1 /* 2 * This file is part of wlcore 3 * 4 * Copyright (C) 2011 Texas Instruments Inc. 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * version 2 as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 18 * 02110-1301 USA 19 * 20 */ 21 22 #ifndef __REG_H__ 23 #define __REG_H__ 24 25 #define WL18XX_REGISTERS_BASE 0x00800000 26 #define WL18XX_CODE_BASE 0x00000000 27 #define WL18XX_DATA_BASE 0x00400000 28 #define WL18XX_DOUBLE_BUFFER_BASE 0x00600000 29 #define WL18XX_MCU_KEY_SEARCH_BASE 0x00700000 30 #define WL18XX_PHY_BASE 0x00900000 31 #define WL18XX_TOP_OCP_BASE 0x00A00000 32 #define WL18XX_PACKET_RAM_BASE 0x00B00000 33 #define WL18XX_HOST_BASE 0x00C00000 34 35 #define WL18XX_REGISTERS_DOWN_SIZE 0x0000B000 36 37 #define WL18XX_REG_BOOT_PART_START 0x00802000 38 #define WL18XX_REG_BOOT_PART_SIZE 0x00014578 39 40 #define WL18XX_PHY_INIT_MEM_ADDR 0x80926000 41 42 #define WL18XX_SDIO_WSPI_BASE (WL18XX_REGISTERS_BASE) 43 #define WL18XX_REG_CONFIG_BASE (WL18XX_REGISTERS_BASE + 0x02000) 44 #define WL18XX_WGCM_REGS_BASE (WL18XX_REGISTERS_BASE + 0x03000) 45 #define WL18XX_ENC_BASE (WL18XX_REGISTERS_BASE + 0x04000) 46 #define WL18XX_INTERRUPT_BASE (WL18XX_REGISTERS_BASE + 0x05000) 47 #define WL18XX_UART_BASE (WL18XX_REGISTERS_BASE + 0x06000) 48 #define WL18XX_WELP_BASE (WL18XX_REGISTERS_BASE + 0x07000) 49 #define WL18XX_TCP_CKSM_BASE (WL18XX_REGISTERS_BASE + 0x08000) 50 #define WL18XX_FIFO_BASE (WL18XX_REGISTERS_BASE + 0x09000) 51 #define WL18XX_OCP_BRIDGE_BASE (WL18XX_REGISTERS_BASE + 0x0A000) 52 #define WL18XX_PMAC_RX_BASE (WL18XX_REGISTERS_BASE + 0x14800) 53 #define WL18XX_PMAC_ACM_BASE (WL18XX_REGISTERS_BASE + 0x14C00) 54 #define WL18XX_PMAC_TX_BASE (WL18XX_REGISTERS_BASE + 0x15000) 55 #define WL18XX_PMAC_CSR_BASE (WL18XX_REGISTERS_BASE + 0x15400) 56 57 #define WL18XX_REG_ECPU_CONTROL (WL18XX_REGISTERS_BASE + 0x02004) 58 #define WL18XX_REG_INTERRUPT_NO_CLEAR (WL18XX_REGISTERS_BASE + 0x050E8) 59 #define WL18XX_REG_INTERRUPT_ACK (WL18XX_REGISTERS_BASE + 0x050F0) 60 #define WL18XX_REG_INTERRUPT_TRIG (WL18XX_REGISTERS_BASE + 0x5074) 61 #define WL18XX_REG_INTERRUPT_TRIG_H (WL18XX_REGISTERS_BASE + 0x5078) 62 #define WL18XX_REG_INTERRUPT_MASK (WL18XX_REGISTERS_BASE + 0x0050DC) 63 64 #define WL18XX_REG_CHIP_ID_B (WL18XX_REGISTERS_BASE + 0x01542C) 65 66 #define WL18XX_SLV_MEM_DATA (WL18XX_HOST_BASE + 0x0018) 67 #define WL18XX_SLV_REG_DATA (WL18XX_HOST_BASE + 0x0008) 68 69 /* Scratch Pad registers*/ 70 #define WL18XX_SCR_PAD0 (WL18XX_REGISTERS_BASE + 0x0154EC) 71 #define WL18XX_SCR_PAD1 (WL18XX_REGISTERS_BASE + 0x0154F0) 72 #define WL18XX_SCR_PAD2 (WL18XX_REGISTERS_BASE + 0x0154F4) 73 #define WL18XX_SCR_PAD3 (WL18XX_REGISTERS_BASE + 0x0154F8) 74 #define WL18XX_SCR_PAD4 (WL18XX_REGISTERS_BASE + 0x0154FC) 75 #define WL18XX_SCR_PAD4_SET (WL18XX_REGISTERS_BASE + 0x015504) 76 #define WL18XX_SCR_PAD4_CLR (WL18XX_REGISTERS_BASE + 0x015500) 77 #define WL18XX_SCR_PAD5 (WL18XX_REGISTERS_BASE + 0x015508) 78 #define WL18XX_SCR_PAD5_SET (WL18XX_REGISTERS_BASE + 0x015510) 79 #define WL18XX_SCR_PAD5_CLR (WL18XX_REGISTERS_BASE + 0x01550C) 80 #define WL18XX_SCR_PAD6 (WL18XX_REGISTERS_BASE + 0x015514) 81 #define WL18XX_SCR_PAD7 (WL18XX_REGISTERS_BASE + 0x015518) 82 #define WL18XX_SCR_PAD8 (WL18XX_REGISTERS_BASE + 0x01551C) 83 #define WL18XX_SCR_PAD9 (WL18XX_REGISTERS_BASE + 0x015520) 84 85 /* Spare registers*/ 86 #define WL18XX_SPARE_A1 (WL18XX_REGISTERS_BASE + 0x002194) 87 #define WL18XX_SPARE_A2 (WL18XX_REGISTERS_BASE + 0x002198) 88 #define WL18XX_SPARE_A3 (WL18XX_REGISTERS_BASE + 0x00219C) 89 #define WL18XX_SPARE_A4 (WL18XX_REGISTERS_BASE + 0x0021A0) 90 #define WL18XX_SPARE_A5 (WL18XX_REGISTERS_BASE + 0x0021A4) 91 #define WL18XX_SPARE_A6 (WL18XX_REGISTERS_BASE + 0x0021A8) 92 #define WL18XX_SPARE_A7 (WL18XX_REGISTERS_BASE + 0x0021AC) 93 #define WL18XX_SPARE_A8 (WL18XX_REGISTERS_BASE + 0x0021B0) 94 #define WL18XX_SPARE_B1 (WL18XX_REGISTERS_BASE + 0x015524) 95 #define WL18XX_SPARE_B2 (WL18XX_REGISTERS_BASE + 0x015528) 96 #define WL18XX_SPARE_B3 (WL18XX_REGISTERS_BASE + 0x01552C) 97 #define WL18XX_SPARE_B4 (WL18XX_REGISTERS_BASE + 0x015530) 98 #define WL18XX_SPARE_B5 (WL18XX_REGISTERS_BASE + 0x015534) 99 #define WL18XX_SPARE_B6 (WL18XX_REGISTERS_BASE + 0x015538) 100 #define WL18XX_SPARE_B7 (WL18XX_REGISTERS_BASE + 0x01553C) 101 #define WL18XX_SPARE_B8 (WL18XX_REGISTERS_BASE + 0x015540) 102 103 #define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0) 104 #define WL18XX_REG_EVENT_MAILBOX_PTR (WL18XX_SCR_PAD1) 105 #define WL18XX_EEPROMLESS_IND (WL18XX_SCR_PAD4) 106 107 #define WL18XX_WELP_ARM_COMMAND (WL18XX_REGISTERS_BASE + 0x7100) 108 #define WL18XX_ENABLE (WL18XX_REGISTERS_BASE + 0x01543C) 109 110 /* PRCM registers */ 111 #define PLATFORM_DETECTION 0xA0E3E0 112 #define OCS_EN 0xA02080 113 #define PRIMARY_CLK_DETECT 0xA020A6 114 #define PLLSH_WCS_PLL_N 0xA02362 115 #define PLLSH_WCS_PLL_M 0xA02360 116 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_1 0xA02364 117 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_2 0xA02366 118 #define PLLSH_WCS_PLL_P_FACTOR_CFG_1 0xA02368 119 #define PLLSH_WCS_PLL_P_FACTOR_CFG_2 0xA0236A 120 #define PLLSH_WCS_PLL_SWALLOW_EN 0xA0236C 121 #define PLLSH_WL_PLL_EN 0xA02392 122 123 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK 0xFFFF 124 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK 0x007F 125 #define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK 0xFFFF 126 #define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK 0x000F 127 128 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL1 0x1 129 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL2 0x12 130 131 #define WL18XX_REG_FUSE_DATA_1_3 0xA0260C 132 #define WL18XX_PG_VER_MASK 0x70 133 #define WL18XX_PG_VER_OFFSET 4 134 135 #define WL18XX_REG_FUSE_BD_ADDR_1 0xA02602 136 #define WL18XX_REG_FUSE_BD_ADDR_2 0xA02606 137 138 #define WL18XX_CMD_MBOX_ADDRESS 0xB007B4 139 140 #define WL18XX_FW_STATUS_ADDR 0x50F8 141 142 #define CHIP_ID_185x_PG10 (0x06030101) 143 #define CHIP_ID_185x_PG20 (0x06030111) 144 145 /* 146 * Host Command Interrupt. Setting this bit masks 147 * the interrupt that the host issues to inform 148 * the FW that it has sent a command 149 * to the Wlan hardware Command Mailbox. 150 */ 151 #define WL18XX_INTR_TRIG_CMD BIT(28) 152 153 /* 154 * Host Event Acknowlegde Interrupt. The host 155 * sets this bit to acknowledge that it received 156 * the unsolicited information from the event 157 * mailbox. 158 */ 159 #define WL18XX_INTR_TRIG_EVENT_ACK BIT(29) 160 161 /* 162 * To boot the firmware in PLT mode we need to write this value in 163 * SCR_PAD8 before starting. 164 */ 165 #define WL18XX_SCR_PAD8_PLT 0xBABABEBE 166 167 enum { 168 COMPONENT_NO_SWITCH = 0x0, 169 COMPONENT_2_WAY_SWITCH = 0x1, 170 COMPONENT_3_WAY_SWITCH = 0x2, 171 COMPONENT_MATCHING = 0x3, 172 }; 173 174 enum { 175 FEM_NONE = 0x0, 176 FEM_VENDOR_1 = 0x1, 177 FEM_VENDOR_2 = 0x2, 178 FEM_VENDOR_3 = 0x3, 179 }; 180 181 enum { 182 BOARD_TYPE_EVB_18XX = 0, 183 BOARD_TYPE_DVP_18XX = 1, 184 BOARD_TYPE_HDK_18XX = 2, 185 BOARD_TYPE_FPGA_18XX = 3, 186 BOARD_TYPE_COM8_18XX = 4, 187 188 NUM_BOARD_TYPES, 189 }; 190 191 #endif /* __REG_H__ */ 192