1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright(c) 2009-2012  Realtek Corporation.*/
3 
4 #include "../wifi.h"
5 #include "../pci.h"
6 #include "reg.h"
7 #include "led.h"
8 
9 static void _rtl92ce_init_led(struct ieee80211_hw *hw,
10 			      struct rtl_led *pled, enum rtl_led_pin ledpin)
11 {
12 	pled->hw = hw;
13 	pled->ledpin = ledpin;
14 	pled->ledon = false;
15 }
16 
17 void rtl92de_sw_led_on(struct ieee80211_hw *hw, struct rtl_led *pled)
18 {
19 	u8 ledcfg;
20 	struct rtl_priv *rtlpriv = rtl_priv(hw);
21 
22 	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
23 		REG_LEDCFG2, pled->ledpin);
24 
25 	switch (pled->ledpin) {
26 	case LED_PIN_GPIO0:
27 		break;
28 	case LED_PIN_LED0:
29 		ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
30 
31 		if ((rtlpriv->efuse.eeprom_did == 0x8176) ||
32 			(rtlpriv->efuse.eeprom_did == 0x8193))
33 			/* BIT7 of REG_LEDCFG2 should be set to
34 			 * make sure we could emit the led2. */
35 			rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) |
36 				       BIT(7) | BIT(5) | BIT(6));
37 		else
38 			rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0xf0) |
39 				       BIT(7) | BIT(5));
40 		break;
41 	case LED_PIN_LED1:
42 		ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG1);
43 
44 		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg & 0x0f) | BIT(5));
45 		break;
46 	default:
47 		pr_err("switch case %#x not processed\n",
48 		       pled->ledpin);
49 		break;
50 	}
51 	pled->ledon = true;
52 }
53 
54 void rtl92de_sw_led_off(struct ieee80211_hw *hw, struct rtl_led *pled)
55 {
56 	struct rtl_priv *rtlpriv = rtl_priv(hw);
57 	u8 ledcfg;
58 
59 	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "LedAddr:%X ledpin=%d\n",
60 		REG_LEDCFG2, pled->ledpin);
61 
62 	ledcfg = rtl_read_byte(rtlpriv, REG_LEDCFG2);
63 
64 	switch (pled->ledpin) {
65 	case LED_PIN_GPIO0:
66 		break;
67 	case LED_PIN_LED0:
68 		ledcfg &= 0xf0;
69 		if (rtlpriv->ledctl.led_opendrain)
70 			rtl_write_byte(rtlpriv, REG_LEDCFG2,
71 				       (ledcfg | BIT(1) | BIT(5) | BIT(6)));
72 		else
73 			rtl_write_byte(rtlpriv, REG_LEDCFG2,
74 				       (ledcfg | BIT(3) | BIT(5) | BIT(6)));
75 		break;
76 	case LED_PIN_LED1:
77 		ledcfg &= 0x0f;
78 		rtl_write_byte(rtlpriv, REG_LEDCFG2, (ledcfg | BIT(3)));
79 		break;
80 	default:
81 		pr_err("switch case %#x not processed\n",
82 		       pled->ledpin);
83 		break;
84 	}
85 	pled->ledon = false;
86 }
87 
88 void rtl92de_init_sw_leds(struct ieee80211_hw *hw)
89 {
90 	struct rtl_priv *rtlpriv = rtl_priv(hw);
91 
92 	_rtl92ce_init_led(hw, &rtlpriv->ledctl.sw_led0, LED_PIN_LED0);
93 	_rtl92ce_init_led(hw, &rtlpriv->ledctl.sw_led1, LED_PIN_LED1);
94 }
95 
96 static void _rtl92ce_sw_led_control(struct ieee80211_hw *hw,
97 				    enum led_ctl_mode ledaction)
98 {
99 	struct rtl_priv *rtlpriv = rtl_priv(hw);
100 	struct rtl_led *pled0 = &rtlpriv->ledctl.sw_led0;
101 
102 	switch (ledaction) {
103 	case LED_CTL_POWER_ON:
104 	case LED_CTL_LINK:
105 	case LED_CTL_NO_LINK:
106 		rtl92de_sw_led_on(hw, pled0);
107 		break;
108 	case LED_CTL_POWER_OFF:
109 		rtl92de_sw_led_off(hw, pled0);
110 		break;
111 	default:
112 		break;
113 	}
114 }
115 
116 void rtl92de_led_control(struct ieee80211_hw *hw, enum led_ctl_mode ledaction)
117 {
118 	struct rtl_priv *rtlpriv = rtl_priv(hw);
119 	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
120 
121 	if ((ppsc->rfoff_reason > RF_CHANGE_BY_PS) &&
122 	    (ledaction == LED_CTL_TX ||
123 	     ledaction == LED_CTL_RX ||
124 	     ledaction == LED_CTL_SITE_SURVEY ||
125 	     ledaction == LED_CTL_LINK ||
126 	     ledaction == LED_CTL_NO_LINK ||
127 	     ledaction == LED_CTL_START_TO_LINK ||
128 	     ledaction == LED_CTL_POWER_ON)) {
129 		return;
130 	}
131 	rtl_dbg(rtlpriv, COMP_LED, DBG_LOUD, "ledaction %d,\n", ledaction);
132 
133 	_rtl92ce_sw_led_control(hw, ledaction);
134 }
135