1 // SPDX-License-Identifier: GPL-2.0-only 2 3 /* Radio tuning for RTL8225 on RTL8187SE 4 * 5 * Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net> 6 * Copyright 2014 Andrea Merello <andrea.merello@gmail.com> 7 * 8 * Based on the r8180 and Realtek r8187se drivers, which are: 9 * Copyright 2004-2005 Andrea Merello <andrea.merello@gmail.com>, et al. 10 * 11 * Also based on the rtl8187 driver, which is: 12 * Copyright 2007 Michael Wu <flamingice@sourmilk.net> 13 * Copyright 2007 Andrea Merello <andrea.merello@gmail.com> 14 */ 15 16 #include <net/mac80211.h> 17 18 #include "rtl8180.h" 19 #include "rtl8225se.h" 20 21 #define PFX "rtl8225 (se) " 22 23 static const u32 RF_GAIN_TABLE[] = { 24 0x0096, 0x0076, 0x0056, 0x0036, 0x0016, 0x01f6, 0x01d6, 0x01b6, 25 0x0196, 0x0176, 0x00F7, 0x00D7, 0x00B7, 0x0097, 0x0077, 0x0057, 26 0x0037, 0x00FB, 0x00DB, 0x00BB, 0x00FF, 0x00E3, 0x00C3, 0x00A3, 27 0x0083, 0x0063, 0x0043, 0x0023, 0x0003, 0x01E3, 0x01C3, 0x01A3, 28 0x0183, 0x0163, 0x0143, 0x0123, 0x0103 29 }; 30 31 static const u8 cck_ofdm_gain_settings[] = { 32 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 33 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 34 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 35 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, 36 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 37 0x1e, 0x1f, 0x20, 0x21, 0x22, 0x23, 38 }; 39 40 static const u32 rtl8225se_chan[] = { 41 0x0080, 0x0100, 0x0180, 0x0200, 0x0280, 0x0300, 0x0380, 42 0x0400, 0x0480, 0x0500, 0x0580, 0x0600, 0x0680, 0x074A, 43 }; 44 45 static const u8 ZEBRA_AGC[] = { 46 0x7E, 0x7E, 0x7E, 0x7E, 0x7D, 0x7C, 0x7B, 0x7A, 47 0x79, 0x78, 0x77, 0x76, 0x75, 0x74, 0x73, 0x72, 48 0x71, 0x70, 0x6F, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 49 0x69, 0x68, 0x67, 0x66, 0x65, 0x64, 0x63, 0x62, 50 0x48, 0x47, 0x46, 0x45, 0x44, 0x29, 0x28, 0x27, 51 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x08, 0x07, 52 0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x00, 53 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 54 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 55 0x0f, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x15, 0x16, 56 0x17, 0x17, 0x18, 0x18, 0x19, 0x1a, 0x1a, 0x1b, 57 0x1b, 0x1c, 0x1c, 0x1d, 0x1d, 0x1d, 0x1e, 0x1e, 58 0x1f, 0x1f, 0x1f, 0x20, 0x20, 0x20, 0x20, 0x21, 59 0x21, 0x21, 0x22, 0x22, 0x22, 0x23, 0x23, 0x24, 60 0x24, 0x25, 0x25, 0x25, 0x26, 0x26, 0x27, 0x27, 61 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F, 0x2F 62 }; 63 64 static const u8 OFDM_CONFIG[] = { 65 0x10, 0x0F, 0x0A, 0x0C, 0x14, 0xFA, 0xFF, 0x50, 66 0x00, 0x50, 0x00, 0x00, 0x00, 0x5C, 0x00, 0x00, 67 0x40, 0x00, 0x40, 0x00, 0x00, 0x00, 0xA8, 0x26, 68 0x32, 0x33, 0x06, 0xA5, 0x6F, 0x55, 0xC8, 0xBB, 69 0x0A, 0xE1, 0x2C, 0x4A, 0x86, 0x83, 0x34, 0x00, 70 0x4F, 0x24, 0x6F, 0xC2, 0x03, 0x40, 0x80, 0x00, 71 0xC0, 0xC1, 0x58, 0xF1, 0x00, 0xC4, 0x90, 0x3e, 72 0xD8, 0x3C, 0x7B, 0x10, 0x10 73 }; 74 75 static void rtl8187se_three_wire_io(struct ieee80211_hw *dev, u8 *data, 76 u8 len, bool write) 77 { 78 struct rtl8180_priv *priv = dev->priv; 79 int i; 80 u8 tmp; 81 82 do { 83 for (i = 0; i < 5; i++) { 84 tmp = rtl818x_ioread8(priv, SW_3W_CMD1); 85 if (!(tmp & 0x3)) 86 break; 87 udelay(10); 88 } 89 if (i == 5) 90 wiphy_err(dev->wiphy, PFX 91 "CmdReg: 0x%x RE/WE bits aren't clear\n", tmp); 92 93 tmp = rtl818x_ioread8(priv, &priv->map->rf_sw_config) | 0x02; 94 rtl818x_iowrite8(priv, &priv->map->rf_sw_config, tmp); 95 96 tmp = rtl818x_ioread8(priv, REG_ADDR1(0x84)) & 0xF7; 97 rtl818x_iowrite8(priv, REG_ADDR1(0x84), tmp); 98 if (write) { 99 if (len == 16) { 100 rtl818x_iowrite16(priv, SW_3W_DB0, 101 *(u16 *)data); 102 } else if (len == 64) { 103 rtl818x_iowrite32(priv, SW_3W_DB0_4, 104 *((u32 *)data)); 105 rtl818x_iowrite32(priv, SW_3W_DB1_4, 106 *((u32 *)(data + 4))); 107 } else 108 wiphy_err(dev->wiphy, PFX 109 "Unimplemented length\n"); 110 } else { 111 rtl818x_iowrite16(priv, SW_3W_DB0, *(u16 *)data); 112 } 113 if (write) 114 tmp = 2; 115 else 116 tmp = 1; 117 rtl818x_iowrite8(priv, SW_3W_CMD1, tmp); 118 for (i = 0; i < 5; i++) { 119 tmp = rtl818x_ioread8(priv, SW_3W_CMD1); 120 if (!(tmp & 0x3)) 121 break; 122 udelay(10); 123 } 124 rtl818x_iowrite8(priv, SW_3W_CMD1, 0); 125 if (!write) { 126 *((u16 *)data) = rtl818x_ioread16(priv, SI_DATA_REG); 127 *((u16 *)data) &= 0x0FFF; 128 } 129 } while (0); 130 } 131 132 static u32 rtl8187se_rf_readreg(struct ieee80211_hw *dev, u8 addr) 133 { 134 u32 dataread = addr & 0x0F; 135 rtl8187se_three_wire_io(dev, (u8 *)&dataread, 16, 0); 136 return dataread; 137 } 138 139 static void rtl8187se_rf_writereg(struct ieee80211_hw *dev, u8 addr, u32 data) 140 { 141 u32 outdata = (data << 4) | (u32)(addr & 0x0F); 142 rtl8187se_three_wire_io(dev, (u8 *)&outdata, 16, 1); 143 } 144 145 146 static void rtl8225se_write_zebra_agc(struct ieee80211_hw *dev) 147 { 148 int i; 149 150 for (i = 0; i < 128; i++) { 151 rtl8225se_write_phy_ofdm(dev, 0xF, ZEBRA_AGC[i]); 152 rtl8225se_write_phy_ofdm(dev, 0xE, i+0x80); 153 rtl8225se_write_phy_ofdm(dev, 0xE, 0); 154 } 155 } 156 157 static void rtl8187se_write_ofdm_config(struct ieee80211_hw *dev) 158 { 159 /* write OFDM_CONFIG table */ 160 int i; 161 162 for (i = 0; i < 60; i++) 163 rtl8225se_write_phy_ofdm(dev, i, OFDM_CONFIG[i]); 164 165 } 166 167 static void rtl8225sez2_rf_set_tx_power(struct ieee80211_hw *dev, int channel) 168 { 169 struct rtl8180_priv *priv = dev->priv; 170 u8 cck_power, ofdm_power; 171 172 cck_power = priv->channels[channel - 1].hw_value & 0xFF; 173 if (cck_power > 35) 174 cck_power = 35; 175 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 176 cck_ofdm_gain_settings[cck_power]); 177 178 usleep_range(1000, 5000); 179 ofdm_power = priv->channels[channel - 1].hw_value >> 8; 180 if (ofdm_power > 35) 181 ofdm_power = 35; 182 183 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 184 cck_ofdm_gain_settings[ofdm_power]); 185 if (ofdm_power < 12) { 186 rtl8225se_write_phy_ofdm(dev, 7, 0x5C); 187 rtl8225se_write_phy_ofdm(dev, 9, 0x5C); 188 } 189 if (ofdm_power < 18) { 190 rtl8225se_write_phy_ofdm(dev, 7, 0x54); 191 rtl8225se_write_phy_ofdm(dev, 9, 0x54); 192 } else { 193 rtl8225se_write_phy_ofdm(dev, 7, 0x50); 194 rtl8225se_write_phy_ofdm(dev, 9, 0x50); 195 } 196 197 usleep_range(1000, 5000); 198 } 199 200 static void rtl8187se_write_rf_gain(struct ieee80211_hw *dev) 201 { 202 int i; 203 204 for (i = 0; i <= 36; i++) { 205 rtl8187se_rf_writereg(dev, 0x01, i); mdelay(1); 206 rtl8187se_rf_writereg(dev, 0x02, RF_GAIN_TABLE[i]); mdelay(1); 207 } 208 } 209 210 static void rtl8187se_write_initial_gain(struct ieee80211_hw *dev, 211 int init_gain) 212 { 213 switch (init_gain) { 214 default: 215 rtl8225se_write_phy_ofdm(dev, 0x17, 0x26); mdelay(1); 216 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); 217 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); 218 break; 219 case 2: 220 rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); 221 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); 222 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFA); mdelay(1); 223 break; 224 case 3: 225 rtl8225se_write_phy_ofdm(dev, 0x17, 0x36); mdelay(1); 226 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); 227 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); 228 break; 229 case 4: 230 rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); 231 rtl8225se_write_phy_ofdm(dev, 0x24, 0x86); mdelay(1); 232 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); 233 break; 234 case 5: 235 rtl8225se_write_phy_ofdm(dev, 0x17, 0x46); mdelay(1); 236 rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); 237 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFB); mdelay(1); 238 break; 239 case 6: 240 rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); 241 rtl8225se_write_phy_ofdm(dev, 0x24, 0x96); mdelay(1); 242 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); 243 break; 244 case 7: 245 rtl8225se_write_phy_ofdm(dev, 0x17, 0x56); mdelay(1); 246 rtl8225se_write_phy_ofdm(dev, 0x24, 0xA6); mdelay(1); 247 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); 248 break; 249 case 8: 250 rtl8225se_write_phy_ofdm(dev, 0x17, 0x66); mdelay(1); 251 rtl8225se_write_phy_ofdm(dev, 0x24, 0xB6); mdelay(1); 252 rtl8225se_write_phy_ofdm(dev, 0x05, 0xFC); mdelay(1); 253 break; 254 } 255 } 256 257 void rtl8225se_rf_init(struct ieee80211_hw *dev) 258 { 259 struct rtl8180_priv *priv = dev->priv; 260 u32 rf23, rf24; 261 u8 d_cut = 0; 262 u8 tmp; 263 264 /* Page 1 */ 265 rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); 266 rf23 = rtl8187se_rf_readreg(dev, 0x08); mdelay(1); 267 rf24 = rtl8187se_rf_readreg(dev, 0x09); mdelay(1); 268 if (rf23 == 0x0818 && rf24 == 0x070C) 269 d_cut = 1; 270 271 wiphy_info(dev->wiphy, "RTL8225-SE version %s\n", 272 d_cut ? "D" : "not-D"); 273 274 /* Page 0: reg 0 - 15 */ 275 rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); 276 rtl8187se_rf_writereg(dev, 0x01, 0x06E0); mdelay(1); 277 rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); 278 rtl8187se_rf_writereg(dev, 0x03, 0x07F1); mdelay(1); 279 rtl8187se_rf_writereg(dev, 0x04, 0x0975); mdelay(1); 280 rtl8187se_rf_writereg(dev, 0x05, 0x0C72); mdelay(1); 281 rtl8187se_rf_writereg(dev, 0x06, 0x0AE6); mdelay(1); 282 rtl8187se_rf_writereg(dev, 0x07, 0x00CA); mdelay(1); 283 rtl8187se_rf_writereg(dev, 0x08, 0x0E1C); mdelay(1); 284 rtl8187se_rf_writereg(dev, 0x09, 0x02F0); mdelay(1); 285 rtl8187se_rf_writereg(dev, 0x0A, 0x09D0); mdelay(1); 286 rtl8187se_rf_writereg(dev, 0x0B, 0x01BA); mdelay(1); 287 rtl8187se_rf_writereg(dev, 0x0C, 0x0640); mdelay(1); 288 rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); 289 rtl8187se_rf_writereg(dev, 0x0E, 0x0020); mdelay(1); 290 rtl8187se_rf_writereg(dev, 0x0F, 0x0990); mdelay(1); 291 /* page 1: reg 16-30 */ 292 rtl8187se_rf_writereg(dev, 0x00, 0x013F); mdelay(1); 293 rtl8187se_rf_writereg(dev, 0x03, 0x0806); mdelay(1); 294 rtl8187se_rf_writereg(dev, 0x04, 0x03A7); mdelay(1); 295 rtl8187se_rf_writereg(dev, 0x05, 0x059B); mdelay(1); 296 rtl8187se_rf_writereg(dev, 0x06, 0x0081); mdelay(1); 297 rtl8187se_rf_writereg(dev, 0x07, 0x01A0); mdelay(1); 298 rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); 299 rtl8187se_rf_writereg(dev, 0x0B, 0x0418); mdelay(1); 300 rtl8187se_rf_writereg(dev, 0x0C, 0x0FBE); mdelay(1); 301 rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(1); 302 if (d_cut) 303 rtl8187se_rf_writereg(dev, 0x0E, 0x0807); 304 else 305 rtl8187se_rf_writereg(dev, 0x0E, 0x0806); 306 mdelay(1); 307 rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); mdelay(1); 308 rtl8187se_rf_writereg(dev, 0x00, 0x01D7); mdelay(1); 309 rtl8187se_rf_writereg(dev, 0x03, 0x0E00); mdelay(1); 310 rtl8187se_rf_writereg(dev, 0x04, 0x0E50); mdelay(1); 311 312 rtl8187se_write_rf_gain(dev); 313 314 rtl8187se_rf_writereg(dev, 0x05, 0x0203); mdelay(1); 315 rtl8187se_rf_writereg(dev, 0x06, 0x0200); mdelay(1); 316 rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); 317 rtl8187se_rf_writereg(dev, 0x0D, 0x0008); mdelay(11); 318 rtl8187se_rf_writereg(dev, 0x00, 0x0037); mdelay(11); 319 rtl8187se_rf_writereg(dev, 0x04, 0x0160); mdelay(11); 320 rtl8187se_rf_writereg(dev, 0x07, 0x0080); mdelay(11); 321 rtl8187se_rf_writereg(dev, 0x02, 0x088D); msleep(221); 322 rtl8187se_rf_writereg(dev, 0x00, 0x0137); mdelay(11); 323 rtl8187se_rf_writereg(dev, 0x07, 0x0000); mdelay(1); 324 rtl8187se_rf_writereg(dev, 0x07, 0x0180); mdelay(1); 325 rtl8187se_rf_writereg(dev, 0x07, 0x0220); mdelay(1); 326 rtl8187se_rf_writereg(dev, 0x07, 0x03E0); mdelay(1); 327 rtl8187se_rf_writereg(dev, 0x06, 0x00C1); mdelay(1); 328 rtl8187se_rf_writereg(dev, 0x0A, 0x0001); mdelay(1); 329 if (priv->xtal_cal) { 330 tmp = (priv->xtal_in << 4) | (priv->xtal_out << 1) | 331 (1 << 11) | (1 << 9); 332 rtl8187se_rf_writereg(dev, 0x0F, tmp); 333 wiphy_info(dev->wiphy, "Xtal cal\n"); 334 mdelay(1); 335 } else { 336 wiphy_info(dev->wiphy, "NO Xtal cal\n"); 337 rtl8187se_rf_writereg(dev, 0x0F, 0x0ACC); 338 mdelay(1); 339 } 340 /* page 0 */ 341 rtl8187se_rf_writereg(dev, 0x00, 0x00BF); mdelay(1); 342 rtl8187se_rf_writereg(dev, 0x0D, 0x08DF); mdelay(1); 343 rtl8187se_rf_writereg(dev, 0x02, 0x004D); mdelay(1); 344 rtl8187se_rf_writereg(dev, 0x04, 0x0975); msleep(31); 345 rtl8187se_rf_writereg(dev, 0x00, 0x0197); mdelay(1); 346 rtl8187se_rf_writereg(dev, 0x05, 0x05AB); mdelay(1); 347 348 rtl8187se_rf_writereg(dev, 0x00, 0x009F); mdelay(1); 349 rtl8187se_rf_writereg(dev, 0x01, 0x0000); mdelay(1); 350 rtl8187se_rf_writereg(dev, 0x02, 0x0000); mdelay(1); 351 /* power save parameters */ 352 /* TODO: move to dev.c */ 353 rtl818x_iowrite8(priv, REG_ADDR1(0x024E), 354 rtl818x_ioread8(priv, REG_ADDR1(0x24E)) & 0x9F); 355 rtl8225se_write_phy_cck(dev, 0x00, 0xC8); 356 rtl8225se_write_phy_cck(dev, 0x06, 0x1C); 357 rtl8225se_write_phy_cck(dev, 0x10, 0x78); 358 rtl8225se_write_phy_cck(dev, 0x2E, 0xD0); 359 rtl8225se_write_phy_cck(dev, 0x2F, 0x06); 360 rtl8225se_write_phy_cck(dev, 0x01, 0x46); 361 362 /* power control */ 363 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK, 0x10); 364 rtl818x_iowrite8(priv, &priv->map->TX_GAIN_OFDM, 0x1B); 365 366 rtl818x_iowrite8(priv, &priv->map->TX_ANTENNA, 0x03); 367 rtl8225se_write_phy_ofdm(dev, 0x00, 0x12); 368 369 rtl8225se_write_zebra_agc(dev); 370 371 rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); 372 373 rtl8187se_write_ofdm_config(dev); 374 375 /* turn on RF */ 376 rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); 377 rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); 378 /* turn on RF again */ 379 rtl8187se_rf_writereg(dev, 0x00, 0x009F); udelay(500); 380 rtl8187se_rf_writereg(dev, 0x04, 0x0972); udelay(500); 381 /* turn on BB */ 382 rtl8225se_write_phy_ofdm(dev, 0x10, 0x40); 383 rtl8225se_write_phy_ofdm(dev, 0x12, 0x40); 384 385 rtl8187se_write_initial_gain(dev, 4); 386 } 387 388 void rtl8225se_rf_stop(struct ieee80211_hw *dev) 389 { 390 /* checked for 8187se */ 391 struct rtl8180_priv *priv = dev->priv; 392 393 /* turn off BB RXIQ matrix to cut off rx signal */ 394 rtl8225se_write_phy_ofdm(dev, 0x10, 0x00); 395 rtl8225se_write_phy_ofdm(dev, 0x12, 0x00); 396 /* turn off RF */ 397 rtl8187se_rf_writereg(dev, 0x04, 0x0000); 398 rtl8187se_rf_writereg(dev, 0x00, 0x0000); 399 400 usleep_range(1000, 5000); 401 /* turn off A/D and D/A */ 402 rtl8180_set_anaparam(priv, RTL8225SE_ANAPARAM_OFF); 403 rtl8180_set_anaparam2(priv, RTL8225SE_ANAPARAM2_OFF); 404 } 405 406 void rtl8225se_rf_set_channel(struct ieee80211_hw *dev, 407 struct ieee80211_conf *conf) 408 { 409 int chan = 410 ieee80211_frequency_to_channel(conf->chandef.chan->center_freq); 411 412 rtl8225sez2_rf_set_tx_power(dev, chan); 413 rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); 414 if ((rtl8187se_rf_readreg(dev, 0x7) & 0x0F80) != 415 rtl8225se_chan[chan - 1]) 416 rtl8187se_rf_writereg(dev, 0x7, rtl8225se_chan[chan - 1]); 417 usleep_range(10000, 20000); 418 } 419 420 static const struct rtl818x_rf_ops rtl8225se_ops = { 421 .name = "rtl8225-se", 422 .init = rtl8225se_rf_init, 423 .stop = rtl8225se_rf_stop, 424 .set_chan = rtl8225se_rf_set_channel, 425 }; 426 427 const struct rtl818x_rf_ops *rtl8187se_detect_rf(struct ieee80211_hw *dev) 428 { 429 return &rtl8225se_ops; 430 } 431