1 /* 2 * This file is part of wl1271 3 * 4 * Copyright (C) 2008-2010 Nokia Corporation 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License 8 * version 2 as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 13 * General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 18 * 02110-1301 USA 19 * 20 */ 21 22 #include <linux/module.h> 23 #include <linux/platform_device.h> 24 25 #include <linux/err.h> 26 27 #include "../wlcore/wlcore.h" 28 #include "../wlcore/debug.h" 29 #include "../wlcore/io.h" 30 #include "../wlcore/acx.h" 31 #include "../wlcore/tx.h" 32 #include "../wlcore/rx.h" 33 #include "../wlcore/boot.h" 34 35 #include "wl12xx.h" 36 #include "reg.h" 37 #include "cmd.h" 38 #include "acx.h" 39 #include "scan.h" 40 #include "event.h" 41 #include "debugfs.h" 42 #include "conf.h" 43 44 static char *fref_param; 45 static char *tcxo_param; 46 47 static struct wlcore_conf wl12xx_conf = { 48 .sg = { 49 .params = { 50 [WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR] = 10, 51 [WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR] = 180, 52 [WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10, 53 [WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180, 54 [WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10, 55 [WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80, 56 [WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10, 57 [WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80, 58 [WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8, 59 [WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8, 60 [WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20, 61 [WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20, 62 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20, 63 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35, 64 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16, 65 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35, 66 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32, 67 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50, 68 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28, 69 [WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50, 70 [WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10, 71 [WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20, 72 [WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75, 73 [WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15, 74 [WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27, 75 [WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17, 76 /* active scan params */ 77 [WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, 78 [WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, 79 [WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, 80 /* passive scan params */ 81 [WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR] = 800, 82 [WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR] = 200, 83 [WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3] = 200, 84 /* passive scan in dual antenna params */ 85 [WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0, 86 [WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN] = 0, 87 [WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN] = 0, 88 /* general params */ 89 [WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1, 90 [WL12XX_CONF_SG_ANTENNA_CONFIGURATION] = 0, 91 [WL12XX_CONF_SG_BEACON_MISS_PERCENT] = 60, 92 [WL12XX_CONF_SG_DHCP_TIME] = 5000, 93 [WL12XX_CONF_SG_RXT] = 1200, 94 [WL12XX_CONF_SG_TXT] = 1000, 95 [WL12XX_CONF_SG_ADAPTIVE_RXT_TXT] = 1, 96 [WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP] = 3, 97 [WL12XX_CONF_SG_HV3_MAX_SERVED] = 6, 98 [WL12XX_CONF_SG_PS_POLL_TIMEOUT] = 10, 99 [WL12XX_CONF_SG_UPSD_TIMEOUT] = 10, 100 [WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2, 101 [WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5, 102 [WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30, 103 /* AP params */ 104 [WL12XX_CONF_AP_BEACON_MISS_TX] = 3, 105 [WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON] = 10, 106 [WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL] = 2, 107 [WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME] = 0, 108 [WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25, 109 [WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25, 110 /* CTS Diluting params */ 111 [WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH] = 0, 112 [WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER] = 0, 113 }, 114 .state = CONF_SG_PROTECTIVE, 115 }, 116 .rx = { 117 .rx_msdu_life_time = 512000, 118 .packet_detection_threshold = 0, 119 .ps_poll_timeout = 15, 120 .upsd_timeout = 15, 121 .rts_threshold = IEEE80211_MAX_RTS_THRESHOLD, 122 .rx_cca_threshold = 0, 123 .irq_blk_threshold = 0xFFFF, 124 .irq_pkt_threshold = 0, 125 .irq_timeout = 600, 126 .queue_type = CONF_RX_QUEUE_TYPE_LOW_PRIORITY, 127 }, 128 .tx = { 129 .tx_energy_detection = 0, 130 .sta_rc_conf = { 131 .enabled_rates = 0, 132 .short_retry_limit = 10, 133 .long_retry_limit = 10, 134 .aflags = 0, 135 }, 136 .ac_conf_count = 4, 137 .ac_conf = { 138 [CONF_TX_AC_BE] = { 139 .ac = CONF_TX_AC_BE, 140 .cw_min = 15, 141 .cw_max = 63, 142 .aifsn = 3, 143 .tx_op_limit = 0, 144 }, 145 [CONF_TX_AC_BK] = { 146 .ac = CONF_TX_AC_BK, 147 .cw_min = 15, 148 .cw_max = 63, 149 .aifsn = 7, 150 .tx_op_limit = 0, 151 }, 152 [CONF_TX_AC_VI] = { 153 .ac = CONF_TX_AC_VI, 154 .cw_min = 15, 155 .cw_max = 63, 156 .aifsn = CONF_TX_AIFS_PIFS, 157 .tx_op_limit = 3008, 158 }, 159 [CONF_TX_AC_VO] = { 160 .ac = CONF_TX_AC_VO, 161 .cw_min = 15, 162 .cw_max = 63, 163 .aifsn = CONF_TX_AIFS_PIFS, 164 .tx_op_limit = 1504, 165 }, 166 }, 167 .max_tx_retries = 100, 168 .ap_aging_period = 300, 169 .tid_conf_count = 4, 170 .tid_conf = { 171 [CONF_TX_AC_BE] = { 172 .queue_id = CONF_TX_AC_BE, 173 .channel_type = CONF_CHANNEL_TYPE_EDCF, 174 .tsid = CONF_TX_AC_BE, 175 .ps_scheme = CONF_PS_SCHEME_LEGACY, 176 .ack_policy = CONF_ACK_POLICY_LEGACY, 177 .apsd_conf = {0, 0}, 178 }, 179 [CONF_TX_AC_BK] = { 180 .queue_id = CONF_TX_AC_BK, 181 .channel_type = CONF_CHANNEL_TYPE_EDCF, 182 .tsid = CONF_TX_AC_BK, 183 .ps_scheme = CONF_PS_SCHEME_LEGACY, 184 .ack_policy = CONF_ACK_POLICY_LEGACY, 185 .apsd_conf = {0, 0}, 186 }, 187 [CONF_TX_AC_VI] = { 188 .queue_id = CONF_TX_AC_VI, 189 .channel_type = CONF_CHANNEL_TYPE_EDCF, 190 .tsid = CONF_TX_AC_VI, 191 .ps_scheme = CONF_PS_SCHEME_LEGACY, 192 .ack_policy = CONF_ACK_POLICY_LEGACY, 193 .apsd_conf = {0, 0}, 194 }, 195 [CONF_TX_AC_VO] = { 196 .queue_id = CONF_TX_AC_VO, 197 .channel_type = CONF_CHANNEL_TYPE_EDCF, 198 .tsid = CONF_TX_AC_VO, 199 .ps_scheme = CONF_PS_SCHEME_LEGACY, 200 .ack_policy = CONF_ACK_POLICY_LEGACY, 201 .apsd_conf = {0, 0}, 202 }, 203 }, 204 .frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD, 205 .tx_compl_timeout = 700, 206 .tx_compl_threshold = 4, 207 .basic_rate = CONF_HW_BIT_RATE_1MBPS, 208 .basic_rate_5 = CONF_HW_BIT_RATE_6MBPS, 209 .tmpl_short_retry_limit = 10, 210 .tmpl_long_retry_limit = 10, 211 .tx_watchdog_timeout = 5000, 212 .slow_link_thold = 3, 213 .fast_link_thold = 10, 214 }, 215 .conn = { 216 .wake_up_event = CONF_WAKE_UP_EVENT_DTIM, 217 .listen_interval = 1, 218 .suspend_wake_up_event = CONF_WAKE_UP_EVENT_N_DTIM, 219 .suspend_listen_interval = 3, 220 .bcn_filt_mode = CONF_BCN_FILT_MODE_ENABLED, 221 .bcn_filt_ie_count = 3, 222 .bcn_filt_ie = { 223 [0] = { 224 .ie = WLAN_EID_CHANNEL_SWITCH, 225 .rule = CONF_BCN_RULE_PASS_ON_APPEARANCE, 226 }, 227 [1] = { 228 .ie = WLAN_EID_HT_OPERATION, 229 .rule = CONF_BCN_RULE_PASS_ON_CHANGE, 230 }, 231 [2] = { 232 .ie = WLAN_EID_ERP_INFO, 233 .rule = CONF_BCN_RULE_PASS_ON_CHANGE, 234 }, 235 }, 236 .synch_fail_thold = 12, 237 .bss_lose_timeout = 400, 238 .beacon_rx_timeout = 10000, 239 .broadcast_timeout = 20000, 240 .rx_broadcast_in_ps = 1, 241 .ps_poll_threshold = 10, 242 .bet_enable = CONF_BET_MODE_ENABLE, 243 .bet_max_consecutive = 50, 244 .psm_entry_retries = 8, 245 .psm_exit_retries = 16, 246 .psm_entry_nullfunc_retries = 3, 247 .dynamic_ps_timeout = 1500, 248 .forced_ps = false, 249 .keep_alive_interval = 55000, 250 .max_listen_interval = 20, 251 .sta_sleep_auth = WL1271_PSM_ILLEGAL, 252 .suspend_rx_ba_activity = 0, 253 }, 254 .itrim = { 255 .enable = false, 256 .timeout = 50000, 257 }, 258 .pm_config = { 259 .host_clk_settling_time = 5000, 260 .host_fast_wakeup_support = CONF_FAST_WAKEUP_DISABLE, 261 }, 262 .roam_trigger = { 263 .trigger_pacing = 1, 264 .avg_weight_rssi_beacon = 20, 265 .avg_weight_rssi_data = 10, 266 .avg_weight_snr_beacon = 20, 267 .avg_weight_snr_data = 10, 268 }, 269 .scan = { 270 .min_dwell_time_active = 7500, 271 .max_dwell_time_active = 30000, 272 .min_dwell_time_active_long = 25000, 273 .max_dwell_time_active_long = 50000, 274 .dwell_time_passive = 100000, 275 .dwell_time_dfs = 150000, 276 .num_probe_reqs = 2, 277 .split_scan_timeout = 50000, 278 }, 279 .sched_scan = { 280 /* 281 * Values are in TU/1000 but since sched scan FW command 282 * params are in TUs rounding up may occur. 283 */ 284 .base_dwell_time = 7500, 285 .max_dwell_time_delta = 22500, 286 /* based on 250bits per probe @1Mbps */ 287 .dwell_time_delta_per_probe = 2000, 288 /* based on 250bits per probe @6Mbps (plus a bit more) */ 289 .dwell_time_delta_per_probe_5 = 350, 290 .dwell_time_passive = 100000, 291 .dwell_time_dfs = 150000, 292 .num_probe_reqs = 2, 293 .rssi_threshold = -90, 294 .snr_threshold = 0, 295 }, 296 .ht = { 297 .rx_ba_win_size = 8, 298 .tx_ba_win_size = 64, 299 .inactivity_timeout = 10000, 300 .tx_ba_tid_bitmap = CONF_TX_BA_ENABLED_TID_BITMAP, 301 }, 302 /* 303 * Memory config for wl127x chips is given in the 304 * wl12xx_default_priv_conf struct. The below configuration is 305 * for wl128x chips. 306 */ 307 .mem = { 308 .num_stations = 1, 309 .ssid_profiles = 1, 310 .rx_block_num = 40, 311 .tx_min_block_num = 40, 312 .dynamic_memory = 1, 313 .min_req_tx_blocks = 45, 314 .min_req_rx_blocks = 22, 315 .tx_min = 27, 316 }, 317 .fm_coex = { 318 .enable = true, 319 .swallow_period = 5, 320 .n_divider_fref_set_1 = 0xff, /* default */ 321 .n_divider_fref_set_2 = 12, 322 .m_divider_fref_set_1 = 0xffff, 323 .m_divider_fref_set_2 = 148, /* default */ 324 .coex_pll_stabilization_time = 0xffffffff, /* default */ 325 .ldo_stabilization_time = 0xffff, /* default */ 326 .fm_disturbed_band_margin = 0xff, /* default */ 327 .swallow_clk_diff = 0xff, /* default */ 328 }, 329 .rx_streaming = { 330 .duration = 150, 331 .queues = 0x1, 332 .interval = 20, 333 .always = 0, 334 }, 335 .fwlog = { 336 .mode = WL12XX_FWLOG_CONTINUOUS, 337 .mem_blocks = 2, 338 .severity = 0, 339 .timestamp = WL12XX_FWLOG_TIMESTAMP_DISABLED, 340 .output = WL12XX_FWLOG_OUTPUT_DBG_PINS, 341 .threshold = 0, 342 }, 343 .rate = { 344 .rate_retry_score = 32000, 345 .per_add = 8192, 346 .per_th1 = 2048, 347 .per_th2 = 4096, 348 .max_per = 8100, 349 .inverse_curiosity_factor = 5, 350 .tx_fail_low_th = 4, 351 .tx_fail_high_th = 10, 352 .per_alpha_shift = 4, 353 .per_add_shift = 13, 354 .per_beta1_shift = 10, 355 .per_beta2_shift = 8, 356 .rate_check_up = 2, 357 .rate_check_down = 12, 358 .rate_retry_policy = { 359 0x00, 0x00, 0x00, 0x00, 0x00, 360 0x00, 0x00, 0x00, 0x00, 0x00, 361 0x00, 0x00, 0x00, 362 }, 363 }, 364 .hangover = { 365 .recover_time = 0, 366 .hangover_period = 20, 367 .dynamic_mode = 1, 368 .early_termination_mode = 1, 369 .max_period = 20, 370 .min_period = 1, 371 .increase_delta = 1, 372 .decrease_delta = 2, 373 .quiet_time = 4, 374 .increase_time = 1, 375 .window_size = 16, 376 }, 377 .recovery = { 378 .bug_on_recovery = 0, 379 .no_recovery = 0, 380 }, 381 }; 382 383 static struct wl12xx_priv_conf wl12xx_default_priv_conf = { 384 .rf = { 385 .tx_per_channel_power_compensation_2 = { 386 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 387 }, 388 .tx_per_channel_power_compensation_5 = { 389 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 390 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 391 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 392 }, 393 }, 394 .mem_wl127x = { 395 .num_stations = 1, 396 .ssid_profiles = 1, 397 .rx_block_num = 70, 398 .tx_min_block_num = 40, 399 .dynamic_memory = 1, 400 .min_req_tx_blocks = 100, 401 .min_req_rx_blocks = 22, 402 .tx_min = 27, 403 }, 404 405 }; 406 407 #define WL12XX_TX_HW_BLOCK_SPARE_DEFAULT 1 408 #define WL12XX_TX_HW_BLOCK_GEM_SPARE 2 409 #define WL12XX_TX_HW_BLOCK_SIZE 252 410 411 static const u8 wl12xx_rate_to_idx_2ghz[] = { 412 /* MCS rates are used only with 11n */ 413 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */ 414 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */ 415 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */ 416 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */ 417 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */ 418 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */ 419 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */ 420 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */ 421 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */ 422 423 11, /* WL12XX_CONF_HW_RXTX_RATE_54 */ 424 10, /* WL12XX_CONF_HW_RXTX_RATE_48 */ 425 9, /* WL12XX_CONF_HW_RXTX_RATE_36 */ 426 8, /* WL12XX_CONF_HW_RXTX_RATE_24 */ 427 428 /* TI-specific rate */ 429 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */ 430 431 7, /* WL12XX_CONF_HW_RXTX_RATE_18 */ 432 6, /* WL12XX_CONF_HW_RXTX_RATE_12 */ 433 3, /* WL12XX_CONF_HW_RXTX_RATE_11 */ 434 5, /* WL12XX_CONF_HW_RXTX_RATE_9 */ 435 4, /* WL12XX_CONF_HW_RXTX_RATE_6 */ 436 2, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */ 437 1, /* WL12XX_CONF_HW_RXTX_RATE_2 */ 438 0 /* WL12XX_CONF_HW_RXTX_RATE_1 */ 439 }; 440 441 static const u8 wl12xx_rate_to_idx_5ghz[] = { 442 /* MCS rates are used only with 11n */ 443 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI */ 444 7, /* WL12XX_CONF_HW_RXTX_RATE_MCS7 */ 445 6, /* WL12XX_CONF_HW_RXTX_RATE_MCS6 */ 446 5, /* WL12XX_CONF_HW_RXTX_RATE_MCS5 */ 447 4, /* WL12XX_CONF_HW_RXTX_RATE_MCS4 */ 448 3, /* WL12XX_CONF_HW_RXTX_RATE_MCS3 */ 449 2, /* WL12XX_CONF_HW_RXTX_RATE_MCS2 */ 450 1, /* WL12XX_CONF_HW_RXTX_RATE_MCS1 */ 451 0, /* WL12XX_CONF_HW_RXTX_RATE_MCS0 */ 452 453 7, /* WL12XX_CONF_HW_RXTX_RATE_54 */ 454 6, /* WL12XX_CONF_HW_RXTX_RATE_48 */ 455 5, /* WL12XX_CONF_HW_RXTX_RATE_36 */ 456 4, /* WL12XX_CONF_HW_RXTX_RATE_24 */ 457 458 /* TI-specific rate */ 459 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_22 */ 460 461 3, /* WL12XX_CONF_HW_RXTX_RATE_18 */ 462 2, /* WL12XX_CONF_HW_RXTX_RATE_12 */ 463 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_11 */ 464 1, /* WL12XX_CONF_HW_RXTX_RATE_9 */ 465 0, /* WL12XX_CONF_HW_RXTX_RATE_6 */ 466 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_5_5 */ 467 CONF_HW_RXTX_RATE_UNSUPPORTED, /* WL12XX_CONF_HW_RXTX_RATE_2 */ 468 CONF_HW_RXTX_RATE_UNSUPPORTED /* WL12XX_CONF_HW_RXTX_RATE_1 */ 469 }; 470 471 static const u8 *wl12xx_band_rate_to_idx[] = { 472 [NL80211_BAND_2GHZ] = wl12xx_rate_to_idx_2ghz, 473 [NL80211_BAND_5GHZ] = wl12xx_rate_to_idx_5ghz 474 }; 475 476 enum wl12xx_hw_rates { 477 WL12XX_CONF_HW_RXTX_RATE_MCS7_SGI = 0, 478 WL12XX_CONF_HW_RXTX_RATE_MCS7, 479 WL12XX_CONF_HW_RXTX_RATE_MCS6, 480 WL12XX_CONF_HW_RXTX_RATE_MCS5, 481 WL12XX_CONF_HW_RXTX_RATE_MCS4, 482 WL12XX_CONF_HW_RXTX_RATE_MCS3, 483 WL12XX_CONF_HW_RXTX_RATE_MCS2, 484 WL12XX_CONF_HW_RXTX_RATE_MCS1, 485 WL12XX_CONF_HW_RXTX_RATE_MCS0, 486 WL12XX_CONF_HW_RXTX_RATE_54, 487 WL12XX_CONF_HW_RXTX_RATE_48, 488 WL12XX_CONF_HW_RXTX_RATE_36, 489 WL12XX_CONF_HW_RXTX_RATE_24, 490 WL12XX_CONF_HW_RXTX_RATE_22, 491 WL12XX_CONF_HW_RXTX_RATE_18, 492 WL12XX_CONF_HW_RXTX_RATE_12, 493 WL12XX_CONF_HW_RXTX_RATE_11, 494 WL12XX_CONF_HW_RXTX_RATE_9, 495 WL12XX_CONF_HW_RXTX_RATE_6, 496 WL12XX_CONF_HW_RXTX_RATE_5_5, 497 WL12XX_CONF_HW_RXTX_RATE_2, 498 WL12XX_CONF_HW_RXTX_RATE_1, 499 WL12XX_CONF_HW_RXTX_RATE_MAX, 500 }; 501 502 static struct wlcore_partition_set wl12xx_ptable[PART_TABLE_LEN] = { 503 [PART_DOWN] = { 504 .mem = { 505 .start = 0x00000000, 506 .size = 0x000177c0 507 }, 508 .reg = { 509 .start = REGISTERS_BASE, 510 .size = 0x00008800 511 }, 512 .mem2 = { 513 .start = 0x00000000, 514 .size = 0x00000000 515 }, 516 .mem3 = { 517 .start = 0x00000000, 518 .size = 0x00000000 519 }, 520 }, 521 522 [PART_BOOT] = { /* in wl12xx we can use a mix of work and down 523 * partition here */ 524 .mem = { 525 .start = 0x00040000, 526 .size = 0x00014fc0 527 }, 528 .reg = { 529 .start = REGISTERS_BASE, 530 .size = 0x00008800 531 }, 532 .mem2 = { 533 .start = 0x00000000, 534 .size = 0x00000000 535 }, 536 .mem3 = { 537 .start = 0x00000000, 538 .size = 0x00000000 539 }, 540 }, 541 542 [PART_WORK] = { 543 .mem = { 544 .start = 0x00040000, 545 .size = 0x00014fc0 546 }, 547 .reg = { 548 .start = REGISTERS_BASE, 549 .size = 0x0000a000 550 }, 551 .mem2 = { 552 .start = 0x003004f8, 553 .size = 0x00000004 554 }, 555 .mem3 = { 556 .start = 0x00000000, 557 .size = 0x00040404 558 }, 559 }, 560 561 [PART_DRPW] = { 562 .mem = { 563 .start = 0x00040000, 564 .size = 0x00014fc0 565 }, 566 .reg = { 567 .start = DRPW_BASE, 568 .size = 0x00006000 569 }, 570 .mem2 = { 571 .start = 0x00000000, 572 .size = 0x00000000 573 }, 574 .mem3 = { 575 .start = 0x00000000, 576 .size = 0x00000000 577 } 578 } 579 }; 580 581 static const int wl12xx_rtable[REG_TABLE_LEN] = { 582 [REG_ECPU_CONTROL] = WL12XX_REG_ECPU_CONTROL, 583 [REG_INTERRUPT_NO_CLEAR] = WL12XX_REG_INTERRUPT_NO_CLEAR, 584 [REG_INTERRUPT_ACK] = WL12XX_REG_INTERRUPT_ACK, 585 [REG_COMMAND_MAILBOX_PTR] = WL12XX_REG_COMMAND_MAILBOX_PTR, 586 [REG_EVENT_MAILBOX_PTR] = WL12XX_REG_EVENT_MAILBOX_PTR, 587 [REG_INTERRUPT_TRIG] = WL12XX_REG_INTERRUPT_TRIG, 588 [REG_INTERRUPT_MASK] = WL12XX_REG_INTERRUPT_MASK, 589 [REG_PC_ON_RECOVERY] = WL12XX_SCR_PAD4, 590 [REG_CHIP_ID_B] = WL12XX_CHIP_ID_B, 591 [REG_CMD_MBOX_ADDRESS] = WL12XX_CMD_MBOX_ADDRESS, 592 593 /* data access memory addresses, used with partition translation */ 594 [REG_SLV_MEM_DATA] = WL1271_SLV_MEM_DATA, 595 [REG_SLV_REG_DATA] = WL1271_SLV_REG_DATA, 596 597 /* raw data access memory addresses */ 598 [REG_RAW_FW_STATUS_ADDR] = FW_STATUS_ADDR, 599 }; 600 601 /* TODO: maybe move to a new header file? */ 602 #define WL127X_FW_NAME_MULTI "ti-connectivity/wl127x-fw-5-mr.bin" 603 #define WL127X_FW_NAME_SINGLE "ti-connectivity/wl127x-fw-5-sr.bin" 604 #define WL127X_PLT_FW_NAME "ti-connectivity/wl127x-fw-5-plt.bin" 605 606 #define WL128X_FW_NAME_MULTI "ti-connectivity/wl128x-fw-5-mr.bin" 607 #define WL128X_FW_NAME_SINGLE "ti-connectivity/wl128x-fw-5-sr.bin" 608 #define WL128X_PLT_FW_NAME "ti-connectivity/wl128x-fw-5-plt.bin" 609 610 static int wl127x_prepare_read(struct wl1271 *wl, u32 rx_desc, u32 len) 611 { 612 int ret; 613 614 if (wl->chip.id != CHIP_ID_128X_PG20) { 615 struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map; 616 struct wl12xx_priv *priv = wl->priv; 617 618 /* 619 * Choose the block we want to read 620 * For aggregated packets, only the first memory block 621 * should be retrieved. The FW takes care of the rest. 622 */ 623 u32 mem_block = rx_desc & RX_MEM_BLOCK_MASK; 624 625 priv->rx_mem_addr->addr = (mem_block << 8) + 626 le32_to_cpu(wl_mem_map->packet_memory_pool_start); 627 628 priv->rx_mem_addr->addr_extra = priv->rx_mem_addr->addr + 4; 629 630 ret = wlcore_write(wl, WL1271_SLV_REG_DATA, priv->rx_mem_addr, 631 sizeof(*priv->rx_mem_addr), false); 632 if (ret < 0) 633 return ret; 634 } 635 636 return 0; 637 } 638 639 static int wl12xx_identify_chip(struct wl1271 *wl) 640 { 641 int ret = 0; 642 643 switch (wl->chip.id) { 644 case CHIP_ID_127X_PG10: 645 wl1271_warning("chip id 0x%x (1271 PG10) support is obsolete", 646 wl->chip.id); 647 648 wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | 649 WLCORE_QUIRK_DUAL_PROBE_TMPL | 650 WLCORE_QUIRK_TKIP_HEADER_SPACE | 651 WLCORE_QUIRK_START_STA_FAILS | 652 WLCORE_QUIRK_AP_ZERO_SESSION_ID; 653 wl->sr_fw_name = WL127X_FW_NAME_SINGLE; 654 wl->mr_fw_name = WL127X_FW_NAME_MULTI; 655 memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, 656 sizeof(wl->conf.mem)); 657 658 /* read data preparation is only needed by wl127x */ 659 wl->ops->prepare_read = wl127x_prepare_read; 660 661 wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, 662 WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, 663 WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, 664 WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, 665 WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); 666 break; 667 668 case CHIP_ID_127X_PG20: 669 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)", 670 wl->chip.id); 671 672 wl->quirks |= WLCORE_QUIRK_LEGACY_NVS | 673 WLCORE_QUIRK_DUAL_PROBE_TMPL | 674 WLCORE_QUIRK_TKIP_HEADER_SPACE | 675 WLCORE_QUIRK_START_STA_FAILS | 676 WLCORE_QUIRK_AP_ZERO_SESSION_ID; 677 wl->plt_fw_name = WL127X_PLT_FW_NAME; 678 wl->sr_fw_name = WL127X_FW_NAME_SINGLE; 679 wl->mr_fw_name = WL127X_FW_NAME_MULTI; 680 memcpy(&wl->conf.mem, &wl12xx_default_priv_conf.mem_wl127x, 681 sizeof(wl->conf.mem)); 682 683 /* read data preparation is only needed by wl127x */ 684 wl->ops->prepare_read = wl127x_prepare_read; 685 686 wlcore_set_min_fw_ver(wl, WL127X_CHIP_VER, 687 WL127X_IFTYPE_SR_VER, WL127X_MAJOR_SR_VER, 688 WL127X_SUBTYPE_SR_VER, WL127X_MINOR_SR_VER, 689 WL127X_IFTYPE_MR_VER, WL127X_MAJOR_MR_VER, 690 WL127X_SUBTYPE_MR_VER, WL127X_MINOR_MR_VER); 691 break; 692 693 case CHIP_ID_128X_PG20: 694 wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1283 PG20)", 695 wl->chip.id); 696 wl->plt_fw_name = WL128X_PLT_FW_NAME; 697 wl->sr_fw_name = WL128X_FW_NAME_SINGLE; 698 wl->mr_fw_name = WL128X_FW_NAME_MULTI; 699 700 /* wl128x requires TX blocksize alignment */ 701 wl->quirks |= WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN | 702 WLCORE_QUIRK_DUAL_PROBE_TMPL | 703 WLCORE_QUIRK_TKIP_HEADER_SPACE | 704 WLCORE_QUIRK_START_STA_FAILS | 705 WLCORE_QUIRK_AP_ZERO_SESSION_ID; 706 707 wlcore_set_min_fw_ver(wl, WL128X_CHIP_VER, 708 WL128X_IFTYPE_SR_VER, WL128X_MAJOR_SR_VER, 709 WL128X_SUBTYPE_SR_VER, WL128X_MINOR_SR_VER, 710 WL128X_IFTYPE_MR_VER, WL128X_MAJOR_MR_VER, 711 WL128X_SUBTYPE_MR_VER, WL128X_MINOR_MR_VER); 712 break; 713 case CHIP_ID_128X_PG10: 714 default: 715 wl1271_warning("unsupported chip id: 0x%x", wl->chip.id); 716 ret = -ENODEV; 717 goto out; 718 } 719 720 wl->fw_mem_block_size = 256; 721 wl->fwlog_end = 0x2000000; 722 723 /* common settings */ 724 wl->scan_templ_id_2_4 = CMD_TEMPL_APP_PROBE_REQ_2_4_LEGACY; 725 wl->scan_templ_id_5 = CMD_TEMPL_APP_PROBE_REQ_5_LEGACY; 726 wl->sched_scan_templ_id_2_4 = CMD_TEMPL_CFG_PROBE_REQ_2_4; 727 wl->sched_scan_templ_id_5 = CMD_TEMPL_CFG_PROBE_REQ_5; 728 wl->max_channels_5 = WL12XX_MAX_CHANNELS_5GHZ; 729 wl->ba_rx_session_count_max = WL12XX_RX_BA_MAX_SESSIONS; 730 out: 731 return ret; 732 } 733 734 static int __must_check wl12xx_top_reg_write(struct wl1271 *wl, int addr, 735 u16 val) 736 { 737 int ret; 738 739 /* write address >> 1 + 0x30000 to OCP_POR_CTR */ 740 addr = (addr >> 1) + 0x30000; 741 ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr); 742 if (ret < 0) 743 goto out; 744 745 /* write value to OCP_POR_WDATA */ 746 ret = wlcore_write32(wl, WL12XX_OCP_DATA_WRITE, val); 747 if (ret < 0) 748 goto out; 749 750 /* write 1 to OCP_CMD */ 751 ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_WRITE); 752 if (ret < 0) 753 goto out; 754 755 out: 756 return ret; 757 } 758 759 static int __must_check wl12xx_top_reg_read(struct wl1271 *wl, int addr, 760 u16 *out) 761 { 762 u32 val; 763 int timeout = OCP_CMD_LOOP; 764 int ret; 765 766 /* write address >> 1 + 0x30000 to OCP_POR_CTR */ 767 addr = (addr >> 1) + 0x30000; 768 ret = wlcore_write32(wl, WL12XX_OCP_POR_CTR, addr); 769 if (ret < 0) 770 return ret; 771 772 /* write 2 to OCP_CMD */ 773 ret = wlcore_write32(wl, WL12XX_OCP_CMD, OCP_CMD_READ); 774 if (ret < 0) 775 return ret; 776 777 /* poll for data ready */ 778 do { 779 ret = wlcore_read32(wl, WL12XX_OCP_DATA_READ, &val); 780 if (ret < 0) 781 return ret; 782 } while (!(val & OCP_READY_MASK) && --timeout); 783 784 if (!timeout) { 785 wl1271_warning("Top register access timed out."); 786 return -ETIMEDOUT; 787 } 788 789 /* check data status and return if OK */ 790 if ((val & OCP_STATUS_MASK) != OCP_STATUS_OK) { 791 wl1271_warning("Top register access returned error."); 792 return -EIO; 793 } 794 795 if (out) 796 *out = val & 0xffff; 797 798 return 0; 799 } 800 801 static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl) 802 { 803 u16 spare_reg; 804 int ret; 805 806 /* Mask bits [2] & [8:4] in the sys_clk_cfg register */ 807 ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg); 808 if (ret < 0) 809 return ret; 810 811 if (spare_reg == 0xFFFF) 812 return -EFAULT; 813 spare_reg |= (BIT(3) | BIT(5) | BIT(6)); 814 ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg); 815 if (ret < 0) 816 return ret; 817 818 /* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */ 819 ret = wl12xx_top_reg_write(wl, SYS_CLK_CFG_REG, 820 WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF); 821 if (ret < 0) 822 return ret; 823 824 /* Delay execution for 15msec, to let the HW settle */ 825 mdelay(15); 826 827 return 0; 828 } 829 830 static bool wl128x_is_tcxo_valid(struct wl1271 *wl) 831 { 832 u16 tcxo_detection; 833 int ret; 834 835 ret = wl12xx_top_reg_read(wl, TCXO_CLK_DETECT_REG, &tcxo_detection); 836 if (ret < 0) 837 return false; 838 839 if (tcxo_detection & TCXO_DET_FAILED) 840 return false; 841 842 return true; 843 } 844 845 static bool wl128x_is_fref_valid(struct wl1271 *wl) 846 { 847 u16 fref_detection; 848 int ret; 849 850 ret = wl12xx_top_reg_read(wl, FREF_CLK_DETECT_REG, &fref_detection); 851 if (ret < 0) 852 return false; 853 854 if (fref_detection & FREF_CLK_DETECT_FAIL) 855 return false; 856 857 return true; 858 } 859 860 static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl) 861 { 862 int ret; 863 864 ret = wl12xx_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL); 865 if (ret < 0) 866 goto out; 867 868 ret = wl12xx_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL); 869 if (ret < 0) 870 goto out; 871 872 ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, 873 MCS_PLL_CONFIG_REG_VAL); 874 875 out: 876 return ret; 877 } 878 879 static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk) 880 { 881 u16 spare_reg; 882 u16 pll_config; 883 u8 input_freq; 884 struct wl12xx_priv *priv = wl->priv; 885 int ret; 886 887 /* Mask bits [3:1] in the sys_clk_cfg register */ 888 ret = wl12xx_top_reg_read(wl, WL_SPARE_REG, &spare_reg); 889 if (ret < 0) 890 return ret; 891 892 if (spare_reg == 0xFFFF) 893 return -EFAULT; 894 spare_reg |= BIT(2); 895 ret = wl12xx_top_reg_write(wl, WL_SPARE_REG, spare_reg); 896 if (ret < 0) 897 return ret; 898 899 /* Handle special cases of the TCXO clock */ 900 if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_8 || 901 priv->tcxo_clock == WL12XX_TCXOCLOCK_33_6) 902 return wl128x_manually_configure_mcs_pll(wl); 903 904 /* Set the input frequency according to the selected clock source */ 905 input_freq = (clk & 1) + 1; 906 907 ret = wl12xx_top_reg_read(wl, MCS_PLL_CONFIG_REG, &pll_config); 908 if (ret < 0) 909 return ret; 910 911 if (pll_config == 0xFFFF) 912 return -EFAULT; 913 pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT); 914 pll_config |= MCS_PLL_ENABLE_HP; 915 ret = wl12xx_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config); 916 917 return ret; 918 } 919 920 /* 921 * WL128x has two clocks input - TCXO and FREF. 922 * TCXO is the main clock of the device, while FREF is used to sync 923 * between the GPS and the cellular modem. 924 * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used 925 * as the WLAN/BT main clock. 926 */ 927 static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock) 928 { 929 struct wl12xx_priv *priv = wl->priv; 930 u16 sys_clk_cfg; 931 int ret; 932 933 /* For XTAL-only modes, FREF will be used after switching from TCXO */ 934 if (priv->ref_clock == WL12XX_REFCLOCK_26_XTAL || 935 priv->ref_clock == WL12XX_REFCLOCK_38_XTAL) { 936 if (!wl128x_switch_tcxo_to_fref(wl)) 937 return -EINVAL; 938 goto fref_clk; 939 } 940 941 /* Query the HW, to determine which clock source we should use */ 942 ret = wl12xx_top_reg_read(wl, SYS_CLK_CFG_REG, &sys_clk_cfg); 943 if (ret < 0) 944 return ret; 945 946 if (sys_clk_cfg == 0xFFFF) 947 return -EINVAL; 948 if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF) 949 goto fref_clk; 950 951 /* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */ 952 if (priv->tcxo_clock == WL12XX_TCXOCLOCK_16_368 || 953 priv->tcxo_clock == WL12XX_TCXOCLOCK_32_736) { 954 if (!wl128x_switch_tcxo_to_fref(wl)) 955 return -EINVAL; 956 goto fref_clk; 957 } 958 959 /* TCXO clock is selected */ 960 if (!wl128x_is_tcxo_valid(wl)) 961 return -EINVAL; 962 *selected_clock = priv->tcxo_clock; 963 goto config_mcs_pll; 964 965 fref_clk: 966 /* FREF clock is selected */ 967 if (!wl128x_is_fref_valid(wl)) 968 return -EINVAL; 969 *selected_clock = priv->ref_clock; 970 971 config_mcs_pll: 972 return wl128x_configure_mcs_pll(wl, *selected_clock); 973 } 974 975 static int wl127x_boot_clk(struct wl1271 *wl) 976 { 977 struct wl12xx_priv *priv = wl->priv; 978 u32 pause; 979 u32 clk; 980 int ret; 981 982 if (WL127X_PG_GET_MAJOR(wl->hw_pg_ver) < 3) 983 wl->quirks |= WLCORE_QUIRK_END_OF_TRANSACTION; 984 985 if (priv->ref_clock == CONF_REF_CLK_19_2_E || 986 priv->ref_clock == CONF_REF_CLK_38_4_E || 987 priv->ref_clock == CONF_REF_CLK_38_4_M_XTAL) 988 /* ref clk: 19.2/38.4/38.4-XTAL */ 989 clk = 0x3; 990 else if (priv->ref_clock == CONF_REF_CLK_26_E || 991 priv->ref_clock == CONF_REF_CLK_26_M_XTAL || 992 priv->ref_clock == CONF_REF_CLK_52_E) 993 /* ref clk: 26/52 */ 994 clk = 0x5; 995 else 996 return -EINVAL; 997 998 if (priv->ref_clock != CONF_REF_CLK_19_2_E) { 999 u16 val; 1000 /* Set clock type (open drain) */ 1001 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_TYPE, &val); 1002 if (ret < 0) 1003 goto out; 1004 1005 val &= FREF_CLK_TYPE_BITS; 1006 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_TYPE, val); 1007 if (ret < 0) 1008 goto out; 1009 1010 /* Set clock pull mode (no pull) */ 1011 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_PULL, &val); 1012 if (ret < 0) 1013 goto out; 1014 1015 val |= NO_PULL; 1016 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_PULL, val); 1017 if (ret < 0) 1018 goto out; 1019 } else { 1020 u16 val; 1021 /* Set clock polarity */ 1022 ret = wl12xx_top_reg_read(wl, OCP_REG_CLK_POLARITY, &val); 1023 if (ret < 0) 1024 goto out; 1025 1026 val &= FREF_CLK_POLARITY_BITS; 1027 val |= CLK_REQ_OUTN_SEL; 1028 ret = wl12xx_top_reg_write(wl, OCP_REG_CLK_POLARITY, val); 1029 if (ret < 0) 1030 goto out; 1031 } 1032 1033 ret = wlcore_write32(wl, WL12XX_PLL_PARAMETERS, clk); 1034 if (ret < 0) 1035 goto out; 1036 1037 ret = wlcore_read32(wl, WL12XX_PLL_PARAMETERS, &pause); 1038 if (ret < 0) 1039 goto out; 1040 1041 wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause); 1042 1043 pause &= ~(WU_COUNTER_PAUSE_VAL); 1044 pause |= WU_COUNTER_PAUSE_VAL; 1045 ret = wlcore_write32(wl, WL12XX_WU_COUNTER_PAUSE, pause); 1046 1047 out: 1048 return ret; 1049 } 1050 1051 static int wl1271_boot_soft_reset(struct wl1271 *wl) 1052 { 1053 unsigned long timeout; 1054 u32 boot_data; 1055 int ret = 0; 1056 1057 /* perform soft reset */ 1058 ret = wlcore_write32(wl, WL12XX_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT); 1059 if (ret < 0) 1060 goto out; 1061 1062 /* SOFT_RESET is self clearing */ 1063 timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME); 1064 while (1) { 1065 ret = wlcore_read32(wl, WL12XX_SLV_SOFT_RESET, &boot_data); 1066 if (ret < 0) 1067 goto out; 1068 1069 wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data); 1070 if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0) 1071 break; 1072 1073 if (time_after(jiffies, timeout)) { 1074 /* 1.2 check pWhalBus->uSelfClearTime if the 1075 * timeout was reached */ 1076 wl1271_error("soft reset timeout"); 1077 return -1; 1078 } 1079 1080 udelay(SOFT_RESET_STALL_TIME); 1081 } 1082 1083 /* disable Rx/Tx */ 1084 ret = wlcore_write32(wl, WL12XX_ENABLE, 0x0); 1085 if (ret < 0) 1086 goto out; 1087 1088 /* disable auto calibration on start*/ 1089 ret = wlcore_write32(wl, WL12XX_SPARE_A2, 0xffff); 1090 1091 out: 1092 return ret; 1093 } 1094 1095 static int wl12xx_pre_boot(struct wl1271 *wl) 1096 { 1097 struct wl12xx_priv *priv = wl->priv; 1098 int ret = 0; 1099 u32 clk; 1100 int selected_clock = -1; 1101 1102 if (wl->chip.id == CHIP_ID_128X_PG20) { 1103 ret = wl128x_boot_clk(wl, &selected_clock); 1104 if (ret < 0) 1105 goto out; 1106 } else { 1107 ret = wl127x_boot_clk(wl); 1108 if (ret < 0) 1109 goto out; 1110 } 1111 1112 /* Continue the ELP wake up sequence */ 1113 ret = wlcore_write32(wl, WL12XX_WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL); 1114 if (ret < 0) 1115 goto out; 1116 1117 udelay(500); 1118 1119 ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); 1120 if (ret < 0) 1121 goto out; 1122 1123 /* Read-modify-write DRPW_SCRATCH_START register (see next state) 1124 to be used by DRPw FW. The RTRIM value will be added by the FW 1125 before taking DRPw out of reset */ 1126 1127 ret = wlcore_read32(wl, WL12XX_DRPW_SCRATCH_START, &clk); 1128 if (ret < 0) 1129 goto out; 1130 1131 wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk); 1132 1133 if (wl->chip.id == CHIP_ID_128X_PG20) 1134 clk |= ((selected_clock & 0x3) << 1) << 4; 1135 else 1136 clk |= (priv->ref_clock << 1) << 4; 1137 1138 ret = wlcore_write32(wl, WL12XX_DRPW_SCRATCH_START, clk); 1139 if (ret < 0) 1140 goto out; 1141 1142 ret = wlcore_set_partition(wl, &wl->ptable[PART_WORK]); 1143 if (ret < 0) 1144 goto out; 1145 1146 /* Disable interrupts */ 1147 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL); 1148 if (ret < 0) 1149 goto out; 1150 1151 ret = wl1271_boot_soft_reset(wl); 1152 if (ret < 0) 1153 goto out; 1154 1155 out: 1156 return ret; 1157 } 1158 1159 static int wl12xx_pre_upload(struct wl1271 *wl) 1160 { 1161 u32 tmp; 1162 u16 polarity; 1163 int ret; 1164 1165 /* write firmware's last address (ie. it's length) to 1166 * ACX_EEPROMLESS_IND_REG */ 1167 wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG"); 1168 1169 ret = wlcore_write32(wl, WL12XX_EEPROMLESS_IND, WL12XX_EEPROMLESS_IND); 1170 if (ret < 0) 1171 goto out; 1172 1173 ret = wlcore_read_reg(wl, REG_CHIP_ID_B, &tmp); 1174 if (ret < 0) 1175 goto out; 1176 1177 wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp); 1178 1179 /* 6. read the EEPROM parameters */ 1180 ret = wlcore_read32(wl, WL12XX_SCR_PAD2, &tmp); 1181 if (ret < 0) 1182 goto out; 1183 1184 /* WL1271: The reference driver skips steps 7 to 10 (jumps directly 1185 * to upload_fw) */ 1186 1187 if (wl->chip.id == CHIP_ID_128X_PG20) { 1188 ret = wl12xx_top_reg_write(wl, SDIO_IO_DS, HCI_IO_DS_6MA); 1189 if (ret < 0) 1190 goto out; 1191 } 1192 1193 /* polarity must be set before the firmware is loaded */ 1194 ret = wl12xx_top_reg_read(wl, OCP_REG_POLARITY, &polarity); 1195 if (ret < 0) 1196 goto out; 1197 1198 /* We use HIGH polarity, so unset the LOW bit */ 1199 polarity &= ~POLARITY_LOW; 1200 ret = wl12xx_top_reg_write(wl, OCP_REG_POLARITY, polarity); 1201 1202 out: 1203 return ret; 1204 } 1205 1206 static int wl12xx_enable_interrupts(struct wl1271 *wl) 1207 { 1208 int ret; 1209 1210 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, 1211 WL12XX_ACX_ALL_EVENTS_VECTOR); 1212 if (ret < 0) 1213 goto out; 1214 1215 wlcore_enable_interrupts(wl); 1216 ret = wlcore_write_reg(wl, REG_INTERRUPT_MASK, 1217 WL1271_ACX_INTR_ALL & ~(WL12XX_INTR_MASK)); 1218 if (ret < 0) 1219 goto disable_interrupts; 1220 1221 ret = wlcore_write32(wl, WL12XX_HI_CFG, HI_CFG_DEF_VAL); 1222 if (ret < 0) 1223 goto disable_interrupts; 1224 1225 return ret; 1226 1227 disable_interrupts: 1228 wlcore_disable_interrupts(wl); 1229 1230 out: 1231 return ret; 1232 } 1233 1234 static int wl12xx_boot(struct wl1271 *wl) 1235 { 1236 int ret; 1237 1238 ret = wl12xx_pre_boot(wl); 1239 if (ret < 0) 1240 goto out; 1241 1242 ret = wlcore_boot_upload_nvs(wl); 1243 if (ret < 0) 1244 goto out; 1245 1246 ret = wl12xx_pre_upload(wl); 1247 if (ret < 0) 1248 goto out; 1249 1250 ret = wlcore_boot_upload_firmware(wl); 1251 if (ret < 0) 1252 goto out; 1253 1254 wl->event_mask = BSS_LOSE_EVENT_ID | 1255 REGAINED_BSS_EVENT_ID | 1256 SCAN_COMPLETE_EVENT_ID | 1257 ROLE_STOP_COMPLETE_EVENT_ID | 1258 RSSI_SNR_TRIGGER_0_EVENT_ID | 1259 PSPOLL_DELIVERY_FAILURE_EVENT_ID | 1260 SOFT_GEMINI_SENSE_EVENT_ID | 1261 PERIODIC_SCAN_REPORT_EVENT_ID | 1262 PERIODIC_SCAN_COMPLETE_EVENT_ID | 1263 DUMMY_PACKET_EVENT_ID | 1264 PEER_REMOVE_COMPLETE_EVENT_ID | 1265 BA_SESSION_RX_CONSTRAINT_EVENT_ID | 1266 REMAIN_ON_CHANNEL_COMPLETE_EVENT_ID | 1267 INACTIVE_STA_EVENT_ID | 1268 CHANNEL_SWITCH_COMPLETE_EVENT_ID; 1269 1270 wl->ap_event_mask = MAX_TX_RETRY_EVENT_ID; 1271 1272 ret = wlcore_boot_run_firmware(wl); 1273 if (ret < 0) 1274 goto out; 1275 1276 ret = wl12xx_enable_interrupts(wl); 1277 1278 out: 1279 return ret; 1280 } 1281 1282 static int wl12xx_trigger_cmd(struct wl1271 *wl, int cmd_box_addr, 1283 void *buf, size_t len) 1284 { 1285 int ret; 1286 1287 ret = wlcore_write(wl, cmd_box_addr, buf, len, false); 1288 if (ret < 0) 1289 return ret; 1290 1291 ret = wlcore_write_reg(wl, REG_INTERRUPT_TRIG, WL12XX_INTR_TRIG_CMD); 1292 1293 return ret; 1294 } 1295 1296 static int wl12xx_ack_event(struct wl1271 *wl) 1297 { 1298 return wlcore_write_reg(wl, REG_INTERRUPT_TRIG, 1299 WL12XX_INTR_TRIG_EVENT_ACK); 1300 } 1301 1302 static u32 wl12xx_calc_tx_blocks(struct wl1271 *wl, u32 len, u32 spare_blks) 1303 { 1304 u32 blk_size = WL12XX_TX_HW_BLOCK_SIZE; 1305 u32 align_len = wlcore_calc_packet_alignment(wl, len); 1306 1307 return (align_len + blk_size - 1) / blk_size + spare_blks; 1308 } 1309 1310 static void 1311 wl12xx_set_tx_desc_blocks(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, 1312 u32 blks, u32 spare_blks) 1313 { 1314 if (wl->chip.id == CHIP_ID_128X_PG20) { 1315 desc->wl128x_mem.total_mem_blocks = blks; 1316 } else { 1317 desc->wl127x_mem.extra_blocks = spare_blks; 1318 desc->wl127x_mem.total_mem_blocks = blks; 1319 } 1320 } 1321 1322 static void 1323 wl12xx_set_tx_desc_data_len(struct wl1271 *wl, struct wl1271_tx_hw_descr *desc, 1324 struct sk_buff *skb) 1325 { 1326 u32 aligned_len = wlcore_calc_packet_alignment(wl, skb->len); 1327 1328 if (wl->chip.id == CHIP_ID_128X_PG20) { 1329 desc->wl128x_mem.extra_bytes = aligned_len - skb->len; 1330 desc->length = cpu_to_le16(aligned_len >> 2); 1331 1332 wl1271_debug(DEBUG_TX, 1333 "tx_fill_hdr: hlid: %d len: %d life: %d mem: %d extra: %d", 1334 desc->hlid, 1335 le16_to_cpu(desc->length), 1336 le16_to_cpu(desc->life_time), 1337 desc->wl128x_mem.total_mem_blocks, 1338 desc->wl128x_mem.extra_bytes); 1339 } else { 1340 /* calculate number of padding bytes */ 1341 int pad = aligned_len - skb->len; 1342 desc->tx_attr |= 1343 cpu_to_le16(pad << TX_HW_ATTR_OFST_LAST_WORD_PAD); 1344 1345 /* Store the aligned length in terms of words */ 1346 desc->length = cpu_to_le16(aligned_len >> 2); 1347 1348 wl1271_debug(DEBUG_TX, 1349 "tx_fill_hdr: pad: %d hlid: %d len: %d life: %d mem: %d", 1350 pad, desc->hlid, 1351 le16_to_cpu(desc->length), 1352 le16_to_cpu(desc->life_time), 1353 desc->wl127x_mem.total_mem_blocks); 1354 } 1355 } 1356 1357 static enum wl_rx_buf_align 1358 wl12xx_get_rx_buf_align(struct wl1271 *wl, u32 rx_desc) 1359 { 1360 if (rx_desc & RX_BUF_UNALIGNED_PAYLOAD) 1361 return WLCORE_RX_BUF_UNALIGNED; 1362 1363 return WLCORE_RX_BUF_ALIGNED; 1364 } 1365 1366 static u32 wl12xx_get_rx_packet_len(struct wl1271 *wl, void *rx_data, 1367 u32 data_len) 1368 { 1369 struct wl1271_rx_descriptor *desc = rx_data; 1370 1371 /* invalid packet */ 1372 if (data_len < sizeof(*desc) || 1373 data_len < sizeof(*desc) + desc->pad_len) 1374 return 0; 1375 1376 return data_len - sizeof(*desc) - desc->pad_len; 1377 } 1378 1379 static int wl12xx_tx_delayed_compl(struct wl1271 *wl) 1380 { 1381 if (wl->fw_status->tx_results_counter == 1382 (wl->tx_results_count & 0xff)) 1383 return 0; 1384 1385 return wlcore_tx_complete(wl); 1386 } 1387 1388 static int wl12xx_hw_init(struct wl1271 *wl) 1389 { 1390 int ret; 1391 1392 if (wl->chip.id == CHIP_ID_128X_PG20) { 1393 u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE; 1394 1395 ret = wl128x_cmd_general_parms(wl); 1396 if (ret < 0) 1397 goto out; 1398 1399 /* 1400 * If we are in calibrator based auto detect then we got the FEM nr 1401 * in wl->fem_manuf. No need to continue further 1402 */ 1403 if (wl->plt_mode == PLT_FEM_DETECT) 1404 goto out; 1405 1406 ret = wl128x_cmd_radio_parms(wl); 1407 if (ret < 0) 1408 goto out; 1409 1410 if (wl->quirks & WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN) 1411 /* Enable SDIO padding */ 1412 host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK; 1413 1414 /* Must be before wl1271_acx_init_mem_config() */ 1415 ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap); 1416 if (ret < 0) 1417 goto out; 1418 } else { 1419 ret = wl1271_cmd_general_parms(wl); 1420 if (ret < 0) 1421 goto out; 1422 1423 /* 1424 * If we are in calibrator based auto detect then we got the FEM nr 1425 * in wl->fem_manuf. No need to continue further 1426 */ 1427 if (wl->plt_mode == PLT_FEM_DETECT) 1428 goto out; 1429 1430 ret = wl1271_cmd_radio_parms(wl); 1431 if (ret < 0) 1432 goto out; 1433 ret = wl1271_cmd_ext_radio_parms(wl); 1434 if (ret < 0) 1435 goto out; 1436 } 1437 out: 1438 return ret; 1439 } 1440 1441 static void wl12xx_convert_fw_status(struct wl1271 *wl, void *raw_fw_status, 1442 struct wl_fw_status *fw_status) 1443 { 1444 struct wl12xx_fw_status *int_fw_status = raw_fw_status; 1445 1446 fw_status->intr = le32_to_cpu(int_fw_status->intr); 1447 fw_status->fw_rx_counter = int_fw_status->fw_rx_counter; 1448 fw_status->drv_rx_counter = int_fw_status->drv_rx_counter; 1449 fw_status->tx_results_counter = int_fw_status->tx_results_counter; 1450 fw_status->rx_pkt_descs = int_fw_status->rx_pkt_descs; 1451 1452 fw_status->fw_localtime = le32_to_cpu(int_fw_status->fw_localtime); 1453 fw_status->link_ps_bitmap = le32_to_cpu(int_fw_status->link_ps_bitmap); 1454 fw_status->link_fast_bitmap = 1455 le32_to_cpu(int_fw_status->link_fast_bitmap); 1456 fw_status->total_released_blks = 1457 le32_to_cpu(int_fw_status->total_released_blks); 1458 fw_status->tx_total = le32_to_cpu(int_fw_status->tx_total); 1459 1460 fw_status->counters.tx_released_pkts = 1461 int_fw_status->counters.tx_released_pkts; 1462 fw_status->counters.tx_lnk_free_pkts = 1463 int_fw_status->counters.tx_lnk_free_pkts; 1464 fw_status->counters.tx_voice_released_blks = 1465 int_fw_status->counters.tx_voice_released_blks; 1466 fw_status->counters.tx_last_rate = 1467 int_fw_status->counters.tx_last_rate; 1468 1469 fw_status->log_start_addr = le32_to_cpu(int_fw_status->log_start_addr); 1470 } 1471 1472 static u32 wl12xx_sta_get_ap_rate_mask(struct wl1271 *wl, 1473 struct wl12xx_vif *wlvif) 1474 { 1475 return wlvif->rate_set; 1476 } 1477 1478 static void wl12xx_conf_init(struct wl1271 *wl) 1479 { 1480 struct wl12xx_priv *priv = wl->priv; 1481 1482 /* apply driver default configuration */ 1483 memcpy(&wl->conf, &wl12xx_conf, sizeof(wl12xx_conf)); 1484 1485 /* apply default private configuration */ 1486 memcpy(&priv->conf, &wl12xx_default_priv_conf, sizeof(priv->conf)); 1487 } 1488 1489 static bool wl12xx_mac_in_fuse(struct wl1271 *wl) 1490 { 1491 bool supported = false; 1492 u8 major, minor; 1493 1494 if (wl->chip.id == CHIP_ID_128X_PG20) { 1495 major = WL128X_PG_GET_MAJOR(wl->hw_pg_ver); 1496 minor = WL128X_PG_GET_MINOR(wl->hw_pg_ver); 1497 1498 /* in wl128x we have the MAC address if the PG is >= (2, 1) */ 1499 if (major > 2 || (major == 2 && minor >= 1)) 1500 supported = true; 1501 } else { 1502 major = WL127X_PG_GET_MAJOR(wl->hw_pg_ver); 1503 minor = WL127X_PG_GET_MINOR(wl->hw_pg_ver); 1504 1505 /* in wl127x we have the MAC address if the PG is >= (3, 1) */ 1506 if (major == 3 && minor >= 1) 1507 supported = true; 1508 } 1509 1510 wl1271_debug(DEBUG_PROBE, 1511 "PG Ver major = %d minor = %d, MAC %s present", 1512 major, minor, supported ? "is" : "is not"); 1513 1514 return supported; 1515 } 1516 1517 static int wl12xx_get_fuse_mac(struct wl1271 *wl) 1518 { 1519 u32 mac1, mac2; 1520 int ret; 1521 1522 ret = wlcore_set_partition(wl, &wl->ptable[PART_DRPW]); 1523 if (ret < 0) 1524 goto out; 1525 1526 ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_1, &mac1); 1527 if (ret < 0) 1528 goto out; 1529 1530 ret = wlcore_read32(wl, WL12XX_REG_FUSE_BD_ADDR_2, &mac2); 1531 if (ret < 0) 1532 goto out; 1533 1534 /* these are the two parts of the BD_ADDR */ 1535 wl->fuse_oui_addr = ((mac2 & 0xffff) << 8) + 1536 ((mac1 & 0xff000000) >> 24); 1537 wl->fuse_nic_addr = mac1 & 0xffffff; 1538 1539 ret = wlcore_set_partition(wl, &wl->ptable[PART_DOWN]); 1540 1541 out: 1542 return ret; 1543 } 1544 1545 static int wl12xx_get_pg_ver(struct wl1271 *wl, s8 *ver) 1546 { 1547 u16 die_info; 1548 int ret; 1549 1550 if (wl->chip.id == CHIP_ID_128X_PG20) 1551 ret = wl12xx_top_reg_read(wl, WL128X_REG_FUSE_DATA_2_1, 1552 &die_info); 1553 else 1554 ret = wl12xx_top_reg_read(wl, WL127X_REG_FUSE_DATA_2_1, 1555 &die_info); 1556 1557 if (ret >= 0 && ver) 1558 *ver = (s8)((die_info & PG_VER_MASK) >> PG_VER_OFFSET); 1559 1560 return ret; 1561 } 1562 1563 static int wl12xx_get_mac(struct wl1271 *wl) 1564 { 1565 if (wl12xx_mac_in_fuse(wl)) 1566 return wl12xx_get_fuse_mac(wl); 1567 1568 return 0; 1569 } 1570 1571 static void wl12xx_set_tx_desc_csum(struct wl1271 *wl, 1572 struct wl1271_tx_hw_descr *desc, 1573 struct sk_buff *skb) 1574 { 1575 desc->wl12xx_reserved = 0; 1576 } 1577 1578 static int wl12xx_plt_init(struct wl1271 *wl) 1579 { 1580 int ret; 1581 1582 ret = wl->ops->boot(wl); 1583 if (ret < 0) 1584 goto out; 1585 1586 ret = wl->ops->hw_init(wl); 1587 if (ret < 0) 1588 goto out_irq_disable; 1589 1590 /* 1591 * If we are in calibrator based auto detect then we got the FEM nr 1592 * in wl->fem_manuf. No need to continue further 1593 */ 1594 if (wl->plt_mode == PLT_FEM_DETECT) 1595 goto out; 1596 1597 ret = wl1271_acx_init_mem_config(wl); 1598 if (ret < 0) 1599 goto out_irq_disable; 1600 1601 ret = wl12xx_acx_mem_cfg(wl); 1602 if (ret < 0) 1603 goto out_free_memmap; 1604 1605 /* Enable data path */ 1606 ret = wl1271_cmd_data_path(wl, 1); 1607 if (ret < 0) 1608 goto out_free_memmap; 1609 1610 /* Configure for CAM power saving (ie. always active) */ 1611 ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM); 1612 if (ret < 0) 1613 goto out_free_memmap; 1614 1615 /* configure PM */ 1616 ret = wl1271_acx_pm_config(wl); 1617 if (ret < 0) 1618 goto out_free_memmap; 1619 1620 goto out; 1621 1622 out_free_memmap: 1623 kfree(wl->target_mem_map); 1624 wl->target_mem_map = NULL; 1625 1626 out_irq_disable: 1627 mutex_unlock(&wl->mutex); 1628 /* Unlocking the mutex in the middle of handling is 1629 inherently unsafe. In this case we deem it safe to do, 1630 because we need to let any possibly pending IRQ out of 1631 the system (and while we are WL1271_STATE_OFF the IRQ 1632 work function will not do anything.) Also, any other 1633 possible concurrent operations will fail due to the 1634 current state, hence the wl1271 struct should be safe. */ 1635 wlcore_disable_interrupts(wl); 1636 mutex_lock(&wl->mutex); 1637 out: 1638 return ret; 1639 } 1640 1641 static int wl12xx_get_spare_blocks(struct wl1271 *wl, bool is_gem) 1642 { 1643 if (is_gem) 1644 return WL12XX_TX_HW_BLOCK_GEM_SPARE; 1645 1646 return WL12XX_TX_HW_BLOCK_SPARE_DEFAULT; 1647 } 1648 1649 static int wl12xx_set_key(struct wl1271 *wl, enum set_key_cmd cmd, 1650 struct ieee80211_vif *vif, 1651 struct ieee80211_sta *sta, 1652 struct ieee80211_key_conf *key_conf) 1653 { 1654 return wlcore_set_key(wl, cmd, vif, sta, key_conf); 1655 } 1656 1657 static int wl12xx_set_peer_cap(struct wl1271 *wl, 1658 struct ieee80211_sta_ht_cap *ht_cap, 1659 bool allow_ht_operation, 1660 u32 rate_set, u8 hlid) 1661 { 1662 return wl1271_acx_set_ht_capabilities(wl, ht_cap, allow_ht_operation, 1663 hlid); 1664 } 1665 1666 static bool wl12xx_lnk_high_prio(struct wl1271 *wl, u8 hlid, 1667 struct wl1271_link *lnk) 1668 { 1669 u8 thold; 1670 1671 if (test_bit(hlid, &wl->fw_fast_lnk_map)) 1672 thold = wl->conf.tx.fast_link_thold; 1673 else 1674 thold = wl->conf.tx.slow_link_thold; 1675 1676 return lnk->allocated_pkts < thold; 1677 } 1678 1679 static bool wl12xx_lnk_low_prio(struct wl1271 *wl, u8 hlid, 1680 struct wl1271_link *lnk) 1681 { 1682 /* any link is good for low priority */ 1683 return true; 1684 } 1685 1686 static u32 wl12xx_convert_hwaddr(struct wl1271 *wl, u32 hwaddr) 1687 { 1688 return hwaddr << 5; 1689 } 1690 1691 static int wl12xx_setup(struct wl1271 *wl); 1692 1693 static struct wlcore_ops wl12xx_ops = { 1694 .setup = wl12xx_setup, 1695 .identify_chip = wl12xx_identify_chip, 1696 .boot = wl12xx_boot, 1697 .plt_init = wl12xx_plt_init, 1698 .trigger_cmd = wl12xx_trigger_cmd, 1699 .ack_event = wl12xx_ack_event, 1700 .wait_for_event = wl12xx_wait_for_event, 1701 .process_mailbox_events = wl12xx_process_mailbox_events, 1702 .calc_tx_blocks = wl12xx_calc_tx_blocks, 1703 .set_tx_desc_blocks = wl12xx_set_tx_desc_blocks, 1704 .set_tx_desc_data_len = wl12xx_set_tx_desc_data_len, 1705 .get_rx_buf_align = wl12xx_get_rx_buf_align, 1706 .get_rx_packet_len = wl12xx_get_rx_packet_len, 1707 .tx_immediate_compl = NULL, 1708 .tx_delayed_compl = wl12xx_tx_delayed_compl, 1709 .hw_init = wl12xx_hw_init, 1710 .init_vif = NULL, 1711 .convert_fw_status = wl12xx_convert_fw_status, 1712 .sta_get_ap_rate_mask = wl12xx_sta_get_ap_rate_mask, 1713 .get_pg_ver = wl12xx_get_pg_ver, 1714 .get_mac = wl12xx_get_mac, 1715 .set_tx_desc_csum = wl12xx_set_tx_desc_csum, 1716 .set_rx_csum = NULL, 1717 .ap_get_mimo_wide_rate_mask = NULL, 1718 .debugfs_init = wl12xx_debugfs_add_files, 1719 .scan_start = wl12xx_scan_start, 1720 .scan_stop = wl12xx_scan_stop, 1721 .sched_scan_start = wl12xx_sched_scan_start, 1722 .sched_scan_stop = wl12xx_scan_sched_scan_stop, 1723 .get_spare_blocks = wl12xx_get_spare_blocks, 1724 .set_key = wl12xx_set_key, 1725 .channel_switch = wl12xx_cmd_channel_switch, 1726 .pre_pkt_send = NULL, 1727 .set_peer_cap = wl12xx_set_peer_cap, 1728 .convert_hwaddr = wl12xx_convert_hwaddr, 1729 .lnk_high_prio = wl12xx_lnk_high_prio, 1730 .lnk_low_prio = wl12xx_lnk_low_prio, 1731 .interrupt_notify = NULL, 1732 .rx_ba_filter = NULL, 1733 .ap_sleep = NULL, 1734 }; 1735 1736 static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { 1737 .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | 1738 (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT), 1739 .ht_supported = true, 1740 .ampdu_factor = IEEE80211_HT_MAX_AMPDU_8K, 1741 .ampdu_density = IEEE80211_HT_MPDU_DENSITY_8, 1742 .mcs = { 1743 .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, 1744 .rx_highest = cpu_to_le16(72), 1745 .tx_params = IEEE80211_HT_MCS_TX_DEFINED, 1746 }, 1747 }; 1748 1749 static const struct ieee80211_iface_limit wl12xx_iface_limits[] = { 1750 { 1751 .max = 3, 1752 .types = BIT(NL80211_IFTYPE_STATION), 1753 }, 1754 { 1755 .max = 1, 1756 .types = BIT(NL80211_IFTYPE_AP) | 1757 BIT(NL80211_IFTYPE_P2P_GO) | 1758 BIT(NL80211_IFTYPE_P2P_CLIENT), 1759 }, 1760 }; 1761 1762 static const struct ieee80211_iface_combination 1763 wl12xx_iface_combinations[] = { 1764 { 1765 .max_interfaces = 3, 1766 .limits = wl12xx_iface_limits, 1767 .n_limits = ARRAY_SIZE(wl12xx_iface_limits), 1768 .num_different_channels = 1, 1769 }, 1770 }; 1771 1772 static const struct wl12xx_clock wl12xx_refclock_table[] = { 1773 { 19200000, false, WL12XX_REFCLOCK_19 }, 1774 { 26000000, false, WL12XX_REFCLOCK_26 }, 1775 { 26000000, true, WL12XX_REFCLOCK_26_XTAL }, 1776 { 38400000, false, WL12XX_REFCLOCK_38 }, 1777 { 38400000, true, WL12XX_REFCLOCK_38_XTAL }, 1778 { 52000000, false, WL12XX_REFCLOCK_52 }, 1779 { 0, false, 0 } 1780 }; 1781 1782 static const struct wl12xx_clock wl12xx_tcxoclock_table[] = { 1783 { 16368000, true, WL12XX_TCXOCLOCK_16_368 }, 1784 { 16800000, true, WL12XX_TCXOCLOCK_16_8 }, 1785 { 19200000, true, WL12XX_TCXOCLOCK_19_2 }, 1786 { 26000000, true, WL12XX_TCXOCLOCK_26 }, 1787 { 32736000, true, WL12XX_TCXOCLOCK_32_736 }, 1788 { 33600000, true, WL12XX_TCXOCLOCK_33_6 }, 1789 { 38400000, true, WL12XX_TCXOCLOCK_38_4 }, 1790 { 52000000, true, WL12XX_TCXOCLOCK_52 }, 1791 { 0, false, 0 } 1792 }; 1793 1794 static int wl12xx_get_clock_idx(const struct wl12xx_clock *table, 1795 u32 freq, bool xtal) 1796 { 1797 int i; 1798 1799 for (i = 0; table[i].freq != 0; i++) 1800 if ((table[i].freq == freq) && (table[i].xtal == xtal)) 1801 return table[i].hw_idx; 1802 1803 return -EINVAL; 1804 } 1805 1806 static int wl12xx_setup(struct wl1271 *wl) 1807 { 1808 struct wl12xx_priv *priv = wl->priv; 1809 struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev); 1810 1811 BUILD_BUG_ON(WL12XX_MAX_LINKS > WLCORE_MAX_LINKS); 1812 BUILD_BUG_ON(WL12XX_MAX_AP_STATIONS > WL12XX_MAX_LINKS); 1813 BUILD_BUG_ON(WL12XX_CONF_SG_PARAMS_MAX > WLCORE_CONF_SG_PARAMS_MAX); 1814 1815 wl->rtable = wl12xx_rtable; 1816 wl->num_tx_desc = WL12XX_NUM_TX_DESCRIPTORS; 1817 wl->num_rx_desc = WL12XX_NUM_RX_DESCRIPTORS; 1818 wl->num_links = WL12XX_MAX_LINKS; 1819 wl->max_ap_stations = WL12XX_MAX_AP_STATIONS; 1820 wl->iface_combinations = wl12xx_iface_combinations; 1821 wl->n_iface_combinations = ARRAY_SIZE(wl12xx_iface_combinations); 1822 wl->num_mac_addr = WL12XX_NUM_MAC_ADDRESSES; 1823 wl->band_rate_to_idx = wl12xx_band_rate_to_idx; 1824 wl->hw_tx_rate_tbl_size = WL12XX_CONF_HW_RXTX_RATE_MAX; 1825 wl->hw_min_ht_rate = WL12XX_CONF_HW_RXTX_RATE_MCS0; 1826 wl->fw_status_len = sizeof(struct wl12xx_fw_status); 1827 wl->fw_status_priv_len = 0; 1828 wl->stats.fw_stats_len = sizeof(struct wl12xx_acx_statistics); 1829 wl->ofdm_only_ap = true; 1830 wlcore_set_ht_cap(wl, NL80211_BAND_2GHZ, &wl12xx_ht_cap); 1831 wlcore_set_ht_cap(wl, NL80211_BAND_5GHZ, &wl12xx_ht_cap); 1832 wl12xx_conf_init(wl); 1833 1834 if (!fref_param) { 1835 priv->ref_clock = wl12xx_get_clock_idx(wl12xx_refclock_table, 1836 pdev_data->ref_clock_freq, 1837 pdev_data->ref_clock_xtal); 1838 if (priv->ref_clock < 0) { 1839 wl1271_error("Invalid ref_clock frequency (%d Hz, %s)", 1840 pdev_data->ref_clock_freq, 1841 pdev_data->ref_clock_xtal ? 1842 "XTAL" : "not XTAL"); 1843 1844 return priv->ref_clock; 1845 } 1846 } else { 1847 if (!strcmp(fref_param, "19.2")) 1848 priv->ref_clock = WL12XX_REFCLOCK_19; 1849 else if (!strcmp(fref_param, "26")) 1850 priv->ref_clock = WL12XX_REFCLOCK_26; 1851 else if (!strcmp(fref_param, "26x")) 1852 priv->ref_clock = WL12XX_REFCLOCK_26_XTAL; 1853 else if (!strcmp(fref_param, "38.4")) 1854 priv->ref_clock = WL12XX_REFCLOCK_38; 1855 else if (!strcmp(fref_param, "38.4x")) 1856 priv->ref_clock = WL12XX_REFCLOCK_38_XTAL; 1857 else if (!strcmp(fref_param, "52")) 1858 priv->ref_clock = WL12XX_REFCLOCK_52; 1859 else 1860 wl1271_error("Invalid fref parameter %s", fref_param); 1861 } 1862 1863 if (!tcxo_param && pdev_data->tcxo_clock_freq) { 1864 priv->tcxo_clock = wl12xx_get_clock_idx(wl12xx_tcxoclock_table, 1865 pdev_data->tcxo_clock_freq, 1866 true); 1867 if (priv->tcxo_clock < 0) { 1868 wl1271_error("Invalid tcxo_clock frequency (%d Hz)", 1869 pdev_data->tcxo_clock_freq); 1870 1871 return priv->tcxo_clock; 1872 } 1873 } else if (tcxo_param) { 1874 if (!strcmp(tcxo_param, "19.2")) 1875 priv->tcxo_clock = WL12XX_TCXOCLOCK_19_2; 1876 else if (!strcmp(tcxo_param, "26")) 1877 priv->tcxo_clock = WL12XX_TCXOCLOCK_26; 1878 else if (!strcmp(tcxo_param, "38.4")) 1879 priv->tcxo_clock = WL12XX_TCXOCLOCK_38_4; 1880 else if (!strcmp(tcxo_param, "52")) 1881 priv->tcxo_clock = WL12XX_TCXOCLOCK_52; 1882 else if (!strcmp(tcxo_param, "16.368")) 1883 priv->tcxo_clock = WL12XX_TCXOCLOCK_16_368; 1884 else if (!strcmp(tcxo_param, "32.736")) 1885 priv->tcxo_clock = WL12XX_TCXOCLOCK_32_736; 1886 else if (!strcmp(tcxo_param, "16.8")) 1887 priv->tcxo_clock = WL12XX_TCXOCLOCK_16_8; 1888 else if (!strcmp(tcxo_param, "33.6")) 1889 priv->tcxo_clock = WL12XX_TCXOCLOCK_33_6; 1890 else 1891 wl1271_error("Invalid tcxo parameter %s", tcxo_param); 1892 } 1893 1894 priv->rx_mem_addr = kmalloc(sizeof(*priv->rx_mem_addr), GFP_KERNEL); 1895 if (!priv->rx_mem_addr) 1896 return -ENOMEM; 1897 1898 return 0; 1899 } 1900 1901 static int wl12xx_probe(struct platform_device *pdev) 1902 { 1903 struct wl1271 *wl; 1904 struct ieee80211_hw *hw; 1905 int ret; 1906 1907 hw = wlcore_alloc_hw(sizeof(struct wl12xx_priv), 1908 WL12XX_AGGR_BUFFER_SIZE, 1909 sizeof(struct wl12xx_event_mailbox)); 1910 if (IS_ERR(hw)) { 1911 wl1271_error("can't allocate hw"); 1912 ret = PTR_ERR(hw); 1913 goto out; 1914 } 1915 1916 wl = hw->priv; 1917 wl->ops = &wl12xx_ops; 1918 wl->ptable = wl12xx_ptable; 1919 ret = wlcore_probe(wl, pdev); 1920 if (ret) 1921 goto out_free; 1922 1923 return ret; 1924 1925 out_free: 1926 wlcore_free_hw(wl); 1927 out: 1928 return ret; 1929 } 1930 1931 static int wl12xx_remove(struct platform_device *pdev) 1932 { 1933 struct wl1271 *wl = platform_get_drvdata(pdev); 1934 struct wl12xx_priv *priv; 1935 1936 if (!wl) 1937 goto out; 1938 priv = wl->priv; 1939 1940 kfree(priv->rx_mem_addr); 1941 1942 out: 1943 return wlcore_remove(pdev); 1944 } 1945 1946 static const struct platform_device_id wl12xx_id_table[] = { 1947 { "wl12xx", 0 }, 1948 { } /* Terminating Entry */ 1949 }; 1950 MODULE_DEVICE_TABLE(platform, wl12xx_id_table); 1951 1952 static struct platform_driver wl12xx_driver = { 1953 .probe = wl12xx_probe, 1954 .remove = wl12xx_remove, 1955 .id_table = wl12xx_id_table, 1956 .driver = { 1957 .name = "wl12xx_driver", 1958 } 1959 }; 1960 1961 module_platform_driver(wl12xx_driver); 1962 1963 module_param_named(fref, fref_param, charp, 0); 1964 MODULE_PARM_DESC(fref, "FREF clock: 19.2, 26, 26x, 38.4, 38.4x, 52"); 1965 1966 module_param_named(tcxo, tcxo_param, charp, 0); 1967 MODULE_PARM_DESC(tcxo, 1968 "TCXO clock: 19.2, 26, 38.4, 52, 16.368, 32.736, 16.8, 33.6"); 1969 1970 MODULE_LICENSE("GPL v2"); 1971 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>"); 1972 MODULE_FIRMWARE(WL127X_FW_NAME_SINGLE); 1973 MODULE_FIRMWARE(WL127X_FW_NAME_MULTI); 1974 MODULE_FIRMWARE(WL127X_PLT_FW_NAME); 1975 MODULE_FIRMWARE(WL128X_FW_NAME_SINGLE); 1976 MODULE_FIRMWARE(WL128X_FW_NAME_MULTI); 1977 MODULE_FIRMWARE(WL128X_PLT_FW_NAME); 1978