1 /****************************************************************************** 2 * 3 * Copyright(c) 2009-2014 Realtek Corporation. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of version 2 of the GNU General Public License as 7 * published by the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * The full GNU General Public License is included in this distribution in the 15 * file called LICENSE. 16 * 17 * Contact Information: 18 * wlanfae <wlanfae@realtek.com> 19 * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, 20 * Hsinchu 300, Taiwan. 21 * 22 * Larry Finger <Larry.Finger@lwfinger.net> 23 * 24 *****************************************************************************/ 25 26 #include "../wifi.h" 27 #include "../core.h" 28 #include "../pci.h" 29 #include "reg.h" 30 #include "def.h" 31 #include "phy.h" 32 #include "../rtl8723com/phy_common.h" 33 #include "dm.h" 34 #include "../rtl8723com/dm_common.h" 35 #include "hw.h" 36 #include "fw.h" 37 #include "../rtl8723com/fw_common.h" 38 #include "sw.h" 39 #include "trx.h" 40 #include "led.h" 41 #include "table.h" 42 #include "../btcoexist/rtl_btc.h" 43 44 #include <linux/vmalloc.h> 45 #include <linux/module.h> 46 47 static void rtl8723be_init_aspm_vars(struct ieee80211_hw *hw) 48 { 49 struct rtl_priv *rtlpriv = rtl_priv(hw); 50 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 51 52 /*close ASPM for AMD defaultly */ 53 rtlpci->const_amdpci_aspm = 0; 54 55 /* ASPM PS mode. 56 * 0 - Disable ASPM, 57 * 1 - Enable ASPM without Clock Req, 58 * 2 - Enable ASPM with Clock Req, 59 * 3 - Alwyas Enable ASPM with Clock Req, 60 * 4 - Always Enable ASPM without Clock Req. 61 * set defult to RTL8192CE:3 RTL8192E:2 62 */ 63 rtlpci->const_pci_aspm = 3; 64 65 /*Setting for PCI-E device */ 66 rtlpci->const_devicepci_aspm_setting = 0x03; 67 68 /*Setting for PCI-E bridge */ 69 rtlpci->const_hostpci_aspm_setting = 0x02; 70 71 /* In Hw/Sw Radio Off situation. 72 * 0 - Default, 73 * 1 - From ASPM setting without low Mac Pwr, 74 * 2 - From ASPM setting with low Mac Pwr, 75 * 3 - Bus D3 76 * set default to RTL8192CE:0 RTL8192SE:2 77 */ 78 rtlpci->const_hwsw_rfoff_d3 = 0; 79 80 /* This setting works for those device with 81 * backdoor ASPM setting such as EPHY setting. 82 * 0 - Not support ASPM, 83 * 1 - Support ASPM, 84 * 2 - According to chipset. 85 */ 86 rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support; 87 } 88 89 int rtl8723be_init_sw_vars(struct ieee80211_hw *hw) 90 { 91 int err = 0; 92 struct rtl_priv *rtlpriv = rtl_priv(hw); 93 struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); 94 struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); 95 char *fw_name = "rtlwifi/rtl8723befw_36.bin"; 96 97 rtl8723be_bt_reg_init(hw); 98 rtlpriv->btcoexist.btc_ops = rtl_btc_get_ops_pointer(); 99 100 rtlpriv->dm.dm_initialgain_enable = 1; 101 rtlpriv->dm.dm_flag = 0; 102 rtlpriv->dm.disable_framebursting = 0; 103 rtlpriv->dm.thermalvalue = 0; 104 rtlpci->transmit_config = CFENDFORM | BIT(15) | BIT(24) | BIT(25); 105 106 rtlpriv->phy.lck_inprogress = false; 107 108 mac->ht_enable = true; 109 110 /* compatible 5G band 88ce just 2.4G band & smsp */ 111 rtlpriv->rtlhal.current_bandtype = BAND_ON_2_4G; 112 rtlpriv->rtlhal.bandset = BAND_ON_2_4G; 113 rtlpriv->rtlhal.macphymode = SINGLEMAC_SINGLEPHY; 114 115 rtlpci->receive_config = (RCR_APPFCS | 116 RCR_APP_MIC | 117 RCR_APP_ICV | 118 RCR_APP_PHYST_RXFF | 119 RCR_HTC_LOC_CTRL | 120 RCR_AMF | 121 RCR_ACF | 122 RCR_ADF | 123 RCR_AICV | 124 RCR_AB | 125 RCR_AM | 126 RCR_APM | 127 0); 128 129 rtlpci->irq_mask[0] = (u32) (IMR_PSTIMEOUT | 130 IMR_HSISR_IND_ON_INT | 131 IMR_C2HCMD | 132 IMR_HIGHDOK | 133 IMR_MGNTDOK | 134 IMR_BKDOK | 135 IMR_BEDOK | 136 IMR_VIDOK | 137 IMR_VODOK | 138 IMR_RDU | 139 IMR_ROK | 140 0); 141 142 rtlpci->irq_mask[1] = (u32)(IMR_RXFOVW | 0); 143 144 rtlpci->sys_irq_mask = (u32)(HSIMR_PDN_INT_EN | 145 HSIMR_RON_INT_EN | 146 0); 147 148 /* for LPS & IPS */ 149 rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps; 150 rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps; 151 rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps; 152 rtlpci->msi_support = rtlpriv->cfg->mod_params->msi_support; 153 rtlpriv->cfg->mod_params->sw_crypto = 154 rtlpriv->cfg->mod_params->sw_crypto; 155 rtlpriv->cfg->mod_params->disable_watchdog = 156 rtlpriv->cfg->mod_params->disable_watchdog; 157 if (rtlpriv->cfg->mod_params->disable_watchdog) 158 pr_info("watchdog disabled\n"); 159 rtlpriv->psc.reg_fwctrl_lps = 2; 160 rtlpriv->psc.reg_max_lps_awakeintvl = 2; 161 /* for ASPM, you can close aspm through 162 * set const_support_pciaspm = 0 163 */ 164 rtl8723be_init_aspm_vars(hw); 165 166 if (rtlpriv->psc.reg_fwctrl_lps == 1) 167 rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE; 168 else if (rtlpriv->psc.reg_fwctrl_lps == 2) 169 rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE; 170 else if (rtlpriv->psc.reg_fwctrl_lps == 3) 171 rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE; 172 173 /*low power: Disable 32k */ 174 rtlpriv->psc.low_power_enable = false; 175 176 rtlpriv->rtlhal.earlymode_enable = false; 177 178 /* for firmware buf */ 179 rtlpriv->rtlhal.pfirmware = vzalloc(0x8000); 180 if (!rtlpriv->rtlhal.pfirmware) { 181 pr_err("Can't alloc buffer for fw.\n"); 182 return 1; 183 } 184 185 rtlpriv->max_fw_size = 0x8000; 186 pr_info("Using firmware %s\n", fw_name); 187 err = request_firmware_nowait(THIS_MODULE, 1, fw_name, 188 rtlpriv->io.dev, GFP_KERNEL, hw, 189 rtl_fw_cb); 190 if (err) { 191 pr_err("Failed to request firmware!\n"); 192 vfree(rtlpriv->rtlhal.pfirmware); 193 rtlpriv->rtlhal.pfirmware = NULL; 194 return 1; 195 } 196 return 0; 197 } 198 199 void rtl8723be_deinit_sw_vars(struct ieee80211_hw *hw) 200 { 201 struct rtl_priv *rtlpriv = rtl_priv(hw); 202 203 if (rtlpriv->rtlhal.pfirmware) { 204 vfree(rtlpriv->rtlhal.pfirmware); 205 rtlpriv->rtlhal.pfirmware = NULL; 206 } 207 } 208 209 /* get bt coexist status */ 210 bool rtl8723be_get_btc_status(void) 211 { 212 return true; 213 } 214 215 static bool is_fw_header(struct rtlwifi_firmware_header *hdr) 216 { 217 return (le16_to_cpu(hdr->signature) & 0xfff0) == 0x5300; 218 } 219 220 static struct rtl_hal_ops rtl8723be_hal_ops = { 221 .init_sw_vars = rtl8723be_init_sw_vars, 222 .deinit_sw_vars = rtl8723be_deinit_sw_vars, 223 .read_eeprom_info = rtl8723be_read_eeprom_info, 224 .interrupt_recognized = rtl8723be_interrupt_recognized, 225 .hw_init = rtl8723be_hw_init, 226 .hw_disable = rtl8723be_card_disable, 227 .hw_suspend = rtl8723be_suspend, 228 .hw_resume = rtl8723be_resume, 229 .enable_interrupt = rtl8723be_enable_interrupt, 230 .disable_interrupt = rtl8723be_disable_interrupt, 231 .set_network_type = rtl8723be_set_network_type, 232 .set_chk_bssid = rtl8723be_set_check_bssid, 233 .set_qos = rtl8723be_set_qos, 234 .set_bcn_reg = rtl8723be_set_beacon_related_registers, 235 .set_bcn_intv = rtl8723be_set_beacon_interval, 236 .update_interrupt_mask = rtl8723be_update_interrupt_mask, 237 .get_hw_reg = rtl8723be_get_hw_reg, 238 .set_hw_reg = rtl8723be_set_hw_reg, 239 .update_rate_tbl = rtl8723be_update_hal_rate_tbl, 240 .fill_tx_desc = rtl8723be_tx_fill_desc, 241 .fill_tx_cmddesc = rtl8723be_tx_fill_cmddesc, 242 .query_rx_desc = rtl8723be_rx_query_desc, 243 .set_channel_access = rtl8723be_update_channel_access_setting, 244 .radio_onoff_checking = rtl8723be_gpio_radio_on_off_checking, 245 .set_bw_mode = rtl8723be_phy_set_bw_mode, 246 .switch_channel = rtl8723be_phy_sw_chnl, 247 .dm_watchdog = rtl8723be_dm_watchdog, 248 .scan_operation_backup = rtl8723be_phy_scan_operation_backup, 249 .set_rf_power_state = rtl8723be_phy_set_rf_power_state, 250 .led_control = rtl8723be_led_control, 251 .set_desc = rtl8723be_set_desc, 252 .get_desc = rtl8723be_get_desc, 253 .is_tx_desc_closed = rtl8723be_is_tx_desc_closed, 254 .tx_polling = rtl8723be_tx_polling, 255 .enable_hw_sec = rtl8723be_enable_hw_security_config, 256 .set_key = rtl8723be_set_key, 257 .init_sw_leds = rtl8723be_init_sw_leds, 258 .get_bbreg = rtl8723_phy_query_bb_reg, 259 .set_bbreg = rtl8723_phy_set_bb_reg, 260 .get_rfreg = rtl8723be_phy_query_rf_reg, 261 .set_rfreg = rtl8723be_phy_set_rf_reg, 262 .fill_h2c_cmd = rtl8723be_fill_h2c_cmd, 263 .get_btc_status = rtl8723be_get_btc_status, 264 .rx_command_packet = rtl8723be_rx_command_packet, 265 .is_fw_header = is_fw_header, 266 .c2h_content_parsing = rtl8723be_c2h_content_parsing, 267 }; 268 269 static struct rtl_mod_params rtl8723be_mod_params = { 270 .sw_crypto = false, 271 .inactiveps = true, 272 .swctrl_lps = false, 273 .fwctrl_lps = true, 274 .msi_support = false, 275 .aspm_support = 1, 276 .disable_watchdog = false, 277 .debug_level = 0, 278 .debug_mask = 0, 279 .ant_sel = 0, 280 }; 281 282 static const struct rtl_hal_cfg rtl8723be_hal_cfg = { 283 .bar_id = 2, 284 .write_readback = true, 285 .name = "rtl8723be_pci", 286 .alt_fw_name = "rtlwifi/rtl8723befw.bin", 287 .ops = &rtl8723be_hal_ops, 288 .mod_params = &rtl8723be_mod_params, 289 .maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL, 290 .maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN, 291 .maps[SYS_CLK] = REG_SYS_CLKR, 292 .maps[MAC_RCR_AM] = AM, 293 .maps[MAC_RCR_AB] = AB, 294 .maps[MAC_RCR_ACRC32] = ACRC32, 295 .maps[MAC_RCR_ACF] = ACF, 296 .maps[MAC_RCR_AAP] = AAP, 297 .maps[MAC_HIMR] = REG_HIMR, 298 .maps[MAC_HIMRE] = REG_HIMRE, 299 .maps[MAC_HSISR] = REG_HSISR, 300 301 .maps[EFUSE_ACCESS] = REG_EFUSE_ACCESS, 302 303 .maps[EFUSE_TEST] = REG_EFUSE_TEST, 304 .maps[EFUSE_CTRL] = REG_EFUSE_CTRL, 305 .maps[EFUSE_CLK] = 0, 306 .maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL, 307 .maps[EFUSE_PWC_EV12V] = PWC_EV12V, 308 .maps[EFUSE_FEN_ELDR] = FEN_ELDR, 309 .maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN, 310 .maps[EFUSE_ANA8M] = ANA8M, 311 .maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE, 312 .maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION, 313 .maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN, 314 .maps[EFUSE_OOB_PROTECT_BYTES_LEN] = EFUSE_OOB_PROTECT_BYTES, 315 316 .maps[RWCAM] = REG_CAMCMD, 317 .maps[WCAMI] = REG_CAMWRITE, 318 .maps[RCAMO] = REG_CAMREAD, 319 .maps[CAMDBG] = REG_CAMDBG, 320 .maps[SECR] = REG_SECCFG, 321 .maps[SEC_CAM_NONE] = CAM_NONE, 322 .maps[SEC_CAM_WEP40] = CAM_WEP40, 323 .maps[SEC_CAM_TKIP] = CAM_TKIP, 324 .maps[SEC_CAM_AES] = CAM_AES, 325 .maps[SEC_CAM_WEP104] = CAM_WEP104, 326 327 .maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6, 328 .maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5, 329 .maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4, 330 .maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3, 331 .maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2, 332 .maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1, 333 /* .maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8, */ /*need check*/ 334 .maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7, 335 .maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6, 336 .maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5, 337 .maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4, 338 .maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3, 339 .maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2, 340 .maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1, 341 /* .maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,*/ 342 /* .maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,*/ 343 344 .maps[RTL_IMR_TXFOVW] = IMR_TXFOVW, 345 .maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT, 346 .maps[RTL_IMR_BCNINT] = IMR_BCNDMAINT0, 347 .maps[RTL_IMR_RXFOVW] = IMR_RXFOVW, 348 .maps[RTL_IMR_RDU] = IMR_RDU, 349 .maps[RTL_IMR_ATIMEND] = IMR_ATIMEND, 350 .maps[RTL_IMR_BDOK] = IMR_BCNDOK0, 351 .maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK, 352 .maps[RTL_IMR_TBDER] = IMR_TBDER, 353 .maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK, 354 .maps[RTL_IMR_TBDOK] = IMR_TBDOK, 355 .maps[RTL_IMR_BKDOK] = IMR_BKDOK, 356 .maps[RTL_IMR_BEDOK] = IMR_BEDOK, 357 .maps[RTL_IMR_VIDOK] = IMR_VIDOK, 358 .maps[RTL_IMR_VODOK] = IMR_VODOK, 359 .maps[RTL_IMR_ROK] = IMR_ROK, 360 .maps[RTL_IMR_HSISR_IND] = IMR_HSISR_IND_ON_INT, 361 .maps[RTL_IBSS_INT_MASKS] = (IMR_BCNDMAINT0 | IMR_TBDOK | IMR_TBDER), 362 363 .maps[RTL_RC_CCK_RATE1M] = DESC92C_RATE1M, 364 .maps[RTL_RC_CCK_RATE2M] = DESC92C_RATE2M, 365 .maps[RTL_RC_CCK_RATE5_5M] = DESC92C_RATE5_5M, 366 .maps[RTL_RC_CCK_RATE11M] = DESC92C_RATE11M, 367 .maps[RTL_RC_OFDM_RATE6M] = DESC92C_RATE6M, 368 .maps[RTL_RC_OFDM_RATE9M] = DESC92C_RATE9M, 369 .maps[RTL_RC_OFDM_RATE12M] = DESC92C_RATE12M, 370 .maps[RTL_RC_OFDM_RATE18M] = DESC92C_RATE18M, 371 .maps[RTL_RC_OFDM_RATE24M] = DESC92C_RATE24M, 372 .maps[RTL_RC_OFDM_RATE36M] = DESC92C_RATE36M, 373 .maps[RTL_RC_OFDM_RATE48M] = DESC92C_RATE48M, 374 .maps[RTL_RC_OFDM_RATE54M] = DESC92C_RATE54M, 375 376 .maps[RTL_RC_HT_RATEMCS7] = DESC92C_RATEMCS7, 377 .maps[RTL_RC_HT_RATEMCS15] = DESC92C_RATEMCS15, 378 }; 379 380 static const struct pci_device_id rtl8723be_pci_ids[] = { 381 {RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0xB723, rtl8723be_hal_cfg)}, 382 {}, 383 }; 384 385 MODULE_DEVICE_TABLE(pci, rtl8723be_pci_ids); 386 387 MODULE_AUTHOR("PageHe <page_he@realsil.com.cn>"); 388 MODULE_AUTHOR("Realtek WlanFAE <wlanfae@realtek.com>"); 389 MODULE_LICENSE("GPL"); 390 MODULE_DESCRIPTION("Realtek 8723BE 802.11n PCI wireless"); 391 MODULE_FIRMWARE("rtlwifi/rtl8723befw.bin"); 392 MODULE_FIRMWARE("rtlwifi/rtl8723befw_36.bin"); 393 394 module_param_named(swenc, rtl8723be_mod_params.sw_crypto, bool, 0444); 395 module_param_named(debug_level, rtl8723be_mod_params.debug_level, int, 0644); 396 module_param_named(debug_mask, rtl8723be_mod_params.debug_mask, ullong, 0644); 397 module_param_named(ips, rtl8723be_mod_params.inactiveps, bool, 0444); 398 module_param_named(swlps, rtl8723be_mod_params.swctrl_lps, bool, 0444); 399 module_param_named(fwlps, rtl8723be_mod_params.fwctrl_lps, bool, 0444); 400 module_param_named(msi, rtl8723be_mod_params.msi_support, bool, 0444); 401 module_param_named(aspm, rtl8723be_mod_params.aspm_support, int, 0444); 402 module_param_named(disable_watchdog, rtl8723be_mod_params.disable_watchdog, 403 bool, 0444); 404 module_param_named(ant_sel, rtl8723be_mod_params.ant_sel, int, 0444); 405 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n"); 406 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n"); 407 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 0)\n"); 408 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 1)\n"); 409 MODULE_PARM_DESC(msi, "Set to 1 to use MSI interrupts mode (default 0)\n"); 410 MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n"); 411 MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)"); 412 MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)"); 413 MODULE_PARM_DESC(disable_watchdog, 414 "Set to 1 to disable the watchdog (default 0)\n"); 415 MODULE_PARM_DESC(ant_sel, "Set to 1 or 2 to force antenna number (default 0)\n"); 416 417 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume); 418 419 static struct pci_driver rtl8723be_driver = { 420 .name = KBUILD_MODNAME, 421 .id_table = rtl8723be_pci_ids, 422 .probe = rtl_pci_probe, 423 .remove = rtl_pci_disconnect, 424 .driver.pm = &rtlwifi_pm_ops, 425 }; 426 427 module_pci_driver(rtl8723be_driver); 428