1 /** 2 * Copyright (c) 2014 Redpine Signals Inc. 3 * 4 * Permission to use, copy, modify, and/or distribute this software for any 5 * purpose with or without fee is hereby granted, provided that the above 6 * copyright notice and this permission notice appear in all copies. 7 * 8 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 9 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 10 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 11 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 12 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 13 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 14 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 15 */ 16 17 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 18 19 #include <linux/module.h> 20 #include <linux/firmware.h> 21 #include <net/rsi_91x.h> 22 #include "rsi_mgmt.h" 23 #include "rsi_common.h" 24 #include "rsi_coex.h" 25 #include "rsi_hal.h" 26 27 u32 rsi_zone_enabled = /* INFO_ZONE | 28 INIT_ZONE | 29 MGMT_TX_ZONE | 30 MGMT_RX_ZONE | 31 DATA_TX_ZONE | 32 DATA_RX_ZONE | 33 FSM_ZONE | 34 ISR_ZONE | */ 35 ERR_ZONE | 36 0; 37 EXPORT_SYMBOL_GPL(rsi_zone_enabled); 38 39 #ifdef CONFIG_RSI_COEX 40 static struct rsi_proto_ops g_proto_ops = { 41 .coex_send_pkt = rsi_coex_send_pkt, 42 .get_host_intf = rsi_get_host_intf, 43 .set_bt_context = rsi_set_bt_context, 44 }; 45 #endif 46 47 /** 48 * rsi_dbg() - This function outputs informational messages. 49 * @zone: Zone of interest for output message. 50 * @fmt: printf-style format for output message. 51 * 52 * Return: none 53 */ 54 void rsi_dbg(u32 zone, const char *fmt, ...) 55 { 56 struct va_format vaf; 57 va_list args; 58 59 va_start(args, fmt); 60 61 vaf.fmt = fmt; 62 vaf.va = &args; 63 64 if (zone & rsi_zone_enabled) 65 pr_info("%pV", &vaf); 66 va_end(args); 67 } 68 EXPORT_SYMBOL_GPL(rsi_dbg); 69 70 static char *opmode_str(int oper_mode) 71 { 72 switch (oper_mode) { 73 case DEV_OPMODE_WIFI_ALONE: 74 return "Wi-Fi alone"; 75 case DEV_OPMODE_BT_ALONE: 76 return "BT EDR alone"; 77 case DEV_OPMODE_BT_LE_ALONE: 78 return "BT LE alone"; 79 case DEV_OPMODE_BT_DUAL: 80 return "BT Dual"; 81 case DEV_OPMODE_STA_BT: 82 return "Wi-Fi STA + BT EDR"; 83 case DEV_OPMODE_STA_BT_LE: 84 return "Wi-Fi STA + BT LE"; 85 case DEV_OPMODE_STA_BT_DUAL: 86 return "Wi-Fi STA + BT DUAL"; 87 case DEV_OPMODE_AP_BT: 88 return "Wi-Fi AP + BT EDR"; 89 case DEV_OPMODE_AP_BT_DUAL: 90 return "Wi-Fi AP + BT DUAL"; 91 } 92 93 return "Unknown"; 94 } 95 96 void rsi_print_version(struct rsi_common *common) 97 { 98 rsi_dbg(ERR_ZONE, "================================================\n"); 99 rsi_dbg(ERR_ZONE, "================ RSI Version Info ==============\n"); 100 rsi_dbg(ERR_ZONE, "================================================\n"); 101 rsi_dbg(ERR_ZONE, "FW Version\t: %d.%d.%d\n", 102 common->lmac_ver.major, common->lmac_ver.minor, 103 common->lmac_ver.release_num); 104 rsi_dbg(ERR_ZONE, "Operating mode\t: %d [%s]", 105 common->oper_mode, opmode_str(common->oper_mode)); 106 rsi_dbg(ERR_ZONE, "Firmware file\t: %s", common->priv->fw_file_name); 107 rsi_dbg(ERR_ZONE, "================================================\n"); 108 } 109 110 /** 111 * rsi_prepare_skb() - This function prepares the skb. 112 * @common: Pointer to the driver private structure. 113 * @buffer: Pointer to the packet data. 114 * @pkt_len: Length of the packet. 115 * @extended_desc: Extended descriptor. 116 * 117 * Return: Successfully skb. 118 */ 119 static struct sk_buff *rsi_prepare_skb(struct rsi_common *common, 120 u8 *buffer, 121 u32 pkt_len, 122 u8 extended_desc) 123 { 124 struct sk_buff *skb = NULL; 125 u8 payload_offset; 126 127 if (WARN(!pkt_len, "%s: Dummy pkt received", __func__)) 128 return NULL; 129 130 if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) { 131 rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n", 132 __func__, pkt_len); 133 pkt_len = RSI_RCV_BUFFER_LEN * 4; 134 } 135 136 pkt_len -= extended_desc; 137 skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ); 138 if (skb == NULL) 139 return NULL; 140 141 payload_offset = (extended_desc + FRAME_DESC_SZ); 142 skb_put(skb, pkt_len); 143 memcpy((skb->data), (buffer + payload_offset), skb->len); 144 145 return skb; 146 } 147 148 /** 149 * rsi_read_pkt() - This function reads frames from the card. 150 * @common: Pointer to the driver private structure. 151 * @rcv_pkt_len: Received pkt length. In case of USB it is 0. 152 * 153 * Return: 0 on success, -1 on failure. 154 */ 155 int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len) 156 { 157 u8 *frame_desc = NULL, extended_desc = 0; 158 u32 index, length = 0, queueno = 0; 159 u16 actual_length = 0, offset; 160 struct sk_buff *skb = NULL; 161 #ifdef CONFIG_RSI_COEX 162 u8 bt_pkt_type; 163 #endif 164 165 index = 0; 166 do { 167 frame_desc = &rx_pkt[index]; 168 actual_length = *(u16 *)&frame_desc[0]; 169 offset = *(u16 *)&frame_desc[2]; 170 171 queueno = rsi_get_queueno(frame_desc, offset); 172 length = rsi_get_length(frame_desc, offset); 173 174 /* Extended descriptor is valid for WLAN queues only */ 175 if (queueno == RSI_WIFI_DATA_Q || queueno == RSI_WIFI_MGMT_Q) 176 extended_desc = rsi_get_extended_desc(frame_desc, 177 offset); 178 179 switch (queueno) { 180 case RSI_COEX_Q: 181 #ifdef CONFIG_RSI_COEX 182 if (common->coex_mode > 1) 183 rsi_coex_recv_pkt(common, frame_desc + offset); 184 else 185 #endif 186 rsi_mgmt_pkt_recv(common, 187 (frame_desc + offset)); 188 break; 189 190 case RSI_WIFI_DATA_Q: 191 skb = rsi_prepare_skb(common, 192 (frame_desc + offset), 193 length, 194 extended_desc); 195 if (skb == NULL) 196 goto fail; 197 198 rsi_indicate_pkt_to_os(common, skb); 199 break; 200 201 case RSI_WIFI_MGMT_Q: 202 rsi_mgmt_pkt_recv(common, (frame_desc + offset)); 203 break; 204 205 #ifdef CONFIG_RSI_COEX 206 case RSI_BT_MGMT_Q: 207 case RSI_BT_DATA_Q: 208 #define BT_RX_PKT_TYPE_OFST 14 209 #define BT_CARD_READY_IND 0x89 210 bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST]; 211 if (bt_pkt_type == BT_CARD_READY_IND) { 212 rsi_dbg(INFO_ZONE, "BT Card ready recvd\n"); 213 if (rsi_bt_ops.attach(common, &g_proto_ops)) 214 rsi_dbg(ERR_ZONE, 215 "Failed to attach BT module\n"); 216 } else { 217 if (common->bt_adapter) 218 rsi_bt_ops.recv_pkt(common->bt_adapter, 219 frame_desc + offset); 220 } 221 break; 222 #endif 223 224 default: 225 rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n", 226 __func__, queueno); 227 goto fail; 228 } 229 230 index += actual_length; 231 rcv_pkt_len -= actual_length; 232 } while (rcv_pkt_len > 0); 233 234 return 0; 235 fail: 236 return -EINVAL; 237 } 238 EXPORT_SYMBOL_GPL(rsi_read_pkt); 239 240 /** 241 * rsi_tx_scheduler_thread() - This function is a kernel thread to send the 242 * packets to the device. 243 * @common: Pointer to the driver private structure. 244 * 245 * Return: None. 246 */ 247 static void rsi_tx_scheduler_thread(struct rsi_common *common) 248 { 249 struct rsi_hw *adapter = common->priv; 250 u32 timeout = EVENT_WAIT_FOREVER; 251 252 do { 253 if (adapter->determine_event_timeout) 254 timeout = adapter->determine_event_timeout(adapter); 255 rsi_wait_event(&common->tx_thread.event, timeout); 256 rsi_reset_event(&common->tx_thread.event); 257 258 if (common->init_done) 259 rsi_core_qos_processor(common); 260 } while (atomic_read(&common->tx_thread.thread_done) == 0); 261 complete_and_exit(&common->tx_thread.completion, 0); 262 } 263 264 #ifdef CONFIG_RSI_COEX 265 enum rsi_host_intf rsi_get_host_intf(void *priv) 266 { 267 struct rsi_common *common = (struct rsi_common *)priv; 268 269 return common->priv->rsi_host_intf; 270 } 271 272 void rsi_set_bt_context(void *priv, void *bt_context) 273 { 274 struct rsi_common *common = (struct rsi_common *)priv; 275 276 common->bt_adapter = bt_context; 277 } 278 #endif 279 280 /** 281 * rsi_91x_init() - This function initializes os interface operations. 282 * @void: Void. 283 * 284 * Return: Pointer to the adapter structure on success, NULL on failure . 285 */ 286 struct rsi_hw *rsi_91x_init(u16 oper_mode) 287 { 288 struct rsi_hw *adapter = NULL; 289 struct rsi_common *common = NULL; 290 u8 ii = 0; 291 292 adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); 293 if (!adapter) 294 return NULL; 295 296 adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL); 297 if (adapter->priv == NULL) { 298 rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n", 299 __func__); 300 kfree(adapter); 301 return NULL; 302 } else { 303 common = adapter->priv; 304 common->priv = adapter; 305 } 306 307 for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) 308 skb_queue_head_init(&common->tx_queue[ii]); 309 310 rsi_init_event(&common->tx_thread.event); 311 mutex_init(&common->mutex); 312 mutex_init(&common->tx_lock); 313 mutex_init(&common->rx_lock); 314 mutex_init(&common->tx_bus_mutex); 315 316 if (rsi_create_kthread(common, 317 &common->tx_thread, 318 rsi_tx_scheduler_thread, 319 "Tx-Thread")) { 320 rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__); 321 goto err; 322 } 323 324 rsi_default_ps_params(adapter); 325 init_bgscan_params(common); 326 spin_lock_init(&adapter->ps_lock); 327 timer_setup(&common->roc_timer, rsi_roc_timeout, 0); 328 init_completion(&common->wlan_init_completion); 329 adapter->device_model = RSI_DEV_9113; 330 common->oper_mode = oper_mode; 331 332 /* Determine coex mode */ 333 switch (common->oper_mode) { 334 case DEV_OPMODE_STA_BT_DUAL: 335 case DEV_OPMODE_STA_BT: 336 case DEV_OPMODE_STA_BT_LE: 337 case DEV_OPMODE_BT_ALONE: 338 case DEV_OPMODE_BT_LE_ALONE: 339 case DEV_OPMODE_BT_DUAL: 340 common->coex_mode = 2; 341 break; 342 case DEV_OPMODE_AP_BT_DUAL: 343 case DEV_OPMODE_AP_BT: 344 common->coex_mode = 4; 345 break; 346 case DEV_OPMODE_WIFI_ALONE: 347 common->coex_mode = 1; 348 break; 349 default: 350 common->oper_mode = 1; 351 common->coex_mode = 1; 352 } 353 rsi_dbg(INFO_ZONE, "%s: oper_mode = %d, coex_mode = %d\n", 354 __func__, common->oper_mode, common->coex_mode); 355 356 adapter->device_model = RSI_DEV_9113; 357 #ifdef CONFIG_RSI_COEX 358 if (common->coex_mode > 1) { 359 if (rsi_coex_attach(common)) { 360 rsi_dbg(ERR_ZONE, "Failed to init coex module\n"); 361 goto err; 362 } 363 } 364 #endif 365 366 common->init_done = true; 367 return adapter; 368 369 err: 370 kfree(common); 371 kfree(adapter); 372 return NULL; 373 } 374 EXPORT_SYMBOL_GPL(rsi_91x_init); 375 376 /** 377 * rsi_91x_deinit() - This function de-intializes os intf operations. 378 * @adapter: Pointer to the adapter structure. 379 * 380 * Return: None. 381 */ 382 void rsi_91x_deinit(struct rsi_hw *adapter) 383 { 384 struct rsi_common *common = adapter->priv; 385 u8 ii; 386 387 rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__); 388 389 rsi_kill_thread(&common->tx_thread); 390 391 for (ii = 0; ii < NUM_SOFT_QUEUES; ii++) 392 skb_queue_purge(&common->tx_queue[ii]); 393 394 #ifdef CONFIG_RSI_COEX 395 if (common->coex_mode > 1) { 396 if (common->bt_adapter) { 397 rsi_bt_ops.detach(common->bt_adapter); 398 common->bt_adapter = NULL; 399 } 400 rsi_coex_detach(common); 401 } 402 #endif 403 404 common->init_done = false; 405 406 kfree(common); 407 kfree(adapter->rsi_dev); 408 kfree(adapter); 409 } 410 EXPORT_SYMBOL_GPL(rsi_91x_deinit); 411 412 /** 413 * rsi_91x_hal_module_init() - This function is invoked when the module is 414 * loaded into the kernel. 415 * It registers the client driver. 416 * @void: Void. 417 * 418 * Return: 0 on success, -1 on failure. 419 */ 420 static int rsi_91x_hal_module_init(void) 421 { 422 rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__); 423 return 0; 424 } 425 426 /** 427 * rsi_91x_hal_module_exit() - This function is called at the time of 428 * removing/unloading the module. 429 * It unregisters the client driver. 430 * @void: Void. 431 * 432 * Return: None. 433 */ 434 static void rsi_91x_hal_module_exit(void) 435 { 436 rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__); 437 } 438 439 module_init(rsi_91x_hal_module_init); 440 module_exit(rsi_91x_hal_module_exit); 441 MODULE_AUTHOR("Redpine Signals Inc"); 442 MODULE_DESCRIPTION("Station driver for RSI 91x devices"); 443 MODULE_SUPPORTED_DEVICE("RSI-91x"); 444 MODULE_VERSION("0.1"); 445 MODULE_LICENSE("Dual BSD/GPL"); 446