1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * STM32 Factory-programmed memory read access driver 4 * 5 * Copyright (C) 2017, STMicroelectronics - All Rights Reserved 6 * Author: Fabrice Gasnier <fabrice.gasnier@st.com> for STMicroelectronics. 7 */ 8 9 #include <linux/arm-smccc.h> 10 #include <linux/io.h> 11 #include <linux/module.h> 12 #include <linux/nvmem-provider.h> 13 #include <linux/of_device.h> 14 #include <linux/tee_drv.h> 15 16 #include "stm32-bsec-optee-ta.h" 17 18 /* BSEC secure service access from non-secure */ 19 #define STM32_SMC_BSEC 0x82001003 20 #define STM32_SMC_READ_SHADOW 0x01 21 #define STM32_SMC_PROG_OTP 0x02 22 #define STM32_SMC_WRITE_SHADOW 0x03 23 #define STM32_SMC_READ_OTP 0x04 24 25 /* shadow registers offset */ 26 #define STM32MP15_BSEC_DATA0 0x200 27 28 struct stm32_romem_cfg { 29 int size; 30 u8 lower; 31 bool ta; 32 }; 33 34 struct stm32_romem_priv { 35 void __iomem *base; 36 struct nvmem_config cfg; 37 u8 lower; 38 struct tee_context *ctx; 39 }; 40 41 static int stm32_romem_read(void *context, unsigned int offset, void *buf, 42 size_t bytes) 43 { 44 struct stm32_romem_priv *priv = context; 45 u8 *buf8 = buf; 46 int i; 47 48 for (i = offset; i < offset + bytes; i++) 49 *buf8++ = readb_relaxed(priv->base + i); 50 51 return 0; 52 } 53 54 static int stm32_bsec_smc(u8 op, u32 otp, u32 data, u32 *result) 55 { 56 #if IS_ENABLED(CONFIG_HAVE_ARM_SMCCC) 57 struct arm_smccc_res res; 58 59 arm_smccc_smc(STM32_SMC_BSEC, op, otp, data, 0, 0, 0, 0, &res); 60 if (res.a0) 61 return -EIO; 62 63 if (result) 64 *result = (u32)res.a1; 65 66 return 0; 67 #else 68 return -ENXIO; 69 #endif 70 } 71 72 static int stm32_bsec_read(void *context, unsigned int offset, void *buf, 73 size_t bytes) 74 { 75 struct stm32_romem_priv *priv = context; 76 struct device *dev = priv->cfg.dev; 77 u32 roffset, rbytes, val; 78 u8 *buf8 = buf, *val8 = (u8 *)&val; 79 int i, j = 0, ret, skip_bytes, size; 80 81 /* Round unaligned access to 32-bits */ 82 roffset = rounddown(offset, 4); 83 skip_bytes = offset & 0x3; 84 rbytes = roundup(bytes + skip_bytes, 4); 85 86 if (roffset + rbytes > priv->cfg.size) 87 return -EINVAL; 88 89 for (i = roffset; (i < roffset + rbytes); i += 4) { 90 u32 otp = i >> 2; 91 92 if (otp < priv->lower) { 93 /* read lower data from shadow registers */ 94 val = readl_relaxed( 95 priv->base + STM32MP15_BSEC_DATA0 + i); 96 } else { 97 ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, otp, 0, 98 &val); 99 if (ret) { 100 dev_err(dev, "Can't read data%d (%d)\n", otp, 101 ret); 102 return ret; 103 } 104 } 105 /* skip first bytes in case of unaligned read */ 106 if (skip_bytes) 107 size = min(bytes, (size_t)(4 - skip_bytes)); 108 else 109 size = min(bytes, (size_t)4); 110 memcpy(&buf8[j], &val8[skip_bytes], size); 111 bytes -= size; 112 j += size; 113 skip_bytes = 0; 114 } 115 116 return 0; 117 } 118 119 static int stm32_bsec_write(void *context, unsigned int offset, void *buf, 120 size_t bytes) 121 { 122 struct stm32_romem_priv *priv = context; 123 struct device *dev = priv->cfg.dev; 124 u32 *buf32 = buf; 125 int ret, i; 126 127 /* Allow only writing complete 32-bits aligned words */ 128 if ((bytes % 4) || (offset % 4)) 129 return -EINVAL; 130 131 for (i = offset; i < offset + bytes; i += 4) { 132 ret = stm32_bsec_smc(STM32_SMC_PROG_OTP, i >> 2, *buf32++, 133 NULL); 134 if (ret) { 135 dev_err(dev, "Can't write data%d (%d)\n", i >> 2, ret); 136 return ret; 137 } 138 } 139 140 if (offset + bytes >= priv->lower * 4) 141 dev_warn(dev, "Update of upper OTPs with ECC protection (word programming, only once)\n"); 142 143 return 0; 144 } 145 146 static int stm32_bsec_pta_read(void *context, unsigned int offset, void *buf, 147 size_t bytes) 148 { 149 struct stm32_romem_priv *priv = context; 150 151 return stm32_bsec_optee_ta_read(priv->ctx, offset, buf, bytes); 152 } 153 154 static int stm32_bsec_pta_write(void *context, unsigned int offset, void *buf, 155 size_t bytes) 156 { 157 struct stm32_romem_priv *priv = context; 158 159 return stm32_bsec_optee_ta_write(priv->ctx, priv->lower, offset, buf, bytes); 160 } 161 162 static bool stm32_bsec_smc_check(void) 163 { 164 u32 val; 165 int ret; 166 167 /* check that the OP-TEE support the BSEC SMC (legacy mode) */ 168 ret = stm32_bsec_smc(STM32_SMC_READ_SHADOW, 0, 0, &val); 169 170 return !ret; 171 } 172 173 static bool optee_presence_check(void) 174 { 175 struct device_node *np; 176 bool tee_detected = false; 177 178 /* check that the OP-TEE node is present and available. */ 179 np = of_find_compatible_node(NULL, NULL, "linaro,optee-tz"); 180 if (np && of_device_is_available(np)) 181 tee_detected = true; 182 of_node_put(np); 183 184 return tee_detected; 185 } 186 187 static int stm32_romem_probe(struct platform_device *pdev) 188 { 189 const struct stm32_romem_cfg *cfg; 190 struct device *dev = &pdev->dev; 191 struct stm32_romem_priv *priv; 192 struct resource *res; 193 int rc; 194 195 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 196 if (!priv) 197 return -ENOMEM; 198 199 priv->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); 200 if (IS_ERR(priv->base)) 201 return PTR_ERR(priv->base); 202 203 priv->cfg.name = "stm32-romem"; 204 priv->cfg.word_size = 1; 205 priv->cfg.stride = 1; 206 priv->cfg.dev = dev; 207 priv->cfg.priv = priv; 208 priv->cfg.owner = THIS_MODULE; 209 priv->cfg.type = NVMEM_TYPE_OTP; 210 priv->cfg.add_legacy_fixed_of_cells = true; 211 212 priv->lower = 0; 213 214 cfg = (const struct stm32_romem_cfg *) 215 of_match_device(dev->driver->of_match_table, dev)->data; 216 if (!cfg) { 217 priv->cfg.read_only = true; 218 priv->cfg.size = resource_size(res); 219 priv->cfg.reg_read = stm32_romem_read; 220 } else { 221 priv->cfg.size = cfg->size; 222 priv->lower = cfg->lower; 223 if (cfg->ta || optee_presence_check()) { 224 rc = stm32_bsec_optee_ta_open(&priv->ctx); 225 if (rc) { 226 /* wait for OP-TEE client driver to be up and ready */ 227 if (rc == -EPROBE_DEFER) 228 return -EPROBE_DEFER; 229 /* BSEC PTA is required or SMC not supported */ 230 if (cfg->ta || !stm32_bsec_smc_check()) 231 return rc; 232 } 233 } 234 if (priv->ctx) { 235 rc = devm_add_action_or_reset(dev, stm32_bsec_optee_ta_close, priv->ctx); 236 if (rc) { 237 dev_err(dev, "devm_add_action_or_reset() failed (%d)\n", rc); 238 return rc; 239 } 240 priv->cfg.reg_read = stm32_bsec_pta_read; 241 priv->cfg.reg_write = stm32_bsec_pta_write; 242 } else { 243 priv->cfg.reg_read = stm32_bsec_read; 244 priv->cfg.reg_write = stm32_bsec_write; 245 } 246 } 247 248 return PTR_ERR_OR_ZERO(devm_nvmem_register(dev, &priv->cfg)); 249 } 250 251 /* 252 * STM32MP15/13 BSEC OTP regions: 4096 OTP bits (with 3072 effective bits) 253 * => 96 x 32-bits data words 254 * - Lower: 1K bits, 2:1 redundancy, incremental bit programming 255 * => 32 (x 32-bits) lower shadow registers = words 0 to 31 256 * - Upper: 2K bits, ECC protection, word programming only 257 * => 64 (x 32-bits) = words 32 to 95 258 */ 259 static const struct stm32_romem_cfg stm32mp15_bsec_cfg = { 260 .size = 384, 261 .lower = 32, 262 .ta = false, 263 }; 264 265 static const struct stm32_romem_cfg stm32mp13_bsec_cfg = { 266 .size = 384, 267 .lower = 32, 268 .ta = true, 269 }; 270 271 static const struct of_device_id stm32_romem_of_match[] __maybe_unused = { 272 { .compatible = "st,stm32f4-otp", }, { 273 .compatible = "st,stm32mp15-bsec", 274 .data = (void *)&stm32mp15_bsec_cfg, 275 }, { 276 .compatible = "st,stm32mp13-bsec", 277 .data = (void *)&stm32mp13_bsec_cfg, 278 }, 279 { /* sentinel */ }, 280 }; 281 MODULE_DEVICE_TABLE(of, stm32_romem_of_match); 282 283 static struct platform_driver stm32_romem_driver = { 284 .probe = stm32_romem_probe, 285 .driver = { 286 .name = "stm32-romem", 287 .of_match_table = of_match_ptr(stm32_romem_of_match), 288 }, 289 }; 290 module_platform_driver(stm32_romem_driver); 291 292 MODULE_AUTHOR("Fabrice Gasnier <fabrice.gasnier@st.com>"); 293 MODULE_DESCRIPTION("STMicroelectronics STM32 RO-MEM"); 294 MODULE_ALIAS("platform:nvmem-stm32-romem"); 295 MODULE_LICENSE("GPL v2"); 296