1 /* 2 ** 3 ** PCI Lower Bus Adapter (LBA) manager 4 ** 5 ** (c) Copyright 1999,2000 Grant Grundler 6 ** (c) Copyright 1999,2000 Hewlett-Packard Company 7 ** 8 ** This program is free software; you can redistribute it and/or modify 9 ** it under the terms of the GNU General Public License as published by 10 ** the Free Software Foundation; either version 2 of the License, or 11 ** (at your option) any later version. 12 ** 13 ** 14 ** This module primarily provides access to PCI bus (config/IOport 15 ** spaces) on platforms with an SBA/LBA chipset. A/B/C/J/L/N-class 16 ** with 4 digit model numbers - eg C3000 (and A400...sigh). 17 ** 18 ** LBA driver isn't as simple as the Dino driver because: 19 ** (a) this chip has substantial bug fixes between revisions 20 ** (Only one Dino bug has a software workaround :^( ) 21 ** (b) has more options which we don't (yet) support (DMA hints, OLARD) 22 ** (c) IRQ support lives in the I/O SAPIC driver (not with PCI driver) 23 ** (d) play nicely with both PAT and "Legacy" PA-RISC firmware (PDC). 24 ** (dino only deals with "Legacy" PDC) 25 ** 26 ** LBA driver passes the I/O SAPIC HPA to the I/O SAPIC driver. 27 ** (I/O SAPIC is integratd in the LBA chip). 28 ** 29 ** FIXME: Add support to SBA and LBA drivers for DMA hint sets 30 ** FIXME: Add support for PCI card hot-plug (OLARD). 31 */ 32 33 #include <linux/delay.h> 34 #include <linux/types.h> 35 #include <linux/kernel.h> 36 #include <linux/spinlock.h> 37 #include <linux/init.h> /* for __init and __devinit */ 38 #include <linux/pci.h> 39 #include <linux/ioport.h> 40 #include <linux/slab.h> 41 42 #include <asm/byteorder.h> 43 #include <asm/pdc.h> 44 #include <asm/pdcpat.h> 45 #include <asm/page.h> 46 #include <asm/system.h> 47 48 #include <asm/ropes.h> 49 #include <asm/hardware.h> /* for register_parisc_driver() stuff */ 50 #include <asm/parisc-device.h> 51 #include <asm/io.h> /* read/write stuff */ 52 53 #undef DEBUG_LBA /* general stuff */ 54 #undef DEBUG_LBA_PORT /* debug I/O Port access */ 55 #undef DEBUG_LBA_CFG /* debug Config Space Access (ie PCI Bus walk) */ 56 #undef DEBUG_LBA_PAT /* debug PCI Resource Mgt code - PDC PAT only */ 57 58 #undef FBB_SUPPORT /* Fast Back-Back xfers - NOT READY YET */ 59 60 61 #ifdef DEBUG_LBA 62 #define DBG(x...) printk(x) 63 #else 64 #define DBG(x...) 65 #endif 66 67 #ifdef DEBUG_LBA_PORT 68 #define DBG_PORT(x...) printk(x) 69 #else 70 #define DBG_PORT(x...) 71 #endif 72 73 #ifdef DEBUG_LBA_CFG 74 #define DBG_CFG(x...) printk(x) 75 #else 76 #define DBG_CFG(x...) 77 #endif 78 79 #ifdef DEBUG_LBA_PAT 80 #define DBG_PAT(x...) printk(x) 81 #else 82 #define DBG_PAT(x...) 83 #endif 84 85 86 /* 87 ** Config accessor functions only pass in the 8-bit bus number and not 88 ** the 8-bit "PCI Segment" number. Each LBA will be assigned a PCI bus 89 ** number based on what firmware wrote into the scratch register. 90 ** 91 ** The "secondary" bus number is set to this before calling 92 ** pci_register_ops(). If any PPB's are present, the scan will 93 ** discover them and update the "secondary" and "subordinate" 94 ** fields in the pci_bus structure. 95 ** 96 ** Changes in the configuration *may* result in a different 97 ** bus number for each LBA depending on what firmware does. 98 */ 99 100 #define MODULE_NAME "LBA" 101 102 /* non-postable I/O port space, densely packed */ 103 #define LBA_PORT_BASE (PCI_F_EXTEND | 0xfee00000UL) 104 static void __iomem *astro_iop_base __read_mostly; 105 106 static u32 lba_t32; 107 108 /* lba flags */ 109 #define LBA_FLAG_SKIP_PROBE 0x10 110 111 #define LBA_SKIP_PROBE(d) ((d)->flags & LBA_FLAG_SKIP_PROBE) 112 113 114 /* Looks nice and keeps the compiler happy */ 115 #define LBA_DEV(d) ((struct lba_device *) (d)) 116 117 118 /* 119 ** Only allow 8 subsidiary busses per LBA 120 ** Problem is the PCI bus numbering is globally shared. 121 */ 122 #define LBA_MAX_NUM_BUSES 8 123 124 /************************************ 125 * LBA register read and write support 126 * 127 * BE WARNED: register writes are posted. 128 * (ie follow writes which must reach HW with a read) 129 */ 130 #define READ_U8(addr) __raw_readb(addr) 131 #define READ_U16(addr) __raw_readw(addr) 132 #define READ_U32(addr) __raw_readl(addr) 133 #define WRITE_U8(value, addr) __raw_writeb(value, addr) 134 #define WRITE_U16(value, addr) __raw_writew(value, addr) 135 #define WRITE_U32(value, addr) __raw_writel(value, addr) 136 137 #define READ_REG8(addr) readb(addr) 138 #define READ_REG16(addr) readw(addr) 139 #define READ_REG32(addr) readl(addr) 140 #define READ_REG64(addr) readq(addr) 141 #define WRITE_REG8(value, addr) writeb(value, addr) 142 #define WRITE_REG16(value, addr) writew(value, addr) 143 #define WRITE_REG32(value, addr) writel(value, addr) 144 145 146 #define LBA_CFG_TOK(bus,dfn) ((u32) ((bus)<<16 | (dfn)<<8)) 147 #define LBA_CFG_BUS(tok) ((u8) ((tok)>>16)) 148 #define LBA_CFG_DEV(tok) ((u8) ((tok)>>11) & 0x1f) 149 #define LBA_CFG_FUNC(tok) ((u8) ((tok)>>8 ) & 0x7) 150 151 152 /* 153 ** Extract LBA (Rope) number from HPA 154 ** REVISIT: 16 ropes for Stretch/Ike? 155 */ 156 #define ROPES_PER_IOC 8 157 #define LBA_NUM(x) ((((unsigned long) x) >> 13) & (ROPES_PER_IOC-1)) 158 159 160 static void 161 lba_dump_res(struct resource *r, int d) 162 { 163 int i; 164 165 if (NULL == r) 166 return; 167 168 printk(KERN_DEBUG "(%p)", r->parent); 169 for (i = d; i ; --i) printk(" "); 170 printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r, 171 (long)r->start, (long)r->end, r->flags); 172 lba_dump_res(r->child, d+2); 173 lba_dump_res(r->sibling, d); 174 } 175 176 177 /* 178 ** LBA rev 2.0, 2.1, 2.2, and 3.0 bus walks require a complex 179 ** workaround for cfg cycles: 180 ** -- preserve LBA state 181 ** -- prevent any DMA from occurring 182 ** -- turn on smart mode 183 ** -- probe with config writes before doing config reads 184 ** -- check ERROR_STATUS 185 ** -- clear ERROR_STATUS 186 ** -- restore LBA state 187 ** 188 ** The workaround is only used for device discovery. 189 */ 190 191 static int lba_device_present(u8 bus, u8 dfn, struct lba_device *d) 192 { 193 u8 first_bus = d->hba.hba_bus->secondary; 194 u8 last_sub_bus = d->hba.hba_bus->subordinate; 195 196 if ((bus < first_bus) || 197 (bus > last_sub_bus) || 198 ((bus - first_bus) >= LBA_MAX_NUM_BUSES)) { 199 return 0; 200 } 201 202 return 1; 203 } 204 205 206 207 #define LBA_CFG_SETUP(d, tok) { \ 208 /* Save contents of error config register. */ \ 209 error_config = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); \ 210 \ 211 /* Save contents of status control register. */ \ 212 status_control = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); \ 213 \ 214 /* For LBA rev 2.0, 2.1, 2.2, and 3.0, we must disable DMA \ 215 ** arbitration for full bus walks. \ 216 */ \ 217 /* Save contents of arb mask register. */ \ 218 arb_mask = READ_REG32(d->hba.base_addr + LBA_ARB_MASK); \ 219 \ 220 /* \ 221 * Turn off all device arbitration bits (i.e. everything \ 222 * except arbitration enable bit). \ 223 */ \ 224 WRITE_REG32(0x1, d->hba.base_addr + LBA_ARB_MASK); \ 225 \ 226 /* \ 227 * Set the smart mode bit so that master aborts don't cause \ 228 * LBA to go into PCI fatal mode (required). \ 229 */ \ 230 WRITE_REG32(error_config | LBA_SMART_MODE, d->hba.base_addr + LBA_ERROR_CONFIG); \ 231 } 232 233 234 #define LBA_CFG_PROBE(d, tok) { \ 235 /* \ 236 * Setup Vendor ID write and read back the address register \ 237 * to make sure that LBA is the bus master. \ 238 */ \ 239 WRITE_REG32(tok | PCI_VENDOR_ID, (d)->hba.base_addr + LBA_PCI_CFG_ADDR);\ 240 /* \ 241 * Read address register to ensure that LBA is the bus master, \ 242 * which implies that DMA traffic has stopped when DMA arb is off. \ 243 */ \ 244 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 245 /* \ 246 * Generate a cfg write cycle (will have no affect on \ 247 * Vendor ID register since read-only). \ 248 */ \ 249 WRITE_REG32(~0, (d)->hba.base_addr + LBA_PCI_CFG_DATA); \ 250 /* \ 251 * Make sure write has completed before proceeding further, \ 252 * i.e. before setting clear enable. \ 253 */ \ 254 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 255 } 256 257 258 /* 259 * HPREVISIT: 260 * -- Can't tell if config cycle got the error. 261 * 262 * OV bit is broken until rev 4.0, so can't use OV bit and 263 * LBA_ERROR_LOG_ADDR to tell if error belongs to config cycle. 264 * 265 * As of rev 4.0, no longer need the error check. 266 * 267 * -- Even if we could tell, we still want to return -1 268 * for **ANY** error (not just master abort). 269 * 270 * -- Only clear non-fatal errors (we don't want to bring 271 * LBA out of pci-fatal mode). 272 * 273 * Actually, there is still a race in which 274 * we could be clearing a fatal error. We will 275 * live with this during our initial bus walk 276 * until rev 4.0 (no driver activity during 277 * initial bus walk). The initial bus walk 278 * has race conditions concerning the use of 279 * smart mode as well. 280 */ 281 282 #define LBA_MASTER_ABORT_ERROR 0xc 283 #define LBA_FATAL_ERROR 0x10 284 285 #define LBA_CFG_MASTER_ABORT_CHECK(d, base, tok, error) { \ 286 u32 error_status = 0; \ 287 /* \ 288 * Set clear enable (CE) bit. Unset by HW when new \ 289 * errors are logged -- LBA HW ERS section 14.3.3). \ 290 */ \ 291 WRITE_REG32(status_control | CLEAR_ERRLOG_ENABLE, base + LBA_STAT_CTL); \ 292 error_status = READ_REG32(base + LBA_ERROR_STATUS); \ 293 if ((error_status & 0x1f) != 0) { \ 294 /* \ 295 * Fail the config read request. \ 296 */ \ 297 error = 1; \ 298 if ((error_status & LBA_FATAL_ERROR) == 0) { \ 299 /* \ 300 * Clear error status (if fatal bit not set) by setting \ 301 * clear error log bit (CL). \ 302 */ \ 303 WRITE_REG32(status_control | CLEAR_ERRLOG, base + LBA_STAT_CTL); \ 304 } \ 305 } \ 306 } 307 308 #define LBA_CFG_TR4_ADDR_SETUP(d, addr) \ 309 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); 310 311 #define LBA_CFG_ADDR_SETUP(d, addr) { \ 312 WRITE_REG32(((addr) & ~3), (d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 313 /* \ 314 * Read address register to ensure that LBA is the bus master, \ 315 * which implies that DMA traffic has stopped when DMA arb is off. \ 316 */ \ 317 lba_t32 = READ_REG32((d)->hba.base_addr + LBA_PCI_CFG_ADDR); \ 318 } 319 320 321 #define LBA_CFG_RESTORE(d, base) { \ 322 /* \ 323 * Restore status control register (turn off clear enable). \ 324 */ \ 325 WRITE_REG32(status_control, base + LBA_STAT_CTL); \ 326 /* \ 327 * Restore error config register (turn off smart mode). \ 328 */ \ 329 WRITE_REG32(error_config, base + LBA_ERROR_CONFIG); \ 330 /* \ 331 * Restore arb mask register (reenables DMA arbitration). \ 332 */ \ 333 WRITE_REG32(arb_mask, base + LBA_ARB_MASK); \ 334 } 335 336 337 338 static unsigned int 339 lba_rd_cfg(struct lba_device *d, u32 tok, u8 reg, u32 size) 340 { 341 u32 data = ~0U; 342 int error = 0; 343 u32 arb_mask = 0; /* used by LBA_CFG_SETUP/RESTORE */ 344 u32 error_config = 0; /* used by LBA_CFG_SETUP/RESTORE */ 345 u32 status_control = 0; /* used by LBA_CFG_SETUP/RESTORE */ 346 347 LBA_CFG_SETUP(d, tok); 348 LBA_CFG_PROBE(d, tok); 349 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error); 350 if (!error) { 351 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 352 353 LBA_CFG_ADDR_SETUP(d, tok | reg); 354 switch (size) { 355 case 1: data = (u32) READ_REG8(data_reg + (reg & 3)); break; 356 case 2: data = (u32) READ_REG16(data_reg+ (reg & 2)); break; 357 case 4: data = READ_REG32(data_reg); break; 358 } 359 } 360 LBA_CFG_RESTORE(d, d->hba.base_addr); 361 return(data); 362 } 363 364 365 static int elroy_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data) 366 { 367 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 368 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary; 369 u32 tok = LBA_CFG_TOK(local_bus, devfn); 370 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 371 372 if ((pos > 255) || (devfn > 255)) 373 return -EINVAL; 374 375 /* FIXME: B2K/C3600 workaround is always use old method... */ 376 /* if (!LBA_SKIP_PROBE(d)) */ { 377 /* original - Generate config cycle on broken elroy 378 with risk we will miss PCI bus errors. */ 379 *data = lba_rd_cfg(d, tok, pos, size); 380 DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __func__, tok, pos, *data); 381 return 0; 382 } 383 384 if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->secondary, devfn, d)) { 385 DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos); 386 /* either don't want to look or know device isn't present. */ 387 *data = ~0U; 388 return(0); 389 } 390 391 /* Basic Algorithm 392 ** Should only get here on fully working LBA rev. 393 ** This is how simple the code should have been. 394 */ 395 LBA_CFG_ADDR_SETUP(d, tok | pos); 396 switch(size) { 397 case 1: *data = READ_REG8 (data_reg + (pos & 3)); break; 398 case 2: *data = READ_REG16(data_reg + (pos & 2)); break; 399 case 4: *data = READ_REG32(data_reg); break; 400 } 401 DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __func__, tok, pos, *data); 402 return 0; 403 } 404 405 406 static void 407 lba_wr_cfg(struct lba_device *d, u32 tok, u8 reg, u32 data, u32 size) 408 { 409 int error = 0; 410 u32 arb_mask = 0; 411 u32 error_config = 0; 412 u32 status_control = 0; 413 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 414 415 LBA_CFG_SETUP(d, tok); 416 LBA_CFG_ADDR_SETUP(d, tok | reg); 417 switch (size) { 418 case 1: WRITE_REG8 (data, data_reg + (reg & 3)); break; 419 case 2: WRITE_REG16(data, data_reg + (reg & 2)); break; 420 case 4: WRITE_REG32(data, data_reg); break; 421 } 422 LBA_CFG_MASTER_ABORT_CHECK(d, d->hba.base_addr, tok, error); 423 LBA_CFG_RESTORE(d, d->hba.base_addr); 424 } 425 426 427 /* 428 * LBA 4.0 config write code implements non-postable semantics 429 * by doing a read of CONFIG ADDR after the write. 430 */ 431 432 static int elroy_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data) 433 { 434 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 435 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary; 436 u32 tok = LBA_CFG_TOK(local_bus,devfn); 437 438 if ((pos > 255) || (devfn > 255)) 439 return -EINVAL; 440 441 if (!LBA_SKIP_PROBE(d)) { 442 /* Original Workaround */ 443 lba_wr_cfg(d, tok, pos, (u32) data, size); 444 DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __func__, tok, pos,data); 445 return 0; 446 } 447 448 if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->secondary, devfn, d))) { 449 DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data); 450 return 1; /* New Workaround */ 451 } 452 453 DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __func__, tok, pos, data); 454 455 /* Basic Algorithm */ 456 LBA_CFG_ADDR_SETUP(d, tok | pos); 457 switch(size) { 458 case 1: WRITE_REG8 (data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 3)); 459 break; 460 case 2: WRITE_REG16(data, d->hba.base_addr + LBA_PCI_CFG_DATA + (pos & 2)); 461 break; 462 case 4: WRITE_REG32(data, d->hba.base_addr + LBA_PCI_CFG_DATA); 463 break; 464 } 465 /* flush posted write */ 466 lba_t32 = READ_REG32(d->hba.base_addr + LBA_PCI_CFG_ADDR); 467 return 0; 468 } 469 470 471 static struct pci_ops elroy_cfg_ops = { 472 .read = elroy_cfg_read, 473 .write = elroy_cfg_write, 474 }; 475 476 /* 477 * The mercury_cfg_ops are slightly misnamed; they're also used for Elroy 478 * TR4.0 as no additional bugs were found in this areea between Elroy and 479 * Mercury 480 */ 481 482 static int mercury_cfg_read(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 *data) 483 { 484 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 485 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary; 486 u32 tok = LBA_CFG_TOK(local_bus, devfn); 487 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 488 489 if ((pos > 255) || (devfn > 255)) 490 return -EINVAL; 491 492 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); 493 switch(size) { 494 case 1: 495 *data = READ_REG8(data_reg + (pos & 3)); 496 break; 497 case 2: 498 *data = READ_REG16(data_reg + (pos & 2)); 499 break; 500 case 4: 501 *data = READ_REG32(data_reg); break; 502 break; 503 } 504 505 DBG_CFG("mercury_cfg_read(%x+%2x) -> 0x%x\n", tok, pos, *data); 506 return 0; 507 } 508 509 /* 510 * LBA 4.0 config write code implements non-postable semantics 511 * by doing a read of CONFIG ADDR after the write. 512 */ 513 514 static int mercury_cfg_write(struct pci_bus *bus, unsigned int devfn, int pos, int size, u32 data) 515 { 516 struct lba_device *d = LBA_DEV(parisc_walk_tree(bus->bridge)); 517 void __iomem *data_reg = d->hba.base_addr + LBA_PCI_CFG_DATA; 518 u32 local_bus = (bus->parent == NULL) ? 0 : bus->secondary; 519 u32 tok = LBA_CFG_TOK(local_bus,devfn); 520 521 if ((pos > 255) || (devfn > 255)) 522 return -EINVAL; 523 524 DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __func__, tok, pos, data); 525 526 LBA_CFG_TR4_ADDR_SETUP(d, tok | pos); 527 switch(size) { 528 case 1: 529 WRITE_REG8 (data, data_reg + (pos & 3)); 530 break; 531 case 2: 532 WRITE_REG16(data, data_reg + (pos & 2)); 533 break; 534 case 4: 535 WRITE_REG32(data, data_reg); 536 break; 537 } 538 539 /* flush posted write */ 540 lba_t32 = READ_U32(d->hba.base_addr + LBA_PCI_CFG_ADDR); 541 return 0; 542 } 543 544 static struct pci_ops mercury_cfg_ops = { 545 .read = mercury_cfg_read, 546 .write = mercury_cfg_write, 547 }; 548 549 550 static void 551 lba_bios_init(void) 552 { 553 DBG(MODULE_NAME ": lba_bios_init\n"); 554 } 555 556 557 #ifdef CONFIG_64BIT 558 559 /* 560 * truncate_pat_collision: Deal with overlaps or outright collisions 561 * between PAT PDC reported ranges. 562 * 563 * Broken PA8800 firmware will report lmmio range that 564 * overlaps with CPU HPA. Just truncate the lmmio range. 565 * 566 * BEWARE: conflicts with this lmmio range may be an 567 * elmmio range which is pointing down another rope. 568 * 569 * FIXME: only deals with one collision per range...theoretically we 570 * could have several. Supporting more than one collision will get messy. 571 */ 572 static unsigned long 573 truncate_pat_collision(struct resource *root, struct resource *new) 574 { 575 unsigned long start = new->start; 576 unsigned long end = new->end; 577 struct resource *tmp = root->child; 578 579 if (end <= start || start < root->start || !tmp) 580 return 0; 581 582 /* find first overlap */ 583 while (tmp && tmp->end < start) 584 tmp = tmp->sibling; 585 586 /* no entries overlap */ 587 if (!tmp) return 0; 588 589 /* found one that starts behind the new one 590 ** Don't need to do anything. 591 */ 592 if (tmp->start >= end) return 0; 593 594 if (tmp->start <= start) { 595 /* "front" of new one overlaps */ 596 new->start = tmp->end + 1; 597 598 if (tmp->end >= end) { 599 /* AACCKK! totally overlaps! drop this range. */ 600 return 1; 601 } 602 } 603 604 if (tmp->end < end ) { 605 /* "end" of new one overlaps */ 606 new->end = tmp->start - 1; 607 } 608 609 printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] " 610 "to [%lx,%lx]\n", 611 start, end, 612 (long)new->start, (long)new->end ); 613 614 return 0; /* truncation successful */ 615 } 616 617 #else 618 #define truncate_pat_collision(r,n) (0) 619 #endif 620 621 /* 622 ** The algorithm is generic code. 623 ** But it needs to access local data structures to get the IRQ base. 624 ** Could make this a "pci_fixup_irq(bus, region)" but not sure 625 ** it's worth it. 626 ** 627 ** Called by do_pci_scan_bus() immediately after each PCI bus is walked. 628 ** Resources aren't allocated until recursive buswalk below HBA is completed. 629 */ 630 static void 631 lba_fixup_bus(struct pci_bus *bus) 632 { 633 struct list_head *ln; 634 #ifdef FBB_SUPPORT 635 u16 status; 636 #endif 637 struct lba_device *ldev = LBA_DEV(parisc_walk_tree(bus->bridge)); 638 int lba_portbase = HBA_PORT_BASE(ldev->hba.hba_num); 639 640 DBG("lba_fixup_bus(0x%p) bus %d platform_data 0x%p\n", 641 bus, bus->secondary, bus->bridge->platform_data); 642 643 /* 644 ** Properly Setup MMIO resources for this bus. 645 ** pci_alloc_primary_bus() mangles this. 646 */ 647 if (bus->parent) { 648 int i; 649 /* PCI-PCI Bridge */ 650 pci_read_bridge_bases(bus); 651 for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { 652 pci_claim_resource(bus->self, i); 653 } 654 } else { 655 /* Host-PCI Bridge */ 656 int err, i; 657 658 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n", 659 ldev->hba.io_space.name, 660 ldev->hba.io_space.start, ldev->hba.io_space.end, 661 ldev->hba.io_space.flags); 662 DBG("lba_fixup_bus() %s [%lx/%lx]/%lx\n", 663 ldev->hba.lmmio_space.name, 664 ldev->hba.lmmio_space.start, ldev->hba.lmmio_space.end, 665 ldev->hba.lmmio_space.flags); 666 667 err = request_resource(&ioport_resource, &(ldev->hba.io_space)); 668 if (err < 0) { 669 lba_dump_res(&ioport_resource, 2); 670 BUG(); 671 } 672 /* advertize Host bridge resources to PCI bus */ 673 bus->resource[0] = &(ldev->hba.io_space); 674 i = 1; 675 676 if (ldev->hba.elmmio_space.start) { 677 err = request_resource(&iomem_resource, 678 &(ldev->hba.elmmio_space)); 679 if (err < 0) { 680 681 printk("FAILED: lba_fixup_bus() request for " 682 "elmmio_space [%lx/%lx]\n", 683 (long)ldev->hba.elmmio_space.start, 684 (long)ldev->hba.elmmio_space.end); 685 686 /* lba_dump_res(&iomem_resource, 2); */ 687 /* BUG(); */ 688 } else 689 bus->resource[i++] = &(ldev->hba.elmmio_space); 690 } 691 692 693 /* Overlaps with elmmio can (and should) fail here. 694 * We will prune (or ignore) the distributed range. 695 * 696 * FIXME: SBA code should register all elmmio ranges first. 697 * that would take care of elmmio ranges routed 698 * to a different rope (already discovered) from 699 * getting registered *after* LBA code has already 700 * registered it's distributed lmmio range. 701 */ 702 if (truncate_pat_collision(&iomem_resource, 703 &(ldev->hba.lmmio_space))) { 704 705 printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n", 706 (long)ldev->hba.lmmio_space.start, 707 (long)ldev->hba.lmmio_space.end); 708 } else { 709 err = request_resource(&iomem_resource, &(ldev->hba.lmmio_space)); 710 if (err < 0) { 711 printk(KERN_ERR "FAILED: lba_fixup_bus() request for " 712 "lmmio_space [%lx/%lx]\n", 713 (long)ldev->hba.lmmio_space.start, 714 (long)ldev->hba.lmmio_space.end); 715 } else 716 bus->resource[i++] = &(ldev->hba.lmmio_space); 717 } 718 719 #ifdef CONFIG_64BIT 720 /* GMMIO is distributed range. Every LBA/Rope gets part it. */ 721 if (ldev->hba.gmmio_space.flags) { 722 err = request_resource(&iomem_resource, &(ldev->hba.gmmio_space)); 723 if (err < 0) { 724 printk("FAILED: lba_fixup_bus() request for " 725 "gmmio_space [%lx/%lx]\n", 726 (long)ldev->hba.gmmio_space.start, 727 (long)ldev->hba.gmmio_space.end); 728 lba_dump_res(&iomem_resource, 2); 729 BUG(); 730 } 731 bus->resource[i++] = &(ldev->hba.gmmio_space); 732 } 733 #endif 734 735 } 736 737 list_for_each(ln, &bus->devices) { 738 int i; 739 struct pci_dev *dev = pci_dev_b(ln); 740 741 DBG("lba_fixup_bus() %s\n", pci_name(dev)); 742 743 /* Virtualize Device/Bridge Resources. */ 744 for (i = 0; i < PCI_BRIDGE_RESOURCES; i++) { 745 struct resource *res = &dev->resource[i]; 746 747 /* If resource not allocated - skip it */ 748 if (!res->start) 749 continue; 750 751 if (res->flags & IORESOURCE_IO) { 752 DBG("lba_fixup_bus() I/O Ports [%lx/%lx] -> ", 753 res->start, res->end); 754 res->start |= lba_portbase; 755 res->end |= lba_portbase; 756 DBG("[%lx/%lx]\n", res->start, res->end); 757 } else if (res->flags & IORESOURCE_MEM) { 758 /* 759 ** Convert PCI (IO_VIEW) addresses to 760 ** processor (PA_VIEW) addresses 761 */ 762 DBG("lba_fixup_bus() MMIO [%lx/%lx] -> ", 763 res->start, res->end); 764 res->start = PCI_HOST_ADDR(HBA_DATA(ldev), res->start); 765 res->end = PCI_HOST_ADDR(HBA_DATA(ldev), res->end); 766 DBG("[%lx/%lx]\n", res->start, res->end); 767 } else { 768 DBG("lba_fixup_bus() WTF? 0x%lx [%lx/%lx] XXX", 769 res->flags, res->start, res->end); 770 } 771 772 /* 773 ** FIXME: this will result in whinging for devices 774 ** that share expansion ROMs (think quad tulip), but 775 ** isn't harmful. 776 */ 777 pci_claim_resource(dev, i); 778 } 779 780 #ifdef FBB_SUPPORT 781 /* 782 ** If one device does not support FBB transfers, 783 ** No one on the bus can be allowed to use them. 784 */ 785 (void) pci_read_config_word(dev, PCI_STATUS, &status); 786 bus->bridge_ctl &= ~(status & PCI_STATUS_FAST_BACK); 787 #endif 788 789 /* 790 ** P2PB's have no IRQs. ignore them. 791 */ 792 if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) 793 continue; 794 795 /* Adjust INTERRUPT_LINE for this dev */ 796 iosapic_fixup_irq(ldev->iosapic_obj, dev); 797 } 798 799 #ifdef FBB_SUPPORT 800 /* FIXME/REVISIT - finish figuring out to set FBB on both 801 ** pci_setup_bridge() clobbers PCI_BRIDGE_CONTROL. 802 ** Can't fixup here anyway....garr... 803 */ 804 if (fbb_enable) { 805 if (bus->parent) { 806 u8 control; 807 /* enable on PPB */ 808 (void) pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &control); 809 (void) pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, control | PCI_STATUS_FAST_BACK); 810 811 } else { 812 /* enable on LBA */ 813 } 814 fbb_enable = PCI_COMMAND_FAST_BACK; 815 } 816 817 /* Lastly enable FBB/PERR/SERR on all devices too */ 818 list_for_each(ln, &bus->devices) { 819 (void) pci_read_config_word(dev, PCI_COMMAND, &status); 820 status |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR | fbb_enable; 821 (void) pci_write_config_word(dev, PCI_COMMAND, status); 822 } 823 #endif 824 } 825 826 827 static struct pci_bios_ops lba_bios_ops = { 828 .init = lba_bios_init, 829 .fixup_bus = lba_fixup_bus, 830 }; 831 832 833 834 835 /******************************************************* 836 ** 837 ** LBA Sprockets "I/O Port" Space Accessor Functions 838 ** 839 ** This set of accessor functions is intended for use with 840 ** "legacy firmware" (ie Sprockets on Allegro/Forte boxes). 841 ** 842 ** Many PCI devices don't require use of I/O port space (eg Tulip, 843 ** NCR720) since they export the same registers to both MMIO and 844 ** I/O port space. In general I/O port space is slower than 845 ** MMIO since drivers are designed so PIO writes can be posted. 846 ** 847 ********************************************************/ 848 849 #define LBA_PORT_IN(size, mask) \ 850 static u##size lba_astro_in##size (struct pci_hba_data *d, u16 addr) \ 851 { \ 852 u##size t; \ 853 t = READ_REG##size(astro_iop_base + addr); \ 854 DBG_PORT(" 0x%x\n", t); \ 855 return (t); \ 856 } 857 858 LBA_PORT_IN( 8, 3) 859 LBA_PORT_IN(16, 2) 860 LBA_PORT_IN(32, 0) 861 862 863 864 /* 865 ** BUG X4107: Ordering broken - DMA RD return can bypass PIO WR 866 ** 867 ** Fixed in Elroy 2.2. The READ_U32(..., LBA_FUNC_ID) below is 868 ** guarantee non-postable completion semantics - not avoid X4107. 869 ** The READ_U32 only guarantees the write data gets to elroy but 870 ** out to the PCI bus. We can't read stuff from I/O port space 871 ** since we don't know what has side-effects. Attempting to read 872 ** from configuration space would be suicidal given the number of 873 ** bugs in that elroy functionality. 874 ** 875 ** Description: 876 ** DMA read results can improperly pass PIO writes (X4107). The 877 ** result of this bug is that if a processor modifies a location in 878 ** memory after having issued PIO writes, the PIO writes are not 879 ** guaranteed to be completed before a PCI device is allowed to see 880 ** the modified data in a DMA read. 881 ** 882 ** Note that IKE bug X3719 in TR1 IKEs will result in the same 883 ** symptom. 884 ** 885 ** Workaround: 886 ** The workaround for this bug is to always follow a PIO write with 887 ** a PIO read to the same bus before starting DMA on that PCI bus. 888 ** 889 */ 890 #define LBA_PORT_OUT(size, mask) \ 891 static void lba_astro_out##size (struct pci_hba_data *d, u16 addr, u##size val) \ 892 { \ 893 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, d, addr, val); \ 894 WRITE_REG##size(val, astro_iop_base + addr); \ 895 if (LBA_DEV(d)->hw_rev < 3) \ 896 lba_t32 = READ_U32(d->base_addr + LBA_FUNC_ID); \ 897 } 898 899 LBA_PORT_OUT( 8, 3) 900 LBA_PORT_OUT(16, 2) 901 LBA_PORT_OUT(32, 0) 902 903 904 static struct pci_port_ops lba_astro_port_ops = { 905 .inb = lba_astro_in8, 906 .inw = lba_astro_in16, 907 .inl = lba_astro_in32, 908 .outb = lba_astro_out8, 909 .outw = lba_astro_out16, 910 .outl = lba_astro_out32 911 }; 912 913 914 #ifdef CONFIG_64BIT 915 #define PIOP_TO_GMMIO(lba, addr) \ 916 ((lba)->iop_base + (((addr)&0xFFFC)<<10) + ((addr)&3)) 917 918 /******************************************************* 919 ** 920 ** LBA PAT "I/O Port" Space Accessor Functions 921 ** 922 ** This set of accessor functions is intended for use with 923 ** "PAT PDC" firmware (ie Prelude/Rhapsody/Piranha boxes). 924 ** 925 ** This uses the PIOP space located in the first 64MB of GMMIO. 926 ** Each rope gets a full 64*KB* (ie 4 bytes per page) this way. 927 ** bits 1:0 stay the same. bits 15:2 become 25:12. 928 ** Then add the base and we can generate an I/O Port cycle. 929 ********************************************************/ 930 #undef LBA_PORT_IN 931 #define LBA_PORT_IN(size, mask) \ 932 static u##size lba_pat_in##size (struct pci_hba_data *l, u16 addr) \ 933 { \ 934 u##size t; \ 935 DBG_PORT("%s(0x%p, 0x%x) ->", __func__, l, addr); \ 936 t = READ_REG##size(PIOP_TO_GMMIO(LBA_DEV(l), addr)); \ 937 DBG_PORT(" 0x%x\n", t); \ 938 return (t); \ 939 } 940 941 LBA_PORT_IN( 8, 3) 942 LBA_PORT_IN(16, 2) 943 LBA_PORT_IN(32, 0) 944 945 946 #undef LBA_PORT_OUT 947 #define LBA_PORT_OUT(size, mask) \ 948 static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \ 949 { \ 950 void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \ 951 DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, l, addr, val); \ 952 WRITE_REG##size(val, where); \ 953 /* flush the I/O down to the elroy at least */ \ 954 lba_t32 = READ_U32(l->base_addr + LBA_FUNC_ID); \ 955 } 956 957 LBA_PORT_OUT( 8, 3) 958 LBA_PORT_OUT(16, 2) 959 LBA_PORT_OUT(32, 0) 960 961 962 static struct pci_port_ops lba_pat_port_ops = { 963 .inb = lba_pat_in8, 964 .inw = lba_pat_in16, 965 .inl = lba_pat_in32, 966 .outb = lba_pat_out8, 967 .outw = lba_pat_out16, 968 .outl = lba_pat_out32 969 }; 970 971 972 973 /* 974 ** make range information from PDC available to PCI subsystem. 975 ** We make the PDC call here in order to get the PCI bus range 976 ** numbers. The rest will get forwarded in pcibios_fixup_bus(). 977 ** We don't have a struct pci_bus assigned to us yet. 978 */ 979 static void 980 lba_pat_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) 981 { 982 unsigned long bytecnt; 983 pdc_pat_cell_mod_maddr_block_t pa_pdc_cell; /* PA_VIEW */ 984 pdc_pat_cell_mod_maddr_block_t io_pdc_cell; /* IO_VIEW */ 985 long io_count; 986 long status; /* PDC return status */ 987 long pa_count; 988 int i; 989 990 /* return cell module (IO view) */ 991 status = pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, 992 PA_VIEW, & pa_pdc_cell); 993 pa_count = pa_pdc_cell.mod[1]; 994 995 status |= pdc_pat_cell_module(&bytecnt, pa_dev->pcell_loc, pa_dev->mod_index, 996 IO_VIEW, &io_pdc_cell); 997 io_count = io_pdc_cell.mod[1]; 998 999 /* We've already done this once for device discovery...*/ 1000 if (status != PDC_OK) { 1001 panic("pdc_pat_cell_module() call failed for LBA!\n"); 1002 } 1003 1004 if (PAT_GET_ENTITY(pa_pdc_cell.mod_info) != PAT_ENTITY_LBA) { 1005 panic("pdc_pat_cell_module() entity returned != PAT_ENTITY_LBA!\n"); 1006 } 1007 1008 /* 1009 ** Inspect the resources PAT tells us about 1010 */ 1011 for (i = 0; i < pa_count; i++) { 1012 struct { 1013 unsigned long type; 1014 unsigned long start; 1015 unsigned long end; /* aka finish */ 1016 } *p, *io; 1017 struct resource *r; 1018 1019 p = (void *) &(pa_pdc_cell.mod[2+i*3]); 1020 io = (void *) &(io_pdc_cell.mod[2+i*3]); 1021 1022 /* Convert the PAT range data to PCI "struct resource" */ 1023 switch(p->type & 0xff) { 1024 case PAT_PBNUM: 1025 lba_dev->hba.bus_num.start = p->start; 1026 lba_dev->hba.bus_num.end = p->end; 1027 break; 1028 1029 case PAT_LMMIO: 1030 /* used to fix up pre-initialized MEM BARs */ 1031 if (!lba_dev->hba.lmmio_space.start) { 1032 sprintf(lba_dev->hba.lmmio_name, 1033 "PCI%02x LMMIO", 1034 (int)lba_dev->hba.bus_num.start); 1035 lba_dev->hba.lmmio_space_offset = p->start - 1036 io->start; 1037 r = &lba_dev->hba.lmmio_space; 1038 r->name = lba_dev->hba.lmmio_name; 1039 } else if (!lba_dev->hba.elmmio_space.start) { 1040 sprintf(lba_dev->hba.elmmio_name, 1041 "PCI%02x ELMMIO", 1042 (int)lba_dev->hba.bus_num.start); 1043 r = &lba_dev->hba.elmmio_space; 1044 r->name = lba_dev->hba.elmmio_name; 1045 } else { 1046 printk(KERN_WARNING MODULE_NAME 1047 " only supports 2 LMMIO resources!\n"); 1048 break; 1049 } 1050 1051 r->start = p->start; 1052 r->end = p->end; 1053 r->flags = IORESOURCE_MEM; 1054 r->parent = r->sibling = r->child = NULL; 1055 break; 1056 1057 case PAT_GMMIO: 1058 /* MMIO space > 4GB phys addr; for 64-bit BAR */ 1059 sprintf(lba_dev->hba.gmmio_name, "PCI%02x GMMIO", 1060 (int)lba_dev->hba.bus_num.start); 1061 r = &lba_dev->hba.gmmio_space; 1062 r->name = lba_dev->hba.gmmio_name; 1063 r->start = p->start; 1064 r->end = p->end; 1065 r->flags = IORESOURCE_MEM; 1066 r->parent = r->sibling = r->child = NULL; 1067 break; 1068 1069 case PAT_NPIOP: 1070 printk(KERN_WARNING MODULE_NAME 1071 " range[%d] : ignoring NPIOP (0x%lx)\n", 1072 i, p->start); 1073 break; 1074 1075 case PAT_PIOP: 1076 /* 1077 ** Postable I/O port space is per PCI host adapter. 1078 ** base of 64MB PIOP region 1079 */ 1080 lba_dev->iop_base = ioremap_nocache(p->start, 64 * 1024 * 1024); 1081 1082 sprintf(lba_dev->hba.io_name, "PCI%02x Ports", 1083 (int)lba_dev->hba.bus_num.start); 1084 r = &lba_dev->hba.io_space; 1085 r->name = lba_dev->hba.io_name; 1086 r->start = HBA_PORT_BASE(lba_dev->hba.hba_num); 1087 r->end = r->start + HBA_PORT_SPACE_SIZE - 1; 1088 r->flags = IORESOURCE_IO; 1089 r->parent = r->sibling = r->child = NULL; 1090 break; 1091 1092 default: 1093 printk(KERN_WARNING MODULE_NAME 1094 " range[%d] : unknown pat range type (0x%lx)\n", 1095 i, p->type & 0xff); 1096 break; 1097 } 1098 } 1099 } 1100 #else 1101 /* keep compiler from complaining about missing declarations */ 1102 #define lba_pat_port_ops lba_astro_port_ops 1103 #define lba_pat_resources(pa_dev, lba_dev) 1104 #endif /* CONFIG_64BIT */ 1105 1106 1107 extern void sba_distributed_lmmio(struct parisc_device *, struct resource *); 1108 extern void sba_directed_lmmio(struct parisc_device *, struct resource *); 1109 1110 1111 static void 1112 lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev) 1113 { 1114 struct resource *r; 1115 int lba_num; 1116 1117 lba_dev->hba.lmmio_space_offset = PCI_F_EXTEND; 1118 1119 /* 1120 ** With "legacy" firmware, the lowest byte of FW_SCRATCH 1121 ** represents bus->secondary and the second byte represents 1122 ** bus->subsidiary (i.e. highest PPB programmed by firmware). 1123 ** PCI bus walk *should* end up with the same result. 1124 ** FIXME: But we don't have sanity checks in PCI or LBA. 1125 */ 1126 lba_num = READ_REG32(lba_dev->hba.base_addr + LBA_FW_SCRATCH); 1127 r = &(lba_dev->hba.bus_num); 1128 r->name = "LBA PCI Busses"; 1129 r->start = lba_num & 0xff; 1130 r->end = (lba_num>>8) & 0xff; 1131 1132 /* Set up local PCI Bus resources - we don't need them for 1133 ** Legacy boxes but it's nice to see in /proc/iomem. 1134 */ 1135 r = &(lba_dev->hba.lmmio_space); 1136 sprintf(lba_dev->hba.lmmio_name, "PCI%02x LMMIO", 1137 (int)lba_dev->hba.bus_num.start); 1138 r->name = lba_dev->hba.lmmio_name; 1139 1140 #if 1 1141 /* We want the CPU -> IO routing of addresses. 1142 * The SBA BASE/MASK registers control CPU -> IO routing. 1143 * Ask SBA what is routed to this rope/LBA. 1144 */ 1145 sba_distributed_lmmio(pa_dev, r); 1146 #else 1147 /* 1148 * The LBA BASE/MASK registers control IO -> System routing. 1149 * 1150 * The following code works but doesn't get us what we want. 1151 * Well, only because firmware (v5.0) on C3000 doesn't program 1152 * the LBA BASE/MASE registers to be the exact inverse of 1153 * the corresponding SBA registers. Other Astro/Pluto 1154 * based platform firmware may do it right. 1155 * 1156 * Should someone want to mess with MSI, they may need to 1157 * reprogram LBA BASE/MASK registers. Thus preserve the code 1158 * below until MSI is known to work on C3000/A500/N4000/RP3440. 1159 * 1160 * Using the code below, /proc/iomem shows: 1161 * ... 1162 * f0000000-f0ffffff : PCI00 LMMIO 1163 * f05d0000-f05d0000 : lcd_data 1164 * f05d0008-f05d0008 : lcd_cmd 1165 * f1000000-f1ffffff : PCI01 LMMIO 1166 * f4000000-f4ffffff : PCI02 LMMIO 1167 * f4000000-f4001fff : sym53c8xx 1168 * f4002000-f4003fff : sym53c8xx 1169 * f4004000-f40043ff : sym53c8xx 1170 * f4005000-f40053ff : sym53c8xx 1171 * f4007000-f4007fff : ohci_hcd 1172 * f4008000-f40083ff : tulip 1173 * f6000000-f6ffffff : PCI03 LMMIO 1174 * f8000000-fbffffff : PCI00 ELMMIO 1175 * fa100000-fa4fffff : stifb mmio 1176 * fb000000-fb1fffff : stifb fb 1177 * 1178 * But everything listed under PCI02 actually lives under PCI00. 1179 * This is clearly wrong. 1180 * 1181 * Asking SBA how things are routed tells the correct story: 1182 * LMMIO_BASE/MASK/ROUTE f4000001 fc000000 00000000 1183 * DIR0_BASE/MASK/ROUTE fa000001 fe000000 00000006 1184 * DIR1_BASE/MASK/ROUTE f9000001 ff000000 00000004 1185 * DIR2_BASE/MASK/ROUTE f0000000 fc000000 00000000 1186 * DIR3_BASE/MASK/ROUTE f0000000 fc000000 00000000 1187 * 1188 * Which looks like this in /proc/iomem: 1189 * f4000000-f47fffff : PCI00 LMMIO 1190 * f4000000-f4001fff : sym53c8xx 1191 * ...[deteled core devices - same as above]... 1192 * f4008000-f40083ff : tulip 1193 * f4800000-f4ffffff : PCI01 LMMIO 1194 * f6000000-f67fffff : PCI02 LMMIO 1195 * f7000000-f77fffff : PCI03 LMMIO 1196 * f9000000-f9ffffff : PCI02 ELMMIO 1197 * fa000000-fbffffff : PCI03 ELMMIO 1198 * fa100000-fa4fffff : stifb mmio 1199 * fb000000-fb1fffff : stifb fb 1200 * 1201 * ie all Built-in core are under now correctly under PCI00. 1202 * The "PCI02 ELMMIO" directed range is for: 1203 * +-[02]---03.0 3Dfx Interactive, Inc. Voodoo 2 1204 * 1205 * All is well now. 1206 */ 1207 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_BASE); 1208 if (r->start & 1) { 1209 unsigned long rsize; 1210 1211 r->flags = IORESOURCE_MEM; 1212 /* mmio_mask also clears Enable bit */ 1213 r->start &= mmio_mask; 1214 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start); 1215 rsize = ~ READ_REG32(lba_dev->hba.base_addr + LBA_LMMIO_MASK); 1216 1217 /* 1218 ** Each rope only gets part of the distributed range. 1219 ** Adjust "window" for this rope. 1220 */ 1221 rsize /= ROPES_PER_IOC; 1222 r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start); 1223 r->end = r->start + rsize; 1224 } else { 1225 r->end = r->start = 0; /* Not enabled. */ 1226 } 1227 #endif 1228 1229 /* 1230 ** "Directed" ranges are used when the "distributed range" isn't 1231 ** sufficient for all devices below a given LBA. Typically devices 1232 ** like graphics cards or X25 may need a directed range when the 1233 ** bus has multiple slots (ie multiple devices) or the device 1234 ** needs more than the typical 4 or 8MB a distributed range offers. 1235 ** 1236 ** The main reason for ignoring it now frigging complications. 1237 ** Directed ranges may overlap (and have precedence) over 1238 ** distributed ranges. Or a distributed range assigned to a unused 1239 ** rope may be used by a directed range on a different rope. 1240 ** Support for graphics devices may require fixing this 1241 ** since they may be assigned a directed range which overlaps 1242 ** an existing (but unused portion of) distributed range. 1243 */ 1244 r = &(lba_dev->hba.elmmio_space); 1245 sprintf(lba_dev->hba.elmmio_name, "PCI%02x ELMMIO", 1246 (int)lba_dev->hba.bus_num.start); 1247 r->name = lba_dev->hba.elmmio_name; 1248 1249 #if 1 1250 /* See comment which precedes call to sba_directed_lmmio() */ 1251 sba_directed_lmmio(pa_dev, r); 1252 #else 1253 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_BASE); 1254 1255 if (r->start & 1) { 1256 unsigned long rsize; 1257 r->flags = IORESOURCE_MEM; 1258 /* mmio_mask also clears Enable bit */ 1259 r->start &= mmio_mask; 1260 r->start = PCI_HOST_ADDR(HBA_DATA(lba_dev), r->start); 1261 rsize = READ_REG32(lba_dev->hba.base_addr + LBA_ELMMIO_MASK); 1262 r->end = r->start + ~rsize; 1263 } 1264 #endif 1265 1266 r = &(lba_dev->hba.io_space); 1267 sprintf(lba_dev->hba.io_name, "PCI%02x Ports", 1268 (int)lba_dev->hba.bus_num.start); 1269 r->name = lba_dev->hba.io_name; 1270 r->flags = IORESOURCE_IO; 1271 r->start = READ_REG32(lba_dev->hba.base_addr + LBA_IOS_BASE) & ~1L; 1272 r->end = r->start + (READ_REG32(lba_dev->hba.base_addr + LBA_IOS_MASK) ^ (HBA_PORT_SPACE_SIZE - 1)); 1273 1274 /* Virtualize the I/O Port space ranges */ 1275 lba_num = HBA_PORT_BASE(lba_dev->hba.hba_num); 1276 r->start |= lba_num; 1277 r->end |= lba_num; 1278 } 1279 1280 1281 /************************************************************************** 1282 ** 1283 ** LBA initialization code (HW and SW) 1284 ** 1285 ** o identify LBA chip itself 1286 ** o initialize LBA chip modes (HardFail) 1287 ** o FIXME: initialize DMA hints for reasonable defaults 1288 ** o enable configuration functions 1289 ** o call pci_register_ops() to discover devs (fixup/fixup_bus get invoked) 1290 ** 1291 **************************************************************************/ 1292 1293 static int __init 1294 lba_hw_init(struct lba_device *d) 1295 { 1296 u32 stat; 1297 u32 bus_reset; /* PDC_PAT_BUG */ 1298 1299 #if 0 1300 printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n", 1301 d->hba.base_addr, 1302 READ_REG64(d->hba.base_addr + LBA_STAT_CTL), 1303 READ_REG64(d->hba.base_addr + LBA_ERROR_CONFIG), 1304 READ_REG64(d->hba.base_addr + LBA_ERROR_STATUS), 1305 READ_REG64(d->hba.base_addr + LBA_DMA_CTL) ); 1306 printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n", 1307 READ_REG64(d->hba.base_addr + LBA_ARB_MASK), 1308 READ_REG64(d->hba.base_addr + LBA_ARB_PRI), 1309 READ_REG64(d->hba.base_addr + LBA_ARB_MODE), 1310 READ_REG64(d->hba.base_addr + LBA_ARB_MTLT) ); 1311 printk(KERN_DEBUG " HINT cfg 0x%Lx\n", 1312 READ_REG64(d->hba.base_addr + LBA_HINT_CFG)); 1313 printk(KERN_DEBUG " HINT reg "); 1314 { int i; 1315 for (i=LBA_HINT_BASE; i< (14*8 + LBA_HINT_BASE); i+=8) 1316 printk(" %Lx", READ_REG64(d->hba.base_addr + i)); 1317 } 1318 printk("\n"); 1319 #endif /* DEBUG_LBA_PAT */ 1320 1321 #ifdef CONFIG_64BIT 1322 /* 1323 * FIXME add support for PDC_PAT_IO "Get slot status" - OLAR support 1324 * Only N-Class and up can really make use of Get slot status. 1325 * maybe L-class too but I've never played with it there. 1326 */ 1327 #endif 1328 1329 /* PDC_PAT_BUG: exhibited in rev 40.48 on L2000 */ 1330 bus_reset = READ_REG32(d->hba.base_addr + LBA_STAT_CTL + 4) & 1; 1331 if (bus_reset) { 1332 printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n"); 1333 } 1334 1335 stat = READ_REG32(d->hba.base_addr + LBA_ERROR_CONFIG); 1336 if (stat & LBA_SMART_MODE) { 1337 printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n"); 1338 stat &= ~LBA_SMART_MODE; 1339 WRITE_REG32(stat, d->hba.base_addr + LBA_ERROR_CONFIG); 1340 } 1341 1342 /* Set HF mode as the default (vs. -1 mode). */ 1343 stat = READ_REG32(d->hba.base_addr + LBA_STAT_CTL); 1344 WRITE_REG32(stat | HF_ENABLE, d->hba.base_addr + LBA_STAT_CTL); 1345 1346 /* 1347 ** Writing a zero to STAT_CTL.rf (bit 0) will clear reset signal 1348 ** if it's not already set. If we just cleared the PCI Bus Reset 1349 ** signal, wait a bit for the PCI devices to recover and setup. 1350 */ 1351 if (bus_reset) 1352 mdelay(pci_post_reset_delay); 1353 1354 if (0 == READ_REG32(d->hba.base_addr + LBA_ARB_MASK)) { 1355 /* 1356 ** PDC_PAT_BUG: PDC rev 40.48 on L2000. 1357 ** B2000/C3600/J6000 also have this problem? 1358 ** 1359 ** Elroys with hot pluggable slots don't get configured 1360 ** correctly if the slot is empty. ARB_MASK is set to 0 1361 ** and we can't master transactions on the bus if it's 1362 ** not at least one. 0x3 enables elroy and first slot. 1363 */ 1364 printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n"); 1365 WRITE_REG32(0x3, d->hba.base_addr + LBA_ARB_MASK); 1366 } 1367 1368 /* 1369 ** FIXME: Hint registers are programmed with default hint 1370 ** values by firmware. Hints should be sane even if we 1371 ** can't reprogram them the way drivers want. 1372 */ 1373 return 0; 1374 } 1375 1376 /* 1377 * Unfortunately, when firmware numbers busses, it doesn't take into account 1378 * Cardbus bridges. So we have to renumber the busses to suit ourselves. 1379 * Elroy/Mercury don't actually know what bus number they're attached to; 1380 * we use bus 0 to indicate the directly attached bus and any other bus 1381 * number will be taken care of by the PCI-PCI bridge. 1382 */ 1383 static unsigned int lba_next_bus = 0; 1384 1385 /* 1386 * Determine if lba should claim this chip (return 0) or not (return 1). 1387 * If so, initialize the chip and tell other partners in crime they 1388 * have work to do. 1389 */ 1390 static int __init 1391 lba_driver_probe(struct parisc_device *dev) 1392 { 1393 struct lba_device *lba_dev; 1394 struct pci_bus *lba_bus; 1395 struct pci_ops *cfg_ops; 1396 u32 func_class; 1397 void *tmp_obj; 1398 char *version; 1399 void __iomem *addr = ioremap_nocache(dev->hpa.start, 4096); 1400 1401 /* Read HW Rev First */ 1402 func_class = READ_REG32(addr + LBA_FCLASS); 1403 1404 if (IS_ELROY(dev)) { 1405 func_class &= 0xf; 1406 switch (func_class) { 1407 case 0: version = "TR1.0"; break; 1408 case 1: version = "TR2.0"; break; 1409 case 2: version = "TR2.1"; break; 1410 case 3: version = "TR2.2"; break; 1411 case 4: version = "TR3.0"; break; 1412 case 5: version = "TR4.0"; break; 1413 default: version = "TR4+"; 1414 } 1415 1416 printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n", 1417 version, func_class & 0xf, (long)dev->hpa.start); 1418 1419 if (func_class < 2) { 1420 printk(KERN_WARNING "Can't support LBA older than " 1421 "TR2.1 - continuing under adversity.\n"); 1422 } 1423 1424 #if 0 1425 /* Elroy TR4.0 should work with simple algorithm. 1426 But it doesn't. Still missing something. *sigh* 1427 */ 1428 if (func_class > 4) { 1429 cfg_ops = &mercury_cfg_ops; 1430 } else 1431 #endif 1432 { 1433 cfg_ops = &elroy_cfg_ops; 1434 } 1435 1436 } else if (IS_MERCURY(dev) || IS_QUICKSILVER(dev)) { 1437 int major, minor; 1438 1439 func_class &= 0xff; 1440 major = func_class >> 4, minor = func_class & 0xf; 1441 1442 /* We could use one printk for both Elroy and Mercury, 1443 * but for the mask for func_class. 1444 */ 1445 printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n", 1446 IS_MERCURY(dev) ? "Mercury" : "Quicksilver", major, 1447 minor, func_class, (long)dev->hpa.start); 1448 1449 cfg_ops = &mercury_cfg_ops; 1450 } else { 1451 printk(KERN_ERR "Unknown LBA found at 0x%lx\n", 1452 (long)dev->hpa.start); 1453 return -ENODEV; 1454 } 1455 1456 /* Tell I/O SAPIC driver we have a IRQ handler/region. */ 1457 tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE); 1458 1459 /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't 1460 ** have an IRT entry will get NULL back from iosapic code. 1461 */ 1462 1463 lba_dev = kzalloc(sizeof(struct lba_device), GFP_KERNEL); 1464 if (!lba_dev) { 1465 printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n"); 1466 return(1); 1467 } 1468 1469 1470 /* ---------- First : initialize data we already have --------- */ 1471 1472 lba_dev->hw_rev = func_class; 1473 lba_dev->hba.base_addr = addr; 1474 lba_dev->hba.dev = dev; 1475 lba_dev->iosapic_obj = tmp_obj; /* save interrupt handle */ 1476 lba_dev->hba.iommu = sba_get_iommu(dev); /* get iommu data */ 1477 parisc_set_drvdata(dev, lba_dev); 1478 1479 /* ------------ Second : initialize common stuff ---------- */ 1480 pci_bios = &lba_bios_ops; 1481 pcibios_register_hba(HBA_DATA(lba_dev)); 1482 spin_lock_init(&lba_dev->lba_lock); 1483 1484 if (lba_hw_init(lba_dev)) 1485 return(1); 1486 1487 /* ---------- Third : setup I/O Port and MMIO resources --------- */ 1488 1489 if (is_pdc_pat()) { 1490 /* PDC PAT firmware uses PIOP region of GMMIO space. */ 1491 pci_port = &lba_pat_port_ops; 1492 /* Go ask PDC PAT what resources this LBA has */ 1493 lba_pat_resources(dev, lba_dev); 1494 } else { 1495 if (!astro_iop_base) { 1496 /* Sprockets PDC uses NPIOP region */ 1497 astro_iop_base = ioremap_nocache(LBA_PORT_BASE, 64 * 1024); 1498 pci_port = &lba_astro_port_ops; 1499 } 1500 1501 /* Poke the chip a bit for /proc output */ 1502 lba_legacy_resources(dev, lba_dev); 1503 } 1504 1505 if (lba_dev->hba.bus_num.start < lba_next_bus) 1506 lba_dev->hba.bus_num.start = lba_next_bus; 1507 1508 dev->dev.platform_data = lba_dev; 1509 lba_bus = lba_dev->hba.hba_bus = 1510 pci_scan_bus_parented(&dev->dev, lba_dev->hba.bus_num.start, 1511 cfg_ops, NULL); 1512 if (lba_bus) { 1513 lba_next_bus = lba_bus->subordinate + 1; 1514 pci_bus_add_devices(lba_bus); 1515 } 1516 1517 /* This is in lieu of calling pci_assign_unassigned_resources() */ 1518 if (is_pdc_pat()) { 1519 /* assign resources to un-initialized devices */ 1520 1521 DBG_PAT("LBA pci_bus_size_bridges()\n"); 1522 pci_bus_size_bridges(lba_bus); 1523 1524 DBG_PAT("LBA pci_bus_assign_resources()\n"); 1525 pci_bus_assign_resources(lba_bus); 1526 1527 #ifdef DEBUG_LBA_PAT 1528 DBG_PAT("\nLBA PIOP resource tree\n"); 1529 lba_dump_res(&lba_dev->hba.io_space, 2); 1530 DBG_PAT("\nLBA LMMIO resource tree\n"); 1531 lba_dump_res(&lba_dev->hba.lmmio_space, 2); 1532 #endif 1533 } 1534 pci_enable_bridges(lba_bus); 1535 1536 1537 /* 1538 ** Once PCI register ops has walked the bus, access to config 1539 ** space is restricted. Avoids master aborts on config cycles. 1540 ** Early LBA revs go fatal on *any* master abort. 1541 */ 1542 if (cfg_ops == &elroy_cfg_ops) { 1543 lba_dev->flags |= LBA_FLAG_SKIP_PROBE; 1544 } 1545 1546 /* Whew! Finally done! Tell services we got this one covered. */ 1547 return 0; 1548 } 1549 1550 static struct parisc_device_id lba_tbl[] = { 1551 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, ELROY_HVERS, 0xa }, 1552 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, MERCURY_HVERS, 0xa }, 1553 { HPHW_BRIDGE, HVERSION_REV_ANY_ID, QUICKSILVER_HVERS, 0xa }, 1554 { 0, } 1555 }; 1556 1557 static struct parisc_driver lba_driver = { 1558 .name = MODULE_NAME, 1559 .id_table = lba_tbl, 1560 .probe = lba_driver_probe, 1561 }; 1562 1563 /* 1564 ** One time initialization to let the world know the LBA was found. 1565 ** Must be called exactly once before pci_init(). 1566 */ 1567 void __init lba_init(void) 1568 { 1569 register_parisc_driver(&lba_driver); 1570 } 1571 1572 /* 1573 ** Initialize the IBASE/IMASK registers for LBA (Elroy). 1574 ** Only called from sba_iommu.c in order to route ranges (MMIO vs DMA). 1575 ** sba_iommu is responsible for locking (none needed at init time). 1576 */ 1577 void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask) 1578 { 1579 void __iomem * base_addr = ioremap_nocache(lba->hpa.start, 4096); 1580 1581 imask <<= 2; /* adjust for hints - 2 more bits */ 1582 1583 /* Make sure we aren't trying to set bits that aren't writeable. */ 1584 WARN_ON((ibase & 0x001fffff) != 0); 1585 WARN_ON((imask & 0x001fffff) != 0); 1586 1587 DBG("%s() ibase 0x%x imask 0x%x\n", __func__, ibase, imask); 1588 WRITE_REG32( imask, base_addr + LBA_IMASK); 1589 WRITE_REG32( ibase, base_addr + LBA_IBASE); 1590 iounmap(base_addr); 1591 } 1592 1593