xref: /openbmc/linux/drivers/nfc/microread/i2c.c (revision 2359ccdd)
1 /*
2  * HCI based Driver for Inside Secure microread NFC Chip - i2c layer
3  *
4  * Copyright (C) 2013 Intel Corporation. All rights reserved.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, see <http://www.gnu.org/licenses/>.
17  */
18 
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 
21 #include <linux/module.h>
22 #include <linux/i2c.h>
23 #include <linux/delay.h>
24 #include <linux/slab.h>
25 #include <linux/interrupt.h>
26 #include <linux/gpio.h>
27 
28 #include <linux/nfc.h>
29 #include <net/nfc/hci.h>
30 #include <net/nfc/llc.h>
31 
32 #include "microread.h"
33 
34 #define MICROREAD_I2C_DRIVER_NAME "microread"
35 
36 #define MICROREAD_I2C_FRAME_HEADROOM 1
37 #define MICROREAD_I2C_FRAME_TAILROOM 1
38 
39 /* framing in HCI mode */
40 #define MICROREAD_I2C_LLC_LEN		1
41 #define MICROREAD_I2C_LLC_CRC		1
42 #define MICROREAD_I2C_LLC_LEN_CRC	(MICROREAD_I2C_LLC_LEN + \
43 					MICROREAD_I2C_LLC_CRC)
44 #define MICROREAD_I2C_LLC_MIN_SIZE	(1 + MICROREAD_I2C_LLC_LEN_CRC)
45 #define MICROREAD_I2C_LLC_MAX_PAYLOAD	29
46 #define MICROREAD_I2C_LLC_MAX_SIZE	(MICROREAD_I2C_LLC_LEN_CRC + 1 + \
47 					MICROREAD_I2C_LLC_MAX_PAYLOAD)
48 
49 struct microread_i2c_phy {
50 	struct i2c_client *i2c_dev;
51 	struct nfc_hci_dev *hdev;
52 
53 	int hard_fault;		/*
54 				 * < 0 if hardware error occured (e.g. i2c err)
55 				 * and prevents normal operation.
56 				 */
57 };
58 
59 #define I2C_DUMP_SKB(info, skb)					\
60 do {								\
61 	pr_debug("%s:\n", info);				\
62 	print_hex_dump(KERN_DEBUG, "i2c: ", DUMP_PREFIX_OFFSET,	\
63 		       16, 1, (skb)->data, (skb)->len, 0);	\
64 } while (0)
65 
66 static void microread_i2c_add_len_crc(struct sk_buff *skb)
67 {
68 	int i;
69 	u8 crc = 0;
70 	int len;
71 
72 	len = skb->len;
73 	*(u8 *)skb_push(skb, 1) = len;
74 
75 	for (i = 0; i < skb->len; i++)
76 		crc = crc ^ skb->data[i];
77 
78 	skb_put_u8(skb, crc);
79 }
80 
81 static void microread_i2c_remove_len_crc(struct sk_buff *skb)
82 {
83 	skb_pull(skb, MICROREAD_I2C_FRAME_HEADROOM);
84 	skb_trim(skb, MICROREAD_I2C_FRAME_TAILROOM);
85 }
86 
87 static int check_crc(struct sk_buff *skb)
88 {
89 	int i;
90 	u8 crc = 0;
91 
92 	for (i = 0; i < skb->len - 1; i++)
93 		crc = crc ^ skb->data[i];
94 
95 	if (crc != skb->data[skb->len-1]) {
96 		pr_err("CRC error 0x%x != 0x%x\n", crc, skb->data[skb->len-1]);
97 		pr_info("%s: BAD CRC\n", __func__);
98 		return -EPERM;
99 	}
100 
101 	return 0;
102 }
103 
104 static int microread_i2c_enable(void *phy_id)
105 {
106 	return 0;
107 }
108 
109 static void microread_i2c_disable(void *phy_id)
110 {
111 	return;
112 }
113 
114 static int microread_i2c_write(void *phy_id, struct sk_buff *skb)
115 {
116 	int r;
117 	struct microread_i2c_phy *phy = phy_id;
118 	struct i2c_client *client = phy->i2c_dev;
119 
120 	if (phy->hard_fault != 0)
121 		return phy->hard_fault;
122 
123 	usleep_range(3000, 6000);
124 
125 	microread_i2c_add_len_crc(skb);
126 
127 	I2C_DUMP_SKB("i2c frame written", skb);
128 
129 	r = i2c_master_send(client, skb->data, skb->len);
130 
131 	if (r == -EREMOTEIO) {	/* Retry, chip was in standby */
132 		usleep_range(6000, 10000);
133 		r = i2c_master_send(client, skb->data, skb->len);
134 	}
135 
136 	if (r >= 0) {
137 		if (r != skb->len)
138 			r = -EREMOTEIO;
139 		else
140 			r = 0;
141 	}
142 
143 	microread_i2c_remove_len_crc(skb);
144 
145 	return r;
146 }
147 
148 
149 static int microread_i2c_read(struct microread_i2c_phy *phy,
150 			      struct sk_buff **skb)
151 {
152 	int r;
153 	u8 len;
154 	u8 tmp[MICROREAD_I2C_LLC_MAX_SIZE - 1];
155 	struct i2c_client *client = phy->i2c_dev;
156 
157 	r = i2c_master_recv(client, &len, 1);
158 	if (r != 1) {
159 		nfc_err(&client->dev, "cannot read len byte\n");
160 		return -EREMOTEIO;
161 	}
162 
163 	if ((len < MICROREAD_I2C_LLC_MIN_SIZE) ||
164 	    (len > MICROREAD_I2C_LLC_MAX_SIZE)) {
165 		nfc_err(&client->dev, "invalid len byte\n");
166 		r = -EBADMSG;
167 		goto flush;
168 	}
169 
170 	*skb = alloc_skb(1 + len, GFP_KERNEL);
171 	if (*skb == NULL) {
172 		r = -ENOMEM;
173 		goto flush;
174 	}
175 
176 	skb_put_u8(*skb, len);
177 
178 	r = i2c_master_recv(client, skb_put(*skb, len), len);
179 	if (r != len) {
180 		kfree_skb(*skb);
181 		return -EREMOTEIO;
182 	}
183 
184 	I2C_DUMP_SKB("cc frame read", *skb);
185 
186 	r = check_crc(*skb);
187 	if (r != 0) {
188 		kfree_skb(*skb);
189 		r = -EBADMSG;
190 		goto flush;
191 	}
192 
193 	skb_pull(*skb, 1);
194 	skb_trim(*skb, (*skb)->len - MICROREAD_I2C_FRAME_TAILROOM);
195 
196 	usleep_range(3000, 6000);
197 
198 	return 0;
199 
200 flush:
201 	if (i2c_master_recv(client, tmp, sizeof(tmp)) < 0)
202 		r = -EREMOTEIO;
203 
204 	usleep_range(3000, 6000);
205 
206 	return r;
207 }
208 
209 static irqreturn_t microread_i2c_irq_thread_fn(int irq, void *phy_id)
210 {
211 	struct microread_i2c_phy *phy = phy_id;
212 	struct sk_buff *skb = NULL;
213 	int r;
214 
215 	if (!phy || irq != phy->i2c_dev->irq) {
216 		WARN_ON_ONCE(1);
217 		return IRQ_NONE;
218 	}
219 
220 	if (phy->hard_fault != 0)
221 		return IRQ_HANDLED;
222 
223 	r = microread_i2c_read(phy, &skb);
224 	if (r == -EREMOTEIO) {
225 		phy->hard_fault = r;
226 
227 		nfc_hci_recv_frame(phy->hdev, NULL);
228 
229 		return IRQ_HANDLED;
230 	} else if ((r == -ENOMEM) || (r == -EBADMSG)) {
231 		return IRQ_HANDLED;
232 	}
233 
234 	nfc_hci_recv_frame(phy->hdev, skb);
235 
236 	return IRQ_HANDLED;
237 }
238 
239 static struct nfc_phy_ops i2c_phy_ops = {
240 	.write = microread_i2c_write,
241 	.enable = microread_i2c_enable,
242 	.disable = microread_i2c_disable,
243 };
244 
245 static int microread_i2c_probe(struct i2c_client *client,
246 			       const struct i2c_device_id *id)
247 {
248 	struct microread_i2c_phy *phy;
249 	int r;
250 
251 	dev_dbg(&client->dev, "client %p\n", client);
252 
253 	phy = devm_kzalloc(&client->dev, sizeof(struct microread_i2c_phy),
254 			   GFP_KERNEL);
255 	if (!phy)
256 		return -ENOMEM;
257 
258 	i2c_set_clientdata(client, phy);
259 	phy->i2c_dev = client;
260 
261 	r = request_threaded_irq(client->irq, NULL, microread_i2c_irq_thread_fn,
262 				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
263 				 MICROREAD_I2C_DRIVER_NAME, phy);
264 	if (r) {
265 		nfc_err(&client->dev, "Unable to register IRQ handler\n");
266 		return r;
267 	}
268 
269 	r = microread_probe(phy, &i2c_phy_ops, LLC_SHDLC_NAME,
270 			    MICROREAD_I2C_FRAME_HEADROOM,
271 			    MICROREAD_I2C_FRAME_TAILROOM,
272 			    MICROREAD_I2C_LLC_MAX_PAYLOAD, &phy->hdev);
273 	if (r < 0)
274 		goto err_irq;
275 
276 	nfc_info(&client->dev, "Probed\n");
277 
278 	return 0;
279 
280 err_irq:
281 	free_irq(client->irq, phy);
282 
283 	return r;
284 }
285 
286 static int microread_i2c_remove(struct i2c_client *client)
287 {
288 	struct microread_i2c_phy *phy = i2c_get_clientdata(client);
289 
290 	microread_remove(phy->hdev);
291 
292 	free_irq(client->irq, phy);
293 
294 	return 0;
295 }
296 
297 static const struct i2c_device_id microread_i2c_id[] = {
298 	{ MICROREAD_I2C_DRIVER_NAME, 0},
299 	{ }
300 };
301 MODULE_DEVICE_TABLE(i2c, microread_i2c_id);
302 
303 static struct i2c_driver microread_i2c_driver = {
304 	.driver = {
305 		.name = MICROREAD_I2C_DRIVER_NAME,
306 	},
307 	.probe		= microread_i2c_probe,
308 	.remove		= microread_i2c_remove,
309 	.id_table	= microread_i2c_id,
310 };
311 
312 module_i2c_driver(microread_i2c_driver);
313 
314 MODULE_LICENSE("GPL");
315 MODULE_DESCRIPTION(DRIVER_DESC);
316