xref: /openbmc/linux/drivers/net/wireless/ti/wlcore/boot.c (revision 6d8e62c3)
1 /*
2  * This file is part of wl1271
3  *
4  * Copyright (C) 2008-2010 Nokia Corporation
5  *
6  * Contact: Luciano Coelho <luciano.coelho@nokia.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License
10  * version 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful, but
13  * WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
15  * General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
20  * 02110-1301 USA
21  *
22  */
23 
24 #include <linux/slab.h>
25 #include <linux/wl12xx.h>
26 #include <linux/export.h>
27 
28 #include "debug.h"
29 #include "acx.h"
30 #include "boot.h"
31 #include "io.h"
32 #include "event.h"
33 #include "rx.h"
34 #include "hw_ops.h"
35 
36 static int wl1271_boot_set_ecpu_ctrl(struct wl1271 *wl, u32 flag)
37 {
38 	u32 cpu_ctrl;
39 	int ret;
40 
41 	/* 10.5.0 run the firmware (I) */
42 	ret = wlcore_read_reg(wl, REG_ECPU_CONTROL, &cpu_ctrl);
43 	if (ret < 0)
44 		goto out;
45 
46 	/* 10.5.1 run the firmware (II) */
47 	cpu_ctrl |= flag;
48 	ret = wlcore_write_reg(wl, REG_ECPU_CONTROL, cpu_ctrl);
49 
50 out:
51 	return ret;
52 }
53 
54 static int wlcore_boot_parse_fw_ver(struct wl1271 *wl,
55 				    struct wl1271_static_data *static_data)
56 {
57 	int ret;
58 
59 	strncpy(wl->chip.fw_ver_str, static_data->fw_version,
60 		sizeof(wl->chip.fw_ver_str));
61 
62 	/* make sure the string is NULL-terminated */
63 	wl->chip.fw_ver_str[sizeof(wl->chip.fw_ver_str) - 1] = '\0';
64 
65 	ret = sscanf(wl->chip.fw_ver_str + 4, "%u.%u.%u.%u.%u",
66 		     &wl->chip.fw_ver[0], &wl->chip.fw_ver[1],
67 		     &wl->chip.fw_ver[2], &wl->chip.fw_ver[3],
68 		     &wl->chip.fw_ver[4]);
69 
70 	if (ret != 5) {
71 		wl1271_warning("fw version incorrect value");
72 		memset(wl->chip.fw_ver, 0, sizeof(wl->chip.fw_ver));
73 		ret = -EINVAL;
74 		goto out;
75 	}
76 
77 	ret = wlcore_identify_fw(wl);
78 	if (ret < 0)
79 		goto out;
80 out:
81 	return ret;
82 }
83 
84 static int wlcore_validate_fw_ver(struct wl1271 *wl)
85 {
86 	unsigned int *fw_ver = wl->chip.fw_ver;
87 	unsigned int *min_ver = (wl->fw_type == WL12XX_FW_TYPE_MULTI) ?
88 		wl->min_mr_fw_ver : wl->min_sr_fw_ver;
89 	char min_fw_str[32] = "";
90 	int i;
91 
92 	/* the chip must be exactly equal */
93 	if ((min_ver[FW_VER_CHIP] != WLCORE_FW_VER_IGNORE) &&
94 	    (min_ver[FW_VER_CHIP] != fw_ver[FW_VER_CHIP]))
95 		goto fail;
96 
97 	/* the firmware type must be equal */
98 	if ((min_ver[FW_VER_IF_TYPE] != WLCORE_FW_VER_IGNORE) &&
99 	    (min_ver[FW_VER_IF_TYPE] != fw_ver[FW_VER_IF_TYPE]))
100 		goto fail;
101 
102 	/* the project number must be equal */
103 	if ((min_ver[FW_VER_SUBTYPE] != WLCORE_FW_VER_IGNORE) &&
104 	    (min_ver[FW_VER_SUBTYPE] != fw_ver[FW_VER_SUBTYPE]))
105 		goto fail;
106 
107 	/* the API version must be greater or equal */
108 	if ((min_ver[FW_VER_MAJOR] != WLCORE_FW_VER_IGNORE) &&
109 		 (min_ver[FW_VER_MAJOR] > fw_ver[FW_VER_MAJOR]))
110 		goto fail;
111 
112 	/* if the API version is equal... */
113 	if (((min_ver[FW_VER_MAJOR] == WLCORE_FW_VER_IGNORE) ||
114 	     (min_ver[FW_VER_MAJOR] == fw_ver[FW_VER_MAJOR])) &&
115 	    /* ...the minor must be greater or equal */
116 	    ((min_ver[FW_VER_MINOR] != WLCORE_FW_VER_IGNORE) &&
117 	     (min_ver[FW_VER_MINOR] > fw_ver[FW_VER_MINOR])))
118 		goto fail;
119 
120 	return 0;
121 
122 fail:
123 	for (i = 0; i < NUM_FW_VER; i++)
124 		if (min_ver[i] == WLCORE_FW_VER_IGNORE)
125 			snprintf(min_fw_str, sizeof(min_fw_str),
126 				  "%s*.", min_fw_str);
127 		else
128 			snprintf(min_fw_str, sizeof(min_fw_str),
129 				  "%s%u.", min_fw_str, min_ver[i]);
130 
131 	wl1271_error("Your WiFi FW version (%u.%u.%u.%u.%u) is invalid.\n"
132 		     "Please use at least FW %s\n"
133 		     "You can get the latest firmwares at:\n"
134 		     "git://github.com/TI-OpenLink/firmwares.git",
135 		     fw_ver[FW_VER_CHIP], fw_ver[FW_VER_IF_TYPE],
136 		     fw_ver[FW_VER_MAJOR], fw_ver[FW_VER_SUBTYPE],
137 		     fw_ver[FW_VER_MINOR], min_fw_str);
138 	return -EINVAL;
139 }
140 
141 static int wlcore_boot_static_data(struct wl1271 *wl)
142 {
143 	struct wl1271_static_data *static_data;
144 	size_t len = sizeof(*static_data) + wl->static_data_priv_len;
145 	int ret;
146 
147 	static_data = kmalloc(len, GFP_KERNEL);
148 	if (!static_data) {
149 		ret = -ENOMEM;
150 		goto out;
151 	}
152 
153 	ret = wlcore_read(wl, wl->cmd_box_addr, static_data, len, false);
154 	if (ret < 0)
155 		goto out_free;
156 
157 	ret = wlcore_boot_parse_fw_ver(wl, static_data);
158 	if (ret < 0)
159 		goto out_free;
160 
161 	ret = wlcore_validate_fw_ver(wl);
162 	if (ret < 0)
163 		goto out_free;
164 
165 	ret = wlcore_handle_static_data(wl, static_data);
166 	if (ret < 0)
167 		goto out_free;
168 
169 out_free:
170 	kfree(static_data);
171 out:
172 	return ret;
173 }
174 
175 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
176 					     size_t fw_data_len, u32 dest)
177 {
178 	struct wlcore_partition_set partition;
179 	int addr, chunk_num, partition_limit;
180 	u8 *p, *chunk;
181 	int ret;
182 
183 	/* whal_FwCtrl_LoadFwImageSm() */
184 
185 	wl1271_debug(DEBUG_BOOT, "starting firmware upload");
186 
187 	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
188 		     fw_data_len, CHUNK_SIZE);
189 
190 	if ((fw_data_len % 4) != 0) {
191 		wl1271_error("firmware length not multiple of four");
192 		return -EIO;
193 	}
194 
195 	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
196 	if (!chunk) {
197 		wl1271_error("allocation for firmware upload chunk failed");
198 		return -ENOMEM;
199 	}
200 
201 	memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
202 	partition.mem.start = dest;
203 	ret = wlcore_set_partition(wl, &partition);
204 	if (ret < 0)
205 		goto out;
206 
207 	/* 10.1 set partition limit and chunk num */
208 	chunk_num = 0;
209 	partition_limit = wl->ptable[PART_DOWN].mem.size;
210 
211 	while (chunk_num < fw_data_len / CHUNK_SIZE) {
212 		/* 10.2 update partition, if needed */
213 		addr = dest + (chunk_num + 2) * CHUNK_SIZE;
214 		if (addr > partition_limit) {
215 			addr = dest + chunk_num * CHUNK_SIZE;
216 			partition_limit = chunk_num * CHUNK_SIZE +
217 				wl->ptable[PART_DOWN].mem.size;
218 			partition.mem.start = addr;
219 			ret = wlcore_set_partition(wl, &partition);
220 			if (ret < 0)
221 				goto out;
222 		}
223 
224 		/* 10.3 upload the chunk */
225 		addr = dest + chunk_num * CHUNK_SIZE;
226 		p = buf + chunk_num * CHUNK_SIZE;
227 		memcpy(chunk, p, CHUNK_SIZE);
228 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
229 			     p, addr);
230 		ret = wlcore_write(wl, addr, chunk, CHUNK_SIZE, false);
231 		if (ret < 0)
232 			goto out;
233 
234 		chunk_num++;
235 	}
236 
237 	/* 10.4 upload the last chunk */
238 	addr = dest + chunk_num * CHUNK_SIZE;
239 	p = buf + chunk_num * CHUNK_SIZE;
240 	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
241 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
242 		     fw_data_len % CHUNK_SIZE, p, addr);
243 	ret = wlcore_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
244 
245 out:
246 	kfree(chunk);
247 	return ret;
248 }
249 
250 int wlcore_boot_upload_firmware(struct wl1271 *wl)
251 {
252 	u32 chunks, addr, len;
253 	int ret = 0;
254 	u8 *fw;
255 
256 	fw = wl->fw;
257 	chunks = be32_to_cpup((__be32 *) fw);
258 	fw += sizeof(u32);
259 
260 	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
261 
262 	while (chunks--) {
263 		addr = be32_to_cpup((__be32 *) fw);
264 		fw += sizeof(u32);
265 		len = be32_to_cpup((__be32 *) fw);
266 		fw += sizeof(u32);
267 
268 		if (len > 300000) {
269 			wl1271_info("firmware chunk too long: %u", len);
270 			return -EINVAL;
271 		}
272 		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
273 			     chunks, addr, len);
274 		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
275 		if (ret != 0)
276 			break;
277 		fw += len;
278 	}
279 
280 	return ret;
281 }
282 EXPORT_SYMBOL_GPL(wlcore_boot_upload_firmware);
283 
284 int wlcore_boot_upload_nvs(struct wl1271 *wl)
285 {
286 	size_t nvs_len, burst_len;
287 	int i;
288 	u32 dest_addr, val;
289 	u8 *nvs_ptr, *nvs_aligned;
290 	int ret;
291 
292 	if (wl->nvs == NULL) {
293 		wl1271_error("NVS file is needed during boot");
294 		return -ENODEV;
295 	}
296 
297 	if (wl->quirks & WLCORE_QUIRK_LEGACY_NVS) {
298 		struct wl1271_nvs_file *nvs =
299 			(struct wl1271_nvs_file *)wl->nvs;
300 		/*
301 		 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
302 		 * band configurations) can be removed when those NVS files stop
303 		 * floating around.
304 		 */
305 		if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
306 		    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
307 			if (nvs->general_params.dual_mode_select)
308 				wl->enable_11a = true;
309 		}
310 
311 		if (wl->nvs_len != sizeof(struct wl1271_nvs_file) &&
312 		    (wl->nvs_len != WL1271_INI_LEGACY_NVS_FILE_SIZE ||
313 		     wl->enable_11a)) {
314 			wl1271_error("nvs size is not as expected: %zu != %zu",
315 				wl->nvs_len, sizeof(struct wl1271_nvs_file));
316 			kfree(wl->nvs);
317 			wl->nvs = NULL;
318 			wl->nvs_len = 0;
319 			return -EILSEQ;
320 		}
321 
322 		/* only the first part of the NVS needs to be uploaded */
323 		nvs_len = sizeof(nvs->nvs);
324 		nvs_ptr = (u8 *) nvs->nvs;
325 	} else {
326 		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
327 
328 		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
329 			if (nvs->general_params.dual_mode_select)
330 				wl->enable_11a = true;
331 		} else {
332 			wl1271_error("nvs size is not as expected: %zu != %zu",
333 				     wl->nvs_len,
334 				     sizeof(struct wl128x_nvs_file));
335 			kfree(wl->nvs);
336 			wl->nvs = NULL;
337 			wl->nvs_len = 0;
338 			return -EILSEQ;
339 		}
340 
341 		/* only the first part of the NVS needs to be uploaded */
342 		nvs_len = sizeof(nvs->nvs);
343 		nvs_ptr = (u8 *)nvs->nvs;
344 	}
345 
346 	/* update current MAC address to NVS */
347 	nvs_ptr[11] = wl->addresses[0].addr[0];
348 	nvs_ptr[10] = wl->addresses[0].addr[1];
349 	nvs_ptr[6] = wl->addresses[0].addr[2];
350 	nvs_ptr[5] = wl->addresses[0].addr[3];
351 	nvs_ptr[4] = wl->addresses[0].addr[4];
352 	nvs_ptr[3] = wl->addresses[0].addr[5];
353 
354 	/*
355 	 * Layout before the actual NVS tables:
356 	 * 1 byte : burst length.
357 	 * 2 bytes: destination address.
358 	 * n bytes: data to burst copy.
359 	 *
360 	 * This is ended by a 0 length, then the NVS tables.
361 	 */
362 
363 	/* FIXME: Do we need to check here whether the LSB is 1? */
364 	while (nvs_ptr[0]) {
365 		burst_len = nvs_ptr[0];
366 		dest_addr = (nvs_ptr[1] & 0xfe) | ((u32)(nvs_ptr[2] << 8));
367 
368 		/*
369 		 * Due to our new wl1271_translate_reg_addr function,
370 		 * we need to add the register partition start address
371 		 * to the destination
372 		 */
373 		dest_addr += wl->curr_part.reg.start;
374 
375 		/* We move our pointer to the data */
376 		nvs_ptr += 3;
377 
378 		for (i = 0; i < burst_len; i++) {
379 			if (nvs_ptr + 3 >= (u8 *) wl->nvs + nvs_len)
380 				goto out_badnvs;
381 
382 			val = (nvs_ptr[0] | (nvs_ptr[1] << 8)
383 			       | (nvs_ptr[2] << 16) | (nvs_ptr[3] << 24));
384 
385 			wl1271_debug(DEBUG_BOOT,
386 				     "nvs burst write 0x%x: 0x%x",
387 				     dest_addr, val);
388 			ret = wlcore_write32(wl, dest_addr, val);
389 			if (ret < 0)
390 				return ret;
391 
392 			nvs_ptr += 4;
393 			dest_addr += 4;
394 		}
395 
396 		if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
397 			goto out_badnvs;
398 	}
399 
400 	/*
401 	 * We've reached the first zero length, the first NVS table
402 	 * is located at an aligned offset which is at least 7 bytes further.
403 	 * NOTE: The wl->nvs->nvs element must be first, in order to
404 	 * simplify the casting, we assume it is at the beginning of
405 	 * the wl->nvs structure.
406 	 */
407 	nvs_ptr = (u8 *)wl->nvs +
408 			ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
409 
410 	if (nvs_ptr >= (u8 *) wl->nvs + nvs_len)
411 		goto out_badnvs;
412 
413 	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
414 
415 	/* Now we must set the partition correctly */
416 	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
417 	if (ret < 0)
418 		return ret;
419 
420 	/* Copy the NVS tables to a new block to ensure alignment */
421 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
422 	if (!nvs_aligned)
423 		return -ENOMEM;
424 
425 	/* And finally we upload the NVS tables */
426 	ret = wlcore_write_data(wl, REG_CMD_MBOX_ADDRESS, nvs_aligned, nvs_len,
427 				false);
428 
429 	kfree(nvs_aligned);
430 	return ret;
431 
432 out_badnvs:
433 	wl1271_error("nvs data is malformed");
434 	return -EILSEQ;
435 }
436 EXPORT_SYMBOL_GPL(wlcore_boot_upload_nvs);
437 
438 int wlcore_boot_run_firmware(struct wl1271 *wl)
439 {
440 	int loop, ret;
441 	u32 chip_id, intr;
442 
443 	/* Make sure we have the boot partition */
444 	ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]);
445 	if (ret < 0)
446 		return ret;
447 
448 	ret = wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
449 	if (ret < 0)
450 		return ret;
451 
452 	ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &chip_id);
453 	if (ret < 0)
454 		return ret;
455 
456 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
457 
458 	if (chip_id != wl->chip.id) {
459 		wl1271_error("chip id doesn't match after firmware boot");
460 		return -EIO;
461 	}
462 
463 	/* wait for init to complete */
464 	loop = 0;
465 	while (loop++ < INIT_LOOP) {
466 		udelay(INIT_LOOP_DELAY);
467 		ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
468 		if (ret < 0)
469 			return ret;
470 
471 		if (intr == 0xffffffff) {
472 			wl1271_error("error reading hardware complete "
473 				     "init indication");
474 			return -EIO;
475 		}
476 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
477 		else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) {
478 			ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
479 					       WL1271_ACX_INTR_INIT_COMPLETE);
480 			if (ret < 0)
481 				return ret;
482 			break;
483 		}
484 	}
485 
486 	if (loop > INIT_LOOP) {
487 		wl1271_error("timeout waiting for the hardware to "
488 			     "complete initialization");
489 		return -EIO;
490 	}
491 
492 	/* get hardware config command mail box */
493 	ret = wlcore_read_reg(wl, REG_COMMAND_MAILBOX_PTR, &wl->cmd_box_addr);
494 	if (ret < 0)
495 		return ret;
496 
497 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x", wl->cmd_box_addr);
498 
499 	/* get hardware config event mail box */
500 	ret = wlcore_read_reg(wl, REG_EVENT_MAILBOX_PTR, &wl->mbox_ptr[0]);
501 	if (ret < 0)
502 		return ret;
503 
504 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + wl->mbox_size;
505 
506 	wl1271_debug(DEBUG_MAILBOX, "MBOX ptrs: 0x%x 0x%x",
507 		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
508 
509 	ret = wlcore_boot_static_data(wl);
510 	if (ret < 0) {
511 		wl1271_error("error getting static data");
512 		return ret;
513 	}
514 
515 	/*
516 	 * in case of full asynchronous mode the firmware event must be
517 	 * ready to receive event from the command mailbox
518 	 */
519 
520 	/* unmask required mbox events  */
521 	ret = wl1271_event_unmask(wl);
522 	if (ret < 0) {
523 		wl1271_error("EVENT mask setting failed");
524 		return ret;
525 	}
526 
527 	/* set the working partition to its "running" mode offset */
528 	ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]);
529 
530 	/* firmware startup completed */
531 	return ret;
532 }
533 EXPORT_SYMBOL_GPL(wlcore_boot_run_firmware);
534