1 /* 2 * RTL8XXXU mac80211 USB driver - 8723b specific subdriver 3 * 4 * Copyright (c) 2014 - 2017 Jes Sorensen <Jes.Sorensen@gmail.com> 5 * 6 * Portions, notably calibration code: 7 * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved. 8 * 9 * This driver was written as a replacement for the vendor provided 10 * rtl8723au driver. As the Realtek 8xxx chips are very similar in 11 * their programming interface, I have started adding support for 12 * additional 8xxx chips like the 8192cu, 8188cus, etc. 13 * 14 * This program is free software; you can redistribute it and/or modify it 15 * under the terms of version 2 of the GNU General Public License as 16 * published by the Free Software Foundation. 17 * 18 * This program is distributed in the hope that it will be useful, but WITHOUT 19 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 20 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 21 * more details. 22 */ 23 24 #include <linux/init.h> 25 #include <linux/kernel.h> 26 #include <linux/sched.h> 27 #include <linux/errno.h> 28 #include <linux/slab.h> 29 #include <linux/module.h> 30 #include <linux/spinlock.h> 31 #include <linux/list.h> 32 #include <linux/usb.h> 33 #include <linux/netdevice.h> 34 #include <linux/etherdevice.h> 35 #include <linux/ethtool.h> 36 #include <linux/wireless.h> 37 #include <linux/firmware.h> 38 #include <linux/moduleparam.h> 39 #include <net/mac80211.h> 40 #include "rtl8xxxu.h" 41 #include "rtl8xxxu_regs.h" 42 43 static struct rtl8xxxu_reg8val rtl8723b_mac_init_table[] = { 44 {0x02f, 0x30}, {0x035, 0x00}, {0x039, 0x08}, {0x04e, 0xe0}, 45 {0x064, 0x00}, {0x067, 0x20}, {0x428, 0x0a}, {0x429, 0x10}, 46 {0x430, 0x00}, {0x431, 0x00}, 47 {0x432, 0x00}, {0x433, 0x01}, {0x434, 0x04}, {0x435, 0x05}, 48 {0x436, 0x07}, {0x437, 0x08}, {0x43c, 0x04}, {0x43d, 0x05}, 49 {0x43e, 0x07}, {0x43f, 0x08}, {0x440, 0x5d}, {0x441, 0x01}, 50 {0x442, 0x00}, {0x444, 0x10}, {0x445, 0x00}, {0x446, 0x00}, 51 {0x447, 0x00}, {0x448, 0x00}, {0x449, 0xf0}, {0x44a, 0x0f}, 52 {0x44b, 0x3e}, {0x44c, 0x10}, {0x44d, 0x00}, {0x44e, 0x00}, 53 {0x44f, 0x00}, {0x450, 0x00}, {0x451, 0xf0}, {0x452, 0x0f}, 54 {0x453, 0x00}, {0x456, 0x5e}, {0x460, 0x66}, {0x461, 0x66}, 55 {0x4c8, 0xff}, {0x4c9, 0x08}, {0x4cc, 0xff}, 56 {0x4cd, 0xff}, {0x4ce, 0x01}, {0x500, 0x26}, {0x501, 0xa2}, 57 {0x502, 0x2f}, {0x503, 0x00}, {0x504, 0x28}, {0x505, 0xa3}, 58 {0x506, 0x5e}, {0x507, 0x00}, {0x508, 0x2b}, {0x509, 0xa4}, 59 {0x50a, 0x5e}, {0x50b, 0x00}, {0x50c, 0x4f}, {0x50d, 0xa4}, 60 {0x50e, 0x00}, {0x50f, 0x00}, {0x512, 0x1c}, {0x514, 0x0a}, 61 {0x516, 0x0a}, {0x525, 0x4f}, 62 {0x550, 0x10}, {0x551, 0x10}, {0x559, 0x02}, {0x55c, 0x50}, 63 {0x55d, 0xff}, {0x605, 0x30}, {0x608, 0x0e}, {0x609, 0x2a}, 64 {0x620, 0xff}, {0x621, 0xff}, {0x622, 0xff}, {0x623, 0xff}, 65 {0x624, 0xff}, {0x625, 0xff}, {0x626, 0xff}, {0x627, 0xff}, 66 {0x638, 0x50}, {0x63c, 0x0a}, {0x63d, 0x0a}, {0x63e, 0x0e}, 67 {0x63f, 0x0e}, {0x640, 0x40}, {0x642, 0x40}, {0x643, 0x00}, 68 {0x652, 0xc8}, {0x66e, 0x05}, {0x700, 0x21}, {0x701, 0x43}, 69 {0x702, 0x65}, {0x703, 0x87}, {0x708, 0x21}, {0x709, 0x43}, 70 {0x70a, 0x65}, {0x70b, 0x87}, {0x765, 0x18}, {0x76e, 0x04}, 71 {0xffff, 0xff}, 72 }; 73 74 static struct rtl8xxxu_reg32val rtl8723b_phy_1t_init_table[] = { 75 {0x800, 0x80040000}, {0x804, 0x00000003}, 76 {0x808, 0x0000fc00}, {0x80c, 0x0000000a}, 77 {0x810, 0x10001331}, {0x814, 0x020c3d10}, 78 {0x818, 0x02200385}, {0x81c, 0x00000000}, 79 {0x820, 0x01000100}, {0x824, 0x00190204}, 80 {0x828, 0x00000000}, {0x82c, 0x00000000}, 81 {0x830, 0x00000000}, {0x834, 0x00000000}, 82 {0x838, 0x00000000}, {0x83c, 0x00000000}, 83 {0x840, 0x00010000}, {0x844, 0x00000000}, 84 {0x848, 0x00000000}, {0x84c, 0x00000000}, 85 {0x850, 0x00000000}, {0x854, 0x00000000}, 86 {0x858, 0x569a11a9}, {0x85c, 0x01000014}, 87 {0x860, 0x66f60110}, {0x864, 0x061f0649}, 88 {0x868, 0x00000000}, {0x86c, 0x27272700}, 89 {0x870, 0x07000760}, {0x874, 0x25004000}, 90 {0x878, 0x00000808}, {0x87c, 0x00000000}, 91 {0x880, 0xb0000c1c}, {0x884, 0x00000001}, 92 {0x888, 0x00000000}, {0x88c, 0xccc000c0}, 93 {0x890, 0x00000800}, {0x894, 0xfffffffe}, 94 {0x898, 0x40302010}, {0x89c, 0x00706050}, 95 {0x900, 0x00000000}, {0x904, 0x00000023}, 96 {0x908, 0x00000000}, {0x90c, 0x81121111}, 97 {0x910, 0x00000002}, {0x914, 0x00000201}, 98 {0xa00, 0x00d047c8}, {0xa04, 0x80ff800c}, 99 {0xa08, 0x8c838300}, {0xa0c, 0x2e7f120f}, 100 {0xa10, 0x9500bb78}, {0xa14, 0x1114d028}, 101 {0xa18, 0x00881117}, {0xa1c, 0x89140f00}, 102 {0xa20, 0x1a1b0000}, {0xa24, 0x090e1317}, 103 {0xa28, 0x00000204}, {0xa2c, 0x00d30000}, 104 {0xa70, 0x101fbf00}, {0xa74, 0x00000007}, 105 {0xa78, 0x00000900}, {0xa7c, 0x225b0606}, 106 {0xa80, 0x21806490}, {0xb2c, 0x00000000}, 107 {0xc00, 0x48071d40}, {0xc04, 0x03a05611}, 108 {0xc08, 0x000000e4}, {0xc0c, 0x6c6c6c6c}, 109 {0xc10, 0x08800000}, {0xc14, 0x40000100}, 110 {0xc18, 0x08800000}, {0xc1c, 0x40000100}, 111 {0xc20, 0x00000000}, {0xc24, 0x00000000}, 112 {0xc28, 0x00000000}, {0xc2c, 0x00000000}, 113 {0xc30, 0x69e9ac44}, {0xc34, 0x469652af}, 114 {0xc38, 0x49795994}, {0xc3c, 0x0a97971c}, 115 {0xc40, 0x1f7c403f}, {0xc44, 0x000100b7}, 116 {0xc48, 0xec020107}, {0xc4c, 0x007f037f}, 117 {0xc50, 0x69553420}, {0xc54, 0x43bc0094}, 118 {0xc58, 0x00013149}, {0xc5c, 0x00250492}, 119 {0xc60, 0x00000000}, {0xc64, 0x7112848b}, 120 {0xc68, 0x47c00bff}, {0xc6c, 0x00000036}, 121 {0xc70, 0x2c7f000d}, {0xc74, 0x020610db}, 122 {0xc78, 0x0000001f}, {0xc7c, 0x00b91612}, 123 {0xc80, 0x390000e4}, {0xc84, 0x20f60000}, 124 {0xc88, 0x40000100}, {0xc8c, 0x20200000}, 125 {0xc90, 0x00020e1a}, {0xc94, 0x00000000}, 126 {0xc98, 0x00020e1a}, {0xc9c, 0x00007f7f}, 127 {0xca0, 0x00000000}, {0xca4, 0x000300a0}, 128 {0xca8, 0x00000000}, {0xcac, 0x00000000}, 129 {0xcb0, 0x00000000}, {0xcb4, 0x00000000}, 130 {0xcb8, 0x00000000}, {0xcbc, 0x28000000}, 131 {0xcc0, 0x00000000}, {0xcc4, 0x00000000}, 132 {0xcc8, 0x00000000}, {0xccc, 0x00000000}, 133 {0xcd0, 0x00000000}, {0xcd4, 0x00000000}, 134 {0xcd8, 0x64b22427}, {0xcdc, 0x00766932}, 135 {0xce0, 0x00222222}, {0xce4, 0x00000000}, 136 {0xce8, 0x37644302}, {0xcec, 0x2f97d40c}, 137 {0xd00, 0x00000740}, {0xd04, 0x40020401}, 138 {0xd08, 0x0000907f}, {0xd0c, 0x20010201}, 139 {0xd10, 0xa0633333}, {0xd14, 0x3333bc53}, 140 {0xd18, 0x7a8f5b6f}, {0xd2c, 0xcc979975}, 141 {0xd30, 0x00000000}, {0xd34, 0x80608000}, 142 {0xd38, 0x00000000}, {0xd3c, 0x00127353}, 143 {0xd40, 0x00000000}, {0xd44, 0x00000000}, 144 {0xd48, 0x00000000}, {0xd4c, 0x00000000}, 145 {0xd50, 0x6437140a}, {0xd54, 0x00000000}, 146 {0xd58, 0x00000282}, {0xd5c, 0x30032064}, 147 {0xd60, 0x4653de68}, {0xd64, 0x04518a3c}, 148 {0xd68, 0x00002101}, {0xd6c, 0x2a201c16}, 149 {0xd70, 0x1812362e}, {0xd74, 0x322c2220}, 150 {0xd78, 0x000e3c24}, {0xe00, 0x2d2d2d2d}, 151 {0xe04, 0x2d2d2d2d}, {0xe08, 0x0390272d}, 152 {0xe10, 0x2d2d2d2d}, {0xe14, 0x2d2d2d2d}, 153 {0xe18, 0x2d2d2d2d}, {0xe1c, 0x2d2d2d2d}, 154 {0xe28, 0x00000000}, {0xe30, 0x1000dc1f}, 155 {0xe34, 0x10008c1f}, {0xe38, 0x02140102}, 156 {0xe3c, 0x681604c2}, {0xe40, 0x01007c00}, 157 {0xe44, 0x01004800}, {0xe48, 0xfb000000}, 158 {0xe4c, 0x000028d1}, {0xe50, 0x1000dc1f}, 159 {0xe54, 0x10008c1f}, {0xe58, 0x02140102}, 160 {0xe5c, 0x28160d05}, {0xe60, 0x00000008}, 161 {0xe68, 0x001b2556}, {0xe6c, 0x00c00096}, 162 {0xe70, 0x00c00096}, {0xe74, 0x01000056}, 163 {0xe78, 0x01000014}, {0xe7c, 0x01000056}, 164 {0xe80, 0x01000014}, {0xe84, 0x00c00096}, 165 {0xe88, 0x01000056}, {0xe8c, 0x00c00096}, 166 {0xed0, 0x00c00096}, {0xed4, 0x00c00096}, 167 {0xed8, 0x00c00096}, {0xedc, 0x000000d6}, 168 {0xee0, 0x000000d6}, {0xeec, 0x01c00016}, 169 {0xf14, 0x00000003}, {0xf4c, 0x00000000}, 170 {0xf00, 0x00000300}, 171 {0x820, 0x01000100}, {0x800, 0x83040000}, 172 {0xffff, 0xffffffff}, 173 }; 174 175 static struct rtl8xxxu_reg32val rtl8xxx_agc_8723bu_table[] = { 176 {0xc78, 0xfd000001}, {0xc78, 0xfc010001}, 177 {0xc78, 0xfb020001}, {0xc78, 0xfa030001}, 178 {0xc78, 0xf9040001}, {0xc78, 0xf8050001}, 179 {0xc78, 0xf7060001}, {0xc78, 0xf6070001}, 180 {0xc78, 0xf5080001}, {0xc78, 0xf4090001}, 181 {0xc78, 0xf30a0001}, {0xc78, 0xf20b0001}, 182 {0xc78, 0xf10c0001}, {0xc78, 0xf00d0001}, 183 {0xc78, 0xef0e0001}, {0xc78, 0xee0f0001}, 184 {0xc78, 0xed100001}, {0xc78, 0xec110001}, 185 {0xc78, 0xeb120001}, {0xc78, 0xea130001}, 186 {0xc78, 0xe9140001}, {0xc78, 0xe8150001}, 187 {0xc78, 0xe7160001}, {0xc78, 0xe6170001}, 188 {0xc78, 0xe5180001}, {0xc78, 0xe4190001}, 189 {0xc78, 0xe31a0001}, {0xc78, 0xa51b0001}, 190 {0xc78, 0xa41c0001}, {0xc78, 0xa31d0001}, 191 {0xc78, 0x671e0001}, {0xc78, 0x661f0001}, 192 {0xc78, 0x65200001}, {0xc78, 0x64210001}, 193 {0xc78, 0x63220001}, {0xc78, 0x4a230001}, 194 {0xc78, 0x49240001}, {0xc78, 0x48250001}, 195 {0xc78, 0x47260001}, {0xc78, 0x46270001}, 196 {0xc78, 0x45280001}, {0xc78, 0x44290001}, 197 {0xc78, 0x432a0001}, {0xc78, 0x422b0001}, 198 {0xc78, 0x292c0001}, {0xc78, 0x282d0001}, 199 {0xc78, 0x272e0001}, {0xc78, 0x262f0001}, 200 {0xc78, 0x0a300001}, {0xc78, 0x09310001}, 201 {0xc78, 0x08320001}, {0xc78, 0x07330001}, 202 {0xc78, 0x06340001}, {0xc78, 0x05350001}, 203 {0xc78, 0x04360001}, {0xc78, 0x03370001}, 204 {0xc78, 0x02380001}, {0xc78, 0x01390001}, 205 {0xc78, 0x013a0001}, {0xc78, 0x013b0001}, 206 {0xc78, 0x013c0001}, {0xc78, 0x013d0001}, 207 {0xc78, 0x013e0001}, {0xc78, 0x013f0001}, 208 {0xc78, 0xfc400001}, {0xc78, 0xfb410001}, 209 {0xc78, 0xfa420001}, {0xc78, 0xf9430001}, 210 {0xc78, 0xf8440001}, {0xc78, 0xf7450001}, 211 {0xc78, 0xf6460001}, {0xc78, 0xf5470001}, 212 {0xc78, 0xf4480001}, {0xc78, 0xf3490001}, 213 {0xc78, 0xf24a0001}, {0xc78, 0xf14b0001}, 214 {0xc78, 0xf04c0001}, {0xc78, 0xef4d0001}, 215 {0xc78, 0xee4e0001}, {0xc78, 0xed4f0001}, 216 {0xc78, 0xec500001}, {0xc78, 0xeb510001}, 217 {0xc78, 0xea520001}, {0xc78, 0xe9530001}, 218 {0xc78, 0xe8540001}, {0xc78, 0xe7550001}, 219 {0xc78, 0xe6560001}, {0xc78, 0xe5570001}, 220 {0xc78, 0xe4580001}, {0xc78, 0xe3590001}, 221 {0xc78, 0xa65a0001}, {0xc78, 0xa55b0001}, 222 {0xc78, 0xa45c0001}, {0xc78, 0xa35d0001}, 223 {0xc78, 0x675e0001}, {0xc78, 0x665f0001}, 224 {0xc78, 0x65600001}, {0xc78, 0x64610001}, 225 {0xc78, 0x63620001}, {0xc78, 0x62630001}, 226 {0xc78, 0x61640001}, {0xc78, 0x48650001}, 227 {0xc78, 0x47660001}, {0xc78, 0x46670001}, 228 {0xc78, 0x45680001}, {0xc78, 0x44690001}, 229 {0xc78, 0x436a0001}, {0xc78, 0x426b0001}, 230 {0xc78, 0x286c0001}, {0xc78, 0x276d0001}, 231 {0xc78, 0x266e0001}, {0xc78, 0x256f0001}, 232 {0xc78, 0x24700001}, {0xc78, 0x09710001}, 233 {0xc78, 0x08720001}, {0xc78, 0x07730001}, 234 {0xc78, 0x06740001}, {0xc78, 0x05750001}, 235 {0xc78, 0x04760001}, {0xc78, 0x03770001}, 236 {0xc78, 0x02780001}, {0xc78, 0x01790001}, 237 {0xc78, 0x017a0001}, {0xc78, 0x017b0001}, 238 {0xc78, 0x017c0001}, {0xc78, 0x017d0001}, 239 {0xc78, 0x017e0001}, {0xc78, 0x017f0001}, 240 {0xc50, 0x69553422}, 241 {0xc50, 0x69553420}, 242 {0x824, 0x00390204}, 243 {0xffff, 0xffffffff} 244 }; 245 246 static struct rtl8xxxu_rfregval rtl8723bu_radioa_1t_init_table[] = { 247 {0x00, 0x00010000}, {0xb0, 0x000dffe0}, 248 {0xfe, 0x00000000}, {0xfe, 0x00000000}, 249 {0xfe, 0x00000000}, {0xb1, 0x00000018}, 250 {0xfe, 0x00000000}, {0xfe, 0x00000000}, 251 {0xfe, 0x00000000}, {0xb2, 0x00084c00}, 252 {0xb5, 0x0000d2cc}, {0xb6, 0x000925aa}, 253 {0xb7, 0x00000010}, {0xb8, 0x0000907f}, 254 {0x5c, 0x00000002}, {0x7c, 0x00000002}, 255 {0x7e, 0x00000005}, {0x8b, 0x0006fc00}, 256 {0xb0, 0x000ff9f0}, {0x1c, 0x000739d2}, 257 {0x1e, 0x00000000}, {0xdf, 0x00000780}, 258 {0x50, 0x00067435}, 259 /* 260 * The 8723bu vendor driver indicates that bit 8 should be set in 261 * 0x51 for package types TFBGA90, TFBGA80, and TFBGA79. However 262 * they never actually check the package type - and just default 263 * to not setting it. 264 */ 265 {0x51, 0x0006b04e}, 266 {0x52, 0x000007d2}, {0x53, 0x00000000}, 267 {0x54, 0x00050400}, {0x55, 0x0004026e}, 268 {0xdd, 0x0000004c}, {0x70, 0x00067435}, 269 /* 270 * 0x71 has same package type condition as for register 0x51 271 */ 272 {0x71, 0x0006b04e}, 273 {0x72, 0x000007d2}, {0x73, 0x00000000}, 274 {0x74, 0x00050400}, {0x75, 0x0004026e}, 275 {0xef, 0x00000100}, {0x34, 0x0000add7}, 276 {0x35, 0x00005c00}, {0x34, 0x00009dd4}, 277 {0x35, 0x00005000}, {0x34, 0x00008dd1}, 278 {0x35, 0x00004400}, {0x34, 0x00007dce}, 279 {0x35, 0x00003800}, {0x34, 0x00006cd1}, 280 {0x35, 0x00004400}, {0x34, 0x00005cce}, 281 {0x35, 0x00003800}, {0x34, 0x000048ce}, 282 {0x35, 0x00004400}, {0x34, 0x000034ce}, 283 {0x35, 0x00003800}, {0x34, 0x00002451}, 284 {0x35, 0x00004400}, {0x34, 0x0000144e}, 285 {0x35, 0x00003800}, {0x34, 0x00000051}, 286 {0x35, 0x00004400}, {0xef, 0x00000000}, 287 {0xef, 0x00000100}, {0xed, 0x00000010}, 288 {0x44, 0x0000add7}, {0x44, 0x00009dd4}, 289 {0x44, 0x00008dd1}, {0x44, 0x00007dce}, 290 {0x44, 0x00006cc1}, {0x44, 0x00005cce}, 291 {0x44, 0x000044d1}, {0x44, 0x000034ce}, 292 {0x44, 0x00002451}, {0x44, 0x0000144e}, 293 {0x44, 0x00000051}, {0xef, 0x00000000}, 294 {0xed, 0x00000000}, {0x7f, 0x00020080}, 295 {0xef, 0x00002000}, {0x3b, 0x000380ef}, 296 {0x3b, 0x000302fe}, {0x3b, 0x00028ce6}, 297 {0x3b, 0x000200bc}, {0x3b, 0x000188a5}, 298 {0x3b, 0x00010fbc}, {0x3b, 0x00008f71}, 299 {0x3b, 0x00000900}, {0xef, 0x00000000}, 300 {0xed, 0x00000001}, {0x40, 0x000380ef}, 301 {0x40, 0x000302fe}, {0x40, 0x00028ce6}, 302 {0x40, 0x000200bc}, {0x40, 0x000188a5}, 303 {0x40, 0x00010fbc}, {0x40, 0x00008f71}, 304 {0x40, 0x00000900}, {0xed, 0x00000000}, 305 {0x82, 0x00080000}, {0x83, 0x00008000}, 306 {0x84, 0x00048d80}, {0x85, 0x00068000}, 307 {0xa2, 0x00080000}, {0xa3, 0x00008000}, 308 {0xa4, 0x00048d80}, {0xa5, 0x00068000}, 309 {0xed, 0x00000002}, {0xef, 0x00000002}, 310 {0x56, 0x00000032}, {0x76, 0x00000032}, 311 {0x01, 0x00000780}, 312 {0xff, 0xffffffff} 313 }; 314 315 static void rtl8723bu_write_btreg(struct rtl8xxxu_priv *priv, u8 reg, u8 data) 316 { 317 struct h2c_cmd h2c; 318 int reqnum = 0; 319 320 memset(&h2c, 0, sizeof(struct h2c_cmd)); 321 h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; 322 h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); 323 h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; 324 h2c.bt_mp_oper.data = data; 325 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); 326 327 reqnum++; 328 memset(&h2c, 0, sizeof(struct h2c_cmd)); 329 h2c.bt_mp_oper.cmd = H2C_8723B_BT_MP_OPER; 330 h2c.bt_mp_oper.operreq = 0 | (reqnum << 4); 331 h2c.bt_mp_oper.opcode = BT_MP_OP_WRITE_REG_VALUE; 332 h2c.bt_mp_oper.addr = reg; 333 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_mp_oper)); 334 } 335 336 static void rtl8723bu_reset_8051(struct rtl8xxxu_priv *priv) 337 { 338 u8 val8; 339 u16 sys_func; 340 341 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); 342 val8 &= ~BIT(1); 343 rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); 344 345 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); 346 val8 &= ~BIT(0); 347 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); 348 349 sys_func = rtl8xxxu_read16(priv, REG_SYS_FUNC); 350 sys_func &= ~SYS_FUNC_CPU_ENABLE; 351 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); 352 353 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL); 354 val8 &= ~BIT(1); 355 rtl8xxxu_write8(priv, REG_RSV_CTRL, val8); 356 357 val8 = rtl8xxxu_read8(priv, REG_RSV_CTRL + 1); 358 val8 |= BIT(0); 359 rtl8xxxu_write8(priv, REG_RSV_CTRL + 1, val8); 360 361 sys_func |= SYS_FUNC_CPU_ENABLE; 362 rtl8xxxu_write16(priv, REG_SYS_FUNC, sys_func); 363 } 364 365 static void 366 rtl8723b_set_tx_power(struct rtl8xxxu_priv *priv, int channel, bool ht40) 367 { 368 u32 val32, ofdm, mcs; 369 u8 cck, ofdmbase, mcsbase; 370 int group, tx_idx; 371 372 tx_idx = 0; 373 group = rtl8xxxu_gen2_channel_to_group(channel); 374 375 cck = priv->cck_tx_power_index_B[group]; 376 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_A_CCK1_MCS32); 377 val32 &= 0xffff00ff; 378 val32 |= (cck << 8); 379 rtl8xxxu_write32(priv, REG_TX_AGC_A_CCK1_MCS32, val32); 380 381 val32 = rtl8xxxu_read32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11); 382 val32 &= 0xff; 383 val32 |= ((cck << 8) | (cck << 16) | (cck << 24)); 384 rtl8xxxu_write32(priv, REG_TX_AGC_B_CCK11_A_CCK2_11, val32); 385 386 ofdmbase = priv->ht40_1s_tx_power_index_B[group]; 387 ofdmbase += priv->ofdm_tx_power_diff[tx_idx].b; 388 ofdm = ofdmbase | ofdmbase << 8 | ofdmbase << 16 | ofdmbase << 24; 389 390 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE18_06, ofdm); 391 rtl8xxxu_write32(priv, REG_TX_AGC_A_RATE54_24, ofdm); 392 393 mcsbase = priv->ht40_1s_tx_power_index_B[group]; 394 if (ht40) 395 mcsbase += priv->ht40_tx_power_diff[tx_idx++].b; 396 else 397 mcsbase += priv->ht20_tx_power_diff[tx_idx++].b; 398 mcs = mcsbase | mcsbase << 8 | mcsbase << 16 | mcsbase << 24; 399 400 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS03_MCS00, mcs); 401 rtl8xxxu_write32(priv, REG_TX_AGC_A_MCS07_MCS04, mcs); 402 } 403 404 static int rtl8723bu_parse_efuse(struct rtl8xxxu_priv *priv) 405 { 406 struct rtl8723bu_efuse *efuse = &priv->efuse_wifi.efuse8723bu; 407 int i; 408 409 if (efuse->rtl_id != cpu_to_le16(0x8129)) 410 return -EINVAL; 411 412 ether_addr_copy(priv->mac_addr, efuse->mac_addr); 413 414 memcpy(priv->cck_tx_power_index_A, efuse->tx_power_index_A.cck_base, 415 sizeof(efuse->tx_power_index_A.cck_base)); 416 memcpy(priv->cck_tx_power_index_B, efuse->tx_power_index_B.cck_base, 417 sizeof(efuse->tx_power_index_B.cck_base)); 418 419 memcpy(priv->ht40_1s_tx_power_index_A, 420 efuse->tx_power_index_A.ht40_base, 421 sizeof(efuse->tx_power_index_A.ht40_base)); 422 memcpy(priv->ht40_1s_tx_power_index_B, 423 efuse->tx_power_index_B.ht40_base, 424 sizeof(efuse->tx_power_index_B.ht40_base)); 425 426 priv->ofdm_tx_power_diff[0].a = 427 efuse->tx_power_index_A.ht20_ofdm_1s_diff.a; 428 priv->ofdm_tx_power_diff[0].b = 429 efuse->tx_power_index_B.ht20_ofdm_1s_diff.a; 430 431 priv->ht20_tx_power_diff[0].a = 432 efuse->tx_power_index_A.ht20_ofdm_1s_diff.b; 433 priv->ht20_tx_power_diff[0].b = 434 efuse->tx_power_index_B.ht20_ofdm_1s_diff.b; 435 436 priv->ht40_tx_power_diff[0].a = 0; 437 priv->ht40_tx_power_diff[0].b = 0; 438 439 for (i = 1; i < RTL8723B_TX_COUNT; i++) { 440 priv->ofdm_tx_power_diff[i].a = 441 efuse->tx_power_index_A.pwr_diff[i - 1].ofdm; 442 priv->ofdm_tx_power_diff[i].b = 443 efuse->tx_power_index_B.pwr_diff[i - 1].ofdm; 444 445 priv->ht20_tx_power_diff[i].a = 446 efuse->tx_power_index_A.pwr_diff[i - 1].ht20; 447 priv->ht20_tx_power_diff[i].b = 448 efuse->tx_power_index_B.pwr_diff[i - 1].ht20; 449 450 priv->ht40_tx_power_diff[i].a = 451 efuse->tx_power_index_A.pwr_diff[i - 1].ht40; 452 priv->ht40_tx_power_diff[i].b = 453 efuse->tx_power_index_B.pwr_diff[i - 1].ht40; 454 } 455 456 priv->has_xtalk = 1; 457 priv->xtalk = priv->efuse_wifi.efuse8723bu.xtal_k & 0x3f; 458 459 dev_info(&priv->udev->dev, "Vendor: %.7s\n", efuse->vendor_name); 460 dev_info(&priv->udev->dev, "Product: %.41s\n", efuse->device_name); 461 462 if (rtl8xxxu_debug & RTL8XXXU_DEBUG_EFUSE) { 463 int i; 464 unsigned char *raw = priv->efuse_wifi.raw; 465 466 dev_info(&priv->udev->dev, 467 "%s: dumping efuse (0x%02zx bytes):\n", 468 __func__, sizeof(struct rtl8723bu_efuse)); 469 for (i = 0; i < sizeof(struct rtl8723bu_efuse); i += 8) 470 dev_info(&priv->udev->dev, "%02x: %8ph\n", i, &raw[i]); 471 } 472 473 return 0; 474 } 475 476 static int rtl8723bu_load_firmware(struct rtl8xxxu_priv *priv) 477 { 478 char *fw_name; 479 int ret; 480 481 if (priv->enable_bluetooth) 482 fw_name = "rtlwifi/rtl8723bu_bt.bin"; 483 else 484 fw_name = "rtlwifi/rtl8723bu_nic.bin"; 485 486 ret = rtl8xxxu_load_firmware(priv, fw_name); 487 return ret; 488 } 489 490 static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv) 491 { 492 u8 val8; 493 u16 val16; 494 495 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); 496 val16 |= SYS_FUNC_BB_GLB_RSTN | SYS_FUNC_BBRSTB | SYS_FUNC_DIO_RF; 497 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); 498 499 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); 500 501 /* 6. 0x1f[7:0] = 0x07 */ 502 val8 = RF_ENABLE | RF_RSTB | RF_SDMRSTB; 503 rtl8xxxu_write8(priv, REG_RF_CTRL, val8); 504 505 /* Why? */ 506 rtl8xxxu_write8(priv, REG_SYS_FUNC, 0xe3); 507 rtl8xxxu_write8(priv, REG_AFE_XTAL_CTRL + 1, 0x80); 508 rtl8xxxu_init_phy_regs(priv, rtl8723b_phy_1t_init_table); 509 510 rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_8723bu_table); 511 } 512 513 static int rtl8723bu_init_phy_rf(struct rtl8xxxu_priv *priv) 514 { 515 int ret; 516 517 ret = rtl8xxxu_init_phy_rf(priv, rtl8723bu_radioa_1t_init_table, RF_A); 518 /* 519 * PHY LCK 520 */ 521 rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdfbe0); 522 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_MODE_AG, 0x8c01); 523 msleep(200); 524 rtl8xxxu_write_rfreg(priv, RF_A, 0xb0, 0xdffe0); 525 526 return ret; 527 } 528 529 static void rtl8723bu_phy_init_antenna_selection(struct rtl8xxxu_priv *priv) 530 { 531 u32 val32; 532 533 val32 = rtl8xxxu_read32(priv, REG_PAD_CTRL1); 534 val32 &= ~(BIT(20) | BIT(24)); 535 rtl8xxxu_write32(priv, REG_PAD_CTRL1, val32); 536 537 val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); 538 val32 &= ~BIT(4); 539 rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); 540 541 val32 = rtl8xxxu_read32(priv, REG_GPIO_MUXCFG); 542 val32 |= BIT(3); 543 rtl8xxxu_write32(priv, REG_GPIO_MUXCFG, val32); 544 545 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); 546 val32 |= BIT(24); 547 rtl8xxxu_write32(priv, REG_LEDCFG0, val32); 548 549 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); 550 val32 &= ~BIT(23); 551 rtl8xxxu_write32(priv, REG_LEDCFG0, val32); 552 553 val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); 554 val32 |= (BIT(0) | BIT(1)); 555 rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); 556 557 val32 = rtl8xxxu_read32(priv, REG_RFE_CTRL_ANTA_SRC); 558 val32 &= 0xffffff00; 559 val32 |= 0x77; 560 rtl8xxxu_write32(priv, REG_RFE_CTRL_ANTA_SRC, val32); 561 562 val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); 563 val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; 564 rtl8xxxu_write32(priv, REG_PWR_DATA, val32); 565 } 566 567 static int rtl8723bu_iqk_path_a(struct rtl8xxxu_priv *priv) 568 { 569 u32 reg_eac, reg_e94, reg_e9c, path_sel, val32; 570 int result = 0; 571 572 path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); 573 574 /* 575 * Leave IQK mode 576 */ 577 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 578 val32 &= 0x000000ff; 579 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 580 581 /* 582 * Enable path A PA in TX IQK mode 583 */ 584 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); 585 val32 |= 0x80000; 586 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); 587 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x20000); 588 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0003f); 589 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xc7f87); 590 591 /* 592 * Tx IQK setting 593 */ 594 rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); 595 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); 596 597 /* path-A IQK setting */ 598 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); 599 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); 600 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); 601 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); 602 603 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x821403ea); 604 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); 605 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); 606 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); 607 608 /* LO calibration setting */ 609 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x00462911); 610 611 /* 612 * Enter IQK mode 613 */ 614 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 615 val32 &= 0x000000ff; 616 val32 |= 0x80800000; 617 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 618 619 /* 620 * The vendor driver indicates the USB module is always using 621 * S0S1 path 1 for the 8723bu. This may be different for 8192eu 622 */ 623 if (priv->rf_paths > 1) 624 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); 625 else 626 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); 627 628 /* 629 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. 630 * No trace of this in the 8192eu or 8188eu vendor drivers. 631 */ 632 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); 633 634 /* One shot, path A LOK & IQK */ 635 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); 636 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); 637 638 mdelay(1); 639 640 /* Restore Ant Path */ 641 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); 642 #ifdef RTL8723BU_BT 643 /* GNT_BT = 1 */ 644 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); 645 #endif 646 647 /* 648 * Leave IQK mode 649 */ 650 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 651 val32 &= 0x000000ff; 652 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 653 654 /* Check failed */ 655 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); 656 reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); 657 reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); 658 659 val32 = (reg_e9c >> 16) & 0x3ff; 660 if (val32 & 0x200) 661 val32 = 0x400 - val32; 662 663 if (!(reg_eac & BIT(28)) && 664 ((reg_e94 & 0x03ff0000) != 0x01420000) && 665 ((reg_e9c & 0x03ff0000) != 0x00420000) && 666 ((reg_e94 & 0x03ff0000) < 0x01100000) && 667 ((reg_e94 & 0x03ff0000) > 0x00f00000) && 668 val32 < 0xf) 669 result |= 0x01; 670 else /* If TX not OK, ignore RX */ 671 goto out; 672 673 out: 674 return result; 675 } 676 677 static int rtl8723bu_rx_iqk_path_a(struct rtl8xxxu_priv *priv) 678 { 679 u32 reg_ea4, reg_eac, reg_e94, reg_e9c, path_sel, val32; 680 int result = 0; 681 682 path_sel = rtl8xxxu_read32(priv, REG_S0S1_PATH_SWITCH); 683 684 /* 685 * Leave IQK mode 686 */ 687 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 688 val32 &= 0x000000ff; 689 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 690 691 /* 692 * Enable path A PA in TX IQK mode 693 */ 694 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); 695 val32 |= 0x80000; 696 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); 697 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); 698 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); 699 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); 700 701 /* 702 * Tx IQK setting 703 */ 704 rtl8xxxu_write32(priv, REG_TX_IQK, 0x01007c00); 705 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); 706 707 /* path-A IQK setting */ 708 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x18008c1c); 709 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x38008c1c); 710 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); 711 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); 712 713 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82160ff0); 714 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x28110000); 715 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); 716 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); 717 718 /* LO calibration setting */ 719 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a911); 720 721 /* 722 * Enter IQK mode 723 */ 724 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 725 val32 &= 0x000000ff; 726 val32 |= 0x80800000; 727 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 728 729 /* 730 * The vendor driver indicates the USB module is always using 731 * S0S1 path 1 for the 8723bu. This may be different for 8192eu 732 */ 733 if (priv->rf_paths > 1) 734 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); 735 else 736 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); 737 738 /* 739 * Bit 12 seems to be BT_GRANT, and is only found in the 8723bu. 740 * No trace of this in the 8192eu or 8188eu vendor drivers. 741 */ 742 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); 743 744 /* One shot, path A LOK & IQK */ 745 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); 746 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); 747 748 mdelay(1); 749 750 /* Restore Ant Path */ 751 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); 752 #ifdef RTL8723BU_BT 753 /* GNT_BT = 1 */ 754 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); 755 #endif 756 757 /* 758 * Leave IQK mode 759 */ 760 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 761 val32 &= 0x000000ff; 762 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 763 764 /* Check failed */ 765 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); 766 reg_e94 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_A); 767 reg_e9c = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_A); 768 769 val32 = (reg_e9c >> 16) & 0x3ff; 770 if (val32 & 0x200) 771 val32 = 0x400 - val32; 772 773 if (!(reg_eac & BIT(28)) && 774 ((reg_e94 & 0x03ff0000) != 0x01420000) && 775 ((reg_e9c & 0x03ff0000) != 0x00420000) && 776 ((reg_e94 & 0x03ff0000) < 0x01100000) && 777 ((reg_e94 & 0x03ff0000) > 0x00f00000) && 778 val32 < 0xf) 779 result |= 0x01; 780 else /* If TX not OK, ignore RX */ 781 goto out; 782 783 val32 = 0x80007c00 | (reg_e94 &0x3ff0000) | 784 ((reg_e9c & 0x3ff0000) >> 16); 785 rtl8xxxu_write32(priv, REG_TX_IQK, val32); 786 787 /* 788 * Modify RX IQK mode 789 */ 790 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 791 val32 &= 0x000000ff; 792 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 793 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); 794 val32 |= 0x80000; 795 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); 796 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); 797 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); 798 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7d77); 799 800 /* 801 * PA, PAD setting 802 */ 803 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0xf80); 804 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_55, 0x4021f); 805 806 /* 807 * RX IQK setting 808 */ 809 rtl8xxxu_write32(priv, REG_RX_IQK, 0x01004800); 810 811 /* path-A IQK setting */ 812 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x38008c1c); 813 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x18008c1c); 814 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_B, 0x38008c1c); 815 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_B, 0x38008c1c); 816 817 rtl8xxxu_write32(priv, REG_TX_IQK_PI_A, 0x82110000); 818 rtl8xxxu_write32(priv, REG_RX_IQK_PI_A, 0x2816001f); 819 rtl8xxxu_write32(priv, REG_TX_IQK_PI_B, 0x82110000); 820 rtl8xxxu_write32(priv, REG_RX_IQK_PI_B, 0x28110000); 821 822 /* LO calibration setting */ 823 rtl8xxxu_write32(priv, REG_IQK_AGC_RSP, 0x0046a8d1); 824 825 /* 826 * Enter IQK mode 827 */ 828 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 829 val32 &= 0x000000ff; 830 val32 |= 0x80800000; 831 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 832 833 if (priv->rf_paths > 1) 834 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000000); 835 else 836 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00000280); 837 838 /* 839 * Disable BT 840 */ 841 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00000800); 842 843 /* One shot, path A LOK & IQK */ 844 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf9000000); 845 rtl8xxxu_write32(priv, REG_IQK_AGC_PTS, 0xf8000000); 846 847 mdelay(1); 848 849 /* Restore Ant Path */ 850 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, path_sel); 851 #ifdef RTL8723BU_BT 852 /* GNT_BT = 1 */ 853 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, 0x00001800); 854 #endif 855 856 /* 857 * Leave IQK mode 858 */ 859 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 860 val32 &= 0x000000ff; 861 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 862 863 /* Check failed */ 864 reg_eac = rtl8xxxu_read32(priv, REG_RX_POWER_AFTER_IQK_A_2); 865 reg_ea4 = rtl8xxxu_read32(priv, REG_RX_POWER_BEFORE_IQK_A_2); 866 867 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_DF, 0x780); 868 869 val32 = (reg_eac >> 16) & 0x3ff; 870 if (val32 & 0x200) 871 val32 = 0x400 - val32; 872 873 if (!(reg_eac & BIT(27)) && 874 ((reg_ea4 & 0x03ff0000) != 0x01320000) && 875 ((reg_eac & 0x03ff0000) != 0x00360000) && 876 ((reg_ea4 & 0x03ff0000) < 0x01100000) && 877 ((reg_ea4 & 0x03ff0000) > 0x00f00000) && 878 val32 < 0xf) 879 result |= 0x02; 880 else /* If TX not OK, ignore RX */ 881 goto out; 882 out: 883 return result; 884 } 885 886 static void rtl8723bu_phy_iqcalibrate(struct rtl8xxxu_priv *priv, 887 int result[][8], int t) 888 { 889 struct device *dev = &priv->udev->dev; 890 u32 i, val32; 891 int path_a_ok /*, path_b_ok */; 892 int retry = 2; 893 const u32 adda_regs[RTL8XXXU_ADDA_REGS] = { 894 REG_FPGA0_XCD_SWITCH_CTRL, REG_BLUETOOTH, 895 REG_RX_WAIT_CCA, REG_TX_CCK_RFON, 896 REG_TX_CCK_BBON, REG_TX_OFDM_RFON, 897 REG_TX_OFDM_BBON, REG_TX_TO_RX, 898 REG_TX_TO_TX, REG_RX_CCK, 899 REG_RX_OFDM, REG_RX_WAIT_RIFS, 900 REG_RX_TO_RX, REG_STANDBY, 901 REG_SLEEP, REG_PMPD_ANAEN 902 }; 903 const u32 iqk_mac_regs[RTL8XXXU_MAC_REGS] = { 904 REG_TXPAUSE, REG_BEACON_CTRL, 905 REG_BEACON_CTRL_1, REG_GPIO_MUXCFG 906 }; 907 const u32 iqk_bb_regs[RTL8XXXU_BB_REGS] = { 908 REG_OFDM0_TRX_PATH_ENABLE, REG_OFDM0_TR_MUX_PAR, 909 REG_FPGA0_XCD_RF_SW_CTRL, REG_CONFIG_ANT_A, REG_CONFIG_ANT_B, 910 REG_FPGA0_XAB_RF_SW_CTRL, REG_FPGA0_XA_RF_INT_OE, 911 REG_FPGA0_XB_RF_INT_OE, REG_FPGA0_RF_MODE 912 }; 913 u8 xa_agc = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1) & 0xff; 914 u8 xb_agc = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1) & 0xff; 915 916 /* 917 * Note: IQ calibration must be performed after loading 918 * PHY_REG.txt , and radio_a, radio_b.txt 919 */ 920 921 if (t == 0) { 922 /* Save ADDA parameters, turn Path A ADDA on */ 923 rtl8xxxu_save_regs(priv, adda_regs, priv->adda_backup, 924 RTL8XXXU_ADDA_REGS); 925 rtl8xxxu_save_mac_regs(priv, iqk_mac_regs, priv->mac_backup); 926 rtl8xxxu_save_regs(priv, iqk_bb_regs, 927 priv->bb_backup, RTL8XXXU_BB_REGS); 928 } 929 930 rtl8xxxu_path_adda_on(priv, adda_regs, true); 931 932 /* MAC settings */ 933 rtl8xxxu_mac_calibration(priv, iqk_mac_regs, priv->mac_backup); 934 935 val32 = rtl8xxxu_read32(priv, REG_CCK0_AFE_SETTING); 936 val32 |= 0x0f000000; 937 rtl8xxxu_write32(priv, REG_CCK0_AFE_SETTING, val32); 938 939 rtl8xxxu_write32(priv, REG_OFDM0_TRX_PATH_ENABLE, 0x03a05600); 940 rtl8xxxu_write32(priv, REG_OFDM0_TR_MUX_PAR, 0x000800e4); 941 rtl8xxxu_write32(priv, REG_FPGA0_XCD_RF_SW_CTRL, 0x22204000); 942 943 /* 944 * RX IQ calibration setting for 8723B D cut large current issue 945 * when leaving IPS 946 */ 947 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 948 val32 &= 0x000000ff; 949 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 950 951 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); 952 val32 |= 0x80000; 953 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); 954 955 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x30000); 956 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); 957 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xf7fb7); 958 959 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); 960 val32 |= 0x20; 961 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); 962 963 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_43, 0x60fbd); 964 965 for (i = 0; i < retry; i++) { 966 path_a_ok = rtl8723bu_iqk_path_a(priv); 967 if (path_a_ok == 0x01) { 968 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 969 val32 &= 0x000000ff; 970 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 971 972 val32 = rtl8xxxu_read32(priv, 973 REG_TX_POWER_BEFORE_IQK_A); 974 result[t][0] = (val32 >> 16) & 0x3ff; 975 val32 = rtl8xxxu_read32(priv, 976 REG_TX_POWER_AFTER_IQK_A); 977 result[t][1] = (val32 >> 16) & 0x3ff; 978 979 break; 980 } 981 } 982 983 if (!path_a_ok) 984 dev_dbg(dev, "%s: Path A TX IQK failed!\n", __func__); 985 986 for (i = 0; i < retry; i++) { 987 path_a_ok = rtl8723bu_rx_iqk_path_a(priv); 988 if (path_a_ok == 0x03) { 989 val32 = rtl8xxxu_read32(priv, 990 REG_RX_POWER_BEFORE_IQK_A_2); 991 result[t][2] = (val32 >> 16) & 0x3ff; 992 val32 = rtl8xxxu_read32(priv, 993 REG_RX_POWER_AFTER_IQK_A_2); 994 result[t][3] = (val32 >> 16) & 0x3ff; 995 996 break; 997 } 998 } 999 1000 if (!path_a_ok) 1001 dev_dbg(dev, "%s: Path A RX IQK failed!\n", __func__); 1002 1003 if (priv->tx_paths > 1) { 1004 #if 1 1005 dev_warn(dev, "%s: Path B not supported\n", __func__); 1006 #else 1007 1008 /* 1009 * Path A into standby 1010 */ 1011 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 1012 val32 &= 0x000000ff; 1013 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 1014 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_AC, 0x10000); 1015 1016 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 1017 val32 &= 0x000000ff; 1018 val32 |= 0x80800000; 1019 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 1020 1021 /* Turn Path B ADDA on */ 1022 rtl8xxxu_path_adda_on(priv, adda_regs, false); 1023 1024 for (i = 0; i < retry; i++) { 1025 path_b_ok = rtl8xxxu_iqk_path_b(priv); 1026 if (path_b_ok == 0x03) { 1027 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_BEFORE_IQK_B); 1028 result[t][4] = (val32 >> 16) & 0x3ff; 1029 val32 = rtl8xxxu_read32(priv, REG_TX_POWER_AFTER_IQK_B); 1030 result[t][5] = (val32 >> 16) & 0x3ff; 1031 break; 1032 } 1033 } 1034 1035 if (!path_b_ok) 1036 dev_dbg(dev, "%s: Path B IQK failed!\n", __func__); 1037 1038 for (i = 0; i < retry; i++) { 1039 path_b_ok = rtl8723bu_rx_iqk_path_b(priv); 1040 if (path_a_ok == 0x03) { 1041 val32 = rtl8xxxu_read32(priv, 1042 REG_RX_POWER_BEFORE_IQK_B_2); 1043 result[t][6] = (val32 >> 16) & 0x3ff; 1044 val32 = rtl8xxxu_read32(priv, 1045 REG_RX_POWER_AFTER_IQK_B_2); 1046 result[t][7] = (val32 >> 16) & 0x3ff; 1047 break; 1048 } 1049 } 1050 1051 if (!path_b_ok) 1052 dev_dbg(dev, "%s: Path B RX IQK failed!\n", __func__); 1053 #endif 1054 } 1055 1056 /* Back to BB mode, load original value */ 1057 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 1058 val32 &= 0x000000ff; 1059 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 1060 1061 if (t) { 1062 /* Reload ADDA power saving parameters */ 1063 rtl8xxxu_restore_regs(priv, adda_regs, priv->adda_backup, 1064 RTL8XXXU_ADDA_REGS); 1065 1066 /* Reload MAC parameters */ 1067 rtl8xxxu_restore_mac_regs(priv, iqk_mac_regs, priv->mac_backup); 1068 1069 /* Reload BB parameters */ 1070 rtl8xxxu_restore_regs(priv, iqk_bb_regs, 1071 priv->bb_backup, RTL8XXXU_BB_REGS); 1072 1073 /* Restore RX initial gain */ 1074 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XA_AGC_CORE1); 1075 val32 &= 0xffffff00; 1076 rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | 0x50); 1077 rtl8xxxu_write32(priv, REG_OFDM0_XA_AGC_CORE1, val32 | xa_agc); 1078 1079 if (priv->tx_paths > 1) { 1080 val32 = rtl8xxxu_read32(priv, REG_OFDM0_XB_AGC_CORE1); 1081 val32 &= 0xffffff00; 1082 rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, 1083 val32 | 0x50); 1084 rtl8xxxu_write32(priv, REG_OFDM0_XB_AGC_CORE1, 1085 val32 | xb_agc); 1086 } 1087 1088 /* Load 0xe30 IQC default value */ 1089 rtl8xxxu_write32(priv, REG_TX_IQK_TONE_A, 0x01008c00); 1090 rtl8xxxu_write32(priv, REG_RX_IQK_TONE_A, 0x01008c00); 1091 } 1092 } 1093 1094 static void rtl8723bu_phy_iq_calibrate(struct rtl8xxxu_priv *priv) 1095 { 1096 struct device *dev = &priv->udev->dev; 1097 int result[4][8]; /* last is final result */ 1098 int i, candidate; 1099 bool path_a_ok, path_b_ok; 1100 u32 reg_e94, reg_e9c, reg_ea4, reg_eac; 1101 u32 reg_eb4, reg_ebc, reg_ec4, reg_ecc; 1102 u32 val32, bt_control; 1103 s32 reg_tmp = 0; 1104 bool simu; 1105 1106 rtl8xxxu_gen2_prepare_calibrate(priv, 1); 1107 1108 memset(result, 0, sizeof(result)); 1109 candidate = -1; 1110 1111 path_a_ok = false; 1112 path_b_ok = false; 1113 1114 bt_control = rtl8xxxu_read32(priv, REG_BT_CONTROL_8723BU); 1115 1116 for (i = 0; i < 3; i++) { 1117 rtl8723bu_phy_iqcalibrate(priv, result, i); 1118 1119 if (i == 1) { 1120 simu = rtl8xxxu_gen2_simularity_compare(priv, 1121 result, 0, 1); 1122 if (simu) { 1123 candidate = 0; 1124 break; 1125 } 1126 } 1127 1128 if (i == 2) { 1129 simu = rtl8xxxu_gen2_simularity_compare(priv, 1130 result, 0, 2); 1131 if (simu) { 1132 candidate = 0; 1133 break; 1134 } 1135 1136 simu = rtl8xxxu_gen2_simularity_compare(priv, 1137 result, 1, 2); 1138 if (simu) { 1139 candidate = 1; 1140 } else { 1141 for (i = 0; i < 8; i++) 1142 reg_tmp += result[3][i]; 1143 1144 if (reg_tmp) 1145 candidate = 3; 1146 else 1147 candidate = -1; 1148 } 1149 } 1150 } 1151 1152 for (i = 0; i < 4; i++) { 1153 reg_e94 = result[i][0]; 1154 reg_e9c = result[i][1]; 1155 reg_ea4 = result[i][2]; 1156 reg_eac = result[i][3]; 1157 reg_eb4 = result[i][4]; 1158 reg_ebc = result[i][5]; 1159 reg_ec4 = result[i][6]; 1160 reg_ecc = result[i][7]; 1161 } 1162 1163 if (candidate >= 0) { 1164 reg_e94 = result[candidate][0]; 1165 priv->rege94 = reg_e94; 1166 reg_e9c = result[candidate][1]; 1167 priv->rege9c = reg_e9c; 1168 reg_ea4 = result[candidate][2]; 1169 reg_eac = result[candidate][3]; 1170 reg_eb4 = result[candidate][4]; 1171 priv->regeb4 = reg_eb4; 1172 reg_ebc = result[candidate][5]; 1173 priv->regebc = reg_ebc; 1174 reg_ec4 = result[candidate][6]; 1175 reg_ecc = result[candidate][7]; 1176 dev_dbg(dev, "%s: candidate is %x\n", __func__, candidate); 1177 dev_dbg(dev, 1178 "%s: e94 =%x e9c=%x ea4=%x eac=%x eb4=%x ebc=%x ec4=%x ecc=%x\n", 1179 __func__, reg_e94, reg_e9c, 1180 reg_ea4, reg_eac, reg_eb4, reg_ebc, reg_ec4, reg_ecc); 1181 path_a_ok = true; 1182 path_b_ok = true; 1183 } else { 1184 reg_e94 = reg_eb4 = priv->rege94 = priv->regeb4 = 0x100; 1185 reg_e9c = reg_ebc = priv->rege9c = priv->regebc = 0x0; 1186 } 1187 1188 if (reg_e94 && candidate >= 0) 1189 rtl8xxxu_fill_iqk_matrix_a(priv, path_a_ok, result, 1190 candidate, (reg_ea4 == 0)); 1191 1192 if (priv->tx_paths > 1 && reg_eb4) 1193 rtl8xxxu_fill_iqk_matrix_b(priv, path_b_ok, result, 1194 candidate, (reg_ec4 == 0)); 1195 1196 rtl8xxxu_save_regs(priv, rtl8xxxu_iqk_phy_iq_bb_reg, 1197 priv->bb_recovery_backup, RTL8XXXU_BB_REGS); 1198 1199 rtl8xxxu_write32(priv, REG_BT_CONTROL_8723BU, bt_control); 1200 1201 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_WE_LUT); 1202 val32 |= 0x80000; 1203 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_WE_LUT, val32); 1204 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_RCK_OS, 0x18000); 1205 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G1, 0x0001f); 1206 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_TXPA_G2, 0xe6177); 1207 val32 = rtl8xxxu_read_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED); 1208 val32 |= 0x20; 1209 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_UNKNOWN_ED, val32); 1210 rtl8xxxu_write_rfreg(priv, RF_A, 0x43, 0x300bd); 1211 1212 if (priv->rf_paths > 1) 1213 dev_dbg(dev, "%s: 8723BU 2T not supported\n", __func__); 1214 1215 rtl8xxxu_gen2_prepare_calibrate(priv, 0); 1216 } 1217 1218 static int rtl8723bu_active_to_emu(struct rtl8xxxu_priv *priv) 1219 { 1220 u8 val8; 1221 u16 val16; 1222 u32 val32; 1223 int count, ret = 0; 1224 1225 /* Turn off RF */ 1226 rtl8xxxu_write8(priv, REG_RF_CTRL, 0); 1227 1228 /* Enable rising edge triggering interrupt */ 1229 val16 = rtl8xxxu_read16(priv, REG_GPIO_INTM); 1230 val16 &= ~GPIO_INTM_EDGE_TRIG_IRQ; 1231 rtl8xxxu_write16(priv, REG_GPIO_INTM, val16); 1232 1233 /* Release WLON reset 0x04[16]= 1*/ 1234 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1235 val32 |= APS_FSMCO_WLON_RESET; 1236 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1237 1238 /* 0x0005[1] = 1 turn off MAC by HW state machine*/ 1239 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); 1240 val8 |= BIT(1); 1241 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); 1242 1243 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { 1244 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); 1245 if ((val8 & BIT(1)) == 0) 1246 break; 1247 udelay(10); 1248 } 1249 1250 if (!count) { 1251 dev_warn(&priv->udev->dev, "%s: Disabling MAC timed out\n", 1252 __func__); 1253 ret = -EBUSY; 1254 goto exit; 1255 } 1256 1257 /* Enable BT control XTAL setting */ 1258 val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); 1259 val8 &= ~AFE_MISC_WL_XTAL_CTRL; 1260 rtl8xxxu_write8(priv, REG_AFE_MISC, val8); 1261 1262 /* 0x0000[5] = 1 analog Ips to digital, 1:isolation */ 1263 val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); 1264 val8 |= SYS_ISO_ANALOG_IPS; 1265 rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); 1266 1267 /* 0x0020[0] = 0 disable LDOA12 MACRO block*/ 1268 val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); 1269 val8 &= ~LDOA15_ENABLE; 1270 rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); 1271 1272 exit: 1273 return ret; 1274 } 1275 1276 static int rtl8723b_emu_to_active(struct rtl8xxxu_priv *priv) 1277 { 1278 u8 val8; 1279 u32 val32; 1280 int count, ret = 0; 1281 1282 /* 0x20[0] = 1 enable LDOA12 MACRO block for all interface */ 1283 val8 = rtl8xxxu_read8(priv, REG_LDOA15_CTRL); 1284 val8 |= LDOA15_ENABLE; 1285 rtl8xxxu_write8(priv, REG_LDOA15_CTRL, val8); 1286 1287 /* 0x67[0] = 0 to disable BT_GPS_SEL pins*/ 1288 val8 = rtl8xxxu_read8(priv, 0x0067); 1289 val8 &= ~BIT(4); 1290 rtl8xxxu_write8(priv, 0x0067, val8); 1291 1292 mdelay(1); 1293 1294 /* 0x00[5] = 0 release analog Ips to digital, 1:isolation */ 1295 val8 = rtl8xxxu_read8(priv, REG_SYS_ISO_CTRL); 1296 val8 &= ~SYS_ISO_ANALOG_IPS; 1297 rtl8xxxu_write8(priv, REG_SYS_ISO_CTRL, val8); 1298 1299 /* Disable SW LPS 0x04[10]= 0 */ 1300 val32 = rtl8xxxu_read8(priv, REG_APS_FSMCO); 1301 val32 &= ~APS_FSMCO_SW_LPS; 1302 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1303 1304 /* Wait until 0x04[17] = 1 power ready */ 1305 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { 1306 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1307 if (val32 & BIT(17)) 1308 break; 1309 1310 udelay(10); 1311 } 1312 1313 if (!count) { 1314 ret = -EBUSY; 1315 goto exit; 1316 } 1317 1318 /* We should be able to optimize the following three entries into one */ 1319 1320 /* Release WLON reset 0x04[16]= 1*/ 1321 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1322 val32 |= APS_FSMCO_WLON_RESET; 1323 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1324 1325 /* Disable HWPDN 0x04[15]= 0*/ 1326 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1327 val32 &= ~APS_FSMCO_HW_POWERDOWN; 1328 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1329 1330 /* Disable WL suspend*/ 1331 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1332 val32 &= ~(APS_FSMCO_HW_SUSPEND | APS_FSMCO_PCIE); 1333 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1334 1335 /* Set, then poll until 0 */ 1336 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1337 val32 |= APS_FSMCO_MAC_ENABLE; 1338 rtl8xxxu_write32(priv, REG_APS_FSMCO, val32); 1339 1340 for (count = RTL8XXXU_MAX_REG_POLL; count; count--) { 1341 val32 = rtl8xxxu_read32(priv, REG_APS_FSMCO); 1342 if ((val32 & APS_FSMCO_MAC_ENABLE) == 0) { 1343 ret = 0; 1344 break; 1345 } 1346 udelay(10); 1347 } 1348 1349 if (!count) { 1350 ret = -EBUSY; 1351 goto exit; 1352 } 1353 1354 /* Enable WL control XTAL setting */ 1355 val8 = rtl8xxxu_read8(priv, REG_AFE_MISC); 1356 val8 |= AFE_MISC_WL_XTAL_CTRL; 1357 rtl8xxxu_write8(priv, REG_AFE_MISC, val8); 1358 1359 /* Enable falling edge triggering interrupt */ 1360 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 1); 1361 val8 |= BIT(1); 1362 rtl8xxxu_write8(priv, REG_GPIO_INTM + 1, val8); 1363 1364 /* Enable GPIO9 interrupt mode */ 1365 val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2 + 1); 1366 val8 |= BIT(1); 1367 rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2 + 1, val8); 1368 1369 /* Enable GPIO9 input mode */ 1370 val8 = rtl8xxxu_read8(priv, REG_GPIO_IO_SEL_2); 1371 val8 &= ~BIT(1); 1372 rtl8xxxu_write8(priv, REG_GPIO_IO_SEL_2, val8); 1373 1374 /* Enable HSISR GPIO[C:0] interrupt */ 1375 val8 = rtl8xxxu_read8(priv, REG_HSIMR); 1376 val8 |= BIT(0); 1377 rtl8xxxu_write8(priv, REG_HSIMR, val8); 1378 1379 /* Enable HSISR GPIO9 interrupt */ 1380 val8 = rtl8xxxu_read8(priv, REG_HSIMR + 2); 1381 val8 |= BIT(1); 1382 rtl8xxxu_write8(priv, REG_HSIMR + 2, val8); 1383 1384 val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL); 1385 val8 |= MULTI_WIFI_HW_ROF_EN; 1386 rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL, val8); 1387 1388 /* For GPIO9 internal pull high setting BIT(14) */ 1389 val8 = rtl8xxxu_read8(priv, REG_MULTI_FUNC_CTRL + 1); 1390 val8 |= BIT(6); 1391 rtl8xxxu_write8(priv, REG_MULTI_FUNC_CTRL + 1, val8); 1392 1393 exit: 1394 return ret; 1395 } 1396 1397 static int rtl8723bu_power_on(struct rtl8xxxu_priv *priv) 1398 { 1399 u8 val8; 1400 u16 val16; 1401 u32 val32; 1402 int ret; 1403 1404 rtl8xxxu_disabled_to_emu(priv); 1405 1406 ret = rtl8723b_emu_to_active(priv); 1407 if (ret) 1408 goto exit; 1409 1410 /* 1411 * Enable MAC DMA/WMAC/SCHEDULE/SEC block 1412 * Set CR bit10 to enable 32k calibration. 1413 */ 1414 val16 = rtl8xxxu_read16(priv, REG_CR); 1415 val16 |= (CR_HCI_TXDMA_ENABLE | CR_HCI_RXDMA_ENABLE | 1416 CR_TXDMA_ENABLE | CR_RXDMA_ENABLE | 1417 CR_PROTOCOL_ENABLE | CR_SCHEDULE_ENABLE | 1418 CR_MAC_TX_ENABLE | CR_MAC_RX_ENABLE | 1419 CR_SECURITY_ENABLE | CR_CALTIMER_ENABLE); 1420 rtl8xxxu_write16(priv, REG_CR, val16); 1421 1422 /* 1423 * BT coexist power on settings. This is identical for 1 and 2 1424 * antenna parts. 1425 */ 1426 rtl8xxxu_write8(priv, REG_PAD_CTRL1 + 3, 0x20); 1427 1428 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); 1429 val16 |= SYS_FUNC_BBRSTB | SYS_FUNC_BB_GLB_RSTN; 1430 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); 1431 1432 rtl8xxxu_write8(priv, REG_BT_CONTROL_8723BU + 1, 0x18); 1433 rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); 1434 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); 1435 /* Antenna inverse */ 1436 rtl8xxxu_write8(priv, 0xfe08, 0x01); 1437 1438 val16 = rtl8xxxu_read16(priv, REG_PWR_DATA); 1439 val16 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; 1440 rtl8xxxu_write16(priv, REG_PWR_DATA, val16); 1441 1442 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); 1443 val32 |= LEDCFG0_DPDT_SELECT; 1444 rtl8xxxu_write32(priv, REG_LEDCFG0, val32); 1445 1446 val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); 1447 val8 &= ~PAD_CTRL1_SW_DPDT_SEL_DATA; 1448 rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); 1449 exit: 1450 return ret; 1451 } 1452 1453 static void rtl8723bu_power_off(struct rtl8xxxu_priv *priv) 1454 { 1455 u8 val8; 1456 u16 val16; 1457 1458 rtl8xxxu_flush_fifo(priv); 1459 1460 /* 1461 * Disable TX report timer 1462 */ 1463 val8 = rtl8xxxu_read8(priv, REG_TX_REPORT_CTRL); 1464 val8 &= ~TX_REPORT_CTRL_TIMER_ENABLE; 1465 rtl8xxxu_write8(priv, REG_TX_REPORT_CTRL, val8); 1466 1467 rtl8xxxu_write8(priv, REG_CR, 0x0000); 1468 1469 rtl8xxxu_active_to_lps(priv); 1470 1471 /* Reset Firmware if running in RAM */ 1472 if (rtl8xxxu_read8(priv, REG_MCU_FW_DL) & MCU_FW_RAM_SEL) 1473 rtl8xxxu_firmware_self_reset(priv); 1474 1475 /* Reset MCU */ 1476 val16 = rtl8xxxu_read16(priv, REG_SYS_FUNC); 1477 val16 &= ~SYS_FUNC_CPU_ENABLE; 1478 rtl8xxxu_write16(priv, REG_SYS_FUNC, val16); 1479 1480 /* Reset MCU ready status */ 1481 rtl8xxxu_write8(priv, REG_MCU_FW_DL, 0x00); 1482 1483 rtl8723bu_active_to_emu(priv); 1484 1485 val8 = rtl8xxxu_read8(priv, REG_APS_FSMCO + 1); 1486 val8 |= BIT(3); /* APS_FSMCO_HW_SUSPEND */ 1487 rtl8xxxu_write8(priv, REG_APS_FSMCO + 1, val8); 1488 1489 /* 0x48[16] = 1 to enable GPIO9 as EXT wakeup */ 1490 val8 = rtl8xxxu_read8(priv, REG_GPIO_INTM + 2); 1491 val8 |= BIT(0); 1492 rtl8xxxu_write8(priv, REG_GPIO_INTM + 2, val8); 1493 } 1494 1495 static void rtl8723b_enable_rf(struct rtl8xxxu_priv *priv) 1496 { 1497 struct h2c_cmd h2c; 1498 u32 val32; 1499 u8 val8; 1500 1501 val32 = rtl8xxxu_read32(priv, REG_RX_WAIT_CCA); 1502 val32 |= (BIT(22) | BIT(23)); 1503 rtl8xxxu_write32(priv, REG_RX_WAIT_CCA, val32); 1504 1505 /* 1506 * No indication anywhere as to what 0x0790 does. The 2 antenna 1507 * vendor code preserves bits 6-7 here. 1508 */ 1509 rtl8xxxu_write8(priv, 0x0790, 0x05); 1510 /* 1511 * 0x0778 seems to be related to enabling the number of antennas 1512 * In the vendor driver halbtc8723b2ant_InitHwConfig() sets it 1513 * to 0x03, while halbtc8723b1ant_InitHwConfig() sets it to 0x01 1514 */ 1515 rtl8xxxu_write8(priv, 0x0778, 0x01); 1516 1517 val8 = rtl8xxxu_read8(priv, REG_GPIO_MUXCFG); 1518 val8 |= BIT(5); 1519 rtl8xxxu_write8(priv, REG_GPIO_MUXCFG, val8); 1520 1521 rtl8xxxu_write_rfreg(priv, RF_A, RF6052_REG_IQADJ_G1, 0x780); 1522 1523 rtl8723bu_write_btreg(priv, 0x3c, 0x15); /* BT TRx Mask on */ 1524 1525 /* 1526 * Set BT grant to low 1527 */ 1528 memset(&h2c, 0, sizeof(struct h2c_cmd)); 1529 h2c.bt_grant.cmd = H2C_8723B_BT_GRANT; 1530 h2c.bt_grant.data = 0; 1531 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_grant)); 1532 1533 /* 1534 * WLAN action by PTA 1535 */ 1536 rtl8xxxu_write8(priv, REG_WLAN_ACT_CONTROL_8723B, 0x04); 1537 1538 /* 1539 * BT select S0/S1 controlled by WiFi 1540 */ 1541 val8 = rtl8xxxu_read8(priv, 0x0067); 1542 val8 |= BIT(5); 1543 rtl8xxxu_write8(priv, 0x0067, val8); 1544 1545 val32 = rtl8xxxu_read32(priv, REG_PWR_DATA); 1546 val32 |= PWR_DATA_EEPRPAD_RFE_CTRL_EN; 1547 rtl8xxxu_write32(priv, REG_PWR_DATA, val32); 1548 1549 /* 1550 * Bits 6/7 are marked in/out ... but for what? 1551 */ 1552 rtl8xxxu_write8(priv, 0x0974, 0xff); 1553 1554 val32 = rtl8xxxu_read32(priv, REG_RFE_BUFFER); 1555 val32 |= (BIT(0) | BIT(1)); 1556 rtl8xxxu_write32(priv, REG_RFE_BUFFER, val32); 1557 1558 rtl8xxxu_write8(priv, REG_RFE_CTRL_ANTA_SRC, 0x77); 1559 1560 val32 = rtl8xxxu_read32(priv, REG_LEDCFG0); 1561 val32 &= ~BIT(24); 1562 val32 |= BIT(23); 1563 rtl8xxxu_write32(priv, REG_LEDCFG0, val32); 1564 1565 /* 1566 * Fix external switch Main->S1, Aux->S0 1567 */ 1568 val8 = rtl8xxxu_read8(priv, REG_PAD_CTRL1); 1569 val8 &= ~BIT(0); 1570 rtl8xxxu_write8(priv, REG_PAD_CTRL1, val8); 1571 1572 memset(&h2c, 0, sizeof(struct h2c_cmd)); 1573 h2c.ant_sel_rsv.cmd = H2C_8723B_ANT_SEL_RSV; 1574 h2c.ant_sel_rsv.ant_inverse = 1; 1575 h2c.ant_sel_rsv.int_switch_type = 0; 1576 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ant_sel_rsv)); 1577 1578 /* 1579 * 0x280, 0x00, 0x200, 0x80 - not clear 1580 */ 1581 rtl8xxxu_write32(priv, REG_S0S1_PATH_SWITCH, 0x00); 1582 1583 /* 1584 * Software control, antenna at WiFi side 1585 */ 1586 #ifdef NEED_PS_TDMA 1587 rtl8723bu_set_ps_tdma(priv, 0x08, 0x00, 0x00, 0x00, 0x00); 1588 #endif 1589 1590 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE1, 0x55555555); 1591 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE2, 0x55555555); 1592 rtl8xxxu_write32(priv, REG_BT_COEX_TABLE3, 0x00ffffff); 1593 rtl8xxxu_write8(priv, REG_BT_COEX_TABLE4, 0x03); 1594 1595 memset(&h2c, 0, sizeof(struct h2c_cmd)); 1596 h2c.bt_info.cmd = H2C_8723B_BT_INFO; 1597 h2c.bt_info.data = BIT(0); 1598 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.bt_info)); 1599 1600 memset(&h2c, 0, sizeof(struct h2c_cmd)); 1601 h2c.ignore_wlan.cmd = H2C_8723B_BT_IGNORE_WLANACT; 1602 h2c.ignore_wlan.data = 0; 1603 rtl8xxxu_gen2_h2c_cmd(priv, &h2c, sizeof(h2c.ignore_wlan)); 1604 } 1605 1606 static void rtl8723bu_init_aggregation(struct rtl8xxxu_priv *priv) 1607 { 1608 u32 agg_rx; 1609 u8 agg_ctrl; 1610 1611 /* 1612 * For now simply disable RX aggregation 1613 */ 1614 agg_ctrl = rtl8xxxu_read8(priv, REG_TRXDMA_CTRL); 1615 agg_ctrl &= ~TRXDMA_CTRL_RXDMA_AGG_EN; 1616 1617 agg_rx = rtl8xxxu_read32(priv, REG_RXDMA_AGG_PG_TH); 1618 agg_rx &= ~RXDMA_USB_AGG_ENABLE; 1619 agg_rx &= ~0xff0f; 1620 1621 rtl8xxxu_write8(priv, REG_TRXDMA_CTRL, agg_ctrl); 1622 rtl8xxxu_write32(priv, REG_RXDMA_AGG_PG_TH, agg_rx); 1623 } 1624 1625 static void rtl8723bu_init_statistics(struct rtl8xxxu_priv *priv) 1626 { 1627 u32 val32; 1628 1629 /* Time duration for NHM unit: 4us, 0x2710=40ms */ 1630 rtl8xxxu_write16(priv, REG_NHM_TIMER_8723B + 2, 0x2710); 1631 rtl8xxxu_write16(priv, REG_NHM_TH9_TH10_8723B + 2, 0xffff); 1632 rtl8xxxu_write32(priv, REG_NHM_TH3_TO_TH0_8723B, 0xffffff52); 1633 rtl8xxxu_write32(priv, REG_NHM_TH7_TO_TH4_8723B, 0xffffffff); 1634 /* TH8 */ 1635 val32 = rtl8xxxu_read32(priv, REG_FPGA0_IQK); 1636 val32 |= 0xff; 1637 rtl8xxxu_write32(priv, REG_FPGA0_IQK, val32); 1638 /* Enable CCK */ 1639 val32 = rtl8xxxu_read32(priv, REG_NHM_TH9_TH10_8723B); 1640 val32 |= BIT(8) | BIT(9) | BIT(10); 1641 rtl8xxxu_write32(priv, REG_NHM_TH9_TH10_8723B, val32); 1642 /* Max power amongst all RX antennas */ 1643 val32 = rtl8xxxu_read32(priv, REG_OFDM0_FA_RSTC); 1644 val32 |= BIT(7); 1645 rtl8xxxu_write32(priv, REG_OFDM0_FA_RSTC, val32); 1646 } 1647 1648 struct rtl8xxxu_fileops rtl8723bu_fops = { 1649 .parse_efuse = rtl8723bu_parse_efuse, 1650 .load_firmware = rtl8723bu_load_firmware, 1651 .power_on = rtl8723bu_power_on, 1652 .power_off = rtl8723bu_power_off, 1653 .reset_8051 = rtl8723bu_reset_8051, 1654 .llt_init = rtl8xxxu_auto_llt_table, 1655 .init_phy_bb = rtl8723bu_init_phy_bb, 1656 .init_phy_rf = rtl8723bu_init_phy_rf, 1657 .phy_init_antenna_selection = rtl8723bu_phy_init_antenna_selection, 1658 .phy_iq_calibrate = rtl8723bu_phy_iq_calibrate, 1659 .config_channel = rtl8xxxu_gen2_config_channel, 1660 .parse_rx_desc = rtl8xxxu_parse_rxdesc24, 1661 .init_aggregation = rtl8723bu_init_aggregation, 1662 .init_statistics = rtl8723bu_init_statistics, 1663 .enable_rf = rtl8723b_enable_rf, 1664 .disable_rf = rtl8xxxu_gen2_disable_rf, 1665 .usb_quirks = rtl8xxxu_gen2_usb_quirks, 1666 .set_tx_power = rtl8723b_set_tx_power, 1667 .update_rate_mask = rtl8xxxu_gen2_update_rate_mask, 1668 .report_connect = rtl8xxxu_gen2_report_connect, 1669 .fill_txdesc = rtl8xxxu_fill_txdesc_v2, 1670 .writeN_block_size = 1024, 1671 .tx_desc_size = sizeof(struct rtl8xxxu_txdesc40), 1672 .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), 1673 .has_s0s1 = 1, 1674 .has_tx_report = 1, 1675 .gen2_thermal_meter = 1, 1676 .adda_1t_init = 0x01c00014, 1677 .adda_1t_path_on = 0x01c00014, 1678 .adda_2t_path_on_a = 0x01c00014, 1679 .adda_2t_path_on_b = 0x01c00014, 1680 .trxff_boundary = 0x3f7f, 1681 .pbp_rx = PBP_PAGE_SIZE_256, 1682 .pbp_tx = PBP_PAGE_SIZE_256, 1683 .mactable = rtl8723b_mac_init_table, 1684 .total_page_num = TX_TOTAL_PAGE_NUM_8723B, 1685 .page_num_hi = TX_PAGE_NUM_HI_PQ_8723B, 1686 .page_num_lo = TX_PAGE_NUM_LO_PQ_8723B, 1687 .page_num_norm = TX_PAGE_NUM_NORM_PQ_8723B, 1688 }; 1689