xref: /openbmc/linux/drivers/nfc/nxp-nci/i2c.c (revision 384b77fd)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * I2C link layer for the NXP NCI driver
4  *
5  * Copyright (C) 2014  NXP Semiconductors  All rights reserved.
6  * Copyright (C) 2012-2015  Intel Corporation. All rights reserved.
7  *
8  * Authors: Clément Perrochaud <clement.perrochaud@nxp.com>
9  * Authors: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
10  *
11  * Derived from PN544 device driver:
12  * Copyright (C) 2012  Intel Corporation. All rights reserved.
13  */
14 
15 #include <linux/acpi.h>
16 #include <linux/delay.h>
17 #include <linux/i2c.h>
18 #include <linux/interrupt.h>
19 #include <linux/module.h>
20 #include <linux/nfc.h>
21 #include <linux/gpio/consumer.h>
22 #include <asm/unaligned.h>
23 
24 #include <net/nfc/nfc.h>
25 
26 #include "nxp-nci.h"
27 
28 #define NXP_NCI_I2C_DRIVER_NAME	"nxp-nci_i2c"
29 
30 #define NXP_NCI_I2C_MAX_PAYLOAD	32
31 
32 struct nxp_nci_i2c_phy {
33 	struct i2c_client *i2c_dev;
34 	struct nci_dev *ndev;
35 
36 	struct gpio_desc *gpiod_en;
37 	struct gpio_desc *gpiod_fw;
38 
39 	int hard_fault; /*
40 			 * < 0 if hardware error occurred (e.g. i2c err)
41 			 * and prevents normal operation.
42 			 */
43 };
44 
45 static int nxp_nci_i2c_set_mode(void *phy_id,
46 				    enum nxp_nci_mode mode)
47 {
48 	struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
49 
50 	gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
51 	gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
52 	usleep_range(10000, 15000);
53 
54 	if (mode == NXP_NCI_MODE_COLD)
55 		phy->hard_fault = 0;
56 
57 	return 0;
58 }
59 
60 static int nxp_nci_i2c_write(void *phy_id, struct sk_buff *skb)
61 {
62 	int r;
63 	struct nxp_nci_i2c_phy *phy = phy_id;
64 	struct i2c_client *client = phy->i2c_dev;
65 
66 	if (phy->hard_fault != 0)
67 		return phy->hard_fault;
68 
69 	r = i2c_master_send(client, skb->data, skb->len);
70 	if (r < 0) {
71 		/* Retry, chip was in standby */
72 		msleep(110);
73 		r = i2c_master_send(client, skb->data, skb->len);
74 	}
75 
76 	if (r < 0) {
77 		nfc_err(&client->dev, "Error %d on I2C send\n", r);
78 	} else if (r != skb->len) {
79 		nfc_err(&client->dev,
80 			"Invalid length sent: %u (expected %u)\n",
81 			r, skb->len);
82 		r = -EREMOTEIO;
83 	} else {
84 		/* Success but return 0 and not number of bytes */
85 		r = 0;
86 	}
87 
88 	return r;
89 }
90 
91 static const struct nxp_nci_phy_ops i2c_phy_ops = {
92 	.set_mode = nxp_nci_i2c_set_mode,
93 	.write = nxp_nci_i2c_write,
94 };
95 
96 static int nxp_nci_i2c_fw_read(struct nxp_nci_i2c_phy *phy,
97 			       struct sk_buff **skb)
98 {
99 	struct i2c_client *client = phy->i2c_dev;
100 	u16 header;
101 	size_t frame_len;
102 	int r;
103 
104 	r = i2c_master_recv(client, (u8 *) &header, NXP_NCI_FW_HDR_LEN);
105 	if (r < 0) {
106 		goto fw_read_exit;
107 	} else if (r != NXP_NCI_FW_HDR_LEN) {
108 		nfc_err(&client->dev, "Incorrect header length: %u\n", r);
109 		r = -EBADMSG;
110 		goto fw_read_exit;
111 	}
112 
113 	frame_len = (be16_to_cpu(header) & NXP_NCI_FW_FRAME_LEN_MASK) +
114 		    NXP_NCI_FW_CRC_LEN;
115 
116 	*skb = alloc_skb(NXP_NCI_FW_HDR_LEN + frame_len, GFP_KERNEL);
117 	if (*skb == NULL) {
118 		r = -ENOMEM;
119 		goto fw_read_exit;
120 	}
121 
122 	skb_put_data(*skb, &header, NXP_NCI_FW_HDR_LEN);
123 
124 	r = i2c_master_recv(client, skb_put(*skb, frame_len), frame_len);
125 	if (r != frame_len) {
126 		nfc_err(&client->dev,
127 			"Invalid frame length: %u (expected %zu)\n",
128 			r, frame_len);
129 		r = -EBADMSG;
130 		goto fw_read_exit_free_skb;
131 	}
132 
133 	return 0;
134 
135 fw_read_exit_free_skb:
136 	kfree_skb(*skb);
137 fw_read_exit:
138 	return r;
139 }
140 
141 static int nxp_nci_i2c_nci_read(struct nxp_nci_i2c_phy *phy,
142 				struct sk_buff **skb)
143 {
144 	struct nci_ctrl_hdr header; /* May actually be a data header */
145 	struct i2c_client *client = phy->i2c_dev;
146 	int r;
147 
148 	r = i2c_master_recv(client, (u8 *) &header, NCI_CTRL_HDR_SIZE);
149 	if (r < 0) {
150 		goto nci_read_exit;
151 	} else if (r != NCI_CTRL_HDR_SIZE) {
152 		nfc_err(&client->dev, "Incorrect header length: %u\n", r);
153 		r = -EBADMSG;
154 		goto nci_read_exit;
155 	}
156 
157 	*skb = alloc_skb(NCI_CTRL_HDR_SIZE + header.plen, GFP_KERNEL);
158 	if (*skb == NULL) {
159 		r = -ENOMEM;
160 		goto nci_read_exit;
161 	}
162 
163 	skb_put_data(*skb, (void *)&header, NCI_CTRL_HDR_SIZE);
164 
165 	r = i2c_master_recv(client, skb_put(*skb, header.plen), header.plen);
166 	if (r != header.plen) {
167 		nfc_err(&client->dev,
168 			"Invalid frame payload length: %u (expected %u)\n",
169 			r, header.plen);
170 		r = -EBADMSG;
171 		goto nci_read_exit_free_skb;
172 	}
173 
174 	return 0;
175 
176 nci_read_exit_free_skb:
177 	kfree_skb(*skb);
178 nci_read_exit:
179 	return r;
180 }
181 
182 static irqreturn_t nxp_nci_i2c_irq_thread_fn(int irq, void *phy_id)
183 {
184 	struct nxp_nci_i2c_phy *phy = phy_id;
185 	struct i2c_client *client;
186 	struct nxp_nci_info *info;
187 
188 	struct sk_buff *skb = NULL;
189 	int r = 0;
190 
191 	if (!phy || !phy->ndev)
192 		goto exit_irq_none;
193 
194 	client = phy->i2c_dev;
195 
196 	if (!client || irq != client->irq)
197 		goto exit_irq_none;
198 
199 	info = nci_get_drvdata(phy->ndev);
200 
201 	if (!info)
202 		goto exit_irq_none;
203 
204 	mutex_lock(&info->info_lock);
205 
206 	if (phy->hard_fault != 0)
207 		goto exit_irq_handled;
208 
209 	switch (info->mode) {
210 	case NXP_NCI_MODE_NCI:
211 		r = nxp_nci_i2c_nci_read(phy, &skb);
212 		break;
213 	case NXP_NCI_MODE_FW:
214 		r = nxp_nci_i2c_fw_read(phy, &skb);
215 		break;
216 	case NXP_NCI_MODE_COLD:
217 		r = -EREMOTEIO;
218 		break;
219 	}
220 
221 	if (r == -EREMOTEIO) {
222 		phy->hard_fault = r;
223 		if (info->mode == NXP_NCI_MODE_FW)
224 			nxp_nci_fw_recv_frame(phy->ndev, NULL);
225 	}
226 	if (r < 0) {
227 		nfc_err(&client->dev, "Read failed with error %d\n", r);
228 		goto exit_irq_handled;
229 	}
230 
231 	switch (info->mode) {
232 	case NXP_NCI_MODE_NCI:
233 		nci_recv_frame(phy->ndev, skb);
234 		break;
235 	case NXP_NCI_MODE_FW:
236 		nxp_nci_fw_recv_frame(phy->ndev, skb);
237 		break;
238 	case NXP_NCI_MODE_COLD:
239 		break;
240 	}
241 
242 exit_irq_handled:
243 	mutex_unlock(&info->info_lock);
244 	return IRQ_HANDLED;
245 exit_irq_none:
246 	WARN_ON_ONCE(1);
247 	return IRQ_NONE;
248 }
249 
250 static const struct acpi_gpio_params firmware_gpios = { 1, 0, false };
251 static const struct acpi_gpio_params enable_gpios = { 2, 0, false };
252 
253 static const struct acpi_gpio_mapping acpi_nxp_nci_gpios[] = {
254 	{ "enable-gpios", &enable_gpios, 1 },
255 	{ "firmware-gpios", &firmware_gpios, 1 },
256 	{ }
257 };
258 
259 static int nxp_nci_i2c_probe(struct i2c_client *client,
260 			    const struct i2c_device_id *id)
261 {
262 	struct device *dev = &client->dev;
263 	struct nxp_nci_i2c_phy *phy;
264 	int r;
265 
266 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
267 		nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
268 		return -ENODEV;
269 	}
270 
271 	phy = devm_kzalloc(&client->dev, sizeof(struct nxp_nci_i2c_phy),
272 			   GFP_KERNEL);
273 	if (!phy)
274 		return -ENOMEM;
275 
276 	phy->i2c_dev = client;
277 	i2c_set_clientdata(client, phy);
278 
279 	r = devm_acpi_dev_add_driver_gpios(dev, acpi_nxp_nci_gpios);
280 	if (r)
281 		dev_dbg(dev, "Unable to add GPIO mapping table\n");
282 
283 	phy->gpiod_en = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
284 	if (IS_ERR(phy->gpiod_en)) {
285 		nfc_err(dev, "Failed to get EN gpio\n");
286 		return PTR_ERR(phy->gpiod_en);
287 	}
288 
289 	phy->gpiod_fw = devm_gpiod_get_optional(dev, "firmware", GPIOD_OUT_LOW);
290 	if (IS_ERR(phy->gpiod_fw)) {
291 		nfc_err(dev, "Failed to get FW gpio\n");
292 		return PTR_ERR(phy->gpiod_fw);
293 	}
294 
295 	r = nxp_nci_probe(phy, &client->dev, &i2c_phy_ops,
296 			  NXP_NCI_I2C_MAX_PAYLOAD, &phy->ndev);
297 	if (r < 0)
298 		return r;
299 
300 	r = request_threaded_irq(client->irq, NULL,
301 				 nxp_nci_i2c_irq_thread_fn,
302 				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
303 				 NXP_NCI_I2C_DRIVER_NAME, phy);
304 	if (r < 0)
305 		nfc_err(&client->dev, "Unable to register IRQ handler\n");
306 
307 	return r;
308 }
309 
310 static int nxp_nci_i2c_remove(struct i2c_client *client)
311 {
312 	struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
313 
314 	nxp_nci_remove(phy->ndev);
315 	free_irq(client->irq, phy);
316 
317 	return 0;
318 }
319 
320 static const struct i2c_device_id nxp_nci_i2c_id_table[] = {
321 	{"nxp-nci_i2c", 0},
322 	{}
323 };
324 MODULE_DEVICE_TABLE(i2c, nxp_nci_i2c_id_table);
325 
326 static const struct of_device_id of_nxp_nci_i2c_match[] = {
327 	{ .compatible = "nxp,nxp-nci-i2c", },
328 	{}
329 };
330 MODULE_DEVICE_TABLE(of, of_nxp_nci_i2c_match);
331 
332 #ifdef CONFIG_ACPI
333 static const struct acpi_device_id acpi_id[] = {
334 	{ "NXP1001" },
335 	{ "NXP7471" },
336 	{ }
337 };
338 MODULE_DEVICE_TABLE(acpi, acpi_id);
339 #endif
340 
341 static struct i2c_driver nxp_nci_i2c_driver = {
342 	.driver = {
343 		   .name = NXP_NCI_I2C_DRIVER_NAME,
344 		   .acpi_match_table = ACPI_PTR(acpi_id),
345 		   .of_match_table = of_nxp_nci_i2c_match,
346 		  },
347 	.probe = nxp_nci_i2c_probe,
348 	.id_table = nxp_nci_i2c_id_table,
349 	.remove = nxp_nci_i2c_remove,
350 };
351 
352 module_i2c_driver(nxp_nci_i2c_driver);
353 
354 MODULE_LICENSE("GPL");
355 MODULE_DESCRIPTION("I2C driver for NXP NCI NFC controllers");
356 MODULE_AUTHOR("Clément Perrochaud <clement.perrochaud@nxp.com>");
357 MODULE_AUTHOR("Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>");
358