1 // SPDX-License-Identifier: GPL-2.0-only 2 // Copyright (C) 2016 Broadcom 3 4 #include <linux/acpi.h> 5 #include <linux/delay.h> 6 #include <linux/device.h> 7 #include <linux/io.h> 8 #include <linux/module.h> 9 #include <linux/nvmem-provider.h> 10 #include <linux/of.h> 11 #include <linux/of_device.h> 12 #include <linux/platform_device.h> 13 14 /* 15 * # of tries for OTP Status. The time to execute a command varies. The slowest 16 * commands are writes which also vary based on the # of bits turned on. Writing 17 * 0xffffffff takes ~3800 us. 18 */ 19 #define OTPC_RETRIES 5000 20 21 /* Sequence to enable OTP program */ 22 #define OTPC_PROG_EN_SEQ { 0xf, 0x4, 0x8, 0xd } 23 24 /* OTPC Commands */ 25 #define OTPC_CMD_READ 0x0 26 #define OTPC_CMD_OTP_PROG_ENABLE 0x2 27 #define OTPC_CMD_OTP_PROG_DISABLE 0x3 28 #define OTPC_CMD_PROGRAM 0x8 29 30 /* OTPC Status Bits */ 31 #define OTPC_STAT_CMD_DONE BIT(1) 32 #define OTPC_STAT_PROG_OK BIT(2) 33 34 /* OTPC register definition */ 35 #define OTPC_MODE_REG_OFFSET 0x0 36 #define OTPC_MODE_REG_OTPC_MODE 0 37 #define OTPC_COMMAND_OFFSET 0x4 38 #define OTPC_COMMAND_COMMAND_WIDTH 6 39 #define OTPC_CMD_START_OFFSET 0x8 40 #define OTPC_CMD_START_START 0 41 #define OTPC_CPU_STATUS_OFFSET 0xc 42 #define OTPC_CPUADDR_REG_OFFSET 0x28 43 #define OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH 16 44 #define OTPC_CPU_WRITE_REG_OFFSET 0x2c 45 46 #define OTPC_CMD_MASK (BIT(OTPC_COMMAND_COMMAND_WIDTH) - 1) 47 #define OTPC_ADDR_MASK (BIT(OTPC_CPUADDR_REG_OTPC_CPU_ADDRESS_WIDTH) - 1) 48 49 50 struct otpc_map { 51 /* in words. */ 52 u32 otpc_row_size; 53 /* 128 bit row / 4 words support. */ 54 u16 data_r_offset[4]; 55 /* 128 bit row / 4 words support. */ 56 u16 data_w_offset[4]; 57 }; 58 59 static struct otpc_map otp_map = { 60 .otpc_row_size = 1, 61 .data_r_offset = {0x10}, 62 .data_w_offset = {0x2c}, 63 }; 64 65 static struct otpc_map otp_map_v2 = { 66 .otpc_row_size = 2, 67 .data_r_offset = {0x10, 0x5c}, 68 .data_w_offset = {0x2c, 0x64}, 69 }; 70 71 struct otpc_priv { 72 struct device *dev; 73 void __iomem *base; 74 const struct otpc_map *map; 75 struct nvmem_config *config; 76 }; 77 78 static inline void set_command(void __iomem *base, u32 command) 79 { 80 writel(command & OTPC_CMD_MASK, base + OTPC_COMMAND_OFFSET); 81 } 82 83 static inline void set_cpu_address(void __iomem *base, u32 addr) 84 { 85 writel(addr & OTPC_ADDR_MASK, base + OTPC_CPUADDR_REG_OFFSET); 86 } 87 88 static inline void set_start_bit(void __iomem *base) 89 { 90 writel(1 << OTPC_CMD_START_START, base + OTPC_CMD_START_OFFSET); 91 } 92 93 static inline void reset_start_bit(void __iomem *base) 94 { 95 writel(0, base + OTPC_CMD_START_OFFSET); 96 } 97 98 static inline void write_cpu_data(void __iomem *base, u32 value) 99 { 100 writel(value, base + OTPC_CPU_WRITE_REG_OFFSET); 101 } 102 103 static int poll_cpu_status(void __iomem *base, u32 value) 104 { 105 u32 status; 106 u32 retries; 107 108 for (retries = 0; retries < OTPC_RETRIES; retries++) { 109 status = readl(base + OTPC_CPU_STATUS_OFFSET); 110 if (status & value) 111 break; 112 udelay(1); 113 } 114 if (retries == OTPC_RETRIES) 115 return -EAGAIN; 116 117 return 0; 118 } 119 120 static int enable_ocotp_program(void __iomem *base) 121 { 122 static const u32 vals[] = OTPC_PROG_EN_SEQ; 123 int i; 124 int ret; 125 126 /* Write the magic sequence to enable programming */ 127 set_command(base, OTPC_CMD_OTP_PROG_ENABLE); 128 for (i = 0; i < ARRAY_SIZE(vals); i++) { 129 write_cpu_data(base, vals[i]); 130 set_start_bit(base); 131 ret = poll_cpu_status(base, OTPC_STAT_CMD_DONE); 132 reset_start_bit(base); 133 if (ret) 134 return ret; 135 } 136 137 return poll_cpu_status(base, OTPC_STAT_PROG_OK); 138 } 139 140 static int disable_ocotp_program(void __iomem *base) 141 { 142 int ret; 143 144 set_command(base, OTPC_CMD_OTP_PROG_DISABLE); 145 set_start_bit(base); 146 ret = poll_cpu_status(base, OTPC_STAT_PROG_OK); 147 reset_start_bit(base); 148 149 return ret; 150 } 151 152 static int bcm_otpc_read(void *context, unsigned int offset, void *val, 153 size_t bytes) 154 { 155 struct otpc_priv *priv = context; 156 u32 *buf = val; 157 u32 bytes_read; 158 u32 address = offset / priv->config->word_size; 159 int i, ret; 160 161 for (bytes_read = 0; bytes_read < bytes;) { 162 set_command(priv->base, OTPC_CMD_READ); 163 set_cpu_address(priv->base, address++); 164 set_start_bit(priv->base); 165 ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE); 166 if (ret) { 167 dev_err(priv->dev, "otp read error: 0x%x", ret); 168 return -EIO; 169 } 170 171 for (i = 0; i < priv->map->otpc_row_size; i++) { 172 *buf++ = readl(priv->base + 173 priv->map->data_r_offset[i]); 174 bytes_read += sizeof(*buf); 175 } 176 177 reset_start_bit(priv->base); 178 } 179 180 return 0; 181 } 182 183 static int bcm_otpc_write(void *context, unsigned int offset, void *val, 184 size_t bytes) 185 { 186 struct otpc_priv *priv = context; 187 u32 *buf = val; 188 u32 bytes_written; 189 u32 address = offset / priv->config->word_size; 190 int i, ret; 191 192 if (offset % priv->config->word_size) 193 return -EINVAL; 194 195 ret = enable_ocotp_program(priv->base); 196 if (ret) 197 return -EIO; 198 199 for (bytes_written = 0; bytes_written < bytes;) { 200 set_command(priv->base, OTPC_CMD_PROGRAM); 201 set_cpu_address(priv->base, address++); 202 for (i = 0; i < priv->map->otpc_row_size; i++) { 203 writel(*buf, priv->base + priv->map->data_w_offset[i]); 204 buf++; 205 bytes_written += sizeof(*buf); 206 } 207 set_start_bit(priv->base); 208 ret = poll_cpu_status(priv->base, OTPC_STAT_CMD_DONE); 209 reset_start_bit(priv->base); 210 if (ret) { 211 dev_err(priv->dev, "otp write error: 0x%x", ret); 212 return -EIO; 213 } 214 } 215 216 disable_ocotp_program(priv->base); 217 218 return 0; 219 } 220 221 static struct nvmem_config bcm_otpc_nvmem_config = { 222 .name = "bcm-ocotp", 223 .read_only = false, 224 .word_size = 4, 225 .stride = 4, 226 .reg_read = bcm_otpc_read, 227 .reg_write = bcm_otpc_write, 228 }; 229 230 static const struct of_device_id bcm_otpc_dt_ids[] = { 231 { .compatible = "brcm,ocotp", .data = &otp_map }, 232 { .compatible = "brcm,ocotp-v2", .data = &otp_map_v2 }, 233 { }, 234 }; 235 MODULE_DEVICE_TABLE(of, bcm_otpc_dt_ids); 236 237 static const struct acpi_device_id bcm_otpc_acpi_ids[] __maybe_unused = { 238 { .id = "BRCM0700", .driver_data = (kernel_ulong_t)&otp_map }, 239 { .id = "BRCM0701", .driver_data = (kernel_ulong_t)&otp_map_v2 }, 240 { /* sentinel */ } 241 }; 242 MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_ids); 243 244 static int bcm_otpc_probe(struct platform_device *pdev) 245 { 246 struct device *dev = &pdev->dev; 247 struct resource *res; 248 struct otpc_priv *priv; 249 struct nvmem_device *nvmem; 250 int err; 251 u32 num_words; 252 253 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 254 if (!priv) 255 return -ENOMEM; 256 257 priv->map = device_get_match_data(dev); 258 if (!priv->map) 259 return -ENODEV; 260 261 /* Get OTP base address register. */ 262 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 263 priv->base = devm_ioremap_resource(dev, res); 264 if (IS_ERR(priv->base)) { 265 dev_err(dev, "unable to map I/O memory\n"); 266 return PTR_ERR(priv->base); 267 } 268 269 /* Enable CPU access to OTPC. */ 270 writel(readl(priv->base + OTPC_MODE_REG_OFFSET) | 271 BIT(OTPC_MODE_REG_OTPC_MODE), 272 priv->base + OTPC_MODE_REG_OFFSET); 273 reset_start_bit(priv->base); 274 275 /* Read size of memory in words. */ 276 err = device_property_read_u32(dev, "brcm,ocotp-size", &num_words); 277 if (err) { 278 dev_err(dev, "size parameter not specified\n"); 279 return -EINVAL; 280 } else if (num_words == 0) { 281 dev_err(dev, "size must be > 0\n"); 282 return -EINVAL; 283 } 284 285 bcm_otpc_nvmem_config.size = 4 * num_words; 286 bcm_otpc_nvmem_config.dev = dev; 287 bcm_otpc_nvmem_config.priv = priv; 288 289 if (priv->map == &otp_map_v2) { 290 bcm_otpc_nvmem_config.word_size = 8; 291 bcm_otpc_nvmem_config.stride = 8; 292 } 293 294 priv->config = &bcm_otpc_nvmem_config; 295 296 nvmem = devm_nvmem_register(dev, &bcm_otpc_nvmem_config); 297 if (IS_ERR(nvmem)) { 298 dev_err(dev, "error registering nvmem config\n"); 299 return PTR_ERR(nvmem); 300 } 301 302 return 0; 303 } 304 305 static struct platform_driver bcm_otpc_driver = { 306 .probe = bcm_otpc_probe, 307 .driver = { 308 .name = "brcm-otpc", 309 .of_match_table = bcm_otpc_dt_ids, 310 .acpi_match_table = ACPI_PTR(bcm_otpc_acpi_ids), 311 }, 312 }; 313 module_platform_driver(bcm_otpc_driver); 314 315 MODULE_DESCRIPTION("Broadcom OTPC driver"); 316 MODULE_LICENSE("GPL v2"); 317