xref: /openbmc/linux/drivers/net/wireless/ti/wl18xx/conf.h (revision 0edbfea5)
1 /*
2  * This file is part of wl18xx
3  *
4  * Copyright (C) 2011 Texas Instruments Inc.
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * version 2 as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope that it will be useful, but
11  * WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
13  * General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
18  * 02110-1301 USA
19  *
20  */
21 
22 #ifndef __WL18XX_CONF_H__
23 #define __WL18XX_CONF_H__
24 
25 #define WL18XX_CONF_MAGIC	0x10e100ca
26 #define WL18XX_CONF_VERSION	(WLCORE_CONF_VERSION | 0x0007)
27 #define WL18XX_CONF_MASK	0x0000ffff
28 #define WL18XX_CONF_SIZE	(WLCORE_CONF_SIZE + \
29 				 sizeof(struct wl18xx_priv_conf))
30 
31 #define NUM_OF_CHANNELS_11_ABG 150
32 #define NUM_OF_CHANNELS_11_P 7
33 #define SRF_TABLE_LEN 16
34 #define PIN_MUXING_SIZE 2
35 #define WL18XX_TRACE_LOSS_GAPS_TX 10
36 #define WL18XX_TRACE_LOSS_GAPS_RX 18
37 
38 struct wl18xx_mac_and_phy_params {
39 	u8 phy_standalone;
40 	u8 spare0;
41 	u8 enable_clpc;
42 	u8 enable_tx_low_pwr_on_siso_rdl;
43 	u8 auto_detect;
44 	u8 dedicated_fem;
45 
46 	u8 low_band_component;
47 
48 	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
49 	u8 low_band_component_type;
50 
51 	u8 high_band_component;
52 
53 	/* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
54 	u8 high_band_component_type;
55 	u8 number_of_assembled_ant2_4;
56 	u8 number_of_assembled_ant5;
57 	u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
58 	u8 external_pa_dc2dc;
59 	u8 tcxo_ldo_voltage;
60 	u8 xtal_itrim_val;
61 	u8 srf_state;
62 	u8 srf1[SRF_TABLE_LEN];
63 	u8 srf2[SRF_TABLE_LEN];
64 	u8 srf3[SRF_TABLE_LEN];
65 	u8 io_configuration;
66 	u8 sdio_configuration;
67 	u8 settings;
68 	u8 rx_profile;
69 	u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
70 	u8 pwr_limit_reference_11_abg;
71 	u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
72 	u8 pwr_limit_reference_11p;
73 	u8 spare1;
74 	u8 per_chan_bo_mode_11_abg[13];
75 	u8 per_chan_bo_mode_11_p[4];
76 	u8 primary_clock_setting_time;
77 	u8 clock_valid_on_wake_up;
78 	u8 secondary_clock_setting_time;
79 	u8 board_type;
80 	/* enable point saturation */
81 	u8 psat;
82 	/* low/medium/high Tx power in dBm for STA-HP BG */
83 	s8 low_power_val;
84 	s8 med_power_val;
85 	s8 high_power_val;
86 	s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
87 	s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
88 	u8 tx_rf_margin;
89 	/* low/medium/high Tx power in dBm for other role */
90 	s8 low_power_val_2nd;
91 	s8 med_power_val_2nd;
92 	s8 high_power_val_2nd;
93 
94 	u8 padding[1];
95 } __packed;
96 
97 enum wl18xx_ht_mode {
98 	/* Default - use MIMO, fallback to SISO20 */
99 	HT_MODE_DEFAULT = 0,
100 
101 	/* Wide - use SISO40 */
102 	HT_MODE_WIDE = 1,
103 
104 	/* Use SISO20 */
105 	HT_MODE_SISO20 = 2,
106 };
107 
108 struct wl18xx_ht_settings {
109 	/* DEFAULT / WIDE / SISO20 */
110 	u8 mode;
111 } __packed;
112 
113 struct conf_ap_sleep_settings {
114 	/* Duty Cycle (20-80% of staying Awake) for IDLE AP
115 	 * (0: disable)
116 	 */
117 	u8 idle_duty_cycle;
118 	/* Duty Cycle (20-80% of staying Awake) for Connected AP
119 	 * (0: disable)
120 	 */
121 	u8 connected_duty_cycle;
122 	/* Maximum stations that are allowed to be connected to AP
123 	 *  (255: no limit)
124 	 */
125 	u8 max_stations_thresh;
126 	/* Timeout till enabling the Sleep Mechanism after data stops
127 	 * [unit: 100 msec]
128 	 */
129 	u8 idle_conn_thresh;
130 } __packed;
131 
132 struct wl18xx_priv_conf {
133 	/* Module params structures */
134 	struct wl18xx_ht_settings ht;
135 
136 	/* this structure is copied wholesale to FW */
137 	struct wl18xx_mac_and_phy_params phy;
138 
139 	struct conf_ap_sleep_settings ap_sleep;
140 } __packed;
141 
142 enum wl18xx_sg_params {
143 	WL18XX_CONF_SG_PARAM_0 = 0,
144 
145 	/* Configuration Parameters */
146 	WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
147 	WL18XX_CONF_SG_ZIGBEE_COEX,
148 	WL18XX_CONF_SG_TIME_SYNC,
149 
150 	WL18XX_CONF_SG_PARAM_4,
151 	WL18XX_CONF_SG_PARAM_5,
152 	WL18XX_CONF_SG_PARAM_6,
153 	WL18XX_CONF_SG_PARAM_7,
154 	WL18XX_CONF_SG_PARAM_8,
155 	WL18XX_CONF_SG_PARAM_9,
156 	WL18XX_CONF_SG_PARAM_10,
157 	WL18XX_CONF_SG_PARAM_11,
158 	WL18XX_CONF_SG_PARAM_12,
159 	WL18XX_CONF_SG_PARAM_13,
160 	WL18XX_CONF_SG_PARAM_14,
161 	WL18XX_CONF_SG_PARAM_15,
162 	WL18XX_CONF_SG_PARAM_16,
163 	WL18XX_CONF_SG_PARAM_17,
164 	WL18XX_CONF_SG_PARAM_18,
165 	WL18XX_CONF_SG_PARAM_19,
166 	WL18XX_CONF_SG_PARAM_20,
167 	WL18XX_CONF_SG_PARAM_21,
168 	WL18XX_CONF_SG_PARAM_22,
169 	WL18XX_CONF_SG_PARAM_23,
170 	WL18XX_CONF_SG_PARAM_24,
171 	WL18XX_CONF_SG_PARAM_25,
172 
173 	/* Active Scan Parameters */
174 	WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
175 	WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
176 
177 	WL18XX_CONF_SG_PARAM_28,
178 
179 	/* Passive Scan Parameters */
180 	WL18XX_CONF_SG_PARAM_29,
181 	WL18XX_CONF_SG_PARAM_30,
182 	WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
183 
184 	/* Passive Scan in Dual Antenna Parameters */
185 	WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
186 	WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
187 	WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
188 
189 	/* General Parameters */
190 	WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
191 	WL18XX_CONF_SG_PARAM_36,
192 	WL18XX_CONF_SG_BEACON_MISS_PERCENT,
193 	WL18XX_CONF_SG_PARAM_38,
194 	WL18XX_CONF_SG_RXT,
195 	WL18XX_CONF_SG_UNUSED,
196 	WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
197 	WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
198 	WL18XX_CONF_SG_HV3_MAX_SERVED,
199 	WL18XX_CONF_SG_PARAM_44,
200 	WL18XX_CONF_SG_PARAM_45,
201 	WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
202 	WL18XX_CONF_SG_GEMINI_PARAM_47,
203 	WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
204 
205 	/* AP Parameters */
206 	WL18XX_CONF_SG_AP_BEACON_MISS_TX,
207 	WL18XX_CONF_SG_PARAM_50,
208 	WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
209 	WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
210 	WL18XX_CONF_SG_PARAM_53,
211 	WL18XX_CONF_SG_PARAM_54,
212 
213 	/* CTS Diluting Parameters */
214 	WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
215 	WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
216 
217 	WL18XX_CONF_SG_TEMP_PARAM_1,
218 	WL18XX_CONF_SG_TEMP_PARAM_2,
219 	WL18XX_CONF_SG_TEMP_PARAM_3,
220 	WL18XX_CONF_SG_TEMP_PARAM_4,
221 	WL18XX_CONF_SG_TEMP_PARAM_5,
222 	WL18XX_CONF_SG_TEMP_PARAM_6,
223 	WL18XX_CONF_SG_TEMP_PARAM_7,
224 	WL18XX_CONF_SG_TEMP_PARAM_8,
225 	WL18XX_CONF_SG_TEMP_PARAM_9,
226 	WL18XX_CONF_SG_TEMP_PARAM_10,
227 
228 	WL18XX_CONF_SG_PARAMS_MAX,
229 	WL18XX_CONF_SG_PARAMS_ALL = 0xff
230 };
231 
232 #endif /* __WL18XX_CONF_H__ */
233