOC_ROPE0_CFG + j; 1645 cfg_val = READ_REG(rope_cfg); 1646 cfg_val &= ~IOC_ROPE_AO; 1647 WRITE_REG(cfg_val, rope_cfg); 1648 } 1649 1650 /* 1651 ** Make sure the box crashes on rope errors. 1652 */ 1653 WRITE_REG(HF_ENABLE, ioc_hpa + ROPE0_CTL + j); 1654 } 1655 1656 /* flush out the last writes */ 1657 READ_REG(sba_dev->ioc[i].ioc_hpa + ROPE7_CTL); 1658 1659 DBG_INIT(" ioc[%d] ROPE_CFG 0x%Lx ROPE_DBG 0x%Lx\n", 1660 i, 1661 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x40), 1662 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x50) 1663 ); 1664 DBG_INIT(" STATUS_CONTROL 0x%Lx FLUSH_CTRL 0x%Lx\n", 1665 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x108), 1666 READ_REG(sba_dev->ioc[i].ioc_hpa + 0x400) 1667 ); 1668 1669 if (IS_PLUTO(sba_dev->dev)) { 1670 sba_ioc_init_pluto(sba_dev->dev, &(sba_dev->ioc[i]), i); 1671 } else { 1672 sba_ioc_init(sba_dev->dev, &(sba_dev->ioc[i]), i); 1673 } 1674 } 1675 } 1676 1677 static void 1678 sba_common_init(struct sba_device *sba_dev) 1679 { 1680 int i; 1681 1682 /* add this one to the head of the list (order doesn't matter) 1683 ** This will be useful for debugging - especially if we get coredumps 1684 */ 1685 sba_dev->next = sba_list; 1686 sba_list = sba_dev; 1687 1688 for(i=0; i< sba_dev->num_ioc; i++) { 1689 int res_size; 1690 #ifdef DEBUG_DMB_TRAP 1691 extern void iterate_pages(unsigned long , unsigned long , 1692 void (*)(pte_t * , unsigned long), 1693 unsigned long ); 1694 void set_data_memory_break(pte_t * , unsigned long); 1695 #endif 1696 /* resource map size dictated by pdir_size */ 1697 res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */ 1698 1699 /* Second part of PIRANHA BUG */ 1700 if (piranha_bad_128k) { 1701 res_size -= (128*1024)/sizeof(u64); 1702 } 1703 1704 res_size >>= 3; /* convert bit count to byte count */ 1705 DBG_INIT("%s() res_size 0x%x\n", 1706 __func__, res_size); 1707 1708 sba_dev->ioc[i].res_size = res_size; 1709 sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size)); 1710 1711 #ifdef DEBUG_DMB_TRAP 1712 iterate_pages( sba_dev->ioc[i].res_map, res_size, 1713 set_data_memory_break, 0); 1714 #endif 1715 1716 if (NULL == sba_dev->ioc[i].res_map) 1717 { 1718 panic("%s:%s() could not allocate resource map\n", 1719 __FILE__, __func__ ); 1720 } 1721 1722 memset(sba_dev->ioc[i].res_map, 0, res_size); 1723 /* next available IOVP - circular search */ 1724 sba_dev->ioc[i].res_hint = (unsigned long *) 1725 &(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]); 1726 1727 #ifdef ASSERT_PDIR_SANITY 1728 /* Mark first bit busy - ie no IOVA 0 */ 1729 sba_dev->ioc[i].res_map[0] = 0x80; 1730 sba_dev->ioc[i].pdir_base[0] = 0xeeffc0addbba0080ULL; 1731 #endif 1732 1733 /* Third (and last) part of PIRANHA BUG */ 1734 if (piranha_bad_128k) { 1735 /* region from +1408K to +1536 is un-usable. */ 1736 1737 int idx_start = (1408*1024/sizeof(u64)) >> 3; 1738 int idx_end = (1536*1024/sizeof(u64)) >> 3; 1739 long *p_start = (long *) &(sba_dev->ioc[i].res_map[idx_start]); 1740 long *p_end = (long *) &(sba_dev->ioc[i].res_map[idx_end]); 1741 1742 /* mark that part of the io pdir busy */ 1743 while (p_start < p_end) 1744 *p_start++ = -1; 1745 1746 } 1747 1748 #ifdef DEBUG_DMB_TRAP 1749 iterate_pages( sba_dev->ioc[i].res_map, res_size, 1750 set_data_memory_break, 0); 1751 iterate_pages( sba_dev->ioc[i].pdir_base, sba_dev->ioc[i].pdir_size, 1752 set_data_memory_break, 0); 1753 #endif 1754 1755 DBG_INIT("%s() %d res_map %x %p\n", 1756 __func__, i, res_size, sba_dev->ioc[i].res_map); 1757 } 1758 1759 spin_lock_init(&sba_dev->sba_lock); 1760 ioc_needs_fdc = boot_cpu_data.pdc.capabilities & PDC_MODEL_IOPDIR_FDC; 1761 1762 #ifdef DEBUG_SBA_INIT 1763 /* 1764 * If the PDC_MODEL capabilities has Non-coherent IO-PDIR bit set 1765 * (bit #61, big endian), we have to flush and sync every time 1766 * IO-PDIR is changed in Ike/Astro. 1767 */ 1768 if (ioc_needs_fdc) { 1769 printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n"); 1770 } else { 1771 printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n"); 1772 } 1773 #endif 1774 } 1775 1776 #ifdef CONFIG_PROC_FS 1777 static int sba_proc_info(struct seq_file *m, void *p) 1778 { 1779 struct sba_device *sba_dev = sba_list; 1780 struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */ 1781 int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */ 1782 #ifdef SBA_COLLECT_STATS 1783 unsigned long avg = 0, min, max; 1784 #endif 1785 int i; 1786 1787 seq_printf(m, "%s rev %d.%d\n", 1788 sba_dev->name, 1789 (sba_dev->hw_rev & 0x7) + 1, 1790 (sba_dev->hw_rev & 0x18) >> 3); 1791 seq_printf(m, "IO PDIR size : %d bytes (%d entries)\n", 1792 (int)((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */ 1793 total_pages); 1794 1795 seq_printf(m, "Resource bitmap : %d bytes (%d pages)\n", 1796 ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */ 1797 1798 seq_printf(m, "LMMIO_BASE/MASK/ROUTE %08x %08x %08x\n", 1799 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_BASE), 1800 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_MASK), 1801 READ_REG32(sba_dev->sba_hpa + LMMIO_DIST_ROUTE)); 1802 1803 for (i=0; i<4; i++) 1804 seq_printf(m, "DIR%d_BASE/MASK/ROUTE %08x %08x %08x\n", 1805 i, 1806 READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_BASE + i*0x18), 1807 READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_MASK + i*0x18), 1808 READ_REG32(sba_dev->sba_hpa + LMMIO_DIRECT0_ROUTE + i*0x18)); 1809 1810 #ifdef SBA_COLLECT_STATS 1811 seq_printf(m, "IO PDIR entries : %ld free %ld used (%d%%)\n", 1812 total_pages - ioc->used_pages, ioc->used_pages, 1813 (int)(ioc->used_pages * 100 / total_pages)); 1814 1815 min = max = ioc->avg_search[0]; 1816 for (i = 0; i < SBA_SEARCH_SAMPLE; i++) { 1817 avg += ioc->avg_search[i]; 1818 if (ioc->avg_search[i] > max) max = ioc->avg_search[i]; 1819 if (ioc->avg_search[i] < min) min = ioc->avg_search[i]; 1820 } 1821 avg /= SBA_SEARCH_SAMPLE; 1822 seq_printf(m, " Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n", 1823 min, avg, max); 1824 1825 seq_printf(m, "pci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n", 1826 ioc->msingle_calls, ioc->msingle_pages, 1827 (int)((ioc->msingle_pages * 1000)/ioc->msingle_calls)); 1828 1829 /* KLUGE - unmap_sg calls unmap_single for each mapped page */ 1830 min = ioc->usingle_calls; 1831 max = ioc->usingle_pages - ioc->usg_pages; 1832 seq_printf(m, "pci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n", 1833 min, max, (int)((max * 1000)/min)); 1834 1835 seq_printf(m, "pci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n", 1836 ioc->msg_calls, ioc->msg_pages, 1837 (int)((ioc->msg_pages * 1000)/ioc->msg_calls)); 1838 1839 seq_printf(m, "pci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n", 1840 ioc->usg_calls, ioc->usg_pages, 1841 (int)((ioc->usg_pages * 1000)/ioc->usg_calls)); 1842 #endif 1843 1844 return 0; 1845 } 1846 1847 static int 1848 sba_proc_bitmap_info(struct seq_file *m, void *p) 1849 { 1850 struct sba_device *sba_dev = sba_list; 1851 struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */ 1852 1853 seq_hex_dump(m, " ", DUMP_PREFIX_NONE, 32, 4, ioc->res_map, 1854 ioc->res_size, false); 1855 seq_putc(m, '\n'); 1856 1857 return 0; 1858 } 1859 #endif /* CONFIG_PROC_FS */ 1860 1861 static const struct parisc_device_id sba_tbl[] __initconst = { 1862 { HPHW_IOA, HVERSION_REV_ANY_ID, ASTRO_RUNWAY_PORT, 0xb }, 1863 { HPHW_BCPORT, HVERSION_REV_ANY_ID, IKE_MERCED_PORT, 0xc }, 1864 { HPHW_BCPORT, HVERSION_REV_ANY_ID, REO_MERCED_PORT, 0xc }, 1865 { HPHW_BCPORT, HVERSION_REV_ANY_ID, REOG_MERCED_PORT, 0xc }, 1866 { HPHW_IOA, HVERSION_REV_ANY_ID, PLUTO_MCKINLEY_PORT, 0xc }, 1867 { 0, } 1868 }; 1869 1870 static int sba_driver_callback(struct parisc_device *); 1871 1872 static struct parisc_driver sba_driver __refdata = { 1873 .name = MODULE_NAME, 1874 .id_table = sba_tbl, 1875 .probe = sba_driver_callback, 1876 }; 1877 1878 /* 1879 ** Determine if sba should claim this chip (return 0) or not (return 1). 1880 ** If so, initialize the chip and tell other partners in crime they 1881 ** have work to do. 1882 */ 1883 static int __init sba_driver_callback(struct parisc_device *dev) 1884 { 1885 struct sba_device *sba_dev; 1886 u32 func_class; 1887 int i; 1888 char *version; 1889 void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE); 1890 #ifdef CONFIG_PROC_FS 1891 struct proc_dir_entry *root; 1892 #endif 1893 1894 sba_dump_ranges(sba_addr); 1895 1896 /* Read HW Rev First */ 1897 func_class = READ_REG(sba_addr + SBA_FCLASS); 1898 1899 if (IS_ASTRO(dev)) { 1900 unsigned long fclass; 1901 static char astro_rev[]="Astro ?.?"; 1902 1903 /* Astro is broken...Read HW Rev First */ 1904 fclass = READ_REG(sba_addr); 1905 1906 astro_rev[6] = '1' + (char) (fclass & 0x7); 1907 astro_rev[8] = '0' + (char) ((fclass & 0x18) >> 3); 1908 version = astro_rev; 1909 1910 } else if (IS_IKE(dev)) { 1911 static char ike_rev[] = "Ike rev ?"; 1912 ike_rev[8] = '0' + (char) (func_class & 0xff); 1913 version = ike_rev; 1914 } else if (IS_PLUTO(dev)) { 1915 static char pluto_rev[]="Pluto ?.?"; 1916 pluto_rev[6] = '0' + (char) ((func_class & 0xf0) >> 4); 1917 pluto_rev[8] = '0' + (char) (func_class & 0x0f); 1918 version = pluto_rev; 1919 } else { 1920 static char reo_rev[] = "REO rev ?"; 1921 reo_rev[8] = '0' + (char) (func_class & 0xff); 1922 version = reo_rev; 1923 } 1924 1925 if (!global_ioc_cnt) { 1926 global_ioc_cnt = count_parisc_driver(&sba_driver); 1927 1928 /* Astro and Pluto have one IOC per SBA */ 1929 if ((!IS_ASTRO(dev)) || (!IS_PLUTO(dev))) 1930 global_ioc_cnt *= 2; 1931 } 1932 1933 printk(KERN_INFO "%s found %s at 0x%llx\n", 1934 MODULE_NAME, version, (unsigned long long)dev->hpa.start); 1935 1936 sba_dev = kzalloc(sizeof(struct sba_device), GFP_KERNEL); 1937 if (!sba_dev) { 1938 printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n"); 1939 return -ENOMEM; 1940 } 1941 1942 parisc_set_drvdata(dev, sba_dev); 1943 1944 for(i=0; i<MAX_IOC; i++) 1945 spin_lock_init(&(sba_dev->ioc[i].res_lock)); 1946 1947 sba_dev->dev = dev; 1948 sba_dev->hw_rev = func_class; 1949 sba_dev->name = dev->name; 1950 sba_dev->sba_hpa = sba_addr; 1951 1952 sba_get_pat_resources(sba_dev); 1953 sba_hw_init(sba_dev); 1954 sba_common_init(sba_dev); 1955 1956 hppa_dma_ops = &sba_ops; 1957 1958 #ifdef CONFIG_PROC_FS 1959 switch (dev->id.hversion) { 1960 case PLUTO_MCKINLEY_PORT: 1961 root = proc_mckinley_root; 1962 break; 1963 case ASTRO_RUNWAY_PORT: 1964 case IKE_MERCED_PORT: 1965 default: 1966 root = proc_runway_root; 1967 break; 1968 } 1969 1970 proc_create_single("sba_iommu", 0, root, sba_proc_info); 1971 proc_create_single("sba_iommu-bitmap", 0, root, sba_proc_bitmap_info); 1972 #endif 1973 return 0; 1974 } 1975 1976 /* 1977 ** One time initialization to let the world know the SBA was found. 1978 ** This is the only routine which is NOT static. 1979 ** Must be called exactly once before pci_init(). 1980 */ 1981 void __init sba_init(void) 1982 { 1983 register_parisc_driver(&sba_driver); 1984 } 1985 1986 1987 /** 1988 * sba_get_iommu - Assign the iommu pointer for the pci bus controller. 1989 * @dev: The parisc device. 1990 * 1991 * Returns the appropriate IOMMU data for the given parisc PCI controller. 1992 * This is cached and used later for PCI DMA Mapping. 1993 */ 1994 void * sba_get_iommu(struct parisc_device *pci_hba) 1995 { 1996 struct parisc_device *sba_dev = parisc_parent(pci_hba); 1997 struct sba_device *sba = dev_get_drvdata(&sba_dev->dev); 1998 char t = sba_dev->id.hw_type; 1999 int iocnum = (pci_hba->hw_path >> 3); /* rope # */ 2000 2001 WARN_ON((t != HPHW_IOA) && (t != HPHW_BCPORT)); 2002 2003 return &(sba->ioc[iocnum]); 2004 } 2005 2006 2007 /** 2008 * sba_directed_lmmio - return first directed LMMIO range routed to rope 2009 * @pa_dev: The parisc device. 2010 * @r: resource PCI host controller wants start/end fields assigned. 2011 * 2012 * For the given parisc PCI controller, determine if any direct ranges 2013 * are routed down the corresponding rope. 2014 */ 2015 void sba_directed_lmmio(struct parisc_device *pci_hba, struct resource *r) 2016 { 2017 struct parisc_device *sba_dev = parisc_parent(pci_hba); 2018 struct sba_device *sba = dev_get_drvdata(&sba_dev->dev); 2019 char t = sba_dev->id.hw_type; 2020 int i; 2021 int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */ 2022 2023 BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT)); 2024 2025 r->start = r->end = 0; 2026 2027 /* Astro has 4 directed ranges. Not sure about Ike/Pluto/et al */ 2028 for (i=0; i<4; i++) { 2029 int base, size; 2030 void __iomem *reg = sba->sba_hpa + i*0x18; 2031 2032 base = READ_REG32(reg + LMMIO_DIRECT0_BASE); 2033 if ((base & 1) == 0) 2034 continue; /* not enabled */ 2035 2036 size = READ_REG32(reg + LMMIO_DIRECT0_ROUTE); 2037 2038 if ((size & (ROPES_PER_IOC-1)) != rope) 2039 continue; /* directed down different rope */ 2040 2041 r->start = (base & ~1UL) | PCI_F_EXTEND; 2042 size = ~ READ_REG32(reg + LMMIO_DIRECT0_MASK); 2043 r->end = r->start + size; 2044 r->flags = IORESOURCE_MEM; 2045 } 2046 } 2047 2048 2049 /** 2050 * sba_distributed_lmmio - return portion of distributed LMMIO range 2051 * @pa_dev: The parisc device. 2052 * @r: resource PCI host controller wants start/end fields assigned. 2053 * 2054 * For the given parisc PCI controller, return portion of distributed LMMIO 2055 * range. The distributed LMMIO is always present and it's just a question 2056 * of the base address and size of the range. 2057 */ 2058 void sba_distributed_lmmio(struct parisc_device *pci_hba, struct resource *r ) 2059 { 2060 struct parisc_device *sba_dev = parisc_parent(pci_hba); 2061 struct sba_device *sba = dev_get_drvdata(&sba_dev->dev); 2062 char t = sba_dev->id.hw_type; 2063 int base, size; 2064 int rope = (pci_hba->hw_path & (ROPES_PER_IOC-1)); /* rope # */ 2065 2066 BUG_ON((t!=HPHW_IOA) && (t!=HPHW_BCPORT)); 2067 2068 r->start = r->end = 0; 2069 2070 base = READ_REG32(sba->sba_hpa + LMMIO_DIST_BASE); 2071 if ((base & 1) == 0) { 2072 BUG(); /* Gah! Distr Range wasn't enabled! */ 2073 return; 2074 } 2075 2076 r->start = (base & ~1UL) | PCI_F_EXTEND; 2077 2078 size = (~READ_REG32(sba->sba_hpa + LMMIO_DIST_MASK)) / ROPES_PER_IOC; 2079 r->start += rope * (size + 1); /* adjust base for this rope */ 2080 r->end = r->start + size; 2081 r->flags = IORESOURCE_MEM; 2082 } 2083