1 /* 2 ** 3 ** PCI Lower Bus Adapter (LBA) manager 4 ** 5 ** (c) Copyright 1999,2000 Grant Grundler 6 ** (c) Copyright 1999,2000 Hewlett-Packard Company 7 ** 8 ** This program is free software; you can redistribute it and/or modify 9 ** it under the terms of the GNU General Public License as published by 10 ** the Free Software Foundation; either version 2 of the License, or 11 ** (at your option) any later version. 12 ** 13 ** 14 ** This module primarily provides access to PCI bus (config/IOport 15 ** spaces) on platforms with an SBA/LBA chipset. A/B/C/J/L/N-class 16 ** with 4 digit model numbers - eg C3000 (and A400...sigh). 17 ** 18 ** LBA driver isn't as simple as the Dino driver because: 19 ** (a) this chip has substantial bug fixes between revisions 20 ** (Only one Dino bug has a software workaround :^( ) 21 ** (b) has more options which we don't (yet) support (DMA hints, OLARD) 22 ** (c) IRQ support lives in the I/O SAPIC driver (not with PCI driver) 23 ** (d) play nicely with both PAT and "Legacy" PA-RISC firmware (PDC). 24 ** (dino only deals with "Legacy" PDC) 25 ** 26 ** LBA driver passes the I/O SAPIC HPA to the I/O SAPIC driver. 27 ** (I/O SAPIC is integratd in the LBA chip). 28 ** 29 ** FIXME: Add support to SBA and LBA drivers for DMA hint sets 30 ** FIXME: Add support for PCI card hot-plug (OLARD). 31 */ 32 33 #include <linux/delay.h> 34 #include <linux/types.h> 35 #include <linux/kernel.h> 36 #include <linux/spinlock.h> 37 #include <linux/init.h> /* for __init */ 38 #include <linux/pci.h> 39 #include <linux/ioport.h> 40 #include <linux/slab.h> 41 42 #include <asm/byteorder.h> 43 #include <asm/pdc.h> 44 #include <asm/pdcpat.h> 45 #include <asm/page.h> 46 47 #include <asm/ropes.h> 48 #include <asm/hardware.h> /* for register_parisc_driver() stuff */ 49 #include <asm/parisc-device.h> 50 #include <asm/io.h> /* read/write stuff */ 51 52 #undef DEBUG_LBA /* general stuff */ 53 #undef DEBUG_LBA_PORT /* debug I/O Port access */ 54 #undef DEBUG_LBA_CFG /* debug Config Space Access (ie PCI Bus walk) */ 55 #undef DEBUG_LBA_PAT /* debug PCI Resource Mgt code - PDC PAT only */ 56 57 #undef FBB_SUPPORT /* Fast Back-Back xfers - NOT READY YET */ 58 59 60 #ifdef DEBUG_LBA 61 #define DBG(x...) printk(x) 62 #else 63 #define DBG(x...) 64 #endif 65 66 #ifdef DEBUG_LBA_PORT 67 #define DBG_PORT(x...) printk(x) 68 #else 69 #define DBG_PORT(x...) 70 #endif 71 72 #ifdef DEBUG_LBA_CFG 73 #define DBG_CFG(x...) printk(x) 74 #else 75 #define DBG_CFG(x...) 76 #endif 77 78 #ifdef DEBUG_LBA_PAT 79 #define DBG_PAT(x...) printk(x) 80 #else 81 #define DBG_PAT(x...) 82 #endif 83 84 85 /* 86 ** Config accessor functions only pass in the 8-bit bus number and not 87 ** the 8-bit "PCI Segment" number. Each LBA will be assigned a PCI bus 88 ** number based on what firmware wrote into the scratch register. 89 ** 90 ** The "secondary" bus number is set to this before calling 91 ** pci_register_ops(). If any PPB's are present, the scan will 92 ** discover them and update the "secondary" and "subordinate" 93 ** fields in the pci_bus structure. 94 ** 95 ** Changes in the configuration *may* result in a different 96 ** bus number for each LBA depending on what firmware does. 97 */ 98 99 #define MODULE_NAME "LBA" 100 101 /* non-postable I/O port space, densely packed */ 102 #define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL) 103 static void __iomem *astro_iop_base __read_mostly; 104 105 static u32 lba_t32; 106 107 /* lba flags */ 108 #define LBA_FLAG_SKIP_PROBE 0x10 109 110 #define LBA_SKIP_PROBE(d) ((d)->flags & LBA_FLAG_SKIP_PROBE) 111 112 113 /* Looks nice and keeps the compiler happy */ 114 #define LBA_DEV(d) ((struct lba_device *) (d)) 115 116 117 /* 118 ** Only allow 8 subsidiary busses per LBA 119 ** Problem is the PCI bus numbering is globally shared. 120 */ 121 #define LBA_MAX_NUM_BUSES 8 122 123 /************************************ 124 * LBA register read and write support 125 * 126 * BE WARNED: register writes are posted. 127 * (ie follow writes which must reach HW with a read) 128 */ 129 #define READ_U8(addr) __raw_readb(addr) 130 #define READ_U16(addr) __raw_readw(addr) 131 #define READ_U32(addr) __raw_readl(addr) 132 #define WRITE_U8(value, addr) __raw_writeb(value, addr) 133 #define WRITE_U16(value, addr) __raw_writew(value, addr) 134 #define WRITE_U32(value, addr) __raw_writel(value, addr) 135 136 #define READ_REG8(addr) readb(addr) 137 #define READ_REG16(addr) readw(addr) 138 #define READ_REG32(addr) readl(addr) 139 #define READ_REG64(addr) readq(addr) 140 #define WRITE_REG8(value, addr) writeb(value, addr) 141 #define WRITE_REG16(value, addr) writew(value, addr) 142 #define WRITE_REG32(value, addr) writel(value, addr) 143 144 145 #define LBA_CFG_TOK(bus,dfn) ((u32) ((bus)<<16 | (dfn)<<8)) 146 #define LBA_CFG_BUS(tok) ((u8) ((tok)>>16)) 147 #define LBA_CFG_DEV(tok) ((u8) ((tok)>>11) & 0x1f) 148 #define LBA_CFG_FUNC(tok) ((u8) ((tok)>>8 ) & 0x7) 149 150 151 /* 152 ** Extract LBA (Rope) number from HPA 153 ** REVISIT: 16 ropes for Stretch/Ike? 154 */ 155 #define ROPES_PER_IOC 8 156 #define LBA_NUM(x) ((((unsigned long) x) >> 13) & (ROPES_PER_IOC-1)) 157 158 159 static void 160 lba_dump_res(struct resource *r, int d) 161 { 162 int i; 163 164 if (NULL == r) 165 return; 166 167 printk(KERN_DEBUG "(%p)", r->parent); 168 for (i = d; i ; --i) printk(" "); 169 printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r, 170 (long)r->start, (long)r->end, r->flags); 171 lba_dump_res(r->child, d+2); 172 lba_dump_res(r->sibling, d); 173 } 174 175 176 /* 177 ** LBA rev 2.0, 2.1, 2.2, and 3.0 bus walks require a complex 178 ** workaround for cfg cycles: 179 ** -- preserve LBA state 180 ** -- prevent any DMA from occurring 181 ** -- turn on smart mode 182 ** -- probe with config writes before doing config reads 183 ** -- check ERROR_STATUS 184 ** -- clear ERROR_STATUS 185 ** -- restore LBA state 186 ** 187 ** The workaround is only used for device discovery. 188 */ 189 190 static int lba_device_present(u8 bus, u8 dfn, struct lba_device *d) 191 { 192 u8 first_bus = d->hba.hba_bus->busn_res.start; 193 u8 last_sub_bus = d->hba.hba_bus->busn_res.end; 194 195 if ((bus < first_bus) || 196 (bus > last_sub_bus) || 197 ((bus - first_bus) >= LBA_MAX_NUM_BUSES)) { 198 return 0; 199 } 200 201 return 1; 202 } 203 204 205 206 #define LBA_CFG_SETUP(d, tok) { \ 207 /* Save contents of error config register. */ \ 208 error_config = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); \ 209 \ 210 /* Save contents of status control register. */ \ 211 status_control = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); \ 212 \ 213 /* For LBA rev 2.0, 2.1, 2.2, and 3.0, we must disable DMA \ 214 ** arbitration for full bus walks. \ 215 */ \ 216 /* Save contents of arb mask register. */ \ 217 arb_mask = READ_REG32(d->hba.base_addr + LBA_ARB_MASK); \ 218 \ 219 /* \ 220 * Turn off all device arbitration bits (i.e. everything \ 221 * except arbitration enable bit). \ 222 */ \ 223 WRITE_REG32(0x1, d->hba.base_addr + LBA_ARB_MASK); \ 224 \ 225 /* \ 226 * Set the smart mode bit so that master aborts don't cause \ 227 * LBA to go into PCI fatal mode (required). \ 228 */ \ 229 WRITE_REG32(error_config | LBA_SMART_MODE, d->hba.base_addr + LBA_ERROR_CONFIG); \ 230 } 231 232 233 #define LBA_CFG_PROBE(d, tok) { \ 234 /* \ 235 * Setup Vendor ID write and read back the address register \ 236 * to make sure that LBA is the bus master. \ 237 */ \ 238 WRITE_REG32(tok | PCI_VENDOR_ID, (d)->hba.base_addr + LBA_PCI_CFG_ADDR);\ 239 /* \ 240 * Read address register to ensure that LBA is the bus master, \ 241 * which implies that DMA traffic has stopped when DMA arb is off. \ 242 */ \ 243 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 244 /* \ 245 * Generate a cfg write cycle (will have no affect on \ 246 * Vendor ID register since read-only). \ 247 */ \ 248 WRITE_REG32(~0, (d)->hba.base_addr + LBA_PCI_CFG_DATA); \ 249 /* \ 250 * Make sure write has completed before proceeding further, \ 251 * i.e. before setting clear enable. \ 252 */ \ 253 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 254 } 255 256 257 /* 258 * HPREVISIT: 259 * -- Can't tell if config cycle got the error. 260 * 261 * OV bit is broken until rev 4.0, so can't use OV bit and 262 * LBA_ERROR_LOG_ADDR to tell if error belongs to config cycle. 263 * 264 * As of rev 4.0, no longer need the error check. 265 * 266 * -- Even if we could tell, we still want to return -1 267 * for **ANY** error (not just master abort). 268 * 269 * -- Only clear non-fatal errors (we don't want to bring 270 * LBA out of pci-fatal mode). 271 * 272 * Actually, there is still a race in which 273 * we could be clearing a fatal error. We will 274 * live with this during our initial bus walk 275 * until rev 4.0 (no driver activity during 276 * initial bus walk). The initial bus walk 277 * has race conditions concerning the use of 278 * smart mode as well. 279 */ 280 281 #define LBA_MASTER_ABORT_ERROR 0xc 282 #define LBA_FATAL_ERROR 0x10 283 284 #define LBA_CFG_MASTER_ABORT_CHECK(d, base, tok, error) { \ 285 u32 error_status = 0; \ 286 /* \ 287 * Set clear enable (CE) bit. Unset by HW when new \ 288 * errors are logged -- LBA HW ERS section 14.3.3). \ 289 */ \ 290 WRITE_REG32(status_control | CLEAR_ERRLOG_ENABLE, base + LBA_STAT_CTL); \ 291 error_status = READ_REG32(base + LBA_ERROR_STATUS); \ 292 if ((error_status & 0x1f) != 0) { \ 293 /* \ 294 * Fail the config read request. \ 295 */ \ 296 error = 1; \ 297 if ((error_status & LBA_FATAL_ERROR) == 0) { \ 298 /* \ 299 * Clear error status (if fatal bit not set) by setting \ 300 * clear error log bit (CL). \ 301 */ \ 302 WRITE_REG32(status_control | CLEAR_ERRLOG, base + LBA_STAT_CTL); \ 303 } \ 304 } \ 305 } 306 307 #define LBA_CFG_TR4_ADDR_SETUP(d, addr) \ 308 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); 309 310 #define LBA_CFG_ADDR_SETUP(d, addr) { \ 311 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 312 /* \ 313 * Read address register to ensure that LBA is the bus master, \ 314 * which implies that DMA traffic has stopped when DMA arb is off. \ 315 */ \ 316 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 317 } 318 319 320 #define LBA_CFG_RESTORE(d, base) { \ 321 /* \ 322 * Restore status control register (turn off clear enable). \ 323 */ \ 324 WRITE_REG32(status_control, base + LBA_STAT_CTL); \ 325 /* \ 326 * Restore error config register (turn off smart mode). \ 327 */ \ 328 WRITE_REG32(error_config, base + LBA_ERROR_CONFIG); \ 329 /* \ 330 * Restore arb mask register (reenables DMA arbitration). \ 331 */ \ 332 WRITE_REG32(arb_mask, base + LBA_ARB_MASK); \ 333 } 334 335 336 337 static unsigned int 338 lba_rd_cfg(struct lba_device *d, u32 tok, u8 reg, u32 size) 339 { 340 u32 data = ~0U; 341 int error = 0; 342 u32 arb_mask = 0; /* used by LBA_CFG_SETUP/RESTORE */ 343 u32 error_config = 0; /* used by LBA_CFG_SETUP/RESTORE */ 344 u32 status_control = 0; /* used by LBA_CFG_SETUP/RESTORE */ 345 346 LBA_CFG_SETUP(d, tok); 347 LBA_CFG_PROBE(d, tok); 348 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error); 349 if (!error) { 350 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 351 352 LBA_CFG_ADDR_SETUP(d, tok | reg); 353 switch (size) { 354 case 1: data = (u32) READ_REG8(data_reg + (reg & 3)); break; 355 case 2: data = (u32) READ_REG16(data_reg+ (reg & 2)); break; 356 case 4: data = READ_REG32(data_reg); break; 357 } 358 } 359 LBA_CFG_RESTORE(d, d->hba.base_addr); 360 return(data); 361 } 362 363 364 static int elroy_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data) 365 { 366 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 367 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start; 368 u32 tok = LBA_CFG_TOK(local_bus, devfn); 369 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 370 371 if ((pos > 255) || (devfn > 255)) 372 return -EINVAL; 373 374 /* FIXME: B2K/C3600 workaround is always use old method... */ 375 /* if (!LBA_SKIP_PROBE(d)) */ { 376 /* original - Generate config cycle on broken elroy 377 with risk we will miss PCI bus errors. */ 378 *data = lba_rd_cfg(d, tok, pos, size); 379 DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __func__, tok, pos, *data); 380 return 0; 381 } 382 383 if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->busn_res.start, devfn, d)) { 384 DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos); 385 /* either don't want to look or know device isn't present. */ 386 *data = ~0U; 387 return(0); 388 } 389 390 /* Basic Algorithm 391 ** Should only get here on fully working LBA rev. 392 ** This is how simple the code should have been. 393 */ 394 LBA_CFG_ADDR_SETUP(d, tok | pos); 395 switch(size) { 396 case 1: *data = READ_REG8 (data_reg + (pos & 3)); break; 397 case 2: *data = READ_REG16(data_reg + (pos & 2)); break; 398 case 4: *data = READ_REG32(data_reg); break; 399 } 400 DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __func__, tok, pos, *data); 401 return 0; 402 } 403 404 405 static void 406 lba_wr_cfg(struct lba_device *d, u32 tok, u8 reg, u32 data, u32 size) 407 { 408 int error = 0; 409 u32 arb_mask = 0; 410 u32 error_config = 0; 411 u32 status_control = 0; 412 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 413 414 LBA_CFG_SETUP(d, tok); 415 LBA_CFG_ADDR_SETUP(d, tok | reg); 416 switch (size) { 417 case 1: WRITE_REG8 (data, data_reg + (reg & 3)); break; 418 case 2: WRITE_REG16(data, data_reg + (reg & 2)); break; 419 case 4: WRITE_REG32(data, data_reg); break; 420 } 421 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error); 422 LBA_CFG_RESTORE(d, d->hba.base_addr); 423 } 424 425 426 /* 427 * LBA 4.0 config write code implements non-postable semantics 428 * by doing a read of CONFIG ADDR after the write. 429 */ 430 431 static int elroy_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data) 432 { 433 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 434 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start; 435 u32 tok = LBA_CFG_TOK(local_bus,devfn); 436 437 if ((pos > 255) || (devfn > 255)) 438 return -EINVAL; 439 440 if (!LBA_SKIP_PROBE(d)) { 441 /* Original Workaround */ 442 lba_wr_cfg(d, tok, pos, (u32) data, size); 443 DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __func__, tok, pos,data); 444 return 0; 445 } 446 447 if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->busn_res.start, devfn, d))) { 448 DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data); 449 return 1; /* New Workaround */ 450 } 451 452 DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __func__, tok, pos, data); 453 454 /* Basic Algorithm */ 455 LBA_CFG_ADDR_SETUP(d, tok | pos); 456 switch(size) { 457 case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3)); 458 break; 459 case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2)); 460 break; 461 case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA); 462 break; 463 } 464 /* flush posted write */ 465 lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR); 466 return 0; 467 } 468 469 470 static struct pci_ops elroy_cfg_ops = { 471 .read = elroy_cfg_read, 472 .write = elroy_cfg_write, 473 }; 474 475 /* 476 * The mercury_cfg_ops are slightly misnamed; they're also used for Elroy 477 * TR4.0 as no additional bugs were found in this areea between Elroy and 478 * Mercury 479 */ 480 481 static int mercury_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data) 482 { 483 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 484 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start; 485 u32 tok = LBA_CFG_TOK(local_bus, devfn); 486 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 487 488 if ((pos > 255) || (devfn > 255)) 489 return -EINVAL; 490 491 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); 492 switch(size) { 493 case 1: 494 *data = READ_REG8(data_reg + (pos & 3)); 495 break; 496 case 2: 497 *data = READ_REG16(data_reg + (pos & 2)); 498 break; 499 case 4: 500 *data = READ_REG32(data_reg); break; 501 break; 502 } 503 504 DBG_CFG("mercury_cfg_read(%x+%2x) -> 0x%x\n", tok, pos, *data); 505 return 0; 506 } 507 508 /* 509 * LBA 4.0 config write code implements non-postable semantics 510 * by doing a read of CONFIG ADDR after the write. 511 */ 512 513 static int mercury_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data) 514 { 515 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 516 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 517 u32 local_bus = (bus->parent == NULL) ? 0 : bus->busn_res.start; 518 u32 tok = LBA_CFG_TOK(local_bus,devfn); 519 520 if ((pos > 255) || (devfn > 255)) 521 return -EINVAL; 522 523 DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __func__, tok, pos, data); 524 525 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); 526 switch(size) { 527 case 1: 528 WRITE_REG8 (data, data_reg + (pos & 3)); 529 break; 530 case 2: 531 WRITE_REG16(data, data_reg + (pos & 2)); 532 break; 533 case 4: 534 WRITE_REG32(data, data_reg); 535 break; 536 } 537 538 /* flush posted write */ 539 lba_t32 = READ_U32(d->hba.base_addr + LBA_PCI_CFG_ADDR); 540 return 0; 541 } 542 543 static struct pci_ops mercury_cfg_ops = { 544 .read = mercury_cfg_read, 545 .write = mercury_cfg_write, 546 }; 547 548 549 static void 550 lba_bios_init(void) 551 { 552 DBG(MODULE_NAME ": lba_bios_init\n"); 553 } 554 555 556 #ifdef CONFIG_64BIT 557 558 /* 559 * truncate_pat_collision: Deal with overlaps or outright collisions 560 * between PAT PDC reported ranges. 561 * 562 * Broken PA8800 firmware will report lmmio range that 563 * overlaps with CPU HPA. Just truncate the lmmio range. 564 * 565 * BEWARE: conflicts with this lmmio range may be an 566 * elmmio range which is pointing down another rope. 567 * 568 * FIXME: only deals with one collision per range...theoretically we 569 * could have several. Supporting more than one collision will get messy. 570 */ 571 static unsigned long 572 truncate_pat_collision(struct resource *root, struct resource *new) 573 { 574 unsigned long start = new->start; 575 unsigned long end = new->end; 576 struct resource *tmp = root->child; 577 578 if (end <= start || start < root->start || !tmp) 579 return 0; 580 581 /* find first overlap */ 582 while (tmp && tmp->end < start) 583 tmp = tmp->sibling; 584 585 /* no entries overlap */ 586 if (!tmp) return 0; 587 588 /* found one that starts behind the new one 589 ** Don't need to do anything. 590 */ 591 if (tmp->start >= end) return 0; 592 593 if (tmp->start <= start) { 594 /* "front" of new one overlaps */ 595 new->start = tmp->end + 1; 596 597 if (tmp->end >= end) { 598 /* AACCKK! totally overlaps! drop this range. */ 599 return 1; 600 } 601 } 602 603 if (tmp->end < end ) { 604 /* "end" of new one overlaps */ 605 new->end = tmp->start - 1; 606 } 607 608 printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] " 609 "to [%lx,%lx]\n", 610 start, end, 611 (long)new->start, (long)new->end ); 612 613 return 0; /* truncation successful */ 614 } 615 616 /* 617 * extend_lmmio_len: extend lmmio range to maximum length 618 * 619 * This is needed at least on C8000 systems to get the ATI FireGL card 620 * working. On other systems we will currently not extend the lmmio space. 621 */ 622 static unsigned long 623 extend_lmmio_len(unsigned long start, unsigned long end, unsigned long lba_len) 624 { 625 struct resource *tmp; 626 627 pr_debug("LMMIO mismatch: PAT length = 0x%lx, MASK register = 0x%lx\n", 628 end - start, lba_len); 629 630 lba_len = min(lba_len+1, 256UL*1024*1024); /* limit to 256 MB */ 631 632 pr_debug("LBA: lmmio_space [0x%lx-0x%lx] - original\n", start, end); 633 634 if (boot_cpu_data.cpu_type < mako) { 635 pr_info("LBA: Not a C8000 system - not extending LMMIO range.\n"); 636 return end; 637 } 638 639 end += lba_len; 640 if (end < start) /* fix overflow */ 641 end = -1ULL; 642 643 pr_debug("LBA: lmmio_space [0x%lx-0x%lx] - current\n", start, end); 644 645 /* first overlap */ 646 for (tmp = iomem_resource.child; tmp; tmp = tmp->sibling) { 647 pr_debug("LBA: testing %pR\n", tmp); 648 if (tmp->start == start) 649 continue; /* ignore ourself */ 650 if (tmp->end < start) 651 continue; 652 if (tmp->start > end) 653 continue; 654 if (end >= tmp->start) 655 end = tmp->start - 1; 656 } 657 658 pr_info("LBA: lmmio_space [0x%lx-0x%lx] - new\n", start, end); 659 660 /* return new end */ 661 return end; 662 } 663 664 #else 665 #define truncate_pat_collision(r,n) (0) 666 #endif 667 668 /* 669 ** The algorithm is generic code. 670 ** But it needs to access local data structures to get the IRQ base. 671 ** Could make this a "pci_fixup_irq(bus, region)" but not sure 672 ** it's worth it. 673 ** 674 ** Called by do_pci_scan_bus() immediately after each PCI bus is walked. 675 ** Resources aren't allocated until recursive buswalk below HBA is completed. 676 */ 677 static void 678 lba_fixup_bus(struct pci_bus *bus) 679 { 680 struct pci_dev *dev; 681 #ifdef FBB_SUPPORT 682 u16 status; 683 #endif 684 struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge)); 685 686 DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n", 687 bus, (int)bus->busn_res.start, bus->bridge->platform_data); 688 689 /* 690 ** Properly Setup MMIO resources for this bus. 691 ** pci_alloc_primary_bus() mangles this. 692 */ 693 if (bus->parent) { 694 int i; 695 /* PCI-PCI Bridge */ 696 pci_read_bridge_bases(bus); 697 for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { 698 pci_claim_resource(bus->self, i); 699 } 700 } else { 701 /* Host-PCI Bridge */ 702 int err; 703 704 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n", 705 ldev->hba.io_space.name, 706 ldev->hba.io_space.start, ldev->hba.io_space.end, 707 ldev->hba.io_space.flags); 708 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n", 709 ldev->hba.lmmio_space.name, 710 ldev->hba.lmmio_space.start, ldev->hba.lmmio_space.end, 711 ldev->hba.lmmio_space.flags); 712 713 err = request_resource(&ioport_resource, &(ldev->hba.io_space)); 714 if (err < 0) { 715 lba_dump_res(&ioport_resource, 2); 716 BUG(); 717 } 718 719 if (ldev->hba.elmmio_space.flags) { 720 err = request_resource(&iomem_resource, 721 &(ldev->hba.elmmio_space)); 722 if (err < 0) { 723 724 printk("FAILED: lba_fixup_bus() request for " 725 "elmmio_space [%lx/%lx]\n", 726 (long)ldev->hba.elmmio_space.start, 727 (long)ldev->hba.elmmio_space.end); 728 729 /* lba_dump_res(&iomem_resource, 2); */ 730 /* BUG(); */ 731 } 732 } 733 734 if (ldev->hba.lmmio_space.flags) { 735 err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space)); 736 if (err < 0) { 737 printk(KERN_ERR "FAILED: lba_fixup_bus() request for " 738 "lmmio_space [%lx/%lx]\n", 739 (long)ldev->hba.lmmio_space.start, 740 (long)ldev->hba.lmmio_space.end); 741 } 742 } 743 744 #ifdef CONFIG_64BIT 745 /* GMMIO is distributed range. Every LBA/Rope gets part it. */ 746 if (ldev->hba.gmmio_space.flags) { 747 err = request_resource(&iomem_resource, &(ldev->hba.gmmio_space)); 748 if (err < 0) { 749 printk("FAILED: lba_fixup_bus() request for " 750 "gmmio_space [%lx/%lx]\n", 751 (long)ldev->hba.gmmio_space.start, 752 (long)ldev->hba.gmmio_space.end); 753 lba_dump_res(&iomem_resource, 2); 754 BUG(); 755 } 756 } 757 #endif 758 759 } 760 761 list_for_each_entry(dev, &bus->devices, bus_list) { 762 int i; 763 764 DBG("lba_fixup_bus() %s\n", pci_name(dev)); 765 766 /* Virtualize Device/Bridge Resources. */ 767 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { 768 struct resource *res = &dev->resource[i]; 769 770 /* If resource not allocated - skip it */ 771 if (!res->start) 772 continue; 773 774 /* 775 ** FIXME: this will result in whinging for devices 776 ** that share expansion ROMs (think quad tulip), but 777 ** isn't harmful. 778 */ 779 pci_claim_resource(dev, i); 780 } 781 782 #ifdef FBB_SUPPORT 783 /* 784 ** If one device does not support FBB transfers, 785 ** No one on the bus can be allowed to use them. 786 */ 787 (void) pci_read_config_word(dev, PCI_STATUS, &status); 788 bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK); 789 #endif 790 791 /* 792 ** P2PB's have no IRQs. ignore them. 793 */ 794 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) 795 continue; 796 797 /* Adjust INTERRUPT_LINE for this dev */ 798 iosapic_fixup_irq(ldev->iosapic_obj, dev); 799 } 800 801 #ifdef FBB_SUPPORT 802 /* FIXME/REVISIT - finish figuring out to set FBB on both 803 ** pci_setup_bridge() clobbers PCI_BRIDGE_CONTROL. 804 ** Can't fixup here anyway....garr... 805 */ 806 if (fbb_enable) { 807 if (bus->parent) { 808 u8 control; 809 /* enable on PPB */ 810 (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control); 811 (void) pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, control | PCI_STATUS_FAST_BACK); 812 813 } else { 814 /* enable on LBA */ 815 } 816 fbb_enable = PCI_COMMAND_FAST_BACK; 817 } 818 819 /* Lastly enable FBB/PERR/SERR on all devices too */ 820 list_for_each_entry(dev, &bus->devices, bus_list) { 821 (void) pci_read_config_word(dev, PCI_COMMAND, &status); 822 status |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR | fbb_enable; 823 (void) pci_write_config_word(dev, PCI_COMMAND, status); 824 } 825 #endif 826 } 827 828 829 static struct pci_bios_ops lba_bios_ops = { 830 .init = lba_bios_init, 831 .fixup_bus = lba_fixup_bus, 832 }; 833 834 835 836 837 /******************************************************* 838 ** 839 ** LBA Sprockets "I/O Port" Space Accessor Functions 840 ** 841 ** This set of accessor functions is intended for use with 842 ** "legacy firmware" (ie Sprockets on Allegro/Forte boxes). 843 ** 844 ** Many PCI devices don't require use of I/O port space (eg Tulip, 845 ** NCR720) since they export the same registers to both MMIO and 846 ** I/O port space. In general I/O port space is slower than 847 ** MMIO since drivers are designed so PIO writes can be posted. 848 ** 849 ********************************************************/ 850 851 #define LBA_PORT_IN(size, mask) \ 852 static u##size lba_astro_in##size (struct pci_hba_data *d, u16 addr) \ 853 { \ 854 u##size t; \ 855 t = READ_REG##size(astro_iop_base + addr); \ 856 DBG_PORT(" 0x%x\n", t); \ 857 return (t); \ 858 } 859 860 LBA_PORT_IN( 8, 3) 861 LBA_PORT_IN(16, 2) 862 LBA_PORT_IN(32, 0) 863 864 865 866 /* 867 ** BUG X4107: Ordering broken - DMA RD return can bypass PIO WR 868 ** 869 ** Fixed in Elroy 2.2. The READ_U32(..., LBA_FUNC_ID) below is 870 ** guarantee non-postable completion semantics - not avoid X4107. 871 ** The READ_U32 only guarantees the write data gets to elroy but 872 ** out to the PCI bus. We can't read stuff from I/O port space 873 ** since we don't know what has side-effects. Attempting to read 874 ** from configuration space would be suicidal given the number of 875 ** bugs in that elroy functionality. 876 ** 877 ** Description: 878 ** DMA read results can improperly pass PIO writes (X4107). The 879 ** result of this bug is that if a processor modifies a location in 880 ** memory after having issued PIO writes, the PIO writes are not 881 ** guaranteed to be completed before a PCI device is allowed to see 882 ** the modified data in a DMA read. 883 ** 884 ** Note that IKE bug X3719 in TR1 IKEs will result in the same 885 ** symptom. 886 ** 887 ** Workaround: 888 ** The workaround for this bug is to always follow a PIO write with 889 ** a PIO read to the same bus before starting DMA on that PCI bus. 890 ** 891 */ 892 #define LBA_PORT_OUT(size, mask) \ 893 static void lba_astro_out##size (struct pci_hba_data *d, u16 addr, u##size val) \ 894 { \ 895 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, d, addr, val); \ 896 WRITE_REG##size(val, astro_iop_base + addr); \ 897 if (LBA_DEV(d)->hw_rev < 3) \ 898 lba_t32 = READ_U32(d->base_addr + LBA_FUNC_ID); \ 899 } 900 901 LBA_PORT_OUT( 8, 3) 902 LBA_PORT_OUT(16, 2) 903 LBA_PORT_OUT(32, 0) 904 905 906 static struct pci_port_ops lba_astro_port_ops = { 907 .inb = lba_astro_in8, 908 .inw = lba_astro_in16, 909 .inl = lba_astro_in32, 910 .outb = lba_astro_out8, 911 .outw = lba_astro_out16, 912 .outl = lba_astro_out32 913 }; 914 915 916 #ifdef CONFIG_64BIT 917 #define PIOP_TO_GMMIO(lba, addr) \ 918 ((lba)->iop_base + (((addr)&0xFFFC)<<10) + ((addr)&3)) 919 920 /******************************************************* 921 ** 922 ** LBA PAT "I/O Port" Space Accessor Functions 923 ** 924 ** This set of accessor functions is intended for use with 925 ** "PAT PDC" firmware (ie Prelude/Rhapsody/Piranha boxes). 926 ** 927 ** This uses the PIOP space located in the first 64MB of GMMIO. 928 ** Each rope gets a full 64*KB* (ie 4 bytes per page) this way. 929 ** bits 1:0 stay the same. bits 15:2 become 25:12. 930 ** Then add the base and we can generate an I/O Port cycle. 931 ********************************************************/ 932 #undef LBA_PORT_IN 933 #define LBA_PORT_IN(size, mask) \ 934 static u##size lba_pat_in##size (struct pci_hba_data *l, u16 addr) \ 935 { \ 936 u##size t; \ 937 DBG_PORT("%s(0x%p, 0x%x) ->", __func__, l, addr); \ 938 t = READ_REG##size(PIOP_TO_GMMIO(LBA_DEV(l), addr)); \ 939 DBG_PORT(" 0x%x\n", t); \ 940 return (t); \ 941 } 942 943 LBA_PORT_IN( 8, 3) 944 LBA_PORT_IN(16, 2) 945 LBA_PORT_IN(32, 0) 946 947 948 #undef LBA_PORT_OUT 949 #define LBA_PORT_OUT(size, mask) \ 950 static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \ 951 { \ 952 void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \ 953 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, l, addr, val); \ 954 WRITE_REG##size(val, where); \ 955 /* flush the I/O down to the elroy at least */ \ 956 lba_t32 = READ_U32(l->base_addr + LBA_FUNC_ID); \ 957 } 958 959 LBA_PORT_OUT( 8, 3) 960 LBA_PORT_OUT(16, 2) 961 LBA_PORT_OUT(32, 0) 962 963 964 static struct pci_port_ops lba_pat_port_ops = { 965 .inb = lba_pat_in8, 966 .inw = lba_pat_in16, 967 .inl = lba_pat_in32, 968 .outb = lba_pat_out8, 969 .outw = lba_pat_out16, 970 .outl = lba_pat_out32 971 }; 972 973 974 975 /* 976 ** make range information from PDC available to PCI subsystem. 977 ** We make the PDC call here in order to get the PCI bus range 978 ** numbers. The rest will get forwarded in pcibios_fixup_bus(). 979 ** We don't have a struct pci_bus assigned to us yet. 980 */ 981 static void 982 lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) 983 { 984 unsigned long bytecnt; 985 long io_count; 986 long status; /* PDC return status */ 987 long pa_count; 988 pdc_pat_cell_mod_maddr_block_t *pa_pdc_cell; /* PA_VIEW */ 989 pdc_pat_cell_mod_maddr_block_t *io_pdc_cell; /* IO_VIEW */ 990 int i; 991 992 pa_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); 993 if (!pa_pdc_cell) 994 return; 995 996 io_pdc_cell = kzalloc(sizeof(pdc_pat_cell_mod_maddr_block_t), GFP_KERNEL); 997 if (!io_pdc_cell) { 998 kfree(pa_pdc_cell); 999 return; 1000 } 1001 1002 /* return cell module (IO view) */ 1003 status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, 1004 PA_VIEW, pa_pdc_cell); 1005 pa_count = pa_pdc_cell->mod[1]; 1006 1007 status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, 1008 IO_VIEW, io_pdc_cell); 1009 io_count = io_pdc_cell->mod[1]; 1010 1011 /* We've already done this once for device discovery...*/ 1012 if (status != PDC_OK) { 1013 panic("pdc_pat_cell_module() call failed for LBA!\n"); 1014 } 1015 1016 if (PAT_GET_ENTITY(pa_pdc_cell->mod_info) != PAT_ENTITY_LBA) { 1017 panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n"); 1018 } 1019 1020 /* 1021 ** Inspect the resources PAT tells us about 1022 */ 1023 for (i = 0; i < pa_count; i++) { 1024 struct { 1025 unsigned long type; 1026 unsigned long start; 1027 unsigned long end; /* aka finish */ 1028 } *p, *io; 1029 struct resource *r; 1030 1031 p = (void *) &(pa_pdc_cell->mod[2+i*3]); 1032 io = (void *) &(io_pdc_cell->mod[2+i*3]); 1033 1034 /* Convert the PAT range data to PCI "struct resource" */ 1035 switch(p->type & 0xff) { 1036 case PAT_PBNUM: 1037 lba_dev->hba.bus_num.start = p->start; 1038 lba_dev->hba.bus_num.end = p->end; 1039 lba_dev->hba.bus_num.flags = IORESOURCE_BUS; 1040 break; 1041 1042 case PAT_LMMIO: 1043 /* used to fix up pre-initialized MEM BARs */ 1044 if (!lba_dev->hba.lmmio_space.flags) { 1045 unsigned long lba_len; 1046 1047 lba_len = ~READ_REG32(lba_dev->hba.base_addr 1048 + LBA_LMMIO_MASK); 1049 if ((p->end - p->start) != lba_len) 1050 p->end = extend_lmmio_len(p->start, 1051 p->end, lba_len); 1052 1053 sprintf(lba_dev->hba.lmmio_name, 1054 "PCI%02x LMMIO", 1055 (int)lba_dev->hba.bus_num.start); 1056 lba_dev->hba.lmmio_space_offset = p->start - 1057 io->start; 1058 r = &lba_dev->hba.lmmio_space; 1059 r->name = lba_dev->hba.lmmio_name; 1060 } else if (!lba_dev->hba.elmmio_space.flags) { 1061 sprintf(lba_dev->hba.elmmio_name, 1062 "PCI%02x ELMMIO", 1063 (int)lba_dev->hba.bus_num.start); 1064 r = &lba_dev->hba.elmmio_space; 1065 r->name = lba_dev->hba.elmmio_name; 1066 } else { 1067 printk(KERN_WARNING MODULE_NAME 1068 " only supports 2 LMMIO resources!\n"); 1069 break; 1070 } 1071 1072 r->start = p->start; 1073 r->end = p->end; 1074 r->flags = IORESOURCE_MEM; 1075 r->parent = r->sibling = r->child = NULL; 1076 break; 1077 1078 case PAT_GMMIO: 1079 /* MMIO space > 4GB phys addr; for 64-bit BAR */ 1080 sprintf(lba_dev->hba.gmmio_name, "PCI%02x GMMIO", 1081 (int)lba_dev->hba.bus_num.start); 1082 r = &lba_dev->hba.gmmio_space; 1083 r->name = lba_dev->hba.gmmio_name; 1084 r->start = p->start; 1085 r->end = p->end; 1086 r->flags = IORESOURCE_MEM; 1087 r->parent = r->sibling = r->child = NULL; 1088 break; 1089 1090 case PAT_NPIOP: 1091 printk(KERN_WARNING MODULE_NAME 1092 " range[%d] : ignoring NPIOP (0x%lx)\n", 1093 i, p->start); 1094 break; 1095 1096 case PAT_PIOP: 1097 /* 1098 ** Postable I/O port space is per PCI host adapter. 1099 ** base of 64MB PIOP region 1100 */ 1101 lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024); 1102 1103 sprintf(lba_dev->hba.io_name, "PCI%02x Ports", 1104 (int)lba_dev->hba.bus_num.start); 1105 r = &lba_dev->hba.io_space; 1106 r->name = lba_dev->hba.io_name; 1107 r->start = HBA_PORT_BASE(lba_dev->hba.hba_num); 1108 r->end = r->start + HBA_PORT_SPACE_SIZE - 1; 1109 r->flags = IORESOURCE_IO; 1110 r->parent = r->sibling = r->child = NULL; 1111 break; 1112 1113 default: 1114 printk(KERN_WARNING MODULE_NAME 1115 " range[%d] : unknown pat range type (0x%lx)\n", 1116 i, p->type & 0xff); 1117 break; 1118 } 1119 } 1120 1121 kfree(pa_pdc_cell); 1122 kfree(io_pdc_cell); 1123 } 1124 #else 1125 /* keep compiler from complaining about missing declarations */ 1126 #define lba_pat_port_ops lba_astro_port_ops 1127 #define lba_pat_resources(pa_dev, lba_dev) 1128 #endif /* CONFIG_64BIT */ 1129 1130 1131 extern void sba_distributed_lmmio(struct parisc_device *, struct resource *); 1132 extern void sba_directed_lmmio(struct parisc_device *, struct resource *); 1133 1134 1135 static void 1136 lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) 1137 { 1138 struct resource *r; 1139 int lba_num; 1140 1141 lba_dev->hba.lmmio_space_offset = PCI_F_EXTEND; 1142 1143 /* 1144 ** With "legacy" firmware, the lowest byte of FW_SCRATCH 1145 ** represents bus->secondary and the second byte represents 1146 ** bus->subsidiary (i.e. highest PPB programmed by firmware). 1147 ** PCI bus walk *should* end up with the same result. 1148 ** FIXME: But we don't have sanity checks in PCI or LBA. 1149 */ 1150 lba_num = READ_REG32(lba_dev->hba.base_addr + LBA_FW_SCRATCH); 1151 r = &(lba_dev->hba.bus_num); 1152 r->name = "LBA PCI Busses"; 1153 r->start = lba_num & 0xff; 1154 r->end = (lba_num>>8) & 0xff; 1155 r->flags = IORESOURCE_BUS; 1156 1157 /* Set up local PCI Bus resources - we don't need them for 1158 ** Legacy boxes but it's nice to see in /proc/iomem. 1159 */ 1160 r = &(lba_dev->hba.lmmio_space); 1161 sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", 1162 (int)lba_dev->hba.bus_num.start); 1163 r->name = lba_dev->hba.lmmio_name; 1164 1165 #if 1 1166 /* We want the CPU -> IO routing of addresses. 1167 * The SBA BASE/MASK registers control CPU -> IO routing. 1168 * Ask SBA what is routed to this rope/LBA. 1169 */ 1170 sba_distributed_lmmio(pa_dev, r); 1171 #else 1172 /* 1173 * The LBA BASE/MASK registers control IO -> System routing. 1174 * 1175 * The following code works but doesn't get us what we want. 1176 * Well, only because firmware (v5.0) on C3000 doesn't program 1177 * the LBA BASE/MASE registers to be the exact inverse of 1178 * the corresponding SBA registers. Other Astro/Pluto 1179 * based platform firmware may do it right. 1180 * 1181 * Should someone want to mess with MSI, they may need to 1182 * reprogram LBA BASE/MASK registers. Thus preserve the code 1183 * below until MSI is known to work on C3000/A500/N4000/RP3440. 1184 * 1185 * Using the code below, /proc/iomem shows: 1186 * ... 1187 * f0000000-f0ffffff : PCI00 LMMIO 1188 * f05d0000-f05d0000 : lcd_data 1189 * f05d0008-f05d0008 : lcd_cmd 1190 * f1000000-f1ffffff : PCI01 LMMIO 1191 * f4000000-f4ffffff : PCI02 LMMIO 1192 * f4000000-f4001fff : sym53c8xx 1193 * f4002000-f4003fff : sym53c8xx 1194 * f4004000-f40043ff : sym53c8xx 1195 * f4005000-f40053ff : sym53c8xx 1196 * f4007000-f4007fff : ohci_hcd 1197 * f4008000-f40083ff : tulip 1198 * f6000000-f6ffffff : PCI03 LMMIO 1199 * f8000000-fbffffff : PCI00 ELMMIO 1200 * fa100000-fa4fffff : stifb mmio 1201 * fb000000-fb1fffff : stifb fb 1202 * 1203 * But everything listed under PCI02 actually lives under PCI00. 1204 * This is clearly wrong. 1205 * 1206 * Asking SBA how things are routed tells the correct story: 1207 * LMMIO_BASE/MASK/ROUTE f4000001 fc000000 00000000 1208 * DIR0_BASE/MASK/ROUTE fa000001 fe000000 00000006 1209 * DIR1_BASE/MASK/ROUTE f9000001 ff000000 00000004 1210 * DIR2_BASE/MASK/ROUTE f0000000 fc000000 00000000 1211 * DIR3_BASE/MASK/ROUTE f0000000 fc000000 00000000 1212 * 1213 * Which looks like this in /proc/iomem: 1214 * f4000000-f47fffff : PCI00 LMMIO 1215 * f4000000-f4001fff : sym53c8xx 1216 * ...[deteled core devices - same as above]... 1217 * f4008000-f40083ff : tulip 1218 * f4800000-f4ffffff : PCI01 LMMIO 1219 * f6000000-f67fffff : PCI02 LMMIO 1220 * f7000000-f77fffff : PCI03 LMMIO 1221 * f9000000-f9ffffff : PCI02 ELMMIO 1222 * fa000000-fbffffff : PCI03 ELMMIO 1223 * fa100000-fa4fffff : stifb mmio 1224 * fb000000-fb1fffff : stifb fb 1225 * 1226 * ie all Built-in core are under now correctly under PCI00. 1227 * The "PCI02 ELMMIO" directed range is for: 1228 * +-[02]---03.0 3Dfx Interactive, Inc. Voodoo 2 1229 * 1230 * All is well now. 1231 */ 1232 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_BASE); 1233 if (r->start & 1) { 1234 unsigned long rsize; 1235 1236 r->flags = IORESOURCE_MEM; 1237 /* mmio_mask also clears Enable bit */ 1238 r->start &= mmio_mask; 1239 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start); 1240 rsize = ~ READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_MASK); 1241 1242 /* 1243 ** Each rope only gets part of the distributed range. 1244 ** Adjust "window" for this rope. 1245 */ 1246 rsize /= ROPES_PER_IOC; 1247 r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); 1248 r->end = r->start + rsize; 1249 } else { 1250 r->end = r->start = 0; /* Not enabled. */ 1251 } 1252 #endif 1253 1254 /* 1255 ** "Directed" ranges are used when the "distributed range" isn't 1256 ** sufficient for all devices below a given LBA. Typically devices 1257 ** like graphics cards or X25 may need a directed range when the 1258 ** bus has multiple slots (ie multiple devices) or the device 1259 ** needs more than the typical 4 or 8MB a distributed range offers. 1260 ** 1261 ** The main reason for ignoring it now frigging complications. 1262 ** Directed ranges may overlap (and have precedence) over 1263 ** distributed ranges. Or a distributed range assigned to a unused 1264 ** rope may be used by a directed range on a different rope. 1265 ** Support for graphics devices may require fixing this 1266 ** since they may be assigned a directed range which overlaps 1267 ** an existing (but unused portion of) distributed range. 1268 */ 1269 r = &(lba_dev->hba.elmmio_space); 1270 sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", 1271 (int)lba_dev->hba.bus_num.start); 1272 r->name = lba_dev->hba.elmmio_name; 1273 1274 #if 1 1275 /* See comment which precedes call to sba_directed_lmmio() */ 1276 sba_directed_lmmio(pa_dev, r); 1277 #else 1278 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_BASE); 1279 1280 if (r->start & 1) { 1281 unsigned long rsize; 1282 r->flags = IORESOURCE_MEM; 1283 /* mmio_mask also clears Enable bit */ 1284 r->start &= mmio_mask; 1285 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start); 1286 rsize = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_MASK); 1287 r->end = r->start + ~rsize; 1288 } 1289 #endif 1290 1291 r = &(lba_dev->hba.io_space); 1292 sprintf(lba_dev->hba.io_name, "PCI%02x Ports", 1293 (int)lba_dev->hba.bus_num.start); 1294 r->name = lba_dev->hba.io_name; 1295 r->flags = IORESOURCE_IO; 1296 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_IOS_BASE) & ~1L; 1297 r->end = r->start + (READ_REG32(lba_dev->hba.base_addr + LBA_IOS_MASK) ^ (HBA_PORT_SPACE_SIZE - 1)); 1298 1299 /* Virtualize the I/O Port space ranges */ 1300 lba_num = HBA_PORT_BASE(lba_dev->hba.hba_num); 1301 r->start |= lba_num; 1302 r->end |= lba_num; 1303 } 1304 1305 1306 /************************************************************************** 1307 ** 1308 ** LBA initialization code (HW and SW) 1309 ** 1310 ** o identify LBA chip itself 1311 ** o initialize LBA chip modes (HardFail) 1312 ** o FIXME: initialize DMA hints for reasonable defaults 1313 ** o enable configuration functions 1314 ** o call pci_register_ops() to discover devs (fixup/fixup_bus get invoked) 1315 ** 1316 **************************************************************************/ 1317 1318 static int __init 1319 lba_hw_init(struct lba_device *d) 1320 { 1321 u32 stat; 1322 u32 bus_reset; /* PDC_PAT_BUG */ 1323 1324 #if 0 1325 printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n", 1326 d->hba.base_addr, 1327 READ_REG64(d->hba.base_addr + LBA_STAT_CTL), 1328 READ_REG64(d->hba.base_addr + LBA_ERROR_CONFIG), 1329 READ_REG64(d->hba.base_addr + LBA_ERROR_STATUS), 1330 READ_REG64(d->hba.base_addr + LBA_DMA_CTL) ); 1331 printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n", 1332 READ_REG64(d->hba.base_addr + LBA_ARB_MASK), 1333 READ_REG64(d->hba.base_addr + LBA_ARB_PRI), 1334 READ_REG64(d->hba.base_addr + LBA_ARB_MODE), 1335 READ_REG64(d->hba.base_addr + LBA_ARB_MTLT) ); 1336 printk(KERN_DEBUG " HINT cfg 0x%Lx\n", 1337 READ_REG64(d->hba.base_addr + LBA_HINT_CFG)); 1338 printk(KERN_DEBUG " HINT reg "); 1339 { int i; 1340 for (i=LBA_HINT_BASE; i< (14*8 + LBA_HINT_BASE); i+=8) 1341 printk(" %Lx", READ_REG64(d->hba.base_addr + i)); 1342 } 1343 printk("\n"); 1344 #endif /* DEBUG_LBA_PAT */ 1345 1346 #ifdef CONFIG_64BIT 1347 /* 1348 * FIXME add support for PDC_PAT_IO "Get slot status" - OLAR support 1349 * Only N-Class and up can really make use of Get slot status. 1350 * maybe L-class too but I've never played with it there. 1351 */ 1352 #endif 1353 1354 /* PDC_PAT_BUG: exhibited in rev 40.48 on L2000 */ 1355 bus_reset = READ_REG32(d->hba.base_addr + LBA_STAT_CTL + 4) & 1; 1356 if (bus_reset) { 1357 printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n"); 1358 } 1359 1360 stat = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); 1361 if (stat & LBA_SMART_MODE) { 1362 printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n"); 1363 stat &= ~LBA_SMART_MODE; 1364 WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG); 1365 } 1366 1367 /* Set HF mode as the default (vs. -1 mode). */ 1368 stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); 1369 WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL); 1370 1371 /* 1372 ** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal 1373 ** if it's not already set. If we just cleared the PCI Bus Reset 1374 ** signal, wait a bit for the PCI devices to recover and setup. 1375 */ 1376 if (bus_reset) 1377 mdelay(pci_post_reset_delay); 1378 1379 if (0 == READ_REG32(d->hba.base_addr + LBA_ARB_MASK)) { 1380 /* 1381 ** PDC_PAT_BUG: PDC rev 40.48 on L2000. 1382 ** B2000/C3600/J6000 also have this problem? 1383 ** 1384 ** Elroys with hot pluggable slots don't get configured 1385 ** correctly if the slot is empty. ARB_MASK is set to 0 1386 ** and we can't master transactions on the bus if it's 1387 ** not at least one. 0x3 enables elroy and first slot. 1388 */ 1389 printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n"); 1390 WRITE_REG32(0x3, d->hba.base_addr + LBA_ARB_MASK); 1391 } 1392 1393 /* 1394 ** FIXME: Hint registers are programmed with default hint 1395 ** values by firmware. Hints should be sane even if we 1396 ** can't reprogram them the way drivers want. 1397 */ 1398 return 0; 1399 } 1400 1401 /* 1402 * Unfortunately, when firmware numbers busses, it doesn't take into account 1403 * Cardbus bridges. So we have to renumber the busses to suit ourselves. 1404 * Elroy/Mercury don't actually know what bus number they're attached to; 1405 * we use bus 0 to indicate the directly attached bus and any other bus 1406 * number will be taken care of by the PCI-PCI bridge. 1407 */ 1408 static unsigned int lba_next_bus = 0; 1409 1410 /* 1411 * Determine if lba should claim this chip (return 0) or not (return 1). 1412 * If so, initialize the chip and tell other partners in crime they 1413 * have work to do. 1414 */ 1415 static int __init 1416 lba_driver_probe(struct parisc_device *dev) 1417 { 1418 struct lba_device *lba_dev; 1419 LIST_HEAD(resources); 1420 struct pci_bus *lba_bus; 1421 struct pci_ops *cfg_ops; 1422 u32 func_class; 1423 void *tmp_obj; 1424 char *version; 1425 void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096); 1426 int max; 1427 1428 /* Read HW Rev First */ 1429 func_class = READ_REG32(addr + LBA_FCLASS); 1430 1431 if (IS_ELROY(dev)) { 1432 func_class &= 0xf; 1433 switch (func_class) { 1434 case 0: version = "TR1.0"; break; 1435 case 1: version = "TR2.0"; break; 1436 case 2: version = "TR2.1"; break; 1437 case 3: version = "TR2.2"; break; 1438 case 4: version = "TR3.0"; break; 1439 case 5: version = "TR4.0"; break; 1440 default: version = "TR4+"; 1441 } 1442 1443 printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n", 1444 version, func_class & 0xf, (long)dev->hpa.start); 1445 1446 if (func_class < 2) { 1447 printk(KERN_WARNING "Can't support LBA older than " 1448 "TR2.1 - continuing under adversity.\n"); 1449 } 1450 1451 #if 0 1452 /* Elroy TR4.0 should work with simple algorithm. 1453 But it doesn't. Still missing something. *sigh* 1454 */ 1455 if (func_class > 4) { 1456 cfg_ops = &mercury_cfg_ops; 1457 } else 1458 #endif 1459 { 1460 cfg_ops = &elroy_cfg_ops; 1461 } 1462 1463 } else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) { 1464 int major, minor; 1465 1466 func_class &= 0xff; 1467 major = func_class >> 4, minor = func_class & 0xf; 1468 1469 /* We could use one printk for both Elroy and Mercury, 1470 * but for the mask for func_class. 1471 */ 1472 printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n", 1473 IS_MERCURY(dev) ? "Mercury" : "Quicksilver", major, 1474 minor, func_class, (long)dev->hpa.start); 1475 1476 cfg_ops = &mercury_cfg_ops; 1477 } else { 1478 printk(KERN_ERR "Unknown LBA found at 0x%lx\n", 1479 (long)dev->hpa.start); 1480 return -ENODEV; 1481 } 1482 1483 /* Tell I/O SAPIC driver we have a IRQ handler/region. */ 1484 tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); 1485 1486 /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't 1487 ** have an IRT entry will get NULL back from iosapic code. 1488 */ 1489 1490 lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL); 1491 if (!lba_dev) { 1492 printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n"); 1493 return(1); 1494 } 1495 1496 1497 /* ---------- First : initialize data we already have --------- */ 1498 1499 lba_dev->hw_rev = func_class; 1500 lba_dev->hba.base_addr = addr; 1501 lba_dev->hba.dev = dev; 1502 lba_dev->iosapic_obj = tmp_obj; /* save interrupt handle */ 1503 lba_dev->hba.iommu = sba_get_iommu(dev); /* get iommu data */ 1504 parisc_set_drvdata(dev, lba_dev); 1505 1506 /* ------------ Second : initialize common stuff ---------- */ 1507 pci_bios = &lba_bios_ops; 1508 pcibios_register_hba(HBA_DATA(lba_dev)); 1509 spin_lock_init(&lba_dev->lba_lock); 1510 1511 if (lba_hw_init(lba_dev)) 1512 return(1); 1513 1514 /* ---------- Third : setup I/O Port and MMIO resources --------- */ 1515 1516 if (is_pdc_pat()) { 1517 /* PDC PAT firmware uses PIOP region of GMMIO space. */ 1518 pci_port = &lba_pat_port_ops; 1519 /* Go ask PDC PAT what resources this LBA has */ 1520 lba_pat_resources(dev, lba_dev); 1521 } else { 1522 if (!astro_iop_base) { 1523 /* Sprockets PDC uses NPIOP region */ 1524 astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024); 1525 pci_port = &lba_astro_port_ops; 1526 } 1527 1528 /* Poke the chip a bit for /proc output */ 1529 lba_legacy_resources(dev, lba_dev); 1530 } 1531 1532 if (lba_dev->hba.bus_num.start < lba_next_bus) 1533 lba_dev->hba.bus_num.start = lba_next_bus; 1534 1535 /* Overlaps with elmmio can (and should) fail here. 1536 * We will prune (or ignore) the distributed range. 1537 * 1538 * FIXME: SBA code should register all elmmio ranges first. 1539 * that would take care of elmmio ranges routed 1540 * to a different rope (already discovered) from 1541 * getting registered *after* LBA code has already 1542 * registered it's distributed lmmio range. 1543 */ 1544 if (truncate_pat_collision(&iomem_resource, 1545 &(lba_dev->hba.lmmio_space))) { 1546 printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n", 1547 (long)lba_dev->hba.lmmio_space.start, 1548 (long)lba_dev->hba.lmmio_space.end); 1549 lba_dev->hba.lmmio_space.flags = 0; 1550 } 1551 1552 pci_add_resource_offset(&resources, &lba_dev->hba.io_space, 1553 HBA_PORT_BASE(lba_dev->hba.hba_num)); 1554 if (lba_dev->hba.elmmio_space.flags) 1555 pci_add_resource_offset(&resources, &lba_dev->hba.elmmio_space, 1556 lba_dev->hba.lmmio_space_offset); 1557 if (lba_dev->hba.lmmio_space.flags) 1558 pci_add_resource_offset(&resources, &lba_dev->hba.lmmio_space, 1559 lba_dev->hba.lmmio_space_offset); 1560 if (lba_dev->hba.gmmio_space.flags) 1561 pci_add_resource(&resources, &lba_dev->hba.gmmio_space); 1562 1563 pci_add_resource(&resources, &lba_dev->hba.bus_num); 1564 1565 dev->dev.platform_data = lba_dev; 1566 lba_bus = lba_dev->hba.hba_bus = 1567 pci_create_root_bus(&dev->dev, lba_dev->hba.bus_num.start, 1568 cfg_ops, NULL, &resources); 1569 if (!lba_bus) { 1570 pci_free_resource_list(&resources); 1571 return 0; 1572 } 1573 1574 max = pci_scan_child_bus(lba_bus); 1575 1576 /* This is in lieu of calling pci_assign_unassigned_resources() */ 1577 if (is_pdc_pat()) { 1578 /* assign resources to un-initialized devices */ 1579 1580 DBG_PAT("LBA pci_bus_size_bridges()\n"); 1581 pci_bus_size_bridges(lba_bus); 1582 1583 DBG_PAT("LBA pci_bus_assign_resources()\n"); 1584 pci_bus_assign_resources(lba_bus); 1585 1586 #ifdef DEBUG_LBA_PAT 1587 DBG_PAT("\nLBA PIOP resource tree\n"); 1588 lba_dump_res(&lba_dev->hba.io_space, 2); 1589 DBG_PAT("\nLBA LMMIO resource tree\n"); 1590 lba_dump_res(&lba_dev->hba.lmmio_space, 2); 1591 #endif 1592 } 1593 1594 /* 1595 ** Once PCI register ops has walked the bus, access to config 1596 ** space is restricted. Avoids master aborts on config cycles. 1597 ** Early LBA revs go fatal on *any* master abort. 1598 */ 1599 if (cfg_ops == &elroy_cfg_ops) { 1600 lba_dev->flags |= LBA_FLAG_SKIP_PROBE; 1601 } 1602 1603 lba_next_bus = max + 1; 1604 pci_bus_add_devices(lba_bus); 1605 1606 /* Whew! Finally done! Tell services we got this one covered. */ 1607 return 0; 1608 } 1609 1610 static struct parisc_device_id lba_tbl[] = { 1611 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, ELROY_HVERS, 0xa }, 1612 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, MERCURY_HVERS, 0xa }, 1613 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, QUICKSILVER_HVERS, 0xa }, 1614 { 0, } 1615 }; 1616 1617 static struct parisc_driver lba_driver = { 1618 .name = MODULE_NAME, 1619 .id_table = lba_tbl, 1620 .probe = lba_driver_probe, 1621 }; 1622 1623 /* 1624 ** One time initialization to let the world know the LBA was found. 1625 ** Must be called exactly once before pci_init(). 1626 */ 1627 void __init lba_init(void) 1628 { 1629 register_parisc_driver(&lba_driver); 1630 } 1631 1632 /* 1633 ** Initialize the IBASE/IMASK registers for LBA (Elroy). 1634 ** Only called from sba_iommu.c in order to route ranges (MMIO vs DMA). 1635 ** sba_iommu is responsible for locking (none needed at init time). 1636 */ 1637 void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) 1638 { 1639 void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096); 1640 1641 imask <<= 2; /* adjust for hints - 2 more bits */ 1642 1643 /* Make sure we aren't trying to set bits that aren't writeable. */ 1644 WARN_ON((ibase & 0x001fffff) != 0); 1645 WARN_ON((imask & 0x001fffff) != 0); 1646 1647 DBG("%s() ibase 0x%x imask 0x%x\n", __func__, ibase, imask); 1648 WRITE_REG32( imask, base_addr + LBA_IMASK); 1649 WRITE_REG32( ibase, base_addr + LBA_IBASE); 1650 iounmap(base_addr); 1651 } 1652 1653