1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * This file is part of wl1271 4 * 5 * Copyright (C) 2008-2009 Nokia Corporation 6 * 7 * Contact: Luciano Coelho <luciano.coelho@nokia.com> 8 */ 9 10 #include <linux/interrupt.h> 11 #include <linux/irq.h> 12 #include <linux/module.h> 13 #include <linux/slab.h> 14 #include <linux/swab.h> 15 #include <linux/crc7.h> 16 #include <linux/spi/spi.h> 17 #include <linux/platform_device.h> 18 #include <linux/of_irq.h> 19 #include <linux/regulator/consumer.h> 20 21 #include "wlcore.h" 22 #include "wl12xx_80211.h" 23 #include "io.h" 24 25 #define WSPI_CMD_READ 0x40000000 26 #define WSPI_CMD_WRITE 0x00000000 27 #define WSPI_CMD_FIXED 0x20000000 28 #define WSPI_CMD_BYTE_LENGTH 0x1FFE0000 29 #define WSPI_CMD_BYTE_LENGTH_OFFSET 17 30 #define WSPI_CMD_BYTE_ADDR 0x0001FFFF 31 32 #define WSPI_INIT_CMD_CRC_LEN 5 33 34 #define WSPI_INIT_CMD_START 0x00 35 #define WSPI_INIT_CMD_TX 0x40 36 /* the extra bypass bit is sampled by the TNET as '1' */ 37 #define WSPI_INIT_CMD_BYPASS_BIT 0x80 38 #define WSPI_INIT_CMD_FIXEDBUSY_LEN 0x07 39 #define WSPI_INIT_CMD_EN_FIXEDBUSY 0x80 40 #define WSPI_INIT_CMD_DIS_FIXEDBUSY 0x00 41 #define WSPI_INIT_CMD_IOD 0x40 42 #define WSPI_INIT_CMD_IP 0x20 43 #define WSPI_INIT_CMD_CS 0x10 44 #define WSPI_INIT_CMD_WS 0x08 45 #define WSPI_INIT_CMD_WSPI 0x01 46 #define WSPI_INIT_CMD_END 0x01 47 48 #define WSPI_INIT_CMD_LEN 8 49 50 #define HW_ACCESS_WSPI_FIXED_BUSY_LEN \ 51 ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32)) 52 #define HW_ACCESS_WSPI_INIT_CMD_MASK 0 53 54 /* HW limitation: maximum possible chunk size is 4095 bytes */ 55 #define WSPI_MAX_CHUNK_SIZE 4092 56 57 /* 58 * wl18xx driver aggregation buffer size is (13 * 4K) compared to 59 * (4 * 4K) for wl12xx, so use the larger buffer needed for wl18xx 60 */ 61 #define SPI_AGGR_BUFFER_SIZE (13 * SZ_4K) 62 63 /* Maximum number of SPI write chunks */ 64 #define WSPI_MAX_NUM_OF_CHUNKS \ 65 ((SPI_AGGR_BUFFER_SIZE / WSPI_MAX_CHUNK_SIZE) + 1) 66 67 static const struct wilink_family_data wl127x_data = { 68 .name = "wl127x", 69 .nvs_name = "ti-connectivity/wl127x-nvs.bin", 70 }; 71 72 static const struct wilink_family_data wl128x_data = { 73 .name = "wl128x", 74 .nvs_name = "ti-connectivity/wl128x-nvs.bin", 75 }; 76 77 static const struct wilink_family_data wl18xx_data = { 78 .name = "wl18xx", 79 .cfg_name = "ti-connectivity/wl18xx-conf.bin", 80 .nvs_name = "ti-connectivity/wl1271-nvs.bin", 81 }; 82 83 struct wl12xx_spi_glue { 84 struct device *dev; 85 struct platform_device *core; 86 struct regulator *reg; /* Power regulator */ 87 }; 88 89 static void wl12xx_spi_reset(struct device *child) 90 { 91 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 92 u8 *cmd; 93 struct spi_transfer t; 94 struct spi_message m; 95 96 cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); 97 if (!cmd) { 98 dev_err(child->parent, 99 "could not allocate cmd for spi reset\n"); 100 return; 101 } 102 103 memset(&t, 0, sizeof(t)); 104 spi_message_init(&m); 105 106 memset(cmd, 0xff, WSPI_INIT_CMD_LEN); 107 108 t.tx_buf = cmd; 109 t.len = WSPI_INIT_CMD_LEN; 110 spi_message_add_tail(&t, &m); 111 112 spi_sync(to_spi_device(glue->dev), &m); 113 114 kfree(cmd); 115 } 116 117 static void wl12xx_spi_init(struct device *child) 118 { 119 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 120 struct spi_transfer t; 121 struct spi_message m; 122 struct spi_device *spi = to_spi_device(glue->dev); 123 u8 *cmd = kzalloc(WSPI_INIT_CMD_LEN, GFP_KERNEL); 124 125 if (!cmd) { 126 dev_err(child->parent, 127 "could not allocate cmd for spi init\n"); 128 return; 129 } 130 131 memset(&t, 0, sizeof(t)); 132 spi_message_init(&m); 133 134 /* 135 * Set WSPI_INIT_COMMAND 136 * the data is being send from the MSB to LSB 137 */ 138 cmd[0] = 0xff; 139 cmd[1] = 0xff; 140 cmd[2] = WSPI_INIT_CMD_START | WSPI_INIT_CMD_TX; 141 cmd[3] = 0; 142 cmd[4] = 0; 143 cmd[5] = HW_ACCESS_WSPI_INIT_CMD_MASK << 3; 144 cmd[5] |= HW_ACCESS_WSPI_FIXED_BUSY_LEN & WSPI_INIT_CMD_FIXEDBUSY_LEN; 145 146 cmd[6] = WSPI_INIT_CMD_IOD | WSPI_INIT_CMD_IP | WSPI_INIT_CMD_CS 147 | WSPI_INIT_CMD_WSPI | WSPI_INIT_CMD_WS; 148 149 if (HW_ACCESS_WSPI_FIXED_BUSY_LEN == 0) 150 cmd[6] |= WSPI_INIT_CMD_DIS_FIXEDBUSY; 151 else 152 cmd[6] |= WSPI_INIT_CMD_EN_FIXEDBUSY; 153 154 cmd[7] = crc7_be(0, cmd+2, WSPI_INIT_CMD_CRC_LEN) | WSPI_INIT_CMD_END; 155 156 /* 157 * The above is the logical order; it must actually be stored 158 * in the buffer byte-swapped. 159 */ 160 __swab32s((u32 *)cmd); 161 __swab32s((u32 *)cmd+1); 162 163 t.tx_buf = cmd; 164 t.len = WSPI_INIT_CMD_LEN; 165 spi_message_add_tail(&t, &m); 166 167 spi_sync(to_spi_device(glue->dev), &m); 168 169 /* Send extra clocks with inverted CS (high). this is required 170 * by the wilink family in order to successfully enter WSPI mode. 171 */ 172 spi->mode ^= SPI_CS_HIGH; 173 memset(&m, 0, sizeof(m)); 174 spi_message_init(&m); 175 176 cmd[0] = 0xff; 177 cmd[1] = 0xff; 178 cmd[2] = 0xff; 179 cmd[3] = 0xff; 180 __swab32s((u32 *)cmd); 181 182 t.tx_buf = cmd; 183 t.len = 4; 184 spi_message_add_tail(&t, &m); 185 186 spi_sync(to_spi_device(glue->dev), &m); 187 188 /* Restore chip select configuration to normal */ 189 spi->mode ^= SPI_CS_HIGH; 190 kfree(cmd); 191 } 192 193 #define WL1271_BUSY_WORD_TIMEOUT 1000 194 195 static int wl12xx_spi_read_busy(struct device *child) 196 { 197 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 198 struct wl1271 *wl = dev_get_drvdata(child); 199 struct spi_transfer t[1]; 200 struct spi_message m; 201 u32 *busy_buf; 202 int num_busy_bytes = 0; 203 204 /* 205 * Read further busy words from SPI until a non-busy word is 206 * encountered, then read the data itself into the buffer. 207 */ 208 209 num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT; 210 busy_buf = wl->buffer_busyword; 211 while (num_busy_bytes) { 212 num_busy_bytes--; 213 spi_message_init(&m); 214 memset(t, 0, sizeof(t)); 215 t[0].rx_buf = busy_buf; 216 t[0].len = sizeof(u32); 217 t[0].cs_change = true; 218 spi_message_add_tail(&t[0], &m); 219 spi_sync(to_spi_device(glue->dev), &m); 220 221 if (*busy_buf & 0x1) 222 return 0; 223 } 224 225 /* The SPI bus is unresponsive, the read failed. */ 226 dev_err(child->parent, "SPI read busy-word timeout!\n"); 227 return -ETIMEDOUT; 228 } 229 230 static int __must_check wl12xx_spi_raw_read(struct device *child, int addr, 231 void *buf, size_t len, bool fixed) 232 { 233 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 234 struct wl1271 *wl = dev_get_drvdata(child); 235 struct spi_transfer t[2]; 236 struct spi_message m; 237 u32 *busy_buf; 238 u32 *cmd; 239 u32 chunk_len; 240 241 while (len > 0) { 242 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len); 243 244 cmd = &wl->buffer_cmd; 245 busy_buf = wl->buffer_busyword; 246 247 *cmd = 0; 248 *cmd |= WSPI_CMD_READ; 249 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & 250 WSPI_CMD_BYTE_LENGTH; 251 *cmd |= addr & WSPI_CMD_BYTE_ADDR; 252 253 if (fixed) 254 *cmd |= WSPI_CMD_FIXED; 255 256 spi_message_init(&m); 257 memset(t, 0, sizeof(t)); 258 259 t[0].tx_buf = cmd; 260 t[0].len = 4; 261 t[0].cs_change = true; 262 spi_message_add_tail(&t[0], &m); 263 264 /* Busy and non busy words read */ 265 t[1].rx_buf = busy_buf; 266 t[1].len = WL1271_BUSY_WORD_LEN; 267 t[1].cs_change = true; 268 spi_message_add_tail(&t[1], &m); 269 270 spi_sync(to_spi_device(glue->dev), &m); 271 272 if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) && 273 wl12xx_spi_read_busy(child)) { 274 memset(buf, 0, chunk_len); 275 return 0; 276 } 277 278 spi_message_init(&m); 279 memset(t, 0, sizeof(t)); 280 281 t[0].rx_buf = buf; 282 t[0].len = chunk_len; 283 t[0].cs_change = true; 284 spi_message_add_tail(&t[0], &m); 285 286 spi_sync(to_spi_device(glue->dev), &m); 287 288 if (!fixed) 289 addr += chunk_len; 290 buf += chunk_len; 291 len -= chunk_len; 292 } 293 294 return 0; 295 } 296 297 static int __wl12xx_spi_raw_write(struct device *child, int addr, 298 void *buf, size_t len, bool fixed) 299 { 300 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 301 struct spi_transfer *t; 302 struct spi_message m; 303 u32 commands[WSPI_MAX_NUM_OF_CHUNKS]; /* 1 command per chunk */ 304 u32 *cmd; 305 u32 chunk_len; 306 int i; 307 308 /* SPI write buffers - 2 for each chunk */ 309 t = kzalloc(sizeof(*t) * 2 * WSPI_MAX_NUM_OF_CHUNKS, GFP_KERNEL); 310 if (!t) 311 return -ENOMEM; 312 313 WARN_ON(len > SPI_AGGR_BUFFER_SIZE); 314 315 spi_message_init(&m); 316 317 cmd = &commands[0]; 318 i = 0; 319 while (len > 0) { 320 chunk_len = min_t(size_t, WSPI_MAX_CHUNK_SIZE, len); 321 322 *cmd = 0; 323 *cmd |= WSPI_CMD_WRITE; 324 *cmd |= (chunk_len << WSPI_CMD_BYTE_LENGTH_OFFSET) & 325 WSPI_CMD_BYTE_LENGTH; 326 *cmd |= addr & WSPI_CMD_BYTE_ADDR; 327 328 if (fixed) 329 *cmd |= WSPI_CMD_FIXED; 330 331 t[i].tx_buf = cmd; 332 t[i].len = sizeof(*cmd); 333 spi_message_add_tail(&t[i++], &m); 334 335 t[i].tx_buf = buf; 336 t[i].len = chunk_len; 337 spi_message_add_tail(&t[i++], &m); 338 339 if (!fixed) 340 addr += chunk_len; 341 buf += chunk_len; 342 len -= chunk_len; 343 cmd++; 344 } 345 346 spi_sync(to_spi_device(glue->dev), &m); 347 348 kfree(t); 349 return 0; 350 } 351 352 static int __must_check wl12xx_spi_raw_write(struct device *child, int addr, 353 void *buf, size_t len, bool fixed) 354 { 355 /* The ELP wakeup write may fail the first time due to internal 356 * hardware latency. It is safer to send the wakeup command twice to 357 * avoid unexpected failures. 358 */ 359 if (addr == HW_ACCESS_ELP_CTRL_REG) 360 __wl12xx_spi_raw_write(child, addr, buf, len, fixed); 361 362 return __wl12xx_spi_raw_write(child, addr, buf, len, fixed); 363 } 364 365 /** 366 * wl12xx_spi_set_power - power on/off the wl12xx unit 367 * @child: wl12xx device handle. 368 * @enable: true/false to power on/off the unit. 369 * 370 * use the WiFi enable regulator to enable/disable the WiFi unit. 371 */ 372 static int wl12xx_spi_set_power(struct device *child, bool enable) 373 { 374 int ret = 0; 375 struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent); 376 377 WARN_ON(!glue->reg); 378 379 /* Update regulator state */ 380 if (enable) { 381 ret = regulator_enable(glue->reg); 382 if (ret) 383 dev_err(child, "Power enable failure\n"); 384 } else { 385 ret = regulator_disable(glue->reg); 386 if (ret) 387 dev_err(child, "Power disable failure\n"); 388 } 389 390 return ret; 391 } 392 393 /* 394 * wl12xx_spi_set_block_size 395 * 396 * This function is not needed for spi mode, but need to be present. 397 * Without it defined the wlcore fallback to use the wrong packet 398 * allignment on tx. 399 */ 400 static void wl12xx_spi_set_block_size(struct device *child, 401 unsigned int blksz) 402 { 403 } 404 405 static struct wl1271_if_operations spi_ops = { 406 .read = wl12xx_spi_raw_read, 407 .write = wl12xx_spi_raw_write, 408 .reset = wl12xx_spi_reset, 409 .init = wl12xx_spi_init, 410 .power = wl12xx_spi_set_power, 411 .set_block_size = wl12xx_spi_set_block_size, 412 }; 413 414 static const struct of_device_id wlcore_spi_of_match_table[] = { 415 { .compatible = "ti,wl1271", .data = &wl127x_data}, 416 { .compatible = "ti,wl1273", .data = &wl127x_data}, 417 { .compatible = "ti,wl1281", .data = &wl128x_data}, 418 { .compatible = "ti,wl1283", .data = &wl128x_data}, 419 { .compatible = "ti,wl1285", .data = &wl128x_data}, 420 { .compatible = "ti,wl1801", .data = &wl18xx_data}, 421 { .compatible = "ti,wl1805", .data = &wl18xx_data}, 422 { .compatible = "ti,wl1807", .data = &wl18xx_data}, 423 { .compatible = "ti,wl1831", .data = &wl18xx_data}, 424 { .compatible = "ti,wl1835", .data = &wl18xx_data}, 425 { .compatible = "ti,wl1837", .data = &wl18xx_data}, 426 { } 427 }; 428 MODULE_DEVICE_TABLE(of, wlcore_spi_of_match_table); 429 430 /** 431 * wlcore_probe_of - DT node parsing. 432 * @spi: SPI slave device parameters. 433 * @glue: wl12xx SPI bus to slave device glue parameters. 434 * @pdev_data: wlcore device parameters 435 */ 436 static int wlcore_probe_of(struct spi_device *spi, struct wl12xx_spi_glue *glue, 437 struct wlcore_platdev_data *pdev_data) 438 { 439 struct device_node *dt_node = spi->dev.of_node; 440 const struct of_device_id *of_id; 441 442 of_id = of_match_node(wlcore_spi_of_match_table, dt_node); 443 if (!of_id) 444 return -ENODEV; 445 446 pdev_data->family = of_id->data; 447 dev_info(&spi->dev, "selected chip family is %s\n", 448 pdev_data->family->name); 449 450 if (of_find_property(dt_node, "clock-xtal", NULL)) 451 pdev_data->ref_clock_xtal = true; 452 453 /* optional clock frequency params */ 454 of_property_read_u32(dt_node, "ref-clock-frequency", 455 &pdev_data->ref_clock_freq); 456 of_property_read_u32(dt_node, "tcxo-clock-frequency", 457 &pdev_data->tcxo_clock_freq); 458 459 return 0; 460 } 461 462 static int wl1271_probe(struct spi_device *spi) 463 { 464 struct wl12xx_spi_glue *glue; 465 struct wlcore_platdev_data *pdev_data; 466 struct resource res[1]; 467 int ret; 468 469 pdev_data = devm_kzalloc(&spi->dev, sizeof(*pdev_data), GFP_KERNEL); 470 if (!pdev_data) 471 return -ENOMEM; 472 473 pdev_data->if_ops = &spi_ops; 474 475 glue = devm_kzalloc(&spi->dev, sizeof(*glue), GFP_KERNEL); 476 if (!glue) { 477 dev_err(&spi->dev, "can't allocate glue\n"); 478 return -ENOMEM; 479 } 480 481 glue->dev = &spi->dev; 482 483 spi_set_drvdata(spi, glue); 484 485 /* This is the only SPI value that we need to set here, the rest 486 * comes from the board-peripherals file */ 487 spi->bits_per_word = 32; 488 489 glue->reg = devm_regulator_get(&spi->dev, "vwlan"); 490 if (IS_ERR(glue->reg)) 491 return dev_err_probe(glue->dev, PTR_ERR(glue->reg), 492 "can't get regulator\n"); 493 494 ret = wlcore_probe_of(spi, glue, pdev_data); 495 if (ret) { 496 dev_err(glue->dev, 497 "can't get device tree parameters (%d)\n", ret); 498 return ret; 499 } 500 501 ret = spi_setup(spi); 502 if (ret < 0) { 503 dev_err(glue->dev, "spi_setup failed\n"); 504 return ret; 505 } 506 507 glue->core = platform_device_alloc(pdev_data->family->name, 508 PLATFORM_DEVID_AUTO); 509 if (!glue->core) { 510 dev_err(glue->dev, "can't allocate platform_device\n"); 511 return -ENOMEM; 512 } 513 514 glue->core->dev.parent = &spi->dev; 515 516 memset(res, 0x00, sizeof(res)); 517 518 res[0].start = spi->irq; 519 res[0].flags = IORESOURCE_IRQ | irq_get_trigger_type(spi->irq); 520 res[0].name = "irq"; 521 522 ret = platform_device_add_resources(glue->core, res, ARRAY_SIZE(res)); 523 if (ret) { 524 dev_err(glue->dev, "can't add resources\n"); 525 goto out_dev_put; 526 } 527 528 ret = platform_device_add_data(glue->core, pdev_data, 529 sizeof(*pdev_data)); 530 if (ret) { 531 dev_err(glue->dev, "can't add platform data\n"); 532 goto out_dev_put; 533 } 534 535 ret = platform_device_add(glue->core); 536 if (ret) { 537 dev_err(glue->dev, "can't register platform device\n"); 538 goto out_dev_put; 539 } 540 541 return 0; 542 543 out_dev_put: 544 platform_device_put(glue->core); 545 return ret; 546 } 547 548 static void wl1271_remove(struct spi_device *spi) 549 { 550 struct wl12xx_spi_glue *glue = spi_get_drvdata(spi); 551 552 platform_device_unregister(glue->core); 553 } 554 555 static struct spi_driver wl1271_spi_driver = { 556 .driver = { 557 .name = "wl1271_spi", 558 .of_match_table = of_match_ptr(wlcore_spi_of_match_table), 559 }, 560 561 .probe = wl1271_probe, 562 .remove = wl1271_remove, 563 }; 564 565 module_spi_driver(wl1271_spi_driver); 566 MODULE_LICENSE("GPL"); 567 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); 568 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>"); 569 MODULE_ALIAS("spi:wl1271"); 570