xref: /openbmc/linux/drivers/net/wireless/ti/wlcore/boot.c (revision 9cfc5c90)
1 /*
2  * This file is part of wl1271
3  *
4  * Copyright (C) 2008-2010 Nokia Corporation
5  *
6  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  */
23 
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 
27 #include "debug.h"
28 #include "acx.h"
29 #include "boot.h"
30 #include "io.h"
31 #include "event.h"
32 #include "rx.h"
33 #include "hw_ops.h"
34 
35 static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
36 {
37 	u32 cpu_ctrl;
38 	int ret;
39 
40 	/* 10.5.0 run the firmware (I) */
41 	ret = wlcore_read_reg(wl, REG_ECPU_CONTROL, &cpu_ctrl);
42 	if (ret < 0)
43 		goto out;
44 
45 	/* 10.5.1 run the firmware (II) */
46 	cpu_ctrl |= flag;
47 	ret = wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
48 
49 out:
50 	return ret;
51 }
52 
53 static int wlcore_boot_parse_fw_ver(struct wl1271 *wl,
54 				    struct wl1271_static_data *static_data)
55 {
56 	int ret;
57 
58 	strncpy(wl->chip.fw_ver_str, static_data->fw_version,
59 		sizeof(wl->chip.fw_ver_str));
60 
61 	/* make sure the string is NULL-terminated */
62 	wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0';
63 
64 	ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u",
65 		     &wl->chip.fw_ver[0], &wl->chip.fw_ver[1],
66 		     &wl->chip.fw_ver[2], &wl->chip.fw_ver[3],
67 		     &wl->chip.fw_ver[4]);
68 
69 	if (ret != 5) {
70 		wl1271_warning("fw version incorrect value");
71 		memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
72 		ret = -EINVAL;
73 		goto out;
74 	}
75 
76 	ret = wlcore_identify_fw(wl);
77 	if (ret < 0)
78 		goto out;
79 out:
80 	return ret;
81 }
82 
83 static int wlcore_validate_fw_ver(struct wl1271 *wl)
84 {
85 	unsigned int *fw_ver = wl->chip.fw_ver;
86 	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
87 		wl->min_mr_fw_ver : wl->min_sr_fw_ver;
88 	char min_fw_str[32] = "";
89 	int i;
90 
91 	/* the chip must be exactly equal */
92 	if ((min_ver[FW_VER_CHIP] != WLCORE_FW_VER_IGNORE) &&
93 	    (min_ver[FW_VER_CHIP] != fw_ver[FW_VER_CHIP]))
94 		goto fail;
95 
96 	/* the firmware type must be equal */
97 	if ((min_ver[FW_VER_IF_TYPE] != WLCORE_FW_VER_IGNORE) &&
98 	    (min_ver[FW_VER_IF_TYPE] != fw_ver[FW_VER_IF_TYPE]))
99 		goto fail;
100 
101 	/* the project number must be equal */
102 	if ((min_ver[FW_VER_SUBTYPE] != WLCORE_FW_VER_IGNORE) &&
103 	    (min_ver[FW_VER_SUBTYPE] != fw_ver[FW_VER_SUBTYPE]))
104 		goto fail;
105 
106 	/* the API version must be greater or equal */
107 	if ((min_ver[FW_VER_MAJOR] != WLCORE_FW_VER_IGNORE) &&
108 		 (min_ver[FW_VER_MAJOR] > fw_ver[FW_VER_MAJOR]))
109 		goto fail;
110 
111 	/* if the API version is equal... */
112 	if (((min_ver[FW_VER_MAJOR] == WLCORE_FW_VER_IGNORE) ||
113 	     (min_ver[FW_VER_MAJOR] == fw_ver[FW_VER_MAJOR])) &&
114 	    /* ...the minor must be greater or equal */
115 	    ((min_ver[FW_VER_MINOR] != WLCORE_FW_VER_IGNORE) &&
116 	     (min_ver[FW_VER_MINOR] > fw_ver[FW_VER_MINOR])))
117 		goto fail;
118 
119 	return 0;
120 
121 fail:
122 	for (i = 0; i < NUM_FW_VER; i++)
123 		if (min_ver[i] == WLCORE_FW_VER_IGNORE)
124 			snprintf(min_fw_str, sizeof(min_fw_str),
125 				  "%s*.", min_fw_str);
126 		else
127 			snprintf(min_fw_str, sizeof(min_fw_str),
128 				  "%s%u.", min_fw_str, min_ver[i]);
129 
130 	wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is invalid.\n"
131 		     "Please use at least FW %s\n"
132 		     "You can get the latest firmwares at:\n"
133 		     "git://github.com/TI-OpenLink/firmwares.git",
134 		     fw_ver[FW_VER_CHIP], fw_ver[FW_VER_IF_TYPE],
135 		     fw_ver[FW_VER_MAJOR], fw_ver[FW_VER_SUBTYPE],
136 		     fw_ver[FW_VER_MINOR], min_fw_str);
137 	return -EINVAL;
138 }
139 
140 static int wlcore_boot_static_data(struct wl1271 *wl)
141 {
142 	struct wl1271_static_data *static_data;
143 	size_t len = sizeof(*static_data) + wl->static_data_priv_len;
144 	int ret;
145 
146 	static_data = kmalloc(len, GFP_KERNEL);
147 	if (!static_data) {
148 		ret = -ENOMEM;
149 		goto out;
150 	}
151 
152 	ret = wlcore_read(wl, wl->cmd_box_addr, static_data, len, false);
153 	if (ret < 0)
154 		goto out_free;
155 
156 	ret = wlcore_boot_parse_fw_ver(wl, static_data);
157 	if (ret < 0)
158 		goto out_free;
159 
160 	ret = wlcore_validate_fw_ver(wl);
161 	if (ret < 0)
162 		goto out_free;
163 
164 	ret = wlcore_handle_static_data(wl, static_data);
165 	if (ret < 0)
166 		goto out_free;
167 
168 out_free:
169 	kfree(static_data);
170 out:
171 	return ret;
172 }
173 
174 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
175 					     size_t fw_data_len, u32 dest)
176 {
177 	struct wlcore_partition_set partition;
178 	int addr, chunk_num, partition_limit;
179 	u8 *p, *chunk;
180 	int ret;
181 
182 	/* whal_FwCtrl_LoadFwImageSm() */
183 
184 	wl1271_debug(DEBUG_BOOT, "starting firmware upload");
185 
186 	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
187 		     fw_data_len, CHUNK_SIZE);
188 
189 	if ((fw_data_len % 4) != 0) {
190 		wl1271_error("firmware length not multiple of four");
191 		return -EIO;
192 	}
193 
194 	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
195 	if (!chunk) {
196 		wl1271_error("allocation for firmware upload chunk failed");
197 		return -ENOMEM;
198 	}
199 
200 	memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
201 	partition.mem.start = dest;
202 	ret = wlcore_set_partition(wl, &partition);
203 	if (ret < 0)
204 		goto out;
205 
206 	/* 10.1 set partition limit and chunk num */
207 	chunk_num = 0;
208 	partition_limit = wl->ptable[PART_DOWN].mem.size;
209 
210 	while (chunk_num < fw_data_len / CHUNK_SIZE) {
211 		/* 10.2 update partition, if needed */
212 		addr = dest + (chunk_num + 2) * CHUNK_SIZE;
213 		if (addr > partition_limit) {
214 			addr = dest + chunk_num * CHUNK_SIZE;
215 			partition_limit = chunk_num * CHUNK_SIZE +
216 				wl->ptable[PART_DOWN].mem.size;
217 			partition.mem.start = addr;
218 			ret = wlcore_set_partition(wl, &partition);
219 			if (ret < 0)
220 				goto out;
221 		}
222 
223 		/* 10.3 upload the chunk */
224 		addr = dest + chunk_num * CHUNK_SIZE;
225 		p = buf + chunk_num * CHUNK_SIZE;
226 		memcpy(chunk, p, CHUNK_SIZE);
227 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
228 			     p, addr);
229 		ret = wlcore_write(wl, addr, chunk, CHUNK_SIZE, false);
230 		if (ret < 0)
231 			goto out;
232 
233 		chunk_num++;
234 	}
235 
236 	/* 10.4 upload the last chunk */
237 	addr = dest + chunk_num * CHUNK_SIZE;
238 	p = buf + chunk_num * CHUNK_SIZE;
239 	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
240 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
241 		     fw_data_len % CHUNK_SIZE, p, addr);
242 	ret = wlcore_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
243 
244 out:
245 	kfree(chunk);
246 	return ret;
247 }
248 
249 int wlcore_boot_upload_firmware(struct wl1271 *wl)
250 {
251 	u32 chunks, addr, len;
252 	int ret = 0;
253 	u8 *fw;
254 
255 	fw = wl->fw;
256 	chunks = be32_to_cpup((__be32 *) fw);
257 	fw += sizeof(u32);
258 
259 	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
260 
261 	while (chunks--) {
262 		addr = be32_to_cpup((__be32 *) fw);
263 		fw += sizeof(u32);
264 		len = be32_to_cpup((__be32 *) fw);
265 		fw += sizeof(u32);
266 
267 		if (len > 300000) {
268 			wl1271_info("firmware chunk too long: %u", len);
269 			return -EINVAL;
270 		}
271 		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
272 			     chunks, addr, len);
273 		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
274 		if (ret != 0)
275 			break;
276 		fw += len;
277 	}
278 
279 	return ret;
280 }
281 EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);
282 
283 int wlcore_boot_upload_nvs(struct wl1271 *wl)
284 {
285 	size_t nvs_len, burst_len;
286 	int i;
287 	u32 dest_addr, val;
288 	u8 *nvs_ptr, *nvs_aligned;
289 	int ret;
290 
291 	if (wl->nvs == NULL) {
292 		wl1271_error("NVS file is needed during boot");
293 		return -ENODEV;
294 	}
295 
296 	if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
297 		struct wl1271_nvs_file *nvs =
298 			(struct wl1271_nvs_file *)wl->nvs;
299 		/*
300 		 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
301 		 * band configurations) can be removed when those NVS files stop
302 		 * floating around.
303 		 */
304 		if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
305 		    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
306 			if (nvs->general_params.dual_mode_select)
307 				wl->enable_11a = true;
308 		}
309 
310 		if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
311 		    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
312 		     wl->enable_11a)) {
313 			wl1271_error("nvs size is not as expected: %zu != %zu",
314 				wl->nvs_len, sizeof(struct wl1271_nvs_file));
315 			kfree(wl->nvs);
316 			wl->nvs = NULL;
317 			wl->nvs_len = 0;
318 			return -EILSEQ;
319 		}
320 
321 		/* only the first part of the NVS needs to be uploaded */
322 		nvs_len = sizeof(nvs->nvs);
323 		nvs_ptr = (u8 *) nvs->nvs;
324 	} else {
325 		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
326 
327 		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
328 			if (nvs->general_params.dual_mode_select)
329 				wl->enable_11a = true;
330 		} else {
331 			wl1271_error("nvs size is not as expected: %zu != %zu",
332 				     wl->nvs_len,
333 				     sizeof(struct wl128x_nvs_file));
334 			kfree(wl->nvs);
335 			wl->nvs = NULL;
336 			wl->nvs_len = 0;
337 			return -EILSEQ;
338 		}
339 
340 		/* only the first part of the NVS needs to be uploaded */
341 		nvs_len = sizeof(nvs->nvs);
342 		nvs_ptr = (u8 *)nvs->nvs;
343 	}
344 
345 	/* update current MAC address to NVS */
346 	nvs_ptr[11] = wl->addresses[0].addr[0];
347 	nvs_ptr[10] = wl->addresses[0].addr[1];
348 	nvs_ptr[6] = wl->addresses[0].addr[2];
349 	nvs_ptr[5] = wl->addresses[0].addr[3];
350 	nvs_ptr[4] = wl->addresses[0].addr[4];
351 	nvs_ptr[3] = wl->addresses[0].addr[5];
352 
353 	/*
354 	 * Layout before the actual NVS tables:
355 	 * 1 byte : burst length.
356 	 * 2 bytes: destination address.
357 	 * n bytes: data to burst copy.
358 	 *
359 	 * This is ended by a 0 length, then the NVS tables.
360 	 */
361 
362 	/* FIXME: Do we need to check here whether the LSB is 1? */
363 	while (nvs_ptr[0]) {
364 		burst_len = nvs_ptr[0];
365 		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
366 
367 		/*
368 		 * Due to our new wl1271_translate_reg_addr function,
369 		 * we need to add the register partition start address
370 		 * to the destination
371 		 */
372 		dest_addr += wl->curr_part.reg.start;
373 
374 		/* We move our pointer to the data */
375 		nvs_ptr += 3;
376 
377 		for (i = 0; i < burst_len; i++) {
378 			if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
379 				goto out_badnvs;
380 
381 			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
382 			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
383 
384 			wl1271_debug(DEBUG_BOOT,
385 				     "nvs burst write 0x%x: 0x%x",
386 				     dest_addr, val);
387 			ret = wlcore_write32(wl, dest_addr, val);
388 			if (ret < 0)
389 				return ret;
390 
391 			nvs_ptr += 4;
392 			dest_addr += 4;
393 		}
394 
395 		if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
396 			goto out_badnvs;
397 	}
398 
399 	/*
400 	 * We've reached the first zero length, the first NVS table
401 	 * is located at an aligned offset which is at least 7 bytes further.
402 	 * NOTE: The wl->nvs->nvs element must be first, in order to
403 	 * simplify the casting, we assume it is at the beginning of
404 	 * the wl->nvs structure.
405 	 */
406 	nvs_ptr = (u8 *)wl->nvs +
407 			ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
408 
409 	if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
410 		goto out_badnvs;
411 
412 	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
413 
414 	/* Now we must set the partition correctly */
415 	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
416 	if (ret < 0)
417 		return ret;
418 
419 	/* Copy the NVS tables to a new block to ensure alignment */
420 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
421 	if (!nvs_aligned)
422 		return -ENOMEM;
423 
424 	/* And finally we upload the NVS tables */
425 	ret = wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS, nvs_aligned, nvs_len,
426 				false);
427 
428 	kfree(nvs_aligned);
429 	return ret;
430 
431 out_badnvs:
432 	wl1271_error("nvs data is malformed");
433 	return -EILSEQ;
434 }
435 EXPORT_SYMBOL_GPL(wlcore_boot_upload_nvs);
436 
437 int wlcore_boot_run_firmware(struct wl1271 *wl)
438 {
439 	int loop, ret;
440 	u32 chip_id, intr;
441 
442 	/* Make sure we have the boot partition */
443 	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
444 	if (ret < 0)
445 		return ret;
446 
447 	ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
448 	if (ret < 0)
449 		return ret;
450 
451 	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &chip_id);
452 	if (ret < 0)
453 		return ret;
454 
455 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
456 
457 	if (chip_id != wl->chip.id) {
458 		wl1271_error("chip id doesn't match after firmware boot");
459 		return -EIO;
460 	}
461 
462 	/* wait for init to complete */
463 	loop = 0;
464 	while (loop++ < INIT_LOOP) {
465 		udelay(INIT_LOOP_DELAY);
466 		ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
467 		if (ret < 0)
468 			return ret;
469 
470 		if (intr == 0xffffffff) {
471 			wl1271_error("error reading hardware complete "
472 				     "init indication");
473 			return -EIO;
474 		}
475 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
476 		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
477 			ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
478 					       WL1271_ACX_INTR_INIT_COMPLETE);
479 			if (ret < 0)
480 				return ret;
481 			break;
482 		}
483 	}
484 
485 	if (loop > INIT_LOOP) {
486 		wl1271_error("timeout waiting for the hardware to "
487 			     "complete initialization");
488 		return -EIO;
489 	}
490 
491 	/* get hardware config command mail box */
492 	ret = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR, &wl->cmd_box_addr);
493 	if (ret < 0)
494 		return ret;
495 
496 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
497 
498 	/* get hardware config event mail box */
499 	ret = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR, &wl->mbox_ptr[0]);
500 	if (ret < 0)
501 		return ret;
502 
503 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + wl->mbox_size;
504 
505 	wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
506 		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
507 
508 	ret = wlcore_boot_static_data(wl);
509 	if (ret < 0) {
510 		wl1271_error("error getting static data");
511 		return ret;
512 	}
513 
514 	/*
515 	 * in case of full asynchronous mode the firmware event must be
516 	 * ready to receive event from the command mailbox
517 	 */
518 
519 	/* unmask required mbox events  */
520 	ret = wl1271_event_unmask(wl);
521 	if (ret < 0) {
522 		wl1271_error("EVENT mask setting failed");
523 		return ret;
524 	}
525 
526 	/* set the working partition to its "running" mode offset */
527 	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
528 
529 	/* firmware startup completed */
530 	return ret;
531 }
532 EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);
533