xref: /openbmc/linux/drivers/net/wireless/ti/wl1251/cmd.h (revision e23feb16)
1 /*
2  * This file is part of wl1251
3  *
4  * Copyright (c) 1998-2007 Texas Instruments Incorporated
5  * Copyright (C) 2008 Nokia Corporation
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * version 2 as published by the Free Software Foundation.
10  *
11  * This program is distributed in the hope that it will be useful, but
12  * WITHOUT ANY WARRANTY; without even the implied warranty of
13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
14  * General Public License for more details.
15  *
16  * You should have received a copy of the GNU General Public License
17  * along with this program; if not, write to the Free Software
18  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
19  * 02110-1301 USA
20  *
21  */
22 
23 #ifndef __WL1251_CMD_H__
24 #define __WL1251_CMD_H__
25 
26 #include "wl1251.h"
27 
28 #include <net/cfg80211.h>
29 
30 struct acx_header;
31 
32 int wl1251_cmd_send(struct wl1251 *wl, u16 type, void *buf, size_t buf_len);
33 int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer);
34 int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len);
35 int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len);
36 int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity,
37 		   void *bitmap, u16 bitmap_len, u8 bitmap_control);
38 int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable);
39 int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel,
40 		    u16 beacon_interval, u8 dtim_interval);
41 int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode);
42 int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer,
43 			   size_t len);
44 int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id,
45 			    void *buf, size_t buf_len);
46 int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len,
47 		    struct ieee80211_channel *channels[],
48 		    unsigned int n_channels, unsigned int n_probes);
49 int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout);
50 
51 /* unit ms */
52 #define WL1251_COMMAND_TIMEOUT 2000
53 
54 enum wl1251_commands {
55 	CMD_RESET           = 0,
56 	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
57 	CMD_CONFIGURE       = 2,    /*use this to write information elements*/
58 	CMD_ENABLE_RX       = 3,
59 	CMD_ENABLE_TX       = 4,
60 	CMD_DISABLE_RX      = 5,
61 	CMD_DISABLE_TX      = 6,
62 	CMD_SCAN            = 8,
63 	CMD_STOP_SCAN       = 9,
64 	CMD_VBM             = 10,
65 	CMD_START_JOIN      = 11,
66 	CMD_SET_KEYS        = 12,
67 	CMD_READ_MEMORY     = 13,
68 	CMD_WRITE_MEMORY    = 14,
69 	CMD_BEACON          = 19,
70 	CMD_PROBE_RESP      = 20,
71 	CMD_NULL_DATA       = 21,
72 	CMD_PROBE_REQ       = 22,
73 	CMD_TEST            = 23,
74 	CMD_RADIO_CALIBRATE     = 25,   /* OBSOLETE */
75 	CMD_ENABLE_RX_PATH      = 27,   /* OBSOLETE */
76 	CMD_NOISE_HIST      = 28,
77 	CMD_RX_RESET        = 29,
78 	CMD_PS_POLL         = 30,
79 	CMD_QOS_NULL_DATA   = 31,
80 	CMD_LNA_CONTROL     = 32,
81 	CMD_SET_BCN_MODE    = 33,
82 	CMD_MEASUREMENT      = 34,
83 	CMD_STOP_MEASUREMENT = 35,
84 	CMD_DISCONNECT       = 36,
85 	CMD_SET_PS_MODE      = 37,
86 	CMD_CHANNEL_SWITCH   = 38,
87 	CMD_STOP_CHANNEL_SWICTH = 39,
88 	CMD_AP_DISCOVERY     = 40,
89 	CMD_STOP_AP_DISCOVERY = 41,
90 	CMD_SPS_SCAN = 42,
91 	CMD_STOP_SPS_SCAN = 43,
92 	CMD_HEALTH_CHECK     = 45,
93 	CMD_DEBUG            = 46,
94 	CMD_TRIGGER_SCAN_TO  = 47,
95 
96 	NUM_COMMANDS,
97 	MAX_COMMAND_ID = 0xFFFF,
98 };
99 
100 #define MAX_CMD_PARAMS 572
101 
102 struct wl1251_cmd_header {
103 	u16 id;
104 	u16 status;
105 	/* payload */
106 	u8 data[0];
107 } __packed;
108 
109 struct  wl1251_command {
110 	struct wl1251_cmd_header header;
111 	u8  parameters[MAX_CMD_PARAMS];
112 } __packed;
113 
114 enum {
115 	CMD_MAILBOX_IDLE              		=  0,
116 	CMD_STATUS_SUCCESS            		=  1,
117 	CMD_STATUS_UNKNOWN_CMD        		=  2,
118 	CMD_STATUS_UNKNOWN_IE         		=  3,
119 	CMD_STATUS_REJECT_MEAS_SG_ACTIVE 	= 11,
120 	CMD_STATUS_RX_BUSY            		= 13,
121 	CMD_STATUS_INVALID_PARAM      		= 14,
122 	CMD_STATUS_TEMPLATE_TOO_LARGE 		= 15,
123 	CMD_STATUS_OUT_OF_MEMORY      		= 16,
124 	CMD_STATUS_STA_TABLE_FULL     		= 17,
125 	CMD_STATUS_RADIO_ERROR        		= 18,
126 	CMD_STATUS_WRONG_NESTING      		= 19,
127 	CMD_STATUS_TIMEOUT            		= 21, /* Driver internal use.*/
128 	CMD_STATUS_FW_RESET           		= 22, /* Driver internal use.*/
129 	MAX_COMMAND_STATUS            		= 0xff
130 };
131 
132 
133 /*
134  * CMD_READ_MEMORY
135  *
136  * The host issues this command to read the WiLink device memory/registers.
137  *
138  * Note: The Base Band address has special handling (16 bits registers and
139  * addresses). For more information, see the hardware specification.
140  */
141 /*
142  * CMD_WRITE_MEMORY
143  *
144  * The host issues this command to write the WiLink device memory/registers.
145  *
146  * The Base Band address has special handling (16 bits registers and
147  * addresses). For more information, see the hardware specification.
148  */
149 #define MAX_READ_SIZE 256
150 
151 struct cmd_read_write_memory {
152 	struct wl1251_cmd_header header;
153 
154 	/* The address of the memory to read from or write to.*/
155 	u32 addr;
156 
157 	/* The amount of data in bytes to read from or write to the WiLink
158 	 * device.*/
159 	u32 size;
160 
161 	/* The actual value read from or written to the Wilink. The source
162 	   of this field is the Host in WRITE command or the Wilink in READ
163 	   command. */
164 	u8 value[MAX_READ_SIZE];
165 } __packed;
166 
167 #define CMDMBOX_HEADER_LEN 4
168 #define CMDMBOX_INFO_ELEM_HEADER_LEN 4
169 
170 #define WL1251_SCAN_MIN_DURATION 30000
171 #define WL1251_SCAN_MAX_DURATION 60000
172 
173 #define WL1251_SCAN_NUM_PROBES 3
174 
175 struct wl1251_scan_parameters {
176 	__le32 rx_config_options;
177 	__le32 rx_filter_options;
178 
179 	/*
180 	 * Scan options:
181 	 * bit 0: When this bit is set, passive scan.
182 	 * bit 1: Band, when this bit is set we scan
183 	 * in the 5Ghz band.
184 	 * bit 2: voice mode, 0 for normal scan.
185 	 * bit 3: scan priority, 1 for high priority.
186 	 */
187 	__le16 scan_options;
188 
189 	/* Number of channels to scan */
190 	u8 num_channels;
191 
192 	/* Number opf probe requests to send, per channel */
193 	u8 num_probe_requests;
194 
195 	/* Rate and modulation for probe requests */
196 	__le16 tx_rate;
197 
198 	u8 tid_trigger;
199 	u8 ssid_len;
200 	u8 ssid[32];
201 
202 } __packed;
203 
204 struct wl1251_scan_ch_parameters {
205 	__le32 min_duration; /* in TU */
206 	__le32 max_duration; /* in TU */
207 	u32 bssid_lsb;
208 	u16 bssid_msb;
209 
210 	/*
211 	 * bits 0-3: Early termination count.
212 	 * bits 4-5: Early termination condition.
213 	 */
214 	u8 early_termination;
215 
216 	u8 tx_power_att;
217 	u8 channel;
218 	u8 pad[3];
219 } __packed;
220 
221 /* SCAN parameters */
222 #define SCAN_MAX_NUM_OF_CHANNELS 16
223 
224 struct wl1251_cmd_scan {
225 	struct wl1251_cmd_header header;
226 
227 	struct wl1251_scan_parameters params;
228 	struct wl1251_scan_ch_parameters channels[SCAN_MAX_NUM_OF_CHANNELS];
229 } __packed;
230 
231 enum {
232 	BSS_TYPE_IBSS = 0,
233 	BSS_TYPE_STA_BSS = 2,
234 	BSS_TYPE_AP_BSS = 3,
235 	MAX_BSS_TYPE = 0xFF
236 };
237 
238 #define JOIN_CMD_CTRL_TX_FLUSH             0x80 /* Firmware flushes all Tx */
239 #define JOIN_CMD_CTRL_EARLY_WAKEUP_ENABLE  0x01 /* Early wakeup time */
240 
241 
242 struct cmd_join {
243 	struct wl1251_cmd_header header;
244 
245 	u32 bssid_lsb;
246 	u16 bssid_msb;
247 	u16 beacon_interval; /* in TBTTs */
248 	u32 rx_config_options;
249 	u32 rx_filter_options;
250 
251 	/*
252 	 * The target uses this field to determine the rate at
253 	 * which to transmit control frame responses (such as
254 	 * ACK or CTS frames).
255 	 */
256 	u16 basic_rate_set;
257 	u8 dtim_interval;
258 	u8 tx_ctrl_frame_rate; /* OBSOLETE */
259 	u8 tx_ctrl_frame_mod;  /* OBSOLETE */
260 	/*
261 	 * bits 0-2: This bitwise field specifies the type
262 	 * of BSS to start or join (BSS_TYPE_*).
263 	 * bit 4: Band - The radio band in which to join
264 	 * or start.
265 	 *  0 - 2.4GHz band
266 	 *  1 - 5GHz band
267 	 * bits 3, 5-7: Reserved
268 	 */
269 	u8 bss_type;
270 	u8 channel;
271 	u8 ssid_len;
272 	u8 ssid[IEEE80211_MAX_SSID_LEN];
273 	u8 ctrl; /* JOIN_CMD_CTRL_* */
274 	u8 tx_mgt_frame_rate; /* OBSOLETE */
275 	u8 tx_mgt_frame_mod;  /* OBSOLETE */
276 	u8 reserved;
277 } __packed;
278 
279 struct cmd_enabledisable_path {
280 	struct wl1251_cmd_header header;
281 
282 	u8 channel;
283 	u8 padding[3];
284 } __packed;
285 
286 #define WL1251_MAX_TEMPLATE_SIZE 300
287 
288 struct wl1251_cmd_packet_template {
289 	struct wl1251_cmd_header header;
290 
291 	__le16 size;
292 	u8 data[0];
293 } __packed;
294 
295 #define TIM_ELE_ID    5
296 #define PARTIAL_VBM_MAX    251
297 
298 struct wl1251_tim {
299 	u8 identity;
300 	u8 length;
301 	u8 dtim_count;
302 	u8 dtim_period;
303 	u8 bitmap_ctrl;
304 	u8 pvb_field[PARTIAL_VBM_MAX]; /* Partial Virtual Bitmap */
305 } __packed;
306 
307 /* Virtual Bit Map update */
308 struct wl1251_cmd_vbm_update {
309 	struct wl1251_cmd_header header;
310 	__le16 len;
311 	u8  padding[2];
312 	struct wl1251_tim tim;
313 } __packed;
314 
315 enum wl1251_cmd_ps_mode {
316 	CHIP_ACTIVE_MODE,
317 	CHIP_POWER_SAVE_MODE
318 };
319 
320 struct wl1251_cmd_ps_params {
321 	struct wl1251_cmd_header header;
322 
323 	u8 ps_mode; /* STATION_* */
324 	u8 send_null_data; /* Do we have to send NULL data packet ? */
325 	u8 retries; /* Number of retires for the initial NULL data packet */
326 
327 	 /*
328 	  * TUs during which the target stays awake after switching
329 	  * to power save mode.
330 	  */
331 	u8 hang_over_period;
332 	u16 null_data_rate;
333 	u8 pad[2];
334 } __packed;
335 
336 struct wl1251_cmd_trigger_scan_to {
337 	struct wl1251_cmd_header header;
338 
339 	u32 timeout;
340 } __packed;
341 
342 /* HW encryption keys */
343 #define NUM_ACCESS_CATEGORIES_COPY 4
344 #define MAX_KEY_SIZE 32
345 
346 /* When set, disable HW encryption */
347 #define DF_ENCRYPTION_DISABLE      0x01
348 /* When set, disable HW decryption */
349 #define DF_SNIFF_MODE_ENABLE       0x80
350 
351 enum wl1251_cmd_key_action {
352 	KEY_ADD_OR_REPLACE = 1,
353 	KEY_REMOVE         = 2,
354 	KEY_SET_ID         = 3,
355 	MAX_KEY_ACTION     = 0xffff,
356 };
357 
358 enum wl1251_cmd_key_type {
359 	KEY_WEP_DEFAULT       = 0,
360 	KEY_WEP_ADDR          = 1,
361 	KEY_AES_GROUP         = 4,
362 	KEY_AES_PAIRWISE      = 5,
363 	KEY_WEP_GROUP         = 6,
364 	KEY_TKIP_MIC_GROUP    = 10,
365 	KEY_TKIP_MIC_PAIRWISE = 11,
366 };
367 
368 /*
369  *
370  * key_type_e   key size    key format
371  * ----------   ---------   ----------
372  * 0x00         5, 13, 29   Key data
373  * 0x01         5, 13, 29   Key data
374  * 0x04         16          16 bytes of key data
375  * 0x05         16          16 bytes of key data
376  * 0x0a         32          16 bytes of TKIP key data
377  *                          8 bytes of RX MIC key data
378  *                          8 bytes of TX MIC key data
379  * 0x0b         32          16 bytes of TKIP key data
380  *                          8 bytes of RX MIC key data
381  *                          8 bytes of TX MIC key data
382  *
383  */
384 
385 struct wl1251_cmd_set_keys {
386 	struct wl1251_cmd_header header;
387 
388 	/* Ignored for default WEP key */
389 	u8 addr[ETH_ALEN];
390 
391 	/* key_action_e */
392 	u16 key_action;
393 
394 	u16 reserved_1;
395 
396 	/* key size in bytes */
397 	u8 key_size;
398 
399 	/* key_type_e */
400 	u8 key_type;
401 	u8 ssid_profile;
402 
403 	/*
404 	 * TKIP, AES: frame's key id field.
405 	 * For WEP default key: key id;
406 	 */
407 	u8 id;
408 	u8 reserved_2[6];
409 	u8 key[MAX_KEY_SIZE];
410 	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
411 	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
412 } __packed;
413 
414 
415 #endif /* __WL1251_CMD_H__ */
416