xref: /openbmc/linux/drivers/nfc/s3fwrn5/i2c.c (revision dc6a81c3)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * I2C Link Layer for Samsung S3FWRN5 NCI based Driver
4  *
5  * Copyright (C) 2015 Samsung Electrnoics
6  * Robert Baldyga <r.baldyga@samsung.com>
7  */
8 
9 #include <linux/i2c.h>
10 #include <linux/gpio.h>
11 #include <linux/delay.h>
12 #include <linux/of_gpio.h>
13 #include <linux/of_irq.h>
14 #include <linux/module.h>
15 
16 #include <net/nfc/nfc.h>
17 
18 #include "s3fwrn5.h"
19 
20 #define S3FWRN5_I2C_DRIVER_NAME "s3fwrn5_i2c"
21 
22 #define S3FWRN5_I2C_MAX_PAYLOAD 32
23 #define S3FWRN5_EN_WAIT_TIME 150
24 
25 struct s3fwrn5_i2c_phy {
26 	struct i2c_client *i2c_dev;
27 	struct nci_dev *ndev;
28 
29 	unsigned int gpio_en;
30 	unsigned int gpio_fw_wake;
31 
32 	struct mutex mutex;
33 
34 	enum s3fwrn5_mode mode;
35 	unsigned int irq_skip:1;
36 };
37 
38 static void s3fwrn5_i2c_set_wake(void *phy_id, bool wake)
39 {
40 	struct s3fwrn5_i2c_phy *phy = phy_id;
41 
42 	mutex_lock(&phy->mutex);
43 	gpio_set_value(phy->gpio_fw_wake, wake);
44 	msleep(S3FWRN5_EN_WAIT_TIME/2);
45 	mutex_unlock(&phy->mutex);
46 }
47 
48 static void s3fwrn5_i2c_set_mode(void *phy_id, enum s3fwrn5_mode mode)
49 {
50 	struct s3fwrn5_i2c_phy *phy = phy_id;
51 
52 	mutex_lock(&phy->mutex);
53 
54 	if (phy->mode == mode)
55 		goto out;
56 
57 	phy->mode = mode;
58 
59 	gpio_set_value(phy->gpio_en, 1);
60 	gpio_set_value(phy->gpio_fw_wake, 0);
61 	if (mode == S3FWRN5_MODE_FW)
62 		gpio_set_value(phy->gpio_fw_wake, 1);
63 
64 	if (mode != S3FWRN5_MODE_COLD) {
65 		msleep(S3FWRN5_EN_WAIT_TIME);
66 		gpio_set_value(phy->gpio_en, 0);
67 		msleep(S3FWRN5_EN_WAIT_TIME/2);
68 	}
69 
70 	phy->irq_skip = true;
71 
72 out:
73 	mutex_unlock(&phy->mutex);
74 }
75 
76 static enum s3fwrn5_mode s3fwrn5_i2c_get_mode(void *phy_id)
77 {
78 	struct s3fwrn5_i2c_phy *phy = phy_id;
79 	enum s3fwrn5_mode mode;
80 
81 	mutex_lock(&phy->mutex);
82 
83 	mode = phy->mode;
84 
85 	mutex_unlock(&phy->mutex);
86 
87 	return mode;
88 }
89 
90 static int s3fwrn5_i2c_write(void *phy_id, struct sk_buff *skb)
91 {
92 	struct s3fwrn5_i2c_phy *phy = phy_id;
93 	int ret;
94 
95 	mutex_lock(&phy->mutex);
96 
97 	phy->irq_skip = false;
98 
99 	ret = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
100 	if (ret == -EREMOTEIO) {
101 		/* Retry, chip was in standby */
102 		usleep_range(110000, 120000);
103 		ret  = i2c_master_send(phy->i2c_dev, skb->data, skb->len);
104 	}
105 
106 	mutex_unlock(&phy->mutex);
107 
108 	if (ret < 0)
109 		return ret;
110 
111 	if (ret != skb->len)
112 		return -EREMOTEIO;
113 
114 	return 0;
115 }
116 
117 static const struct s3fwrn5_phy_ops i2c_phy_ops = {
118 	.set_wake = s3fwrn5_i2c_set_wake,
119 	.set_mode = s3fwrn5_i2c_set_mode,
120 	.get_mode = s3fwrn5_i2c_get_mode,
121 	.write = s3fwrn5_i2c_write,
122 };
123 
124 static int s3fwrn5_i2c_read(struct s3fwrn5_i2c_phy *phy)
125 {
126 	struct sk_buff *skb;
127 	size_t hdr_size;
128 	size_t data_len;
129 	char hdr[4];
130 	int ret;
131 
132 	hdr_size = (phy->mode == S3FWRN5_MODE_NCI) ?
133 		NCI_CTRL_HDR_SIZE : S3FWRN5_FW_HDR_SIZE;
134 	ret = i2c_master_recv(phy->i2c_dev, hdr, hdr_size);
135 	if (ret < 0)
136 		return ret;
137 
138 	if (ret < hdr_size)
139 		return -EBADMSG;
140 
141 	data_len = (phy->mode == S3FWRN5_MODE_NCI) ?
142 		((struct nci_ctrl_hdr *)hdr)->plen :
143 		((struct s3fwrn5_fw_header *)hdr)->len;
144 
145 	skb = alloc_skb(hdr_size + data_len, GFP_KERNEL);
146 	if (!skb)
147 		return -ENOMEM;
148 
149 	skb_put_data(skb, hdr, hdr_size);
150 
151 	if (data_len == 0)
152 		goto out;
153 
154 	ret = i2c_master_recv(phy->i2c_dev, skb_put(skb, data_len), data_len);
155 	if (ret != data_len) {
156 		kfree_skb(skb);
157 		return -EBADMSG;
158 	}
159 
160 out:
161 	return s3fwrn5_recv_frame(phy->ndev, skb, phy->mode);
162 }
163 
164 static irqreturn_t s3fwrn5_i2c_irq_thread_fn(int irq, void *phy_id)
165 {
166 	struct s3fwrn5_i2c_phy *phy = phy_id;
167 	int ret = 0;
168 
169 	if (!phy || !phy->ndev) {
170 		WARN_ON_ONCE(1);
171 		return IRQ_NONE;
172 	}
173 
174 	mutex_lock(&phy->mutex);
175 
176 	if (phy->irq_skip)
177 		goto out;
178 
179 	switch (phy->mode) {
180 	case S3FWRN5_MODE_NCI:
181 	case S3FWRN5_MODE_FW:
182 		ret = s3fwrn5_i2c_read(phy);
183 		break;
184 	case S3FWRN5_MODE_COLD:
185 		ret = -EREMOTEIO;
186 		break;
187 	}
188 
189 out:
190 	mutex_unlock(&phy->mutex);
191 
192 	return IRQ_HANDLED;
193 }
194 
195 static int s3fwrn5_i2c_parse_dt(struct i2c_client *client)
196 {
197 	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
198 	struct device_node *np = client->dev.of_node;
199 
200 	if (!np)
201 		return -ENODEV;
202 
203 	phy->gpio_en = of_get_named_gpio(np, "s3fwrn5,en-gpios", 0);
204 	if (!gpio_is_valid(phy->gpio_en))
205 		return -ENODEV;
206 
207 	phy->gpio_fw_wake = of_get_named_gpio(np, "s3fwrn5,fw-gpios", 0);
208 	if (!gpio_is_valid(phy->gpio_fw_wake))
209 		return -ENODEV;
210 
211 	return 0;
212 }
213 
214 static int s3fwrn5_i2c_probe(struct i2c_client *client,
215 				  const struct i2c_device_id *id)
216 {
217 	struct s3fwrn5_i2c_phy *phy;
218 	int ret;
219 
220 	phy = devm_kzalloc(&client->dev, sizeof(*phy), GFP_KERNEL);
221 	if (!phy)
222 		return -ENOMEM;
223 
224 	mutex_init(&phy->mutex);
225 	phy->mode = S3FWRN5_MODE_COLD;
226 	phy->irq_skip = true;
227 
228 	phy->i2c_dev = client;
229 	i2c_set_clientdata(client, phy);
230 
231 	ret = s3fwrn5_i2c_parse_dt(client);
232 	if (ret < 0)
233 		return ret;
234 
235 	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_en,
236 		GPIOF_OUT_INIT_HIGH, "s3fwrn5_en");
237 	if (ret < 0)
238 		return ret;
239 
240 	ret = devm_gpio_request_one(&phy->i2c_dev->dev, phy->gpio_fw_wake,
241 		GPIOF_OUT_INIT_LOW, "s3fwrn5_fw_wake");
242 	if (ret < 0)
243 		return ret;
244 
245 	ret = s3fwrn5_probe(&phy->ndev, phy, &phy->i2c_dev->dev, &i2c_phy_ops,
246 		S3FWRN5_I2C_MAX_PAYLOAD);
247 	if (ret < 0)
248 		return ret;
249 
250 	ret = devm_request_threaded_irq(&client->dev, phy->i2c_dev->irq, NULL,
251 		s3fwrn5_i2c_irq_thread_fn, IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
252 		S3FWRN5_I2C_DRIVER_NAME, phy);
253 	if (ret)
254 		s3fwrn5_remove(phy->ndev);
255 
256 	return ret;
257 }
258 
259 static int s3fwrn5_i2c_remove(struct i2c_client *client)
260 {
261 	struct s3fwrn5_i2c_phy *phy = i2c_get_clientdata(client);
262 
263 	s3fwrn5_remove(phy->ndev);
264 
265 	return 0;
266 }
267 
268 static const struct i2c_device_id s3fwrn5_i2c_id_table[] = {
269 	{S3FWRN5_I2C_DRIVER_NAME, 0},
270 	{}
271 };
272 MODULE_DEVICE_TABLE(i2c, s3fwrn5_i2c_id_table);
273 
274 static const struct of_device_id of_s3fwrn5_i2c_match[] = {
275 	{ .compatible = "samsung,s3fwrn5-i2c", },
276 	{}
277 };
278 MODULE_DEVICE_TABLE(of, of_s3fwrn5_i2c_match);
279 
280 static struct i2c_driver s3fwrn5_i2c_driver = {
281 	.driver = {
282 		.name = S3FWRN5_I2C_DRIVER_NAME,
283 		.of_match_table = of_match_ptr(of_s3fwrn5_i2c_match),
284 	},
285 	.probe = s3fwrn5_i2c_probe,
286 	.remove = s3fwrn5_i2c_remove,
287 	.id_table = s3fwrn5_i2c_id_table,
288 };
289 
290 module_i2c_driver(s3fwrn5_i2c_driver);
291 
292 MODULE_LICENSE("GPL");
293 MODULE_DESCRIPTION("I2C driver for Samsung S3FWRN5");
294 MODULE_AUTHOR("Robert Baldyga <r.baldyga@samsung.com>");
295