1 /* 2 * This file is provided under a GPLv2 license. When using or 3 * redistributing this file, you may do so under that license. 4 * 5 * GPL LICENSE SUMMARY 6 * 7 * Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved. 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms and conditions of the GNU General Public License, 11 * version 2, as published by the Free Software Foundation. 12 * 13 * This program is distributed in the hope that it will be useful, but 14 * WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General 16 * Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License along 19 * with this program; if not, one can be found http://www.gnu.org/licenses/. 20 * 21 * The full GNU General Public License is included in this distribution in 22 * the file called "COPYING". 23 * 24 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 25 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 26 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 27 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 28 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 29 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 30 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 31 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 32 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 33 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 34 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 35 * 36 * IDT PCIe-switch NTB Linux driver 37 * 38 * Contact Information: 39 * Serge Semin <fancer.lancer@gmail.com>, <Sergey.Semin@t-platforms.ru> 40 */ 41 42 #include <linux/stddef.h> 43 #include <linux/types.h> 44 #include <linux/kernel.h> 45 #include <linux/bitops.h> 46 #include <linux/sizes.h> 47 #include <linux/module.h> 48 #include <linux/moduleparam.h> 49 #include <linux/init.h> 50 #include <linux/interrupt.h> 51 #include <linux/spinlock.h> 52 #include <linux/mutex.h> 53 #include <linux/pci.h> 54 #include <linux/aer.h> 55 #include <linux/slab.h> 56 #include <linux/list.h> 57 #include <linux/debugfs.h> 58 #include <linux/hwmon.h> 59 #include <linux/hwmon-sysfs.h> 60 #include <linux/ntb.h> 61 62 #include "ntb_hw_idt.h" 63 64 #define NTB_NAME "ntb_hw_idt" 65 #define NTB_DESC "IDT PCI-E Non-Transparent Bridge Driver" 66 #define NTB_VER "2.0" 67 #define NTB_IRQNAME "ntb_irq_idt" 68 69 MODULE_DESCRIPTION(NTB_DESC); 70 MODULE_VERSION(NTB_VER); 71 MODULE_LICENSE("GPL v2"); 72 MODULE_AUTHOR("T-platforms"); 73 74 /* 75 * NT Endpoint registers table simplifying a loop access to the functionally 76 * related registers 77 */ 78 static const struct idt_ntb_regs ntdata_tbl = { 79 { {IDT_NT_BARSETUP0, IDT_NT_BARLIMIT0, 80 IDT_NT_BARLTBASE0, IDT_NT_BARUTBASE0}, 81 {IDT_NT_BARSETUP1, IDT_NT_BARLIMIT1, 82 IDT_NT_BARLTBASE1, IDT_NT_BARUTBASE1}, 83 {IDT_NT_BARSETUP2, IDT_NT_BARLIMIT2, 84 IDT_NT_BARLTBASE2, IDT_NT_BARUTBASE2}, 85 {IDT_NT_BARSETUP3, IDT_NT_BARLIMIT3, 86 IDT_NT_BARLTBASE3, IDT_NT_BARUTBASE3}, 87 {IDT_NT_BARSETUP4, IDT_NT_BARLIMIT4, 88 IDT_NT_BARLTBASE4, IDT_NT_BARUTBASE4}, 89 {IDT_NT_BARSETUP5, IDT_NT_BARLIMIT5, 90 IDT_NT_BARLTBASE5, IDT_NT_BARUTBASE5} }, 91 { {IDT_NT_INMSG0, IDT_NT_OUTMSG0, IDT_NT_INMSGSRC0}, 92 {IDT_NT_INMSG1, IDT_NT_OUTMSG1, IDT_NT_INMSGSRC1}, 93 {IDT_NT_INMSG2, IDT_NT_OUTMSG2, IDT_NT_INMSGSRC2}, 94 {IDT_NT_INMSG3, IDT_NT_OUTMSG3, IDT_NT_INMSGSRC3} } 95 }; 96 97 /* 98 * NT Endpoint ports data table with the corresponding pcie command, link 99 * status, control and BAR-related registers 100 */ 101 static const struct idt_ntb_port portdata_tbl[IDT_MAX_NR_PORTS] = { 102 /*0*/ { IDT_SW_NTP0_PCIECMDSTS, IDT_SW_NTP0_PCIELCTLSTS, 103 IDT_SW_NTP0_NTCTL, 104 IDT_SW_SWPORT0CTL, IDT_SW_SWPORT0STS, 105 { {IDT_SW_NTP0_BARSETUP0, IDT_SW_NTP0_BARLIMIT0, 106 IDT_SW_NTP0_BARLTBASE0, IDT_SW_NTP0_BARUTBASE0}, 107 {IDT_SW_NTP0_BARSETUP1, IDT_SW_NTP0_BARLIMIT1, 108 IDT_SW_NTP0_BARLTBASE1, IDT_SW_NTP0_BARUTBASE1}, 109 {IDT_SW_NTP0_BARSETUP2, IDT_SW_NTP0_BARLIMIT2, 110 IDT_SW_NTP0_BARLTBASE2, IDT_SW_NTP0_BARUTBASE2}, 111 {IDT_SW_NTP0_BARSETUP3, IDT_SW_NTP0_BARLIMIT3, 112 IDT_SW_NTP0_BARLTBASE3, IDT_SW_NTP0_BARUTBASE3}, 113 {IDT_SW_NTP0_BARSETUP4, IDT_SW_NTP0_BARLIMIT4, 114 IDT_SW_NTP0_BARLTBASE4, IDT_SW_NTP0_BARUTBASE4}, 115 {IDT_SW_NTP0_BARSETUP5, IDT_SW_NTP0_BARLIMIT5, 116 IDT_SW_NTP0_BARLTBASE5, IDT_SW_NTP0_BARUTBASE5} } }, 117 /*1*/ {0}, 118 /*2*/ { IDT_SW_NTP2_PCIECMDSTS, IDT_SW_NTP2_PCIELCTLSTS, 119 IDT_SW_NTP2_NTCTL, 120 IDT_SW_SWPORT2CTL, IDT_SW_SWPORT2STS, 121 { {IDT_SW_NTP2_BARSETUP0, IDT_SW_NTP2_BARLIMIT0, 122 IDT_SW_NTP2_BARLTBASE0, IDT_SW_NTP2_BARUTBASE0}, 123 {IDT_SW_NTP2_BARSETUP1, IDT_SW_NTP2_BARLIMIT1, 124 IDT_SW_NTP2_BARLTBASE1, IDT_SW_NTP2_BARUTBASE1}, 125 {IDT_SW_NTP2_BARSETUP2, IDT_SW_NTP2_BARLIMIT2, 126 IDT_SW_NTP2_BARLTBASE2, IDT_SW_NTP2_BARUTBASE2}, 127 {IDT_SW_NTP2_BARSETUP3, IDT_SW_NTP2_BARLIMIT3, 128 IDT_SW_NTP2_BARLTBASE3, IDT_SW_NTP2_BARUTBASE3}, 129 {IDT_SW_NTP2_BARSETUP4, IDT_SW_NTP2_BARLIMIT4, 130 IDT_SW_NTP2_BARLTBASE4, IDT_SW_NTP2_BARUTBASE4}, 131 {IDT_SW_NTP2_BARSETUP5, IDT_SW_NTP2_BARLIMIT5, 132 IDT_SW_NTP2_BARLTBASE5, IDT_SW_NTP2_BARUTBASE5} } }, 133 /*3*/ {0}, 134 /*4*/ { IDT_SW_NTP4_PCIECMDSTS, IDT_SW_NTP4_PCIELCTLSTS, 135 IDT_SW_NTP4_NTCTL, 136 IDT_SW_SWPORT4CTL, IDT_SW_SWPORT4STS, 137 { {IDT_SW_NTP4_BARSETUP0, IDT_SW_NTP4_BARLIMIT0, 138 IDT_SW_NTP4_BARLTBASE0, IDT_SW_NTP4_BARUTBASE0}, 139 {IDT_SW_NTP4_BARSETUP1, IDT_SW_NTP4_BARLIMIT1, 140 IDT_SW_NTP4_BARLTBASE1, IDT_SW_NTP4_BARUTBASE1}, 141 {IDT_SW_NTP4_BARSETUP2, IDT_SW_NTP4_BARLIMIT2, 142 IDT_SW_NTP4_BARLTBASE2, IDT_SW_NTP4_BARUTBASE2}, 143 {IDT_SW_NTP4_BARSETUP3, IDT_SW_NTP4_BARLIMIT3, 144 IDT_SW_NTP4_BARLTBASE3, IDT_SW_NTP4_BARUTBASE3}, 145 {IDT_SW_NTP4_BARSETUP4, IDT_SW_NTP4_BARLIMIT4, 146 IDT_SW_NTP4_BARLTBASE4, IDT_SW_NTP4_BARUTBASE4}, 147 {IDT_SW_NTP4_BARSETUP5, IDT_SW_NTP4_BARLIMIT5, 148 IDT_SW_NTP4_BARLTBASE5, IDT_SW_NTP4_BARUTBASE5} } }, 149 /*5*/ {0}, 150 /*6*/ { IDT_SW_NTP6_PCIECMDSTS, IDT_SW_NTP6_PCIELCTLSTS, 151 IDT_SW_NTP6_NTCTL, 152 IDT_SW_SWPORT6CTL, IDT_SW_SWPORT6STS, 153 { {IDT_SW_NTP6_BARSETUP0, IDT_SW_NTP6_BARLIMIT0, 154 IDT_SW_NTP6_BARLTBASE0, IDT_SW_NTP6_BARUTBASE0}, 155 {IDT_SW_NTP6_BARSETUP1, IDT_SW_NTP6_BARLIMIT1, 156 IDT_SW_NTP6_BARLTBASE1, IDT_SW_NTP6_BARUTBASE1}, 157 {IDT_SW_NTP6_BARSETUP2, IDT_SW_NTP6_BARLIMIT2, 158 IDT_SW_NTP6_BARLTBASE2, IDT_SW_NTP6_BARUTBASE2}, 159 {IDT_SW_NTP6_BARSETUP3, IDT_SW_NTP6_BARLIMIT3, 160 IDT_SW_NTP6_BARLTBASE3, IDT_SW_NTP6_BARUTBASE3}, 161 {IDT_SW_NTP6_BARSETUP4, IDT_SW_NTP6_BARLIMIT4, 162 IDT_SW_NTP6_BARLTBASE4, IDT_SW_NTP6_BARUTBASE4}, 163 {IDT_SW_NTP6_BARSETUP5, IDT_SW_NTP6_BARLIMIT5, 164 IDT_SW_NTP6_BARLTBASE5, IDT_SW_NTP6_BARUTBASE5} } }, 165 /*7*/ {0}, 166 /*8*/ { IDT_SW_NTP8_PCIECMDSTS, IDT_SW_NTP8_PCIELCTLSTS, 167 IDT_SW_NTP8_NTCTL, 168 IDT_SW_SWPORT8CTL, IDT_SW_SWPORT8STS, 169 { {IDT_SW_NTP8_BARSETUP0, IDT_SW_NTP8_BARLIMIT0, 170 IDT_SW_NTP8_BARLTBASE0, IDT_SW_NTP8_BARUTBASE0}, 171 {IDT_SW_NTP8_BARSETUP1, IDT_SW_NTP8_BARLIMIT1, 172 IDT_SW_NTP8_BARLTBASE1, IDT_SW_NTP8_BARUTBASE1}, 173 {IDT_SW_NTP8_BARSETUP2, IDT_SW_NTP8_BARLIMIT2, 174 IDT_SW_NTP8_BARLTBASE2, IDT_SW_NTP8_BARUTBASE2}, 175 {IDT_SW_NTP8_BARSETUP3, IDT_SW_NTP8_BARLIMIT3, 176 IDT_SW_NTP8_BARLTBASE3, IDT_SW_NTP8_BARUTBASE3}, 177 {IDT_SW_NTP8_BARSETUP4, IDT_SW_NTP8_BARLIMIT4, 178 IDT_SW_NTP8_BARLTBASE4, IDT_SW_NTP8_BARUTBASE4}, 179 {IDT_SW_NTP8_BARSETUP5, IDT_SW_NTP8_BARLIMIT5, 180 IDT_SW_NTP8_BARLTBASE5, IDT_SW_NTP8_BARUTBASE5} } }, 181 /*9*/ {0}, 182 /*10*/ {0}, 183 /*11*/ {0}, 184 /*12*/ { IDT_SW_NTP12_PCIECMDSTS, IDT_SW_NTP12_PCIELCTLSTS, 185 IDT_SW_NTP12_NTCTL, 186 IDT_SW_SWPORT12CTL, IDT_SW_SWPORT12STS, 187 { {IDT_SW_NTP12_BARSETUP0, IDT_SW_NTP12_BARLIMIT0, 188 IDT_SW_NTP12_BARLTBASE0, IDT_SW_NTP12_BARUTBASE0}, 189 {IDT_SW_NTP12_BARSETUP1, IDT_SW_NTP12_BARLIMIT1, 190 IDT_SW_NTP12_BARLTBASE1, IDT_SW_NTP12_BARUTBASE1}, 191 {IDT_SW_NTP12_BARSETUP2, IDT_SW_NTP12_BARLIMIT2, 192 IDT_SW_NTP12_BARLTBASE2, IDT_SW_NTP12_BARUTBASE2}, 193 {IDT_SW_NTP12_BARSETUP3, IDT_SW_NTP12_BARLIMIT3, 194 IDT_SW_NTP12_BARLTBASE3, IDT_SW_NTP12_BARUTBASE3}, 195 {IDT_SW_NTP12_BARSETUP4, IDT_SW_NTP12_BARLIMIT4, 196 IDT_SW_NTP12_BARLTBASE4, IDT_SW_NTP12_BARUTBASE4}, 197 {IDT_SW_NTP12_BARSETUP5, IDT_SW_NTP12_BARLIMIT5, 198 IDT_SW_NTP12_BARLTBASE5, IDT_SW_NTP12_BARUTBASE5} } }, 199 /*13*/ {0}, 200 /*14*/ {0}, 201 /*15*/ {0}, 202 /*16*/ { IDT_SW_NTP16_PCIECMDSTS, IDT_SW_NTP16_PCIELCTLSTS, 203 IDT_SW_NTP16_NTCTL, 204 IDT_SW_SWPORT16CTL, IDT_SW_SWPORT16STS, 205 { {IDT_SW_NTP16_BARSETUP0, IDT_SW_NTP16_BARLIMIT0, 206 IDT_SW_NTP16_BARLTBASE0, IDT_SW_NTP16_BARUTBASE0}, 207 {IDT_SW_NTP16_BARSETUP1, IDT_SW_NTP16_BARLIMIT1, 208 IDT_SW_NTP16_BARLTBASE1, IDT_SW_NTP16_BARUTBASE1}, 209 {IDT_SW_NTP16_BARSETUP2, IDT_SW_NTP16_BARLIMIT2, 210 IDT_SW_NTP16_BARLTBASE2, IDT_SW_NTP16_BARUTBASE2}, 211 {IDT_SW_NTP16_BARSETUP3, IDT_SW_NTP16_BARLIMIT3, 212 IDT_SW_NTP16_BARLTBASE3, IDT_SW_NTP16_BARUTBASE3}, 213 {IDT_SW_NTP16_BARSETUP4, IDT_SW_NTP16_BARLIMIT4, 214 IDT_SW_NTP16_BARLTBASE4, IDT_SW_NTP16_BARUTBASE4}, 215 {IDT_SW_NTP16_BARSETUP5, IDT_SW_NTP16_BARLIMIT5, 216 IDT_SW_NTP16_BARLTBASE5, IDT_SW_NTP16_BARUTBASE5} } }, 217 /*17*/ {0}, 218 /*18*/ {0}, 219 /*19*/ {0}, 220 /*20*/ { IDT_SW_NTP20_PCIECMDSTS, IDT_SW_NTP20_PCIELCTLSTS, 221 IDT_SW_NTP20_NTCTL, 222 IDT_SW_SWPORT20CTL, IDT_SW_SWPORT20STS, 223 { {IDT_SW_NTP20_BARSETUP0, IDT_SW_NTP20_BARLIMIT0, 224 IDT_SW_NTP20_BARLTBASE0, IDT_SW_NTP20_BARUTBASE0}, 225 {IDT_SW_NTP20_BARSETUP1, IDT_SW_NTP20_BARLIMIT1, 226 IDT_SW_NTP20_BARLTBASE1, IDT_SW_NTP20_BARUTBASE1}, 227 {IDT_SW_NTP20_BARSETUP2, IDT_SW_NTP20_BARLIMIT2, 228 IDT_SW_NTP20_BARLTBASE2, IDT_SW_NTP20_BARUTBASE2}, 229 {IDT_SW_NTP20_BARSETUP3, IDT_SW_NTP20_BARLIMIT3, 230 IDT_SW_NTP20_BARLTBASE3, IDT_SW_NTP20_BARUTBASE3}, 231 {IDT_SW_NTP20_BARSETUP4, IDT_SW_NTP20_BARLIMIT4, 232 IDT_SW_NTP20_BARLTBASE4, IDT_SW_NTP20_BARUTBASE4}, 233 {IDT_SW_NTP20_BARSETUP5, IDT_SW_NTP20_BARLIMIT5, 234 IDT_SW_NTP20_BARLTBASE5, IDT_SW_NTP20_BARUTBASE5} } }, 235 /*21*/ {0}, 236 /*22*/ {0}, 237 /*23*/ {0} 238 }; 239 240 /* 241 * IDT PCIe-switch partitions table with the corresponding control, status 242 * and messages control registers 243 */ 244 static const struct idt_ntb_part partdata_tbl[IDT_MAX_NR_PARTS] = { 245 /*0*/ { IDT_SW_SWPART0CTL, IDT_SW_SWPART0STS, 246 {IDT_SW_SWP0MSGCTL0, IDT_SW_SWP0MSGCTL1, 247 IDT_SW_SWP0MSGCTL2, IDT_SW_SWP0MSGCTL3} }, 248 /*1*/ { IDT_SW_SWPART1CTL, IDT_SW_SWPART1STS, 249 {IDT_SW_SWP1MSGCTL0, IDT_SW_SWP1MSGCTL1, 250 IDT_SW_SWP1MSGCTL2, IDT_SW_SWP1MSGCTL3} }, 251 /*2*/ { IDT_SW_SWPART2CTL, IDT_SW_SWPART2STS, 252 {IDT_SW_SWP2MSGCTL0, IDT_SW_SWP2MSGCTL1, 253 IDT_SW_SWP2MSGCTL2, IDT_SW_SWP2MSGCTL3} }, 254 /*3*/ { IDT_SW_SWPART3CTL, IDT_SW_SWPART3STS, 255 {IDT_SW_SWP3MSGCTL0, IDT_SW_SWP3MSGCTL1, 256 IDT_SW_SWP3MSGCTL2, IDT_SW_SWP3MSGCTL3} }, 257 /*4*/ { IDT_SW_SWPART4CTL, IDT_SW_SWPART4STS, 258 {IDT_SW_SWP4MSGCTL0, IDT_SW_SWP4MSGCTL1, 259 IDT_SW_SWP4MSGCTL2, IDT_SW_SWP4MSGCTL3} }, 260 /*5*/ { IDT_SW_SWPART5CTL, IDT_SW_SWPART5STS, 261 {IDT_SW_SWP5MSGCTL0, IDT_SW_SWP5MSGCTL1, 262 IDT_SW_SWP5MSGCTL2, IDT_SW_SWP5MSGCTL3} }, 263 /*6*/ { IDT_SW_SWPART6CTL, IDT_SW_SWPART6STS, 264 {IDT_SW_SWP6MSGCTL0, IDT_SW_SWP6MSGCTL1, 265 IDT_SW_SWP6MSGCTL2, IDT_SW_SWP6MSGCTL3} }, 266 /*7*/ { IDT_SW_SWPART7CTL, IDT_SW_SWPART7STS, 267 {IDT_SW_SWP7MSGCTL0, IDT_SW_SWP7MSGCTL1, 268 IDT_SW_SWP7MSGCTL2, IDT_SW_SWP7MSGCTL3} } 269 }; 270 271 /* 272 * DebugFS directory to place the driver debug file 273 */ 274 static struct dentry *dbgfs_topdir; 275 276 /*============================================================================= 277 * 1. IDT PCIe-switch registers IO-functions 278 * 279 * Beside ordinary configuration space registers IDT PCIe-switch expose 280 * global configuration registers, which are used to determine state of other 281 * device ports as well as being notified of some switch-related events. 282 * Additionally all the configuration space registers of all the IDT 283 * PCIe-switch functions are mapped to the Global Address space, so each 284 * function can determine a configuration of any other PCI-function. 285 * Functions declared in this chapter are created to encapsulate access 286 * to configuration and global registers, so the driver code just need to 287 * provide IDT NTB hardware descriptor and a register address. 288 *============================================================================= 289 */ 290 291 /* 292 * idt_nt_write() - PCI configuration space registers write method 293 * @ndev: IDT NTB hardware driver descriptor 294 * @reg: Register to write data to 295 * @data: Value to write to the register 296 * 297 * IDT PCIe-switch registers are all Little endian. 298 */ 299 static void idt_nt_write(struct idt_ntb_dev *ndev, 300 const unsigned int reg, const u32 data) 301 { 302 /* 303 * It's obvious bug to request a register exceeding the maximum possible 304 * value as well as to have it unaligned. 305 */ 306 if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN))) 307 return; 308 309 /* Just write the value to the specified register */ 310 iowrite32(data, ndev->cfgspc + (ptrdiff_t)reg); 311 } 312 313 /* 314 * idt_nt_read() - PCI configuration space registers read method 315 * @ndev: IDT NTB hardware driver descriptor 316 * @reg: Register to write data to 317 * 318 * IDT PCIe-switch Global configuration registers are all Little endian. 319 * 320 * Return: register value 321 */ 322 static u32 idt_nt_read(struct idt_ntb_dev *ndev, const unsigned int reg) 323 { 324 /* 325 * It's obvious bug to request a register exceeding the maximum possible 326 * value as well as to have it unaligned. 327 */ 328 if (WARN_ON(reg > IDT_REG_PCI_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN))) 329 return ~0; 330 331 /* Just read the value from the specified register */ 332 return ioread32(ndev->cfgspc + (ptrdiff_t)reg); 333 } 334 335 /* 336 * idt_sw_write() - Global registers write method 337 * @ndev: IDT NTB hardware driver descriptor 338 * @reg: Register to write data to 339 * @data: Value to write to the register 340 * 341 * IDT PCIe-switch Global configuration registers are all Little endian. 342 */ 343 static void idt_sw_write(struct idt_ntb_dev *ndev, 344 const unsigned int reg, const u32 data) 345 { 346 unsigned long irqflags; 347 348 /* 349 * It's obvious bug to request a register exceeding the maximum possible 350 * value as well as to have it unaligned. 351 */ 352 if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN))) 353 return; 354 355 /* Lock GASA registers operations */ 356 spin_lock_irqsave(&ndev->gasa_lock, irqflags); 357 /* Set the global register address */ 358 iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR); 359 /* Put the new value of the register */ 360 iowrite32(data, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA); 361 /* Unlock GASA registers operations */ 362 spin_unlock_irqrestore(&ndev->gasa_lock, irqflags); 363 } 364 365 /* 366 * idt_sw_read() - Global registers read method 367 * @ndev: IDT NTB hardware driver descriptor 368 * @reg: Register to write data to 369 * 370 * IDT PCIe-switch Global configuration registers are all Little endian. 371 * 372 * Return: register value 373 */ 374 static u32 idt_sw_read(struct idt_ntb_dev *ndev, const unsigned int reg) 375 { 376 unsigned long irqflags; 377 u32 data; 378 379 /* 380 * It's obvious bug to request a register exceeding the maximum possible 381 * value as well as to have it unaligned. 382 */ 383 if (WARN_ON(reg > IDT_REG_SW_MAX || !IS_ALIGNED(reg, IDT_REG_ALIGN))) 384 return ~0; 385 386 /* Lock GASA registers operations */ 387 spin_lock_irqsave(&ndev->gasa_lock, irqflags); 388 /* Set the global register address */ 389 iowrite32((u32)reg, ndev->cfgspc + (ptrdiff_t)IDT_NT_GASAADDR); 390 /* Get the data of the register (read ops acts as MMIO barrier) */ 391 data = ioread32(ndev->cfgspc + (ptrdiff_t)IDT_NT_GASADATA); 392 /* Unlock GASA registers operations */ 393 spin_unlock_irqrestore(&ndev->gasa_lock, irqflags); 394 395 return data; 396 } 397 398 /* 399 * idt_reg_set_bits() - set bits of a passed register 400 * @ndev: IDT NTB hardware driver descriptor 401 * @reg: Register to change bits of 402 * @reg_lock: Register access spin lock 403 * @valid_mask: Mask of valid bits 404 * @set_bits: Bitmask to set 405 * 406 * Helper method to check whether a passed bitfield is valid and set 407 * corresponding bits of a register. 408 * 409 * WARNING! Make sure the passed register isn't accessed over plane 410 * idt_nt_write() method (read method is ok to be used concurrently). 411 * 412 * Return: zero on success, negative error on invalid bitmask. 413 */ 414 static inline int idt_reg_set_bits(struct idt_ntb_dev *ndev, unsigned int reg, 415 spinlock_t *reg_lock, 416 u64 valid_mask, u64 set_bits) 417 { 418 unsigned long irqflags; 419 u32 data; 420 421 if (set_bits & ~(u64)valid_mask) 422 return -EINVAL; 423 424 /* Lock access to the register unless the change is written back */ 425 spin_lock_irqsave(reg_lock, irqflags); 426 data = idt_nt_read(ndev, reg) | (u32)set_bits; 427 idt_nt_write(ndev, reg, data); 428 /* Unlock the register */ 429 spin_unlock_irqrestore(reg_lock, irqflags); 430 431 return 0; 432 } 433 434 /* 435 * idt_reg_clear_bits() - clear bits of a passed register 436 * @ndev: IDT NTB hardware driver descriptor 437 * @reg: Register to change bits of 438 * @reg_lock: Register access spin lock 439 * @set_bits: Bitmask to clear 440 * 441 * Helper method to check whether a passed bitfield is valid and clear 442 * corresponding bits of a register. 443 * 444 * NOTE! Invalid bits are always considered cleared so it's not an error 445 * to clear them over. 446 * 447 * WARNING! Make sure the passed register isn't accessed over plane 448 * idt_nt_write() method (read method is ok to use concurrently). 449 */ 450 static inline void idt_reg_clear_bits(struct idt_ntb_dev *ndev, 451 unsigned int reg, spinlock_t *reg_lock, 452 u64 clear_bits) 453 { 454 unsigned long irqflags; 455 u32 data; 456 457 /* Lock access to the register unless the change is written back */ 458 spin_lock_irqsave(reg_lock, irqflags); 459 data = idt_nt_read(ndev, reg) & ~(u32)clear_bits; 460 idt_nt_write(ndev, reg, data); 461 /* Unlock the register */ 462 spin_unlock_irqrestore(reg_lock, irqflags); 463 } 464 465 /*=========================================================================== 466 * 2. Ports operations 467 * 468 * IDT PCIe-switches can have from 3 up to 8 ports with possible 469 * NT-functions enabled. So all the possible ports need to be scanned looking 470 * for NTB activated. NTB API will have enumerated only the ports with NTB. 471 *=========================================================================== 472 */ 473 474 /* 475 * idt_scan_ports() - scan IDT PCIe-switch ports collecting info in the tables 476 * @ndev: Pointer to the PCI device descriptor 477 * 478 * Return: zero on success, otherwise a negative error number. 479 */ 480 static int idt_scan_ports(struct idt_ntb_dev *ndev) 481 { 482 unsigned char pidx, port, part; 483 u32 data, portsts, partsts; 484 485 /* Retrieve the local port number */ 486 data = idt_nt_read(ndev, IDT_NT_PCIELCAP); 487 ndev->port = GET_FIELD(PCIELCAP_PORTNUM, data); 488 489 /* Retrieve the local partition number */ 490 portsts = idt_sw_read(ndev, portdata_tbl[ndev->port].sts); 491 ndev->part = GET_FIELD(SWPORTxSTS_SWPART, portsts); 492 493 /* Initialize port/partition -> index tables with invalid values */ 494 memset(ndev->port_idx_map, -EINVAL, sizeof(ndev->port_idx_map)); 495 memset(ndev->part_idx_map, -EINVAL, sizeof(ndev->part_idx_map)); 496 497 /* 498 * Walk over all the possible ports checking whether any of them has 499 * NT-function activated 500 */ 501 ndev->peer_cnt = 0; 502 for (pidx = 0; pidx < ndev->swcfg->port_cnt; pidx++) { 503 port = ndev->swcfg->ports[pidx]; 504 /* Skip local port */ 505 if (port == ndev->port) 506 continue; 507 508 /* Read the port status register to get it partition */ 509 portsts = idt_sw_read(ndev, portdata_tbl[port].sts); 510 part = GET_FIELD(SWPORTxSTS_SWPART, portsts); 511 512 /* Retrieve the partition status */ 513 partsts = idt_sw_read(ndev, partdata_tbl[part].sts); 514 /* Check if partition state is active and port has NTB */ 515 if (IS_FLD_SET(SWPARTxSTS_STATE, partsts, ACT) && 516 (IS_FLD_SET(SWPORTxSTS_MODE, portsts, NT) || 517 IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNT) || 518 IS_FLD_SET(SWPORTxSTS_MODE, portsts, USNTDMA) || 519 IS_FLD_SET(SWPORTxSTS_MODE, portsts, NTDMA))) { 520 /* Save the port and partition numbers */ 521 ndev->peers[ndev->peer_cnt].port = port; 522 ndev->peers[ndev->peer_cnt].part = part; 523 /* Fill in the port/partition -> index tables */ 524 ndev->port_idx_map[port] = ndev->peer_cnt; 525 ndev->part_idx_map[part] = ndev->peer_cnt; 526 ndev->peer_cnt++; 527 } 528 } 529 530 dev_dbg(&ndev->ntb.pdev->dev, "Local port: %hhu, num of peers: %hhu\n", 531 ndev->port, ndev->peer_cnt); 532 533 /* It's useless to have this driver loaded if there is no any peer */ 534 if (ndev->peer_cnt == 0) { 535 dev_warn(&ndev->ntb.pdev->dev, "No active peer found\n"); 536 return -ENODEV; 537 } 538 539 return 0; 540 } 541 542 /* 543 * idt_ntb_port_number() - get the local port number 544 * @ntb: NTB device context. 545 * 546 * Return: the local port number 547 */ 548 static int idt_ntb_port_number(struct ntb_dev *ntb) 549 { 550 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 551 552 return ndev->port; 553 } 554 555 /* 556 * idt_ntb_peer_port_count() - get the number of peer ports 557 * @ntb: NTB device context. 558 * 559 * Return the count of detected peer NT-functions. 560 * 561 * Return: number of peer ports 562 */ 563 static int idt_ntb_peer_port_count(struct ntb_dev *ntb) 564 { 565 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 566 567 return ndev->peer_cnt; 568 } 569 570 /* 571 * idt_ntb_peer_port_number() - get peer port by given index 572 * @ntb: NTB device context. 573 * @pidx: Peer port index. 574 * 575 * Return: peer port or negative error 576 */ 577 static int idt_ntb_peer_port_number(struct ntb_dev *ntb, int pidx) 578 { 579 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 580 581 if (pidx < 0 || ndev->peer_cnt <= pidx) 582 return -EINVAL; 583 584 /* Return the detected NT-function port number */ 585 return ndev->peers[pidx].port; 586 } 587 588 /* 589 * idt_ntb_peer_port_idx() - get peer port index by given port number 590 * @ntb: NTB device context. 591 * @port: Peer port number. 592 * 593 * Internal port -> index table is pre-initialized with -EINVAL values, 594 * so we just need to return it value 595 * 596 * Return: peer NT-function port index or negative error 597 */ 598 static int idt_ntb_peer_port_idx(struct ntb_dev *ntb, int port) 599 { 600 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 601 602 if (port < 0 || IDT_MAX_NR_PORTS <= port) 603 return -EINVAL; 604 605 return ndev->port_idx_map[port]; 606 } 607 608 /*=========================================================================== 609 * 3. Link status operations 610 * There is no any ready-to-use method to have peer ports notified if NTB 611 * link is set up or got down. Instead global signal can be used instead. 612 * In case if any one of ports changes local NTB link state, it sends 613 * global signal and clears corresponding global state bit. Then all the ports 614 * receive a notification of that, so to make client driver being aware of 615 * possible NTB link change. 616 * Additionally each of active NT-functions is subscribed to PCIe-link 617 * state changes of peer ports. 618 *=========================================================================== 619 */ 620 621 static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev); 622 623 /* 624 * idt_init_link() - Initialize NTB link state notification subsystem 625 * @ndev: IDT NTB hardware driver descriptor 626 * 627 * Function performs the basic initialization of some global registers 628 * needed to enable IRQ-based notifications of PCIe Link Up/Down and 629 * Global Signal events. 630 * NOTE Since it's not possible to determine when all the NTB peer drivers are 631 * unloaded as well as have those registers accessed concurrently, we must 632 * preinitialize them with the same value and leave it uncleared on local 633 * driver unload. 634 */ 635 static void idt_init_link(struct idt_ntb_dev *ndev) 636 { 637 u32 part_mask, port_mask, se_mask; 638 unsigned char pidx; 639 640 /* Initialize spin locker of Mapping Table access registers */ 641 spin_lock_init(&ndev->mtbl_lock); 642 643 /* Walk over all detected peers collecting port and partition masks */ 644 port_mask = ~BIT(ndev->port); 645 part_mask = ~BIT(ndev->part); 646 for (pidx = 0; pidx < ndev->peer_cnt; pidx++) { 647 port_mask &= ~BIT(ndev->peers[pidx].port); 648 part_mask &= ~BIT(ndev->peers[pidx].part); 649 } 650 651 /* Clean the Link Up/Down and GLobal Signal status registers */ 652 idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1); 653 idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1); 654 idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1); 655 656 /* Unmask NT-activated partitions to receive Global Switch events */ 657 idt_sw_write(ndev, IDT_SW_SEPMSK, part_mask); 658 659 /* Enable PCIe Link Up events of NT-activated ports */ 660 idt_sw_write(ndev, IDT_SW_SELINKUPMSK, port_mask); 661 662 /* Enable PCIe Link Down events of NT-activated ports */ 663 idt_sw_write(ndev, IDT_SW_SELINKDNMSK, port_mask); 664 665 /* Unmask NT-activated partitions to receive Global Signal events */ 666 idt_sw_write(ndev, IDT_SW_SEGSIGMSK, part_mask); 667 668 /* Unmask Link Up/Down and Global Switch Events */ 669 se_mask = ~(IDT_SEMSK_LINKUP | IDT_SEMSK_LINKDN | IDT_SEMSK_GSIGNAL); 670 idt_sw_write(ndev, IDT_SW_SEMSK, se_mask); 671 672 dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events initialized"); 673 } 674 675 /* 676 * idt_deinit_link() - deinitialize link subsystem 677 * @ndev: IDT NTB hardware driver descriptor 678 * 679 * Just disable the link back. 680 */ 681 static void idt_deinit_link(struct idt_ntb_dev *ndev) 682 { 683 /* Disable the link */ 684 idt_ntb_local_link_disable(ndev); 685 686 dev_dbg(&ndev->ntb.pdev->dev, "NTB link status events deinitialized"); 687 } 688 689 /* 690 * idt_se_isr() - switch events ISR 691 * @ndev: IDT NTB hardware driver descriptor 692 * @ntint_sts: NT-function interrupt status 693 * 694 * This driver doesn't support IDT PCIe-switch dynamic reconfigurations, 695 * Failover capability, etc, so switch events are utilized to notify of 696 * PCIe and NTB link events. 697 * The method is called from PCIe ISR bottom-half routine. 698 */ 699 static void idt_se_isr(struct idt_ntb_dev *ndev, u32 ntint_sts) 700 { 701 u32 sests; 702 703 /* Read Switch Events status */ 704 sests = idt_sw_read(ndev, IDT_SW_SESTS); 705 706 /* Clean the Link Up/Down and Global Signal status registers */ 707 idt_sw_write(ndev, IDT_SW_SELINKUPSTS, (u32)-1); 708 idt_sw_write(ndev, IDT_SW_SELINKDNSTS, (u32)-1); 709 idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)-1); 710 711 /* Clean the corresponding interrupt bit */ 712 idt_nt_write(ndev, IDT_NT_NTINTSTS, IDT_NTINTSTS_SEVENT); 713 714 dev_dbg(&ndev->ntb.pdev->dev, "SE IRQ detected %#08x (SESTS %#08x)", 715 ntint_sts, sests); 716 717 /* Notify the client driver of possible link state change */ 718 ntb_link_event(&ndev->ntb); 719 } 720 721 /* 722 * idt_ntb_local_link_enable() - enable the local NTB link. 723 * @ndev: IDT NTB hardware driver descriptor 724 * 725 * In order to enable the NTB link we need: 726 * - enable Completion TLPs translation 727 * - initialize mapping table to enable the Request ID translation 728 * - notify peers of NTB link state change 729 */ 730 static void idt_ntb_local_link_enable(struct idt_ntb_dev *ndev) 731 { 732 u32 reqid, mtbldata = 0; 733 unsigned long irqflags; 734 735 /* Enable the ID protection and Completion TLPs translation */ 736 idt_nt_write(ndev, IDT_NT_NTCTL, IDT_NTCTL_CPEN); 737 738 /* Retrieve the current Requester ID (Bus:Device:Function) */ 739 reqid = idt_nt_read(ndev, IDT_NT_REQIDCAP); 740 741 /* 742 * Set the corresponding NT Mapping table entry of port partition index 743 * with the data to perform the Request ID translation 744 */ 745 mtbldata = SET_FIELD(NTMTBLDATA_REQID, 0, reqid) | 746 SET_FIELD(NTMTBLDATA_PART, 0, ndev->part) | 747 IDT_NTMTBLDATA_VALID; 748 spin_lock_irqsave(&ndev->mtbl_lock, irqflags); 749 idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part); 750 idt_nt_write(ndev, IDT_NT_NTMTBLDATA, mtbldata); 751 spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags); 752 753 /* Notify the peers by setting and clearing the global signal bit */ 754 idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET); 755 idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part); 756 } 757 758 /* 759 * idt_ntb_local_link_disable() - disable the local NTB link. 760 * @ndev: IDT NTB hardware driver descriptor 761 * 762 * In order to enable the NTB link we need: 763 * - disable Completion TLPs translation 764 * - clear corresponding mapping table entry 765 * - notify peers of NTB link state change 766 */ 767 static void idt_ntb_local_link_disable(struct idt_ntb_dev *ndev) 768 { 769 unsigned long irqflags; 770 771 /* Disable Completion TLPs translation */ 772 idt_nt_write(ndev, IDT_NT_NTCTL, 0); 773 774 /* Clear the corresponding NT Mapping table entry */ 775 spin_lock_irqsave(&ndev->mtbl_lock, irqflags); 776 idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part); 777 idt_nt_write(ndev, IDT_NT_NTMTBLDATA, 0); 778 spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags); 779 780 /* Notify the peers by setting and clearing the global signal bit */ 781 idt_nt_write(ndev, IDT_NT_NTGSIGNAL, IDT_NTGSIGNAL_SET); 782 idt_sw_write(ndev, IDT_SW_SEGSIGSTS, (u32)1 << ndev->part); 783 } 784 785 /* 786 * idt_ntb_local_link_is_up() - test wethter local NTB link is up 787 * @ndev: IDT NTB hardware driver descriptor 788 * 789 * Local link is up under the following conditions: 790 * - Bus mastering is enabled 791 * - NTCTL has Completion TLPs translation enabled 792 * - Mapping table permits Request TLPs translation 793 * NOTE: We don't need to check PCIe link state since it's obviously 794 * up while we are able to communicate with IDT PCIe-switch 795 * 796 * Return: true if link is up, otherwise false 797 */ 798 static bool idt_ntb_local_link_is_up(struct idt_ntb_dev *ndev) 799 { 800 unsigned long irqflags; 801 u32 data; 802 803 /* Read the local Bus Master Enable status */ 804 data = idt_nt_read(ndev, IDT_NT_PCICMDSTS); 805 if (!(data & IDT_PCICMDSTS_BME)) 806 return false; 807 808 /* Read the local Completion TLPs translation enable status */ 809 data = idt_nt_read(ndev, IDT_NT_NTCTL); 810 if (!(data & IDT_NTCTL_CPEN)) 811 return false; 812 813 /* Read Mapping table entry corresponding to the local partition */ 814 spin_lock_irqsave(&ndev->mtbl_lock, irqflags); 815 idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->part); 816 data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA); 817 spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags); 818 819 return !!(data & IDT_NTMTBLDATA_VALID); 820 } 821 822 /* 823 * idt_ntb_peer_link_is_up() - test whether peer NTB link is up 824 * @ndev: IDT NTB hardware driver descriptor 825 * @pidx: Peer port index 826 * 827 * Peer link is up under the following conditions: 828 * - PCIe link is up 829 * - Bus mastering is enabled 830 * - NTCTL has Completion TLPs translation enabled 831 * - Mapping table permits Request TLPs translation 832 * 833 * Return: true if link is up, otherwise false 834 */ 835 static bool idt_ntb_peer_link_is_up(struct idt_ntb_dev *ndev, int pidx) 836 { 837 unsigned long irqflags; 838 unsigned char port; 839 u32 data; 840 841 /* Retrieve the device port number */ 842 port = ndev->peers[pidx].port; 843 844 /* Check whether PCIe link is up */ 845 data = idt_sw_read(ndev, portdata_tbl[port].sts); 846 if (!(data & IDT_SWPORTxSTS_LINKUP)) 847 return false; 848 849 /* Check whether bus mastering is enabled on the peer port */ 850 data = idt_sw_read(ndev, portdata_tbl[port].pcicmdsts); 851 if (!(data & IDT_PCICMDSTS_BME)) 852 return false; 853 854 /* Check if Completion TLPs translation is enabled on the peer port */ 855 data = idt_sw_read(ndev, portdata_tbl[port].ntctl); 856 if (!(data & IDT_NTCTL_CPEN)) 857 return false; 858 859 /* Read Mapping table entry corresponding to the peer partition */ 860 spin_lock_irqsave(&ndev->mtbl_lock, irqflags); 861 idt_nt_write(ndev, IDT_NT_NTMTBLADDR, ndev->peers[pidx].part); 862 data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA); 863 spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags); 864 865 return !!(data & IDT_NTMTBLDATA_VALID); 866 } 867 868 /* 869 * idt_ntb_link_is_up() - get the current ntb link state (NTB API callback) 870 * @ntb: NTB device context. 871 * @speed: OUT - The link speed expressed as PCIe generation number. 872 * @width: OUT - The link width expressed as the number of PCIe lanes. 873 * 874 * Get the bitfield of NTB link states for all peer ports 875 * 876 * Return: bitfield of indexed ports link state: bit is set/cleared if the 877 * link is up/down respectively. 878 */ 879 static u64 idt_ntb_link_is_up(struct ntb_dev *ntb, 880 enum ntb_speed *speed, enum ntb_width *width) 881 { 882 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 883 unsigned char pidx; 884 u64 status; 885 u32 data; 886 887 /* Retrieve the local link speed and width */ 888 if (speed != NULL || width != NULL) { 889 data = idt_nt_read(ndev, IDT_NT_PCIELCTLSTS); 890 if (speed != NULL) 891 *speed = GET_FIELD(PCIELCTLSTS_CLS, data); 892 if (width != NULL) 893 *width = GET_FIELD(PCIELCTLSTS_NLW, data); 894 } 895 896 /* If local NTB link isn't up then all the links are considered down */ 897 if (!idt_ntb_local_link_is_up(ndev)) 898 return 0; 899 900 /* Collect all the peer ports link states into the bitfield */ 901 status = 0; 902 for (pidx = 0; pidx < ndev->peer_cnt; pidx++) { 903 if (idt_ntb_peer_link_is_up(ndev, pidx)) 904 status |= ((u64)1 << pidx); 905 } 906 907 return status; 908 } 909 910 /* 911 * idt_ntb_link_enable() - enable local port ntb link (NTB API callback) 912 * @ntb: NTB device context. 913 * @max_speed: The maximum link speed expressed as PCIe generation number. 914 * @max_width: The maximum link width expressed as the number of PCIe lanes. 915 * 916 * Enable just local NTB link. PCIe link parameters are ignored. 917 * 918 * Return: always zero. 919 */ 920 static int idt_ntb_link_enable(struct ntb_dev *ntb, enum ntb_speed speed, 921 enum ntb_width width) 922 { 923 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 924 925 /* Just enable the local NTB link */ 926 idt_ntb_local_link_enable(ndev); 927 928 dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link enabled"); 929 930 return 0; 931 } 932 933 /* 934 * idt_ntb_link_disable() - disable local port ntb link (NTB API callback) 935 * @ntb: NTB device context. 936 * 937 * Disable just local NTB link. 938 * 939 * Return: always zero. 940 */ 941 static int idt_ntb_link_disable(struct ntb_dev *ntb) 942 { 943 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 944 945 /* Just disable the local NTB link */ 946 idt_ntb_local_link_disable(ndev); 947 948 dev_dbg(&ndev->ntb.pdev->dev, "Local NTB link disabled"); 949 950 return 0; 951 } 952 953 /*============================================================================= 954 * 4. Memory Window operations 955 * 956 * IDT PCIe-switches have two types of memory windows: MWs with direct 957 * address translation and MWs with LUT based translation. The first type of 958 * MWs is simple map of corresponding BAR address space to a memory space 959 * of specified target port. So it implemets just ont-to-one mapping. Lookup 960 * table in its turn can map one BAR address space to up to 24 different 961 * memory spaces of different ports. 962 * NT-functions BARs can be turned on to implement either direct or lookup 963 * table based address translations, so: 964 * BAR0 - NT configuration registers space/direct address translation 965 * BAR1 - direct address translation/upper address of BAR0x64 966 * BAR2 - direct address translation/Lookup table with either 12 or 24 entries 967 * BAR3 - direct address translation/upper address of BAR2x64 968 * BAR4 - direct address translation/Lookup table with either 12 or 24 entries 969 * BAR5 - direct address translation/upper address of BAR4x64 970 * Additionally BAR2 and BAR4 can't have 24-entries LUT enabled at the same 971 * time. Since the BARs setup can be rather complicated this driver implements 972 * a scanning algorithm to have all the possible memory windows configuration 973 * covered. 974 * 975 * NOTE 1 BAR setup must be done before Linux kernel enumerated NT-function 976 * of any port, so this driver would have memory windows configurations fixed. 977 * In this way all initializations must be performed either by platform BIOS 978 * or using EEPROM connected to IDT PCIe-switch master SMBus. 979 * 980 * NOTE 2 This driver expects BAR0 mapping NT-function configuration space. 981 * Easy calculation can give us an upper boundary of 29 possible memory windows 982 * per each NT-function if all the BARs are of 32bit type. 983 *============================================================================= 984 */ 985 986 /* 987 * idt_get_mw_count() - get memory window count 988 * @mw_type: Memory window type 989 * 990 * Return: number of memory windows with respect to the BAR type 991 */ 992 static inline unsigned char idt_get_mw_count(enum idt_mw_type mw_type) 993 { 994 switch (mw_type) { 995 case IDT_MW_DIR: 996 return 1; 997 case IDT_MW_LUT12: 998 return 12; 999 case IDT_MW_LUT24: 1000 return 24; 1001 default: 1002 break; 1003 } 1004 1005 return 0; 1006 } 1007 1008 /* 1009 * idt_get_mw_name() - get memory window name 1010 * @mw_type: Memory window type 1011 * 1012 * Return: pointer to a string with name 1013 */ 1014 static inline char *idt_get_mw_name(enum idt_mw_type mw_type) 1015 { 1016 switch (mw_type) { 1017 case IDT_MW_DIR: 1018 return "DIR "; 1019 case IDT_MW_LUT12: 1020 return "LUT12"; 1021 case IDT_MW_LUT24: 1022 return "LUT24"; 1023 default: 1024 break; 1025 } 1026 1027 return "unknown"; 1028 } 1029 1030 /* 1031 * idt_scan_mws() - scan memory windows of the port 1032 * @ndev: IDT NTB hardware driver descriptor 1033 * @port: Port to get number of memory windows for 1034 * @mw_cnt: Out - number of memory windows 1035 * 1036 * It walks over BAR setup registers of the specified port and determines 1037 * the memory windows parameters if any activated. 1038 * 1039 * Return: array of memory windows 1040 */ 1041 static struct idt_mw_cfg *idt_scan_mws(struct idt_ntb_dev *ndev, int port, 1042 unsigned char *mw_cnt) 1043 { 1044 struct idt_mw_cfg mws[IDT_MAX_NR_MWS], *ret_mws; 1045 const struct idt_ntb_bar *bars; 1046 enum idt_mw_type mw_type; 1047 unsigned char widx, bidx, en_cnt; 1048 bool bar_64bit = false; 1049 int aprt_size; 1050 u32 data; 1051 1052 /* Retrieve the array of the BARs registers */ 1053 bars = portdata_tbl[port].bars; 1054 1055 /* Scan all the BARs belonging to the port */ 1056 *mw_cnt = 0; 1057 for (bidx = 0; bidx < IDT_BAR_CNT; bidx += 1 + bar_64bit) { 1058 /* Read BARSETUP register value */ 1059 data = idt_sw_read(ndev, bars[bidx].setup); 1060 1061 /* Skip disabled BARs */ 1062 if (!(data & IDT_BARSETUP_EN)) { 1063 bar_64bit = false; 1064 continue; 1065 } 1066 1067 /* Skip next BARSETUP if current one has 64bit addressing */ 1068 bar_64bit = IS_FLD_SET(BARSETUP_TYPE, data, 64); 1069 1070 /* Skip configuration space mapping BARs */ 1071 if (data & IDT_BARSETUP_MODE_CFG) 1072 continue; 1073 1074 /* Retrieve MW type/entries count and aperture size */ 1075 mw_type = GET_FIELD(BARSETUP_ATRAN, data); 1076 en_cnt = idt_get_mw_count(mw_type); 1077 aprt_size = (u64)1 << GET_FIELD(BARSETUP_SIZE, data); 1078 1079 /* Save configurations of all available memory windows */ 1080 for (widx = 0; widx < en_cnt; widx++, (*mw_cnt)++) { 1081 /* 1082 * IDT can expose a limited number of MWs, so it's bug 1083 * to have more than the driver expects 1084 */ 1085 if (*mw_cnt >= IDT_MAX_NR_MWS) 1086 return ERR_PTR(-EINVAL); 1087 1088 /* Save basic MW info */ 1089 mws[*mw_cnt].type = mw_type; 1090 mws[*mw_cnt].bar = bidx; 1091 mws[*mw_cnt].idx = widx; 1092 /* It's always DWORD aligned */ 1093 mws[*mw_cnt].addr_align = IDT_TRANS_ALIGN; 1094 /* DIR and LUT approachs differently configure MWs */ 1095 if (mw_type == IDT_MW_DIR) 1096 mws[*mw_cnt].size_max = aprt_size; 1097 else if (mw_type == IDT_MW_LUT12) 1098 mws[*mw_cnt].size_max = aprt_size / 16; 1099 else 1100 mws[*mw_cnt].size_max = aprt_size / 32; 1101 mws[*mw_cnt].size_align = (mw_type == IDT_MW_DIR) ? 1102 IDT_DIR_SIZE_ALIGN : mws[*mw_cnt].size_max; 1103 } 1104 } 1105 1106 /* Allocate memory for memory window descriptors */ 1107 ret_mws = devm_kcalloc(&ndev->ntb.pdev->dev, *mw_cnt, sizeof(*ret_mws), 1108 GFP_KERNEL); 1109 if (!ret_mws) 1110 return ERR_PTR(-ENOMEM); 1111 1112 /* Copy the info of detected memory windows */ 1113 memcpy(ret_mws, mws, (*mw_cnt)*sizeof(*ret_mws)); 1114 1115 return ret_mws; 1116 } 1117 1118 /* 1119 * idt_init_mws() - initialize memory windows subsystem 1120 * @ndev: IDT NTB hardware driver descriptor 1121 * 1122 * Scan BAR setup registers of local and peer ports to determine the 1123 * outbound and inbound memory windows parameters 1124 * 1125 * Return: zero on success, otherwise a negative error number 1126 */ 1127 static int idt_init_mws(struct idt_ntb_dev *ndev) 1128 { 1129 struct idt_ntb_peer *peer; 1130 unsigned char pidx; 1131 1132 /* Scan memory windows of the local port */ 1133 ndev->mws = idt_scan_mws(ndev, ndev->port, &ndev->mw_cnt); 1134 if (IS_ERR(ndev->mws)) { 1135 dev_err(&ndev->ntb.pdev->dev, 1136 "Failed to scan mws of local port %hhu", ndev->port); 1137 return PTR_ERR(ndev->mws); 1138 } 1139 1140 /* Scan memory windows of the peer ports */ 1141 for (pidx = 0; pidx < ndev->peer_cnt; pidx++) { 1142 peer = &ndev->peers[pidx]; 1143 peer->mws = idt_scan_mws(ndev, peer->port, &peer->mw_cnt); 1144 if (IS_ERR(peer->mws)) { 1145 dev_err(&ndev->ntb.pdev->dev, 1146 "Failed to scan mws of port %hhu", peer->port); 1147 return PTR_ERR(peer->mws); 1148 } 1149 } 1150 1151 /* Initialize spin locker of the LUT registers */ 1152 spin_lock_init(&ndev->lut_lock); 1153 1154 dev_dbg(&ndev->ntb.pdev->dev, "Outbound and inbound MWs initialized"); 1155 1156 return 0; 1157 } 1158 1159 /* 1160 * idt_ntb_mw_count() - number of inbound memory windows (NTB API callback) 1161 * @ntb: NTB device context. 1162 * @pidx: Port index of peer device. 1163 * 1164 * The value is returned for the specified peer, so generally speaking it can 1165 * be different for different port depending on the IDT PCIe-switch 1166 * initialization. 1167 * 1168 * Return: the number of memory windows. 1169 */ 1170 static int idt_ntb_mw_count(struct ntb_dev *ntb, int pidx) 1171 { 1172 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1173 1174 if (pidx < 0 || ndev->peer_cnt <= pidx) 1175 return -EINVAL; 1176 1177 return ndev->peers[pidx].mw_cnt; 1178 } 1179 1180 /* 1181 * idt_ntb_mw_get_align() - inbound memory window parameters (NTB API callback) 1182 * @ntb: NTB device context. 1183 * @pidx: Port index of peer device. 1184 * @widx: Memory window index. 1185 * @addr_align: OUT - the base alignment for translating the memory window 1186 * @size_align: OUT - the size alignment for translating the memory window 1187 * @size_max: OUT - the maximum size of the memory window 1188 * 1189 * The peer memory window parameters have already been determined, so just 1190 * return the corresponding values, which mustn't change within session. 1191 * 1192 * Return: Zero on success, otherwise a negative error number. 1193 */ 1194 static int idt_ntb_mw_get_align(struct ntb_dev *ntb, int pidx, int widx, 1195 resource_size_t *addr_align, 1196 resource_size_t *size_align, 1197 resource_size_t *size_max) 1198 { 1199 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1200 struct idt_ntb_peer *peer; 1201 1202 if (pidx < 0 || ndev->peer_cnt <= pidx) 1203 return -EINVAL; 1204 1205 peer = &ndev->peers[pidx]; 1206 1207 if (widx < 0 || peer->mw_cnt <= widx) 1208 return -EINVAL; 1209 1210 if (addr_align != NULL) 1211 *addr_align = peer->mws[widx].addr_align; 1212 1213 if (size_align != NULL) 1214 *size_align = peer->mws[widx].size_align; 1215 1216 if (size_max != NULL) 1217 *size_max = peer->mws[widx].size_max; 1218 1219 return 0; 1220 } 1221 1222 /* 1223 * idt_ntb_peer_mw_count() - number of outbound memory windows 1224 * (NTB API callback) 1225 * @ntb: NTB device context. 1226 * 1227 * Outbound memory windows parameters have been determined based on the 1228 * BAR setup registers value, which are mostly constants within one session. 1229 * 1230 * Return: the number of memory windows. 1231 */ 1232 static int idt_ntb_peer_mw_count(struct ntb_dev *ntb) 1233 { 1234 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1235 1236 return ndev->mw_cnt; 1237 } 1238 1239 /* 1240 * idt_ntb_peer_mw_get_addr() - get map address of an outbound memory window 1241 * (NTB API callback) 1242 * @ntb: NTB device context. 1243 * @widx: Memory window index (within ntb_peer_mw_count() return value). 1244 * @base: OUT - the base address of mapping region. 1245 * @size: OUT - the size of mapping region. 1246 * 1247 * Return just parameters of BAR resources mapping. Size reflects just the size 1248 * of the resource 1249 * 1250 * Return: Zero on success, otherwise a negative error number. 1251 */ 1252 static int idt_ntb_peer_mw_get_addr(struct ntb_dev *ntb, int widx, 1253 phys_addr_t *base, resource_size_t *size) 1254 { 1255 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1256 1257 if (widx < 0 || ndev->mw_cnt <= widx) 1258 return -EINVAL; 1259 1260 /* Mapping address is just properly shifted BAR resource start */ 1261 if (base != NULL) 1262 *base = pci_resource_start(ntb->pdev, ndev->mws[widx].bar) + 1263 ndev->mws[widx].idx * ndev->mws[widx].size_max; 1264 1265 /* Mapping size has already been calculated at MWs scanning */ 1266 if (size != NULL) 1267 *size = ndev->mws[widx].size_max; 1268 1269 return 0; 1270 } 1271 1272 /* 1273 * idt_ntb_peer_mw_set_trans() - set a translation address of a memory window 1274 * (NTB API callback) 1275 * @ntb: NTB device context. 1276 * @pidx: Port index of peer device the translation address received from. 1277 * @widx: Memory window index. 1278 * @addr: The dma address of the shared memory to access. 1279 * @size: The size of the shared memory to access. 1280 * 1281 * The Direct address translation and LUT base translation is initialized a 1282 * bit differenet. Although the parameters restriction are now determined by 1283 * the same code. 1284 * 1285 * Return: Zero on success, otherwise an error number. 1286 */ 1287 static int idt_ntb_peer_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx, 1288 u64 addr, resource_size_t size) 1289 { 1290 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1291 struct idt_mw_cfg *mw_cfg; 1292 u32 data = 0, lutoff = 0; 1293 1294 if (pidx < 0 || ndev->peer_cnt <= pidx) 1295 return -EINVAL; 1296 1297 if (widx < 0 || ndev->mw_cnt <= widx) 1298 return -EINVAL; 1299 1300 /* 1301 * Retrieve the memory window config to make sure the passed arguments 1302 * fit it restrictions 1303 */ 1304 mw_cfg = &ndev->mws[widx]; 1305 if (!IS_ALIGNED(addr, mw_cfg->addr_align)) 1306 return -EINVAL; 1307 if (!IS_ALIGNED(size, mw_cfg->size_align) || size > mw_cfg->size_max) 1308 return -EINVAL; 1309 1310 /* DIR and LUT based translations are initialized differently */ 1311 if (mw_cfg->type == IDT_MW_DIR) { 1312 const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar]; 1313 u64 limit; 1314 /* Set destination partition of translation */ 1315 data = idt_nt_read(ndev, bar->setup); 1316 data = SET_FIELD(BARSETUP_TPART, data, ndev->peers[pidx].part); 1317 idt_nt_write(ndev, bar->setup, data); 1318 /* Set translation base address */ 1319 idt_nt_write(ndev, bar->ltbase, (u32)addr); 1320 idt_nt_write(ndev, bar->utbase, (u32)(addr >> 32)); 1321 /* Set the custom BAR aperture limit */ 1322 limit = pci_bus_address(ntb->pdev, mw_cfg->bar) + size; 1323 idt_nt_write(ndev, bar->limit, (u32)limit); 1324 if (IS_FLD_SET(BARSETUP_TYPE, data, 64)) 1325 idt_nt_write(ndev, (bar + 1)->limit, (limit >> 32)); 1326 } else { 1327 unsigned long irqflags; 1328 /* Initialize corresponding LUT entry */ 1329 lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) | 1330 SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar); 1331 data = SET_FIELD(LUTUDATA_PART, 0, ndev->peers[pidx].part) | 1332 IDT_LUTUDATA_VALID; 1333 spin_lock_irqsave(&ndev->lut_lock, irqflags); 1334 idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff); 1335 idt_nt_write(ndev, IDT_NT_LUTLDATA, (u32)addr); 1336 idt_nt_write(ndev, IDT_NT_LUTMDATA, (u32)(addr >> 32)); 1337 idt_nt_write(ndev, IDT_NT_LUTUDATA, data); 1338 spin_unlock_irqrestore(&ndev->lut_lock, irqflags); 1339 /* Limit address isn't specified since size is fixed for LUT */ 1340 } 1341 1342 return 0; 1343 } 1344 1345 /* 1346 * idt_ntb_peer_mw_clear_trans() - clear the outbound MW translation address 1347 * (NTB API callback) 1348 * @ntb: NTB device context. 1349 * @pidx: Port index of peer device. 1350 * @widx: Memory window index. 1351 * 1352 * It effectively disables the translation over the specified outbound MW. 1353 * 1354 * Return: Zero on success, otherwise an error number. 1355 */ 1356 static int idt_ntb_peer_mw_clear_trans(struct ntb_dev *ntb, int pidx, 1357 int widx) 1358 { 1359 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1360 struct idt_mw_cfg *mw_cfg; 1361 1362 if (pidx < 0 || ndev->peer_cnt <= pidx) 1363 return -EINVAL; 1364 1365 if (widx < 0 || ndev->mw_cnt <= widx) 1366 return -EINVAL; 1367 1368 mw_cfg = &ndev->mws[widx]; 1369 1370 /* DIR and LUT based translations are initialized differently */ 1371 if (mw_cfg->type == IDT_MW_DIR) { 1372 const struct idt_ntb_bar *bar = &ntdata_tbl.bars[mw_cfg->bar]; 1373 u32 data; 1374 /* Read BARSETUP to check BAR type */ 1375 data = idt_nt_read(ndev, bar->setup); 1376 /* Disable translation by specifying zero BAR limit */ 1377 idt_nt_write(ndev, bar->limit, 0); 1378 if (IS_FLD_SET(BARSETUP_TYPE, data, 64)) 1379 idt_nt_write(ndev, (bar + 1)->limit, 0); 1380 } else { 1381 unsigned long irqflags; 1382 u32 lutoff; 1383 /* Clear the corresponding LUT entry up */ 1384 lutoff = SET_FIELD(LUTOFFSET_INDEX, 0, mw_cfg->idx) | 1385 SET_FIELD(LUTOFFSET_BAR, 0, mw_cfg->bar); 1386 spin_lock_irqsave(&ndev->lut_lock, irqflags); 1387 idt_nt_write(ndev, IDT_NT_LUTOFFSET, lutoff); 1388 idt_nt_write(ndev, IDT_NT_LUTLDATA, 0); 1389 idt_nt_write(ndev, IDT_NT_LUTMDATA, 0); 1390 idt_nt_write(ndev, IDT_NT_LUTUDATA, 0); 1391 spin_unlock_irqrestore(&ndev->lut_lock, irqflags); 1392 } 1393 1394 return 0; 1395 } 1396 1397 /*============================================================================= 1398 * 5. Doorbell operations 1399 * 1400 * Doorbell functionality of IDT PCIe-switches is pretty unusual. First of 1401 * all there is global doorbell register which state can be changed by any 1402 * NT-function of the IDT device in accordance with global permissions. These 1403 * permissions configs are not supported by NTB API, so it must be done by 1404 * either BIOS or EEPROM settings. In the same way the state of the global 1405 * doorbell is reflected to the NT-functions local inbound doorbell registers. 1406 * It can lead to situations when client driver sets some peer doorbell bits 1407 * and get them bounced back to local inbound doorbell if permissions are 1408 * granted. 1409 * Secondly there is just one IRQ vector for Doorbell, Message, Temperature 1410 * and Switch events, so if client driver left any of Doorbell bits set and 1411 * some other event occurred, the driver will be notified of Doorbell event 1412 * again. 1413 *============================================================================= 1414 */ 1415 1416 /* 1417 * idt_db_isr() - doorbell event ISR 1418 * @ndev: IDT NTB hardware driver descriptor 1419 * @ntint_sts: NT-function interrupt status 1420 * 1421 * Doorbell event happans when DBELL bit of NTINTSTS switches from 0 to 1. 1422 * It happens only when unmasked doorbell bits are set to ones on completely 1423 * zeroed doorbell register. 1424 * The method is called from PCIe ISR bottom-half routine. 1425 */ 1426 static void idt_db_isr(struct idt_ntb_dev *ndev, u32 ntint_sts) 1427 { 1428 /* 1429 * Doorbell IRQ status will be cleaned only when client 1430 * driver unsets all the doorbell bits. 1431 */ 1432 dev_dbg(&ndev->ntb.pdev->dev, "DB IRQ detected %#08x", ntint_sts); 1433 1434 /* Notify the client driver of possible doorbell state change */ 1435 ntb_db_event(&ndev->ntb, 0); 1436 } 1437 1438 /* 1439 * idt_ntb_db_valid_mask() - get a mask of doorbell bits supported by the ntb 1440 * (NTB API callback) 1441 * @ntb: NTB device context. 1442 * 1443 * IDT PCIe-switches expose just one Doorbell register of DWORD size. 1444 * 1445 * Return: A mask of doorbell bits supported by the ntb. 1446 */ 1447 static u64 idt_ntb_db_valid_mask(struct ntb_dev *ntb) 1448 { 1449 return IDT_DBELL_MASK; 1450 } 1451 1452 /* 1453 * idt_ntb_db_read() - read the local doorbell register (NTB API callback) 1454 * @ntb: NTB device context. 1455 * 1456 * There is just on inbound doorbell register of each NT-function, so 1457 * this method return it value. 1458 * 1459 * Return: The bits currently set in the local doorbell register. 1460 */ 1461 static u64 idt_ntb_db_read(struct ntb_dev *ntb) 1462 { 1463 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1464 1465 return idt_nt_read(ndev, IDT_NT_INDBELLSTS); 1466 } 1467 1468 /* 1469 * idt_ntb_db_clear() - clear bits in the local doorbell register 1470 * (NTB API callback) 1471 * @ntb: NTB device context. 1472 * @db_bits: Doorbell bits to clear. 1473 * 1474 * Clear bits of inbound doorbell register by writing ones to it. 1475 * 1476 * NOTE! Invalid bits are always considered cleared so it's not an error 1477 * to clear them over. 1478 * 1479 * Return: always zero as success. 1480 */ 1481 static int idt_ntb_db_clear(struct ntb_dev *ntb, u64 db_bits) 1482 { 1483 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1484 1485 idt_nt_write(ndev, IDT_NT_INDBELLSTS, (u32)db_bits); 1486 1487 return 0; 1488 } 1489 1490 /* 1491 * idt_ntb_db_read_mask() - read the local doorbell mask (NTB API callback) 1492 * @ntb: NTB device context. 1493 * 1494 * Each inbound doorbell bit can be masked from generating IRQ by setting 1495 * the corresponding bit in inbound doorbell mask. So this method returns 1496 * the value of the register. 1497 * 1498 * Return: The bits currently set in the local doorbell mask register. 1499 */ 1500 static u64 idt_ntb_db_read_mask(struct ntb_dev *ntb) 1501 { 1502 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1503 1504 return idt_nt_read(ndev, IDT_NT_INDBELLMSK); 1505 } 1506 1507 /* 1508 * idt_ntb_db_set_mask() - set bits in the local doorbell mask 1509 * (NTB API callback) 1510 * @ntb: NTB device context. 1511 * @db_bits: Doorbell mask bits to set. 1512 * 1513 * The inbound doorbell register mask value must be read, then OR'ed with 1514 * passed field and only then set back. 1515 * 1516 * Return: zero on success, negative error if invalid argument passed. 1517 */ 1518 static int idt_ntb_db_set_mask(struct ntb_dev *ntb, u64 db_bits) 1519 { 1520 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1521 1522 return idt_reg_set_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock, 1523 IDT_DBELL_MASK, db_bits); 1524 } 1525 1526 /* 1527 * idt_ntb_db_clear_mask() - clear bits in the local doorbell mask 1528 * (NTB API callback) 1529 * @ntb: NTB device context. 1530 * @db_bits: Doorbell bits to clear. 1531 * 1532 * The method just clears the set bits up in accordance with the passed 1533 * bitfield. IDT PCIe-switch shall generate an interrupt if there hasn't 1534 * been any unmasked bit set before current unmasking. Otherwise IRQ won't 1535 * be generated since there is only one IRQ vector for all doorbells. 1536 * 1537 * Return: always zero as success 1538 */ 1539 static int idt_ntb_db_clear_mask(struct ntb_dev *ntb, u64 db_bits) 1540 { 1541 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1542 1543 idt_reg_clear_bits(ndev, IDT_NT_INDBELLMSK, &ndev->db_mask_lock, 1544 db_bits); 1545 1546 return 0; 1547 } 1548 1549 /* 1550 * idt_ntb_peer_db_set() - set bits in the peer doorbell register 1551 * (NTB API callback) 1552 * @ntb: NTB device context. 1553 * @db_bits: Doorbell bits to set. 1554 * 1555 * IDT PCIe-switches exposes local outbound doorbell register to change peer 1556 * inbound doorbell register state. 1557 * 1558 * Return: zero on success, negative error if invalid argument passed. 1559 */ 1560 static int idt_ntb_peer_db_set(struct ntb_dev *ntb, u64 db_bits) 1561 { 1562 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1563 1564 if (db_bits & ~(u64)IDT_DBELL_MASK) 1565 return -EINVAL; 1566 1567 idt_nt_write(ndev, IDT_NT_OUTDBELLSET, (u32)db_bits); 1568 return 0; 1569 } 1570 1571 /*============================================================================= 1572 * 6. Messaging operations 1573 * 1574 * Each NT-function of IDT PCIe-switch has four inbound and four outbound 1575 * message registers. Each outbound message register can be connected to one or 1576 * even more than one peer inbound message registers by setting global 1577 * configurations. Since NTB API permits one-on-one message registers mapping 1578 * only, the driver acts in according with that restriction. 1579 *============================================================================= 1580 */ 1581 1582 /* 1583 * idt_init_msg() - initialize messaging interface 1584 * @ndev: IDT NTB hardware driver descriptor 1585 * 1586 * Just initialize the message registers routing tables locker. 1587 */ 1588 static void idt_init_msg(struct idt_ntb_dev *ndev) 1589 { 1590 unsigned char midx; 1591 1592 /* Init the messages routing table lockers */ 1593 for (midx = 0; midx < IDT_MSG_CNT; midx++) 1594 spin_lock_init(&ndev->msg_locks[midx]); 1595 1596 dev_dbg(&ndev->ntb.pdev->dev, "NTB Messaging initialized"); 1597 } 1598 1599 /* 1600 * idt_msg_isr() - message event ISR 1601 * @ndev: IDT NTB hardware driver descriptor 1602 * @ntint_sts: NT-function interrupt status 1603 * 1604 * Message event happens when MSG bit of NTINTSTS switches from 0 to 1. 1605 * It happens only when unmasked message status bits are set to ones on 1606 * completely zeroed message status register. 1607 * The method is called from PCIe ISR bottom-half routine. 1608 */ 1609 static void idt_msg_isr(struct idt_ntb_dev *ndev, u32 ntint_sts) 1610 { 1611 /* 1612 * Message IRQ status will be cleaned only when client 1613 * driver unsets all the message status bits. 1614 */ 1615 dev_dbg(&ndev->ntb.pdev->dev, "Message IRQ detected %#08x", ntint_sts); 1616 1617 /* Notify the client driver of possible message status change */ 1618 ntb_msg_event(&ndev->ntb); 1619 } 1620 1621 /* 1622 * idt_ntb_msg_count() - get the number of message registers (NTB API callback) 1623 * @ntb: NTB device context. 1624 * 1625 * IDT PCIe-switches support four message registers. 1626 * 1627 * Return: the number of message registers. 1628 */ 1629 static int idt_ntb_msg_count(struct ntb_dev *ntb) 1630 { 1631 return IDT_MSG_CNT; 1632 } 1633 1634 /* 1635 * idt_ntb_msg_inbits() - get a bitfield of inbound message registers status 1636 * (NTB API callback) 1637 * @ntb: NTB device context. 1638 * 1639 * NT message status register is shared between inbound and outbound message 1640 * registers status 1641 * 1642 * Return: bitfield of inbound message registers. 1643 */ 1644 static u64 idt_ntb_msg_inbits(struct ntb_dev *ntb) 1645 { 1646 return (u64)IDT_INMSG_MASK; 1647 } 1648 1649 /* 1650 * idt_ntb_msg_outbits() - get a bitfield of outbound message registers status 1651 * (NTB API callback) 1652 * @ntb: NTB device context. 1653 * 1654 * NT message status register is shared between inbound and outbound message 1655 * registers status 1656 * 1657 * Return: bitfield of outbound message registers. 1658 */ 1659 static u64 idt_ntb_msg_outbits(struct ntb_dev *ntb) 1660 { 1661 return (u64)IDT_OUTMSG_MASK; 1662 } 1663 1664 /* 1665 * idt_ntb_msg_read_sts() - read the message registers status (NTB API callback) 1666 * @ntb: NTB device context. 1667 * 1668 * IDT PCIe-switches expose message status registers to notify drivers of 1669 * incoming data and failures in case if peer message register isn't freed. 1670 * 1671 * Return: status bits of message registers 1672 */ 1673 static u64 idt_ntb_msg_read_sts(struct ntb_dev *ntb) 1674 { 1675 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1676 1677 return idt_nt_read(ndev, IDT_NT_MSGSTS); 1678 } 1679 1680 /* 1681 * idt_ntb_msg_clear_sts() - clear status bits of message registers 1682 * (NTB API callback) 1683 * @ntb: NTB device context. 1684 * @sts_bits: Status bits to clear. 1685 * 1686 * Clear bits in the status register by writing ones. 1687 * 1688 * NOTE! Invalid bits are always considered cleared so it's not an error 1689 * to clear them over. 1690 * 1691 * Return: always zero as success. 1692 */ 1693 static int idt_ntb_msg_clear_sts(struct ntb_dev *ntb, u64 sts_bits) 1694 { 1695 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1696 1697 idt_nt_write(ndev, IDT_NT_MSGSTS, sts_bits); 1698 1699 return 0; 1700 } 1701 1702 /* 1703 * idt_ntb_msg_set_mask() - set mask of message register status bits 1704 * (NTB API callback) 1705 * @ntb: NTB device context. 1706 * @mask_bits: Mask bits. 1707 * 1708 * Mask the message status bits from raising an IRQ. 1709 * 1710 * Return: zero on success, negative error if invalid argument passed. 1711 */ 1712 static int idt_ntb_msg_set_mask(struct ntb_dev *ntb, u64 mask_bits) 1713 { 1714 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1715 1716 return idt_reg_set_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock, 1717 IDT_MSG_MASK, mask_bits); 1718 } 1719 1720 /* 1721 * idt_ntb_msg_clear_mask() - clear message registers mask 1722 * (NTB API callback) 1723 * @ntb: NTB device context. 1724 * @mask_bits: Mask bits. 1725 * 1726 * Clear mask of message status bits IRQs. 1727 * 1728 * Return: always zero as success. 1729 */ 1730 static int idt_ntb_msg_clear_mask(struct ntb_dev *ntb, u64 mask_bits) 1731 { 1732 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1733 1734 idt_reg_clear_bits(ndev, IDT_NT_MSGSTSMSK, &ndev->msg_mask_lock, 1735 mask_bits); 1736 1737 return 0; 1738 } 1739 1740 /* 1741 * idt_ntb_msg_read() - read message register with specified index 1742 * (NTB API callback) 1743 * @ntb: NTB device context. 1744 * @pidx: OUT - Port index of peer device a message retrieved from 1745 * @midx: Message register index 1746 * 1747 * Read data from the specified message register and source register. 1748 * 1749 * Return: inbound message register value. 1750 */ 1751 static u32 idt_ntb_msg_read(struct ntb_dev *ntb, int *pidx, int midx) 1752 { 1753 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1754 1755 if (midx < 0 || IDT_MSG_CNT <= midx) 1756 return ~(u32)0; 1757 1758 /* Retrieve source port index of the message */ 1759 if (pidx != NULL) { 1760 u32 srcpart; 1761 1762 srcpart = idt_nt_read(ndev, ntdata_tbl.msgs[midx].src); 1763 *pidx = ndev->part_idx_map[srcpart]; 1764 1765 /* Sanity check partition index (for initial case) */ 1766 if (*pidx == -EINVAL) 1767 *pidx = 0; 1768 } 1769 1770 /* Retrieve data of the corresponding message register */ 1771 return idt_nt_read(ndev, ntdata_tbl.msgs[midx].in); 1772 } 1773 1774 /* 1775 * idt_ntb_peer_msg_write() - write data to the specified message register 1776 * (NTB API callback) 1777 * @ntb: NTB device context. 1778 * @pidx: Port index of peer device a message being sent to 1779 * @midx: Message register index 1780 * @msg: Data to send 1781 * 1782 * Just try to send data to a peer. Message status register should be 1783 * checked by client driver. 1784 * 1785 * Return: zero on success, negative error if invalid argument passed. 1786 */ 1787 static int idt_ntb_peer_msg_write(struct ntb_dev *ntb, int pidx, int midx, 1788 u32 msg) 1789 { 1790 struct idt_ntb_dev *ndev = to_ndev_ntb(ntb); 1791 unsigned long irqflags; 1792 u32 swpmsgctl = 0; 1793 1794 if (midx < 0 || IDT_MSG_CNT <= midx) 1795 return -EINVAL; 1796 1797 if (pidx < 0 || ndev->peer_cnt <= pidx) 1798 return -EINVAL; 1799 1800 /* Collect the routing information */ 1801 swpmsgctl = SET_FIELD(SWPxMSGCTL_REG, 0, midx) | 1802 SET_FIELD(SWPxMSGCTL_PART, 0, ndev->peers[pidx].part); 1803 1804 /* Lock the messages routing table of the specified register */ 1805 spin_lock_irqsave(&ndev->msg_locks[midx], irqflags); 1806 /* Set the route and send the data */ 1807 idt_sw_write(ndev, partdata_tbl[ndev->part].msgctl[midx], swpmsgctl); 1808 idt_nt_write(ndev, ntdata_tbl.msgs[midx].out, msg); 1809 /* Unlock the messages routing table */ 1810 spin_unlock_irqrestore(&ndev->msg_locks[midx], irqflags); 1811 1812 /* Client driver shall check the status register */ 1813 return 0; 1814 } 1815 1816 /*============================================================================= 1817 * 7. Temperature sensor operations 1818 * 1819 * IDT PCIe-switch has an embedded temperature sensor, which can be used to 1820 * check current chip core temperature. Since a workload environment can be 1821 * different on different platforms, an offset and ADC/filter settings can be 1822 * specified. Although the offset configuration is only exposed to the sysfs 1823 * hwmon interface at the moment. The rest of the settings can be adjusted 1824 * for instance by the BIOS/EEPROM firmware. 1825 *============================================================================= 1826 */ 1827 1828 /* 1829 * idt_get_deg() - convert millidegree Celsius value to just degree 1830 * @mdegC: IN - millidegree Celsius value 1831 * 1832 * Return: Degree corresponding to the passed millidegree value 1833 */ 1834 static inline s8 idt_get_deg(long mdegC) 1835 { 1836 return mdegC / 1000; 1837 } 1838 1839 /* 1840 * idt_get_frac() - retrieve 0/0.5 fraction of the millidegree Celsius value 1841 * @mdegC: IN - millidegree Celsius value 1842 * 1843 * Return: 0/0.5 degree fraction of the passed millidegree value 1844 */ 1845 static inline u8 idt_get_deg_frac(long mdegC) 1846 { 1847 return (mdegC % 1000) >= 500 ? 5 : 0; 1848 } 1849 1850 /* 1851 * idt_get_temp_fmt() - convert millidegree Celsius value to 0:7:1 format 1852 * @mdegC: IN - millidegree Celsius value 1853 * 1854 * Return: 0:7:1 format acceptable by the IDT temperature sensor 1855 */ 1856 static inline u8 idt_temp_get_fmt(long mdegC) 1857 { 1858 return (idt_get_deg(mdegC) << 1) | (idt_get_deg_frac(mdegC) ? 1 : 0); 1859 } 1860 1861 /* 1862 * idt_get_temp_sval() - convert temp sample to signed millidegree Celsius 1863 * @data: IN - shifted to LSB 8-bits temperature sample 1864 * 1865 * Return: signed millidegree Celsius 1866 */ 1867 static inline long idt_get_temp_sval(u32 data) 1868 { 1869 return ((s8)data / 2) * 1000 + (data & 0x1 ? 500 : 0); 1870 } 1871 1872 /* 1873 * idt_get_temp_sval() - convert temp sample to unsigned millidegree Celsius 1874 * @data: IN - shifted to LSB 8-bits temperature sample 1875 * 1876 * Return: unsigned millidegree Celsius 1877 */ 1878 static inline long idt_get_temp_uval(u32 data) 1879 { 1880 return (data / 2) * 1000 + (data & 0x1 ? 500 : 0); 1881 } 1882 1883 /* 1884 * idt_read_temp() - read temperature from chip sensor 1885 * @ntb: NTB device context. 1886 * @type: IN - type of the temperature value to read 1887 * @val: OUT - integer value of temperature in millidegree Celsius 1888 */ 1889 static void idt_read_temp(struct idt_ntb_dev *ndev, 1890 const enum idt_temp_val type, long *val) 1891 { 1892 u32 data; 1893 1894 /* Alter the temperature field in accordance with the passed type */ 1895 switch (type) { 1896 case IDT_TEMP_CUR: 1897 data = GET_FIELD(TMPSTS_TEMP, 1898 idt_sw_read(ndev, IDT_SW_TMPSTS)); 1899 break; 1900 case IDT_TEMP_LOW: 1901 data = GET_FIELD(TMPSTS_LTEMP, 1902 idt_sw_read(ndev, IDT_SW_TMPSTS)); 1903 break; 1904 case IDT_TEMP_HIGH: 1905 data = GET_FIELD(TMPSTS_HTEMP, 1906 idt_sw_read(ndev, IDT_SW_TMPSTS)); 1907 break; 1908 case IDT_TEMP_OFFSET: 1909 /* This is the only field with signed 0:7:1 format */ 1910 data = GET_FIELD(TMPADJ_OFFSET, 1911 idt_sw_read(ndev, IDT_SW_TMPADJ)); 1912 *val = idt_get_temp_sval(data); 1913 return; 1914 default: 1915 data = GET_FIELD(TMPSTS_TEMP, 1916 idt_sw_read(ndev, IDT_SW_TMPSTS)); 1917 break; 1918 } 1919 1920 /* The rest of the fields accept unsigned 0:7:1 format */ 1921 *val = idt_get_temp_uval(data); 1922 } 1923 1924 /* 1925 * idt_write_temp() - write temperature to the chip sensor register 1926 * @ntb: NTB device context. 1927 * @type: IN - type of the temperature value to change 1928 * @val: IN - integer value of temperature in millidegree Celsius 1929 */ 1930 static void idt_write_temp(struct idt_ntb_dev *ndev, 1931 const enum idt_temp_val type, const long val) 1932 { 1933 unsigned int reg; 1934 u32 data; 1935 u8 fmt; 1936 1937 /* Retrieve the properly formatted temperature value */ 1938 fmt = idt_temp_get_fmt(val); 1939 1940 mutex_lock(&ndev->hwmon_mtx); 1941 switch (type) { 1942 case IDT_TEMP_LOW: 1943 reg = IDT_SW_TMPALARM; 1944 data = SET_FIELD(TMPALARM_LTEMP, idt_sw_read(ndev, reg), fmt) & 1945 ~IDT_TMPALARM_IRQ_MASK; 1946 break; 1947 case IDT_TEMP_HIGH: 1948 reg = IDT_SW_TMPALARM; 1949 data = SET_FIELD(TMPALARM_HTEMP, idt_sw_read(ndev, reg), fmt) & 1950 ~IDT_TMPALARM_IRQ_MASK; 1951 break; 1952 case IDT_TEMP_OFFSET: 1953 reg = IDT_SW_TMPADJ; 1954 data = SET_FIELD(TMPADJ_OFFSET, idt_sw_read(ndev, reg), fmt); 1955 break; 1956 default: 1957 goto inval_spin_unlock; 1958 } 1959 1960 idt_sw_write(ndev, reg, data); 1961 1962 inval_spin_unlock: 1963 mutex_unlock(&ndev->hwmon_mtx); 1964 } 1965 1966 /* 1967 * idt_sysfs_show_temp() - printout corresponding temperature value 1968 * @dev: Pointer to the NTB device structure 1969 * @da: Sensor device attribute structure 1970 * @buf: Buffer to print temperature out 1971 * 1972 * Return: Number of written symbols or negative error 1973 */ 1974 static ssize_t idt_sysfs_show_temp(struct device *dev, 1975 struct device_attribute *da, char *buf) 1976 { 1977 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 1978 struct idt_ntb_dev *ndev = dev_get_drvdata(dev); 1979 enum idt_temp_val type = attr->index; 1980 long mdeg; 1981 1982 idt_read_temp(ndev, type, &mdeg); 1983 return sprintf(buf, "%ld\n", mdeg); 1984 } 1985 1986 /* 1987 * idt_sysfs_set_temp() - set corresponding temperature value 1988 * @dev: Pointer to the NTB device structure 1989 * @da: Sensor device attribute structure 1990 * @buf: Buffer to print temperature out 1991 * @count: Size of the passed buffer 1992 * 1993 * Return: Number of written symbols or negative error 1994 */ 1995 static ssize_t idt_sysfs_set_temp(struct device *dev, 1996 struct device_attribute *da, const char *buf, 1997 size_t count) 1998 { 1999 struct sensor_device_attribute *attr = to_sensor_dev_attr(da); 2000 struct idt_ntb_dev *ndev = dev_get_drvdata(dev); 2001 enum idt_temp_val type = attr->index; 2002 long mdeg; 2003 int ret; 2004 2005 ret = kstrtol(buf, 10, &mdeg); 2006 if (ret) 2007 return ret; 2008 2009 /* Clamp the passed value in accordance with the type */ 2010 if (type == IDT_TEMP_OFFSET) 2011 mdeg = clamp_val(mdeg, IDT_TEMP_MIN_OFFSET, 2012 IDT_TEMP_MAX_OFFSET); 2013 else 2014 mdeg = clamp_val(mdeg, IDT_TEMP_MIN_MDEG, IDT_TEMP_MAX_MDEG); 2015 2016 idt_write_temp(ndev, type, mdeg); 2017 2018 return count; 2019 } 2020 2021 /* 2022 * idt_sysfs_reset_hist() - reset temperature history 2023 * @dev: Pointer to the NTB device structure 2024 * @da: Sensor device attribute structure 2025 * @buf: Buffer to print temperature out 2026 * @count: Size of the passed buffer 2027 * 2028 * Return: Number of written symbols or negative error 2029 */ 2030 static ssize_t idt_sysfs_reset_hist(struct device *dev, 2031 struct device_attribute *da, 2032 const char *buf, size_t count) 2033 { 2034 struct idt_ntb_dev *ndev = dev_get_drvdata(dev); 2035 2036 /* Just set the maximal value to the lowest temperature field and 2037 * minimal value to the highest temperature field 2038 */ 2039 idt_write_temp(ndev, IDT_TEMP_LOW, IDT_TEMP_MAX_MDEG); 2040 idt_write_temp(ndev, IDT_TEMP_HIGH, IDT_TEMP_MIN_MDEG); 2041 2042 return count; 2043 } 2044 2045 /* 2046 * Hwmon IDT sysfs attributes 2047 */ 2048 static SENSOR_DEVICE_ATTR(temp1_input, 0444, idt_sysfs_show_temp, NULL, 2049 IDT_TEMP_CUR); 2050 static SENSOR_DEVICE_ATTR(temp1_lowest, 0444, idt_sysfs_show_temp, NULL, 2051 IDT_TEMP_LOW); 2052 static SENSOR_DEVICE_ATTR(temp1_highest, 0444, idt_sysfs_show_temp, NULL, 2053 IDT_TEMP_HIGH); 2054 static SENSOR_DEVICE_ATTR(temp1_offset, 0644, idt_sysfs_show_temp, 2055 idt_sysfs_set_temp, IDT_TEMP_OFFSET); 2056 static DEVICE_ATTR(temp1_reset_history, 0200, NULL, idt_sysfs_reset_hist); 2057 2058 /* 2059 * Hwmon IDT sysfs attributes group 2060 */ 2061 static struct attribute *idt_temp_attrs[] = { 2062 &sensor_dev_attr_temp1_input.dev_attr.attr, 2063 &sensor_dev_attr_temp1_lowest.dev_attr.attr, 2064 &sensor_dev_attr_temp1_highest.dev_attr.attr, 2065 &sensor_dev_attr_temp1_offset.dev_attr.attr, 2066 &dev_attr_temp1_reset_history.attr, 2067 NULL 2068 }; 2069 ATTRIBUTE_GROUPS(idt_temp); 2070 2071 /* 2072 * idt_init_temp() - initialize temperature sensor interface 2073 * @ndev: IDT NTB hardware driver descriptor 2074 * 2075 * Simple sensor initializarion method is responsible for device switching 2076 * on and resource management based hwmon interface registration. Note, that 2077 * since the device is shared we won't disable it on remove, but leave it 2078 * working until the system is powered off. 2079 */ 2080 static void idt_init_temp(struct idt_ntb_dev *ndev) 2081 { 2082 struct device *hwmon; 2083 2084 /* Enable sensor if it hasn't been already */ 2085 idt_sw_write(ndev, IDT_SW_TMPCTL, 0x0); 2086 2087 /* Initialize hwmon interface fields */ 2088 mutex_init(&ndev->hwmon_mtx); 2089 2090 hwmon = devm_hwmon_device_register_with_groups(&ndev->ntb.pdev->dev, 2091 ndev->swcfg->name, ndev, idt_temp_groups); 2092 if (IS_ERR(hwmon)) { 2093 dev_err(&ndev->ntb.pdev->dev, "Couldn't create hwmon device"); 2094 return; 2095 } 2096 2097 dev_dbg(&ndev->ntb.pdev->dev, "Temperature HWmon interface registered"); 2098 } 2099 2100 /*============================================================================= 2101 * 8. ISRs related operations 2102 * 2103 * IDT PCIe-switch has strangely developed IRQ system. There is just one 2104 * interrupt vector for doorbell and message registers. So the hardware driver 2105 * can't determine actual source of IRQ if, for example, message event happened 2106 * while any of unmasked doorbell is still set. The similar situation may be if 2107 * switch or temperature sensor events pop up. The difference is that SEVENT 2108 * and TMPSENSOR bits of NT interrupt status register can be cleaned by 2109 * IRQ handler so a next interrupt request won't have false handling of 2110 * corresponding events. 2111 * The hardware driver has only bottom-half handler of the IRQ, since if any 2112 * of events happened the device won't raise it again before the last one is 2113 * handled by clearing of corresponding NTINTSTS bit. 2114 *============================================================================= 2115 */ 2116 2117 static irqreturn_t idt_thread_isr(int irq, void *devid); 2118 2119 /* 2120 * idt_init_isr() - initialize PCIe interrupt handler 2121 * @ndev: IDT NTB hardware driver descriptor 2122 * 2123 * Return: zero on success, otherwise a negative error number. 2124 */ 2125 static int idt_init_isr(struct idt_ntb_dev *ndev) 2126 { 2127 struct pci_dev *pdev = ndev->ntb.pdev; 2128 u32 ntint_mask; 2129 int ret; 2130 2131 /* Allocate just one interrupt vector for the ISR */ 2132 ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI | PCI_IRQ_LEGACY); 2133 if (ret != 1) { 2134 dev_err(&pdev->dev, "Failed to allocate IRQ vector"); 2135 return ret; 2136 } 2137 2138 /* Retrieve the IRQ vector */ 2139 ret = pci_irq_vector(pdev, 0); 2140 if (ret < 0) { 2141 dev_err(&pdev->dev, "Failed to get IRQ vector"); 2142 goto err_free_vectors; 2143 } 2144 2145 /* Set the IRQ handler */ 2146 ret = devm_request_threaded_irq(&pdev->dev, ret, NULL, idt_thread_isr, 2147 IRQF_ONESHOT, NTB_IRQNAME, ndev); 2148 if (ret != 0) { 2149 dev_err(&pdev->dev, "Failed to set MSI IRQ handler, %d", ret); 2150 goto err_free_vectors; 2151 } 2152 2153 /* Unmask Message/Doorbell/SE interrupts */ 2154 ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) & ~IDT_NTINTMSK_ALL; 2155 idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask); 2156 2157 /* From now on the interrupts are enabled */ 2158 dev_dbg(&pdev->dev, "NTB interrupts initialized"); 2159 2160 return 0; 2161 2162 err_free_vectors: 2163 pci_free_irq_vectors(pdev); 2164 2165 return ret; 2166 } 2167 2168 /* 2169 * idt_deinit_ist() - deinitialize PCIe interrupt handler 2170 * @ndev: IDT NTB hardware driver descriptor 2171 * 2172 * Disable corresponding interrupts and free allocated IRQ vectors. 2173 */ 2174 static void idt_deinit_isr(struct idt_ntb_dev *ndev) 2175 { 2176 struct pci_dev *pdev = ndev->ntb.pdev; 2177 u32 ntint_mask; 2178 2179 /* Mask interrupts back */ 2180 ntint_mask = idt_nt_read(ndev, IDT_NT_NTINTMSK) | IDT_NTINTMSK_ALL; 2181 idt_nt_write(ndev, IDT_NT_NTINTMSK, ntint_mask); 2182 2183 /* Manually free IRQ otherwise PCI free irq vectors will fail */ 2184 devm_free_irq(&pdev->dev, pci_irq_vector(pdev, 0), ndev); 2185 2186 /* Free allocated IRQ vectors */ 2187 pci_free_irq_vectors(pdev); 2188 2189 dev_dbg(&pdev->dev, "NTB interrupts deinitialized"); 2190 } 2191 2192 /* 2193 * idt_thread_isr() - NT function interrupts handler 2194 * @irq: IRQ number 2195 * @devid: Custom buffer 2196 * 2197 * It reads current NT interrupts state register and handles all the event 2198 * it declares. 2199 * The method is bottom-half routine of actual default PCIe IRQ handler. 2200 */ 2201 static irqreturn_t idt_thread_isr(int irq, void *devid) 2202 { 2203 struct idt_ntb_dev *ndev = devid; 2204 bool handled = false; 2205 u32 ntint_sts; 2206 2207 /* Read the NT interrupts status register */ 2208 ntint_sts = idt_nt_read(ndev, IDT_NT_NTINTSTS); 2209 2210 /* Handle messaging interrupts */ 2211 if (ntint_sts & IDT_NTINTSTS_MSG) { 2212 idt_msg_isr(ndev, ntint_sts); 2213 handled = true; 2214 } 2215 2216 /* Handle doorbell interrupts */ 2217 if (ntint_sts & IDT_NTINTSTS_DBELL) { 2218 idt_db_isr(ndev, ntint_sts); 2219 handled = true; 2220 } 2221 2222 /* Handle switch event interrupts */ 2223 if (ntint_sts & IDT_NTINTSTS_SEVENT) { 2224 idt_se_isr(ndev, ntint_sts); 2225 handled = true; 2226 } 2227 2228 dev_dbg(&ndev->ntb.pdev->dev, "IDT IRQs 0x%08x handled", ntint_sts); 2229 2230 return handled ? IRQ_HANDLED : IRQ_NONE; 2231 } 2232 2233 /*=========================================================================== 2234 * 9. NTB hardware driver initialization 2235 *=========================================================================== 2236 */ 2237 2238 /* 2239 * NTB API operations 2240 */ 2241 static const struct ntb_dev_ops idt_ntb_ops = { 2242 .port_number = idt_ntb_port_number, 2243 .peer_port_count = idt_ntb_peer_port_count, 2244 .peer_port_number = idt_ntb_peer_port_number, 2245 .peer_port_idx = idt_ntb_peer_port_idx, 2246 .link_is_up = idt_ntb_link_is_up, 2247 .link_enable = idt_ntb_link_enable, 2248 .link_disable = idt_ntb_link_disable, 2249 .mw_count = idt_ntb_mw_count, 2250 .mw_get_align = idt_ntb_mw_get_align, 2251 .peer_mw_count = idt_ntb_peer_mw_count, 2252 .peer_mw_get_addr = idt_ntb_peer_mw_get_addr, 2253 .peer_mw_set_trans = idt_ntb_peer_mw_set_trans, 2254 .peer_mw_clear_trans = idt_ntb_peer_mw_clear_trans, 2255 .db_valid_mask = idt_ntb_db_valid_mask, 2256 .db_read = idt_ntb_db_read, 2257 .db_clear = idt_ntb_db_clear, 2258 .db_read_mask = idt_ntb_db_read_mask, 2259 .db_set_mask = idt_ntb_db_set_mask, 2260 .db_clear_mask = idt_ntb_db_clear_mask, 2261 .peer_db_set = idt_ntb_peer_db_set, 2262 .msg_count = idt_ntb_msg_count, 2263 .msg_inbits = idt_ntb_msg_inbits, 2264 .msg_outbits = idt_ntb_msg_outbits, 2265 .msg_read_sts = idt_ntb_msg_read_sts, 2266 .msg_clear_sts = idt_ntb_msg_clear_sts, 2267 .msg_set_mask = idt_ntb_msg_set_mask, 2268 .msg_clear_mask = idt_ntb_msg_clear_mask, 2269 .msg_read = idt_ntb_msg_read, 2270 .peer_msg_write = idt_ntb_peer_msg_write 2271 }; 2272 2273 /* 2274 * idt_register_device() - register IDT NTB device 2275 * @ndev: IDT NTB hardware driver descriptor 2276 * 2277 * Return: zero on success, otherwise a negative error number. 2278 */ 2279 static int idt_register_device(struct idt_ntb_dev *ndev) 2280 { 2281 int ret; 2282 2283 /* Initialize the rest of NTB device structure and register it */ 2284 ndev->ntb.ops = &idt_ntb_ops; 2285 ndev->ntb.topo = NTB_TOPO_SWITCH; 2286 2287 ret = ntb_register_device(&ndev->ntb); 2288 if (ret != 0) { 2289 dev_err(&ndev->ntb.pdev->dev, "Failed to register NTB device"); 2290 return ret; 2291 } 2292 2293 dev_dbg(&ndev->ntb.pdev->dev, "NTB device successfully registered"); 2294 2295 return 0; 2296 } 2297 2298 /* 2299 * idt_unregister_device() - unregister IDT NTB device 2300 * @ndev: IDT NTB hardware driver descriptor 2301 */ 2302 static void idt_unregister_device(struct idt_ntb_dev *ndev) 2303 { 2304 /* Just unregister the NTB device */ 2305 ntb_unregister_device(&ndev->ntb); 2306 2307 dev_dbg(&ndev->ntb.pdev->dev, "NTB device unregistered"); 2308 } 2309 2310 /*============================================================================= 2311 * 10. DebugFS node initialization 2312 *============================================================================= 2313 */ 2314 2315 static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf, 2316 size_t count, loff_t *offp); 2317 2318 /* 2319 * Driver DebugFS info file operations 2320 */ 2321 static const struct file_operations idt_dbgfs_info_ops = { 2322 .owner = THIS_MODULE, 2323 .open = simple_open, 2324 .read = idt_dbgfs_info_read 2325 }; 2326 2327 /* 2328 * idt_dbgfs_info_read() - DebugFS read info node callback 2329 * @file: File node descriptor. 2330 * @ubuf: User-space buffer to put data to 2331 * @count: Size of the buffer 2332 * @offp: Offset within the buffer 2333 */ 2334 static ssize_t idt_dbgfs_info_read(struct file *filp, char __user *ubuf, 2335 size_t count, loff_t *offp) 2336 { 2337 struct idt_ntb_dev *ndev = filp->private_data; 2338 unsigned char idx, pidx, cnt; 2339 unsigned long irqflags, mdeg; 2340 ssize_t ret = 0, off = 0; 2341 enum ntb_speed speed; 2342 enum ntb_width width; 2343 char *strbuf; 2344 size_t size; 2345 u32 data; 2346 2347 /* Lets limit the buffer size the way the Intel/AMD drivers do */ 2348 size = min_t(size_t, count, 0x1000U); 2349 2350 /* Allocate the memory for the buffer */ 2351 strbuf = kmalloc(size, GFP_KERNEL); 2352 if (strbuf == NULL) 2353 return -ENOMEM; 2354 2355 /* Put the data into the string buffer */ 2356 off += scnprintf(strbuf + off, size - off, 2357 "\n\t\tIDT NTB device Information:\n\n"); 2358 2359 /* General local device configurations */ 2360 off += scnprintf(strbuf + off, size - off, 2361 "Local Port %hhu, Partition %hhu\n", ndev->port, ndev->part); 2362 2363 /* Peer ports information */ 2364 off += scnprintf(strbuf + off, size - off, "Peers:\n"); 2365 for (idx = 0; idx < ndev->peer_cnt; idx++) { 2366 off += scnprintf(strbuf + off, size - off, 2367 "\t%hhu. Port %hhu, Partition %hhu\n", 2368 idx, ndev->peers[idx].port, ndev->peers[idx].part); 2369 } 2370 2371 /* Links status */ 2372 data = idt_ntb_link_is_up(&ndev->ntb, &speed, &width); 2373 off += scnprintf(strbuf + off, size - off, 2374 "NTB link status\t- 0x%08x, ", data); 2375 off += scnprintf(strbuf + off, size - off, "PCIe Gen %d x%d lanes\n", 2376 speed, width); 2377 2378 /* Mapping table entries */ 2379 off += scnprintf(strbuf + off, size - off, "NTB Mapping Table:\n"); 2380 for (idx = 0; idx < IDT_MTBL_ENTRY_CNT; idx++) { 2381 spin_lock_irqsave(&ndev->mtbl_lock, irqflags); 2382 idt_nt_write(ndev, IDT_NT_NTMTBLADDR, idx); 2383 data = idt_nt_read(ndev, IDT_NT_NTMTBLDATA); 2384 spin_unlock_irqrestore(&ndev->mtbl_lock, irqflags); 2385 2386 /* Print valid entries only */ 2387 if (data & IDT_NTMTBLDATA_VALID) { 2388 off += scnprintf(strbuf + off, size - off, 2389 "\t%hhu. Partition %d, Requester ID 0x%04x\n", 2390 idx, GET_FIELD(NTMTBLDATA_PART, data), 2391 GET_FIELD(NTMTBLDATA_REQID, data)); 2392 } 2393 } 2394 off += scnprintf(strbuf + off, size - off, "\n"); 2395 2396 /* Outbound memory windows information */ 2397 off += scnprintf(strbuf + off, size - off, 2398 "Outbound Memory Windows:\n"); 2399 for (idx = 0; idx < ndev->mw_cnt; idx += cnt) { 2400 data = ndev->mws[idx].type; 2401 cnt = idt_get_mw_count(data); 2402 2403 /* Print Memory Window information */ 2404 if (data == IDT_MW_DIR) 2405 off += scnprintf(strbuf + off, size - off, 2406 "\t%hhu.\t", idx); 2407 else 2408 off += scnprintf(strbuf + off, size - off, 2409 "\t%hhu-%d.\t", idx, idx + cnt - 1); 2410 2411 off += scnprintf(strbuf + off, size - off, "%s BAR%hhu, ", 2412 idt_get_mw_name(data), ndev->mws[idx].bar); 2413 2414 off += scnprintf(strbuf + off, size - off, 2415 "Address align 0x%08llx, ", ndev->mws[idx].addr_align); 2416 2417 off += scnprintf(strbuf + off, size - off, 2418 "Size align 0x%08llx, Size max %llu\n", 2419 ndev->mws[idx].size_align, ndev->mws[idx].size_max); 2420 } 2421 2422 /* Inbound memory windows information */ 2423 for (pidx = 0; pidx < ndev->peer_cnt; pidx++) { 2424 off += scnprintf(strbuf + off, size - off, 2425 "Inbound Memory Windows for peer %hhu (Port %hhu):\n", 2426 pidx, ndev->peers[pidx].port); 2427 2428 /* Print Memory Windows information */ 2429 for (idx = 0; idx < ndev->peers[pidx].mw_cnt; idx += cnt) { 2430 data = ndev->peers[pidx].mws[idx].type; 2431 cnt = idt_get_mw_count(data); 2432 2433 if (data == IDT_MW_DIR) 2434 off += scnprintf(strbuf + off, size - off, 2435 "\t%hhu.\t", idx); 2436 else 2437 off += scnprintf(strbuf + off, size - off, 2438 "\t%hhu-%d.\t", idx, idx + cnt - 1); 2439 2440 off += scnprintf(strbuf + off, size - off, 2441 "%s BAR%hhu, ", idt_get_mw_name(data), 2442 ndev->peers[pidx].mws[idx].bar); 2443 2444 off += scnprintf(strbuf + off, size - off, 2445 "Address align 0x%08llx, ", 2446 ndev->peers[pidx].mws[idx].addr_align); 2447 2448 off += scnprintf(strbuf + off, size - off, 2449 "Size align 0x%08llx, Size max %llu\n", 2450 ndev->peers[pidx].mws[idx].size_align, 2451 ndev->peers[pidx].mws[idx].size_max); 2452 } 2453 } 2454 off += scnprintf(strbuf + off, size - off, "\n"); 2455 2456 /* Doorbell information */ 2457 data = idt_sw_read(ndev, IDT_SW_GDBELLSTS); 2458 off += scnprintf(strbuf + off, size - off, 2459 "Global Doorbell state\t- 0x%08x\n", data); 2460 data = idt_ntb_db_read(&ndev->ntb); 2461 off += scnprintf(strbuf + off, size - off, 2462 "Local Doorbell state\t- 0x%08x\n", data); 2463 data = idt_nt_read(ndev, IDT_NT_INDBELLMSK); 2464 off += scnprintf(strbuf + off, size - off, 2465 "Local Doorbell mask\t- 0x%08x\n", data); 2466 off += scnprintf(strbuf + off, size - off, "\n"); 2467 2468 /* Messaging information */ 2469 off += scnprintf(strbuf + off, size - off, 2470 "Message event valid\t- 0x%08x\n", IDT_MSG_MASK); 2471 data = idt_ntb_msg_read_sts(&ndev->ntb); 2472 off += scnprintf(strbuf + off, size - off, 2473 "Message event status\t- 0x%08x\n", data); 2474 data = idt_nt_read(ndev, IDT_NT_MSGSTSMSK); 2475 off += scnprintf(strbuf + off, size - off, 2476 "Message event mask\t- 0x%08x\n", data); 2477 off += scnprintf(strbuf + off, size - off, 2478 "Message data:\n"); 2479 for (idx = 0; idx < IDT_MSG_CNT; idx++) { 2480 int src; 2481 data = idt_ntb_msg_read(&ndev->ntb, &src, idx); 2482 off += scnprintf(strbuf + off, size - off, 2483 "\t%hhu. 0x%08x from peer %d (Port %hhu)\n", 2484 idx, data, src, ndev->peers[src].port); 2485 } 2486 off += scnprintf(strbuf + off, size - off, "\n"); 2487 2488 /* Current temperature */ 2489 idt_read_temp(ndev, IDT_TEMP_CUR, &mdeg); 2490 off += scnprintf(strbuf + off, size - off, 2491 "Switch temperature\t\t- %hhd.%hhuC\n", 2492 idt_get_deg(mdeg), idt_get_deg_frac(mdeg)); 2493 2494 /* Copy the buffer to the User Space */ 2495 ret = simple_read_from_buffer(ubuf, count, offp, strbuf, off); 2496 kfree(strbuf); 2497 2498 return ret; 2499 } 2500 2501 /* 2502 * idt_init_dbgfs() - initialize DebugFS node 2503 * @ndev: IDT NTB hardware driver descriptor 2504 * 2505 * Return: zero on success, otherwise a negative error number. 2506 */ 2507 static int idt_init_dbgfs(struct idt_ntb_dev *ndev) 2508 { 2509 char devname[64]; 2510 2511 /* If the top directory is not created then do nothing */ 2512 if (IS_ERR_OR_NULL(dbgfs_topdir)) { 2513 dev_info(&ndev->ntb.pdev->dev, "Top DebugFS directory absent"); 2514 return PTR_ERR_OR_ZERO(dbgfs_topdir); 2515 } 2516 2517 /* Create the info file node */ 2518 snprintf(devname, 64, "info:%s", pci_name(ndev->ntb.pdev)); 2519 ndev->dbgfs_info = debugfs_create_file(devname, 0400, dbgfs_topdir, 2520 ndev, &idt_dbgfs_info_ops); 2521 if (IS_ERR(ndev->dbgfs_info)) { 2522 dev_dbg(&ndev->ntb.pdev->dev, "Failed to create DebugFS node"); 2523 return PTR_ERR(ndev->dbgfs_info); 2524 } 2525 2526 dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node created"); 2527 2528 return 0; 2529 } 2530 2531 /* 2532 * idt_deinit_dbgfs() - deinitialize DebugFS node 2533 * @ndev: IDT NTB hardware driver descriptor 2534 * 2535 * Just discard the info node from DebugFS 2536 */ 2537 static void idt_deinit_dbgfs(struct idt_ntb_dev *ndev) 2538 { 2539 debugfs_remove(ndev->dbgfs_info); 2540 2541 dev_dbg(&ndev->ntb.pdev->dev, "NTB device DebugFS node discarded"); 2542 } 2543 2544 /*============================================================================= 2545 * 11. Basic PCIe device initialization 2546 *============================================================================= 2547 */ 2548 2549 /* 2550 * idt_check_setup() - Check whether the IDT PCIe-swtich is properly 2551 * pre-initialized 2552 * @pdev: Pointer to the PCI device descriptor 2553 * 2554 * Return: zero on success, otherwise a negative error number. 2555 */ 2556 static int idt_check_setup(struct pci_dev *pdev) 2557 { 2558 u32 data; 2559 int ret; 2560 2561 /* Read the BARSETUP0 */ 2562 ret = pci_read_config_dword(pdev, IDT_NT_BARSETUP0, &data); 2563 if (ret != 0) { 2564 dev_err(&pdev->dev, 2565 "Failed to read BARSETUP0 config register"); 2566 return ret; 2567 } 2568 2569 /* Check whether the BAR0 register is enabled to be of config space */ 2570 if (!(data & IDT_BARSETUP_EN) || !(data & IDT_BARSETUP_MODE_CFG)) { 2571 dev_err(&pdev->dev, "BAR0 doesn't map config space"); 2572 return -EINVAL; 2573 } 2574 2575 /* Configuration space BAR0 must have certain size */ 2576 if ((data & IDT_BARSETUP_SIZE_MASK) != IDT_BARSETUP_SIZE_CFG) { 2577 dev_err(&pdev->dev, "Invalid size of config space"); 2578 return -EINVAL; 2579 } 2580 2581 dev_dbg(&pdev->dev, "NTB device pre-initialized correctly"); 2582 2583 return 0; 2584 } 2585 2586 /* 2587 * Create the IDT PCIe-switch driver descriptor 2588 * @pdev: Pointer to the PCI device descriptor 2589 * @id: IDT PCIe-device configuration 2590 * 2591 * It just allocates a memory for IDT PCIe-switch device structure and 2592 * initializes some commonly used fields. 2593 * 2594 * No need of release method, since managed device resource is used for 2595 * memory allocation. 2596 * 2597 * Return: pointer to the descriptor, otherwise a negative error number. 2598 */ 2599 static struct idt_ntb_dev *idt_create_dev(struct pci_dev *pdev, 2600 const struct pci_device_id *id) 2601 { 2602 struct idt_ntb_dev *ndev; 2603 2604 /* Allocate memory for the IDT PCIe-device descriptor */ 2605 ndev = devm_kzalloc(&pdev->dev, sizeof(*ndev), GFP_KERNEL); 2606 if (!ndev) { 2607 dev_err(&pdev->dev, "Memory allocation failed for descriptor"); 2608 return ERR_PTR(-ENOMEM); 2609 } 2610 2611 /* Save the IDT PCIe-switch ports configuration */ 2612 ndev->swcfg = (struct idt_89hpes_cfg *)id->driver_data; 2613 /* Save the PCI-device pointer inside the NTB device structure */ 2614 ndev->ntb.pdev = pdev; 2615 2616 /* Initialize spin locker of Doorbell, Message and GASA registers */ 2617 spin_lock_init(&ndev->db_mask_lock); 2618 spin_lock_init(&ndev->msg_mask_lock); 2619 spin_lock_init(&ndev->gasa_lock); 2620 2621 dev_info(&pdev->dev, "IDT %s discovered", ndev->swcfg->name); 2622 2623 dev_dbg(&pdev->dev, "NTB device descriptor created"); 2624 2625 return ndev; 2626 } 2627 2628 /* 2629 * idt_init_pci() - initialize the basic PCI-related subsystem 2630 * @ndev: Pointer to the IDT PCIe-switch driver descriptor 2631 * 2632 * Managed device resources will be freed automatically in case of failure or 2633 * driver detachment. 2634 * 2635 * Return: zero on success, otherwise negative error number. 2636 */ 2637 static int idt_init_pci(struct idt_ntb_dev *ndev) 2638 { 2639 struct pci_dev *pdev = ndev->ntb.pdev; 2640 int ret; 2641 2642 /* Initialize the bit mask of PCI/NTB DMA */ 2643 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); 2644 if (ret != 0) { 2645 ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); 2646 if (ret != 0) { 2647 dev_err(&pdev->dev, "Failed to set DMA bit mask\n"); 2648 return ret; 2649 } 2650 dev_warn(&pdev->dev, "Cannot set DMA highmem bit mask\n"); 2651 } 2652 2653 /* 2654 * Enable the device advanced error reporting. It's not critical to 2655 * have AER disabled in the kernel. 2656 */ 2657 ret = pci_enable_pcie_error_reporting(pdev); 2658 if (ret != 0) 2659 dev_warn(&pdev->dev, "PCIe AER capability disabled\n"); 2660 else /* Cleanup nonfatal error status before getting to init */ 2661 pci_aer_clear_nonfatal_status(pdev); 2662 2663 /* First enable the PCI device */ 2664 ret = pcim_enable_device(pdev); 2665 if (ret != 0) { 2666 dev_err(&pdev->dev, "Failed to enable PCIe device\n"); 2667 goto err_disable_aer; 2668 } 2669 2670 /* 2671 * Enable the bus mastering, which effectively enables MSI IRQs and 2672 * Request TLPs translation 2673 */ 2674 pci_set_master(pdev); 2675 2676 /* Request all BARs resources and map BAR0 only */ 2677 ret = pcim_iomap_regions_request_all(pdev, 1, NTB_NAME); 2678 if (ret != 0) { 2679 dev_err(&pdev->dev, "Failed to request resources\n"); 2680 goto err_clear_master; 2681 } 2682 2683 /* Retrieve virtual address of BAR0 - PCI configuration space */ 2684 ndev->cfgspc = pcim_iomap_table(pdev)[0]; 2685 2686 /* Put the IDT driver data pointer to the PCI-device private pointer */ 2687 pci_set_drvdata(pdev, ndev); 2688 2689 dev_dbg(&pdev->dev, "NT-function PCIe interface initialized"); 2690 2691 return 0; 2692 2693 err_clear_master: 2694 pci_clear_master(pdev); 2695 err_disable_aer: 2696 (void)pci_disable_pcie_error_reporting(pdev); 2697 2698 return ret; 2699 } 2700 2701 /* 2702 * idt_deinit_pci() - deinitialize the basic PCI-related subsystem 2703 * @ndev: Pointer to the IDT PCIe-switch driver descriptor 2704 * 2705 * Managed resources will be freed on the driver detachment 2706 */ 2707 static void idt_deinit_pci(struct idt_ntb_dev *ndev) 2708 { 2709 struct pci_dev *pdev = ndev->ntb.pdev; 2710 2711 /* Clean up the PCI-device private data pointer */ 2712 pci_set_drvdata(pdev, NULL); 2713 2714 /* Clear the bus master disabling the Request TLPs translation */ 2715 pci_clear_master(pdev); 2716 2717 /* Disable the AER capability */ 2718 (void)pci_disable_pcie_error_reporting(pdev); 2719 2720 dev_dbg(&pdev->dev, "NT-function PCIe interface cleared"); 2721 } 2722 2723 /*=========================================================================== 2724 * 12. PCI bus callback functions 2725 *=========================================================================== 2726 */ 2727 2728 /* 2729 * idt_pci_probe() - PCI device probe callback 2730 * @pdev: Pointer to PCI device structure 2731 * @id: PCIe device custom descriptor 2732 * 2733 * Return: zero on success, otherwise negative error number 2734 */ 2735 static int idt_pci_probe(struct pci_dev *pdev, 2736 const struct pci_device_id *id) 2737 { 2738 struct idt_ntb_dev *ndev; 2739 int ret; 2740 2741 /* Check whether IDT PCIe-switch is properly pre-initialized */ 2742 ret = idt_check_setup(pdev); 2743 if (ret != 0) 2744 return ret; 2745 2746 /* Allocate the memory for IDT NTB device data */ 2747 ndev = idt_create_dev(pdev, id); 2748 if (IS_ERR(ndev)) 2749 return PTR_ERR(ndev); 2750 2751 /* Initialize the basic PCI subsystem of the device */ 2752 ret = idt_init_pci(ndev); 2753 if (ret != 0) 2754 return ret; 2755 2756 /* Scan ports of the IDT PCIe-switch */ 2757 (void)idt_scan_ports(ndev); 2758 2759 /* Initialize NTB link events subsystem */ 2760 idt_init_link(ndev); 2761 2762 /* Initialize MWs subsystem */ 2763 ret = idt_init_mws(ndev); 2764 if (ret != 0) 2765 goto err_deinit_link; 2766 2767 /* Initialize Messaging subsystem */ 2768 idt_init_msg(ndev); 2769 2770 /* Initialize hwmon interface */ 2771 idt_init_temp(ndev); 2772 2773 /* Initialize IDT interrupts handler */ 2774 ret = idt_init_isr(ndev); 2775 if (ret != 0) 2776 goto err_deinit_link; 2777 2778 /* Register IDT NTB devices on the NTB bus */ 2779 ret = idt_register_device(ndev); 2780 if (ret != 0) 2781 goto err_deinit_isr; 2782 2783 /* Initialize DebugFS info node */ 2784 (void)idt_init_dbgfs(ndev); 2785 2786 /* IDT PCIe-switch NTB driver is finally initialized */ 2787 dev_info(&pdev->dev, "IDT NTB device is ready"); 2788 2789 /* May the force be with us... */ 2790 return 0; 2791 2792 err_deinit_isr: 2793 idt_deinit_isr(ndev); 2794 err_deinit_link: 2795 idt_deinit_link(ndev); 2796 idt_deinit_pci(ndev); 2797 2798 return ret; 2799 } 2800 2801 /* 2802 * idt_pci_probe() - PCI device remove callback 2803 * @pdev: Pointer to PCI device structure 2804 */ 2805 static void idt_pci_remove(struct pci_dev *pdev) 2806 { 2807 struct idt_ntb_dev *ndev = pci_get_drvdata(pdev); 2808 2809 /* Deinit the DebugFS node */ 2810 idt_deinit_dbgfs(ndev); 2811 2812 /* Unregister NTB device */ 2813 idt_unregister_device(ndev); 2814 2815 /* Stop the interrupts handling */ 2816 idt_deinit_isr(ndev); 2817 2818 /* Deinitialize link event subsystem */ 2819 idt_deinit_link(ndev); 2820 2821 /* Deinit basic PCI subsystem */ 2822 idt_deinit_pci(ndev); 2823 2824 /* IDT PCIe-switch NTB driver is finally initialized */ 2825 dev_info(&pdev->dev, "IDT NTB device is removed"); 2826 2827 /* Sayonara... */ 2828 } 2829 2830 /* 2831 * IDT PCIe-switch models ports configuration structures 2832 */ 2833 static const struct idt_89hpes_cfg idt_89hpes24nt6ag2_config = { 2834 .name = "89HPES24NT6AG2", 2835 .port_cnt = 6, .ports = {0, 2, 4, 6, 8, 12} 2836 }; 2837 static const struct idt_89hpes_cfg idt_89hpes32nt8ag2_config = { 2838 .name = "89HPES32NT8AG2", 2839 .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20} 2840 }; 2841 static const struct idt_89hpes_cfg idt_89hpes32nt8bg2_config = { 2842 .name = "89HPES32NT8BG2", 2843 .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20} 2844 }; 2845 static const struct idt_89hpes_cfg idt_89hpes12nt12g2_config = { 2846 .name = "89HPES12NT12G2", 2847 .port_cnt = 3, .ports = {0, 8, 16} 2848 }; 2849 static const struct idt_89hpes_cfg idt_89hpes16nt16g2_config = { 2850 .name = "89HPES16NT16G2", 2851 .port_cnt = 4, .ports = {0, 8, 12, 16} 2852 }; 2853 static const struct idt_89hpes_cfg idt_89hpes24nt24g2_config = { 2854 .name = "89HPES24NT24G2", 2855 .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20} 2856 }; 2857 static const struct idt_89hpes_cfg idt_89hpes32nt24ag2_config = { 2858 .name = "89HPES32NT24AG2", 2859 .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20} 2860 }; 2861 static const struct idt_89hpes_cfg idt_89hpes32nt24bg2_config = { 2862 .name = "89HPES32NT24BG2", 2863 .port_cnt = 8, .ports = {0, 2, 4, 6, 8, 12, 16, 20} 2864 }; 2865 2866 /* 2867 * PCI-ids table of the supported IDT PCIe-switch devices 2868 */ 2869 static const struct pci_device_id idt_pci_tbl[] = { 2870 {IDT_PCI_DEVICE_IDS(89HPES24NT6AG2, idt_89hpes24nt6ag2_config)}, 2871 {IDT_PCI_DEVICE_IDS(89HPES32NT8AG2, idt_89hpes32nt8ag2_config)}, 2872 {IDT_PCI_DEVICE_IDS(89HPES32NT8BG2, idt_89hpes32nt8bg2_config)}, 2873 {IDT_PCI_DEVICE_IDS(89HPES12NT12G2, idt_89hpes12nt12g2_config)}, 2874 {IDT_PCI_DEVICE_IDS(89HPES16NT16G2, idt_89hpes16nt16g2_config)}, 2875 {IDT_PCI_DEVICE_IDS(89HPES24NT24G2, idt_89hpes24nt24g2_config)}, 2876 {IDT_PCI_DEVICE_IDS(89HPES32NT24AG2, idt_89hpes32nt24ag2_config)}, 2877 {IDT_PCI_DEVICE_IDS(89HPES32NT24BG2, idt_89hpes32nt24bg2_config)}, 2878 {0} 2879 }; 2880 MODULE_DEVICE_TABLE(pci, idt_pci_tbl); 2881 2882 /* 2883 * IDT PCIe-switch NT-function device driver structure definition 2884 */ 2885 static struct pci_driver idt_pci_driver = { 2886 .name = KBUILD_MODNAME, 2887 .probe = idt_pci_probe, 2888 .remove = idt_pci_remove, 2889 .id_table = idt_pci_tbl, 2890 }; 2891 2892 static int __init idt_pci_driver_init(void) 2893 { 2894 pr_info("%s %s\n", NTB_DESC, NTB_VER); 2895 2896 /* Create the top DebugFS directory if the FS is initialized */ 2897 if (debugfs_initialized()) 2898 dbgfs_topdir = debugfs_create_dir(KBUILD_MODNAME, NULL); 2899 2900 /* Register the NTB hardware driver to handle the PCI device */ 2901 return pci_register_driver(&idt_pci_driver); 2902 } 2903 module_init(idt_pci_driver_init); 2904 2905 static void __exit idt_pci_driver_exit(void) 2906 { 2907 /* Unregister the NTB hardware driver */ 2908 pci_unregister_driver(&idt_pci_driver); 2909 2910 /* Discard the top DebugFS directory */ 2911 debugfs_remove_recursive(dbgfs_topdir); 2912 } 2913 module_exit(idt_pci_driver_exit); 2914 2915