1 /* 2 * eisa.c - provide support for EISA adapters in PA-RISC machines 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * as published by the Free Software Foundation; either version 7 * 2 of the License, or (at your option) any later version. 8 * 9 * Copyright (c) 2001 Matthew Wilcox for Hewlett Packard 10 * Copyright (c) 2001 Daniel Engstrom <5116@telia.com> 11 * 12 * There are two distinct EISA adapters. Mongoose is found in machines 13 * before the 712; then the Wax ASIC is used. To complicate matters, the 14 * Wax ASIC also includes a PS/2 and RS-232 controller, but those are 15 * dealt with elsewhere; this file is concerned only with the EISA portions 16 * of Wax. 17 * 18 * 19 * HINT: 20 * ----- 21 * To allow an ISA card to work properly in the EISA slot you need to 22 * set an edge trigger level. This may be done on the palo command line 23 * by adding the kernel parameter "eisa_irq_edge=n,n2,[...]]", with 24 * n and n2 as the irq levels you want to use. 25 * 26 * Example: "eisa_irq_edge=10,11" allows ISA cards to operate at 27 * irq levels 10 and 11. 28 */ 29 30 #include <linux/init.h> 31 #include <linux/ioport.h> 32 #include <linux/interrupt.h> 33 #include <linux/kernel.h> 34 #include <linux/module.h> 35 #include <linux/pci.h> 36 #include <linux/spinlock.h> 37 #include <linux/eisa.h> 38 39 #include <asm/byteorder.h> 40 #include <asm/io.h> 41 #include <asm/hardware.h> 42 #include <asm/processor.h> 43 #include <asm/parisc-device.h> 44 #include <asm/delay.h> 45 #include <asm/eisa_bus.h> 46 #include <asm/eisa_eeprom.h> 47 48 #if 0 49 #define EISA_DBG(msg, arg... ) printk(KERN_DEBUG "eisa: " msg , ## arg ) 50 #else 51 #define EISA_DBG(msg, arg... ) 52 #endif 53 54 #define SNAKES_EEPROM_BASE_ADDR 0xF0810400 55 #define MIRAGE_EEPROM_BASE_ADDR 0xF00C0400 56 57 static DEFINE_SPINLOCK(eisa_irq_lock); 58 59 void __iomem *eisa_eeprom_addr __read_mostly; 60 61 /* We can only have one EISA adapter in the system because neither 62 * implementation can be flexed. 63 */ 64 static struct eisa_ba { 65 struct pci_hba_data hba; 66 unsigned long eeprom_addr; 67 struct eisa_root_device root; 68 } eisa_dev; 69 70 /* Port ops */ 71 72 static inline unsigned long eisa_permute(unsigned short port) 73 { 74 if (port & 0x300) { 75 return 0xfc000000 | ((port & 0xfc00) >> 6) 76 | ((port & 0x3f8) << 9) | (port & 7); 77 } else { 78 return 0xfc000000 | port; 79 } 80 } 81 82 unsigned char eisa_in8(unsigned short port) 83 { 84 if (EISA_bus) 85 return gsc_readb(eisa_permute(port)); 86 return 0xff; 87 } 88 89 unsigned short eisa_in16(unsigned short port) 90 { 91 if (EISA_bus) 92 return le16_to_cpu(gsc_readw(eisa_permute(port))); 93 return 0xffff; 94 } 95 96 unsigned int eisa_in32(unsigned short port) 97 { 98 if (EISA_bus) 99 return le32_to_cpu(gsc_readl(eisa_permute(port))); 100 return 0xffffffff; 101 } 102 103 void eisa_out8(unsigned char data, unsigned short port) 104 { 105 if (EISA_bus) 106 gsc_writeb(data, eisa_permute(port)); 107 } 108 109 void eisa_out16(unsigned short data, unsigned short port) 110 { 111 if (EISA_bus) 112 gsc_writew(cpu_to_le16(data), eisa_permute(port)); 113 } 114 115 void eisa_out32(unsigned int data, unsigned short port) 116 { 117 if (EISA_bus) 118 gsc_writel(cpu_to_le32(data), eisa_permute(port)); 119 } 120 121 #ifndef CONFIG_PCI 122 /* We call these directly without PCI. See asm/io.h. */ 123 EXPORT_SYMBOL(eisa_in8); 124 EXPORT_SYMBOL(eisa_in16); 125 EXPORT_SYMBOL(eisa_in32); 126 EXPORT_SYMBOL(eisa_out8); 127 EXPORT_SYMBOL(eisa_out16); 128 EXPORT_SYMBOL(eisa_out32); 129 #endif 130 131 /* Interrupt handling */ 132 133 /* cached interrupt mask registers */ 134 static int master_mask; 135 static int slave_mask; 136 137 /* the trig level can be set with the 138 * eisa_irq_edge=n,n,n commandline parameter 139 * We should really read this from the EEPROM 140 * in the furure. 141 */ 142 /* irq 13,8,2,1,0 must be edge */ 143 static unsigned int eisa_irq_level __read_mostly; /* default to edge triggered */ 144 145 146 /* called by free irq */ 147 static void eisa_disable_irq(unsigned int irq) 148 { 149 unsigned long flags; 150 151 EISA_DBG("disable irq %d\n", irq); 152 /* just mask for now */ 153 spin_lock_irqsave(&eisa_irq_lock, flags); 154 if (irq & 8) { 155 slave_mask |= (1 << (irq&7)); 156 eisa_out8(slave_mask, 0xa1); 157 } else { 158 master_mask |= (1 << (irq&7)); 159 eisa_out8(master_mask, 0x21); 160 } 161 spin_unlock_irqrestore(&eisa_irq_lock, flags); 162 EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); 163 EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); 164 } 165 166 /* called by request irq */ 167 static void eisa_enable_irq(unsigned int irq) 168 { 169 unsigned long flags; 170 EISA_DBG("enable irq %d\n", irq); 171 172 spin_lock_irqsave(&eisa_irq_lock, flags); 173 if (irq & 8) { 174 slave_mask &= ~(1 << (irq&7)); 175 eisa_out8(slave_mask, 0xa1); 176 } else { 177 master_mask &= ~(1 << (irq&7)); 178 eisa_out8(master_mask, 0x21); 179 } 180 spin_unlock_irqrestore(&eisa_irq_lock, flags); 181 EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); 182 EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); 183 } 184 185 static unsigned int eisa_startup_irq(unsigned int irq) 186 { 187 eisa_enable_irq(irq); 188 return 0; 189 } 190 191 static struct irq_chip eisa_interrupt_type = { 192 .name = "EISA", 193 .startup = eisa_startup_irq, 194 .shutdown = eisa_disable_irq, 195 .enable = eisa_enable_irq, 196 .disable = eisa_disable_irq, 197 .ack = no_ack_irq, 198 .end = no_end_irq, 199 }; 200 201 static irqreturn_t eisa_irq(int wax_irq, void *intr_dev) 202 { 203 int irq = gsc_readb(0xfc01f000); /* EISA supports 16 irqs */ 204 unsigned long flags; 205 206 spin_lock_irqsave(&eisa_irq_lock, flags); 207 /* read IRR command */ 208 eisa_out8(0x0a, 0x20); 209 eisa_out8(0x0a, 0xa0); 210 211 EISA_DBG("irq IAR %02x 8259-1 irr %02x 8259-2 irr %02x\n", 212 irq, eisa_in8(0x20), eisa_in8(0xa0)); 213 214 /* read ISR command */ 215 eisa_out8(0x0a, 0x20); 216 eisa_out8(0x0a, 0xa0); 217 EISA_DBG("irq 8259-1 isr %02x imr %02x 8259-2 isr %02x imr %02x\n", 218 eisa_in8(0x20), eisa_in8(0x21), eisa_in8(0xa0), eisa_in8(0xa1)); 219 220 irq &= 0xf; 221 222 /* mask irq and write eoi */ 223 if (irq & 8) { 224 slave_mask |= (1 << (irq&7)); 225 eisa_out8(slave_mask, 0xa1); 226 eisa_out8(0x60 | (irq&7),0xa0);/* 'Specific EOI' to slave */ 227 eisa_out8(0x62,0x20); /* 'Specific EOI' to master-IRQ2 */ 228 229 } else { 230 master_mask |= (1 << (irq&7)); 231 eisa_out8(master_mask, 0x21); 232 eisa_out8(0x60|irq,0x20); /* 'Specific EOI' to master */ 233 } 234 spin_unlock_irqrestore(&eisa_irq_lock, flags); 235 236 __do_IRQ(irq); 237 238 spin_lock_irqsave(&eisa_irq_lock, flags); 239 /* unmask */ 240 if (irq & 8) { 241 slave_mask &= ~(1 << (irq&7)); 242 eisa_out8(slave_mask, 0xa1); 243 } else { 244 master_mask &= ~(1 << (irq&7)); 245 eisa_out8(master_mask, 0x21); 246 } 247 spin_unlock_irqrestore(&eisa_irq_lock, flags); 248 return IRQ_HANDLED; 249 } 250 251 static irqreturn_t dummy_irq2_handler(int _, void *dev) 252 { 253 printk(KERN_ALERT "eisa: uhh, irq2?\n"); 254 return IRQ_HANDLED; 255 } 256 257 static struct irqaction irq2_action = { 258 .handler = dummy_irq2_handler, 259 .name = "cascade", 260 }; 261 262 static void init_eisa_pic(void) 263 { 264 unsigned long flags; 265 266 spin_lock_irqsave(&eisa_irq_lock, flags); 267 268 eisa_out8(0xff, 0x21); /* mask during init */ 269 eisa_out8(0xff, 0xa1); /* mask during init */ 270 271 /* master pic */ 272 eisa_out8(0x11,0x20); /* ICW1 */ 273 eisa_out8(0x00,0x21); /* ICW2 */ 274 eisa_out8(0x04,0x21); /* ICW3 */ 275 eisa_out8(0x01,0x21); /* ICW4 */ 276 eisa_out8(0x40,0x20); /* OCW2 */ 277 278 /* slave pic */ 279 eisa_out8(0x11,0xa0); /* ICW1 */ 280 eisa_out8(0x08,0xa1); /* ICW2 */ 281 eisa_out8(0x02,0xa1); /* ICW3 */ 282 eisa_out8(0x01,0xa1); /* ICW4 */ 283 eisa_out8(0x40,0xa0); /* OCW2 */ 284 285 udelay(100); 286 287 slave_mask = 0xff; 288 master_mask = 0xfb; 289 eisa_out8(slave_mask, 0xa1); /* OCW1 */ 290 eisa_out8(master_mask, 0x21); /* OCW1 */ 291 292 /* setup trig level */ 293 EISA_DBG("EISA edge/level %04x\n", eisa_irq_level); 294 295 eisa_out8(eisa_irq_level&0xff, 0x4d0); /* Set all irq's to edge */ 296 eisa_out8((eisa_irq_level >> 8) & 0xff, 0x4d1); 297 298 EISA_DBG("pic0 mask %02x\n", eisa_in8(0x21)); 299 EISA_DBG("pic1 mask %02x\n", eisa_in8(0xa1)); 300 EISA_DBG("pic0 edge/level %02x\n", eisa_in8(0x4d0)); 301 EISA_DBG("pic1 edge/level %02x\n", eisa_in8(0x4d1)); 302 303 spin_unlock_irqrestore(&eisa_irq_lock, flags); 304 } 305 306 /* Device initialisation */ 307 308 #define is_mongoose(dev) (dev->id.sversion == 0x00076) 309 310 static int __init eisa_probe(struct parisc_device *dev) 311 { 312 int i, result; 313 314 char *name = is_mongoose(dev) ? "Mongoose" : "Wax"; 315 316 printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", 317 name, (unsigned long)dev->hpa.start); 318 319 eisa_dev.hba.dev = dev; 320 eisa_dev.hba.iommu = ccio_get_iommu(dev); 321 322 eisa_dev.hba.lmmio_space.name = "EISA"; 323 eisa_dev.hba.lmmio_space.start = F_EXTEND(0xfc000000); 324 eisa_dev.hba.lmmio_space.end = F_EXTEND(0xffbfffff); 325 eisa_dev.hba.lmmio_space.flags = IORESOURCE_MEM; 326 result = ccio_request_resource(dev, &eisa_dev.hba.lmmio_space); 327 if (result < 0) { 328 printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n"); 329 return result; 330 } 331 eisa_dev.hba.io_space.name = "EISA"; 332 eisa_dev.hba.io_space.start = 0; 333 eisa_dev.hba.io_space.end = 0xffff; 334 eisa_dev.hba.lmmio_space.flags = IORESOURCE_IO; 335 result = request_resource(&ioport_resource, &eisa_dev.hba.io_space); 336 if (result < 0) { 337 printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n"); 338 return result; 339 } 340 pcibios_register_hba(&eisa_dev.hba); 341 342 result = request_irq(dev->irq, eisa_irq, IRQF_SHARED, "EISA", &eisa_dev); 343 if (result) { 344 printk(KERN_ERR "EISA: request_irq failed!\n"); 345 return result; 346 } 347 348 /* Reserve IRQ2 */ 349 irq_to_desc(2)->action = &irq2_action; 350 351 for (i = 0; i < 16; i++) { 352 irq_to_desc(i)->chip = &eisa_interrupt_type; 353 } 354 355 EISA_bus = 1; 356 357 if (dev->num_addrs) { 358 /* newer firmware hand out the eeprom address */ 359 eisa_dev.eeprom_addr = dev->addr[0]; 360 } else { 361 /* old firmware, need to figure out the box */ 362 if (is_mongoose(dev)) { 363 eisa_dev.eeprom_addr = SNAKES_EEPROM_BASE_ADDR; 364 } else { 365 eisa_dev.eeprom_addr = MIRAGE_EEPROM_BASE_ADDR; 366 } 367 } 368 eisa_eeprom_addr = ioremap_nocache(eisa_dev.eeprom_addr, HPEE_MAX_LENGTH); 369 result = eisa_enumerator(eisa_dev.eeprom_addr, &eisa_dev.hba.io_space, 370 &eisa_dev.hba.lmmio_space); 371 init_eisa_pic(); 372 373 if (result >= 0) { 374 /* FIXME : Don't enumerate the bus twice. */ 375 eisa_dev.root.dev = &dev->dev; 376 dev_set_drvdata(&dev->dev, &eisa_dev.root); 377 eisa_dev.root.bus_base_addr = 0; 378 eisa_dev.root.res = &eisa_dev.hba.io_space; 379 eisa_dev.root.slots = result; 380 eisa_dev.root.dma_mask = 0xffffffff; /* wild guess */ 381 if (eisa_root_register (&eisa_dev.root)) { 382 printk(KERN_ERR "EISA: Failed to register EISA root\n"); 383 return -1; 384 } 385 } 386 387 return 0; 388 } 389 390 static const struct parisc_device_id eisa_tbl[] = { 391 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00076 }, /* Mongoose */ 392 { HPHW_BA, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00090 }, /* Wax EISA */ 393 { 0, } 394 }; 395 396 MODULE_DEVICE_TABLE(parisc, eisa_tbl); 397 398 static struct parisc_driver eisa_driver = { 399 .name = "eisa_ba", 400 .id_table = eisa_tbl, 401 .probe = eisa_probe, 402 }; 403 404 void __init eisa_init(void) 405 { 406 register_parisc_driver(&eisa_driver); 407 } 408 409 410 static unsigned int eisa_irq_configured; 411 void eisa_make_irq_level(int num) 412 { 413 if (eisa_irq_configured& (1<<num)) { 414 printk(KERN_WARNING 415 "IRQ %d polarity configured twice (last to level)\n", 416 num); 417 } 418 eisa_irq_level |= (1<<num); /* set the corresponding bit */ 419 eisa_irq_configured |= (1<<num); /* set the corresponding bit */ 420 } 421 422 void eisa_make_irq_edge(int num) 423 { 424 if (eisa_irq_configured& (1<<num)) { 425 printk(KERN_WARNING 426 "IRQ %d polarity configured twice (last to edge)\n", 427 num); 428 } 429 eisa_irq_level &= ~(1<<num); /* clear the corresponding bit */ 430 eisa_irq_configured |= (1<<num); /* set the corresponding bit */ 431 } 432 433 static int __init eisa_irq_setup(char *str) 434 { 435 char *cur = str; 436 int val; 437 438 EISA_DBG("IRQ setup\n"); 439 while (cur != NULL) { 440 char *pe; 441 442 val = (int) simple_strtoul(cur, &pe, 0); 443 if (val > 15 || val < 0) { 444 printk(KERN_ERR "eisa: EISA irq value are 0-15\n"); 445 continue; 446 } 447 if (val == 2) { 448 val = 9; 449 } 450 eisa_make_irq_edge(val); /* clear the corresponding bit */ 451 EISA_DBG("setting IRQ %d to edge-triggered mode\n", val); 452 453 if ((cur = strchr(cur, ','))) { 454 cur++; 455 } else { 456 break; 457 } 458 } 459 return 1; 460 } 461 462 __setup("eisa_irq_edge=", eisa_irq_setup); 463 464