xref: /openbmc/linux/drivers/nfc/microread/i2c.c (revision b8265621)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
4  *
5  * Copyright (C) 2013 Intel Corporation. All rights reserved.
6  */
7 
8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9 
10 #include <linux/module.h>
11 #include <linux/i2c.h>
12 #include <linux/delay.h>
13 #include <linux/slab.h>
14 #include <linux/interrupt.h>
15 #include <linux/gpio.h>
16 
17 #include <linux/nfc.h>
18 #include <net/nfc/hci.h>
19 #include <net/nfc/llc.h>
20 
21 #include "microread.h"
22 
23 #define MICROREAD_I2C_DRIVER_NAME "microread"
24 
25 #define MICROREAD_I2C_FRAME_HEADROOM 1
26 #define MICROREAD_I2C_FRAME_TAILROOM 1
27 
28 /* framing in HCI mode */
29 #define MICROREAD_I2C_LLC_LEN		1
30 #define MICROREAD_I2C_LLC_CRC		1
31 #define MICROREAD_I2C_LLC_LEN_CRC	(MICROREAD_I2C_LLC_LEN + \
32 					MICROREAD_I2C_LLC_CRC)
33 #define MICROREAD_I2C_LLC_MIN_SIZE	(1 + MICROREAD_I2C_LLC_LEN_CRC)
34 #define MICROREAD_I2C_LLC_MAX_PAYLOAD	29
35 #define MICROREAD_I2C_LLC_MAX_SIZE	(MICROREAD_I2C_LLC_LEN_CRC + 1 + \
36 					MICROREAD_I2C_LLC_MAX_PAYLOAD)
37 
38 struct microread_i2c_phy {
39 	struct i2c_client *i2c_dev;
40 	struct nfc_hci_dev *hdev;
41 
42 	int hard_fault;		/*
43 				 * < 0 if hardware error occured (e.g. i2c err)
44 				 * and prevents normal operation.
45 				 */
46 };
47 
48 #define I2C_DUMP_SKB(info, skb)					\
49 do {								\
50 	pr_debug("%s:\n", info);				\
51 	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
52 		       16, 1, (skb)->data, (skb)->len, 0);	\
53 } while (0)
54 
55 static void microread_i2c_add_len_crc(struct sk_buff *skb)
56 {
57 	int i;
58 	u8 crc = 0;
59 	int len;
60 
61 	len = skb->len;
62 	*(u8 *)skb_push(skb, 1) = len;
63 
64 	for (i = 0; i < skb->len; i++)
65 		crc = crc ^ skb->data[i];
66 
67 	skb_put_u8(skb, crc);
68 }
69 
70 static void microread_i2c_remove_len_crc(struct sk_buff *skb)
71 {
72 	skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
73 	skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
74 }
75 
76 static int check_crc(struct sk_buff *skb)
77 {
78 	int i;
79 	u8 crc = 0;
80 
81 	for (i = 0; i < skb->len - 1; i++)
82 		crc = crc ^ skb->data[i];
83 
84 	if (crc != skb->data[skb->len-1]) {
85 		pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);
86 		pr_info("%s: BAD CRC\n", __func__);
87 		return -EPERM;
88 	}
89 
90 	return 0;
91 }
92 
93 static int microread_i2c_enable(void *phy_id)
94 {
95 	return 0;
96 }
97 
98 static void microread_i2c_disable(void *phy_id)
99 {
100 	return;
101 }
102 
103 static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
104 {
105 	int r;
106 	struct microread_i2c_phy *phy = phy_id;
107 	struct i2c_client *client = phy->i2c_dev;
108 
109 	if (phy->hard_fault != 0)
110 		return phy->hard_fault;
111 
112 	usleep_range(3000, 6000);
113 
114 	microread_i2c_add_len_crc(skb);
115 
116 	I2C_DUMP_SKB("i2c frame written", skb);
117 
118 	r = i2c_master_send(client, skb->data, skb->len);
119 
120 	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
121 		usleep_range(6000, 10000);
122 		r = i2c_master_send(client, skb->data, skb->len);
123 	}
124 
125 	if (r >= 0) {
126 		if (r != skb->len)
127 			r = -EREMOTEIO;
128 		else
129 			r = 0;
130 	}
131 
132 	microread_i2c_remove_len_crc(skb);
133 
134 	return r;
135 }
136 
137 
138 static int microread_i2c_read(struct microread_i2c_phy *phy,
139 			      struct sk_buff **skb)
140 {
141 	int r;
142 	u8 len;
143 	u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
144 	struct i2c_client *client = phy->i2c_dev;
145 
146 	r = i2c_master_recv(client, &len, 1);
147 	if (r != 1) {
148 		nfc_err(&client->dev, "cannot read len byte\n");
149 		return -EREMOTEIO;
150 	}
151 
152 	if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
153 	    (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
154 		nfc_err(&client->dev, "invalid len byte\n");
155 		r = -EBADMSG;
156 		goto flush;
157 	}
158 
159 	*skb = alloc_skb(1 + len, GFP_KERNEL);
160 	if (*skb == NULL) {
161 		r = -ENOMEM;
162 		goto flush;
163 	}
164 
165 	skb_put_u8(*skb, len);
166 
167 	r = i2c_master_recv(client, skb_put(*skb, len), len);
168 	if (r != len) {
169 		kfree_skb(*skb);
170 		return -EREMOTEIO;
171 	}
172 
173 	I2C_DUMP_SKB("cc frame read", *skb);
174 
175 	r = check_crc(*skb);
176 	if (r != 0) {
177 		kfree_skb(*skb);
178 		r = -EBADMSG;
179 		goto flush;
180 	}
181 
182 	skb_pull(*skb, 1);
183 	skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
184 
185 	usleep_range(3000, 6000);
186 
187 	return 0;
188 
189 flush:
190 	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
191 		r = -EREMOTEIO;
192 
193 	usleep_range(3000, 6000);
194 
195 	return r;
196 }
197 
198 static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
199 {
200 	struct microread_i2c_phy *phy = phy_id;
201 	struct sk_buff *skb = NULL;
202 	int r;
203 
204 	if (!phy || irq != phy->i2c_dev->irq) {
205 		WARN_ON_ONCE(1);
206 		return IRQ_NONE;
207 	}
208 
209 	if (phy->hard_fault != 0)
210 		return IRQ_HANDLED;
211 
212 	r = microread_i2c_read(phy, &skb);
213 	if (r == -EREMOTEIO) {
214 		phy->hard_fault = r;
215 
216 		nfc_hci_recv_frame(phy->hdev, NULL);
217 
218 		return IRQ_HANDLED;
219 	} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
220 		return IRQ_HANDLED;
221 	}
222 
223 	nfc_hci_recv_frame(phy->hdev, skb);
224 
225 	return IRQ_HANDLED;
226 }
227 
228 static struct nfc_phy_ops i2c_phy_ops = {
229 	.write = microread_i2c_write,
230 	.enable = microread_i2c_enable,
231 	.disable = microread_i2c_disable,
232 };
233 
234 static int microread_i2c_probe(struct i2c_client *client,
235 			       const struct i2c_device_id *id)
236 {
237 	struct microread_i2c_phy *phy;
238 	int r;
239 
240 	dev_dbg(&client->dev, "client %p\n", client);
241 
242 	phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
243 			   GFP_KERNEL);
244 	if (!phy)
245 		return -ENOMEM;
246 
247 	i2c_set_clientdata(client, phy);
248 	phy->i2c_dev = client;
249 
250 	r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
251 				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
252 				 MICROREAD_I2C_DRIVER_NAME, phy);
253 	if (r) {
254 		nfc_err(&client->dev, "Unable to register IRQ handler\n");
255 		return r;
256 	}
257 
258 	r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
259 			    MICROREAD_I2C_FRAME_HEADROOM,
260 			    MICROREAD_I2C_FRAME_TAILROOM,
261 			    MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
262 	if (r < 0)
263 		goto err_irq;
264 
265 	nfc_info(&client->dev, "Probed\n");
266 
267 	return 0;
268 
269 err_irq:
270 	free_irq(client->irq, phy);
271 
272 	return r;
273 }
274 
275 static int microread_i2c_remove(struct i2c_client *client)
276 {
277 	struct microread_i2c_phy *phy = i2c_get_clientdata(client);
278 
279 	microread_remove(phy->hdev);
280 
281 	free_irq(client->irq, phy);
282 
283 	return 0;
284 }
285 
286 static const struct i2c_device_id microread_i2c_id[] = {
287 	{ MICROREAD_I2C_DRIVER_NAME, 0},
288 	{ }
289 };
290 MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
291 
292 static struct i2c_driver microread_i2c_driver = {
293 	.driver = {
294 		.name = MICROREAD_I2C_DRIVER_NAME,
295 	},
296 	.probe		= microread_i2c_probe,
297 	.remove		= microread_i2c_remove,
298 	.id_table	= microread_i2c_id,
299 };
300 
301 module_i2c_driver(microread_i2c_driver);
302 
303 MODULE_LICENSE("GPL");
304 MODULE_DESCRIPTION(DRIVER_DESC);
305