1 /* 2 * This file is part of wl18xx 3 * 4 * Copyright (C) 2011 Texas Instruments 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * version 2 as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 18 * 02110-1301 USA 19 * 20 */ 21 22 #include <linux/module.h> 23 #include <linux/platform_device.h> 24 #include <linux/ip.h> 25 #include <linux/firmware.h> 26 #include <linux/etherdevice.h> 27 #include <linux/irq.h> 28 29 #include "../wlcore/wlcore.h" 30 #include "../wlcore/debug.h" 31 #include "../wlcore/io.h" 32 #include "../wlcore/acx.h" 33 #include "../wlcore/tx.h" 34 #include "../wlcore/rx.h" 35 #include "../wlcore/boot.h" 36 37 #include "reg.h" 38 #include "conf.h" 39 #include "cmd.h" 40 #include "acx.h" 41 #include "tx.h" 42 #include "wl18xx.h" 43 #include "io.h" 44 #include "scan.h" 45 #include "event.h" 46 #include "debugfs.h" 47 48 #define WL18XX_RX_CHECKSUM_MASK 0x40 49 50 static char *ht_mode_param = NULL; 51 static char *board_type_param = NULL; 52 static bool checksum_param = false; 53 static int num_rx_desc_param = -1; 54 55 /* phy paramters */ 56 static int dc2dc_param = -1; 57 static int n_antennas_2_param = -1; 58 static int n_antennas_5_param = -1; 59 static int low_band_component_param = -1; 60 static int low_band_component_type_param = -1; 61 static int high_band_component_param = -1; 62 static int high_band_component_type_param = -1; 63 static int pwr_limit_reference_11_abg_param = -1; 64 65 static const u8 wl18xx_rate_to_idx_2ghz[] = { 66 /* MCS rates are used only with 11n */ 67 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ 68 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ 69 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ 70 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ 71 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ 72 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ 73 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ 74 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ 75 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ 76 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ 77 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ 78 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ 79 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ 80 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ 81 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ 82 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ 83 84 11, /* WL18XX_CONF_HW_RXTX_RATE_54 */ 85 10, /* WL18XX_CONF_HW_RXTX_RATE_48 */ 86 9, /* WL18XX_CONF_HW_RXTX_RATE_36 */ 87 8, /* WL18XX_CONF_HW_RXTX_RATE_24 */ 88 89 /* TI-specific rate */ 90 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ 91 92 7, /* WL18XX_CONF_HW_RXTX_RATE_18 */ 93 6, /* WL18XX_CONF_HW_RXTX_RATE_12 */ 94 3, /* WL18XX_CONF_HW_RXTX_RATE_11 */ 95 5, /* WL18XX_CONF_HW_RXTX_RATE_9 */ 96 4, /* WL18XX_CONF_HW_RXTX_RATE_6 */ 97 2, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ 98 1, /* WL18XX_CONF_HW_RXTX_RATE_2 */ 99 0 /* WL18XX_CONF_HW_RXTX_RATE_1 */ 100 }; 101 102 static const u8 wl18xx_rate_to_idx_5ghz[] = { 103 /* MCS rates are used only with 11n */ 104 15, /* WL18XX_CONF_HW_RXTX_RATE_MCS15 */ 105 14, /* WL18XX_CONF_HW_RXTX_RATE_MCS14 */ 106 13, /* WL18XX_CONF_HW_RXTX_RATE_MCS13 */ 107 12, /* WL18XX_CONF_HW_RXTX_RATE_MCS12 */ 108 11, /* WL18XX_CONF_HW_RXTX_RATE_MCS11 */ 109 10, /* WL18XX_CONF_HW_RXTX_RATE_MCS10 */ 110 9, /* WL18XX_CONF_HW_RXTX_RATE_MCS9 */ 111 8, /* WL18XX_CONF_HW_RXTX_RATE_MCS8 */ 112 7, /* WL18XX_CONF_HW_RXTX_RATE_MCS7 */ 113 6, /* WL18XX_CONF_HW_RXTX_RATE_MCS6 */ 114 5, /* WL18XX_CONF_HW_RXTX_RATE_MCS5 */ 115 4, /* WL18XX_CONF_HW_RXTX_RATE_MCS4 */ 116 3, /* WL18XX_CONF_HW_RXTX_RATE_MCS3 */ 117 2, /* WL18XX_CONF_HW_RXTX_RATE_MCS2 */ 118 1, /* WL18XX_CONF_HW_RXTX_RATE_MCS1 */ 119 0, /* WL18XX_CONF_HW_RXTX_RATE_MCS0 */ 120 121 7, /* WL18XX_CONF_HW_RXTX_RATE_54 */ 122 6, /* WL18XX_CONF_HW_RXTX_RATE_48 */ 123 5, /* WL18XX_CONF_HW_RXTX_RATE_36 */ 124 4, /* WL18XX_CONF_HW_RXTX_RATE_24 */ 125 126 /* TI-specific rate */ 127 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_22 */ 128 129 3, /* WL18XX_CONF_HW_RXTX_RATE_18 */ 130 2, /* WL18XX_CONF_HW_RXTX_RATE_12 */ 131 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_11 */ 132 1, /* WL18XX_CONF_HW_RXTX_RATE_9 */ 133 0, /* WL18XX_CONF_HW_RXTX_RATE_6 */ 134 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_5_5 */ 135 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_2 */ 136 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL18XX_CONF_HW_RXTX_RATE_1 */ 137 }; 138 139 static const u8 *wl18xx_band_rate_to_idx[] = { 140 [NL80211_BAND_2GHZ] = wl18xx_rate_to_idx_2ghz, 141 [NL80211_BAND_5GHZ] = wl18xx_rate_to_idx_5ghz 142 }; 143 144 enum wl18xx_hw_rates { 145 WL18XX_CONF_HW_RXTX_RATE_MCS15 = 0, 146 WL18XX_CONF_HW_RXTX_RATE_MCS14, 147 WL18XX_CONF_HW_RXTX_RATE_MCS13, 148 WL18XX_CONF_HW_RXTX_RATE_MCS12, 149 WL18XX_CONF_HW_RXTX_RATE_MCS11, 150 WL18XX_CONF_HW_RXTX_RATE_MCS10, 151 WL18XX_CONF_HW_RXTX_RATE_MCS9, 152 WL18XX_CONF_HW_RXTX_RATE_MCS8, 153 WL18XX_CONF_HW_RXTX_RATE_MCS7, 154 WL18XX_CONF_HW_RXTX_RATE_MCS6, 155 WL18XX_CONF_HW_RXTX_RATE_MCS5, 156 WL18XX_CONF_HW_RXTX_RATE_MCS4, 157 WL18XX_CONF_HW_RXTX_RATE_MCS3, 158 WL18XX_CONF_HW_RXTX_RATE_MCS2, 159 WL18XX_CONF_HW_RXTX_RATE_MCS1, 160 WL18XX_CONF_HW_RXTX_RATE_MCS0, 161 WL18XX_CONF_HW_RXTX_RATE_54, 162 WL18XX_CONF_HW_RXTX_RATE_48, 163 WL18XX_CONF_HW_RXTX_RATE_36, 164 WL18XX_CONF_HW_RXTX_RATE_24, 165 WL18XX_CONF_HW_RXTX_RATE_22, 166 WL18XX_CONF_HW_RXTX_RATE_18, 167 WL18XX_CONF_HW_RXTX_RATE_12, 168 WL18XX_CONF_HW_RXTX_RATE_11, 169 WL18XX_CONF_HW_RXTX_RATE_9, 170 WL18XX_CONF_HW_RXTX_RATE_6, 171 WL18XX_CONF_HW_RXTX_RATE_5_5, 172 WL18XX_CONF_HW_RXTX_RATE_2, 173 WL18XX_CONF_HW_RXTX_RATE_1, 174 WL18XX_CONF_HW_RXTX_RATE_MAX, 175 }; 176 177 static struct wlcore_conf wl18xx_conf = { 178 .sg = { 179 .params = { 180 [WL18XX_CONF_SG_PARAM_0] = 0, 181 /* Configuartion Parameters */ 182 [WL18XX_CONF_SG_ANTENNA_CONFIGURATION] = 0, 183 [WL18XX_CONF_SG_ZIGBEE_COEX] = 0, 184 [WL18XX_CONF_SG_TIME_SYNC] = 0, 185 [WL18XX_CONF_SG_PARAM_4] = 0, 186 [WL18XX_CONF_SG_PARAM_5] = 0, 187 [WL18XX_CONF_SG_PARAM_6] = 0, 188 [WL18XX_CONF_SG_PARAM_7] = 0, 189 [WL18XX_CONF_SG_PARAM_8] = 0, 190 [WL18XX_CONF_SG_PARAM_9] = 0, 191 [WL18XX_CONF_SG_PARAM_10] = 0, 192 [WL18XX_CONF_SG_PARAM_11] = 0, 193 [WL18XX_CONF_SG_PARAM_12] = 0, 194 [WL18XX_CONF_SG_PARAM_13] = 0, 195 [WL18XX_CONF_SG_PARAM_14] = 0, 196 [WL18XX_CONF_SG_PARAM_15] = 0, 197 [WL18XX_CONF_SG_PARAM_16] = 0, 198 [WL18XX_CONF_SG_PARAM_17] = 0, 199 [WL18XX_CONF_SG_PARAM_18] = 0, 200 [WL18XX_CONF_SG_PARAM_19] = 0, 201 [WL18XX_CONF_SG_PARAM_20] = 0, 202 [WL18XX_CONF_SG_PARAM_21] = 0, 203 [WL18XX_CONF_SG_PARAM_22] = 0, 204 [WL18XX_CONF_SG_PARAM_23] = 0, 205 [WL18XX_CONF_SG_PARAM_24] = 0, 206 [WL18XX_CONF_SG_PARAM_25] = 0, 207 /* Active Scan Parameters */ 208 [WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, 209 [WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, 210 [WL18XX_CONF_SG_PARAM_28] = 0, 211 /* Passive Scan Parameters */ 212 [WL18XX_CONF_SG_PARAM_29] = 0, 213 [WL18XX_CONF_SG_PARAM_30] = 0, 214 [WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, 215 /* Passive Scan in Dual Antenna Parameters */ 216 [WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0, 217 [WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN] = 0, 218 [WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0, 219 /* General Parameters */ 220 [WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1, 221 [WL18XX_CONF_SG_PARAM_36] = 0, 222 [WL18XX_CONF_SG_BEACON_MISS_PERCENT] = 60, 223 [WL18XX_CONF_SG_PARAM_38] = 0, 224 [WL18XX_CONF_SG_RXT] = 1200, 225 [WL18XX_CONF_SG_UNUSED] = 0, 226 [WL18XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1, 227 [WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3, 228 [WL18XX_CONF_SG_HV3_MAX_SERVED] = 6, 229 [WL18XX_CONF_SG_PARAM_44] = 0, 230 [WL18XX_CONF_SG_PARAM_45] = 0, 231 [WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2, 232 [WL18XX_CONF_SG_GEMINI_PARAM_47] = 0, 233 [WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 0, 234 /* AP Parameters */ 235 [WL18XX_CONF_SG_AP_BEACON_MISS_TX] = 3, 236 [WL18XX_CONF_SG_PARAM_50] = 0, 237 [WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL] = 2, 238 [WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME] = 30, 239 [WL18XX_CONF_SG_PARAM_53] = 0, 240 [WL18XX_CONF_SG_PARAM_54] = 0, 241 /* CTS Diluting Parameters */ 242 [WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0, 243 [WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0, 244 [WL18XX_CONF_SG_TEMP_PARAM_1] = 0, 245 [WL18XX_CONF_SG_TEMP_PARAM_2] = 0, 246 [WL18XX_CONF_SG_TEMP_PARAM_3] = 0, 247 [WL18XX_CONF_SG_TEMP_PARAM_4] = 0, 248 [WL18XX_CONF_SG_TEMP_PARAM_5] = 0, 249 [WL18XX_CONF_SG_TEMP_PARAM_6] = 0, 250 [WL18XX_CONF_SG_TEMP_PARAM_7] = 0, 251 [WL18XX_CONF_SG_TEMP_PARAM_8] = 0, 252 [WL18XX_CONF_SG_TEMP_PARAM_9] = 0, 253 [WL18XX_CONF_SG_TEMP_PARAM_10] = 0, 254 }, 255 .state = CONF_SG_PROTECTIVE, 256 }, 257 .rx = { 258 .rx_msdu_life_time = 512000, 259 .packet_detection_threshold = 0, 260 .ps_poll_timeout = 15, 261 .upsd_timeout = 15, 262 .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD, 263 .rx_cca_threshold = 0, 264 .irq_blk_threshold = 0xFFFF, 265 .irq_pkt_threshold = 0, 266 .irq_timeout = 600, 267 .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, 268 }, 269 .tx = { 270 .tx_energy_detection = 0, 271 .sta_rc_conf = { 272 .enabled_rates = 0, 273 .short_retry_limit = 10, 274 .long_retry_limit = 10, 275 .aflags = 0, 276 }, 277 .ac_conf_count = 4, 278 .ac_conf = { 279 [CONF_TX_AC_BE] = { 280 .ac = CONF_TX_AC_BE, 281 .cw_min = 15, 282 .cw_max = 63, 283 .aifsn = 3, 284 .tx_op_limit = 0, 285 }, 286 [CONF_TX_AC_BK] = { 287 .ac = CONF_TX_AC_BK, 288 .cw_min = 15, 289 .cw_max = 63, 290 .aifsn = 7, 291 .tx_op_limit = 0, 292 }, 293 [CONF_TX_AC_VI] = { 294 .ac = CONF_TX_AC_VI, 295 .cw_min = 15, 296 .cw_max = 63, 297 .aifsn = CONF_TX_AIFS_PIFS, 298 .tx_op_limit = 3008, 299 }, 300 [CONF_TX_AC_VO] = { 301 .ac = CONF_TX_AC_VO, 302 .cw_min = 15, 303 .cw_max = 63, 304 .aifsn = CONF_TX_AIFS_PIFS, 305 .tx_op_limit = 1504, 306 }, 307 }, 308 .max_tx_retries = 100, 309 .ap_aging_period = 300, 310 .tid_conf_count = 4, 311 .tid_conf = { 312 [CONF_TX_AC_BE] = { 313 .queue_id = CONF_TX_AC_BE, 314 .channel_type = CONF_CHANNEL_TYPE_EDCF, 315 .tsid = CONF_TX_AC_BE, 316 .ps_scheme = CONF_PS_SCHEME_LEGACY, 317 .ack_policy = CONF_ACK_POLICY_LEGACY, 318 .apsd_conf = {0, 0}, 319 }, 320 [CONF_TX_AC_BK] = { 321 .queue_id = CONF_TX_AC_BK, 322 .channel_type = CONF_CHANNEL_TYPE_EDCF, 323 .tsid = CONF_TX_AC_BK, 324 .ps_scheme = CONF_PS_SCHEME_LEGACY, 325 .ack_policy = CONF_ACK_POLICY_LEGACY, 326 .apsd_conf = {0, 0}, 327 }, 328 [CONF_TX_AC_VI] = { 329 .queue_id = CONF_TX_AC_VI, 330 .channel_type = CONF_CHANNEL_TYPE_EDCF, 331 .tsid = CONF_TX_AC_VI, 332 .ps_scheme = CONF_PS_SCHEME_LEGACY, 333 .ack_policy = CONF_ACK_POLICY_LEGACY, 334 .apsd_conf = {0, 0}, 335 }, 336 [CONF_TX_AC_VO] = { 337 .queue_id = CONF_TX_AC_VO, 338 .channel_type = CONF_CHANNEL_TYPE_EDCF, 339 .tsid = CONF_TX_AC_VO, 340 .ps_scheme = CONF_PS_SCHEME_LEGACY, 341 .ack_policy = CONF_ACK_POLICY_LEGACY, 342 .apsd_conf = {0, 0}, 343 }, 344 }, 345 .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, 346 .tx_compl_timeout = 350, 347 .tx_compl_threshold = 10, 348 .basic_rate = CONF_HW_BIT_RATE_1MBPS, 349 .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, 350 .tmpl_short_retry_limit = 10, 351 .tmpl_long_retry_limit = 10, 352 .tx_watchdog_timeout = 5000, 353 .slow_link_thold = 3, 354 .fast_link_thold = 30, 355 }, 356 .conn = { 357 .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, 358 .listen_interval = 1, 359 .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM, 360 .suspend_listen_interval = 3, 361 .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, 362 .bcn_filt_ie_count = 3, 363 .bcn_filt_ie = { 364 [0] = { 365 .ie = WLAN_EID_CHANNEL_SWITCH, 366 .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, 367 }, 368 [1] = { 369 .ie = WLAN_EID_HT_OPERATION, 370 .rule = CONF_BCN_RULE_PASS_ON_CHANGE, 371 }, 372 [2] = { 373 .ie = WLAN_EID_ERP_INFO, 374 .rule = CONF_BCN_RULE_PASS_ON_CHANGE, 375 }, 376 }, 377 .synch_fail_thold = 12, 378 .bss_lose_timeout = 400, 379 .beacon_rx_timeout = 10000, 380 .broadcast_timeout = 20000, 381 .rx_broadcast_in_ps = 1, 382 .ps_poll_threshold = 10, 383 .bet_enable = CONF_BET_MODE_ENABLE, 384 .bet_max_consecutive = 50, 385 .psm_entry_retries = 8, 386 .psm_exit_retries = 16, 387 .psm_entry_nullfunc_retries = 3, 388 .dynamic_ps_timeout = 1500, 389 .forced_ps = false, 390 .keep_alive_interval = 55000, 391 .max_listen_interval = 20, 392 .sta_sleep_auth = WL1271_PSM_ILLEGAL, 393 .suspend_rx_ba_activity = 0, 394 }, 395 .itrim = { 396 .enable = false, 397 .timeout = 50000, 398 }, 399 .pm_config = { 400 .host_clk_settling_time = 5000, 401 .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE, 402 }, 403 .roam_trigger = { 404 .trigger_pacing = 1, 405 .avg_weight_rssi_beacon = 20, 406 .avg_weight_rssi_data = 10, 407 .avg_weight_snr_beacon = 20, 408 .avg_weight_snr_data = 10, 409 }, 410 .scan = { 411 .min_dwell_time_active = 7500, 412 .max_dwell_time_active = 30000, 413 .min_dwell_time_active_long = 25000, 414 .max_dwell_time_active_long = 50000, 415 .dwell_time_passive = 100000, 416 .dwell_time_dfs = 150000, 417 .num_probe_reqs = 2, 418 .split_scan_timeout = 50000, 419 }, 420 .sched_scan = { 421 /* 422 * Values are in TU/1000 but since sched scan FW command 423 * params are in TUs rounding up may occur. 424 */ 425 .base_dwell_time = 7500, 426 .max_dwell_time_delta = 22500, 427 /* based on 250bits per probe @1Mbps */ 428 .dwell_time_delta_per_probe = 2000, 429 /* based on 250bits per probe @6Mbps (plus a bit more) */ 430 .dwell_time_delta_per_probe_5 = 350, 431 .dwell_time_passive = 100000, 432 .dwell_time_dfs = 150000, 433 .num_probe_reqs = 2, 434 .rssi_threshold = -90, 435 .snr_threshold = 0, 436 .num_short_intervals = SCAN_MAX_SHORT_INTERVALS, 437 .long_interval = 30000, 438 }, 439 .ht = { 440 .rx_ba_win_size = 32, 441 .tx_ba_win_size = 64, 442 .inactivity_timeout = 10000, 443 .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP, 444 }, 445 .mem = { 446 .num_stations = 1, 447 .ssid_profiles = 1, 448 .rx_block_num = 40, 449 .tx_min_block_num = 40, 450 .dynamic_memory = 1, 451 .min_req_tx_blocks = 45, 452 .min_req_rx_blocks = 22, 453 .tx_min = 27, 454 }, 455 .fm_coex = { 456 .enable = true, 457 .swallow_period = 5, 458 .n_divider_fref_set_1 = 0xff, /* default */ 459 .n_divider_fref_set_2 = 12, 460 .m_divider_fref_set_1 = 0xffff, 461 .m_divider_fref_set_2 = 148, /* default */ 462 .coex_pll_stabilization_time = 0xffffffff, /* default */ 463 .ldo_stabilization_time = 0xffff, /* default */ 464 .fm_disturbed_band_margin = 0xff, /* default */ 465 .swallow_clk_diff = 0xff, /* default */ 466 }, 467 .rx_streaming = { 468 .duration = 150, 469 .queues = 0x1, 470 .interval = 20, 471 .always = 0, 472 }, 473 .fwlog = { 474 .mode = WL12XX_FWLOG_CONTINUOUS, 475 .mem_blocks = 0, 476 .severity = 0, 477 .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED, 478 .output = WL12XX_FWLOG_OUTPUT_DBG_PINS, 479 .threshold = 0, 480 }, 481 .rate = { 482 .rate_retry_score = 32000, 483 .per_add = 8192, 484 .per_th1 = 2048, 485 .per_th2 = 4096, 486 .max_per = 8100, 487 .inverse_curiosity_factor = 5, 488 .tx_fail_low_th = 4, 489 .tx_fail_high_th = 10, 490 .per_alpha_shift = 4, 491 .per_add_shift = 13, 492 .per_beta1_shift = 10, 493 .per_beta2_shift = 8, 494 .rate_check_up = 2, 495 .rate_check_down = 12, 496 .rate_retry_policy = { 497 0x00, 0x00, 0x00, 0x00, 0x00, 498 0x00, 0x00, 0x00, 0x00, 0x00, 499 0x00, 0x00, 0x00, 500 }, 501 }, 502 .hangover = { 503 .recover_time = 0, 504 .hangover_period = 20, 505 .dynamic_mode = 1, 506 .early_termination_mode = 1, 507 .max_period = 20, 508 .min_period = 1, 509 .increase_delta = 1, 510 .decrease_delta = 2, 511 .quiet_time = 4, 512 .increase_time = 1, 513 .window_size = 16, 514 }, 515 .recovery = { 516 .bug_on_recovery = 0, 517 .no_recovery = 0, 518 }, 519 }; 520 521 static struct wl18xx_priv_conf wl18xx_default_priv_conf = { 522 .ht = { 523 .mode = HT_MODE_WIDE, 524 }, 525 .phy = { 526 .phy_standalone = 0x00, 527 .primary_clock_setting_time = 0x05, 528 .clock_valid_on_wake_up = 0x00, 529 .secondary_clock_setting_time = 0x05, 530 .board_type = BOARD_TYPE_HDK_18XX, 531 .auto_detect = 0x00, 532 .dedicated_fem = FEM_NONE, 533 .low_band_component = COMPONENT_3_WAY_SWITCH, 534 .low_band_component_type = 0x05, 535 .high_band_component = COMPONENT_2_WAY_SWITCH, 536 .high_band_component_type = 0x09, 537 .tcxo_ldo_voltage = 0x00, 538 .xtal_itrim_val = 0x04, 539 .srf_state = 0x00, 540 .io_configuration = 0x01, 541 .sdio_configuration = 0x00, 542 .settings = 0x00, 543 .enable_clpc = 0x00, 544 .enable_tx_low_pwr_on_siso_rdl = 0x00, 545 .rx_profile = 0x00, 546 .pwr_limit_reference_11_abg = 0x64, 547 .per_chan_pwr_limit_arr_11abg = { 548 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 549 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 550 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 551 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 552 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 553 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 554 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 555 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 556 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 557 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 558 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 559 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 560 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 561 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 562 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 563 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 564 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }, 565 .pwr_limit_reference_11p = 0x64, 566 .per_chan_bo_mode_11_abg = { 0x00, 0x00, 0x00, 0x00, 567 0x00, 0x00, 0x00, 0x00, 568 0x00, 0x00, 0x00, 0x00, 569 0x00 }, 570 .per_chan_bo_mode_11_p = { 0x00, 0x00, 0x00, 0x00 }, 571 .per_chan_pwr_limit_arr_11p = { 0xff, 0xff, 0xff, 0xff, 572 0xff, 0xff, 0xff }, 573 .psat = 0, 574 .external_pa_dc2dc = 0, 575 .number_of_assembled_ant2_4 = 2, 576 .number_of_assembled_ant5 = 1, 577 .low_power_val = 0xff, 578 .med_power_val = 0xff, 579 .high_power_val = 0xff, 580 .low_power_val_2nd = 0xff, 581 .med_power_val_2nd = 0xff, 582 .high_power_val_2nd = 0xff, 583 .tx_rf_margin = 1, 584 }, 585 .ap_sleep = { /* disabled by default */ 586 .idle_duty_cycle = 0, 587 .connected_duty_cycle = 0, 588 .max_stations_thresh = 0, 589 .idle_conn_thresh = 0, 590 }, 591 }; 592 593 static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = { 594 [PART_TOP_PRCM_ELP_SOC] = { 595 .mem = { .start = 0x00A00000, .size = 0x00012000 }, 596 .reg = { .start = 0x00807000, .size = 0x00005000 }, 597 .mem2 = { .start = 0x00800000, .size = 0x0000B000 }, 598 .mem3 = { .start = 0x00401594, .size = 0x00001020 }, 599 }, 600 [PART_DOWN] = { 601 .mem = { .start = 0x00000000, .size = 0x00014000 }, 602 .reg = { .start = 0x00810000, .size = 0x0000BFFF }, 603 .mem2 = { .start = 0x00000000, .size = 0x00000000 }, 604 .mem3 = { .start = 0x00000000, .size = 0x00000000 }, 605 }, 606 [PART_BOOT] = { 607 .mem = { .start = 0x00700000, .size = 0x0000030c }, 608 .reg = { .start = 0x00802000, .size = 0x00014578 }, 609 .mem2 = { .start = 0x00B00404, .size = 0x00001000 }, 610 .mem3 = { .start = 0x00C00000, .size = 0x00000400 }, 611 }, 612 [PART_WORK] = { 613 .mem = { .start = 0x00800000, .size = 0x000050FC }, 614 .reg = { .start = 0x00B00404, .size = 0x00001000 }, 615 .mem2 = { .start = 0x00C00000, .size = 0x00000400 }, 616 .mem3 = { .start = 0x00401594, .size = 0x00001020 }, 617 }, 618 [PART_PHY_INIT] = { 619 .mem = { .start = WL18XX_PHY_INIT_MEM_ADDR, 620 .size = WL18XX_PHY_INIT_MEM_SIZE }, 621 .reg = { .start = 0x00000000, .size = 0x00000000 }, 622 .mem2 = { .start = 0x00000000, .size = 0x00000000 }, 623 .mem3 = { .start = 0x00000000, .size = 0x00000000 }, 624 }, 625 }; 626 627 static const int wl18xx_rtable[REG_TABLE_LEN] = { 628 [REG_ECPU_CONTROL] = WL18XX_REG_ECPU_CONTROL, 629 [REG_INTERRUPT_NO_CLEAR] = WL18XX_REG_INTERRUPT_NO_CLEAR, 630 [REG_INTERRUPT_ACK] = WL18XX_REG_INTERRUPT_ACK, 631 [REG_COMMAND_MAILBOX_PTR] = WL18XX_REG_COMMAND_MAILBOX_PTR, 632 [REG_EVENT_MAILBOX_PTR] = WL18XX_REG_EVENT_MAILBOX_PTR, 633 [REG_INTERRUPT_TRIG] = WL18XX_REG_INTERRUPT_TRIG_H, 634 [REG_INTERRUPT_MASK] = WL18XX_REG_INTERRUPT_MASK, 635 [REG_PC_ON_RECOVERY] = WL18XX_SCR_PAD4, 636 [REG_CHIP_ID_B] = WL18XX_REG_CHIP_ID_B, 637 [REG_CMD_MBOX_ADDRESS] = WL18XX_CMD_MBOX_ADDRESS, 638 639 /* data access memory addresses, used with partition translation */ 640 [REG_SLV_MEM_DATA] = WL18XX_SLV_MEM_DATA, 641 [REG_SLV_REG_DATA] = WL18XX_SLV_REG_DATA, 642 643 /* raw data access memory addresses */ 644 [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR, 645 }; 646 647 static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = { 648 [CLOCK_CONFIG_16_2_M] = { 8, 121, 0, 0, false }, 649 [CLOCK_CONFIG_16_368_M] = { 8, 120, 0, 0, false }, 650 [CLOCK_CONFIG_16_8_M] = { 8, 117, 0, 0, false }, 651 [CLOCK_CONFIG_19_2_M] = { 10, 128, 0, 0, false }, 652 [CLOCK_CONFIG_26_M] = { 11, 104, 0, 0, false }, 653 [CLOCK_CONFIG_32_736_M] = { 8, 120, 0, 0, false }, 654 [CLOCK_CONFIG_33_6_M] = { 8, 117, 0, 0, false }, 655 [CLOCK_CONFIG_38_468_M] = { 10, 128, 0, 0, false }, 656 [CLOCK_CONFIG_52_M] = { 11, 104, 0, 0, false }, 657 }; 658 659 static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { 660 [CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true }, 661 [CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true }, 662 [CLOCK_CONFIG_16_8_M] = { 7, 100, 0, 0, false }, 663 [CLOCK_CONFIG_19_2_M] = { 8, 100, 0, 0, false }, 664 [CLOCK_CONFIG_26_M] = { 13, 120, 0, 0, false }, 665 [CLOCK_CONFIG_32_736_M] = { 9, 132, 3751, 4, true }, 666 [CLOCK_CONFIG_33_6_M] = { 7, 100, 0, 0, false }, 667 [CLOCK_CONFIG_38_468_M] = { 8, 100, 0, 0, false }, 668 [CLOCK_CONFIG_52_M] = { 13, 120, 0, 0, false }, 669 }; 670 671 /* TODO: maybe move to a new header file? */ 672 #define WL18XX_FW_NAME "ti-connectivity/wl18xx-fw-4.bin" 673 674 static int wl18xx_identify_chip(struct wl1271 *wl) 675 { 676 int ret = 0; 677 678 switch (wl->chip.id) { 679 case CHIP_ID_185x_PG20: 680 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (185x PG20)", 681 wl->chip.id); 682 wl->sr_fw_name = WL18XX_FW_NAME; 683 /* wl18xx uses the same firmware for PLT */ 684 wl->plt_fw_name = WL18XX_FW_NAME; 685 wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN | 686 WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | 687 WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN | 688 WLCORE_QUIRK_TX_PAD_LAST_FRAME | 689 WLCORE_QUIRK_REGDOMAIN_CONF | 690 WLCORE_QUIRK_DUAL_PROBE_TMPL; 691 692 wlcore_set_min_fw_ver(wl, WL18XX_CHIP_VER, 693 WL18XX_IFTYPE_VER, WL18XX_MAJOR_VER, 694 WL18XX_SUBTYPE_VER, WL18XX_MINOR_VER, 695 /* there's no separate multi-role FW */ 696 0, 0, 0, 0); 697 break; 698 case CHIP_ID_185x_PG10: 699 wl1271_warning("chip id 0x%x (185x PG10) is deprecated", 700 wl->chip.id); 701 ret = -ENODEV; 702 goto out; 703 704 default: 705 wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); 706 ret = -ENODEV; 707 goto out; 708 } 709 710 wl->fw_mem_block_size = 272; 711 wl->fwlog_end = 0x40000000; 712 713 wl->scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; 714 wl->scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; 715 wl->sched_scan_templ_id_2_4 = CMD_TEMPL_PROBE_REQ_2_4_PERIODIC; 716 wl->sched_scan_templ_id_5 = CMD_TEMPL_PROBE_REQ_5_PERIODIC; 717 wl->max_channels_5 = WL18XX_MAX_CHANNELS_5GHZ; 718 wl->ba_rx_session_count_max = WL18XX_RX_BA_MAX_SESSIONS; 719 out: 720 return ret; 721 } 722 723 static int wl18xx_set_clk(struct wl1271 *wl) 724 { 725 u16 clk_freq; 726 int ret; 727 728 ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); 729 if (ret < 0) 730 goto out; 731 732 /* TODO: PG2: apparently we need to read the clk type */ 733 734 ret = wl18xx_top_reg_read(wl, PRIMARY_CLK_DETECT, &clk_freq); 735 if (ret < 0) 736 goto out; 737 738 wl1271_debug(DEBUG_BOOT, "clock freq %d (%d, %d, %d, %d, %s)", clk_freq, 739 wl18xx_clk_table[clk_freq].n, wl18xx_clk_table[clk_freq].m, 740 wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q, 741 wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit"); 742 743 /* coex PLL configuration */ 744 ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N, 745 wl18xx_clk_table_coex[clk_freq].n); 746 if (ret < 0) 747 goto out; 748 749 ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M, 750 wl18xx_clk_table_coex[clk_freq].m); 751 if (ret < 0) 752 goto out; 753 754 /* bypass the swallowing logic */ 755 ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, 756 PLLSH_COEX_PLL_SWALLOW_EN_VAL1); 757 if (ret < 0) 758 goto out; 759 760 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, 761 wl18xx_clk_table[clk_freq].n); 762 if (ret < 0) 763 goto out; 764 765 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_M, 766 wl18xx_clk_table[clk_freq].m); 767 if (ret < 0) 768 goto out; 769 770 if (wl18xx_clk_table[clk_freq].swallow) { 771 /* first the 16 lower bits */ 772 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_1, 773 wl18xx_clk_table[clk_freq].q & 774 PLLSH_WCS_PLL_Q_FACTOR_CFG_1_MASK); 775 if (ret < 0) 776 goto out; 777 778 /* then the 16 higher bits, masked out */ 779 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_Q_FACTOR_CFG_2, 780 (wl18xx_clk_table[clk_freq].q >> 16) & 781 PLLSH_WCS_PLL_Q_FACTOR_CFG_2_MASK); 782 if (ret < 0) 783 goto out; 784 785 /* first the 16 lower bits */ 786 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_1, 787 wl18xx_clk_table[clk_freq].p & 788 PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK); 789 if (ret < 0) 790 goto out; 791 792 /* then the 16 higher bits, masked out */ 793 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_P_FACTOR_CFG_2, 794 (wl18xx_clk_table[clk_freq].p >> 16) & 795 PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK); 796 } else { 797 ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_SWALLOW_EN, 798 PLLSH_WCS_PLL_SWALLOW_EN_VAL2); 799 } 800 801 /* choose WCS PLL */ 802 ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL, 803 PLLSH_WL_PLL_SEL_WCS_PLL); 804 if (ret < 0) 805 goto out; 806 807 /* enable both PLLs */ 808 ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1); 809 if (ret < 0) 810 goto out; 811 812 udelay(1000); 813 814 /* disable coex PLL */ 815 ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2); 816 if (ret < 0) 817 goto out; 818 819 /* reset the swallowing logic */ 820 ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, 821 PLLSH_COEX_PLL_SWALLOW_EN_VAL2); 822 if (ret < 0) 823 goto out; 824 825 out: 826 return ret; 827 } 828 829 static int wl18xx_boot_soft_reset(struct wl1271 *wl) 830 { 831 int ret; 832 833 /* disable Rx/Tx */ 834 ret = wlcore_write32(wl, WL18XX_ENABLE, 0x0); 835 if (ret < 0) 836 goto out; 837 838 /* disable auto calibration on start*/ 839 ret = wlcore_write32(wl, WL18XX_SPARE_A2, 0xffff); 840 841 out: 842 return ret; 843 } 844 845 static int wl18xx_pre_boot(struct wl1271 *wl) 846 { 847 int ret; 848 849 ret = wl18xx_set_clk(wl); 850 if (ret < 0) 851 goto out; 852 853 /* Continue the ELP wake up sequence */ 854 ret = wlcore_write32(wl, WL18XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); 855 if (ret < 0) 856 goto out; 857 858 udelay(500); 859 860 ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); 861 if (ret < 0) 862 goto out; 863 864 /* Disable interrupts */ 865 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); 866 if (ret < 0) 867 goto out; 868 869 ret = wl18xx_boot_soft_reset(wl); 870 871 out: 872 return ret; 873 } 874 875 static int wl18xx_pre_upload(struct wl1271 *wl) 876 { 877 u32 tmp; 878 int ret; 879 u16 irq_invert; 880 881 BUILD_BUG_ON(sizeof(struct wl18xx_mac_and_phy_params) > 882 WL18XX_PHY_INIT_MEM_SIZE); 883 884 ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); 885 if (ret < 0) 886 goto out; 887 888 /* TODO: check if this is all needed */ 889 ret = wlcore_write32(wl, WL18XX_EEPROMLESS_IND, WL18XX_EEPROMLESS_IND); 890 if (ret < 0) 891 goto out; 892 893 ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp); 894 if (ret < 0) 895 goto out; 896 897 wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); 898 899 ret = wlcore_read32(wl, WL18XX_SCR_PAD2, &tmp); 900 if (ret < 0) 901 goto out; 902 903 /* 904 * Workaround for FDSP code RAM corruption (needed for PG2.1 905 * and newer; for older chips it's a NOP). Change FDSP clock 906 * settings so that it's muxed to the ATGP clock instead of 907 * its own clock. 908 */ 909 910 ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); 911 if (ret < 0) 912 goto out; 913 914 /* disable FDSP clock */ 915 ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, 916 MEM_FDSP_CLK_120_DISABLE); 917 if (ret < 0) 918 goto out; 919 920 /* set ATPG clock toward FDSP Code RAM rather than its own clock */ 921 ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, 922 MEM_FDSP_CODERAM_FUNC_CLK_SEL); 923 if (ret < 0) 924 goto out; 925 926 /* re-enable FDSP clock */ 927 ret = wlcore_write32(wl, WL18XX_PHY_FPGA_SPARE_1, 928 MEM_FDSP_CLK_120_ENABLE); 929 if (ret < 0) 930 goto out; 931 932 ret = irq_get_trigger_type(wl->irq); 933 if ((ret == IRQ_TYPE_LEVEL_LOW) || (ret == IRQ_TYPE_EDGE_FALLING)) { 934 wl1271_info("using inverted interrupt logic: %d", ret); 935 ret = wlcore_set_partition(wl, 936 &wl->ptable[PART_TOP_PRCM_ELP_SOC]); 937 if (ret < 0) 938 goto out; 939 940 ret = wl18xx_top_reg_read(wl, TOP_FN0_CCCR_REG_32, &irq_invert); 941 if (ret < 0) 942 goto out; 943 944 irq_invert |= BIT(1); 945 ret = wl18xx_top_reg_write(wl, TOP_FN0_CCCR_REG_32, irq_invert); 946 if (ret < 0) 947 goto out; 948 949 ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); 950 } 951 952 out: 953 return ret; 954 } 955 956 static int wl18xx_set_mac_and_phy(struct wl1271 *wl) 957 { 958 struct wl18xx_priv *priv = wl->priv; 959 struct wl18xx_mac_and_phy_params *params; 960 int ret; 961 962 params = kmemdup(&priv->conf.phy, sizeof(*params), GFP_KERNEL); 963 if (!params) { 964 ret = -ENOMEM; 965 goto out; 966 } 967 968 ret = wlcore_set_partition(wl, &wl->ptable[PART_PHY_INIT]); 969 if (ret < 0) 970 goto out; 971 972 ret = wlcore_write(wl, WL18XX_PHY_INIT_MEM_ADDR, params, 973 sizeof(*params), false); 974 975 out: 976 kfree(params); 977 return ret; 978 } 979 980 static int wl18xx_enable_interrupts(struct wl1271 *wl) 981 { 982 u32 event_mask, intr_mask; 983 int ret; 984 985 event_mask = WL18XX_ACX_EVENTS_VECTOR; 986 intr_mask = WL18XX_INTR_MASK; 987 988 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, event_mask); 989 if (ret < 0) 990 goto out; 991 992 wlcore_enable_interrupts(wl); 993 994 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, 995 WL1271_ACX_INTR_ALL & ~intr_mask); 996 if (ret < 0) 997 goto disable_interrupts; 998 999 return ret; 1000 1001 disable_interrupts: 1002 wlcore_disable_interrupts(wl); 1003 1004 out: 1005 return ret; 1006 } 1007 1008 static int wl18xx_boot(struct wl1271 *wl) 1009 { 1010 int ret; 1011 1012 ret = wl18xx_pre_boot(wl); 1013 if (ret < 0) 1014 goto out; 1015 1016 ret = wl18xx_pre_upload(wl); 1017 if (ret < 0) 1018 goto out; 1019 1020 ret = wlcore_boot_upload_firmware(wl); 1021 if (ret < 0) 1022 goto out; 1023 1024 ret = wl18xx_set_mac_and_phy(wl); 1025 if (ret < 0) 1026 goto out; 1027 1028 wl->event_mask = BSS_LOSS_EVENT_ID | 1029 SCAN_COMPLETE_EVENT_ID | 1030 RADAR_DETECTED_EVENT_ID | 1031 RSSI_SNR_TRIGGER_0_EVENT_ID | 1032 PERIODIC_SCAN_COMPLETE_EVENT_ID | 1033 PERIODIC_SCAN_REPORT_EVENT_ID | 1034 DUMMY_PACKET_EVENT_ID | 1035 PEER_REMOVE_COMPLETE_EVENT_ID | 1036 BA_SESSION_RX_CONSTRAINT_EVENT_ID | 1037 REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | 1038 INACTIVE_STA_EVENT_ID | 1039 CHANNEL_SWITCH_COMPLETE_EVENT_ID | 1040 DFS_CHANNELS_CONFIG_COMPLETE_EVENT | 1041 SMART_CONFIG_SYNC_EVENT_ID | 1042 SMART_CONFIG_DECODE_EVENT_ID | 1043 TIME_SYNC_EVENT_ID | 1044 FW_LOGGER_INDICATION; 1045 1046 wl->ap_event_mask = MAX_TX_FAILURE_EVENT_ID; 1047 1048 ret = wlcore_boot_run_firmware(wl); 1049 if (ret < 0) 1050 goto out; 1051 1052 ret = wl18xx_enable_interrupts(wl); 1053 1054 out: 1055 return ret; 1056 } 1057 1058 static int wl18xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr, 1059 void *buf, size_t len) 1060 { 1061 struct wl18xx_priv *priv = wl->priv; 1062 1063 memcpy(priv->cmd_buf, buf, len); 1064 memset(priv->cmd_buf + len, 0, WL18XX_CMD_MAX_SIZE - len); 1065 1066 return wlcore_write(wl, cmd_box_addr, priv->cmd_buf, 1067 WL18XX_CMD_MAX_SIZE, false); 1068 } 1069 1070 static int wl18xx_ack_event(struct wl1271 *wl) 1071 { 1072 return wlcore_write_reg(wl, REG_INTERRUPT_TRIG, 1073 WL18XX_INTR_TRIG_EVENT_ACK); 1074 } 1075 1076 static u32 wl18xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks) 1077 { 1078 u32 blk_size = WL18XX_TX_HW_BLOCK_SIZE; 1079 return (len + blk_size - 1) / blk_size + spare_blks; 1080 } 1081 1082 static void 1083 wl18xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, 1084 u32 blks, u32 spare_blks) 1085 { 1086 desc->wl18xx_mem.total_mem_blocks = blks; 1087 } 1088 1089 static void 1090 wl18xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, 1091 struct sk_buff *skb) 1092 { 1093 desc->length = cpu_to_le16(skb->len); 1094 1095 /* if only the last frame is to be padded, we unset this bit on Tx */ 1096 if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) 1097 desc->wl18xx_mem.ctrl = WL18XX_TX_CTRL_NOT_PADDED; 1098 else 1099 desc->wl18xx_mem.ctrl = 0; 1100 1101 wl1271_debug(DEBUG_TX, "tx_fill_hdr: hlid: %d " 1102 "len: %d life: %d mem: %d", desc->hlid, 1103 le16_to_cpu(desc->length), 1104 le16_to_cpu(desc->life_time), 1105 desc->wl18xx_mem.total_mem_blocks); 1106 } 1107 1108 static enum wl_rx_buf_align 1109 wl18xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc) 1110 { 1111 if (rx_desc & RX_BUF_PADDED_PAYLOAD) 1112 return WLCORE_RX_BUF_PADDED; 1113 1114 return WLCORE_RX_BUF_ALIGNED; 1115 } 1116 1117 static u32 wl18xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data, 1118 u32 data_len) 1119 { 1120 struct wl1271_rx_descriptor *desc = rx_data; 1121 1122 /* invalid packet */ 1123 if (data_len < sizeof(*desc)) 1124 return 0; 1125 1126 return data_len - sizeof(*desc); 1127 } 1128 1129 static void wl18xx_tx_immediate_completion(struct wl1271 *wl) 1130 { 1131 wl18xx_tx_immediate_complete(wl); 1132 } 1133 1134 static int wl18xx_set_host_cfg_bitmap(struct wl1271 *wl, u32 extra_mem_blk) 1135 { 1136 int ret; 1137 u32 sdio_align_size = 0; 1138 u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE | 1139 HOST_IF_CFG_ADD_RX_ALIGNMENT; 1140 1141 /* Enable Tx SDIO padding */ 1142 if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) { 1143 host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; 1144 sdio_align_size = WL12XX_BUS_BLOCK_SIZE; 1145 } 1146 1147 /* Enable Rx SDIO padding */ 1148 if (wl->quirks & WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN) { 1149 host_cfg_bitmap |= HOST_IF_CFG_RX_PAD_TO_SDIO_BLK; 1150 sdio_align_size = WL12XX_BUS_BLOCK_SIZE; 1151 } 1152 1153 ret = wl18xx_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap, 1154 sdio_align_size, extra_mem_blk, 1155 WL18XX_HOST_IF_LEN_SIZE_FIELD); 1156 if (ret < 0) 1157 return ret; 1158 1159 return 0; 1160 } 1161 1162 static int wl18xx_hw_init(struct wl1271 *wl) 1163 { 1164 int ret; 1165 struct wl18xx_priv *priv = wl->priv; 1166 1167 /* (re)init private structures. Relevant on recovery as well. */ 1168 priv->last_fw_rls_idx = 0; 1169 priv->extra_spare_key_count = 0; 1170 1171 /* set the default amount of spare blocks in the bitmap */ 1172 ret = wl18xx_set_host_cfg_bitmap(wl, WL18XX_TX_HW_BLOCK_SPARE); 1173 if (ret < 0) 1174 return ret; 1175 1176 /* set the dynamic fw traces bitmap */ 1177 ret = wl18xx_acx_dynamic_fw_traces(wl); 1178 if (ret < 0) 1179 return ret; 1180 1181 if (checksum_param) { 1182 ret = wl18xx_acx_set_checksum_state(wl); 1183 if (ret != 0) 1184 return ret; 1185 } 1186 1187 return ret; 1188 } 1189 1190 static void wl18xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status, 1191 struct wl_fw_status *fw_status) 1192 { 1193 struct wl18xx_fw_status *int_fw_status = raw_fw_status; 1194 1195 fw_status->intr = le32_to_cpu(int_fw_status->intr); 1196 fw_status->fw_rx_counter = int_fw_status->fw_rx_counter; 1197 fw_status->drv_rx_counter = int_fw_status->drv_rx_counter; 1198 fw_status->tx_results_counter = int_fw_status->tx_results_counter; 1199 fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs; 1200 1201 fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime); 1202 fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap); 1203 fw_status->link_fast_bitmap = 1204 le32_to_cpu(int_fw_status->link_fast_bitmap); 1205 fw_status->total_released_blks = 1206 le32_to_cpu(int_fw_status->total_released_blks); 1207 fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total); 1208 1209 fw_status->counters.tx_released_pkts = 1210 int_fw_status->counters.tx_released_pkts; 1211 fw_status->counters.tx_lnk_free_pkts = 1212 int_fw_status->counters.tx_lnk_free_pkts; 1213 fw_status->counters.tx_voice_released_blks = 1214 int_fw_status->counters.tx_voice_released_blks; 1215 fw_status->counters.tx_last_rate = 1216 int_fw_status->counters.tx_last_rate; 1217 fw_status->counters.tx_last_rate_mbps = 1218 int_fw_status->counters.tx_last_rate_mbps; 1219 fw_status->counters.hlid = 1220 int_fw_status->counters.hlid; 1221 1222 fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr); 1223 1224 fw_status->priv = &int_fw_status->priv; 1225 } 1226 1227 static void wl18xx_set_tx_desc_csum(struct wl1271 *wl, 1228 struct wl1271_tx_hw_descr *desc, 1229 struct sk_buff *skb) 1230 { 1231 u32 ip_hdr_offset; 1232 struct iphdr *ip_hdr; 1233 1234 if (!checksum_param) { 1235 desc->wl18xx_checksum_data = 0; 1236 return; 1237 } 1238 1239 if (skb->ip_summed != CHECKSUM_PARTIAL) { 1240 desc->wl18xx_checksum_data = 0; 1241 return; 1242 } 1243 1244 ip_hdr_offset = skb_network_header(skb) - skb_mac_header(skb); 1245 if (WARN_ON(ip_hdr_offset >= (1<<7))) { 1246 desc->wl18xx_checksum_data = 0; 1247 return; 1248 } 1249 1250 desc->wl18xx_checksum_data = ip_hdr_offset << 1; 1251 1252 /* FW is interested only in the LSB of the protocol TCP=0 UDP=1 */ 1253 ip_hdr = (void *)skb_network_header(skb); 1254 desc->wl18xx_checksum_data |= (ip_hdr->protocol & 0x01); 1255 } 1256 1257 static void wl18xx_set_rx_csum(struct wl1271 *wl, 1258 struct wl1271_rx_descriptor *desc, 1259 struct sk_buff *skb) 1260 { 1261 if (desc->status & WL18XX_RX_CHECKSUM_MASK) 1262 skb->ip_summed = CHECKSUM_UNNECESSARY; 1263 } 1264 1265 static bool wl18xx_is_mimo_supported(struct wl1271 *wl) 1266 { 1267 struct wl18xx_priv *priv = wl->priv; 1268 1269 /* only support MIMO with multiple antennas, and when SISO 1270 * is not forced through config 1271 */ 1272 return (priv->conf.phy.number_of_assembled_ant2_4 >= 2) && 1273 (priv->conf.ht.mode != HT_MODE_WIDE) && 1274 (priv->conf.ht.mode != HT_MODE_SISO20); 1275 } 1276 1277 /* 1278 * TODO: instead of having these two functions to get the rate mask, 1279 * we should modify the wlvif->rate_set instead 1280 */ 1281 static u32 wl18xx_sta_get_ap_rate_mask(struct wl1271 *wl, 1282 struct wl12xx_vif *wlvif) 1283 { 1284 u32 hw_rate_set = wlvif->rate_set; 1285 1286 if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || 1287 wlvif->channel_type == NL80211_CHAN_HT40PLUS) { 1288 wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); 1289 hw_rate_set |= CONF_TX_RATE_USE_WIDE_CHAN; 1290 1291 /* we don't support MIMO in wide-channel mode */ 1292 hw_rate_set &= ~CONF_TX_MIMO_RATES; 1293 } else if (wl18xx_is_mimo_supported(wl)) { 1294 wl1271_debug(DEBUG_ACX, "using MIMO channel rate mask"); 1295 hw_rate_set |= CONF_TX_MIMO_RATES; 1296 } 1297 1298 return hw_rate_set; 1299 } 1300 1301 static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, 1302 struct wl12xx_vif *wlvif) 1303 { 1304 if (wlvif->channel_type == NL80211_CHAN_HT40MINUS || 1305 wlvif->channel_type == NL80211_CHAN_HT40PLUS) { 1306 wl1271_debug(DEBUG_ACX, "using wide channel rate mask"); 1307 1308 /* sanity check - we don't support this */ 1309 if (WARN_ON(wlvif->band != NL80211_BAND_5GHZ)) 1310 return 0; 1311 1312 return CONF_TX_RATE_USE_WIDE_CHAN; 1313 } else if (wl18xx_is_mimo_supported(wl) && 1314 wlvif->band == NL80211_BAND_2GHZ) { 1315 wl1271_debug(DEBUG_ACX, "using MIMO rate mask"); 1316 /* 1317 * we don't care about HT channel here - if a peer doesn't 1318 * support MIMO, we won't enable it in its rates 1319 */ 1320 return CONF_TX_MIMO_RATES; 1321 } else { 1322 return 0; 1323 } 1324 } 1325 1326 static const char *wl18xx_rdl_name(enum wl18xx_rdl_num rdl_num) 1327 { 1328 switch (rdl_num) { 1329 case RDL_1_HP: 1330 return "183xH"; 1331 case RDL_2_SP: 1332 return "183x or 180x"; 1333 case RDL_3_HP: 1334 return "187xH"; 1335 case RDL_4_SP: 1336 return "187x"; 1337 case RDL_5_SP: 1338 return "RDL11 - Not Supported"; 1339 case RDL_6_SP: 1340 return "180xD"; 1341 case RDL_7_SP: 1342 return "RDL13 - Not Supported (1893Q)"; 1343 case RDL_8_SP: 1344 return "18xxQ"; 1345 case RDL_NONE: 1346 return "UNTRIMMED"; 1347 default: 1348 return "UNKNOWN"; 1349 } 1350 } 1351 1352 static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) 1353 { 1354 u32 fuse; 1355 s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0, package_type = 0; 1356 int ret; 1357 1358 ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); 1359 if (ret < 0) 1360 goto out; 1361 1362 ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse); 1363 if (ret < 0) 1364 goto out; 1365 1366 package_type = (fuse >> WL18XX_PACKAGE_TYPE_OFFSET) & 1; 1367 1368 ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse); 1369 if (ret < 0) 1370 goto out; 1371 1372 pg_ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET; 1373 rom = (fuse & WL18XX_ROM_VER_MASK) >> WL18XX_ROM_VER_OFFSET; 1374 1375 if ((rom <= 0xE) && (package_type == WL18XX_PACKAGE_TYPE_WSP)) 1376 metal = (fuse & WL18XX_METAL_VER_MASK) >> 1377 WL18XX_METAL_VER_OFFSET; 1378 else 1379 metal = (fuse & WL18XX_NEW_METAL_VER_MASK) >> 1380 WL18XX_NEW_METAL_VER_OFFSET; 1381 1382 ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse); 1383 if (ret < 0) 1384 goto out; 1385 1386 rdl_ver = (fuse & WL18XX_RDL_VER_MASK) >> WL18XX_RDL_VER_OFFSET; 1387 1388 wl1271_info("wl18xx HW: %s, PG %d.%d (ROM 0x%x)", 1389 wl18xx_rdl_name(rdl_ver), pg_ver, metal, rom); 1390 1391 if (ver) 1392 *ver = pg_ver; 1393 1394 ret = wlcore_set_partition(wl, &wl->ptable[PART_BOOT]); 1395 1396 out: 1397 return ret; 1398 } 1399 1400 #define WL18XX_CONF_FILE_NAME "ti-connectivity/wl18xx-conf.bin" 1401 1402 static int wl18xx_load_conf_file(struct device *dev, struct wlcore_conf *conf, 1403 struct wl18xx_priv_conf *priv_conf) 1404 { 1405 struct wlcore_conf_file *conf_file; 1406 const struct firmware *fw; 1407 int ret; 1408 1409 ret = request_firmware(&fw, WL18XX_CONF_FILE_NAME, dev); 1410 if (ret < 0) { 1411 wl1271_error("could not get configuration binary %s: %d", 1412 WL18XX_CONF_FILE_NAME, ret); 1413 return ret; 1414 } 1415 1416 if (fw->size != WL18XX_CONF_SIZE) { 1417 wl1271_error("configuration binary file size is wrong, expected %zu got %zu", 1418 WL18XX_CONF_SIZE, fw->size); 1419 ret = -EINVAL; 1420 goto out_release; 1421 } 1422 1423 conf_file = (struct wlcore_conf_file *) fw->data; 1424 1425 if (conf_file->header.magic != cpu_to_le32(WL18XX_CONF_MAGIC)) { 1426 wl1271_error("configuration binary file magic number mismatch, " 1427 "expected 0x%0x got 0x%0x", WL18XX_CONF_MAGIC, 1428 conf_file->header.magic); 1429 ret = -EINVAL; 1430 goto out_release; 1431 } 1432 1433 if (conf_file->header.version != cpu_to_le32(WL18XX_CONF_VERSION)) { 1434 wl1271_error("configuration binary file version not supported, " 1435 "expected 0x%08x got 0x%08x", 1436 WL18XX_CONF_VERSION, conf_file->header.version); 1437 ret = -EINVAL; 1438 goto out_release; 1439 } 1440 1441 memcpy(conf, &conf_file->core, sizeof(*conf)); 1442 memcpy(priv_conf, &conf_file->priv, sizeof(*priv_conf)); 1443 1444 out_release: 1445 release_firmware(fw); 1446 return ret; 1447 } 1448 1449 static int wl18xx_conf_init(struct wl1271 *wl, struct device *dev) 1450 { 1451 struct wl18xx_priv *priv = wl->priv; 1452 1453 if (wl18xx_load_conf_file(dev, &wl->conf, &priv->conf) < 0) { 1454 wl1271_warning("falling back to default config"); 1455 1456 /* apply driver default configuration */ 1457 memcpy(&wl->conf, &wl18xx_conf, sizeof(wl->conf)); 1458 /* apply default private configuration */ 1459 memcpy(&priv->conf, &wl18xx_default_priv_conf, 1460 sizeof(priv->conf)); 1461 } 1462 1463 return 0; 1464 } 1465 1466 static int wl18xx_plt_init(struct wl1271 *wl) 1467 { 1468 int ret; 1469 1470 /* calibrator based auto/fem detect not supported for 18xx */ 1471 if (wl->plt_mode == PLT_FEM_DETECT) { 1472 wl1271_error("wl18xx_plt_init: PLT FEM_DETECT not supported"); 1473 return -EINVAL; 1474 } 1475 1476 ret = wlcore_write32(wl, WL18XX_SCR_PAD8, WL18XX_SCR_PAD8_PLT); 1477 if (ret < 0) 1478 return ret; 1479 1480 return wl->ops->boot(wl); 1481 } 1482 1483 static int wl18xx_get_mac(struct wl1271 *wl) 1484 { 1485 u32 mac1, mac2; 1486 int ret; 1487 1488 ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); 1489 if (ret < 0) 1490 goto out; 1491 1492 ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_1, &mac1); 1493 if (ret < 0) 1494 goto out; 1495 1496 ret = wlcore_read32(wl, WL18XX_REG_FUSE_BD_ADDR_2, &mac2); 1497 if (ret < 0) 1498 goto out; 1499 1500 /* these are the two parts of the BD_ADDR */ 1501 wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) + 1502 ((mac1 & 0xff000000) >> 24); 1503 wl->fuse_nic_addr = (mac1 & 0xffffff); 1504 1505 if (!wl->fuse_oui_addr && !wl->fuse_nic_addr) { 1506 u8 mac[ETH_ALEN]; 1507 1508 eth_random_addr(mac); 1509 1510 wl->fuse_oui_addr = (mac[0] << 16) + (mac[1] << 8) + mac[2]; 1511 wl->fuse_nic_addr = (mac[3] << 16) + (mac[4] << 8) + mac[5]; 1512 wl1271_warning("MAC address from fuse not available, using random locally administered addresses."); 1513 } 1514 1515 ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]); 1516 1517 out: 1518 return ret; 1519 } 1520 1521 static int wl18xx_handle_static_data(struct wl1271 *wl, 1522 struct wl1271_static_data *static_data) 1523 { 1524 struct wl18xx_static_data_priv *static_data_priv = 1525 (struct wl18xx_static_data_priv *) static_data->priv; 1526 1527 strncpy(wl->chip.phy_fw_ver_str, static_data_priv->phy_version, 1528 sizeof(wl->chip.phy_fw_ver_str)); 1529 1530 /* make sure the string is NULL-terminated */ 1531 wl->chip.phy_fw_ver_str[sizeof(wl->chip.phy_fw_ver_str) - 1] = '\0'; 1532 1533 wl1271_info("PHY firmware version: %s", static_data_priv->phy_version); 1534 1535 return 0; 1536 } 1537 1538 static int wl18xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) 1539 { 1540 struct wl18xx_priv *priv = wl->priv; 1541 1542 /* If we have keys requiring extra spare, indulge them */ 1543 if (priv->extra_spare_key_count) 1544 return WL18XX_TX_HW_EXTRA_BLOCK_SPARE; 1545 1546 return WL18XX_TX_HW_BLOCK_SPARE; 1547 } 1548 1549 static int wl18xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, 1550 struct ieee80211_vif *vif, 1551 struct ieee80211_sta *sta, 1552 struct ieee80211_key_conf *key_conf) 1553 { 1554 struct wl18xx_priv *priv = wl->priv; 1555 bool change_spare = false, special_enc; 1556 int ret; 1557 1558 wl1271_debug(DEBUG_CRYPT, "extra spare keys before: %d", 1559 priv->extra_spare_key_count); 1560 1561 special_enc = key_conf->cipher == WL1271_CIPHER_SUITE_GEM || 1562 key_conf->cipher == WLAN_CIPHER_SUITE_TKIP; 1563 1564 ret = wlcore_set_key(wl, cmd, vif, sta, key_conf); 1565 if (ret < 0) 1566 goto out; 1567 1568 /* 1569 * when adding the first or removing the last GEM/TKIP key, 1570 * we have to adjust the number of spare blocks. 1571 */ 1572 if (special_enc) { 1573 if (cmd == SET_KEY) { 1574 /* first key */ 1575 change_spare = (priv->extra_spare_key_count == 0); 1576 priv->extra_spare_key_count++; 1577 } else if (cmd == DISABLE_KEY) { 1578 /* last key */ 1579 change_spare = (priv->extra_spare_key_count == 1); 1580 priv->extra_spare_key_count--; 1581 } 1582 } 1583 1584 wl1271_debug(DEBUG_CRYPT, "extra spare keys after: %d", 1585 priv->extra_spare_key_count); 1586 1587 if (!change_spare) 1588 goto out; 1589 1590 /* key is now set, change the spare blocks */ 1591 if (priv->extra_spare_key_count) 1592 ret = wl18xx_set_host_cfg_bitmap(wl, 1593 WL18XX_TX_HW_EXTRA_BLOCK_SPARE); 1594 else 1595 ret = wl18xx_set_host_cfg_bitmap(wl, 1596 WL18XX_TX_HW_BLOCK_SPARE); 1597 1598 out: 1599 return ret; 1600 } 1601 1602 static u32 wl18xx_pre_pkt_send(struct wl1271 *wl, 1603 u32 buf_offset, u32 last_len) 1604 { 1605 if (wl->quirks & WLCORE_QUIRK_TX_PAD_LAST_FRAME) { 1606 struct wl1271_tx_hw_descr *last_desc; 1607 1608 /* get the last TX HW descriptor written to the aggr buf */ 1609 last_desc = (struct wl1271_tx_hw_descr *)(wl->aggr_buf + 1610 buf_offset - last_len); 1611 1612 /* the last frame is padded up to an SDIO block */ 1613 last_desc->wl18xx_mem.ctrl &= ~WL18XX_TX_CTRL_NOT_PADDED; 1614 return ALIGN(buf_offset, WL12XX_BUS_BLOCK_SIZE); 1615 } 1616 1617 /* no modifications */ 1618 return buf_offset; 1619 } 1620 1621 static void wl18xx_sta_rc_update(struct wl1271 *wl, 1622 struct wl12xx_vif *wlvif) 1623 { 1624 bool wide = wlvif->rc_update_bw >= IEEE80211_STA_RX_BW_40; 1625 1626 wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); 1627 1628 /* sanity */ 1629 if (WARN_ON(wlvif->bss_type != BSS_TYPE_STA_BSS)) 1630 return; 1631 1632 /* ignore the change before association */ 1633 if (!test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) 1634 return; 1635 1636 /* 1637 * If we started out as wide, we can change the operation mode. If we 1638 * thought this was a 20mhz AP, we have to reconnect 1639 */ 1640 if (wlvif->sta.role_chan_type == NL80211_CHAN_HT40MINUS || 1641 wlvif->sta.role_chan_type == NL80211_CHAN_HT40PLUS) 1642 wl18xx_acx_peer_ht_operation_mode(wl, wlvif->sta.hlid, wide); 1643 else 1644 ieee80211_connection_loss(wl12xx_wlvif_to_vif(wlvif)); 1645 } 1646 1647 static int wl18xx_set_peer_cap(struct wl1271 *wl, 1648 struct ieee80211_sta_ht_cap *ht_cap, 1649 bool allow_ht_operation, 1650 u32 rate_set, u8 hlid) 1651 { 1652 return wl18xx_acx_set_peer_cap(wl, ht_cap, allow_ht_operation, 1653 rate_set, hlid); 1654 } 1655 1656 static bool wl18xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, 1657 struct wl1271_link *lnk) 1658 { 1659 u8 thold; 1660 struct wl18xx_fw_status_priv *status_priv = 1661 (struct wl18xx_fw_status_priv *)wl->fw_status->priv; 1662 unsigned long suspend_bitmap; 1663 1664 /* if we don't have the link map yet, assume they all low prio */ 1665 if (!status_priv) 1666 return false; 1667 1668 /* suspended links are never high priority */ 1669 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); 1670 if (test_bit(hlid, &suspend_bitmap)) 1671 return false; 1672 1673 /* the priority thresholds are taken from FW */ 1674 if (test_bit(hlid, &wl->fw_fast_lnk_map) && 1675 !test_bit(hlid, &wl->ap_fw_ps_map)) 1676 thold = status_priv->tx_fast_link_prio_threshold; 1677 else 1678 thold = status_priv->tx_slow_link_prio_threshold; 1679 1680 return lnk->allocated_pkts < thold; 1681 } 1682 1683 static bool wl18xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, 1684 struct wl1271_link *lnk) 1685 { 1686 u8 thold; 1687 struct wl18xx_fw_status_priv *status_priv = 1688 (struct wl18xx_fw_status_priv *)wl->fw_status->priv; 1689 unsigned long suspend_bitmap; 1690 1691 /* if we don't have the link map yet, assume they all low prio */ 1692 if (!status_priv) 1693 return true; 1694 1695 suspend_bitmap = le32_to_cpu(status_priv->link_suspend_bitmap); 1696 if (test_bit(hlid, &suspend_bitmap)) 1697 thold = status_priv->tx_suspend_threshold; 1698 else if (test_bit(hlid, &wl->fw_fast_lnk_map) && 1699 !test_bit(hlid, &wl->ap_fw_ps_map)) 1700 thold = status_priv->tx_fast_stop_threshold; 1701 else 1702 thold = status_priv->tx_slow_stop_threshold; 1703 1704 return lnk->allocated_pkts < thold; 1705 } 1706 1707 static u32 wl18xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr) 1708 { 1709 return hwaddr & ~0x80000000; 1710 } 1711 1712 static int wl18xx_setup(struct wl1271 *wl); 1713 1714 static struct wlcore_ops wl18xx_ops = { 1715 .setup = wl18xx_setup, 1716 .identify_chip = wl18xx_identify_chip, 1717 .boot = wl18xx_boot, 1718 .plt_init = wl18xx_plt_init, 1719 .trigger_cmd = wl18xx_trigger_cmd, 1720 .ack_event = wl18xx_ack_event, 1721 .wait_for_event = wl18xx_wait_for_event, 1722 .process_mailbox_events = wl18xx_process_mailbox_events, 1723 .calc_tx_blocks = wl18xx_calc_tx_blocks, 1724 .set_tx_desc_blocks = wl18xx_set_tx_desc_blocks, 1725 .set_tx_desc_data_len = wl18xx_set_tx_desc_data_len, 1726 .get_rx_buf_align = wl18xx_get_rx_buf_align, 1727 .get_rx_packet_len = wl18xx_get_rx_packet_len, 1728 .tx_immediate_compl = wl18xx_tx_immediate_completion, 1729 .tx_delayed_compl = NULL, 1730 .hw_init = wl18xx_hw_init, 1731 .convert_fw_status = wl18xx_convert_fw_status, 1732 .set_tx_desc_csum = wl18xx_set_tx_desc_csum, 1733 .get_pg_ver = wl18xx_get_pg_ver, 1734 .set_rx_csum = wl18xx_set_rx_csum, 1735 .sta_get_ap_rate_mask = wl18xx_sta_get_ap_rate_mask, 1736 .ap_get_mimo_wide_rate_mask = wl18xx_ap_get_mimo_wide_rate_mask, 1737 .get_mac = wl18xx_get_mac, 1738 .debugfs_init = wl18xx_debugfs_add_files, 1739 .scan_start = wl18xx_scan_start, 1740 .scan_stop = wl18xx_scan_stop, 1741 .sched_scan_start = wl18xx_sched_scan_start, 1742 .sched_scan_stop = wl18xx_scan_sched_scan_stop, 1743 .handle_static_data = wl18xx_handle_static_data, 1744 .get_spare_blocks = wl18xx_get_spare_blocks, 1745 .set_key = wl18xx_set_key, 1746 .channel_switch = wl18xx_cmd_channel_switch, 1747 .pre_pkt_send = wl18xx_pre_pkt_send, 1748 .sta_rc_update = wl18xx_sta_rc_update, 1749 .set_peer_cap = wl18xx_set_peer_cap, 1750 .convert_hwaddr = wl18xx_convert_hwaddr, 1751 .lnk_high_prio = wl18xx_lnk_high_prio, 1752 .lnk_low_prio = wl18xx_lnk_low_prio, 1753 .smart_config_start = wl18xx_cmd_smart_config_start, 1754 .smart_config_stop = wl18xx_cmd_smart_config_stop, 1755 .smart_config_set_group_key = wl18xx_cmd_smart_config_set_group_key, 1756 .interrupt_notify = wl18xx_acx_interrupt_notify_config, 1757 .rx_ba_filter = wl18xx_acx_rx_ba_filter, 1758 .ap_sleep = wl18xx_acx_ap_sleep, 1759 .set_cac = wl18xx_cmd_set_cac, 1760 .dfs_master_restart = wl18xx_cmd_dfs_master_restart, 1761 }; 1762 1763 /* HT cap appropriate for wide channels in 2Ghz */ 1764 static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_2ghz = { 1765 .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | 1766 IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40 | 1767 IEEE80211_HT_CAP_GRN_FLD, 1768 .ht_supported = true, 1769 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, 1770 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, 1771 .mcs = { 1772 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, 1773 .rx_highest = cpu_to_le16(150), 1774 .tx_params = IEEE80211_HT_MCS_TX_DEFINED, 1775 }, 1776 }; 1777 1778 /* HT cap appropriate for wide channels in 5Ghz */ 1779 static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap_5ghz = { 1780 .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | 1781 IEEE80211_HT_CAP_SUP_WIDTH_20_40 | 1782 IEEE80211_HT_CAP_GRN_FLD, 1783 .ht_supported = true, 1784 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, 1785 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, 1786 .mcs = { 1787 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, 1788 .rx_highest = cpu_to_le16(150), 1789 .tx_params = IEEE80211_HT_MCS_TX_DEFINED, 1790 }, 1791 }; 1792 1793 /* HT cap appropriate for SISO 20 */ 1794 static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { 1795 .cap = IEEE80211_HT_CAP_SGI_20 | 1796 IEEE80211_HT_CAP_GRN_FLD, 1797 .ht_supported = true, 1798 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, 1799 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, 1800 .mcs = { 1801 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, 1802 .rx_highest = cpu_to_le16(72), 1803 .tx_params = IEEE80211_HT_MCS_TX_DEFINED, 1804 }, 1805 }; 1806 1807 /* HT cap appropriate for MIMO rates in 20mhz channel */ 1808 static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap_2ghz = { 1809 .cap = IEEE80211_HT_CAP_SGI_20 | 1810 IEEE80211_HT_CAP_GRN_FLD, 1811 .ht_supported = true, 1812 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, 1813 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, 1814 .mcs = { 1815 .rx_mask = { 0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0, }, 1816 .rx_highest = cpu_to_le16(144), 1817 .tx_params = IEEE80211_HT_MCS_TX_DEFINED, 1818 }, 1819 }; 1820 1821 static const struct ieee80211_iface_limit wl18xx_iface_limits[] = { 1822 { 1823 .max = 2, 1824 .types = BIT(NL80211_IFTYPE_STATION), 1825 }, 1826 { 1827 .max = 1, 1828 .types = BIT(NL80211_IFTYPE_AP) 1829 | BIT(NL80211_IFTYPE_P2P_GO) 1830 | BIT(NL80211_IFTYPE_P2P_CLIENT) 1831 #ifdef CONFIG_MAC80211_MESH 1832 | BIT(NL80211_IFTYPE_MESH_POINT) 1833 #endif 1834 }, 1835 { 1836 .max = 1, 1837 .types = BIT(NL80211_IFTYPE_P2P_DEVICE), 1838 }, 1839 }; 1840 1841 static const struct ieee80211_iface_limit wl18xx_iface_ap_limits[] = { 1842 { 1843 .max = 2, 1844 .types = BIT(NL80211_IFTYPE_AP), 1845 }, 1846 #ifdef CONFIG_MAC80211_MESH 1847 { 1848 .max = 1, 1849 .types = BIT(NL80211_IFTYPE_MESH_POINT), 1850 }, 1851 #endif 1852 { 1853 .max = 1, 1854 .types = BIT(NL80211_IFTYPE_P2P_DEVICE), 1855 }, 1856 }; 1857 1858 static const struct ieee80211_iface_limit wl18xx_iface_ap_cl_limits[] = { 1859 { 1860 .max = 1, 1861 .types = BIT(NL80211_IFTYPE_STATION), 1862 }, 1863 { 1864 .max = 1, 1865 .types = BIT(NL80211_IFTYPE_AP), 1866 }, 1867 { 1868 .max = 1, 1869 .types = BIT(NL80211_IFTYPE_P2P_CLIENT), 1870 }, 1871 { 1872 .max = 1, 1873 .types = BIT(NL80211_IFTYPE_P2P_DEVICE), 1874 }, 1875 }; 1876 1877 static const struct ieee80211_iface_limit wl18xx_iface_ap_go_limits[] = { 1878 { 1879 .max = 1, 1880 .types = BIT(NL80211_IFTYPE_STATION), 1881 }, 1882 { 1883 .max = 1, 1884 .types = BIT(NL80211_IFTYPE_AP), 1885 }, 1886 { 1887 .max = 1, 1888 .types = BIT(NL80211_IFTYPE_P2P_GO), 1889 }, 1890 { 1891 .max = 1, 1892 .types = BIT(NL80211_IFTYPE_P2P_DEVICE), 1893 }, 1894 }; 1895 1896 static const struct ieee80211_iface_combination 1897 wl18xx_iface_combinations[] = { 1898 { 1899 .max_interfaces = 3, 1900 .limits = wl18xx_iface_limits, 1901 .n_limits = ARRAY_SIZE(wl18xx_iface_limits), 1902 .num_different_channels = 2, 1903 }, 1904 { 1905 .max_interfaces = 2, 1906 .limits = wl18xx_iface_ap_limits, 1907 .n_limits = ARRAY_SIZE(wl18xx_iface_ap_limits), 1908 .num_different_channels = 1, 1909 .radar_detect_widths = BIT(NL80211_CHAN_NO_HT) | 1910 BIT(NL80211_CHAN_HT20) | 1911 BIT(NL80211_CHAN_HT40MINUS) | 1912 BIT(NL80211_CHAN_HT40PLUS), 1913 } 1914 }; 1915 1916 static int wl18xx_setup(struct wl1271 *wl) 1917 { 1918 struct wl18xx_priv *priv = wl->priv; 1919 int ret; 1920 1921 BUILD_BUG_ON(WL18XX_MAX_LINKS > WLCORE_MAX_LINKS); 1922 BUILD_BUG_ON(WL18XX_MAX_AP_STATIONS > WL18XX_MAX_LINKS); 1923 BUILD_BUG_ON(WL18XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX); 1924 1925 wl->rtable = wl18xx_rtable; 1926 wl->num_tx_desc = WL18XX_NUM_TX_DESCRIPTORS; 1927 wl->num_rx_desc = WL18XX_NUM_RX_DESCRIPTORS; 1928 wl->num_links = WL18XX_MAX_LINKS; 1929 wl->max_ap_stations = WL18XX_MAX_AP_STATIONS; 1930 wl->iface_combinations = wl18xx_iface_combinations; 1931 wl->n_iface_combinations = ARRAY_SIZE(wl18xx_iface_combinations); 1932 wl->num_mac_addr = WL18XX_NUM_MAC_ADDRESSES; 1933 wl->band_rate_to_idx = wl18xx_band_rate_to_idx; 1934 wl->hw_tx_rate_tbl_size = WL18XX_CONF_HW_RXTX_RATE_MAX; 1935 wl->hw_min_ht_rate = WL18XX_CONF_HW_RXTX_RATE_MCS0; 1936 wl->fw_status_len = sizeof(struct wl18xx_fw_status); 1937 wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv); 1938 wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics); 1939 wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv); 1940 1941 if (num_rx_desc_param != -1) 1942 wl->num_rx_desc = num_rx_desc_param; 1943 1944 ret = wl18xx_conf_init(wl, wl->dev); 1945 if (ret < 0) 1946 return ret; 1947 1948 /* If the module param is set, update it in conf */ 1949 if (board_type_param) { 1950 if (!strcmp(board_type_param, "fpga")) { 1951 priv->conf.phy.board_type = BOARD_TYPE_FPGA_18XX; 1952 } else if (!strcmp(board_type_param, "hdk")) { 1953 priv->conf.phy.board_type = BOARD_TYPE_HDK_18XX; 1954 } else if (!strcmp(board_type_param, "dvp")) { 1955 priv->conf.phy.board_type = BOARD_TYPE_DVP_18XX; 1956 } else if (!strcmp(board_type_param, "evb")) { 1957 priv->conf.phy.board_type = BOARD_TYPE_EVB_18XX; 1958 } else if (!strcmp(board_type_param, "com8")) { 1959 priv->conf.phy.board_type = BOARD_TYPE_COM8_18XX; 1960 } else { 1961 wl1271_error("invalid board type '%s'", 1962 board_type_param); 1963 return -EINVAL; 1964 } 1965 } 1966 1967 if (priv->conf.phy.board_type >= NUM_BOARD_TYPES) { 1968 wl1271_error("invalid board type '%d'", 1969 priv->conf.phy.board_type); 1970 return -EINVAL; 1971 } 1972 1973 if (low_band_component_param != -1) 1974 priv->conf.phy.low_band_component = low_band_component_param; 1975 if (low_band_component_type_param != -1) 1976 priv->conf.phy.low_band_component_type = 1977 low_band_component_type_param; 1978 if (high_band_component_param != -1) 1979 priv->conf.phy.high_band_component = high_band_component_param; 1980 if (high_band_component_type_param != -1) 1981 priv->conf.phy.high_band_component_type = 1982 high_band_component_type_param; 1983 if (pwr_limit_reference_11_abg_param != -1) 1984 priv->conf.phy.pwr_limit_reference_11_abg = 1985 pwr_limit_reference_11_abg_param; 1986 if (n_antennas_2_param != -1) 1987 priv->conf.phy.number_of_assembled_ant2_4 = n_antennas_2_param; 1988 if (n_antennas_5_param != -1) 1989 priv->conf.phy.number_of_assembled_ant5 = n_antennas_5_param; 1990 if (dc2dc_param != -1) 1991 priv->conf.phy.external_pa_dc2dc = dc2dc_param; 1992 1993 if (ht_mode_param) { 1994 if (!strcmp(ht_mode_param, "default")) 1995 priv->conf.ht.mode = HT_MODE_DEFAULT; 1996 else if (!strcmp(ht_mode_param, "wide")) 1997 priv->conf.ht.mode = HT_MODE_WIDE; 1998 else if (!strcmp(ht_mode_param, "siso20")) 1999 priv->conf.ht.mode = HT_MODE_SISO20; 2000 else { 2001 wl1271_error("invalid ht_mode '%s'", ht_mode_param); 2002 return -EINVAL; 2003 } 2004 } 2005 2006 if (priv->conf.ht.mode == HT_MODE_DEFAULT) { 2007 /* 2008 * Only support mimo with multiple antennas. Fall back to 2009 * siso40. 2010 */ 2011 if (wl18xx_is_mimo_supported(wl)) 2012 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, 2013 &wl18xx_mimo_ht_cap_2ghz); 2014 else 2015 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, 2016 &wl18xx_siso40_ht_cap_2ghz); 2017 2018 /* 5Ghz is always wide */ 2019 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, 2020 &wl18xx_siso40_ht_cap_5ghz); 2021 } else if (priv->conf.ht.mode == HT_MODE_WIDE) { 2022 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, 2023 &wl18xx_siso40_ht_cap_2ghz); 2024 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, 2025 &wl18xx_siso40_ht_cap_5ghz); 2026 } else if (priv->conf.ht.mode == HT_MODE_SISO20) { 2027 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, 2028 &wl18xx_siso20_ht_cap); 2029 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, 2030 &wl18xx_siso20_ht_cap); 2031 } 2032 2033 if (!checksum_param) { 2034 wl18xx_ops.set_rx_csum = NULL; 2035 wl18xx_ops.init_vif = NULL; 2036 } 2037 2038 /* Enable 11a Band only if we have 5G antennas */ 2039 wl->enable_11a = (priv->conf.phy.number_of_assembled_ant5 != 0); 2040 2041 return 0; 2042 } 2043 2044 static int wl18xx_probe(struct platform_device *pdev) 2045 { 2046 struct wl1271 *wl; 2047 struct ieee80211_hw *hw; 2048 int ret; 2049 2050 hw = wlcore_alloc_hw(sizeof(struct wl18xx_priv), 2051 WL18XX_AGGR_BUFFER_SIZE, 2052 sizeof(struct wl18xx_event_mailbox)); 2053 if (IS_ERR(hw)) { 2054 wl1271_error("can't allocate hw"); 2055 ret = PTR_ERR(hw); 2056 goto out; 2057 } 2058 2059 wl = hw->priv; 2060 wl->ops = &wl18xx_ops; 2061 wl->ptable = wl18xx_ptable; 2062 ret = wlcore_probe(wl, pdev); 2063 if (ret) 2064 goto out_free; 2065 2066 return ret; 2067 2068 out_free: 2069 wlcore_free_hw(wl); 2070 out: 2071 return ret; 2072 } 2073 2074 static const struct platform_device_id wl18xx_id_table[] = { 2075 { "wl18xx", 0 }, 2076 { } /* Terminating Entry */ 2077 }; 2078 MODULE_DEVICE_TABLE(platform, wl18xx_id_table); 2079 2080 static struct platform_driver wl18xx_driver = { 2081 .probe = wl18xx_probe, 2082 .remove = wlcore_remove, 2083 .id_table = wl18xx_id_table, 2084 .driver = { 2085 .name = "wl18xx_driver", 2086 } 2087 }; 2088 2089 module_platform_driver(wl18xx_driver); 2090 module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); 2091 MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or siso20"); 2092 2093 module_param_named(board_type, board_type_param, charp, S_IRUSR); 2094 MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or " 2095 "dvp"); 2096 2097 module_param_named(checksum, checksum_param, bool, S_IRUSR); 2098 MODULE_PARM_DESC(checksum, "Enable TCP checksum: boolean (defaults to false)"); 2099 2100 module_param_named(dc2dc, dc2dc_param, int, S_IRUSR); 2101 MODULE_PARM_DESC(dc2dc, "External DC2DC: u8 (defaults to 0)"); 2102 2103 module_param_named(n_antennas_2, n_antennas_2_param, int, S_IRUSR); 2104 MODULE_PARM_DESC(n_antennas_2, 2105 "Number of installed 2.4GHz antennas: 1 (default) or 2"); 2106 2107 module_param_named(n_antennas_5, n_antennas_5_param, int, S_IRUSR); 2108 MODULE_PARM_DESC(n_antennas_5, 2109 "Number of installed 5GHz antennas: 1 (default) or 2"); 2110 2111 module_param_named(low_band_component, low_band_component_param, int, 2112 S_IRUSR); 2113 MODULE_PARM_DESC(low_band_component, "Low band component: u8 " 2114 "(default is 0x01)"); 2115 2116 module_param_named(low_band_component_type, low_band_component_type_param, 2117 int, S_IRUSR); 2118 MODULE_PARM_DESC(low_band_component_type, "Low band component type: u8 " 2119 "(default is 0x05 or 0x06 depending on the board_type)"); 2120 2121 module_param_named(high_band_component, high_band_component_param, int, 2122 S_IRUSR); 2123 MODULE_PARM_DESC(high_band_component, "High band component: u8, " 2124 "(default is 0x01)"); 2125 2126 module_param_named(high_band_component_type, high_band_component_type_param, 2127 int, S_IRUSR); 2128 MODULE_PARM_DESC(high_band_component_type, "High band component type: u8 " 2129 "(default is 0x09)"); 2130 2131 module_param_named(pwr_limit_reference_11_abg, 2132 pwr_limit_reference_11_abg_param, int, S_IRUSR); 2133 MODULE_PARM_DESC(pwr_limit_reference_11_abg, "Power limit reference: u8 " 2134 "(default is 0xc8)"); 2135 2136 module_param_named(num_rx_desc, 2137 num_rx_desc_param, int, S_IRUSR); 2138 MODULE_PARM_DESC(num_rx_desc_param, 2139 "Number of Rx descriptors: u8 (default is 32)"); 2140 2141 MODULE_LICENSE("GPL v2"); 2142 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); 2143 MODULE_FIRMWARE(WL18XX_FW_NAME); 2144 MODULE_FIRMWARE(WL18XX_CONF_FILE_NAME); 2145